1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved. 24 */ 25 /* 26 * Copyright 2019 Joyent, Inc. 27 */ 28 29 #ifndef _LIBTOPO_H 30 #define _LIBTOPO_H 31 32 #include <sys/nvpair.h> 33 #include <stdio.h> 34 #include <libdevinfo.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 41 42 typedef struct topo_hdl topo_hdl_t; 43 typedef struct topo_node tnode_t; 44 typedef struct topo_walk topo_walk_t; 45 typedef int32_t topo_instance_t; 46 typedef uint32_t topo_version_t; 47 48 typedef struct topo_list { 49 struct topo_list *l_prev; 50 struct topo_list *l_next; 51 } topo_list_t; 52 53 typedef struct topo_faclist { 54 topo_list_t tf_list; 55 tnode_t *tf_node; 56 } topo_faclist_t; 57 58 /* 59 * The following functions, error codes and data structures are private 60 * to libtopo snapshot consumers and enumerator modules. 61 */ 62 extern topo_hdl_t *topo_open(int, const char *, int *); 63 extern void topo_close(topo_hdl_t *); 64 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 65 extern void topo_snap_release(topo_hdl_t *); 66 67 /* 68 * Snapshot walker support 69 */ 70 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 71 72 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 73 void *, int *); 74 extern int topo_walk_step(topo_walk_t *, int); 75 extern void topo_walk_fini(topo_walk_t *); 76 extern di_node_t topo_hdl_devinfo(topo_hdl_t *); 77 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *); 78 79 /* 80 * Walk status returned from walker 81 */ 82 #define TOPO_WALK_ERR -1 83 #define TOPO_WALK_NEXT 0 84 #define TOPO_WALK_TERMINATE 1 85 86 /* 87 * Types of walks: depth-first (child) or breadth-first (sibling) 88 */ 89 #define TOPO_WALK_CHILD 0x0001 90 #define TOPO_WALK_SIBLING 0x0002 91 92 /* 93 * FMRI helper routines 94 */ 95 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 96 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 97 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 98 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 99 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 100 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 101 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 102 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 103 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 104 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 105 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 106 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 107 int *); 108 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 109 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 110 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 111 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 112 uint32_t, topo_walk_cb_t, void *, int *); 113 114 /* 115 * Consolidation private utility functions 116 */ 117 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 118 extern ulong_t topo_fmri_strhash_noauth(topo_hdl_t *, const char *); 119 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 120 extern boolean_t topo_fmri_strcmp_noauth(topo_hdl_t *, const char *, 121 const char *); 122 123 /* 124 * Topo node utilities: callable from topo_walk_step() callback or module 125 * enumeration, topo_mod_enumerate() 126 */ 127 extern char *topo_node_name(tnode_t *); 128 extern topo_instance_t topo_node_instance(tnode_t *); 129 extern tnode_t *topo_node_parent(tnode_t *); 130 extern void *topo_node_private(tnode_t *); 131 extern int topo_node_flags(tnode_t *); 132 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 133 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 134 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 135 extern int topo_node_label(tnode_t *, char **, int *); 136 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 137 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 138 nvlist_t *, nvlist_t **, int *); 139 extern boolean_t topo_method_supported(tnode_t *, const char *, 140 topo_version_t); 141 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 142 uint32_t, topo_faclist_t *, int *); 143 extern int topo_node_child_walk(topo_hdl_t *, tnode_t *, topo_walk_cb_t, 144 void *, int *); 145 extern int topo_node_occupied(tnode_t *, boolean_t *); 146 147 /* 148 * Node flags: denotes type of node 149 */ 150 #define TOPO_NODE_DEFAULT 0 151 #define TOPO_NODE_FACILITY 1 152 153 #define TOPO_FAC_TYPE_SENSOR "sensor" 154 #define TOPO_FAC_TYPE_INDICATOR "indicator" 155 156 /* 157 * Topo property get functions 158 */ 159 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 160 int32_t *, int *); 161 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 162 uint32_t *, int *); 163 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 164 int64_t *, int *); 165 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 166 uint64_t *, int *); 167 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 168 double *, int *); 169 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 170 char **, int *); 171 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 172 nvlist_t **, int *); 173 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 174 int32_t **, uint_t *, int *); 175 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 176 uint32_t **, uint_t *, int *); 177 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 178 int64_t **, uint_t *, int *); 179 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 180 uint64_t **, uint_t *, int *); 181 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 182 char ***, uint_t *, int *); 183 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 184 nvlist_t ***, uint_t *, int *); 185 186 /* 187 * Topo property set functions 188 */ 189 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 190 int32_t, int *); 191 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 192 uint32_t, int *); 193 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 194 int, int64_t, int *); 195 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 196 int, uint64_t, int *); 197 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 198 int, double, int *); 199 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 200 int, const char *, int *); 201 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 202 int, const nvlist_t *, int *); 203 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 204 int32_t *, uint_t, int *); 205 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 206 int, uint32_t *, uint_t, int *); 207 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 208 int, int64_t *, uint_t, int *); 209 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 210 int, uint64_t *, uint_t, int *); 211 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 212 int, const char **, uint_t, int *); 213 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 214 int, const nvlist_t **, uint_t, int *); 215 216 #define TOPO_PROP_IMMUTABLE 0 217 #define TOPO_PROP_MUTABLE 0x01 218 #define TOPO_PROP_NONVOLATILE 0x02 219 220 /* Protocol property group and property names */ 221 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 222 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 223 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 224 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 225 #define TOPO_PROP_MOD "module" /* software module FMRI */ 226 #define TOPO_PROP_PKG "package" /* software package FMRI */ 227 #define TOPO_PROP_LABEL "label" /* property LABEL */ 228 229 #define TOPO_METH_FAC_ENUM "fac_enum" 230 231 /* 232 * System property group 233 */ 234 #define TOPO_PGROUP_SYSTEM "system" 235 #define TOPO_PROP_ISA "isa" 236 #define TOPO_PROP_MACHINE "machine" 237 238 #define TOPO_PGROUP_IPMI "ipmi" 239 240 /* 241 * These enum definitions are used to define a set of error tags associated with 242 * libtopo error conditions occuring during the adminstration of 243 * properties, invocation of methods and fmri-based queries. The shell script 244 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 245 * source file. 246 * 247 * If you do something other than add a new error tag here, you may need to 248 * update the mkerror shell script as it is based upon simple regexps. 249 */ 250 typedef enum topo_prop_errno { 251 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 252 ETOPO_PROP_NOENT, /* undefined property or property group */ 253 ETOPO_PROP_DEFD, /* static property already defined */ 254 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 255 ETOPO_PROP_TYPE, /* invalid property type */ 256 ETOPO_PROP_NAME, /* invalid property name */ 257 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 258 ETOPO_PROP_NVL, /* malformed property nvlist */ 259 ETOPO_PROP_METHOD, /* get property method failed */ 260 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 261 } topo_prop_errno_t; 262 263 typedef enum topo_method_errno { 264 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 265 ETOPO_METHOD_INVAL, /* invalid method registration */ 266 ETOPO_METHOD_NOTSUP, /* method not supported */ 267 ETOPO_METHOD_FAIL, /* method failed */ 268 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 269 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 270 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 271 ETOPO_METHOD_DEFD, /* method op already defined */ 272 ETOPO_METHOD_END /* end of method errno list */ 273 } topo_method_errno_t; 274 275 typedef enum topo_fmri_errno { 276 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 277 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 278 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 279 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 280 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 281 ETOPO_FMRI_END /* end of fmri errno list */ 282 } topo_fmri_errno_t; 283 284 typedef enum topo_hdl_errno { 285 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 286 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 287 ETOPO_HDL_SNAP, /* snapshot already taken */ 288 ETOPO_HDL_INVAL, /* invalid argument specified */ 289 ETOPO_HDL_UUID, /* uuid already set */ 290 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 291 ETOPO_HDL_END /* end of handle errno list */ 292 } topo_hdl_errno_t; 293 294 extern const char *topo_strerror(int); 295 extern void topo_hdl_strfree(topo_hdl_t *, char *); 296 extern void topo_hdl_strfreev(topo_hdl_t *, char **, uint_t); 297 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 298 299 /* 300 * The following functions and data structures to support property 301 * observability are private to the fmtopo command. 302 */ 303 304 /* 305 * Each topology node advertises the name and data stability of each of its 306 * modules and properties. (see attributes(5)). 307 */ 308 309 /* 310 * Topo stability attributes 311 */ 312 typedef enum topo_stability { 313 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 314 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 315 TOPO_STABILITY_PRIVATE, /* private to Sun */ 316 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 317 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 318 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 319 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 320 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 321 TOPO_STABILITY_STANDARD /* industry standard */ 322 } topo_stability_t; 323 324 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 325 326 typedef struct topo_pgroup_info { 327 const char *tpi_name; /* property group name */ 328 topo_stability_t tpi_namestab; /* stability of group name */ 329 topo_stability_t tpi_datastab; /* stability of all property values */ 330 topo_version_t tpi_version; /* version of pgroup definition */ 331 } topo_pgroup_info_t; 332 333 extern topo_stability_t topo_name2stability(const char *); 334 extern const char *topo_stability2name(topo_stability_t); 335 extern void topo_pgroup_destroy(tnode_t *, const char *); 336 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 337 338 typedef enum { 339 TOPO_TYPE_INVALID = 0, 340 TOPO_TYPE_BOOLEAN, /* boolean */ 341 TOPO_TYPE_INT32, /* int32_t */ 342 TOPO_TYPE_UINT32, /* uint32_t */ 343 TOPO_TYPE_INT64, /* int64_t */ 344 TOPO_TYPE_UINT64, /* uint64_t */ 345 TOPO_TYPE_STRING, /* const char* */ 346 TOPO_TYPE_TIME, /* uint64_t */ 347 TOPO_TYPE_SIZE, /* uint64_t */ 348 TOPO_TYPE_FMRI, /* nvlist_t */ 349 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 350 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 351 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 352 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 353 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 354 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 355 TOPO_TYPE_DOUBLE /* double */ 356 } topo_type_t; 357 358 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 359 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 360 nvlist_t *, nvlist_t **, int *); 361 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 362 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 363 int, nvlist_t *, int *); 364 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 365 const char *, nvlist_t *, nvlist_t **, int *); 366 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 367 nvlist_t **, int *); 368 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 369 nvlist_t *, int, nvlist_t *, int *); 370 extern void topo_pgroup_hcset(tnode_t *, nvlist_t *); 371 372 /* Property node NVL names used in topo_prop_getprops */ 373 #define TOPO_PROP_GROUP "property-group" 374 #define TOPO_PROP_GROUP_NAME "property-group-name" 375 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 376 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 377 #define TOPO_PROP_GROUP_VERSION "property-group-version" 378 #define TOPO_PROP_VAL "property" 379 #define TOPO_PROP_VAL_NAME "property-name" 380 #define TOPO_PROP_VAL_VAL "property-value" 381 #define TOPO_PROP_VAL_TYPE "property-type" 382 #define TOPO_PROP_FLAG "property-flag" 383 384 /* 385 * ARGS list used in topo property methods 386 */ 387 #define TOPO_PROP_ARGS "args" 388 #define TOPO_PROP_PARGS "private-args" 389 390 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 391 392 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 393 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 394 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 395 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 396 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 397 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 398 399 /* 400 * Interfaces for converting sensor/indicator types, units, states, etc to 401 * a string 402 */ 403 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 404 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 405 void topo_led_type_name(uint8_t type, char *buf, size_t len); 406 void topo_led_state_name(uint8_t type, char *buf, size_t len); 407 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 408 size_t len); 409 410 /* 411 * Defines for standard properties for sensors and indicators 412 */ 413 #define TOPO_PGROUP_FACILITY "facility" 414 415 #define TOPO_SENSOR_READING "reading" 416 #define TOPO_SENSOR_STATE "state" 417 #define TOPO_SENSOR_CLASS "sensor-class" 418 #define TOPO_FACILITY_TYPE "type" 419 #define TOPO_SENSOR_UNITS "units" 420 #define TOPO_LED_MODE "mode" 421 422 #define TOPO_PROP_THRESHOLD_LNC "threshold-lower-non-critical" 423 #define TOPO_PROP_THRESHOLD_LCR "threshold-lower-critical" 424 #define TOPO_PROP_THRESHOLD_LNR "threshold-lower-non-recoverable" 425 426 #define TOPO_PROP_THRESHOLD_UNC "threshold-upper-non-critical" 427 #define TOPO_PROP_THRESHOLD_UCR "threshold-upper-critical" 428 #define TOPO_PROP_THRESHOLD_UNR "threshold-upper-non-recoverable" 429 430 /* 431 * Sensor Classes 432 * 433 * The "sensor-class" property in the "facility" propgroup on 434 * facility nodes of type "sensor" should be set to one of these 435 * two values. 436 * 437 * Threshold sensors provide an analog sensor reading via the 438 * "reading" property in the facility propgroup. They will also 439 * provide one or more discrete states via the "state" property 440 * in the facility propgroup. 441 * 442 * Discrete sensors will not provide an analog reading by will 443 * provide one or more discrete states via the "state" property 444 * in the facility propgroup. 445 */ 446 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 447 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 448 449 /* 450 * Sensor unit types. We're using the unit types and corresponding 451 * codes described in section 43.17 of the IPMI 2.0 as a reference as it seems 452 * to be a reasonably comprehensive list. This also simplifies the IPMI 453 * facility provider code since the unit type codes will map exactly to what 454 * libtopo uses (so no conversion necessary). To allow for future growth if 455 * new unit types are added to IPMI in the future, while still allowing unit 456 * types not supported by IPMI to be represented, we include a gap between 457 * the last IPMI unit type and the first non-IPMI unit type. 458 */ 459 typedef enum topo_sensor_unit { 460 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 461 TOPO_SENSOR_UNITS_DEGREES_C, 462 TOPO_SENSOR_UNITS_DEGREES_F, 463 TOPO_SENSOR_UNITS_DEGREES_K, 464 TOPO_SENSOR_UNITS_VOLTS, 465 TOPO_SENSOR_UNITS_AMPS, 466 TOPO_SENSOR_UNITS_WATTS, 467 TOPO_SENSOR_UNITS_JOULES, 468 TOPO_SENSOR_UNITS_COULOMBS, 469 TOPO_SENSOR_UNITS_VA, 470 TOPO_SENSOR_UNITS_NITS, 471 TOPO_SENSOR_UNITS_LUMEN, 472 TOPO_SENSOR_UNITS_LUX, 473 TOPO_SENSOR_UNITS_CANDELA, 474 TOPO_SENSOR_UNITS_KPA, 475 TOPO_SENSOR_UNITS_PSI, 476 477 TOPO_SENSOR_UNITS_NEWTON, 478 TOPO_SENSOR_UNITS_CFM, 479 