1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25# ident "%Z%%M% %I% %E% SMI" 26# 27 28include ../Makefile.master 29 30# Note that libcurses installs commands along with its library. 31# This is a minor bug which probably should be fixed. 32# Note also that a few extra libraries are kept in cmd source. 33# 34# Certain libraries are linked with, hence depend on, other libraries. 35# 36# Although we have historically used .WAIT to express dependencies, it 37# reduces the amount of parallelism and thus lengthens the time it 38# takes to build the libraries. Thus, we now require that any new 39# libraries explicitly call out their dependencies. Eventually, all 40# the library dependencies will be called out explicitly. See 41# "Library interdependencies" near the end of this file. 42# 43# Aside from explicit dependencies (and legacy .WAITs), all libraries 44# are built in parallel. 45# 46.PARALLEL: 47 48# 49# The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, 50# but required due to the "dependencies" of using .WAIT to barrier the 51# parallel dmake builds. once 4631488 has been fixed, they can be 52# consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as 53# shown in HDRSUBDIRS 54# 55SUBDIRS= \ 56 common .WAIT \ 57 ../cmd/sgs/libconv \ 58 ../cmd/sgs/libdl .WAIT 59 60$(CLOSED_BUILD)SUBDIRS += \ 61 $(CLOSED)/lib/libc_i18n 62 63SUBDIRS += \ 64 libc .WAIT \ 65 ../cmd/sgs/libelf .WAIT \ 66 libmd \ 67 libmd5 \ 68 librsm \ 69 libmp .WAIT \ 70 libnsl \ 71 libsecdb .WAIT \ 72 librpcsvc \ 73 libsocket .WAIT \ 74 libsctp \ 75 libsip \ 76 libresolv \ 77 libresolv2 .WAIT \ 78 libw .WAIT \ 79 libintl .WAIT \ 80 ../cmd/sgs/librtld_db \ 81 libaio \ 82 librt \ 83 libadm \ 84 libctf \ 85 libdtrace \ 86 libdtrace_jni \ 87 libcurses \ 88 libgen \ 89 libgss \ 90 libpam \ 91 libuuid \ 92 libthread \ 93 libpthread .WAIT \ 94 libslp \ 95 libbsdmalloc \ 96 libcmd \ 97 libdoor \ 98 libdevinfo \ 99 libdladm \ 100 libdlpi \ 101 libeti \ 102 libcrypt \ 103 libefi \ 104 libfstyp \ 105 libwanboot \ 106 libwanbootutil \ 107 libcryptoutil \ 108 libinetcfg \ 109 libinetutil \ 110 libipmp \ 111 libiscsitgt \ 112 libkmf \ 113 libkstat \ 114 libkvm \ 115 liblaadm \ 116 liblm \ 117 libmacadm \ 118 libmalloc \ 119 libmapmalloc \ 120 libmtmalloc \ 121 libnls \ 122 libsmbios \ 123 libtecla \ 124 libumem \ 125 libnvpair .WAIT \ 126 libexacct \ 127 libplot \ 128 libldap4 \ 129 libsasl \ 130 libldap5 \ 131 libsldap .WAIT \ 132 libbsm \ 133 libsys \ 134 libsysevent \ 135 libnisdb \ 136 libpool \ 137 libproc \ 138 libproject \ 139 libsendfile \ 140 nametoaddr \ 141 ncad_addr \ 142 gss_mechs/mech_krb5 .WAIT \ 143 libkrb5 .WAIT \ 144 krb5 .WAIT 145$(CLOSED_BUILD)SUBDIRS += \ 146 $(CLOSED)/lib/smartcard 147SUBDIRS += \ 148 passwdutil \ 149 pam_modules \ 150 crypt_modules \ 151 libadt_jni \ 152 abi \ 153 auditd_plugins \ 154 libvolmgt \ 155 libdevice \ 156 libdevid \ 157 libdhcpsvc \ 158 libc_db \ 159 libsec \ 160 libtnfprobe \ 161 libtnf \ 162 libtnfctl \ 163 libdhcpagent \ 164 libdhcpdu \ 165 libdhcputil \ 166 libipsecutil 167$(CLOSED_BUILD)SUBDIRS += \ 168 $(CLOSED)/lib/libike 169SUBDIRS += \ 170 nsswitch \ 171 print \ 172 libuutil \ 173 libscf \ 174 libinetsvc \ 175 librestart \ 176 libsched 177$(CLOSED_BUILD)SUBDIRS += \ 178 $(CLOSED)/lib/libelfsign 179SUBDIRS += \ 180 pkcs11 .WAIT \ 181 libpctx .WAIT \ 182 libcpc \ 183 watchmalloc \ 184 extendedFILE \ 185 madv \ 186 mpss \ 187 libdisasm \ 188 libwladm \ 189 libwrap \ 190 libxcurses \ 191 libxcurses2 \ 192 libxnet \ 193 libbrand .WAIT \ 194 libzonecfg \ 195 libzoneinfo \ 196 libtsnet \ 197 libtsol \ 198 gss_mechs/mech_spnego \ 199 gss_mechs/mech_dummy \ 200 gss_mechs/mech_dh \ 201 rpcsec_gss \ 202 libraidcfg .WAIT \ 203 librcm .WAIT \ 204 libcfgadm .WAIT \ 205 libpicl .WAIT \ 206 libpicltree .WAIT \ 207 raidcfg_plugins \ 208 cfgadm_plugins \ 209 libmail \ 210 lvm \ 211 libsmedia \ 212 libipp \ 213 openssl \ 214 libdiskmgt \ 215 liblgrp \ 216 libfsmgt \ 217 fm \ 218 libavl \ 219 libcmdutils \ 220 libcontract \ 221 ../cmd/sendmail/libmilter \ 222 sasl_plugins \ 223 udapl \ 224 libzpool \ 225 libzfs \ 226 libzfs_jni \ 227 libmapid \ 228 brand \ 229 policykit \ 230 hal \ 231 libshare \ 232 $($(MACH)_SUBDIRS) 233 234sparc_SUBDIRS= .WAIT \ 235 efcode \ 236 libc_psr .WAIT \ 237 libdscp \ 238 libprtdiag .WAIT \ 239 libprtdiag_psr \ 240 librsc \ 241 libfruutils .WAIT \ 242 libfru \ 243 libwrsmconf \ 244 storage \ 245 wrsm \ 246 libpcp 247 248fm: libexacct 249 250# 251# Create a special version of $(SUBDIRS) with no .WAIT's, for use with the 252# clean and clobber targets (for more information, see those targets, below). 253# 254NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) 255 256DCSUBDIRS = \ 257 lvm 258 259MSGSUBDIRS= \ 260 abi \ 261 auditd_plugins \ 262 brand \ 263 cfgadm_plugins \ 264 gss_mechs/mech_dh \ 265 gss_mechs/mech_krb5 \ 266 krb5 \ 267 libbsm \ 268 libc \ 269 libcfgadm \ 270 libcontract \ 271 libcurses \ 272 libdhcpsvc \ 273 libdhcputil \ 274 libdladm \ 275 libgss \ 276 libinetcfg \ 277 libipmp \ 278 libnsl \ 279 libpam \ 280 libpicl \ 281 libpool \ 282 libscf \ 283 libsasl \ 284 libldap5 \ 285 libsecdb \ 286 libshare \ 287 libsldap \ 288 libslp \ 289 libsmedia \ 290 libtsol \ 291 libuutil \ 292 libwanboot \ 293 libwanbootutil \ 294 libwladm \ 295 libzonecfg \ 296 lvm \ 297 madv \ 298 mpss \ 299 pam_modules \ 300 rpcsec_gss 301$(CLOSED_BUILD)MSGSUBDIRS += \ 302 $(CLOSED)/lib/smartcard 303MSGSUBDIRS += \ 304 $($(MACH)_MSGSUBDIRS) 305 306sparc_MSGSUBDIRS= \ 307 libprtdiag \ 308 libprtdiag_psr 309 310HDRSUBDIRS= \ 311 auditd_plugins \ 312 libbrand \ 313 libbsm \ 314 libc \ 315 libcmdutils \ 316 libcontract \ 317 libcpc \ 318 libctf \ 319 libcurses \ 320 libcryptoutil \ 321 libdevice \ 322 libdevid \ 323 libdevinfo \ 324 libdiskmgt \ 325 libdladm \ 326 libdlpi \ 327 libdhcpagent \ 328 libdhcpsvc \ 329 libdhcputil \ 330 libdisasm \ 331 libdtrace \ 332 libdtrace_jni \ 333 libeti \ 334 libfstyp \ 335 libgen \ 336 libwanboot \ 337 libwanbootutil \ 338 libipsecutil \ 339 libinetcfg \ 340 libinetsvc \ 341 libinetutil \ 342 libipmp \ 343 libipp \ 344 libiscsitgt \ 345 libkstat \ 346 libkvm \ 347 liblaadm \ 348 libmacadm \ 349 libmail \ 350 libmd \ 351 libmtmalloc \ 352 libnvpair \ 353 libnsl \ 354 libpam \ 355 libpctx \ 356 libpicl \ 357 libpicltree \ 358 libplot \ 359 libpool \ 360 libproc \ 361 librcm \ 362 libscf \ 363 libsip \ 364 libsmbios \ 365 librestart \ 366 librpcsvc \ 367 librsm \ 368 libsasl \ 369 libsec \ 370 libslp \ 371 libsmedia \ 372 libsysevent \ 373 libtecla \ 374 libtnf \ 375 libtnfctl \ 376 libtnfprobe \ 377 libtsnet \ 378 libtsol \ 379 libvolmgt \ 380 libumem \ 381 libuutil \ 382 libwladm \ 383 libwrap \ 384 libxcurses2 \ 385 libzfs \ 386 libzfs_jni \ 387 libzoneinfo \ 388 hal \ 389 policykit \ 390 lvm \ 391 openssl \ 392 pkcs11 \ 393 passwdutil \ 394 ../cmd/sendmail/libmilter \ 395 fm \ 396 udapl \ 397 libmapid \ 398 libkrb5 \ 399 libshare \ 400 $($(MACH)_HDRSUBDIRS) 401 402$(CLOSED_BUILD)HDRSUBDIRS += \ 403 $(CLOSED)/lib/libc_i18n \ 404 $(CLOSED)/lib/libike \ 405 $(CLOSED)/lib/smartcard 406 407sparc_HDRSUBDIRS= \ 408 libdscp \ 409 libwrsmconf 410 411all := TARGET= all 412check := TARGET= check 413clean := TARGET= clean 414clobber := TARGET= clobber 415install := TARGET= install 416install_h := TARGET= install_h 417lint := TARGET= lint 418_dc := TARGET= _dc 419_msg := TARGET= _msg 420 421.KEEP_STATE: 422 423# 424# For the all and install targets, we clearly must respect library 425# dependencies so that the libraries link correctly. However, for 426# the remaining targets (check, clean, clobber, install_h, lint, _dc 427# and _msg), libraries do not have any dependencies on one another 428# and thus respecting dependencies just slows down the build. 