1######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE 2# 3# This version of terminfo.src is distributed with ncurses and is maintained 4# by Thomas E. Dickey (TD). 5# 6# Report bugs and new terminal descriptions to 7# bug-ncurses@gnu.org 8# 9# $Revision: 1.399 $ 10# $Date: 2011/08/20 20:52:51 $ 11# 12# The original header is preserved below for reference. It is noted that there 13# is a "newer" version which differs in some cosmetic details (but actually 14# stopped updates several years ago); we have decided to not change the header 15# unless there is also a change in content. 16# 17# To further muddy the waters, it is noted that changes to this file as part of 18# maintenance of ncurses (since 1996) are generally conceded to be copyright 19# under the ncurses MIT-style license. That was the effect of the agreement 20# which the principal authors of ncurses made in 1998. However, since much of 21# the file itself is of unknown authorship (and the disclaimer below makes it 22# obvious that Raymond cannot or will not convey rights over those parts), 23# there is no explicit copyright notice on the file itself. 24# 25# It would also be a nuisance to split the file into unknown/known authorship 26# and move pieces as they are maintained, since many of the maintenance changes 27# have been small corrections to Raymond's translations to/from termcap format, 28# correcting the data but not the accompanying annotations. 29# 30# In any case, note that almost half of this file is not data but annotations 31# which reflect creative effort. Furthermore, the structure of entries to 32# reuse common chunks also is creative (and subject to copyright). Finally, 33# some portions of the data are derivative work under a compatible MIT-style 34# license from xterm. 35# 36#------------------------------------------------------------------------------ 37# Version 10.2.1 38# terminfo syntax 39# 40# Eric S. Raymond (current maintainer) 41# John Kunze, Berkeley 42# Craig Leres, Berkeley 43# 44# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu 45# address is no longer valid. The latest version can always be found at 46# <http://www.tuxedo.org/terminfo>. 47# 48# PURPOSE OF THIS FILE: 49# 50# This file describes the capabilities of various character-cell terminals, 51# as needed by software such as screen-oriented editors. 52# 53# Other terminfo and termcap files exist, supported by various OS vendors 54# or as relics of various older versions of UNIX. This one is the longest 55# and most comprehensive one in existence. It subsumes not only the entirety 56# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL 57# termcap file, but also large numbers of vendor-maintained termcap and 58# terminfo entries more complete and carefully tested than those in historical 59# termcap/terminfo versions. 60# 61# Pointers to related resources (including the ncurses distribution) may 62# be found at <http://www.tuxedo.org/terminfo>. 63# 64# INTERNATIONALIZATION: 65# 66# This file uses only the US-ASCII character set (no ISO8859 characters). 67# 68# This file assumes a US-ASCII character set. If you need to fix this, start 69# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers 70# for your character set. \E(A and \E)A enables the British character set 71# with the pound sign at position 2/3. 72# 73# In a Japanese-processing environment using EUC/Japanese or Shift-JIS, 74# C1 characters are considered the first-byte set of the Japanese encodings, 75# so \E)0 should be avoided in <enacs> and initialization strings. 76# 77# FILE FORMAT: 78# 79# The version you are looking at may be in any of three formats: master 80# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell 81# which by the format given in the header above. 82# 83# The master format is accepted and generated by the terminfo tools in the 84# ncurses suite; it differs from stock (System V-compatible) terminfo only 85# in that it admits a group of capabilities (prefixed `OT') equivalent to 86# various obsolete termcap capabilities. You can, thus, convert from master 87# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if 88# you have ncurses `tic -I' is nicer (among other things, it automatically 89# outputs entries in a canonical form). 90# 91# The termcap version is generated automatically from the master version 92# using tic -C. This filtering leaves in the OT capabilities under their 93# original termcap names. All translated entries fit within the 1023-byte 94# string-table limit of archaic termcap libraries except where explicitly 95# noted below. Note that the termcap translation assumes that your termcap 96# library can handle multiple tc capabilities in an entry. 4.4BSD has this 97# capability. Older versions of GNU termcap, through 1.3, do not. 98# 99# For details on these formats, see terminfo(7) in the ncurses distribution, 100# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD 101# curses has been declared obsolete by the caretakers of the 4.4BSD sources 102# as of June 1995; they are encouraging everyone to migrate to ncurses. 103# 104# Note: unlike some other distributed terminfo files (Novell Unix & SCO's), 105# no entry in this file has embedded comments. This is so source translation 106# to termcap only has to carry over leading comments. Also, no name field 107# contains embedded whitespace (such whitespace confuses rdist). 108# 109# Further note: older versions of this file were often installed with an editor 110# script (reorder) that moved the most common terminal types to the front of 111# the file. This should no longer be necessary, as the file is now ordered 112# roughly by type frequency with ANSI/VT100 and other common types up front. 113# 114# Some information has been merged in from terminfo files distributed by 115# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information 116# comes from vendors who maintain official terminfos for their hardware 117# (notably DEC and Wyse). 118# 119# A detailed change history is included at the end of this file. 120# 121# FILE ORGANIZATION: 122# 123# Comments in this file begin with # - they cannot appear in the middle 124# of a terminfo/termcap entry (this feature had to be sacrificed in order 125# to allow standard terminfo and termcap syntax to be generated cleanly from 126# the master format). Individual capabilities are commented out by 127# placing a period between the colon and the capability name. 128# 129# The file is divided up into major sections (headed by lines beginning with 130# the string "########") and minor sections (beginning with "####"); do 131# 132# grep "^####" <file> | more 133# 134# to see a listing of section headings. The intent of the divisions is 135# (a) to make it easier to find things, and (b) to order the database so 136# that important and frequently-encountered terminal types are near the 137# front (so that you'll get reasonable search efficiency from a linear 138# search of the termcap form even if you don't use reorder). Minor sections 139# usually correspond to manufacturers or standard terminal classes. 140# Parenthesized words following manufacturer names are type prefixes or 141# product line names used by that manufacturers. 142# 143# HOW TO READ THE ENTRIES: 144# 145# The first name in an entry is the canonical name for the model or 146# type, last entry is a verbose description. Others are mnemonic synonyms for 147# the terminal. 148# 149# Terminal names look like <manufacturer> <model> - <modes/options> 150# The part to the left of the dash, if a dash is present, describes the 151# particular hardware of the terminal. The part to the right may be used 152# for flags indicating special ROMs, extra memory, particular terminal modes, 153# or user preferences. 154# 155# All names should be in lower case, for consistency in typing. 156# 157# The following are conventionally used suffixes: 158# -2p Has two pages of memory. Likewise 4p, 8p, etc. 159# -am Enable auto-margin. 160# -m Monochrome. Suppress color support 161# -mc Magic-cookie. Some terminals (notably older Wyses) can 162# only support one attribute without magic-cookie lossage. 163# Their base entry is usually paired with another that 164# uses magic cookies to support multiple attributes. 165# -nam No auto-margin - suppress <am> capability 166# -nl No labels - suppress soft labels 167# -ns No status line - suppress status line 168# -rv Terminal in reverse video mode (black on white) 169# -s Enable status line. 170# -vb Use visible bell (<flash>) rather than <bel>. 171# -w Wide - in 132 column mode. 172# If a name has multiple suffixes and one is a line height, that one should 173# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. 174# 175# Entries with embedded plus signs are designed to be included through use/tc 176# capabilities, not used as standalone entries. 177# 178# To avoid search clashes, some older all-numeric names for terminals have 179# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). 180# All primary names of terminals now have alphanumeric prefixes. 181# 182# Comments marked "esr" are mostly results of applying the termcap-compiler 183# code packaged with ncurses and contemplating the resulting error messages. 184# In many cases, these indicated obvious fixes to syntax garbled by the 185# composers. In a few cases, I was able to deduce corrected forms for garbled 186# capabilities by looking at context. All the information in the original 187# entries is preserved in the comments. 188# 189# In the comments, terminfo capability names are bracketed with <> (angle 190# brackets). Termcap capability names are bracketed with :: (colons). 191# 192# INTERPRETATION OF USER CAPABILITIES 193# 194# The System V Release 4 and XPG4 terminfo format defines ten string 195# capabilities for use by applications, <u0>...<u9>. In this file, we use 196# certain of these capabilities to describe functions which are not covered 197# by terminfo. The mapping is as follows: 198# 199# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) 200# u8 terminal answerback description 201# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) 202# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) 203# 204# The terminal enquire string <u9> should elicit an answerback response 205# from the terminal. Common values for <u9> will be ^E (on older ASCII 206# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). 207# 208# The cursor position request (<u7>) string should elicit a cursor position 209# report. A typical value (for VT100 terminals) is \E[6n. 210# 211# The terminal answerback description (u8) must consist of an expected 212# answerback string. The string may contain the following scanf(3)-like 213# escapes: 214# 215# %c Accept any character 216# %[...] Accept any number of characters in the given set 217# 218# The cursor position report (<u6>) string must contain two scanf(3)-style 219# %d format elements. The first of these must correspond to the Y coordinate 220# and the second to the %d. If the string contains the sequence %i, it is 221# taken as an instruction to decrement each value after reading it (this is 222# the inverse sense from the cup string). The typical CPR value is 223# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). 224# 225# These capabilities are used by tack(1m), the terminfo action checker 226# (distributed with ncurses 5.0). 227# 228# TABSET FILES 229# 230# All the entries in this file have been edited to assume that the tabset 231# files directory is /usr/share/tabset, in conformance with the File Hierarchy 232# Standard for Linux and open-source BSD systems. Some vendors (notably Sun) 233# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. 234# 235# No curses package we know of actually uses these files. If their location 236# is an issue, you will have to hand-patch the file locations before compiling 237# this file. 238# 239# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL 240# 241# As the ANSI/ECMA-48 standard and variants take firmer hold, and as 242# character-cell terminals are increasingly replaced by X displays, much of 243# this file is becoming a historical document (this is part of the reason for 244# the new organization, which puts ANSI types, xterm, Unix consoles, 245# and vt100 up front in confidence that this will catch 95% of new hardware). 246# 247# For the terminal types still alive, I'd like to have manufacturer's 248# contact data (Internet address and/or snail-mail + phone). 249# 250# I'm also interested in enriching the comments so that the latter portions of 251# the file do in fact become a potted history of VDT technology as seen by 252# UNIX hackers. Ideally, I'd like the headers for each manufacturer to 253# include its live/dead/out-of-the-business status, and for as many 254# terminal types as possible to be tagged with information like years 255# of heaviest use, popularity, and interesting features. 256# 257# I'm especially interested in identifying the obscure entries listed under 258# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal 259# wisdom about them gets lost. If you know a lot about obscure old terminals, 260# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 261# eyeball it for things you can identify and describe. 262# 263# If you have been around long enough to contribute, please read the file 264# with this in mind and send me your annotations. 265# 266# COPYRIGHTS AND OTHER DELUSIONS 267# 268# The BSD ancestor of this file had a standard Regents of the University of 269# California copyright with dates from 1980 to 1993. 270# 271# Some information has been merged in from a terminfo file SCO distributes. 272# It has an obnoxious boilerplate copyright which I'm ignoring because they 273# took so much of the content from the ancestral BSD versions of this file 274# and didn't attribute it, thereby violating the BSD Regents' copyright. 275# 276# Not that anyone should care. However many valid functions copyrights may 277# serve, putting one on a termcap/terminfo file with hundreds of anonymous 278# contributors makes about as much sense as copyrighting a wall-full of 279# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. 280# 281# This file deliberately has no copyright. It belongs to no one and everyone. 282# If you claim you own it, you will merely succeed in looking like a fool. 283# Use it as you like. Use it at your own risk. Copy and redistribute freely. 284# There are no guarantees anywhere. Svaha! 285# 286 287######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES 288# 289# This section describes terminal classes and brands that are still 290# quite common. 291# 292 293#### Specials 294# 295# Special "terminals". These are used to label tty lines when you don't 296# know what kind of terminal is on it. The characteristics of an unknown 297# terminal are the lowest common denominator - they look about like a ti 700. 298# 299 300dumb|80-column dumb tty, 301 am, 302 cols#80, 303 bel=^G, cr=^M, cud1=^J, ind=^J, 304unknown|unknown terminal type, 305 gn, use=dumb, 306lpr|printer|line printer, 307 OTbs, hc, os, 308 cols#132, lines#66, 309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, 310glasstty|classic glass tty interpreting ASCII control characters, 311 OTbs, am, 312 cols#80, 313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, 314 kcud1=^J, nel=^M^J, .kbs=^H, 315 316vanilla|dumb tty, 317 OTbs, 318 bel=^G, cr=^M, cud1=^J, ind=^J, 319 320# This is almost the same as "dumb", but with no prespecified width. 321# DEL and ^C are hardcoded to act as kill characters. 322# ^D acts as a line break (just like newline). 323# It also interprets 324# \033];xxx\007 325# for compatibility with xterm -TD 3269term|Plan9 terminal emulator for X, 327 am, 328 OTnl=^J, bel=^G, cud1=^J, 329 330#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities 331# 332# See the end-of-file comment for more on these. 333# 334 335# ANSI capabilities are broken up into pieces, so that a terminal 336# implementing some ANSI subset can use many of them. 337ansi+local1, 338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 339ansi+local, 340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 341 cuu=\E[%p1%dA, use=ansi+local1, 342ansi+tabs, 343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, 344ansi+inittabs, 345 it#8, use=ansi+tabs, 346ansi+erase, 347 clear=\E[H\E[J, ed=\E[J, el=\E[K, 348ansi+rca, 349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 350ansi+cup, 351 cup=\E[%i%p1%d;%p2%dH, home=\E[H, 352ansi+rep, 353 rep=%p1%c\E[%p2%{1}%-%db, 354ansi+idl1, 355 dl1=\E[M, il1=\E[L, 356ansi+idl, 357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 358ansi+idc, 359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, 360ansi+arrows, 361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 362 khome=\E[H, 363ansi+sgr|ansi graphic renditions, 364 blink=\E[5m, invis=\E[8m, rev=\E[7m, 365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 366 sgr0=\E[0m, 367ansi+sgrso|ansi standout only, 368 rmso=\E[m, smso=\E[7m, 369ansi+sgrul|ansi underline only, 370 rmul=\E[m, smul=\E[4m, 371ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, 372 bold=\E[1m, 373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 375ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, 376 dim=\E[2m, 377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, 378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 379ansi+pp|ansi printer port, 380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 381ansi+csr|ansi scroll-region plus cursor save & restore, 382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 383 384# The IBM PC alternate character set. Plug this into any Intel console entry. 385# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the 386# ROM graphics for control characters such as the diamond, up- and down-arrow. 387# This works with the System V, Linux, and BSDI consoles. It's a safe bet this 388# will work with any Intel console, they all seem to have inherited \E[11m 389# from the ANSI.SYS de-facto standard. 390klone+acs|alternate character set for ansi.sys displays, 391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 392 rmacs=\E[10m, smacs=\E[11m, 393 394# Highlight controls corresponding to the ANSI.SYS standard. Most 395# console drivers for Intel boxes obey these. Makes the same assumption 396# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, 397# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. 398klone+sgr|attribute control for ansi.sys displays, 399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, 400 rmso=\E[m, rmul=\E[m, 401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, 402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 403 use=klone+acs, 404 405# Most Intel boxes do not treat "invis" (invisible) text. 406klone+sgr8|attribute control for ansi.sys displays, 407 invis=\E[8m, 408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 409 use=klone+sgr, 410 411# Highlight controls corresponding to the ANSI.SYS standard. *All* 412# console drivers for Intel boxes obey these. Does not assume \E[11m will 413# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS 414# diamond and arrow characters under curses. 415klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 417 rmul=\E[m, 418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 420 use=klone+acs, 421 422# KOI8-R (RFC1489) acs (alternate character set) 423# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. 424klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 426 rmacs=\E[10m, smacs=\E[11m, 427 428# ANSI.SYS color control. The setab/setaf caps depend on the coincidence 429# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer 430# but equivalent strings that don't rely on that coincidence: 431# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 432# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 433# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. 434# They match a subset of ECMA-48. 435klone+color|color control for ansi.sys and ISO6429-compatible displays, 436 colors#8, ncv#3, pairs#64, 437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 438 439# This is better than klone+color, it doesn't assume white-on-black as the 440# default color pair, but many `ANSI' terminals don't grok the <op> cap. 441ecma+color|color control for ECMA-48-compatible terminals, 442 AX, 443 colors#8, ncv#3, pairs#64, 444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 445 446# Attribute control for ECMA-48-compatible terminals 447ecma+sgr|attribute capabilities for true ECMA-48 terminals, 448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, 449 450# For comparison, here are all the capabilities implied by the Intel 451# Binary Compatibility Standard (level 2) that fit within terminfo. 452# For more detail on this rather pathetic standard, see the comments 453# near the end of this file. 454ibcs2|Intel Binary Compatibility Standard prescriptions, 455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, 456 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 457 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 458 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 459 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 460 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, 461 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, 462 463#### ANSI/ECMA-48 terminals and terminal emulators 464# 465# See near the end of this file for details on ANSI conformance. 466# Don't mess with these entries! Lots of other entries depend on them! 467# 468# This section lists entries in a least-capable to most-capable order. 469# if you're in doubt about what `ANSI' matches yours, try them in that 470# order and back off from the first that breaks. 471 472# ansi-mr is for ANSI terminals with ONLY relative cursor addressing 473# and more than one page of memory. It uses local motions instead of 474# direct cursor addressing, and makes almost no assumptions. It does 475# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. 476ansi-mr|mem rel cup ansi, 477 am, xon, 478 cols#80, lines#24, use=vanilla, use=ansi+erase, 479 use=ansi+local1, 480 481# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 482# beware of screen size problems and memory relative cursor addressing. 483ansi-mini|any ansi terminal with pessimistic assumptions, 484 am, xon, 485 cols#80, lines#24, use=vanilla, use=ansi+cup, 486 use=ansi+erase, 487 488# ansi-mtabs adds relative addressing and minimal tab support 489ansi-mtabs|any ansi terminal with pessimistic assumptions, 490 it#8, 491 ht=^I, use=ansi+local1, use=ansi-mini, 492 493# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL 494# 495# The following is an entry for the full ANSI 3.64 (1977). It lacks 496# padding, but most terminals using the standard are "fast" enough 497# not to require any -- even at 9600 bps. If you encounter problems, 498# try including the padding specifications. 499# 500# Note: the :as: and :ae: specifications are not implemented here, for 501# the available termcap documentation does not make clear WHICH alternate 502# character set to specify. ANSI 3.64 seems to make allowances for several. 503# Please make the appropriate adjustments to fit your needs -- that is 504# if you will be using alternate character sets. 505# 506# There are very few terminals running the full ANSI 3.64 standard, 507# so I could only test this entry on one verified terminal (Visual 102). 508# I would appreciate the results on other terminals sent to me. 509# 510# Please report comments, changes, and problems to: 511# 512# U.S. MAIL: Hugh Hansard 513# Box: 22830 514# Emory University 515# Atlanta, GA. 30322. 516# 517# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. 518# 519# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) 520ansi77|ansi 3.64 standard 1977 version, 521 OTbs, am, mir, 522 cols#80, it#8, lines#24, 523 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 524 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 525 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 526 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 527 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 528 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, 529 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 530 smso=\E[7m, smul=\E[4m, 531 532# Procomm and some other ANSI emulations don't recognize all of the ANSI- 533# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 534# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 535# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to 536# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem 537# to confuse many emulators. On the other hand, we can count on these programs 538# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 539# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under 540# ANSI.SYS influence. 541# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 542pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 543 OTbs, am, mir, msgr, 544 cols#80, it#8, lines#24, 545 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, 546 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 547 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 548 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 549 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, 550 use=klone+sgr-dumb, 551pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 552 lines#25, use=pcansi-m, 553pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 554 lines#33, use=pcansi-m, 555pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 556 lines#43, use=pcansi-m, 557# The color versions. All PC emulators do color... 558pcansi|ibm-pc terminal programs claiming to be ansi, 559 use=klone+color, use=pcansi-m, 560pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 561 lines#25, use=pcansi, 562pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 563 lines#33, use=pcansi, 564pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 565 lines#43, use=pcansi, 566 567# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. 568# If you want pound signs rather than dollars, replace `B' with `A' 569# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. 570# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 571ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 572 mc5i, 573 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 574 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 575 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 576 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, 577 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 578 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 579 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, 580 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g, 581 vpa=\E[%i%p1%dd, use=pcansi-m, 582 583ansi+enq|ncurses extension for ANSI ENQ, 584 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, 585 u9=\E[c, 586 587# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in 588# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. 589# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 590ansi|ansi/pc-term compatible with color, 591 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, 592 593# ansi-generic is a vanilla ANSI terminal. This is assumed to implement 594# all the normal ANSI stuff with no extensions. It assumes 595# insert/delete line/char is there, so it won't work with 596# vt100 clones. It assumes video attributes for bold, blink, 597# underline, and reverse, which won't matter much if the terminal 598# can't do some of those. Padding is assumed to be zero, which 599# shouldn't hurt since xon/xoff is assumed. 600ansi-generic|generic ansi standard terminal, 601 am, xon, 602 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 603 use=ansi+rca, use=ansi+erase, use=ansi+tabs, 604 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 605 use=ansi+sgrbold, use=ansi+arrows, 606 607#### DOS ANSI.SYS variants 608# 609# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS 610# documentation (except for the keyboard key reassignment feature, which 611# doesn't fit the <pfkey> model well). The klone+acs sequences were valid 612# though undocumented. The <pfkey> capability is untested but should work for 613# keys F1-F10 (%p1 values outside this range will yield unpredictable results). 614# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995 615ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 616 OTbs, am, mir, msgr, xon, 617 cols#80, lines#25, 618 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 620 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 621 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, 622 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, 623 u7=\E[6n, use=klone+color, use=klone+sgr8, 624 625# Keypad: Home=\0G Up=\0H PrPag=\0I 626# ka1,kh kcuu1 kpp,ka3 627# 628# Left=\0K 5=\0L Right=\0M 629# kcub1 kb2 kcuf1 630# 631# End=\0O Down=\0P NxPag=\0Q 632# kc1,kend kcud1 kc3,knp 633# 634# Ins=\0R Del=\0S 635# kich1 kdch1 636# 637# On keyboard with 12 function keys, 638# shifted f-keys: F13-F24 639# control f-keys: F25-F36 640# alt f-keys: F37-F48 641# The shift/control/alt keys do not modify each other, but alt overrides both, 642# and control overrides shift. 643# 644# <pfkey> capability for F1-F48 -TD 645ansi.sys|ANSI.SYS 3.1 and later versions, 646 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, 647 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 648 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, 649 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, 650 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, 651 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, 652 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, 653 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, 654 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, 655 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, 656 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, 657 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, 658 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p, 659 use=ansi.sys-old, 660 661# 662# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. 663# This should only be used when the terminal emulator cannot redefine the keys. 664# Since redefining keys with ansi.sys also affects PC-DOS programs, the key 665# definitions must be restored. If the terminal emulator is quit while in vi 666# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. 667# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix 668# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it 669# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. 670# Note that <kcub1> is always BS, because PC-dos can tolerate this change. 671# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. 672# Consequently the End keypad key could not be set (it is relatively safe and 673# actually useful because it sends ^@ O, which beeps and opens a line above). 674ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 675 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 676 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 677 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 678 use=ansi.sys, 679# 680# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. 681nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 682 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 683 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 684 use=ansi.sys, 685# 686# See ansi.sysk and nansi.sys above. 687nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 688 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 689 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 690 use=ansi.sysk, 691 692#### ANSI console types 693 694# 695# Atari ST terminals. 696# From Guido Flohr <gufl0000@stud.uni-sb.de>. 697# 698tw52|tw52-color|Toswin window manager with color, 699 bce, 700 colors#16, pairs#256, 701 oc=\Eb?\Ec0, op=\Eb?\Ec0, 702 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 703 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 704 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 705 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 706 use=tw52-m, 707tw52-m|Toswin window manager monochrome, 708 ul, 709 ma#999, 710 bold=\Eya, dch1=\Ea, dim=\EyB, 711 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, 712 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, 713 smso=\EyQ, smul=\EyH, use=at-m, 714tt52|Atari TT medium and high resolution, 715 lines#30, use=at-color, 716st52-color|at-color|atari-color|atari_st-color|Atari ST with color, 717 bce, 718 colors#16, pairs#256, 719 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, 720 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 721 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 722 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 723 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 724 use=st52, 725st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, 726 am, eo, mir, npc, 727 cols#80, it#8, lines#24, 728 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED, 729 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 730 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, 731 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, 732 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, 733 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 734 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, 735 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, 736 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, 737 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, 738 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, 739tw100|toswin vt100 window mgr, 740 eo, mir, msgr, xon, 741 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, 742 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 743 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, 744 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr, 745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, 746 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, 747 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, 748 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 749 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H, 750 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177, 751 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 752 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, 753 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 754 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, 755 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, 756 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, 757 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, 758 rmso=\E[m, rmul=\E[m, 759 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, 760 sc=\E7, 761 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 762 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 763 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, 764 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 765# The entries for stv52 and stv52pc probably need a revision. 766stv52|MiNT virtual console, 767 am, msgr, 768 cols#80, it#8, lines#30, 769 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 770 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 772 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 773 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 774 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 775 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 776 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 777 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 778 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 779 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, 780 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, 781 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, 782stv52pc|MiNT virtual console with PC charset, 783 am, msgr, 784 cols#80, it#8, lines#30, 785 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371, 786 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 787 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 788 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 789 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 790 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 791 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 792 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 793 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 794 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 795 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 796 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, 797 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, 798 smso=\Ep, smul=\EyH, 799 800#### Atari ST 801# 802 803# From: Simson L. Garfinkel <simsong@media-lab.mit.edu> 804atari-old|atari st, 805 OTbs, am, 806 cols#80, it#8, lines#25, 807 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 808 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 809 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, 810 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 811# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode 812# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> 813uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 814 lines#49, 815 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, 816 use=vt220, 817# MiNT VT52 emulation. 80 columns, 25 rows. 818# MiNT is Now TOS, the operating system which comes with all Ataris now 819# (mainly Atari Falcon). This termcap is for the VT52 emulation you get 820# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode 821# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996 822st52-old|Atari ST with VT52 emulation, 823 am, km, 824 cols#80, lines#25, 825 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, 826 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 827 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 828 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, 829 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, 830 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, 831 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, 832 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, 833 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, 834 smcup=\Ee, smso=\Ep, 835 836#### BeOS 837# 838# BeOS entry for Terminal program Seems to be almost ANSI 839beterm|BeOS Terminal, 840 am, eo, mir, msgr, xenl, xon, 841 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 842 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 843 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 844 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 845 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 846 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 847 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 848 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 849 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 850 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 851 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 852 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 853 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 854 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 855 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 856 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, 857 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 858 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, 859 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, 860 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, 861 vpa=\E[%i%p1%dd, 862 863#### Linux consoles 864# 865 866# This entry is good for the 1.2.13 or later version of the Linux console. 867# 868# *************************************************************************** 869# * * 870# * WARNING: * 871# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * 872# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * 873# * character. Here are the keymap replacement lines that will set this up: * 874# * * 875# keycode 15 = Tab Tab 876# alt keycode 15 = Meta_Tab 877# shift keycode 15 = F26 878# string F26 ="\033[Z" 879# * * 880# * This has to use a key slot which is unfortunate (any unused one will * 881# * do, F26 is the higher-numbered one). The change ought to be built * 882# * into the kernel tables. * 883# * * 884# *************************************************************************** 885# 886# All linux kernels since 1.2.13 (at least) set the screen size 887# themselves; this entry assumes that capability. 888# 889linux-basic|linux console, 890 am, bce, eo, mir, msgr, xenl, xon, 891 it#8, ncv#18, U8#1, 892 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 893 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 894 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 895 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 896 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 897 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 898 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 899 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 900 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, 901 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 902 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 903 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 904 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 905 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 906 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 907 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 908 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, 909 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 910 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 911 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, 912 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, 913 use=ecma+color, 914 915linux-m|Linux console no color, 916 colors@, pairs@, 917 setab@, setaf@, setb@, setf@, use=linux, 918 919# The 1.3.x kernels add color-change capabilities; if yours doesn't have this 920# and it matters, turn off <ccc>. The %02x escape used to implement this is 921# not supposedly back-portable to older SV curses (although it has worked fine 922# on Solaris for several years) and not supported in ncurses versions before 923# 1.9.9. 924linux-c-nc|linux console with color-change, 925 ccc, 926 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 927 oc=\E]R, use=linux-basic, 928# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 929linux-c|linux console 1.3.6+ for older ncurses, 930 ccc, 931 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, 932 oc=\E]R, use=linux-basic, 933 934# The 2.2.x kernels add a private mode that sets the cursor type; use that to 935# get a block cursor for cvvis. 936# reported by Frank Heckenbach <frank@g-n-u.de>. 937linux2.2|linux 2.2.x console, 938 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 939 cvvis=\E[?25h\E[?8c, use=linux-c-nc, 940 941# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: 942# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html 943# Using SI/SO has the drawback that it confuses screen. SCS would work. 944# However, SCS is buggy (see comment in Debian #515609) -TD 945linux2.6|linux 2.6.x console, 946 rmacs=^O, 947 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 948 sgr0=\E[m\017, smacs=^N, use=linux2.2, 949 950# The 3.0 kernel adds support for clearing scrollback buffer (capability E3). 951linux3.0|linux 3.0 kernels, 952 E3=\E[3;J, use=linux2.6, 953 954linux|linux console, 955 use=linux3.0, 956 957# Subject: linux 2.6.26 vt back_color_erase 958# Changes to the Linux console driver broke bce model as reported in 959# https://bugzilla.novell.com/show_bug.cgi?id=418613 960# apparently from 961# http://lkml.org/lkml/2008/4/26/305 962# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e 963linux2.6.26|linux console w/o bce, 964 bce@, use=linux2.6, 965 966# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 967linux-nic|linux with ich/ich1 suppressed for non-curses programs, 968 ich@, ich1@, use=linux, 969 970# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. 971# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. 972linux-koi8|linux with koi8 alternate character set, 973 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 974 use=linux, use=klone+koi8acs, 975 976# Another entry for KOI8-r with Qing Long's acsc. 977# (which one better complies with the standard?) 978linux-koi8r|linux with koi8-r alternate character set, 979 use=linux, use=klone+koi8acs, 980 981# Entry for the latin1 and latin2 fonts 982linux-lat|linux with latin1 or latin2 alternate character set, 983 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 984 use=linux, 985 986# This uses graphics from VT codeset instead of from cp437. 987# reason: cp437 (aka "straight to font") is not functional under luit. 988# from: Andrey V Lukyanov <land@long.yar.ru>. 989linux-vt|linux console using VT codes for graphics, 990 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 991 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 992 smpch@, use=linux, 993 994# This is based on the Linux console (relies on the console to perform some 995# of the functionality), but does not recognize as many control sequences. 996# The program comes bundled with an old (circa 1998) copy of the Linux 997# console terminfo. It recognizes some non-ANSI/VT100 sequences such as 998# \E* move cursor to home, as as \E[H 999# \E,X same as \E(X 1000# \EE move cursor to beginning of row 1001# \E[y,xf same as \E[y,xH 1002# 1003# Note: The status-line support is buggy (dsl does not work). 1004kon|kon2|jfbterm|Kanji ON Linux console, 1005 ccc@, hs, 1006 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@, 1007 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, 1008 use=linux, 1009 1010# 16-color linux console entry; this works with a 256-character 1011# console font but bright background colors turn into dim ones when 1012# you use a 512-character console font. This uses bold for bright 1013# foreground colors and blink for bright background colors. 1014linux-16color|linux console with 16 colors, 1015 colors#16, ncv#54, pairs#256, 1016 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m, 1017 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m, 1018 use=linux, 1019 1020# bterm (bogl 0.1.18) 1021# Implementation is in bogl-term.c 1022# Key capabilities from linux terminfo entry 1023# 1024# Notes: 1025# bterm only supports acs using wide-characters, has case for these: qjxamlkut 1026# bterm does not support sgr, since it only processes one parameter -TD 1027bterm|bogl virtual terminal, 1028 am, bce, 1029 colors#8, cols#80, lines#24, pairs#64, 1030 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l, 1031 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 1032 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J, 1033 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 1034 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 1035 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1036 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1037 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 1038 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1039 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 1040 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, 1041 op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, 1042 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1043 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, 1044 1045#### Mach 1046# 1047 1048# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> 1049mach|Mach Console, 1050 am, km, 1051 cols#80, it#8, lines#25, 1052 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 1053 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1054 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1055 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1056 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, 1057 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1058 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 1059 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 1060 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 1061 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 1062 smso=\E[7m, smul=\E[4m, 1063mach-bold|Mach Console with bold instead of underline, 1064 rmul=\E[0m, smul=\E[1m, use=mach, 1065mach-color|Mach Console with ANSI color, 1066 colors#8, pairs#64, 1067 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 1068 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 1069 1070# From: Marcus Brinkmann 1071# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ 1072# 1073# Comments in the original are summarized here: 1074# 1075# hurd uses 8-bit characters (km). 1076# 1077# Although it doesn't do XON/XOFF, we don't want padding characters (xon). 1078# 1079# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't 1080# have the eat_newline_glitch. It doesn't support setting or removing tab 1081# stops (hts/tbc). 1082# 1083# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is 1084# one byte instead three. 1085# 1086# <ich1> is not included because hurd has insert mode. 1087# 1088# hurd doesn't use ^J for scrolling, because this could put things into the 1089# scrollback buffer. 1090# 1091# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 1092# This is a GNU extension. 1093# 1094# The original has commented-out ncv, but is restored here. 1095# 1096# Reading the source, RIS resets cnorm, but not xmous. 1097hurd|The GNU Hurd console server, 1098 am, bce, bw, eo, km, mir, msgr, xon, 1099 colors#8, it#8, ncv#18, pairs#64, 1100 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1101 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1102 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1103 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1104 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1105 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, 1106 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1107 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, 1108 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 1109 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 1110 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, 1111 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 1112 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 1113 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1114 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1115 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 1116 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 1117 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 1118 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, 1119 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, 1120 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, 1121 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1122 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1123 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, 1124 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, 1125 gsbom=\E[>1h, 1126 1127#### OSF Unix 1128# 1129 1130# OSF/1 1.1 Snapshot 2 1131pmcons|pmconsole|PMAX console, 1132 am, 1133 cols#128, lines#57, 1134 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, 1135 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1136 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 1137 1138# SCO console and SOS-Syscons console for 386bsd 1139# (scoansi: had unknown capabilities 1140# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ 1141# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: 1142# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ 1143# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ 1144# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ 1145# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based 1146# on the <smacs>=\E[12m -- esr) 1147# 1148# klone+sgr-dumb is an error since the acsc does not match -TD 1149# 1150# In this description based on SCO's keyboard(HW) manpage list of default 1151# function key values: 1152# F13-F24 are shifted F1-F12 1153# F25-F36 are control F1-F12 1154# F37-F48 are shift+control F1-F12 1155# 1156# hpa/vpa work in the console, but not in scoterm: 1157# hpa=\E[%p1%dG, 1158# vpa=\E[%p1%dd, 1159# 1160# SCO's terminfo uses 1161# kLFT=\E[d, 1162# kRIT=\E[c, 1163# which do not work (console or scoterm). 1164# 1165# Console documents only 3 attributes can be set with SGR (so we don't use sgr). 1166scoansi-old|SCO Extended ANSI standard crt (5.0.5), 1167 OTbs, am, bce, eo, xon, 1168 colors#8, cols#80, it#8, lines#25, pairs#64, 1169 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, 1170 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 1171 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 1172 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1173 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1174 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 1175 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 1176 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 1177 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 1178 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, 1179 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1180 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 1181 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, 1182 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, 1183 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, 1184 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, 1185 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, 1186 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, 1187 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], 1188 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, 1189 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 1190 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, 1191 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, 1192 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 1193 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 1194 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 1195scoansi-new|SCO Extended ANSI standard crt (5.0.6), 1196 km, 1197 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 1198 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 1199 rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 1200 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 1201 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 1202 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 1203 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 1204 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 1205 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 1206 use=scoansi-old, 1207# make this easy to change... 1208scoansi|SCO Extended ANSI standard crt, 1209 use=scoansi-old, 1210 1211# This actually describes the generic SVr4 display driver for Intel boxes. 1212# The <dim=\E[2m> isn't documented and therefore may not be reliable. 1213# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 1214att6386|at386|386at|AT&T WGS 6386 console, 1215 am, bw, eo, xon, 1216 cols#80, it#8, lines#25, 1217 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 1218 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 1219 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, 1220 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 1221 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1222 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1223 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1224 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 1225 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 1226 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, 1227 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1228 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, 1229 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 1230 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, 1231 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, 1232 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 1233 sc=\E7, 1234 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 1235 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 1236 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color, 1237# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) 1238pc6300plus|AT&T 6300 plus, 1239 OTbs, am, xon, 1240 cols#80, lines#24, 1241 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 1242 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, 1243 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 1244 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 1245 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, 1246 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1247 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 1248 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 1249 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 1250 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1251 1252# From: Benjamin C. W. Sittler <bsittler@nmt.edu> 1253# 1254# I have a UNIX PC which I use as a terminal attached to my Linux PC. 1255# Unfortunately, the UNIX PC terminfo entry that comes with ncurses 1256# is broken. All the special key sequences are broken, making it unusable 1257# with Emacs. The problem stems from the following: 1258# 1259# The UNIX PC has a plethora of keys (103 of them, and there's no numeric 1260# keypad!), loadable fonts, and strange highlighting modes ("dithered" 1261# half-intensity, "smeared" bold, and real strike-out, for example.) It also 1262# uses resizable terminal windows, but the bundled terminal program always 1263# uses an 80x24 window (and doesn't support seem to support a 132-column 1264# mode.) 1265# 1266# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a 1267# library which was a superset of SVr3.5 curses (called tam, for "terminal 1268# access method".) tam includes support for real, overlapping windows, 1269# onscreen function key labels, and bitmap graphics. But since the primary 1270# user interface on the UNIX PC was a GUI program (ua, for "user 1271# assistant",) and remote administration was considered important for the 1272# machine, tam also supported VT100-compatible terminals attached to the 1273# serial port or used across the StarLan network. To simulate the extra keys 1274# not present on a VT100, users could press ESC and a two-letter sequence, 1275# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, 1276# however, were not the same as those sent by the actual Undo key. The 1277# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. 1278# (If you're interested in adding some of the tam calls to ncurses, btw, I 1279# have the full documentation and several programs which use tam. It also 1280# used an extended terminfo format to describe key sequences, special 1281# highlighting modes, etc.) 1282# 1283# KEYS: This means that ncurses would quite painful on the UNIX PC, since 1284# there are two sequences for every key-modifier combination (local keyboard 1285# sequence and remote "VT100" sequence.) But I doubt many people are trying 1286# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the 1287# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 1288# seem to have been built from the manual describing the VT100 sequences. 1289# This means it doesn't work for a real live UNIX PC. 1290# 1291# FONTS: The UNIX PC also has a strange interpretation of "alternate 1292# character set". Rather than the VT100 graphics you might expect, it allows 1293# up to 8 custom fonts to be loaded at any given time. This means that 1294# programs expecting VT100 graphics will usually be disappointed. For this 1295# reason I have disabled the smacs/rmacs sequences, but they could easily be 1296# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 1297# manpage), should you wish to do so: 1298# 1299# SGR10 - Select font 0 - ESC [ 10 m or SO 1300# SGR11 - Select font 1 - ESC [ 11 m or SI 1301# SGR12 - Select font 2 - ESC [ 12 m 1302# ... (etc.) 1303# SGR17 - Select font 7 - ESC [ 17 m 1304# 1305# Graphics for line drawing are not reliably found at *any* character 1306# location because the UNIX PC has dynamically reloadable fonts. I use font 1307# 0 for regular text and font 1 for italics, but this is by no means 1308# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. 1309# 1310# MISC: The cursor visible/cursor invisible sequences were swapped in the 1311# distributed terminfo. 1312# 1313# To ameliorate these problems (and fix a few highlighting bugs) I rewrote 1314# the UNIX PC terminfo entry. The modified version works great with Lynx, 1315# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC 1316# attached by serial cable. In Emacs, even the Undo key works, and many 1317# applications can now use the F1-F8 keys. 1318# 1319# esr's notes: 1320# Terminfo entry for the AT&T Unix PC 7300 1321# from escape(7) in Unix PC 7300 Manual. 1322# Somewhat similar to a vt100-am (but different enough 1323# to redo this from scratch.) 1324# 1325# /*************************************************************** 1326# * 1327# * FONT LOADING PROGRAM FOR THE UNIX PC 1328# * 1329# * This routine loads a font defined in the file ALTFONT 1330# * into font memory slot #1. Once the font has been loaded, 1331# * it can be used as an alternative character set. 1332# * 1333# * The call to ioctl with the argument WIOCLFONT is the key 1334# * to this routine. For more information, see window(7) in 1335# * the PC 7300 documentation. 