TOPO_SENSOR_UNITS_RPM, 480 TOPO_SENSOR_UNITS_HZ, 481 TOPO_SENSOR_UNITS_MICROSEC, 482 TOPO_SENSOR_UNITS_MILLISEC, 483 TOPO_SENSOR_UNITS_SECS, 484 TOPO_SENSOR_UNITS_MIN, 485 TOPO_SENSOR_UNITS_HOUR, 486 TOPO_SENSOR_UNITS_DAY, 487 TOPO_SENSOR_UNITS_WEEK, 488 TOPO_SENSOR_UNITS_MIL, 489 TOPO_SENSOR_UNITS_INCHES, 490 TOPO_SENSOR_UNITS_FEET, 491 TOPO_SENSOR_UNITS_CUB_INCH, 492 TOPO_SENSOR_UNITS_CUB_FEET, 493 494 TOPO_SENSOR_UNITS_MM, 495 TOPO_SENSOR_UNITS_CM, 496 TOPO_SENSOR_UNITS_METERS, 497 TOPO_SENSOR_UNITS_CUB_CM, 498 TOPO_SENSOR_UNITS_CUB_METER, 499 TOPO_SENSOR_UNITS_LITERS, 500 TOPO_SENSOR_UNITS_FLUID_OUNCE, 501 TOPO_SENSOR_UNITS_RADIANS, 502 TOPO_SENSOR_UNITS_STERADIANS, 503 TOPO_SENSOR_UNITS_REVOLUTIONS, 504 TOPO_SENSOR_UNITS_CYCLES, 505 TOPO_SENSOR_UNITS_GRAVITIES, 506 TOPO_SENSOR_UNITS_OUNCE, 507 TOPO_SENSOR_UNITS_POUND, 508 TOPO_SENSOR_UNITS_FOOT_POUND, 509 TOPO_SENSOR_UNITS_OZ_INCH, 510 511 TOPO_SENSOR_UNITS_GAUSS, 512 TOPO_SENSOR_UNITS_GILBERTS, 513 TOPO_SENSOR_UNITS_HENRY, 514 TOPO_SENSOR_UNITS_MILHENRY, 515 TOPO_SENSOR_UNITS_FARAD, 516 TOPO_SENSOR_UNITS_MICROFARAD, 517 TOPO_SENSOR_UNITS_OHMS, 518 TOPO_SENSOR_UNITS_SIEMENS, 519 TOPO_SENSOR_UNITS_MOLE, 520 TOPO_SENSOR_UNITS_BECQUEREL, 521 TOPO_SENSOR_UNITS_PPM, 522 TOPO_SENSOR_UNITS_RESERVED1, 523 TOPO_SENSOR_UNITS_DECIBELS, 524 TOPO_SENSOR_UNITS_DBA, 525 TOPO_SENSOR_UNITS_DBC, 526 TOPO_SENSOR_UNITS_GRAY, 527 528 TOPO_SENSOR_UNITS_SIEVERT, 529 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 530 TOPO_SENSOR_UNITS_BIT, 531 TOPO_SENSOR_UNITS_KILOBIT, 532 TOPO_SENSOR_UNITS_MEGABIT, 533 TOPO_SENSOR_UNITS_GIGABIT, 534 TOPO_SENSOR_UNITS_BYTE, 535 TOPO_SENSOR_UNITS_KILOBYTE, 536 TOPO_SENSOR_UNITS_MEGABYTE, 537 TOPO_SENSOR_UNITS_GIGABYTE, 538 TOPO_SENSOR_UNITS_WORD, 539 TOPO_SENSOR_UNITS_DWORD, 540 TOPO_SENSOR_UNITS_QWORD, 541 TOPO_SENSOR_UNITS_MEMLINE, 542 TOPO_SENSOR_UNITS_HIT, 543 TOPO_SENSOR_UNITS_MISS, 544 545 TOPO_SENSOR_UNITS_RETRY, 546 TOPO_SENSOR_UNITS_RESET, 547 TOPO_SENSOR_UNITS_OVERFLOW, 548 TOPO_SENSOR_UNITS_UNDERRUN, 549 TOPO_SENSOR_UNITS_COLLISION, 550 TOPO_SENSOR_UNITS_PACKETS, 551 TOPO_SENSOR_UNITS_MESSAGES, 552 TOPO_SENSOR_UNITS_CHARACTERS, 553 TOPO_SENSOR_UNITS_ERROR, 554 TOPO_SENSOR_UNITS_CE, 555 TOPO_SENSOR_UNITS_UE, 556 TOPO_SENSOR_UNITS_FATAL_ERROR, 557 TOPO_SENSOR_UNITS_GRAMS, 558 559 TOPO_SENSOR_UNITS_PERCENT = 512 560 } topo_sensor_unit_t; 561 562 /* 563 * These defines are used by the topo_method_sensor_failure to indicate 564 * whether the source of a sensor failure is believed to be the result of an 565 * internal failure, external condition or unknown 566 */ 567 #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 568 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 569 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 570 571 /* 572 * Sensor Types amd the associated sensor-type-specific states 573 * 574 * These are used to decode the type and state properties in the facility 575 * propgroup on facility nodes of type sensor. 576 * 577 * Again we're basically using the same defines as listed in the IPMI 578 * specification (see section 42) as it's serves as a good starting point and 579 * simplifies the IPMI provider code. Of course other facility providers will 580 * need to convert from their native codes to the topo code when they set the 581 * type and state properties. 582 */ 583 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 584 #define TOPO_SENSOR_TYPE_TEMP 0x0001 585 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 586 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 587 #define TOPO_SENSOR_TYPE_FAN 0x0004 588 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 589 590 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 591 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 592 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 593 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 594 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 595 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 596 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 597 598 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 599 600 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 601 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 602 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 603 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 604 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 605 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 606 607 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 608 609 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 610 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 611 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 612 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 613 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 614 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 615 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 616 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 617 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 618 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 619 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 620 621 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 622 623 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 624 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 625 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 626 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 627 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 628 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 629 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 630 631 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 632 633 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 634 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 635 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 