1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved. 24 */ 25 /* 26 * Copyright 2020 Joyent, Inc. 27 */ 28 29 #ifndef _LIBTOPO_H 30 #define _LIBTOPO_H 31 32 #include <sys/nvpair.h> 33 #include <stdio.h> 34 #include <libdevinfo.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 41 42 typedef struct topo_hdl topo_hdl_t; 43 typedef struct topo_node tnode_t; 44 typedef struct topo_walk topo_walk_t; 45 typedef uint64_t topo_instance_t; 46 typedef uint32_t topo_version_t; 47 48 typedef struct topo_list { 49 struct topo_list *l_prev; 50 struct topo_list *l_next; 51 } topo_list_t; 52 53 typedef struct topo_faclist { 54 topo_list_t tf_list; 55 tnode_t *tf_node; 56 } topo_faclist_t; 57 58 typedef struct topo_digraph topo_digraph_t; 59 typedef struct topo_vertex topo_vertex_t; 60 typedef struct topo_edge topo_edge_t; 61 62 typedef struct topo_path { 63 const char *tsp_fmristr; 64 nvlist_t *tsp_fmri; 65 topo_list_t tsp_components; 66 } topo_path_t; 67 68 typedef struct topo_path_component { 69 topo_list_t tspc_link; 70 topo_vertex_t *tspc_vertex; 71 } topo_path_component_t; 72 73 /* 74 * The following functions, error codes and data structures are private 75 * to libtopo snapshot consumers and enumerator modules. 76 */ 77 extern topo_hdl_t *topo_open(int, const char *, int *); 78 extern void topo_close(topo_hdl_t *); 79 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 80 extern void topo_snap_release(topo_hdl_t *); 81 82 /* 83 * Snapshot walker support 84 */ 85 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 86 87 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 88 void *, int *); 89 extern int topo_walk_step(topo_walk_t *, int); 90 extern void topo_walk_fini(topo_walk_t *); 91 extern di_node_t topo_hdl_devinfo(topo_hdl_t *); 92 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *); 93 94 /* 95 * Walk status returned from walker 96 */ 97 #define TOPO_WALK_ERR -1 98 #define TOPO_WALK_NEXT 0 99 #define TOPO_WALK_TERMINATE 1 100 101 /* 102 * Types of walks: depth-first (child) or breadth-first (sibling) 103 */ 104 #define TOPO_WALK_CHILD 0x0001 105 #define TOPO_WALK_SIBLING 0x0002 106 107 /* 108 * FMRI helper routines 109 */ 110 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 111 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 112 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 113 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 114 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 115 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 116 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 117 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 118 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 119 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 120 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 121 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 122 int *); 123 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 124 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 125 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 126 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 127 uint32_t, topo_walk_cb_t, void *, int *); 128 129 /* 130 * Consolidation private utility functions 131 */ 132 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 133 extern ulong_t topo_fmri_strhash_noauth(topo_hdl_t *, const char *); 134 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 135 extern boolean_t topo_fmri_strcmp_noauth(topo_hdl_t *, const char *, 136 const char *); 137 138 /* 139 * Topo node utilities: callable from topo_walk_step() callback or module 140 * enumeration, topo_mod_enumerate() 141 */ 142 extern char *topo_node_name(tnode_t *); 143 extern topo_instance_t topo_node_instance(tnode_t *); 144 extern tnode_t *topo_node_parent(tnode_t *); 145 extern void *topo_node_private(tnode_t *); 146 extern int topo_node_flags(tnode_t *); 147 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 148 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 149 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 150 extern int topo_node_label(tnode_t *, char **, int *); 151 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 152 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 153 nvlist_t *, nvlist_t **, int *); 154 extern boolean_t topo_method_supported(tnode_t *, const char *, 155 topo_version_t); 156 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 157 uint32_t, topo_faclist_t *, int *); 158 extern int topo_node_child_walk(topo_hdl_t *, tnode_t *, topo_walk_cb_t, 159 void *, int *); 160 extern int topo_node_occupied(tnode_t *, boolean_t *); 161 162 /* 163 * Node flags: denotes type of node 164 */ 165 #define TOPO_NODE_DEFAULT 0 166 #define TOPO_NODE_FACILITY 1 167 168 #define TOPO_FAC_TYPE_SENSOR "sensor" 169 #define TOPO_FAC_TYPE_INDICATOR "indicator" 170 171 /* 172 * Topo property get functions 173 */ 174 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 175 int32_t *, int *); 176 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 177 uint32_t *, int *); 178 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 179 int64_t *, int *); 180 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 181 uint64_t *, int *); 182 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 183 double *, int *); 184 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 185 char **, int *); 186 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 187 nvlist_t **, int *); 188 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 189 int32_t **, uint_t *, int *); 190 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 191 uint32_t **, uint_t *, int *); 192 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 193 int64_t **, uint_t *, int *); 194 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 195 uint64_t **, uint_t *, int *); 196 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 197 char ***, uint_t *, int *); 198 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 199 nvlist_t ***, uint_t *, int *); 200 201 /* 202 * Topo property set functions 203 */ 204 