1336# ***************************************************************/ 1337# #include <string.h> /* needed for strcpy call */ 1338# #include <sys/window.h> /* needed for ioctl call */ 1339# #define FNSIZE 60 /* font name size */ 1340# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ 1341# /* 1342# * The file /usr/lib/wfont/special.8.ft comes with the 1343# * standard PC software. It defines a graphics character set 1344# * similar to that of the Teletype 5425 terminal. To view 1345# * this or other fonts in /usr/lib/wfont, use the command 1346# * cfont <filename>. For further information on fonts see 1347# * cfont(1) in the PC 7300 documentation. 1348# */ 1349# 1350# struct altfdata /* structure for alt font data */ 1351# { 1352# short altf_slot; /* memory slot number */ 1353# char altf_name[FNSIZE]; /* font name (file name) */ 1354# }; 1355# ldfont() 1356# { 1357# int wd; /* window in which altfont will be */ 1358# struct altfdata altf; 1359# altf.altf_slot=1; 1360# strcpy(altf.altf_name,ALTFONT); 1361# for (wd =1; wd < 12; wd++) { 1362# ioctl(wd, WIOCLFONT,&altf); 1363# } 1364# } 1365# 1366# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, 1367# they're confirmed by the man page for the System V display---esr) 1368# 1369att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 1370 am, xon, 1371 cols#80, it#8, lines#24, 1372 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 1373 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 1374 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 1375 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1376 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1377 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 1378 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 1379 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 1380 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 1381 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 1382 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 1383 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 1384 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 1385 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 1386 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 1387 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 1388 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 1389 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 1390 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 1391 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 1392 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 1393 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 1394 smul=\E[4m, 1395 1396# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is 1397# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes 1398# for the application keypad mode. We have added iris-ansi-ap rather than 1399# change the original to keypad mode. 1400# 1401# (iris-ansi: added rmam/smam based on init string -- esr) 1402# 1403# This entry, and those derived from it, is used in xwsh (also known as 1404# winterm). Some capabilities that do not fit into the terminfo model 1405# include the shift- and control-functionkeys: 1406# 1407# F1-F12 generate different codes when shift or control modifiers are used. 1408# For example: 1409# F1 \E[001q 1410# shift F1 \E[013q 1411# control-F1 \E[025q 1412# 1413# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., 1414# \EOP to \EOS. The shifted and control modifiers still do the same thing. 1415# 1416# The cursor keys also have different codes: 1417# control-up \E[162q 1418# control-down \E[165q 1419# control-left \E[159q 1420# control-right \E[168q 1421# 1422# shift-up \E[161q 1423# shift-down \E[164q 1424# shift-left \E[158q 1425# shift-right \E[167q 1426# 1427# control-tab \[072q 1428# 1429iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 1430 am, 1431 cols#80, it#8, lines#40, 1432 bel=^G, bold=\E[1m, clear=\E[H\E[2J, 1433 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 1434 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 1435 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1436 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 1437 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 1438 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 1439 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 1440 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 1441 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1442 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 1443 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 1444 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 1445 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 1446 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 1447 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 1448 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 1449 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 1450 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 1451 tbc=\E[3g, 1452iris-ansi-ap|IRIS ANSI in application-keypad mode, 1453 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 1454 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 1455 1456# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX 1457# (T.Dickey 98/1/24) 1458iris-color|xwsh|IRIX ANSI with color, 1459 ncv#33, 1460 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 1461 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 1462 rmul=\E[24m, rs1=\Ec, 1463 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1464 sitm=\E[3m, use=vt100+enq, use=klone+color, 1465 use=iris-ansi-ap, 1466 1467# The following is a version of the ibm-pc entry distributed with PC/IX, 1468# (Interactive Systems' System 3 for the Big Blue), modified by Richard 1469# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, 1470# (the former is untrue, and the latter failed under UCB/man); standout and 1471# underline modes have been added. Note: this entry describes the "native" 1472# capabilities of the PC monochrome display, without ANY emulation; most 1473# communications packages (but NOT PC/IX connect) do some kind of emulation. 1474pcix|PC/IX console, 1475 am, bw, eo, 1476 cols#80, lines#24, 1477 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 1478 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 1479 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 1480 smul=\E[4m, 1481 1482# (ibmpcx: this entry used to be known as ibmx. 1483# It formerly included the following extension capabilities: 1484# :GC=b:GL=v:GR=t:RT=^J:\ 1485# :GH=\E[196g:GV=\E[179g:\ 1486# :GU=\E[193g:GD=\E[194g:\ 1487# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ 1488# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ 1489# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ 1490# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate 1491# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match 1492# what was there before. -- esr) 1493ibmpcx|xenix|ibmx|IBM PC xenix console display, 1494 OTbs, am, msgr, 1495 cols#80, lines#25, 1496 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 1497 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 1498 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 1499 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 1500 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 1501 kpp=\E[Z, use=klone+acs, use=klone+sgr8, 1502 1503#### QNX 1504# 1505 1506# QNX 4.0 Console 1507# Michael's original version of this entry had <am@>, <smcup=\Ei>, 1508# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower 1509# right corner without triggering a scroll. The ncurses terminfo library can 1510# handle this case with the <ich1> capability, and prefers <am> for better 1511# optimization. Bug: The <op> capability resets attributes. 1512# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996 1513# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) 1514qnx|qnx4|qnx console, 1515 daisy, km, mir, msgr, xhpa, xt, 1516 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 1517 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 1518 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 1519 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 1520 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 1521 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 1522 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 1523 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 1524 kDL=\377\366, kEND=\377\301, kEOL=\377\311, 1525 kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 1526 kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 1527 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 1528 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 1529 kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 1530 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 1531 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 1532 kclo=\377\343, kclr=\377\341, kcmd=\377\245, 1533 kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 1534 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 1535 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 1536 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 1537 kext=\377\270, kf1=\377\201, kf10=\377\212, 1538 kf11=\377\256, kf12=\377\257, kf13=\377\213, 1539 kf14=\377\214, kf15=\377\215, kf16=\377\216, 1540 kf17=\377\217, kf18=\377\220, kf19=\377\221, 1541 kf2=\377\202, kf20=\377\222, kf21=\377\223, 1542 kf22=\377\224, kf23=\377\333, kf24=\377\334, 1543 kf25=\377\225, kf26=\377\226, kf27=\377\227, 1544 kf28=\377\230, kf29=\377\231, kf3=\377\203, 1545 kf30=\377\232, kf31=\377\233, kf32=\377\234, 1546 kf33=\377\235, kf34=\377\236, kf35=\377\276, 1547 kf36=\377\277, kf37=\377\321, kf38=\377\322, 1548 kf39=\377\323, kf4=\377\204, kf40=\377\324, 1549 kf41=\377\325, kf42=\377\326, kf43=\377\327, 1550 kf44=\377\330, kf45=\377\331, kf46=\377\332, 1551 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 1552 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 1553 khlp=\377\350, khome=\377\240, khts=\377\342, 1554 kich1=\377\253, kil1=\377\273, kind=\377\261, 1555 kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 1556 knp=\377\252, knxt=\377\312, kopn=\377\357, 1557 kopt=\377\353, kpp=\377\242, kprt=\377\255, 1558 kprv=\377\302, krdo=\377\336, kref=\377\354, 1559 kres=\377\360, krfr=\377\347, kri=\377\271, 1560 krmir=\377\313, krpl=\377\362, krst=\377\352, 1561 ksav=\377\361, kslt=\377\247, kspd=\377\335, 1562 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 1563 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 1564 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 1565 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 1566 smso=\E(, smul=\E[, 1567# 1568# 1569qnxt|qnxt4|QNX4 terminal, 1570 crxm, use=qnx4, 1571# 1572qnxm|QNX4 with mouse events, 1573 maddr#1, 1574 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 1575 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 1576 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 1577 smicm=\E/>2h, use=qnx4, 1578# 1579qnxw|QNX4 windows, 1580 xvpa, use=qnxm, 1581# 1582# Monochrome QNX4 terminal or console. Setting this terminal type will 1583# allow an application running on a color console to behave as if it 1584# were a monochrome terminal. Output will be through stdout instead of 1585# console writes because the term routines will recognize that the 1586# terminal name starts with 'qnxt'. 1587# 1588qnxtmono|Monochrome QNX4 terminal or console, 1589 colors@, pairs@, 1590 scp@, use=qnx4, 1591 1592# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998 1593# (esr: commented out <scp> and <rmcup> to avoid warnings.) 1594# (TD: derive from original qnx4 entry) 1595qnxt2|qnx 2.15 serial terminal, 1596 am, 1597 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 1598 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 1599 1600# QNX ANSI terminal definition 1601qansi-g|QNX ANSI, 1602 am, eslok, hs, xon, 1603 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 1604 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1605 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1606 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 1607 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 1608 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1609 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 1610 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1611 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 1612 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 1613 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1614 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 1615 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 1616 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 1617 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 1618 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 1619 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 1620 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 1621 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 1622 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 1623 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 1624 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 1625 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 1626 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 1627 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 1628 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 1629 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 1630 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 1631 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 1632 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 1633 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 1634 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 1635 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 1636 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 1637 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 1638 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 1639 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 1640 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 1641 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 1642 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1643 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1644 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1645 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 1646 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 1647 smul=\E[4m, tbc=\E[3g, 1648 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 1649# 1650qansi|QNX ansi with console writes, 1651 daisy, xhpa, use=qansi-g, 1652# 1653qansi-t|QNX ansi without console writes, 1654 crxm, use=qansi, 1655# 1656qansi-m|QNX ansi with mouse, 1657 maddr#1, 1658 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 1659 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 1660 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 1661 smicm=\E[>2h, use=qansi, 1662# 1663qansi-w|QNX ansi for windows, 1664 xvpa, use=qansi-m, 1665 1666#### NetBSD consoles 1667# 1668# pcvt termcap database entries (corresponding to release 3.31) 1669# Author's last edit-date: [Fri Sep 15 20:29:10 1995] 1670# 1671# (For the terminfo master file, I translated these into terminfo syntax. 1672# Then I dropped all the pseudo-HP entries. we don't want and can't use 1673# the :Xs: flag. Then I split :is: into a size-independent <is1> and a 1674# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) 1675 1676# NOTE: <ich1> has been taken out of this entry. for reference, it should 1677# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. 1678# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) 1679pcvtXX|pcvt vt200 emulator (DEC VT220), 1680 am, km, mir, msgr, xenl, 1681 it#8, vt#3, 1682 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 1683 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 1684 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 1685 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1686 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1687 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1688 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1689 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 1690 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, 1691 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 1692 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 1693 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 1694 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 1695 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 1696 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 1697 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 1698 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 1699 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1700 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 1701 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1702 1703# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1704# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1705# 50 lines entries; 80 columns 1706pcvt25|dec vt220 emulation with 25 lines, 1707 cols#80, lines#25, 1708 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1709pcvt28|dec vt220 emulation with 28 lines, 1710 cols#80, lines#28, 1711 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1712pcvt35|dec vt220 emulation with 35 lines, 1713 cols#80, lines#35, 1714 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1715pcvt40|dec vt220 emulation with 40 lines, 1716 cols#80, lines#40, 1717 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1718pcvt43|dec vt220 emulation with 43 lines, 1719 cols#80, lines#43, 1720 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1721pcvt50|dec vt220 emulation with 50 lines, 1722 cols#80, lines#50, 1723 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1724 1725# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1726# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1727# 50 lines entries; 132 columns 1728pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 1729 cols#132, lines#25, 1730 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1731pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 1732 cols#132, lines#28, 1733 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1734pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 1735 cols#132, lines#35, 1736 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1737pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 1738 cols#132, lines#40, 1739 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1740pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 1741 cols#132, lines#43, 1742 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1743pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 1744 cols#132, lines#50, 1745 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1746 1747# OpenBSD implements a color variation 1748pcvt25-color|dec vt220 emulation with 25 lines and color, 1749 cols#80, lines#25, 1750 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 1751 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1752 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1753 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 1754 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 1755 use=ecma+color, 1756 1757# Terminfo entries to enable the use of the ncurses library in colour on a 1758# NetBSD-arm32 console (only tested on a RiscPC). 1759# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 1760# modified codes for setf/setb to setaf/setab, then to klone+color, corrected 1761# typo in invis - TD 1762arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 1763 am, bce, msgr, xenl, xon, 1764 cols#80, it#8, lines#30, 1765 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1766 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 1767 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1768 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1769 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 1770 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 1771 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 1772 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, 1773 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 1774 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1775 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 1776 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 1777 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 1778 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 1779 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1780 sc=\E7, 1781 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 1782 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 1783 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 1784 use=klone+color, 1785 1786arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 1787 cols#132, lines#50, use=arm100, 1788 1789# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine 1790# manufactured by Sharp for the Japenese market. 1791# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 1792x68k|x68k-ite|NetBSD/x68k ITE, 1793 cols#96, lines#32, 1794 kclr=\E[9~, khlp=\E[28~, use=vt220, 1795 1796# <tv@pobox.com>: 1797# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. 1798# 1799# (still unfinished, but good enough so far.) 1800ofcons|DNARD OpenFirmware console, 1801 bw, 1802 cols#80, lines#30, 1803 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, 1804 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 1805 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 1806 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 1807 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 1808 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 1809 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, 1810 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 1811 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 1812 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 1813 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, 1814 rmso=\2330m, rmul=\2330m, 1815 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 1816 sgr0=\2330m, 1817 1818# NetBSD "wscons" emulator in vt220 mode. 1819# This entry is based on the NetBSD termcap entry, correcting the ncv value. 1820# The emulator renders underlined text in red. Colors are otherwise usable. 1821# 1822# Testing the emulator and reading the source code (NetBSD 2.0), it appears 1823# that "vt220" is inaccurate. There are a few vt220-features, but most of the 1824# vt220 screens in vttest do not work with this emulator. For instance, it 1825# identifies itself (primary DA response) as a vt220 with selective erase. But 1826# the selective erase feature does not work. The secondary response is copied 1827# from Kermit's emulation of vt220, does not correspond to actual vt220. At 1828# the level of detail in a termcap, it is a passable emulator, since ECH does 1829# work. Don't use it on a VMS system -TD 1830wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 1831 bce, msgr, 1832 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, 1833 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, 1834 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 1835 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 1836 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec, 1837 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220, 1838 1839wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 1840 km, use=wsvt25, 1841 1842# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 1843# DECstation/pmax. 1844rcons|BSD rasterconsole, 1845 use=sun-il, 1846# Color version of above. Color currently only provided by NetBSD. 1847rcons-color|BSD rasterconsole with ANSI color, 1848 bce, 1849 colors#8, pairs#64, 1850 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 1851 1852# mgterm -- MGL/MGL2, MobileGear Graphic Library 1853# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} 1854# -- the setf/setb are probably incorrect, more likely setaf/setab -TD 1855# -- compare with cons25w 1856mgterm, 1857 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 1858 colors#8, cols#80, it#8, lines#18, pairs#64, 1859 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1860 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1861 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1862 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1863 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 1864 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 1865 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1866 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1867 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1868 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1869 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 1870 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 1871 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 1872 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 1873 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, 1874 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1875 1876#### FreeBSD console entries 1877# 1878# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 1879# Andrey Chernov maintains the FreeBSD termcap distributions. 1880# 1881# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade 1882# or comment out the :cb: capability in the console entry. 1883# 1884# Alexander Lukyanov reports: 1885# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. 1886# Now el1 clears not only to the line beginning, but also a large chunk 1887# of previous line. But there is another bug - ech does not work at all. 1888# 1889 1890# for syscons 1891# common entry without semigraphics 1892# Bug: The <op> capability resets attributes. 1893# Bug? The ech and el1 attributes appear to move the cursor in some cases; for 1894# instance el1 does if the cursor is moved to the right margin first. Removed 1895# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) 1896# 1897# Setting colors turns off reverse; we cannot guarantee order, so use ncv. 1898# Note that this disables standout with color. 1899# 1900# The emulator sends difference strings based on shift- and control-keys, 1901# like scoansi: 1902# F13-F24 are shifted F1-F12 1903# F25-F36 are control F1-F12 1904# F37-F48 are shift+control F1-F12 1905cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 1906 am, bce, bw, eo, msgr, npc, 1907 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 1908 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1909 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 1910 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1912 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 1913 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1914 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1915 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1916 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1917 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1918 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, 1919 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, 1920 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, 1921 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, 1922 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, 1923 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, 1924 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, 1925 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, 1926 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, 1927 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 1928 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, 1929 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, 1930 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1931 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1932 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1933cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 1934 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 1935 use=cons25w, 1936cons25-debian|freebsd console with debian backspace (25-line ansi mode), 1937 kbs=\177, kdch1=\E[3~, use=cons25, 1938cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 1939 colors@, pairs@, 1940 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1941 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1942 smul=\E[4m, use=cons25, 1943cons30|ansi80x30|freebsd console (30-line ansi mode), 1944 lines#30, use=cons25, 1945cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 1946 lines#30, use=cons25-m, 1947cons43|ansi80x43|freebsd console (43-line ansi mode), 1948 lines#43, use=cons25, 1949cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 1950 lines#43, use=cons25-m, 1951cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 1952 lines#50, use=cons25, 1953cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 1954 lines#50, use=cons25-m, 1955cons60|ansi80x60|freebsd console (60-line ansi mode), 1956 lines#60, use=cons25, 1957cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 1958 lines#60, use=cons25-m, 1959cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 1960 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 1961 use=cons25w, 1962cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 1963 colors@, pairs@, 1964 op@, rmul=\E[m, setab@, setaf@, 1965 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1966 smul=\E[4m, use=cons25r, 1967cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 1968 lines#50, use=cons25r, 1969cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 1970 lines#50, use=cons25r-m, 1971cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 1972 lines#60, use=cons25r, 1973cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 1974 lines#60, use=cons25r-m, 1975# ISO 8859-1 FreeBSD console 1976cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 1977 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 1978 use=cons25w, 1979cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 1980 colors@, pairs@, 1981 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1982 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1983 smul=\E[4m, use=cons25l1, 1984cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 1985 lines#50, use=cons25l1, 1986cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 1987 lines#50, use=cons25l1-m, 1988cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 1989 lines#60, use=cons25l1, 1990cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 1991 lines#60, use=cons25l1-m, 1992 1993#### 386BSD and BSD/OS Consoles 1994# 1995 1996# This was the original 386BSD console entry (I think). 1997# Some places it's named oldpc3|oldibmpc3. 