429# As such, for these rules, we use pattern replacement to explicitly 430# avoid triggering the dependency information. Note that for clean, 431# clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than 432# $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. 433# 434 435all: $(SUBDIRS) 436 437install: $(SUBDIRS) .WAIT install_extra 438 439# extra libraries kept in other source areas 440install_extra: 441 @cd ../cmd/sgs; pwd; $(MAKE) install_lib 442 @pwd 443 444clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) 445 446install_h check: $(HDRSUBDIRS:%=%-nodepend) 447 448_msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc 449 450_dc: $(DCSUBDIRS:%=%-nodepend) 451 452# dependencies for pam_modules (see below) 453$(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard 454 455# 456# Library interdependencies are called out explicitly here 457# 458auditd_plugins: libbsm libnsl libsecdb 459gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 460libadt_jni: libbsm 461$(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n 462libbsm: libtsol 463libcmdutils: libavl 464libcontract: libnvpair 465libdevid: libdevinfo 466libdevinfo: libnvpair libsec 467libdhcpagent: libsocket libdhcputil libuuid libdlpi 468libdhcpsvc: libinetutil 469libdhcputil: libnsl libgen libinetutil libdlpi 470libdladm: libdlpi libdevinfo libwladm libinetutil 471libdtrace: libproc libgen libctf 472libdtrace_jni: libuutil libdtrace 473libefi: libuuid 474libfstyp: libnvpair 475$(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \ 476 $(CLOSED)/lib/libike libcryptoutil pkcs11 477libinetcfg: libnsl libsocket libdevinfo 478libkmf: libcryptoutil pkcs11 openssl 479libnsl: libmd5 libscf 480libmapid: libresolv 481libmacadm: libdevinfo 482libuuid: libsocket 483libinetutil: libsocket 484libsecdb: libnsl 485libsasl: libgss libsocket pkcs11 libmd 486sasl_plugins: pkcs11 libgss libsocket libsasl 487libsctp: libsocket 488libsip: libmd5 489libsocket: libnsl 490libldap5: libsasl libsocket libnsl libmd 491libsldap: libldap5 libtsol 492libpool: libnvpair libexacct 493libzonecfg: libc libsocket libnsl libuuid libnvpair libsysevent libsec \ 494 libbrand libpool libscf 495libproc: ../cmd/sgs/librtld_db ../cmd/sgs/libelf libctf 496libproject: libpool libproc libsecdb 497libtsnet: libnsl libtsol libsecdb 498libwrap: libnsl libsocket 499libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ 500 libdhcputil openssl 501libwanbootutil: libnsl 502libwladm: libdevinfo libsocket 503pam_modules: libproject passwdutil $(SMARTCARD) 504libscf: libuutil libmd 505libinetsvc: libscf 506librestart: libuutil libscf 507../cmd/sgs/libdl: ../cmd/sgs/libconv 508../cmd/sgs/libelf: ../cmd/sgs/libconv 509pkcs11: libcryptoutil 510print: libldap5 511udapl/udapl_tavor: udapl/libdat 512libzfs: libdevinfo libdevid libgen libnvpair libuutil libiscsitgt 513libzfs_jni: libdiskmgt libnvpair libzfs 514libzpool: libavl libumem libnvpair 515libsec: libavl 516brand: libc libsocket 517libshare: libscf libzfs libuuid libfsmgt libsecdb 518 519# 520# The reason this rule checks for the existence of the 521# Makefile is that some of the directories do not exist 522# in certain situations (e.g., exportable source builds, 523# OpenSolaris). 524# 525$(SUBDIRS): FRC 526 @if [ -f $@/Makefile ]; then \ 527 cd $@; pwd; $(MAKE) $(TARGET); \ 528 else \ 529 true; \ 530 fi 531 532$(SUBDIRS:%=%-nodepend): 533 @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ 534 cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ 535 else \ 536 true; \ 537 fi 538 539FRC: 540