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 205 int32_t, int *); 206 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 207 uint32_t, int *); 208 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 209 int, int64_t, int *); 210 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 211 int, uint64_t, int *); 212 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 213 int, double, int *); 214 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 215 int, const char *, int *); 216 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 217 int, const nvlist_t *, int *); 218 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 219 int32_t *, uint_t, int *); 220 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 221 int, uint32_t *, uint_t, int *); 222 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 223 int, int64_t *, uint_t, int *); 224 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 225 int, uint64_t *, uint_t, int *); 226 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 227 int, const char **, uint_t, int *); 228 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 229 int, const nvlist_t **, uint_t, int *); 230 231 #define TOPO_PROP_IMMUTABLE 0 232 #define TOPO_PROP_MUTABLE 0x01 233 #define TOPO_PROP_NONVOLATILE 0x02 234 235 /* Protocol property group and property names */ 236 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 237 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 238 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 239 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 240 #define TOPO_PROP_MOD "module" /* software module FMRI */ 241 #define TOPO_PROP_PKG "package" /* software package FMRI */ 242 #define TOPO_PROP_LABEL "label" /* property LABEL */ 243 244 #define TOPO_METH_FAC_ENUM "fac_enum" 245 246 /* 247 * System property group 248 */ 249 #define TOPO_PGROUP_SYSTEM "system" 250 #define TOPO_PROP_ISA "isa" 251 #define TOPO_PROP_MACHINE "machine" 252 253 #define TOPO_PGROUP_IPMI "ipmi" 254 255 /* 256 * These enum definitions are used to define a set of error tags associated with 257 * libtopo error conditions occuring during the adminstration of 258 * properties, invocation of methods and fmri-based queries. The shell script 259 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 260 * source file. 261 * 262 * If you do something other than add a new error tag here, you may need to 263 * update the mkerror shell script as it is based upon simple regexps. 264 */ 265 typedef enum topo_prop_errno { 266 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 267 ETOPO_PROP_NOENT, /* undefined property or property group */ 268 ETOPO_PROP_DEFD, /* static property already defined */ 269 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 270 ETOPO_PROP_TYPE, /* invalid property type */ 271 ETOPO_PROP_NAME, /* invalid property name */ 272 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 273 ETOPO_PROP_NVL, /* malformed property nvlist */ 274 ETOPO_PROP_METHOD, /* get property method failed */ 275 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 276 } topo_prop_errno_t; 277 278 typedef enum topo_method_errno { 279 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 280 ETOPO_METHOD_INVAL, /* invalid method registration */ 281 ETOPO_METHOD_NOTSUP, /* method not supported */ 282 ETOPO_METHOD_FAIL, /* method failed */ 283 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 284 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 285 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 286 ETOPO_METHOD_DEFD, /* method op already defined */ 287 ETOPO_METHOD_END /* end of method errno list */ 288 } topo_method_errno_t; 289 290 typedef enum topo_fmri_errno { 291 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 292 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 293 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 294 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 295 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 296 ETOPO_FMRI_END /* end of fmri errno list */ 297 } topo_fmri_errno_t; 298 299 typedef enum topo_hdl_errno { 300 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 301 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 302 ETOPO_HDL_SNAP, /* snapshot already taken */ 303 ETOPO_HDL_INVAL, /* invalid argument specified */ 304 ETOPO_HDL_UUID, /* uuid already set */ 305 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 306 ETOPO_HDL_END /* end of handle errno list */ 307 } topo_hdl_errno_t; 308 309 extern const char *topo_strerror(int); 310 extern void topo_hdl_strfree(topo_hdl_t *, char *); 311 extern void topo_hdl_strfreev(topo_hdl_t *, char **, uint_t); 312 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 313 314 /* 315 * The following functions and data structures to support property 316 * observability are private to the fmtopo command. 317 */ 318 319 /* 320 * Each topology node advertises the name and data stability of each of its 321 * modules and properties. (see attributes(7)). 322 */ 323 324 /* 325 * Topo stability attributes 326 */ 327 typedef enum topo_stability { 328 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 329 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 330 TOPO_STABILITY_PRIVATE, /* private to Sun */ 331 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 332 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 333 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 334 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 335 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 336 TOPO_STABILITY_STANDARD /* industry standard */ 337 } topo_stability_t; 338 339 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 340 341 typedef struct topo_pgroup_info { 342 const char *tpi_name; /* property group name */ 343 topo_stability_t tpi_namestab; /* stability of group name */ 344 topo_stability_t tpi_datastab; /* stability of all property values */ 345 topo_version_t tpi_version; /* version of pgroup definition */ 346 } topo_pgroup_info_t; 347 348 extern topo_stability_t topo_name2stability(const char *); 