1998# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> 1999origpc3|origibmpc3|IBM PC 386BSD Console, 2000 OTbs, am, bw, eo, xon, 2001 cols#80, lines#25, 2002 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 2003 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 2004 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 2005 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2006 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 2007 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 2008 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 2009 2010# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) 2011oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 2012 OTbs, km, 2013 lines#25, 2014 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, 2015 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2016 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 2017 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, 2018 2019# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 2020# Note, the emulator supports many of the additional console features 2021# listed in the iBCS2 (e.g. character-set selection) though not all 2022# are described here. This entry really ought to be upgraded. 2023# Also note, the console will also work with fewer lines after doing 2024# "stty rows NN", e.g. to use 24 lines. 2025# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 2026# Bug: The <op> capability resets attributes. 2027bsdos-pc|IBM PC BSD/OS Console, 2028 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 2029 use=bsdos-pc-nobold, 2030 2031bsdos-pc-nobold|BSD/OS PC console w/o bold, 2032 use=klone+color, use=bsdos-pc-m, 2033 2034bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 2035 OTbs, am, eo, km, xon, 2036 cols#80, it#8, lines#25, 2037 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, 2038 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2039 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2040 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 2041 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 2042 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 2043 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, 2044 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 2045 use=klone+sgr8, 2046 2047# Old names for BSD/OS PC console used in releases before 4.1. 2048pc3|BSD/OS on the PC Console, 2049 use=bsdos-pc-nobold, 2050ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, 2051 use=bsdos-pc, 2052 2053# BSD/OS on the SPARC 2054bsdos-sparc|Sun SPARC BSD/OS Console, 2055 use=sun, 2056 2057# BSD/OS on the PowerPC 2058bsdos-ppc|PowerPC BSD/OS Console, 2059 use=bsdos-pc, 2060 2061#### DEC VT52 2062# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) 2063# 2064# Actually (TD pointed this out at the time the acsc string was added): 2065# vt52 shouldn't define full acsc since most of the cells don't match. 2066# see vt100 manual page A-31. This is the list that does match: 2067# f degree 2068# g plus/minus 2069# h right-arrow 2070# k down-arrow 2071# m scan-1 2072# o scan-3 2073# q scan-5 2074# s scan-7 2075# The line-drawing happens to work in several terminal emulators, but should 2076# not be used as a guide to the capabilities of the vt52. Note in particular 2077# that vt52 does not support line-drawing characters (the scan-X values refer 2078# to a crude plotting feature) -TD 2079vt52|dec vt52, 2080 OTbs, 2081 cols#80, it#8, lines#24, 2082 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M, 2083 cub1=\ED, cud1=\EB, cuf1=\EC, 2084 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 2085 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 2086 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 2087 2088#### DEC VT100 and compatibles 2089# 2090# DEC terminals from the vt100 forward are collected here. Older DEC terminals 2091# and micro consoles can be found in the `obsolete' section. More details on 2092# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be 2093# found near the end of this file. 2094# 2095# Except where noted, these entries are DEC's official terminfos. 2096# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 2097# Engineering for more information. Updated terminfos and termcaps 2098# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 2099# 2100# In October 1995 DEC sold its terminals business, including the VT and Dorio 2101# line and trademark, to SunRiver Data Systems. SunRiver has since changed 2102# its name to Boundless Technologies; see http://www.boundless.com. 2103# 2104 2105# NOTE: Any VT100 emulation, whether in hardware or software, almost 2106# certainly includes what DEC called the `Level 1 editing extension' codes; 2107# only the very oldest VT100s lacked these and there probably aren't any of 2108# those left alive. To capture these, use one of the VT102 entries. 2109# 2110# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, 2111# since the cursor is left in a different position while in the 2112# weird state (concept at beginning of next line, vt100 at end 2113# of this line) so all versions of vi before 3.7 don't handle 2114# <xenl> right on vt100. The correct way to handle <xenl> is when 2115# you output the char in column 80, immediately output CR LF 2116# and then assume you are in column 1 of the next line. If <xenl> 2117# is on, am should be on too. 2118# 2119# I assume you have smooth scroll off or are at a slow enough baud 2120# rate that it doesn't matter (1200? or less). Also this assumes 2121# that you set auto-nl to "on", if you set it off use vt100-nam 2122# below. 2123# 2124# The padding requirements listed here are guesses. It is strongly 2125# recommended that xon/xoff be enabled, as this is assumed here. 2126# 2127# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 2128# tab settings are in non-volatile memory and don't need to be 2129# reset upon login. Also setting the number of columns glitches 2130# the screen annoyingly. You can type "reset" to get them set. 2131# 2132# The VT100 series terminals have cursor ("arrows") keys which can operate 2133# in two different modes: Cursor Mode and Application Mode. Cursor Mode 2134# is the reset state, and is assumed to be the normal state. Application 2135# Mode is the "set" state. In Cursor Mode, the cursor keys transmit 2136# "Esc [ {code}" sequences, conforming to ANSI standards. In Application 2137# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode 2138# was provided primarily as an aid to the porting of VT52 applications. It is 2139# assumed that the cursor keys are normally in Cursor Mode, and expected that 2140# applications such as vi will always transmit the <smkx> string. Therefore, 2141# the definitions for the cursor keys are made to match what the terminal 2142# transmits after the <smkx> string is transmitted. If the <smkx> string 2143# is a null string or is not defined, then cursor keys are assumed to be in 2144# "Cursor Mode", and the cursor keys definitions should match that assumption, 2145# else the application may fail. It is also expected that applications will 2146# always transmit the <rmkx> string to the terminal before they exit. 2147# 2148# The VT100 series terminals have an auxiliary keypad, commonly referred to as 2149# the "Numeric Keypad", because it is a cluster of numeric and function keys. 2150# The Numeric Keypad which can operate in two different modes: Numeric Mode and 2151# Application Mode. Numeric Mode is the reset state, and is assumed to be 2152# the normal state. Application Mode is the "set" state. In Numeric Mode, 2153# the numeric and punctuation keys transmit ASCII 7-bit characters, and the 2154# Enter key transmits the same as the Return key (Note: the Return key 2155# can be configured to send either LF (\015) or CR LF). In Application Mode, 2156# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys 2157# always send the same "Esc O {code}" sequences. It is assumed that the keypad 2158# is normally in Numeric Mode. If an application requires that the keypad be 2159# in Application Mode then it is expected that the user, or the application, 2160# will set the TERM environment variable to point to a terminfo entry which has 2161# defined the <smkx> string to include the codes that switch the keypad into 2162# Application Mode, and the terminfo entry will also define function key 2163# fields to match the Application Mode control codes. If the <smkx> string 2164# is a null string or is not defined, then the keypad is assumed to be in 2165# Numeric Mode. If the <smkx> string switches the keypad into Application 2166# Mode, it is expected that the <rmkx> string will contain the control codes 2167# necessary to reset the keypad to "Normal" mode, and it is also expected that 2168# applications which transmit the <smkx> string will also always transmit the 2169# <rmkx> string to the terminal before they exit. 2170# 2171# Here's a diagram of the VT100 keypad keys with their bindings. 2172# The top line is the name of the key (some DEC keyboards have the keys 2173# labelled somewhat differently, like GOLD instead of PF1, but this is 2174# the most "official" name). The second line is the escape sequence it 2175# generates in Application Keypad mode (where "$" means the ESC 2176# character). The third line contains two items, first the mapping of 2177# the key in terminfo, and then in termcap. 2178# _______________________________________ 2179# | PF1 | PF2 | PF3 | PF4 | 2180# | $OP | $OQ | $OR | $OS | 2181# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2182# | 7 8 9 - | 2183# | $Ow | $Ox | $Oy | $Om | 2184# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| 2185# | 4 | 5 | 6 | , | 2186# | $Ot | $Ou | $Ov | $Ol | 2187# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| 2188# | 1 | 2 | 3 | | 2189# | $Oq | $Or | $Os | enter | 2190# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | 2191# | 0 | . | | 2192# | $Op | $On | | 2193# |___kc1_______K4____|_kc3__K5_|_kent_@8_| 2194# 2195# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the 2196# terminfo guidelines. That is a compromise used to assign the remaining 2197# keys on the keypad to kf5-kf0, used on older systems with legacy termcap 2198# support: 2199vt100+keypad|dec vt100 numeric keypad no fkeys, 2200 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 2201vt100+pfkeys|dec vt100 numeric keypad, 2202 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2203 use=vt100+keypad, 2204vt100+fnkeys|dec vt100 numeric keypad, 2205 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 2206 kf9=\EOw, use=vt100+pfkeys, 2207# 2208# A better adaptation to modern keyboards such as the PC's, which have a dozen 2209# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to 2210# use the 5-key arrangement to model the arrow keys as suggested in the 2211# terminfo guidelines: 2212# _______________________________________ 2213# | PF1 | PF2 | PF3 | PF4 | 2214# | $OP | $OQ | $OR | $OS | 2215# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2216# | 7 8 9 - | 2217# | $Ow | $Ox | $Oy | $Om | 2218# |_ka1__K1_|_________|_ka3__K3_|_________| 2219# | 4 | 5 | 6 | , | 2220# | $Ot | $Ou | $Ov | $Ol | 2221# |_________|_kb2__K2_|_________|_________| 2222# | 1 | 2 | 3 | | 2223# | $Oq | $Or | $Os | enter | 2224# |_kc1__K4_|_________|_kc3__K5_| $OM | 2225# | 0 | . | | 2226# | $Op | $On | | 2227# |___________________|_________|_kent_@8_| 2228# 2229vt220+keypad|dec vt220 numeric keypad, 2230 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 2231 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, 2232 kb3=\EOv, kc2=\EOr, 2233# 2234vt100+enq|ncurses extension for vt100-style ENQ, 2235 u8=\E[?1;2c, use=ansi+enq, 2236vt102+enq|ncurses extension for vt102-style ENQ, 2237 u8=\E[?6c, use=ansi+enq, 2238# 2239# And here, for those of you with orphaned VT100s lacking documentation, is 2240# a description of the soft switches invoked when you do `Set Up'. 2241# 2242# Scroll 0-Jump Shifted 3 0-# 2243# | 1-Smooth | 1-British pound sign 2244# | Autorepeat 0-Off | Wrap Around 0-Off 2245# | | 1-On | | 1-On 2246# | | Screen 0-Dark Bkg | | New Line 0-Off 2247# | | | 1-Light Bkg | | | 1-On 2248# | | | Cursor 0-Underline | | | Interlace 0-Off 2249# | | | | 1-Block | | | | 1-On 2250# | | | | | | | | 2251# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings 2252# | | | | | | | | 2253# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz 2254# | | | 1-On | | | 1-50 Hz 2255# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits 2256# | | 1-ANSI | | 1-8 Bits 2257# | Keyclick 0-Off | Parity 0-Off 2258# | 1-On | 1-On 2259# Margin Bell 0-Off Parity Sense 0-Odd 2260# 1-On 1-Even 2261# 2262# The following SET-UP modes are assumed for normal operation: 2263# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS 2264# WRAP_AROUND_ON JUMP_SCROLL_OFF 2265# Other SET-UP modes may be set for operator convenience or communication 2266# requirements; I recommend 2267# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# 2268# Unless you have a graphics add-on such as Digital Engineering's VT640 2269# (and even then, whenever it can be arranged!) you should set 2270# INTERLACE_OFF 2271# 2272# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) 2273vt100|vt100-am|dec vt100 (w/advanced video), 2274 OTbs, am, mc5i, msgr, xenl, xon, 2275 cols#80, it#8, lines#24, vt#3, 2276 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2277 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2278 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2279 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2280 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2281 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2282 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2283 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 2284 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, 2285 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 2286 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 2287 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 2288 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2289 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 2290 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 2291 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 2292 use=vt100+fnkeys, 2293vt100nam|vt100-nam|vt100 no automargins, 2294 am@, xenl@, use=vt100-am, 2295vt100-vb|dec vt100 (w/advanced video) & no beep, 2296 bel@, flash=\E[?5h\E[?5l, use=vt100, 2297 2298# Ordinary vt100 in 132 column ("wide") mode. 2299vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), 2300 cols#132, lines#24, 2301 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 2302vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), 2303 cols#132, lines#14, vt@, 2304 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 2305 2306# vt100 with no advanced video. 2307vt100-nav|vt100 without advanced video option, 2308 xmc#1, 2309 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 2310 smul@, use=vt100, 2311vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), 2312 cols#132, lines#14, use=vt100-nav, 2313 2314# vt100 with one of the 24 lines used as a status line. 2315# We put the status line on the top. 2316vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, 2317 eslok, hs, 2318 lines#23, 2319 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 2320 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 2321 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 2322 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 2323 2324# Status line at bottom. 2325# Clearing the screen will clobber status line. 2326vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, 2327 eslok, hs, 2328 lines#23, 2329 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 2330 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 2331 2332# Most of the `vt100' emulators out there actually emulate a vt102 2333# This entry (or vt102-nsgr) is probably the right thing to use for 2334# these. 2335vt102|dec vt102, 2336 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 2337 use=vt100, 2338vt102-w|dec vt102 in wide mode, 2339 cols#132, 2340 rs3=\E[?3h, use=vt102, 2341 2342# Many brain-dead PC comm programs that pretend to be `vt100-compatible' 2343# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> 2344# string in the canonical vt100 entry above leaves the screen littered 2345# with little snowflake or star characters (IBM PC ROM character \017 = ^O) 2346# after highlight turnoffs. This entry should fix that, and even leave 2347# ACS support working, at the cost of making multiple-highlight changes 2348# slightly more expensive. 2349# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 2350vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), 2351 sgr@, sgr0=\E[m, use=vt102, 2352 2353# VT125 Graphics CRT. Clear screen also erases graphics 2354# Some vt125's came configured with vt102 support. 2355vt125|vt125 graphics terminal, 2356 mir, 2357 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 2358 2359# This isn't a DEC entry, it came from University of Wisconsin. 2360# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) 2361vt131|dec vt131, 2362 OTbs, am, xenl, 2363 cols#80, it#8, lines#24, vt#3, 2364 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 2365 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2366 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 2367 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 2368 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 2369 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 2370 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 2371 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 2372 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 2373 rmul=\E[m$<2/>, 2374 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2375 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 2376 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 2377 2378# vt132 - like vt100 but slower and has ins/del line and such. 2379# I'm told that <smir>/<rmir> are backwards in the terminal from the 2380# manual and from the ANSI standard, this describes the actual 2381# terminal. I've never actually used a vt132 myself, so this 2382# is untested. 2383# 2384vt132|DEC vt132, 2385 xenl, 2386 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 2387 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 2388 2389# This vt220 description maps F5--F9 to the second block of function keys 2390# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict 2391# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. 2392# PF1--PF4 are used as F1--F4. 2393# 2394vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, 2395 OTbs, OTpt, am, mir, xenl, xon, 2396 cols#80, lines#24, vt#3, 2397 OTnl=^J, 2398 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2399 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 2400 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 2401 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 2402 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2403 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2404 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 2405 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2406 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, 2407 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 2408 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 2409 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, 2410 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, 2411 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2412 rmso=\E[27m, rmul=\E[24m, 2413 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2414 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2415 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2416 smso=\E[7m, smul=\E[4m, 2417 2418# A much better description of the VT200/220; used to be vt220-8 2419# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 2420# designation to accommodate bug in pcvt -TD 2421vt220|vt200|dec vt220, 2422 OTbs, am, mc5i, mir, msgr, xenl, xon, 2423 cols#80, it#8, lines#24, vt#3, 2424 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2425 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 2426 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2427 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2428 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2429 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2430 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 2431 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 2432 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 2433 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2434 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, 2435 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, 2436 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 2437 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 2438 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 2439 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 2440 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 2441 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, 2442 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 2443 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 2444 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2445 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2446 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2447 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2448vt220-w|vt200-w|DEC vt220 in wide mode, 2449 cols#132, 2450 rs3=\E[?3h, use=vt220, 2451vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, 2452 OTbs, am, mc5i, mir, msgr, xenl, xon, 2453 cols#80, it#8, lines#24, vt#3, 2454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2455 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, 2456 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 2457 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 2458 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 2459 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 2460 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 2461 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 2462 ich=\233%p1%d@, if=/usr/share/tabset/vt100, 2463 il=\233%p1%dL, il1=\233L, ind=\ED, 2464 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, 2465 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 2466 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 2467 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, 2468 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, 2469 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, 2470 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, 2471 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, 2472 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, 2473 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B, 2474 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m, 2475 rs1=\233?3l, sc=\E7, 2476 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2477 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, 2478 smso=\2337m, smul=\2334m, tbc=\2333g, 2479 2480# vt220d: 2481# This vt220 description regards F6--F10 as the second block of function keys 2482# at the top of the keyboard. This mapping follows the description given 2483# in the VT220 Programmer Reference Manual and agrees with the labeling 2484# on some terminals that emulate the vt220. There is no support for an F5. 2485# See vt220 for an alternate mapping. 2486# 2487vt220d|DEC VT220 in vt100 mode with DEC function key labeling, 2488 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2489 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 2490 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 2491 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 2492 2493vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, 2494 am@, 2495 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2496 2497# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko 2498# (not an official DEC entry!) 2499# The problem with real vt220 terminals is they don't send escapes when in 2500# in vt220 mode. This can be gotten around two ways. 1> don't send 2501# escapes or 2> put the vt220 into vt100 mode and use all the nifty 2502# features of vt100 advanced video which it then has. 2503# 2504# This entry takes the view of putting a vt220 into vt100 mode so 2505# you can use the escape key in emacs and everything else which needs it. 2506# 2507# You probably don't want to use this on a VMS machine since VMS will think 2508# it has a vt220 and will get fouled up coming out of emacs 2509# 2510# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 2511# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) 2512vt200-js|vt220-js|dec vt200 series with jump scroll, 2513 am, 2514 cols#80, 2515 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2516 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2517 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 2518 ht=^I, il1=\E[L, ind=\ED, 2519 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 2520 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2521 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, 2522 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 2523 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 2524 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 2525 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 2526 2527# This was DEC's vt320. Use the purpose-built one below instead 2528#vt320|DEC VT320 in vt100 emulation mode, 2529# use=vt220, 2530 2531# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. 2532# 2533vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, 2534 am@, 2535 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2536 2537# These entries are not DEC's official ones, they were purpose-built for the 2538# VT320. Here are the designer's notes: 2539# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to 2540# 'Erase to End of Field'... since nothing seems to use 'end' anyways... 2541# khome is Home on a PC kbd. Actually 'FIND' on a VT. 2542# Things that use <knxt> usually use tab anyways... and things that don't use 2543# tab usually use <knxt> instead... 2544# kprv is same as tab - Backtab is useless... 2545# I left out <sgr> because of its RIDICULOUS complexity, 2546# and the resulting fact that it causes the termcap translation of the entry 2547# to SMASH the 1k-barrier... 2548# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2549# (vt320: uncommented <fsl> --esr) 2550vt320|vt300|dec vt320 7 bit terminal, 2551 am, eslok, hs, mir, msgr, xenl, 2552 cols#80, lines#24, wsl#80, 2553 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2554 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2555 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 2556 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2557 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2558 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2559 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2560 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, 2561 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2562 il1=\E[L, ind=\ED, 2563 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2564 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2565 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 2566 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2567 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2568 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2569 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 2570 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, 2571 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, 2572 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2573 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 2574 rmul=\E[m, 2575 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2576 sc=\E7, 2577 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2578 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2579 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2580 tsl=\E[1$}\E[H\E[K, use=vt220+keypad, 2581vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, 2582 am@, 2583 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2584 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2585 use=vt320, 2586# We have to init 132-col mode, not 80-col mode. 2587vt320-w|vt300-w|dec vt320 wide 7 bit terminal, 2588 cols#132, wsl#132, 2589 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2590 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2591 use=vt320, 2592vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, 2593 am@, 2594 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2595 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2596 use=vt320-w, 2597 2598# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals 2599# which are pretty much a superset of the VT320. They have the 2600# host writable status line, yet another different DRCS matrix size, 2601# and such, but they add the DEC Technical character set, Multiple text 2602# pages, selectable length pages, and the like. The difference between 2603# the vt330 and vt340 is that the latter has only 2 planes and a monochrome 2604# monitor, the former has 4 planes and a color monitor. These terminals 2605# support VT131 and ANSI block mode, but as with much of these things, 2606# termcap/terminfo doesn't deal with these features. 2607# 2608# Note that this entry is are set up in what was the standard way for GNU 2609# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2610# keys were switched into application mode at the same time the numeric pad 2611# is switched into application mode. This changes the definitions of the 2612# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2613# your termcap or terminfo entry, 2614# 2615# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2616# (vt340: string capability "sb=\E[M" corrected to "sr"; 2617# also, added <rmam>/<smam> based on the init string -- esr) 2618vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 2619 am, eslok, hs, mir, msgr, xenl, xon, 2620 cols#80, it#8, lines#24, vt#3, 2621 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2622 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2623 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2624 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2625 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2626 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 2627 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, 2628 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2629 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2630 il1=\E[L, ind=\ED, 2631 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2632 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2633 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2634 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2635 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2636 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2637 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2638 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2639 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2640 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2641 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2642 tsl=\E[2$~\E[1$}\E[1;%dH, 2643 2644# DEC doesn't supply a vt400 description, so we add Daniel Glasser's 2645# (originally written with vt420 as its primary name, and usable for it). 