636 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 637 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 638 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 639 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 640 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 641 642 #define TOPO_SENSOR_TYPE_COOLING 0x000A 643 #define TOPO_SENSOR_TYPE_OTHER 0x000B 644 645 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 646 647 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 648 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 649 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 650 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 651 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 652 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 653 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 654 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 655 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 656 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 657 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 658 659 #define TOPO_SENSOR_TYPE_BAY 0x000D 660 661 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 662 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 663 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 664 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 665 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 666 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 667 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 668 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 669 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 670 671 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 672 673 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 674 675 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 676 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 677 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 678 679 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 680 681 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 682 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 683 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 684 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 685 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 686 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 687 688 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 689 690 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 691 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 692 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 693 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 694 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 695 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 696 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 697 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 698 699 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 700 701 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 702 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 703 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 704 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 705 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 706 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 707 708 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 709 710 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 711 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 712 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 713 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 714 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 715 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 716 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 717 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 718 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 719 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 720 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 721 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 722 723 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 724 725 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 726 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 727 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 728 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 729 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 730 731 #define TOPO_SENSOR_TYPE_MODULE 0x0015 732 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 733 #define TOPO_SENSOR_TYPE_CARD 0x0017 734 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 735 736 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 737 738 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 739 740 #define TOPO_SENSOR_TYPE_FRU 0x001A 741 742 #define TOPO_SENSOR_TYPE_CABLE 0x001B 743 744 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 745 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 746 747 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 748 749 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 750 751 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 752 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 753 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 754 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 755 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 756 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 757 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 758 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 759 760 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 761 762 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 763 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 764 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 765 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 766 