349 extern const char *topo_stability2name(topo_stability_t); 350 extern void topo_pgroup_destroy(tnode_t *, const char *); 351 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 352 353 typedef enum { 354 TOPO_TYPE_INVALID = 0, 355 TOPO_TYPE_BOOLEAN, /* boolean */ 356 TOPO_TYPE_INT32, /* int32_t */ 357 TOPO_TYPE_UINT32, /* uint32_t */ 358 TOPO_TYPE_INT64, /* int64_t */ 359 TOPO_TYPE_UINT64, /* uint64_t */ 360 TOPO_TYPE_STRING, /* const char* */ 361 TOPO_TYPE_TIME, /* uint64_t */ 362 TOPO_TYPE_SIZE, /* uint64_t */ 363 TOPO_TYPE_FMRI, /* nvlist_t */ 364 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 365 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 366 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 367 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 368 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 369 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 370 TOPO_TYPE_DOUBLE /* double */ 371 } topo_type_t; 372 373 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 374 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 375 nvlist_t *, nvlist_t **, int *); 376 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 377 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 378 int, nvlist_t *, int *); 379 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 380 const char *, nvlist_t *, nvlist_t **, int *); 381 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 382 nvlist_t **, int *); 383 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 384 nvlist_t *, int, nvlist_t *, int *); 385 extern void topo_pgroup_hcset(tnode_t *, nvlist_t *); 386 387 /* Property node NVL names used in topo_prop_getprops */ 388 #define TOPO_PROP_GROUP "property-group" 389 #define TOPO_PROP_GROUP_NAME "property-group-name" 390 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 391 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 392 #define TOPO_PROP_GROUP_VERSION "property-group-version" 393 #define TOPO_PROP_VAL "property" 394 #define TOPO_PROP_VAL_NAME "property-name" 395 #define TOPO_PROP_VAL_VAL "property-value" 396 #define TOPO_PROP_VAL_TYPE "property-type" 397 #define TOPO_PROP_FLAG "property-flag" 398 399 /* 400 * ARGS list used in topo property methods 401 */ 402 #define TOPO_PROP_ARGS "args" 403 #define TOPO_PROP_PARGS "private-args" 404 405 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 406 407 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 408 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 409 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 410 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 411 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 412 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 413 414 /* 415 * Interfaces for interacting with directed graph topologies 416 */ 417 extern topo_digraph_t *topo_digraph_get(topo_hdl_t *, const char *); 418 extern int topo_vertex_iter(topo_hdl_t *, topo_digraph_t *, 419 int (*)(topo_hdl_t *, topo_vertex_t *, boolean_t, void *), void *); 420 extern tnode_t *topo_vertex_node(topo_vertex_t *); 421 extern int topo_edge_iter(topo_hdl_t *, topo_vertex_t *, 422 int (*)(topo_hdl_t *, topo_edge_t *, boolean_t, void *), void *); 423 extern int topo_digraph_paths(topo_hdl_t *, topo_digraph_t *, 424 topo_vertex_t *, topo_vertex_t *, topo_path_t ***, uint_t *); 425 extern void topo_path_destroy(topo_hdl_t *, topo_path_t *); 426 extern int topo_digraph_serialize(topo_hdl_t *, topo_digraph_t *, FILE *); 427 extern topo_digraph_t *topo_digraph_deserialize(topo_hdl_t *, const char *, 428 size_t); 429 extern topo_vertex_t *topo_node_vertex(tnode_t *); 430 431 /* 432 * Interfaces for converting sensor/indicator types, units, states, etc to 433 * a string 434 */ 435 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 436 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 437 void topo_led_type_name(uint8_t type, char *buf, size_t len); 438 void topo_led_state_name(uint8_t type, char *buf, size_t len); 439 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 440 size_t len); 441 442 /* 443 * Defines for standard properties for sensors and indicators 444 */ 445 #define TOPO_PGROUP_FACILITY "facility" 446 447 #define TOPO_SENSOR_READING "reading" 448 #define TOPO_SENSOR_STATE "state" 449 #define TOPO_SENSOR_CLASS "sensor-class" 450 #define TOPO_FACILITY_TYPE "type" 451 #define TOPO_SENSOR_UNITS "units" 452 #define TOPO_LED_MODE "mode" 453 454 #define TOPO_PROP_THRESHOLD_LNC "threshold-lower-non-critical" 455 #define TOPO_PROP_THRESHOLD_LCR "threshold-lower-critical" 456 #define TOPO_PROP_THRESHOLD_LNR "threshold-lower-non-recoverable" 457 458 #define TOPO_PROP_THRESHOLD_UNC "threshold-upper-non-critical" 459 #define TOPO_PROP_THRESHOLD_UCR "threshold-upper-critical" 460 #define TOPO_PROP_THRESHOLD_UNR "threshold-upper-non-recoverable" 461 462 /* 463 * Sensor Classes 464 * 465 * The "sensor-class" property in the "facility" propgroup on 466 * facility nodes of type "sensor" should be set to one of these 467 * two values. 468 * 469 * Threshold sensors provide an analog sensor reading via the 470 * "reading" property in the facility propgroup. They will also 471 * provide one or more discrete states via the "state" property 472 * in the facility propgroup. 473 * 474 * Discrete sensors will not provide an analog reading by will 475 * provide one or more discrete states via the "state" property 476 * in the facility propgroup. 