2646# 2647# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple 2648# text pages and long text pages with selectable length of the vt340, along 2649# with left and right margins, rectangular area text copy, fill, and erase 2650# operations, selected region character attribute change operations, 2651# page memory and rectangle checksums, insert/delete column, reception 2652# macros, and other features too numerous to remember right now. TERMCAP 2653# can only take advantage of a few of these added features. 2654# 2655# Note that this entry is are set up in what was the standard way for GNU 2656# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2657# keys were switched into application mode at the same time the numeric pad 2658# is switched into application mode. This changes the definitions of the 2659# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2660# your termcap entry, 2661# 2662# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2663# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; 2664# also, added <rmam>/<smam> based on the init string -- esr) 2665vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 2666 am, eslok, hs, mir, msgr, xenl, xon, 2667 cols#80, it#8, lines#24, vt#3, 2668 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2669 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2670 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 2671 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2672 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2673 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2674 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2675 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 2676 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2677 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 2678 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2679 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2680 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2681 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2682 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2683 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2684 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2685 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2686 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, 2687 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2688 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2689 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2690 tsl=\E[2$~\E[1$}\E[1;%dH, 2691 2692# (vt420: I removed <kf0>, it collided with <kf10>. I also restored 2693# a missing <sc> -- esr) 2694vt420|DEC VT420, 2695 am, mir, xenl, xon, 2696 cols#80, lines#24, vt#3, 2697 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2698 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2699 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2700 cub1=^H, cud1=\E[B, cuf1=\E[C, 2701 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2702 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2703 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2704 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2705 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2706 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2707 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2708 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2709 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, 2710 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, 2711 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 2712 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2713 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2714 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2715 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2716 smkx=\E=, smso=\E[7m, smul=\E[4m, 2717 2718# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) 2719# takes two parameters, the key and the string. Translating the key is 2720# straightforward (keys 1-5 are not defined on real terminals, though some 2721# emulators define these): 2722# 2723# if (key < 16) then value = key; 2724# else if (key < 21) then value = key + 1; 2725# else if (key < 25) then value = key + 2; 2726# else if (key < 27) then value = key + 3; 2727# else if (key < 30) then value = key + 4; 2728# else value = key + 5; 2729# 2730# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 2731# There's no provision in terminfo for emitting a string in this format, so the 2732# application has to know it. 2733# 2734vt420pc|DEC VT420 w/PC keyboard, 2735 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, 2736 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, 2737 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, 2738 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, 2739 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, 2740 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, 2741 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, 2742 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, 2743 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, 2744 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, 2745 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, 2746 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, 2747 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2748 kf8=\E[19~, kf9=\E[20~, khome=\E[H, 2749 pctrm=USR_TERM\:vt420pcdos\:, 2750 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2751 use=vt420, 2752 2753vt420pcdos|DEC VT420 w/PC for DOS Merge, 2754 lines#25, 2755 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, 2756 pctrm@, 2757 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 2758 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 2759 2760vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 2761 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 2762 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2763 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2764 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 2765 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2766 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 2767 use=vt420, 2768 2769vt510|DEC VT510, 2770 use=vt420, 2771vt510pc|DEC VT510 w/PC keyboard, 2772 use=vt420pc, 2773vt510pcdos|DEC VT510 w/PC for DOS Merge, 2774 use=vt420pcdos, 2775 2776# VT520/VT525 2777# 2778# The VT520 is a monochrome text terminal capable of managing up to 2779# four independent sessions in the terminal. It has multiple ANSI 2780# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) 2781# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, 2782# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. 2783# 2784# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or 2785# [Alt]/[Print Screen] depending upon which keyboard and which 2786# terminal mode is being used. If Set-Up has been disabled or 2787# assigned to an unknown key, Set-Up may be entered by pressing 2788# [F3] as the first key after power up, regardless of keyboard type. 2789# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr) 2790vt520|DEC VT520, 2791 am, mir, xenl, xon, 2792 cols#80, lines#24, vt#3, 2793 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2794 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2795 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2796 cub1=^H, cud1=\E[B, cuf1=\E[C, 2797 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2798 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2799 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2800 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2801 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2802 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2803 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2804 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2805 kslt=\E[4~, 2806 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2807 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2808 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2809 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2810 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2811 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2812 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2813 smso=\E[7m, smul=\E[4m, 2814 2815# (vt525: I added <rmam>/<smam> based on the init string; 2816# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr) 2817vt525|DEC VT525, 2818 am, mir, xenl, xon, 2819 cols#80, lines#24, vt#3, 2820 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2821 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2822 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2823 cub1=^H, cud1=\E[B, cuf1=\E[C, 2824 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2825 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2826 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2827 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2828 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2829 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2830 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2831 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2832 kslt=\E[4~, 2833 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2834 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2835 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2836 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2837 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2838 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2839 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2840 smso=\E[7m, smul=\E[4m, 2841 2842#### VT100 emulations 2843# 2844 2845# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows 2846# (the best Windows telnet as of September 1995) presents the name `dec-vt100' 2847# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us 2848# that this works best with a stock vt100 entry. 2849dec-vt100|EWAN telnet's vt100 emulation, 2850 use=vt100, 2851 2852# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 2853dec-vt220|DOS tnvt200 terminal emulator, 2854 am@, use=vt220, 2855 2856# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to 2857# anyone who needs PC VT340 emulation. (or anything below that level, for 2858# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's 2859# RDBM systems, it includes ReGIS and SiXel support! I'm impressed... 2860# I can send the address if requested. 2861# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) 2862# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2863z340|zstem vt340 terminal emulator 132col 42line, 2864 lines#42, 2865 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2866 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2867 use=vt320-w, 2868z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), 2869 am@, 2870 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2871 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2872 use=z340, 2873 2874# CRT is shareware. It implements some xterm features, including mouse. 2875crt|crt-vt220|CRT 2.3 emulating VT220, 2876 bce, msgr, 2877 ncv@, 2878 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, 2879 2880# PuTTY 0.55 (released 3 August 2004) 2881# http://www.chiark.greenend.org.uk/~sgtatham/putty/ 2882# 2883# Comparing with 0.51, vttest is much better (only a few problems with the 2884# cursor position reports and wrapping). 2885# 2886# PuTTY 0.51 (released 14 December 2000) 2887# 2888# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as 2889# well as SCO and Atari, color palettes from Linux console). Reading the code, 2890# it is intended to be VT102 plus selected features. By default, it sets $TERM 2891# to xterm, which is incorrect, since several features are misimplemented: 2892# 2893# Alt+key always sends ESC+key, so 'km' capability is removed. 2894# 2895# Control responses, wrapping and tabs are buggy, failing a couple of 2896# screens in vttest. 2897# 2898# xterm mouse support is not implemented (unrelease version may). 2899# 2900# Several features such as backspace/delete are optional; this entry documents 2901# the default behavior -TD 2902 2903putty|PuTTY terminal emulator, 2904 am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT, 2905 colors#8, it#8, ncv#22, pairs#64, U8#1, 2906 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2907 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 2908 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 2909 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2910 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 2911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 2912 dch=\E[%p1%dP, dch1=\E[P, 2913 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, 2914 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX, 2915 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 2916 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, 2917 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 2918 indn=\E[%p1%dS, 2919 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 2920 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, 2921 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 2922 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, 2923 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 2924 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 2925 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 2926 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 2927 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2928 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 2929 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, 2930 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, 2931 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, 2932 rmso=\E[27m, rmul=\E[24m, 2933 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, 2934 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, 2935 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 2936 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 2937 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, 2938 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 2939 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq, 2940vt100-putty|Reset PuTTY to pure vt100, 2941 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, 2942 use=vt100, 2943# palette is hardcoded... 2944putty-256color|PuTTY 0.58 with xterm 256-colors, 2945 initc@, use=xterm+256color, use=putty, 2946 2947# One of the keyboard selections is "VT100+". 2948# pterm (the X11 port) uses shifted F1-F10 as F11-F20 2949putty-vt100|VT100+ keyboard layout, 2950 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, 2951 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 2952 kf9=\EOX, use=putty, 2953 2954# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by 2955# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator 2956# (communication program) which supports: 2957# 2958# - Serial port connections. 2959# - TCP/IP (telnet) connections. 2960# - VT100 emulation, and selected VT200/300 emulation. 2961# - TEK4010 emulation. 2962# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and 2963# Quick-VAN). 2964# - Scripts using the "Tera Term Language". 2965# - Japanese and Russian character sets. 2966# 2967# The program does not come with terminfo or termcap entries. However, the 2968# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no 2969# vt52 or doublesize character support; blinking is done with color). Besides 2970# the HPA, VPA extensions it also implements CPL and CNL. 2971# 2972# All of the function keys can be remapped. This description shows the default 2973# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys 2974# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad 2975# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, 2976# kfnd Insert 2977# kslt Delete 2978# kich1 Home 2979# kdch1 PageUp 2980# kpp End 2981# knp PageDown 2982# 2983# ANSI colors are implemented, but cannot be combined with video attributes 2984# except for reverse. 2985# 2986# No fonts are supplied with the program, so the acsc string is chosen to 2987# correspond with the default Microsoft terminal font. 2988# 2989# Tera Term recognizes some xterm sequences, including those for setting and 2990# retrieving the window title, and for setting the window size (i.e., using 2991# "resize -s"), though it does not pass SIGWINCH to the application if the 2992# user resizes the window with the mouse. 2993teraterm2.3|Tera Term Pro, 2994 km, xon@, 2995 ncv#43, vt@, 2996 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 2997 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2998 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2999 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3000 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3001 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, 3002 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, 3003 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 3004 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 3005 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 3006 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3007 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 3008 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, 3009 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, 3010 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, 3011 use=klone+color, use=vt100, 3012 3013# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary 3014# to choose a Windows OEM font). 3015# 3016# Testing with tack: 3017# - it does not have xenl (suppress that) 3018# - underline seems to work with color (modify ncv). 3019# Testing with vttest: 3020# - wrapping differs from vt100 (menu 1). 3021# - it recognizes xterm's X10 and normal mouse tracking, but none of the 3022# other flavors. 3023# - it recognizes the dtterm window controls for reporting size in 3024# characters and pixels. 3025# - it passes SIGWINCH. 3026teraterm4.59|Tera Term Pro, 3027 bce, xenl@, 3028 ncv#41, 3029 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3030 kmous=\E[M, use=teraterm2.3, 3031 3032teraterm|Tera Term, 3033 use=teraterm4.59, 3034 3035# Tested with WinNT 4.0, the telnet application assumes the screensize is 3036# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. 3037# 3038# Other notes: 3039# a) Fails tack's cup (cursor-addressing) test, though cup works well enough 3040# for casual (occasional) use. Also fails several of the vttest screens, 3041# but that is not unusual for vt100 "emulators". 3042# b) Does not implement vt100 keypad 3043# c) Recognizes a subset of vt52 controls. 3044ms-vt100|MS telnet imitating dec vt100, 3045 lines#25, 3046 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 3047 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 3048 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, 3049 3050# Tested with Windows 2000, the telnet application runs in a console window, 3051# also using 'Terminal' font. 3052# 3053# Other notes: 3054# a) This version has no function keys or numeric keypad. Unlike the older 3055# version, the numeric keypad is entirely ignored. 3056# b) The program sets $TERM to "ansi", which of course is inaccurate. 3057ms-vt100-color|vtnt|windows 2000 ansi (sic), 3058 bce, 3059 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 3060 use=ms-vt100, 3061 3062# Based on comments from Federico Bianchi: 3063# 3064# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different 3065# scheme for PF keys. 3066# 3067# and PuTTY wishlist: 3068# 3069# The modifiers are represented as the codes listed above, prefixed to 3070# the normal sequences. If the modifier is pressed alone, its sequence 3071# is transmitted twice in succession. If multiple modifiers apply, 3072# they're transmitted in the order shift, control, alt. 3073# 3074# Shift \E^S 3075# Alt \E^A, 3076# Ctrl \E^C, 3077ms-vt100+|vt100+|windows XP vt100+ (sic), 3078 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 3079 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 3080 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 3081 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 3082 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 3083 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 3084 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 3085 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 3086 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 3087 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 3088 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 3089 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 3090 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 3091 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 3092 knp=\E/, kpp=\E?, use=ms-vt100-color, 3093 3094ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, 3095 use=ms-vt100+, 3096 3097# expect-5.44.1.15/example/tkterm 3098# a minimal subset of a vt100 (compare with "news-unk). 3099# 3100# The missing "=" in smkx is not a typo (here), but an error in tkterm. 3101tt|tkterm|Don Libes' tk text widget terminal emulator, 3102 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 3103 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, 3104 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 3105 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, 3106 smso=\E[7m, 3107 3108######## X TERMINAL EMULATORS 3109#### XTERM 3110# 3111# You can add the following line to your .Xdefaults to change the terminal type 3112# set by the xterms you start up to my-xterm: 3113# 3114# *termName: my-xterm 3115# 3116# System administrators can change the default entry for xterm instances 3117# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either 3118# case, xterm will detect and reject an invalid terminal type, falling back 3119# to the default of xterm. 3120# 3121 3122# X10/6.6 11/7/86, minus alternate screen, plus (csr) 3123# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; 3124# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) 3125# as these seem not to work -- esr) 3126x10term|vs100-x10|xterm terminal emulator (X10 window system), 3127 OTbs, am, km, mir, msgr, xenl, xon, 3128 cols#80, it#8, lines#65, 3129 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 3130 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3131 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3132 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 3133 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 3134 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 3135 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 3136 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3137 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 3138 smso=\E[7m, smul=\E[4m, 3139# Compatible with the R5 xterm 3140# (from the XFree86 3.2 distribution, <blink=@> removed) 3141# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD 3142# corrected typos in rs2 string - TD 3143# added u6-u9 -TD 3144xterm-r5|xterm R5 version, 3145 OTbs, am, km, msgr, xenl, 3146 cols#80, it#8, lines#24, 3147 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3148 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3149 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3150 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3151 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3152 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3153 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3154 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 3155 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, 3156 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3157 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3158 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 3159 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, 3160 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 3161 rmul=\E[m, 3162 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 3163 sc=\E7, 3164 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 3165 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 3166 smul=\E[4m, tbc=\E[3g, use=vt100+enq, 3167# Compatible with the R6 xterm 3168# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) 3169# added khome/kend, hts based on the R6 xterm code - TD 3170# (khome/kend do not actually work in X11R5 or X11R6, but many people use this 3171# for compatibility with other emulators). 3172xterm-r6|xterm-old|xterm X11R6 version, 3173 OTbs, am, km, mir, msgr, xenl, 3174 cols#80, it#8, lines#24, 3175 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3176 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3180 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3181 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 3182 il1=\E[L, ind=^J, 3183 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H, 3184 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3185 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3186 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3187 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3188 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 3189 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3190 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3191 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, 3192 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 3193 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3194 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, 3195 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 3196 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3197 use=vt100+enq, 3198# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. 3199# The name has been changed and some aliases have been removed. 3200xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 3201 OTbs, am, bce, km, mir, msgr, xenl, 3202 cols#80, it#8, lines#24, ncv@, 3203 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3204 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3205 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3206 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3207 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3208 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3209 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3210 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 3211 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3212 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 3213 il1=\E[L, ind=^J, 3214 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 3215 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 3216 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, 3217 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 3218 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 3219 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 3220 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 3221 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 3222 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 3223 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 3224 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 3225 rmso=\E[27m, rmul=\E[24m, rs1=^O, 3226 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 3227 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3228 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3229 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3230 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 3231 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 3232 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3233 use=ecma+color, use=vt220+keypad, 3234 3235# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 3236# codes for F1-F4 except while in VT220 mode. 3237xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 3238 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 3239 3240# This version was released in XFree86 3.3.3 (November 1998). 3241# Besides providing printer support, it exploits a new feature that allows 3242# xterm to use terminfo-based descriptions with the titeInhibit resource. 3243# -- the distribution contained incorrect khome/kend values -TD 3244xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 3245 mc5i, 3246 blink=\E[5m, ich1@, invis=\E[8m, 3247 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 3248 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, 3249 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, 3250 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3251 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, 3252 3253# This version was released in XFree86 4.0. 3254xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 3255 npc, 3256 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 3257 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 3258 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, 3259 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3260 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 3261 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3262 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3263 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, 3264 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, 3265 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, 3266 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, 3267 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, 3268 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, 3269 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, 3270 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3271 smcup=\E[?1049h, use=xterm-xf86-v333, 3272 3273# This version was released in XFree86 4.3. 3274xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 3275 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 3276 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 3277 kbeg@, 3278 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3279 use=xterm-xf86-v40, 3280 3281# This version was released in XFree86 4.4. 3282xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), 3283 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, 3284 rin=\E[%p1%dT, use=xterm-xf86-v43, 3285 3286xterm-xfree86|xterm terminal emulator (XFree86), 3287 use=xterm-xf86-v44, 3288 3289# This version reflects the current xterm features. 3290xterm-new|modern xterm terminal emulator, 3291 npc, 3292 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM, 3293 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux, 3294 use=xterm-basic, 3295# 3296# This fragment describes as much of XFree86 xterm's "pc-style" function 3297# keys as will fit into terminfo's 60 function keys. 3298# From ctlseqs.ms: 3299# Code Modifiers 3300# --------------------------------- 3301# 2 Shift 3302# 3 Alt 3303# 4 Shift + Alt 3304# 5 Control 3305# 6 Shift + Control 3306# 7 Alt + Control 3307# 8 Shift + Alt + Control 3308# --------------------------------- 3309# The meta key may also be used as a modifier in this scheme, adding another 3310# bit to the parameter. 