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 767 768 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 769 770 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 771 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 772 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 773 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 774 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 775 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 776 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 777 778 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 779 780 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 781 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 782 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 783 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 784 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 785 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 786 787 #define TOPO_SENSOR_TYPE_SLOT 0x0021 788 789 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 790 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 791 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 792 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 793 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 794 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 795 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 796 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 797 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 798 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 799 800 #define TOPO_SENSOR_TYPE_ACPI 0x0022 801 802 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 803 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 804 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 805 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 806 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 807 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 808 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 809 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 810 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 811 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 812 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 813 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 814 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 815 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 816 817 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 818 819 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 820 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 821 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 822 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 823 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 824 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 825 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 826 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 827 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 828 829 #define TOPO_SENSOR_TYPE_ALERT 0x0024 830 831 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 832 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 833 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 834 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 835 836 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 837 838 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 839 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 840 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 841 842 #define TOPO_SENSOR_TYPE_ASIC 0x0026 843 844 #define TOPO_SENSOR_TYPE_LAN 0x0027 845 846 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 847 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 848 849 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 850 851 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 852 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 853 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 854 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 855 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 856 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 857 858 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 859 860 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 861 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 862 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 863 864 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 865 866 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 867 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 868 869 #define TOPO_SENSOR_TYPE_VERSION 0x002B 870 871 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 872 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 873 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 874 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 875 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 876 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 877 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 878 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 879 880 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 881 882 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 883 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 884 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 885 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 886 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 887 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 888 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 889 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 890 891 /* 892 * We simplify the IPMI sensor type code defines by combining the generic 893 * and sensor-specific codes into a single range. Because there's overlap 894 * between the two ranges we offset the generic type codes by 0x0100 895 * which allows ample room in the hole for future expansion of the table to 896 * accomodate either additions to the IPMI spec or to support new sensor types 897 * for alternate provider modules. 