477 */ 478 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 479 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 480 481 /* 482 * Sensor unit types. We're using the unit types and corresponding 483 * codes described in section 43.17 of the IPMI 2.0 as a reference as it seems 484 * to be a reasonably comprehensive list. This also simplifies the IPMI 485 * facility provider code since the unit type codes will map exactly to what 486 * libtopo uses (so no conversion necessary). To allow for future growth if 487 * new unit types are added to IPMI in the future, while still allowing unit 488 * types not supported by IPMI to be represented, we include a gap between 489 * the last IPMI unit type and the first non-IPMI unit type. 490 */ 491 typedef enum topo_sensor_unit { 492 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 493 TOPO_SENSOR_UNITS_DEGREES_C, 494 TOPO_SENSOR_UNITS_DEGREES_F, 495 TOPO_SENSOR_UNITS_DEGREES_K, 496 TOPO_SENSOR_UNITS_VOLTS, 497 TOPO_SENSOR_UNITS_AMPS, 498 TOPO_SENSOR_UNITS_WATTS, 499 TOPO_SENSOR_UNITS_JOULES, 500 TOPO_SENSOR_UNITS_COULOMBS, 501 TOPO_SENSOR_UNITS_VA, 502 TOPO_SENSOR_UNITS_NITS, 503 TOPO_SENSOR_UNITS_LUMEN, 504 TOPO_SENSOR_UNITS_LUX, 505 TOPO_SENSOR_UNITS_CANDELA, 506 TOPO_SENSOR_UNITS_KPA, 507 TOPO_SENSOR_UNITS_PSI, 508 509 TOPO_SENSOR_UNITS_NEWTON, 510 TOPO_SENSOR_UNITS_CFM, 511 TOPO_SENSOR_UNITS_RPM, 512 TOPO_SENSOR_UNITS_HZ, 513 TOPO_SENSOR_UNITS_MICROSEC, 514 TOPO_SENSOR_UNITS_MILLISEC, 515 TOPO_SENSOR_UNITS_SECS, 516 TOPO_SENSOR_UNITS_MIN, 517 TOPO_SENSOR_UNITS_HOUR, 518 TOPO_SENSOR_UNITS_DAY, 519 TOPO_SENSOR_UNITS_WEEK, 520 TOPO_SENSOR_UNITS_MIL, 521 TOPO_SENSOR_UNITS_INCHES, 522 TOPO_SENSOR_UNITS_FEET, 523 TOPO_SENSOR_UNITS_CUB_INCH, 524 TOPO_SENSOR_UNITS_CUB_FEET, 525 526 TOPO_SENSOR_UNITS_MM, 527 TOPO_SENSOR_UNITS_CM, 528 TOPO_SENSOR_UNITS_METERS, 529 TOPO_SENSOR_UNITS_CUB_CM, 530 TOPO_SENSOR_UNITS_CUB_METER, 531 TOPO_SENSOR_UNITS_LITERS, 532 TOPO_SENSOR_UNITS_FLUID_OUNCE, 533 TOPO_SENSOR_UNITS_RADIANS, 534 TOPO_SENSOR_UNITS_STERADIANS, 535 TOPO_SENSOR_UNITS_REVOLUTIONS, 536 TOPO_SENSOR_UNITS_CYCLES, 537 TOPO_SENSOR_UNITS_GRAVITIES, 538 TOPO_SENSOR_UNITS_OUNCE, 539 TOPO_SENSOR_UNITS_POUND, 540 TOPO_SENSOR_UNITS_FOOT_POUND, 541 TOPO_SENSOR_UNITS_OZ_INCH, 542 543 TOPO_SENSOR_UNITS_GAUSS, 544 TOPO_SENSOR_UNITS_GILBERTS, 545 TOPO_SENSOR_UNITS_HENRY, 546 TOPO_SENSOR_UNITS_MILHENRY, 547 TOPO_SENSOR_UNITS_FARAD, 548 TOPO_SENSOR_UNITS_MICROFARAD, 549 TOPO_SENSOR_UNITS_OHMS, 550 TOPO_SENSOR_UNITS_SIEMENS, 551 TOPO_SENSOR_UNITS_MOLE, 552 TOPO_SENSOR_UNITS_BECQUEREL, 553 TOPO_SENSOR_UNITS_PPM, 554 TOPO_SENSOR_UNITS_RESERVED1, 555 TOPO_SENSOR_UNITS_DECIBELS, 556 TOPO_SENSOR_UNITS_DBA, 557 TOPO_SENSOR_UNITS_DBC, 558 TOPO_SENSOR_UNITS_GRAY, 559 560 TOPO_SENSOR_UNITS_SIEVERT, 561 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 562 TOPO_SENSOR_UNITS_BIT, 563 TOPO_SENSOR_UNITS_KILOBIT, 564 TOPO_SENSOR_UNITS_MEGABIT, 565 TOPO_SENSOR_UNITS_GIGABIT, 566 TOPO_SENSOR_UNITS_BYTE, 567 TOPO_SENSOR_UNITS_KILOBYTE, 568 TOPO_SENSOR_UNITS_MEGABYTE, 569 TOPO_SENSOR_UNITS_GIGABYTE, 570 TOPO_SENSOR_UNITS_WORD, 571 TOPO_SENSOR_UNITS_DWORD, 572 TOPO_SENSOR_UNITS_QWORD, 573 TOPO_SENSOR_UNITS_MEMLINE, 574 TOPO_SENSOR_UNITS_HIT, 575 TOPO_SENSOR_UNITS_MISS, 576 577 TOPO_SENSOR_UNITS_RETRY, 578 TOPO_SENSOR_UNITS_RESET, 579 TOPO_SENSOR_UNITS_OVERFLOW, 580 TOPO_SENSOR_UNITS_UNDERRUN, 581 TOPO_SENSOR_UNITS_COLLISION, 582 TOPO_SENSOR_UNITS_PACKETS, 583 TOPO_SENSOR_UNITS_MESSAGES, 584 TOPO_SENSOR_UNITS_CHARACTERS, 585 TOPO_SENSOR_UNITS_ERROR, 586 TOPO_SENSOR_UNITS_CE, 587 TOPO_SENSOR_UNITS_UE, 588 TOPO_SENSOR_UNITS_FATAL_ERROR, 589 TOPO_SENSOR_UNITS_GRAMS, 590 591 TOPO_SENSOR_UNITS_PERCENT = 512 592 } topo_sensor_unit_t; 593 594 /* 595 * These defines are used by the topo_method_sensor_failure to indicate 596 * whether the source of a sensor failure is believed to be the result of an 597 * internal failure, external condition or unknown 598 */ 599 #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 600 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 601 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 602 603 /* 604 * Sensor Types amd the associated sensor-type-specific states 605 * 606 * These are used to decode the type and state properties in the facility 607 * propgroup on facility nodes of type sensor. 608 * 609 * Again we're basically using the same defines as listed in the IPMI 610 * specification (see section 42) as it's serves as a good starting point and 611 * simplifies the IPMI provider code. Of course other facility providers will 612 * need to convert from their native codes to the topo code when they set the 613 * type and state properties. 614 */ 615 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 616 #define TOPO_SENSOR_TYPE_TEMP 0x0001 617 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 618 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 619 #define TOPO_SENSOR_TYPE_FAN 0x0004 620 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 621 622 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 623 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 624 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 625 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 626 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 627 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 628 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 629 630 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 631 632 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 633 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 634 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 635 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 636 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 637 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 638 639 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 640 641 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 642 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 643 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 644 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 645 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 646 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 647 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 648 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 649 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 650 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 651 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 652 653 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 654 655 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 656 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 