3311xterm+pcfkeys|fragment for PC-style fkeys, 3312 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, 3313 use=xterm+pce2, 3314# 3315xterm+noapp|fragment with cursor keys in normal mode, 3316 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, 3317 khome=\E[H, 3318 3319xterm+app|fragment with cursor keys in application mode, 3320 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, 3321 khome=\EOH, 3322# 3323# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) 3324# and revised in patch #167 (2002/8/24). Some other terminal emulators copied 3325# the earlier scheme, as noted in the "use=" clauses in this file. 3326# 3327# The original assignments from patch #94 for cursor-keys had some technical 3328# issues: 3329# 3330# A parameter for a function-key to represent a modifier is just more 3331# bits. But for a cursor-key it may change the behavior of the 3332# application. For instance, emacs decodes the first parameter of a 3333# cursor-key as a repeat count. 3334# 3335# A parameterized string should (really) not begin with SS3 (\EO). 3336# Rather, CSI (\E[) should be used. 3337# 3338# For these reasons, the original assignments were deprecated. For 3339# compatibility reasons, they are still available as a setting of xterm's 3340# modifyCursorKeys resource. These fragments list the modified cursor-keys 3341# that might apply to xterm+pcfkeys with different values of that resource. 3342xterm+pcc3|fragment with modifyCursorKeys:3, 3343 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, 3344 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, 3345 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, 3346 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, 3347 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, 3348 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, 3349 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, 3350 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, 3351 kUP7=\E[>1;7A, 3352 3353xterm+pcc2|fragment with modifyCursorKeys:2, 3354 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, 3355 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, 3356 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, 3357 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, 3358 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, 3359 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, 3360 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, 3361 3362xterm+pcc1|fragment with modifyCursorKeys:1, 3363 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, 3364 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, 3365 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, 3366 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, 3367 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, 3368 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, 3369 3370xterm+pcc0|fragment with modifyCursorKeys:0, 3371 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, 3372 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, 3373 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, 3374 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, 3375 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, 3376 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, 3377 3378# 3379# Here are corresponding fragments from xterm patch #216: 3380# 3381xterm+pcf0|fragment with modifyFunctionKeys:0, 3382 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3383 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3384 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3385 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3386 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3387 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, 3388 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3389 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3390 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 3391 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 3392 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3393 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, 3394 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, 3395 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 3396 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 3397 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, 3398 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3399# 3400xterm+pcf2|fragment with modifyFunctionKeys:2, 3401 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3402 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, 3403 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3404 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3405 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, 3406 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, 3407 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3408 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3409 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, 3410 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, 3411 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3412 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, 3413 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, 3414 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, 3415 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, 3416 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, 3417 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, 3418 kf8=\E[19~, kf9=\E[20~, 3419# 3420# Chunks from xterm #230: 3421xterm+pce2|fragment with modifyCursorKeys:2, 3422 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 3423 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~, 3424 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, 3425 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, 3426 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, 3427 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, 3428 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, 3429 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, 3430 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, 3431 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, 3432 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, 3433 use=xterm+edit, 3434 3435xterm+edit|fragment for 6-key editing-keypad, 3436 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 3437 use=xterm+pc+edit, 3438 3439xterm+pc+edit|fragment for pc-style editing keypad, 3440 kend=\E[4~, khome=\E[1~, 3441 3442xterm+vt+edit|fragment for vt220-style editing keypad, 3443 kfnd=\E[1~, kslt=\E[4~, 3444 3445# 3446# Those chunks use the new-style (the xterm oldFunctionKeys resource is false). 3447# Alternatively, the same scheme with old-style function keys as in xterm-r6 3448# is shown here (because that is used in mrxvt and mlterm): 3449xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, 3450 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, 3451 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, 3452 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, 3453 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, 3454 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, 3455 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, 3456 kf63=\E[13;4~, use=xterm+pcf2, 3457# 3458# This chunk is used for building the VT220/Sun/PC keyboard variants. 3459xterm-basic|modern xterm terminal emulator - common, 3460 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, 3461 colors#8, cols#80, it#8, lines#24, pairs#64, 3462 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3463 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3464 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, 3465 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3466 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3467 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3468 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3469 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3470 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3471 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 3472 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H, 3473 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, 3474 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 3475 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, 3476 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, 3477 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, 3478 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3479 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3480 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3481 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 3482 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 3483 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, 3484 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3485 3486# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997 3487# In retrospect, something like xterm-r6 was intended here -TD 3488xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 3489 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 3490 3491# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) 3492# If configured to support 88- or 256-colors (which is fairly common in 2009), 3493# xterm also recognizes the control sequences for initc -TD 3494xterm-16color|xterm with 16 colors like aixterm, 3495 ccc, 3496 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 3497 use=ibm+16color, use=xterm-new, 3498 3499# 256-colors is a compile-time feature of XFree86 xterm beginning with 3500# patch #111 (1999/7/10) -TD 3501xterm+256color|xterm 256-color feature, 3502 ccc, 3503 colors#256, pairs#32767, 3504 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 3505 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, 3506 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, 3507 setb@, setf@, 3508 3509# 88-colors is a compile-time feature of XFree86 xterm beginning with 3510# patch #115 (1999/9/18) -TD 3511# 3512# Note that the escape sequences used are the same as for 256-colors - xterm 3513# has a different table of default color resource values. If built for 3514# 256-colors, it can still handle an 88-color palette by using the initc 3515# capability. 3516# 3517# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals 3518# which support the xterm+256color feature support the associated initc 3519# capability. So it is cancelled in the entries which use this and/or the 3520# xterm+256color block. 3521# 3522# The default color palette for the 256- and 88-colors are different. A 3523# given executable will have one palette (perhaps compiled-in). If the program 3524# supports xterm's control sequence, it can be programmed using initc. 3525xterm+88color|xterm 88-color feature, 3526 colors#88, pairs#7744, use=xterm+256color, 3527 3528# These variants of XFree86 3.9.16 xterm are built as a configure option. 3529xterm-256color|xterm with 256 colors, 3530 use=xterm+256color, use=xterm-new, 3531xterm-88color|xterm with 88 colors, 3532 use=xterm+88color, use=xterm-256color, 3533 3534# These two are used to demonstrate the any-event mouse support, i.e., by 3535# using an extended name "XM" which tells ncurses to put the terminal into 3536# a special mode when initializing the xterm mouse. 3537xterm-1002|testing xterm-mouse, 3538 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, 3539xterm-1003|testing xterm-mouse, 3540 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, 3541 3542# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who 3543# asked for some of xterm's advanced features to be added to its terminfo 3544# entry. It defines extended capabilities not found in standard terminfo or 3545# termcap. These are useful in tmux, for instance, hence the name. 3546# 3547# One caveat in adding extended capabilities in ncurses is that if the names 3548# are longer than two characters, then they will not be visible through the 3549# termcap interface. 3550# 3551# Ms modifies the selection/clipboard. Its parameters are 3552# p1 = the storage unit (clipboard, selection or cut buffer) 3553# p2 = the base64-encoded clipboard content. 3554# 3555# Ss is used to set the cursor style as described by the DECSCUSR 3556# function to a block or underline. 3557# Se resets the cursor style to the terminal power-on default. 3558# 3559# Cs and Ce set and reset the cursor colour. 3560xterm+tmux|advanced xterm features used in tmux, 3561 Cr=\E]112\007, Cs=\E]12;%p1%s\007, 3562 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, 3563 3564# This is another variant, for XFree86 4.0 xterm (T.Dickey) 3565# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. 3566# To use it, your decTerminalID resource must be set to 200 or above. 3567# 3568# HTS \E H \210 3569# RI \E M \215 3570# SS3 \E O \217 3571# CSI \E [ \233 3572# 3573xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 3574 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, 3575 colors#8, cols#80, it#8, lines#24, pairs#64, 3576 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3577 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 3578 civis=\233?25l, clear=\233H\2332J, 3579 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, 3580 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, 3581 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 3582 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, 3583 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 3584 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 3585 flash=\233?5h$<100/>\233?5l, home=\233H, 3586 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, 3587 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, 3588 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3589 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, 3590 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 3591 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 3592 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 3593 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 3594 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 3595 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 3596 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 3597 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 3598 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 3599 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 3600 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, 3601 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 3602 rs1=\Ec, 3603 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3604 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 3605 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3606 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3607 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 3608 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 3609 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, 3610 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, 3611 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, 3612 3613xterm-hp|xterm with hpterm function keys, 3614 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 3615 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 3616 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, 3617 knp=\ES, kpp=\ET, use=xterm-basic, 3618 3619xterm-sco|xterm with SCO function keys, 3620 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 3621 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 3622 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 3623 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 3624 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 3625 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 3626 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 3627 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 3628 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 3629 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 3630 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 3631 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, 3632 use=xterm-basic, 3633 3634# The xterm-new description has all of the features, but is not completely 3635# compatible with vt220. If you are using a Sun or PC keyboard, set the 3636# sunKeyboard resource to true: 3637# + maps the editing keypad 3638# + interprets control-function-key as a second array of keys, so a 3639# 12-fkey keyboard can support vt220's 20-fkeys. 3640# + maps numeric keypad "+" to ",". 3641# + uses DEC-style control sequences for the application keypad. 3642# 3643xterm-vt220|xterm emulating vt220, 3644 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3645 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3646 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 3647 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 3648 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3649 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3650 use=xterm+app, use=xterm+edit, use=xterm-basic, 3651 use=vt220+keypad, 3652 3653xterm-vt52|xterm emulating dec vt52, 3654 cols#80, it#8, lines#24, 3655 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3656 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 3657 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 3658 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 3659 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 3660 3661xterm-noapp|xterm with cursor keys in normal mode, 3662 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, 3663 use=xterm, 3664 3665xterm-24|vs100|xterms|xterm terminal emulator (X Window System), 3666 lines#24, use=xterm-old, 3667 3668# This is xterm for ncurses. 3669xterm|xterm terminal emulator (X Window System), 3670 use=xterm-new, 3671 3672# This entry assumes that xterm's handling of VT100 SI/SO is disabled by 3673# setting the vt100Graphics resource to false. 3674xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, 3675 U8#1, use=xterm, 3676 3677# These entries allow access to the X titlebar and icon name as a status line. 3678# Note that twm (and possibly window managers descended from it such as tvtwm, 3679# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess 3680# with it. 3681xterm+sl|access X title line and icon name, 3682 hs, 3683 wsl#40, 3684 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, 3685xterm+sl-twm|access X title line (pacify twm-descended window managers), 3686 hs, 3687 wsl#40, 3688 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, 3689 3690# 3691# The following xterm variants don't depend on your base version 3692# 3693# xterm with bold instead of underline 3694xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 3695 smso=\E[7m, smul=\E[1m, use=xterm-old, 3696 3697# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 3698xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 3699 ich@, ich1@, use=xterm, 3700# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 3701xterm1|xterm terminal emulator ignoring the alternate screen buffer, 3702 rmcup@, smcup@, use=xterm, 3703 3704#### KTERM 3705# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) 3706# (kterm should not invoke DEC Graphics as the alternate character set 3707# -- Kenji Rikitake) 3708# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics 3709# -- MATSUMOTO Shoji) 3710# kterm implements acsc via built-in table of X Drawable's 3711kterm|kterm kanji terminal emulator (X window system), 3712 eslok, hs, XT, 3713 ncv@, 3714 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, 3715 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, 3716 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, 3717 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 3718 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, 3719 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, 3720kterm-color|kterm-co|kterm with ANSI colors, 3721 ncv@, use=kterm, use=ecma+color, 3722 3723#### Other XTERM 3724# These (xtermc and xtermm) are distributed with Solaris. They refer to a 3725# variant of xterm which is apparently no longer supported, but are interesting 3726# because they illustrate SVr4 curses mouse controls - T.Dickey 3727xtermm|xterm terminal emulator (monocrome), 3728 OTbs, am, km, mir, msgr, xenl, 3729 btns#3, cols#80, it#8, lines#24, 3730 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3731 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3732 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 3733 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3734 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3735 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3736 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 3737 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3738 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3739 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 3740 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 3741 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 3742 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 3743 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 3744 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 3745 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3746 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3747 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 3748 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, 3749 3750xtermc|xterm terminal emulator (color), 3751 colors#8, ncv#7, pairs#64, 3752 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3753 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3754 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3755 use=xtermm, 3756 3757# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 3758# Here's a termcap entry I've been using for xterm_color, which comes 3759# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the 3760# color stuff, I also have a status line defined as the window manager 3761# title bar. [I have translated it to terminfo -- ESR] 3762xterm-pcolor|xterm with color used for highlights and status line, 3763 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, 3764 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6, 3765 3766# This describes the capabilities of color_xterm, an xterm variant from 3767# before ECMA-64 color support was folded into the main-line xterm release. 3768# This entry is straight from color_xterm's maintainer. 3769# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996 3770# The README's with the distribution also say that it supports SGR 21, 24, 25 3771# and 27, but they are not present in the terminfo or termcap. 3772color_xterm|cx|cx100|color_xterm color terminal emulator for X, 3773 OTbs, am, km, mir, msgr, xenl, XT, 3774 cols#80, it#8, lines#65, ncv@, 3775 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3776 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3777 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3778 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3779 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3780 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3781 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 3782 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 3783 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 3784 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 3785 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3786 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3787 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 3788 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 3789 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 3790 rmso=\E[27m, rmul=\E[24m, 3791 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 3792 sc=\E7, 3793 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3794 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, 3795 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 3796 smul=\E[4m, use=ecma+color, use=vt220+keypad, 3797 3798# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of 3799# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support 3800# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This 3801# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except 3802# that each of those implements the home, end, delete keys differently. 3803# 3804# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce 3805# colors; note that this is not compatible with the 5.2 version. 3806# csw (2002-05-15): make xterm-color primary instead of nxterm, to 3807# match XFree86's xterm.terminfo usage and prevent circular links 3808xterm-color|nxterm|generic color xterm, 3809 ncv@, 3810 op=\E[m, use=xterm-r6, use=klone+color, 3811 3812# This entry describes an xterm with Sun-style function keys enabled 3813# via the X resource setting "xterm*sunFunctionKeys:true" 3814# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. 3815# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> 3816# because we want it to be seen as <kcpy>. 3817# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance 3818# with their Sun keyboard labels instead. 3819# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 3820xterm-sun|xterm with sunFunctionKeys true, 3821 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, 3822 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, 3823 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, 3824 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, 3825 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, 3826 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, 3827 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, 3828 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, 3829 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, 3830 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, 3831 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, 3832 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, 3833 use=xterm-basic, 3834xterms-sun|small (80x24) xterm with sunFunctionKeys true, 3835 cols#80, lines#24, use=xterm-sun, 3836 3837#### GNOME (VTE) 3838# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 3839gnome-rh62|Gnome terminal, 3840 bce, 3841 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 3842 use=xterm-color, 3843 3844# GNOME Terminal 1.4.0.4 (Redhat 7.2) 3845# 3846# This implements a subset of vt102 with a random selection of features from 3847# other terminals such as color and function-keys. 3848# 3849# shift-f1 to shift-f10 are f11 to f20 3850# 3851# NumLock changes the application keypad to approximate vt100 keypad, except 3852# that there is no escape sequence matching comma (,). 3853# 3854# Other defects observed: 3855# vt100 LNM mode is not implemented. 3856# vt100 80/132 column mode is not implemented. 3857# vt100 DECALN is not implemented. 3858# vt100 DECSCNM mode is not implemented, so flash does not work. 3859# vt100 TBC (tab reset) is not implemented. 3860# xterm alternate screen controls do not restore cursor position properly 3861# it hangs in tack after running function-keys test. 3862gnome-rh72|GNOME Terminal, 3863 bce, km@, 3864 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, 3865 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 3866 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 3867 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, 3868 3869# GNOME Terminal 2.0.1 (Redhat 8.0) 3870# 3871# Documentation now claims it implements vt220 (which is demonstrably false). 3872# However, it does implement ECH, which is a vt220 feature. And there are 3873# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display 3874# more of its bugs using vttest. 3875# 3876# However, note that bce and msgr are broken in this release. Tabs (tbc and 3877# hts) are broken as well. Sometimes flash (as in xterm-new) works. 3878# 3879# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu 3880# operations. Shift-tab generates a distinct sequence so it can be argued 3881# that it implements kcbt. 3882gnome-rh80|GNOME Terminal, 3883 bce@, msgr@, 3884 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, 3885 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, 3886 3887# GNOME Terminal 2.2.1 (Redhat 9.0) 3888# 3889# bce and msgr are repaired. 3890gnome-rh90|GNOME Terminal, 3891 bce, msgr, 3892 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, 3893 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, 3894 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, 3895 use=gnome-rh80, 3896 3897# GNOME Terminal 2.14.2 (Fedora Core 5) 3898# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. 3899gnome-fc5|GNOME Terminal, 3900 rs1=\Ec, 3901 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3902 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, 3903 3904# GNOME Terminal 2.18.1 (2007 snapshot) 3905# 3906# For any "recent" version of gnome-terminal, it is futile to attempt to 3907# support modifiers on cursor- and keypad keys because the program usually 3908# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset 3909# of the keys (which more/less correspond to the termcap values), and will 3910# interpret those according to the $TERM value, but others not in the 3911# terminfo according to some constantly changing set of hacker guidelines -TD 3912vte-2007|VTE in GNOME Terminal snapshot 2.18.1, 3913 use=xterm+pcc2, use=gnome-fc5, 3914gnome-2007|GNOME Terminal snapshot 2.18.1, 3915 use=vte-2007, 3916 3917# GNOME Terminal 2.22.3 (2008 snapshot) 3918# 3919# In vttest, it claims to be a vt220 with national replacement character-sets, 3920# but aside from the identifier string, implements only a small fraction of 3921# vt220's behavior, which will make it less usable on a VMS system (unclear 3922# what the intent of the developer is, since the NRC feature exposed in vttest 3923# by this change does not work). 3924vte-2008|VTE in GNOME Terminal snapshot 2.22.3, 3925 use=vte+pcfkeys, use=vte-2007, 3926gnome-2008|GNOME Terminal snapshot 2.22.3, 3927 use=vte-2008, 3928 3929# GNOME terminal may automatically use the contents of the "xterm" terminfo to 3930# supply key information which is not built into the program. With 2.22.3, 3931# this list is built into the program (which addresses the inadvertant use of 3932# random terminfo data, though using a set of values which does not correspond 3933# to any that xterm produces - still not solving the problem that GNOME 3934# terminal hardcodes the $TERM variable as "xterm"). 3935# 3936# terminfo modifier code keys 3937# kf13-kf24 shift 2 F1 to F12 3938# kf25-kf36 control 5 F1 to F12 3939# kf37-kf48 shift/control 6 F1 to F12 3940# kf49-kf60 alt 3 F1 to F12 3941# kf61-kf63 shift-alt 4 F1 to F3 3942# 3943# The parameters with \EO (SS3) are technically an error, since SS3 should have 3944# no parameters. This appears to be rote copying based on xterm+pcc0. 