898 */ 899 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 900 901 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 902 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 903 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 904 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 905 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 906 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 907 908 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 909 910 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 911 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 912 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 913 914 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 915 916 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 917 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 918 919 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 920 921 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 922 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 923 924 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 925 926 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 927 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 928 929 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 930 931 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 932 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 933 934 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 935 936 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 937 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 938 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 939 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 940 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 941 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 942 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 943 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 944 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 945 946 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 947 948 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 949 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 950 951 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 952 953 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 954 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 955 956 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 957 958 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 959 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 960 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 961 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 962 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 963 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 964 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 965 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 966 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 967 968 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 969 970 /* 971 * ACPI power state 972 */ 973 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 974 975 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 976 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 977 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 978 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 979 980 /* 981 * These sensor types don't exist in the IPMI spec, but allow consumers to 982 * associate discrete sensors with component failure. The 'ok' sensor is the 983 * inverse of the 'failure' sensor. Note that the values intentionally mimic 984 * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors 985 * but just change the type to get semantically meaningful behavior. 986 */ 987 #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D 988 989 #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 990 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 991 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 992 993 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E 994 995 #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 996 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 997 998 /* 999 * Indicator modes and types 1000 */ 1001 typedef enum topo_led_state { 1002 TOPO_LED_STATE_OFF = 0, 1003 TOPO_LED_STATE_ON 1004 } topo_led_state_t; 1005 1006 #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF 1007 1008 /* 1009 * This list is limited to the set of LED's that we're likely to manage through 1010 * FMA. Thus is does not include things like power or activity LED's 1011 */ 1012 typedef enum topo_led_type { 1013 TOPO_LED_TYPE_SERVICE = 0, 1014 TOPO_LED_TYPE_LOCATE, 1015 TOPO_LED_TYPE_OK2RM, 1016 TOPO_LED_TYPE_PRESENT 1017 } topo_led_type_t; 1018 1019 typedef enum topo_slot_type { 1020 TOPO_SLOT_TYPE_DIMM = 1, 1021 TOPO_SLOT_TYPE_UFM 1022 } topo_slot_type_t; 1023 1024 /* 1025 * Read permission indicates that we can read the raw firmware image in this 1026 * slot off of the device. 1027 * 1028 * Write permission indicates that we can write a firmware image into this 1029 * slot. 1030 * 1031 * These permission are orthogonal to the ability to simply report information 1032 * about the firmware image in a slot. 1033 */ 1034 typedef enum topo_ufm_slot_mode { 1035 TOPO_UFM_SLOT_MODE_NONE = 1, 1036 TOPO_UFM_SLOT_MODE_RO, 1037 TOPO_UFM_SLOT_MODE_WO, 1038 TOPO_UFM_SLOT_MODE_RW 1039 } topo_ufm_slot_mode_t; 1040 1041 typedef struct topo_ufm_slot_info { 1042 uint32_t usi_slotid; 1043 topo_ufm_slot_mode_t usi_mode; 1044 const char *usi_version; 1045 boolean_t usi_active; 1046 nvlist_t *usi_extra; 1047 } topo_ufm_slot_info_t; 1048 1049 #ifdef __cplusplus 1050 } 1051 #endif 1052 1053 #endif /* _LIBTOPO_H */ 1054