657 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 658 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 659 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 660 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 661 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 662 663 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 664 665 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 666 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 667 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 668 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 669 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 670 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 671 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 672 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 673 674 #define TOPO_SENSOR_TYPE_COOLING 0x000A 675 #define TOPO_SENSOR_TYPE_OTHER 0x000B 676 677 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 678 679 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 680 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 681 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 682 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 683 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 684 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 685 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 686 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 687 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 688 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 689 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 690 691 #define TOPO_SENSOR_TYPE_BAY 0x000D 692 693 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 694 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 695 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 696 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 697 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 698 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 699 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 700 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 701 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 702 703 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 704 705 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 706 707 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 708 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 709 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 710 711 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 712 713 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 714 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 715 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 716 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 717 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 718 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 719 720 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 721 722 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 723 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 724 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 725 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 726 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 727 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 728 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 729 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 730 731 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 732 733 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 734 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 735 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 736 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 737 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 738 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 739 740 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 741 742 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 743 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 744 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 745 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 746 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 747 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 748 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 749 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 750 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 751 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 752 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 753 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 754 755 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 756 757 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 758 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 759 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 760 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 761 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 762 763 #define TOPO_SENSOR_TYPE_MODULE 0x0015 764 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 765 #define TOPO_SENSOR_TYPE_CARD 0x0017 766 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 767 768 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 769 770 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 771 772 #define TOPO_SENSOR_TYPE_FRU 0x001A 773 774 #define TOPO_SENSOR_TYPE_CABLE 0x001B 775 776 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 777 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 778 779 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 780 781 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 782 783 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 784 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 785 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 786 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 787 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 788 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 789 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 790 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 