3945vte+pcfkeys|VTE's variation on xterm+pcfkeys, 3946 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, 3947 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q, 3948 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P, 3949 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S, 3950 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, 3951 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, 3952 use=xterm+pcfkeys, 3953gnome+pcfkeys|VTE's variation on xterm+pcfkeys, 3954 use=vte+pcfkeys, 3955 3956vte|VTE aka GNOME Terminal, 3957 use=vte-2008, 3958gnome|GNOME Terminal, 3959 use=vte, 3960 3961# palette is hardcoded... 3962vte-256color|VTE with xterm 256-colors, 3963 initc@, use=xterm+256color, use=vte, 3964gnome-256color|GNOME Terminal with xterm 256-colors, 3965 use=vte-256color, 3966 3967# XFCE Terminal 0.2.5.4beta2 3968# 3969# This is based on some of the same source code, e.g., the VTE library, as 3970# gnome-terminal, but has fewer features, fails more screens in vttest. 3971# Since most of the terminfo-related behavior is due to the VTE library, 3972# the terminfo is the same as gnome-terminal. 3973xfce|Xfce Terminal, 3974 use=vte, 3975 3976#### Other GNOME 3977# Multi-Gnome-Terminal 1.6.2 3978# 3979# This does not use VTE, and does have different behavior (compare xfce and 3980# gnome). 3981mgt|Multi GNOME Terminal, 3982 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, 3983 3984#### KDE 3985# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce 3986# or not is debatable). 3987kvt|KDE terminal, 3988 bce, km@, 3989 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, 3990 3991# Konsole 1.0.1 3992# (formerly known as kvt) 3993# 3994# This program hardcodes $TERM to 'xterm', which is not accurate. However, to 3995# simplify this entry (and point out why konsole isn't xterm), we base this on 3996# xterm-r6. The default keyboard appears to be 'linux'. 3997# 3998# Notes: 3999# a) konsole implements several features from XFree86 xterm, though none of 4000# that is documented - except of course in its source code - apparently 4001# because its implementors are unaccustomed to reading documentation - as 4002# evidenced by the sparse and poorly edited documentation distributed with 4003# konsole. Some features such as the 1049 private mode are recognized but 4004# incorrectly implemented as a duplicate of the 47 private mode. 4005# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad 4006# sends PC-style escapes rather than vt100. 4007# c) fails vttest menu 3 (Test of character sets) because it does not properly 4008# parse some control sequences. Also fails vttest Primary Device Attributes 4009# by sending a bogus code (in the source it says it's supposed to be a 4010# vt220, which is doubly incorrect because it does not implement vt220 4011# control sequences except for a few special cases). Treat it as a 4012# mildly-broken vt102. 4013# 4014# Update for konsole 1.3.2: 4015# The 1049 private mode works (but see the other xterm screens in vttest). 4016# Primary Device Attributes now returns the code for a vt100 with advanced 4017# video option. Perhaps that's intended to be a "mildly-broken vt102". 4018# 4019# Updated for konsole 1.6.4: 4020# add konsole-solaris 4021# 4022# Updated for konsole 1.6.6: 4023# add control-key modifiers for function-keys, etc. 4024# 4025# vttest menu 1 shows that both konsole and gnome terminal do wrapping 4026# different from xterm (and vt100's). They have the same behavior in this 4027# detail, but it is unclear which copies the other. 4028konsole-base|KDE console window, 4029 bce, km@, npc, XT, 4030 ncv@, 4031 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, 4032 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, 4033 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@, 4034 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, 4035 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 4036 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, 4037 rmso=\E[27m, rmul=\E[24m, 4038 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4039 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4040 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, 4041 use=ecma+color, use=xterm-r6, 4042konsole-linux|KDE console window with linux keyboard, 4043 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 4044 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 4045 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 4046 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4047 use=konsole-base, 4048konsole-solaris|KDE console window with Solaris keyboard, 4049 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4050# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather 4051# than testing the code. 4052konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 4053 kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4054# The value for kbs reflects local customization rather than the settings used 4055# for XFree86 xterm. 4056konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 4057 kend=\EOF, khome=\EOH, use=konsole+pcfkeys, 4058 use=konsole-vt100, 4059# Konsole does not implement shifted cursor-keys. 4060konsole+pcfkeys|konsole subset of xterm+pcfkeys, 4061 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2, 4062 use=xterm+pcf0, 4063# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but 4064# it is still useful for deriving the other entries. 4065konsole-vt100|KDE console window with vt100 (sic) keyboard, 4066 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, 4067 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, 4068 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, 4069 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4070 khome=\E[H, use=konsole-base, 4071konsole-vt420pc|KDE console window with vt420 pc keyboard, 4072 kbs=^H, kdch1=\177, use=konsole-vt100, 4073konsole-16color|klone of xterm-16color, 4074 ncv#32, use=ibm+16color, use=konsole, 4075# make a default entry for konsole 4076konsole|KDE console window, 4077 use=konsole-xf4x, 4078 4079# palette is hardcoded... 4080konsole-256color|KDE console window with xterm 256-colors, 4081 initc@, use=xterm+256color, use=konsole, 4082 4083#### MLTERM 4084# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD 4085# 4086# It is nominally a vt102 emulator, with features borrowed from rxvt and 4087# xterm. 4088# 4089# The function keys are numbered based on shift/control/alt modifiers, except 4090# that the control-modifier itself is used to spawn a new copy of mlterm (the 4091# "-P" option). So control/F1 to control/F12 may not be usable, depending on 4092# how it is configured. 4093# 4094# kf1 to kf12 \E[11~ to \E[24~ 4095# shift kf1 to kf12 \E[11;2~ to \E[24;2~ 4096# alt kf1 to kf12 \E[11;3~ to \E[24;3~ 4097# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ 4098# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) 4099# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ 4100# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ 4101# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ 4102# 4103mlterm|multi lingual terminal emulator, 4104 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, 4105 colors#8, cols#80, it#8, lines#24, pairs#64, 4106 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4107 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4108 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4109 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4110 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4111 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4112 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4113 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, 4114 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 4115 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 4116 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 4117 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4118 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, 4119 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, 4120 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, 4121 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 4122 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, 4123 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 4124 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, 4125 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4126 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 4127 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 4128 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 4129 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 4130 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2, 4131 4132# The insert/delete/home/end keys do not respond to modifiers because mlterm 4133# looks in its termcap to decide which string to send. If it used terminfo 4134# (when available), it could use the extended names introduced for xterm. 4135mlterm+pcfkeys|fragment for PC-style fkeys, 4136 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, 4137 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, 4138 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, 4139 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, 4140 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, 4141 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, 4142 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, 4143 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, 4144 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, 4145 4146mlterm-256color|mlterm 3.0 with xterm 256-colors, 4147 use=xterm+256color, use=rxvt, 4148 4149#### RXVT 4150# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997 4151# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997 4152# Notes: 4153# rxvt 2.21b uses 4154# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, 4155# but some applications don't work with that. 4156# It also has an AIX extension 4157# box2=lqkxjmwuvtn, 4158# and 4159# ech=\E[%p1%dX, 4160# but the latter does not work correctly. 4161# 4162# The distributed terminfo says it implements hpa and vpa, but they are not 4163# implemented correctly, using relative rather than absolute positioning. 4164# 4165# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. 4166# Since rxvt is not really compatible with xterm, it should be configured as 4167# "rxvt" or "rxvt-color". 4168# 4169# removed dch/dch1 because they are inconsistent with bce/ech -TD 4170# remove km as per tack test -TD 4171rxvt-basic|rxvt terminal base (X Window System), 4172 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, 4173 cols#80, it#8, lines#24, 4174 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4175 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4176 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4180 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 4181 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, 4182 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 4183 ind=^J, is1=\E[?47l\E=\E[?1l, 4184 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 4185 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4186 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, 4187 rmul=\E[24m, 4188 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4189 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4190 s0ds=\E(B, s1ds=\E(0, sc=\E7, 4191 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4192 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 4193 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, 4194 use=rxvt+pcfkeys, use=vt220+keypad, 4195# Key Codes from rxvt reference: 4196# 4197# Note: Shift + F1-F10 generates F11-F20 4198# 4199# For the keypad, use Shift to temporarily override Application-Keypad 4200# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock 4201# is off, escape sequences toggle Application-Keypad setting. 4202# Also note that values of Home, End, Delete may have been compiled 4203# differently on your system. 4204# 4205# Normal Shift Control Ctrl+Shift 4206# Tab ^I ESC [ Z ^I ESC [ Z 4207# BackSpace ^H ^? ^? ^? 4208# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ 4209# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ 4210# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4211# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ 4212# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ 4213# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ 4214# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ 4215# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ 4216# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4217# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ 4218# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ 4219# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ 4220# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ 4221# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ 4222# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ 4223# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ 4224# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ 4225# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ 4226# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ 4227# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ 4228# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ 4229# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ 4230# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ 4231# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ 4232# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ 4233# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ 4234# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ 4235# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ 4236# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ 4237# 4238# Application 4239# Up ESC [ A ESC [ a ESC O a ESC O A 4240# Down ESC [ B ESC [ b ESC O b ESC O B 4241# Right ESC [ C ESC [ c ESC O c ESC O C 4242# Left ESC [ D ESC [ d ESC O d ESC O D 4243# KP_Enter ^M ESC O M 4244# KP_F1 ESC O P ESC O P 4245# KP_F2 ESC O Q ESC O Q 4246# KP_F3 ESC O R ESC O R 4247# KP_F4 ESC O S ESC O S 4248# XK_KP_Multiply * ESC O j 4249# XK_KP_Add + ESC O k 4250# XK_KP_Separator , ESC O l 4251# XK_KP_Subtract - ESC O m 4252# XK_KP_Decimal . ESC O n 4253# XK_KP_Divide / ESC O o 4254# XK_KP_0 0 ESC O p 4255# XK_KP_1 1 ESC O q 4256# XK_KP_2 2 ESC O r 4257# XK_KP_3 3 ESC O s 4258# XK_KP_4 4 ESC O t 4259# XK_KP_5 5 ESC O u 4260# XK_KP_6 6 ESC O v 4261# XK_KP_7 7 ESC O w 4262# XK_KP_8 8 ESC O x 4263# XK_KP_9 9 ESC O y 4264# 4265# The source-code for rxvt actually defines mappings for F21-F35, using 4266# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys 4267# are rare, so this entry uses the shift- and control-modifiers as in 4268# xterm+pcfkeys to define keys past F12. 4269# 4270# kIC is normally not used, since rxvt performs a paste for that (shifted 4271# insert), unless private mode 35 is set. 4272# 4273# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD 4274# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD 4275rxvt+pcfkeys|fragment for PC-style fkeys, 4276 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, 4277 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, 4278 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 4279 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 4280 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 4281 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 4282 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, 4283 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, 4284 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, 4285 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, 4286 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, 4287 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, 4288 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, 4289 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4290 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~, 4291 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, 4292 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@, 4293 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@, 4294 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^, 4295 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa, 4296 4297rxvt|rxvt terminal emulator (X Window System), 4298 ncv@, 4299 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, 4300 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, 4301rxvt-color|rxvt terminal emulator (X Window System), 4302 use=rxvt, 4303rxvt-256color|rxvt 2.7.9 with xterm 256-colors, 4304 use=xterm+256color, use=rxvt, 4305rxvt-88color|rxvt 2.7.9 with xterm 88-colors, 4306 use=xterm+88color, use=rxvt, 4307rxvt-xpm|rxvt terminal emulator (X Window System), 4308 use=rxvt, 4309rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 4310 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4311 use=rxvt, 4312rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 4313 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, 4314 use=rxvt-cygwin, 4315 4316# This variant is supposed to work with rxvt 2.7.7 when compiled with 4317# NO_BRIGHTCOLOR defined. rxvt needs more work... 4318rxvt-16color|xterm with 16 colors like aixterm, 4319 ncv#32, use=ibm+16color, use=rxvt, 4320 4321#### MRXVT 4322# mrxvt 0.5.4 4323# 4324# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which 4325# makes its function-keys different from other flavors of rxvt -TD 4326mrxvt|multitabbed rxvt, 4327 XT, 4328 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, 4329 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, 4330 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, 4331 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, 4332 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, 4333 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, 4334 use=rxvt, 4335 4336mrxvt-256color|multitabbed rxvt with 256 colors, 4337 use=xterm+256color, use=mrxvt, 4338 4339#### ETERM 4340# From: Michael Jennings <mej@valinux.com> 4341# 4342# Eterm 0.9.3 4343# 4344# removed kf0 which conflicts with kf10 -TD 4345# remove cvvis which conflicts with cnorm -TD 4346# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT 4347# but does otherwise follow the rxvt+pcfkeys model -TD 4348# remove nonworking flash -TD 4349# remove km as per tack test -TD 4350Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 4351 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, 4352 btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 4353 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4354 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4355 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4356 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4357 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4358 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4359 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4360 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 4361 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 4362 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 4363 is1=\E[?47l\E>\E[?1l, 4364 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, 4365 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, 4366 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, 4367 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4368 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, 4369 rmso=\E[27m, rmul=\E[24m, 4370 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4371 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4372 sc=\E7, 4373 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4374 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 4375 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 4376 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, 4377 use=ecma+color, 4378 4379Eterm-256color|Eterm with xterm 256-colors, 4380 use=xterm+256color, use=Eterm, 4381 4382Eterm-88color|Eterm with 88 colors, 4383 use=xterm+88color, use=Eterm, 4384 4385#### ATERM 4386# Based on rxvt 2.4.8, it has a few differences in key bindings 4387aterm|AfterStep terminal, 4388 XT, 4389 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, 4390 4391#### XITERM 4392# xiterm 0.5-5.2 4393# This is not based on xterm's source... 4394# vttest shows several problems with keyboard, cursor-movements. 4395# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm 4396xiterm|internationalized terminal emulator for X, 4397 km@, 4398 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, 4399 4400 4401#### HPTERM 4402# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in 4403# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS 4404# chars look like --esr) 4405hpterm|X-hpterm|hp X11 terminal emulator, 4406 am, da, db, mir, xhp, 4407 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 4408 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 4409 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 4410 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 4411 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 4412 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 4413 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 4414 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 4415 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 4416 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 4417 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 4418 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 4419 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 4420 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 4421 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 4422 rmul=\E&d@, 4423 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 4424 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 4425 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 4426# HPUX 11 provides a color version. 4427hpterm-color|HP X11 terminal emulator with color, 4428 ccc, 4429 colors#64, pairs#8, 4430 home=\E&a0y0C, 4431 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, 4432 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, 4433 4434#### EMU 4435# This is for the extensible terminal emulator on the X11R6 contrib tape. 4436# It corresponds to emu's internal emulation: 4437# emu -term emu 4438# emu's default sets TERM to "xterm", but that doesn't work well -TD 4439# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD 4440# fixes: add civis, cnorm, sgr -TD 4441emu|emu native mode, 4442 am, bce, mir, msgr, xon, 4443 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 4444 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 4445 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, 4446 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, 4447 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, 4448 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, 4449 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, 4450 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, 4451 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, 4452 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, 4453 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, 4454 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, 4455 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, 4456 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, 4457 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, 4458 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, 4459 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, 4460 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 4461 setaf=\Er%i%p1%d;, 4462 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, 4463 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, 4464 4465# vt220 Terminfo entry for the Emu emulation, corresponds to 4466# emu -term vt220 4467# with NumLock set (to make the keypad transmit kf0-kf9). 4468# fixes: add am, xenl, corrected sgr0 -TD 4469emu-220|Emu-220 (vt200-7bit mode), 4470 am, xenl, xon, 4471 cols#80, it#8, lines#24, vt#200, 4472 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 4473 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, 4474 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 4475 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 4476 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 4477 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 4478 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, 4479 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 4480 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, 4481 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, 4482 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 4483 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, 4484 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, 4485 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, 4486 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, 4487 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, 4488 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, 4489 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 4490 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, 4491 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, 4492 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, 4493 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4494 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, 4495 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 4496 4497#### MVTERM 4498# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, 4499# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings 4500# indicate that it emulates more than one terminal, but incompletely. 4501# 4502# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net> 4503# It is based on vt102's entry, with some subtle differences, but also 4504# has status line 4505# supports ANSI colors (except for 'op' string) 4506# apparently implements alternate screen like xterm 4507# does not use padding, of course. 4508mvterm|vv100|SwitchTerm aka mvTERM, 4509 am, eslok, hs, km, mir, msgr, xenl, 4510 colors#8, cols#80, it#8, lines#24, pairs#64, 4511 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4512 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 4513 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4514 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4515 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4516 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4517 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, 4518 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4519 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, 4520 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, 4521 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, 4522 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4523 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, 4524 rmul=\E[m, 4525 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 4526 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4527 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4528 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, 4529 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 4530 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, 4531 4532#### MTERM 4533# 4534# This application is available by email from <mouse@Rodents.Montreal.QC.CA>. 4535# 4536# "mterm -type ansi" sets $TERM to "ansi" 4537mterm-ansi|ANSI emulation, 4538 am, bw, mir, msgr, 4539 it#8, 4540 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4541 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4542 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 4543 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4544 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 4545 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 4546 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 4547 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 4548 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, 4549 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 4550 rmul=\E[24m, 4551 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4552 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, 4553 vpa=\E[%i%p1%dd, 4554# mterm normally sets $TERM to "mterm" 4555mterm|mouse-sun|Der Mouse term, 4556 am, bw, mir, 4557 it#8, 4558 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, 4559 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 4560 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, 4561 rmir=^O, rmso=^T, smir=^Q, smso=^V, 4562# "mterm -type decansi" sets $TERM to "decansi" 4563# 4564# note: kdch1, kfnd, kslt are in the source code, but do not work -TD 4565decansi|ANSI emulation with DEC compatibility hacks, 4566 am, mir, msgr, xenl, 4567 colors#8, it#8, pairs#64, 4568 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4569 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4570 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 4571 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 4572 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4573 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4574 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 4575 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 4576 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 4577 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, 4578 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, 4579 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, 4580 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4581 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4582 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 4583 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4584 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 4585 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 4586 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 4587 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, 4588 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4589 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4590 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 4591 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, 4592 u7=\E[6n, vpa=\E[%i%p1%dd, 4593 4594#### VWM 4595# 4596# vwmterm is a terminal emulator written for the VWM console window manager 4597# 4598vwmterm|(vwm term), 4599 am, bce, ccc, mir, msgr, npc, xenl, xon, 4600 colors#8, pairs#64, 4601 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4602 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4603 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, 4604 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 4605 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 4606 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, 4607 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, 4608 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 4609 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~, 4610 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 4611 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4612 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, 4613 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec, 4614 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4615 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 4616 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, 4617 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m, 4618 4619#### MGR 4620# 4621# MGR is a Bell Labs window system lighter-weight than X. 4622# These entries describe MGR's xterm-equivalent. 