791 792 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 793 794 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 795 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 796 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 797 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 798 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 799 800 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 801 802 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 803 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 804 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 805 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 806 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 807 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 808 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 809 810 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 811 812 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 813 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 814 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 815 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 816 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 817 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 818 819 #define TOPO_SENSOR_TYPE_SLOT 0x0021 820 821 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 822 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 823 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 824 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 825 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 826 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 827 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 828 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 829 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 830 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 831 832 #define TOPO_SENSOR_TYPE_ACPI 0x0022 833 834 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 835 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 836 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 837 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 838 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 839 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 840 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 841 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 842 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 843 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 844 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 845 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 846 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 847 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 848 849 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 850 851 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 852 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 853 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 854 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 855 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 856 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 857 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 858 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 859 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 860 861 #define TOPO_SENSOR_TYPE_ALERT 0x0024 862 863 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 864 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 865 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 866 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 867 868 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 869 870 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 871 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 872 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 873 874 #define TOPO_SENSOR_TYPE_ASIC 0x0026 875 876 #define TOPO_SENSOR_TYPE_LAN 0x0027 877 878 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 879 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 880 881 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 882 883 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 884 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 885 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 886 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 887 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 888 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 889 890 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 891 892 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 893 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 894 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 895 896 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 897 898 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 899 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 900 901 #define TOPO_SENSOR_TYPE_VERSION 0x002B 902 903 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 904 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 905 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 906 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 907 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 908 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 909 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 910 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 911 912 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 913 914 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 915 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 916 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 917 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 918 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 919 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 920 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 921 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 922 923 /* 924 * We simplify the IPMI sensor type code defines by combining the generic 925 * and sensor-specific codes into a single range. Because there's overlap 926 * between the two ranges we offset the generic type codes by 0x0100 927 * which allows ample room in the hole for future expansion of the table to 928 * accomodate either additions to the IPMI spec or to support new sensor types 929 * for alternate provider modules. 930 */ 931 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 932 933 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 934 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 935 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 936 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 937 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 938 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 939 940 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 941 942 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 943 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 944 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 945 946 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 947 948 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 949 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 950 951 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 952 953 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 954 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 955 956 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 957 958 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 959 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 960 961 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 962 963 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 964 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 965 966 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 967 968 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 969 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 970 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 971 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 972 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 973 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 974 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 975 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 976 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 977 978 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 979 980 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 981 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 982 983 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 984 985 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 986 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 987 988 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 989 990 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 991 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 992 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 993 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 994 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 995 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 996 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 997 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 998 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 999 1000 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 1001 1002 /* 1003 * ACPI power state 1004 */ 1005 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 1006 1007 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 1008 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 1009 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 1010 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 1011 1012 /* 1013 * These sensor types don't exist in the IPMI spec, but allow consumers to 1014 * associate discrete sensors with component failure. The 'ok' sensor is the 1015 * inverse of the 'failure' sensor. Note that the values intentionally mimic 1016 * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors 1017 * but just change the type to get semantically meaningful behavior. 1018 */ 1019 #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D 1020 1021 #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 1022 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 1023 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 1024 1025 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E 1026 1027 #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 1028 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 1029 1030 /* 1031 * Indicator modes and types 1032 */ 1033 typedef enum topo_led_state { 1034 TOPO_LED_STATE_OFF = 0, 1035 TOPO_LED_STATE_ON 1036 } topo_led_state_t; 1037 1038 #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF 1039 1040 /* 1041 * This list is limited to the set of LED's that we're likely to manage through 1042 * FMA. Thus is does not include things like power or activity LED's 1043 */ 1044 typedef enum topo_led_type { 1045 TOPO_LED_TYPE_SERVICE = 0, 1046 TOPO_LED_TYPE_LOCATE, 1047 TOPO_LED_TYPE_OK2RM, 1048 TOPO_LED_TYPE_PRESENT 1049 } topo_led_type_t; 1050 1051 typedef enum topo_slot_type { 1052 TOPO_SLOT_TYPE_DIMM = 1, 1053 TOPO_SLOT_TYPE_UFM, 1054 TOPO_SLOT_TYPE_M2 1055 } topo_slot_type_t; 1056 1057 /* 1058 * Read permission indicates that we can read the raw firmware image in this 1059 * slot off of the device. 1060 * 1061 * Write permission indicates that we can write a firmware image into this 1062 * slot. 1063 * 1064 * These permission are orthogonal to the ability to simply report information 1065 * about the firmware image in a slot. 1066 */ 1067 typedef enum topo_ufm_slot_mode { 1068 TOPO_UFM_SLOT_MODE_NONE = 1, 1069 TOPO_UFM_SLOT_MODE_RO, 1070 TOPO_UFM_SLOT_MODE_WO, 1071 TOPO_UFM_SLOT_MODE_RW 1072 } topo_ufm_slot_mode_t; 1073 1074 typedef struct topo_ufm_slot_info { 1075 uint32_t usi_slotid; 1076 topo_ufm_slot_mode_t usi_mode; 1077 const char *usi_version; 1078 boolean_t usi_active; 1079 nvlist_t *usi_extra; 1080 } topo_ufm_slot_info_t; 1081 1082 #ifdef __cplusplus 1083 } 1084 #endif 1085 1086 #endif /* _LIBTOPO_H */ 1087