4623# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 4624# 4625 4626mgr|Bellcore MGR (non X) window system terminal emulation, 4627 am, km, 4628 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, 4629 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 4630 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 4631 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 4632 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 4633 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 4634 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 4635 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, 4636 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 4637 smul=\E4n, 4638mgr-sun|Mgr window with Sun keyboard, 4639 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 4640 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 4641 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 4642 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 4643 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 4644 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 4645 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 4646mgr-linux|Mgr window with Linux keyboard, 4647 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 4648 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 4649 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 4650 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4651 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 4652 4653#### SIMPLETERM 4654# st.suckless.org 4655# st-0.1.1 4656# 4657# Note: the original terminfo description uses leading blank to persuade 4658# ncurses to use "st" as its name. Proper fix for that is to use "st" as an 4659# alias. 4660# 4661# Reading the code shows it should work for aixterm 16-colors 4662# - added st-16color 4663# 4664# Using tack: 4665# - set eo (erase-overstrike) 4666# - set xenl 4667# - tbc doesn't work 4668# - hts works 4669# - cbt doesn't work 4670# - shifted cursor-keys send sequences like rxvt 4671# - sgr referred to unimplemented "invis" mode. 4672# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis 4673simpleterm|st| simpleterm, 4674 am, eo, mir, msgr, ul, xenl, 4675 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 4676 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4677 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 4678 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 4679 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4680 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4681 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 4682 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 4683 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D, 4684 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 4685 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 4686 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 4687 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4688 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, 4689 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, 4690 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4691 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 4692 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, 4693st-16color|simpleterm with 16-colors, 4694 use=ibm+16color, use=simpleterm, 4695# 256 colors "works", but when running xterm's test-scripts, some garbage is 4696# shown in the titlebar. 4697st-256color|simpleterm with 256 colors, 4698 ccc@, 4699 initc@, use=simpleterm, use=xterm+256color, 4700 4701### TERMINATOR 4702# http://software.jessies.org/terminator/ 4703# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit 4704# Debian/current -TD (2011/8/20) 4705# 4706# There are some packaging problems: 4707# a) using Java, the program starts off using 50Mb, and climbs from there, 4708# up to 114Mb after testing (no scrollback). 4709# b) it insists on reinstalling its terminal description in $HOME/.terminfo 4710# (two copies, just in case the host happens to be Mac OS X). 4711# I deleted this after testing with tack. 4712# 4713# Issues/features found with tack: 4714# a) tbc does not work (implying that hts also is broken). 4715# Comparing with the tabs utility shows a problem with the last tabstop on 4716# a line. 4717# b) has xterm-style shifted function-key strings 4718# meta also is used, but control is ignored. 4719# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta) 4720# d) some combinations of shift/control send xterm-style sequences for 4721# insert/delete/home/end. 4722# e) numeric keypad sends only numbers (compare with vttest). 4723# f) meta mode (km) is not implemented. 4724# 4725# Issues found with ncurses test-program: 4726# a) bce is inconsistently implemented 4727# b) widths of Unicode values above 256 do not always agree with wcwidth. 4728# 4729# Checked with vttest, found low degree of compatibility there. 4730# 4731# Checked with xterm's scripts, found that the 256-color palette is fixed. 4732# 4733# Fixes: 4734# a) add sgr string 4735# b) corrected sgr0 to reset alternate character set 4736# c) modified smacs/rmacs to use SCS rather than SI/SO 4737# d) removed bce 4738# e) removed km 4739terminator|Terminator no line wrap, 4740 eo, mir, msgr, xenl, xon, 4741 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767, 4742 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4743 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 4744 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 4745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 4746 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4747 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 4748 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K, 4749 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H, 4750 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, 4751 ind=^J, is1=\E[?47l\E=\E[?1l, 4752 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 4753 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4754 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 4755 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 4756 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4757 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4758 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 4759 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 4760 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 4761 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4762 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 4763 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm, 4764 setaf=\E[38;5;%p1%dm, 4765 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;, 4766 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h, 4767 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, 4768 vpa=\E[%i%p1%dd, 4769 4770######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS 4771# 4772 4773# Columbus UNIX virtual terminal. This terminal also appears in 4774# UNIX 4.0 and successors as line discipline 1 (?), but is 4775# undocumented and does not really work quite right. 4776cbunix|cb unix virtual terminal, 4777 OTbs, am, da, db, 4778 cols#80, lines#24, lm#0, 4779 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 4780 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 4781 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 4782 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 4783 smso=\Ea^D, smul=\Ea^A, 4784# (vremote: removed obsolete ":nl@:" -- esr) 4785vremote|virtual remote terminal, 4786 am@, 4787 cols#79, use=cbunix, 4788 4789pty|4bsd pseudo teletype, 4790 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 4791 smso=\Ea$, smul=\Ea!, use=cbunix, 4792 4793# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 4794eterm|gnu emacs term.el terminal emulation, 4795 am, mir, xenl, 4796 cols#80, lines#24, 4797 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4798 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4799 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4800 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4801 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4802 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 4803 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, 4804 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 4805 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, 4806 smul=\E[4m, 4807 4808# The codes supported by the term.el terminal emulation in GNU Emacs 22.2 4809eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, 4810 am, mir, msgr, xenl, 4811 colors#8, cols#80, lines#24, pairs#64, 4812 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4813 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4814 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4815 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4816 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4817 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 4818 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177, 4819 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4820 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, 4821 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, 4822 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 4823 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, 4824 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 4825 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 4826 u6=\E[%i%d;%dR, u7=\E[6n, 4827 4828# Entries for use by the `screen' program by Juergen Weigert, 4829# Michael Schroeder, Oliver Laumann. The screen and 4830# screen-w entries came with version 3.7.1. The screen2 and screen3 entries 4831# come from University of Wisconsin and may be older. 4832# (screen: added <cnorm> on ANSI model -- esr) 4833# 4834# 'screen' defines extensions to termcap. Some are used in its terminal 4835# description: 4836# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 4837# AX (bool) Does understand ANSI set default fg/bg color 4838# (\E[39m / \E[49m). 4839# S0 (str) Switch charset 'G0' to the specified charset. 4840# E0 (str) Switch charset 'G0' back to standard charset. 4841# 4842# tested with screen 3.09.08 4843screen|VT 100/ANSI X3.64 virtual terminal, 4844 OTbs, OTpt, am, km, mir, msgr, xenl, G0, 4845 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1, 4846 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4847 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4848 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, 4849 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4850 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4851 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 4852 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4853 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 4854 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4855 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, 4856 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4857 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 4858 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4859 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4860 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 4861 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4862 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, 4863 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, 4864 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4865 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, 4866 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, 4867 S0=\E(%p1%c, use=ecma+color, 4868# The bce and status-line entries are from screen 3.9.13 (and require some 4869# changes to .screenrc). 4870screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 4871 bce, 4872 ech@, use=screen, 4873screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 4874 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 4875 4876# ====================================================================== 4877# Entries for GNU Screen with 16 colors. 4878# Those variations permit to benefit from 16 colors palette, and from 4879# bold font and blink attribute separated from bright colors. But they 4880# are less portable than the generic "screen" 8 color entries: Their 4881# usage makes real sense only if the terminals you attach and reattach 4882# do all support 16 color palette. 4883 4884screen-16color|GNU Screen with 16 colors, 4885 use=ibm+16color, use=screen, 4886 4887screen-16color-s|GNU Screen with 16 colors and status line, 4888 use=ibm+16color, use=screen-s, 4889 4890screen-16color-bce|GNU Screen with 16 colors and BCE, 4891 use=ibm+16color, use=screen-bce, 4892 4893screen-16color-bce-s|GNU Screen with 16 colors BCE and status line, 4894 bce, use=ibm+16color, use=screen-s, 4895 4896# ====================================================================== 4897# Entries for GNU Screen 4.02 with --enable-colors256. 4898 4899screen-256color|GNU Screen with 256 colors, 4900 ccc@, 4901 initc@, use=xterm+256color, use=screen, 4902 4903screen-256color-s|GNU Screen with 256 colors and status line, 4904 ccc@, 4905 initc@, use=xterm+256color, use=screen-s, 4906 4907screen-256color-bce|GNU Screen with 256 colors and BCE, 4908 ccc@, 4909 initc@, use=xterm+256color, use=screen-bce, 4910 4911screen-256color-bce-s|GNU Screen with 256 colors BCE and status line, 4912 bce, ccc@, 4913 initc@, use=xterm+256color, use=screen-s, 4914 4915# ====================================================================== 4916 4917# Read the fine manpage: 4918# When screen tries to figure out a terminal name for 4919# itself, it first looks for an entry named "screen.<term>", 4920# where <term> is the contents of your $TERM variable. If 4921# no such entry exists, screen tries "screen" (or "screen-w" 4922# if the terminal is wide (132 cols or more)). If even this 4923# entry cannot be found, "vt100" is used as a substitute. 4924# 4925# Notwithstanding the manpage, screen uses its own notion of the termcap 4926# and some keys from "screen.<term>" are ignored. Here is an entry which 4927# covers those (tested with screen 4.00.02) -TD 4928screen+fkeys|function-keys according to screen, 4929 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, 4930 khome=\E[1~, kslt@, 4931# 4932# Here are a few customized entries which are useful -TD 4933# 4934# Notes: 4935# (a) screen does not support invis. 4936# (b) screen's implementation of bw is incorrect according to tack. 4937# (c) screen appears to hardcode the strings for khome/kend, making it 4938# necessary to override the "use=" clause's values (screen+fkeys). 4939# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, 4940# which is NOT the same as the terminfo screen.<term>. 4941# (e) when screen finds one of these customized entries, it sets $TERM to 4942# match. Hence, no "screen.xterm" entry is provided, since that would 4943# create heartburn for people running remote xterm's. 4944# 4945# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV 4946# since the default translations override the built-in keycode 4947# translation. They are suppressed here to show what is tested by tack. 4948screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, 4949 bce@, bw, 4950 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, 4951 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, 4952 use=screen+fkeys, use=xterm-new, 4953# xterm-r6 does not really support khome/kend unless it is propped up by 4954# the translations resource. 4955screen.xterm-r6|screen customized for X11R6 xterm, 4956 bw, use=screen+fkeys, use=xterm-r6, 4957# Color applications running in screen and TeraTerm do not play well together 4958# on Solaris because Sun's curses implementation gets confused. 4959screen.teraterm|disable ncv in teraterm, 4960 ncv#127, 4961 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4962 use=screen+fkeys, use=screen, 4963# Other terminals 4964screen.rxvt|screen in rxvt, 4965 bw, XT, 4966 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4967 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, 4968 use=rxvt+pcfkeys, use=vt220+keypad, use=screen, 4969screen.Eterm|screen in Eterm, 4970 use=screen+fkeys, use=Eterm, 4971screen.mrxvt|screen in mrxvt, 4972 use=screen+fkeys, use=mrxvt, 4973screen.vte|screen in any VTE-based terminal, 4974 use=screen+fkeys, use=vte, 4975screen.gnome|screen in GNOME Terminal, 4976 use=screen+fkeys, use=gnome, 4977screen.konsole|screen in KDE console window, 4978 use=screen+fkeys, use=konsole, 4979# fix the backspace key 4980screen.linux|screen in linux console, 4981 bw, 4982 kbs=\177, kcbt@, use=screen+fkeys, use=screen, 4983screen.mlterm|screen in mlterm, 4984 use=screen+fkeys, use=mlterm, 4985 4986# The default "screen" entry is reasonably portable, but not optimal for the 4987# most widely-used terminal emulators. The "bce" capability is supported in 4988# screen since 3.9.13, and when used, will require fewer characters to be sent 4989# to the terminal for updates. 4990# 4991# If you are using only terminals which support bce, then you can use this 4992# feature in your screen configuration. 4993# 4994# Adding these lines to your ".screenrc" file will allow using these customized 4995# entries: 4996# term screen-bce 4997# bce on 4998# defbce on 4999screen-bce.xterm-new|screen optimized for modern xterm, 5000 bce, 5001 ech@, use=screen.xterm-new, 5002screen-bce.rxvt|screen optimized for rxvt, 5003 bce, 5004 ech@, use=screen.rxvt, 5005screen-bce.Eterm|screen optimized for Eterm, 5006 bce, 5007 ech@, use=screen.Eterm, 5008screen-bce.mrxvt|screen optimized for mrxvt, 5009 bce, 5010 ech@, use=screen.mrxvt, 5011screen-bce.gnome|screen optimized for GNOME-Terminal, 5012 bce, 5013 ech@, use=screen.gnome, 5014screen-bce.konsole|screen optimized for KDE console window, 5015 bce, 5016 ech@, use=screen.konsole, 5017screen-bce.linux|screen optimized for linux console, 5018 bce, 5019 ech@, use=screen.linux, 5020screen-bce.mlterm|screen optimized for mlterm, 5021 bce, 5022 ech@, use=screen.mlterm, 5023 5024screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 5025 cols#132, use=screen, 5026 5027screen2|old VT 100/ANSI X3.64 virtual terminal, 5028 cols#80, it#8, lines#24, 5029 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, 5030 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5031 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5032 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5033 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 5034 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5035 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 5036 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 5037 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 5038 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 5039 smso=\E[3m, smul=\E[4m, tbc=\E[3g, 5040# (screen3: removed unknown ":xv:LP:G0:" -- esr) 5041screen3|older VT 100/ANSI X3.64 virtual terminal, 5042 km, mir, msgr, 5043 cols#80, it#8, lines#24, 5044 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 5045 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5046 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5047 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 5048 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5049 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5050 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, 5051 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 5052 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 5053 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 5054 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 5055 smul=\E[4m, tbc=\E[3g, 5056 5057# Francesco Potorti <F.Potorti@cnuce.cnr.it>: 5058# NCSA telnet is one of the most used telnet clients for the Macintosh. It has 5059# been maintained until recently by the National Center for Supercomputer 5060# Applications, and it is feature rich, stable and free. It can be downloaded 5061# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, 5062# xterm+sl, and the docs at NCSA. It works well. 5063# 5064# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode 5065# The terminal options should be set as follows: 5066# Xterm sequences ON 5067# use VT wrap mode ON 5068# use Emacs arrow keys OFF 5069# CTRL-COMND is Emacs meta ON 5070# 8 bit mode ON 5071# answerback string: "ncsa-vt220-8" 5072# setup keys: all disabled 5073# 5074# Application mode is not used. 5075# 5076# Other special mappings: 5077# Apple VT220 5078# HELP Find 5079# HOME Insert here 5080# PAGEUP Remove 5081# DEL Select 5082# END Prev Screen 5083# PAGEDOWN Next Screen 5084# 5085# Though it supports ANSI color, NCSA Telnet uses color to represent blinking 5086# text. 5087# 5088# The status-line manipulation is a mapping of the xterm-compatible control 5089# sequences for setting the window-title. So you must use tsl and fsl in 5090# pairs, since the latter ends the string that is loaded to the window-title. 5091ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5092 am, hs, km, mir, msgr, xenl, 5093 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5094 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5095 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 5096 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5097 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5098 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5099 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 5100 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 5101 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, 5102 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 5103 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, 5104 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 5105 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5106 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 5107 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 5108 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 5109 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 5110 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 5111 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 5112 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 5113 rmso=\E[27m, rmul=\E[24m, 5114 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 5115 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 5116 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, 5117 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, 5118 u8=\E[?62;1;6c, use=ansi+enq, 5119ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5120 use=ncsa-m, use=klone+color, 5121ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5122 hs@, 5123 dsl@, fsl@, tsl@, use=ncsa, 5124ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5125 hs@, 5126 dsl@, fsl@, tsl@, use=ncsa-m, 5127# alternate -TD: 5128# The documented function-key mapping refers to the Apple Extended Keyboard 5129# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style 5130# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on 5131# some keyboards and many applications require these as F1-F4. 5132# 5133ncsa-vt220|NCSA Telnet using vt220-compatible function keys, 5134 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5135 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 5136 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 5137 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 5138 kf8=\E[19~, kf9=\E[20~, use=ncsa, 5139 5140#### Pilot Pro Palm-Top 5141# 5142# Termcap for Top Gun Telnet and SSH on the Palm Pilot. 5143# http://www.ai/~iang/TGssh/ 5144pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 5145 OTbs, am, xenl, 5146 cols#39, lines#16, 5147 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 5148 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 5149 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, 5150 rmso=\EB, smso=\Eb, 5151 5152# From: Federico Bianchi <bianchi@www.arte.unipi.it> 5153# These entries are for the Embeddable Linux Kernel System (ELKS) 5154# project - an heavily stripped down Linux to be run on 16 bit 5155# boxes or, eventually, to be used in embedded systems - and have been 5156# adapted from the stock ELKS termcap. The project itself looks stalled, 5157# and the latest improvements I know of date back to March 2000. 5158# 5159# To cope with the ELKS dumb console I added an "elks-glasstty" entry; 5160# as an added bonus, this deals with all the capabilities common to 5161# both VT52 and ANSI (or, eventually, "special") modes. 5162 5163elks-glasstty|ELKS glass-TTY capabilities, 5164 OTbs, am, 5165 cols#80, it#8, lines#25, 5166 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 5167 nel=^M^J, 5168 5169elks-vt52|ELKS vt52 console, 5170 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 5171 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 5172 home=\EH, use=elks-glasstty, 5173 5174elks-ansi|ELKS ANSI console, 5175 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5176 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5177 rmso=\E[m, smso=\E[7m, use=elks-glasstty, 5178 5179# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation 5180# instead of VT52, but the "elks" entry still refers to the latter. 5181 5182elks|default ELKS console, 5183 use=elks-vt52, 5184 5185# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS 5186# one but in screen size 5187 5188sibo|ELKS SIBO console, 5189 cols#61, it#8, lines#20, use=elks-vt52, 5190 5191######## COMMERCIAL WORKSTATION CONSOLES 5192# 5193 5194#### Alpha consoles 5195# 5196 5197# This is from the OSF/1 Release 1.0 termcap file 5198pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 5199 am, xon, 5200 cols#80, lines#25, 5201 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5202 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 5203 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 5204 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 5205 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5206 5207#### Sun consoles 5208# 5209 5210# :is1: resets scrolling region in case a previous user had used "tset vt100" 5211oldsun|Sun Microsystems Workstation console, 5212 OTbs, am, km, mir, msgr, 5213 cols#80, it#8, lines#34, 5214 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 5215 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5216 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5217 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5218 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5219 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 5220 rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5221# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995 5222# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com> 5223# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) 5224sun-il|Sun Microsystems console with working insert-line, 5225 am, km, msgr, 5226 cols#80, lines#34, 5227 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5228 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5229 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5230 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5231 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5232 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, 5233 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 5234 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 5235 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 5236 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, 5237 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, 5238 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, 5239 smso=\E[7m, u8=\E[1t, u9=\E[11t, 5240# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il> 5241# flake out on the last line. Unfortunately, without them the terminal has no 5242# way to scroll. 5243sun-cgsix|sun-ss5|Sun SparcStation 5 console, 5244 il@, il1@, use=sun-il, 5245# If you are using an SS5, change the sun definition to use sun-ss5. 5246sun|sun1|sun2|Sun Microsystems Inc. workstation console, 5247 use=sun-il, 5248 5249# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 5250sun-s|Sun Microsystems Workstation window with status line, 5251 hs, 5252 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, 5253sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 5254 hs, 5255 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, 5256sun-48|Sun 48-line window, 5257 cols#80, lines#48, use=sun, 5258sun-34|Sun 34-line window, 5259 cols#80, lines#34, use=sun, 5260sun-24|Sun 24-line window, 5261 cols#80, lines#24, use=sun, 5262sun-17|Sun 17-line window, 5263 cols#80, lines#17, use=sun, 5264sun-12|Sun 12-line window, 5265 cols#80, lines#12, use=sun, 5266sun-1|Sun 1-line window for sysline, 5267 eslok, hs, 5268 cols#80, lines#1, 5269 dsl=^L, fsl=\E[K, tsl=^M, use=sun, 5270sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 5271 ich1@, rmir@, smir@, use=sun, 5272sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 5273 lines#35, 5274 rmcup=\E[>4h, smcup=\E[>4l, use=sun, 5275sun-type4|Sun Workstation console with type 4 keyboard, 5276 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 5277 kcuu1=\E[215z, use=sun-il, 5278 5279# Most of the current references to sun-color are from users wondering why this 5280# is the default on install. Details from reading the wscons manpage, adding 5281# cub, etc., here (rather than in the base sun-il entry) since it is not clear 5282# when those were added -TD (2005-05-28) 5283# 5284# According to wscons manpage, color is supported only on IA systems. 5285# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons 5286# does not list these. It also sets ncv#3, however that corresponds to 5287# underline and standout. 5288# 5289# Since the documentation and terminfo do not agree, see also current code at 5290# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c 5291# 5292# That (actually a different driver which "supports" sun-color) also supports 5293# these features: 5294# vpa=\E[%i%p1%dd 5295# hpa=\E[%i%p1%d` 5296# cbt=\E[Z 5297# dim=\E[2m 5298# blink=\E[5m 5299# It supports bold -TD (2009-09-19) 5300# Color support is up from 8 to 16 to 256. 5301sun-color|Sun Microsystems Workstation console with color support (IA systems), 5302 colors#256, ncv#3, pairs#32767, 5303 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 5304 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, bold=\E[1m, 5305 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5306 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5307 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5308 civis=\E[?25l, cnorm=\E[?25h, 5309 smso=\E[7m, rmso=\E[27m, smul=\E[4m, rmul=\E[24m, use=sun, 5310 5311#### Iris consoles 5312# 5313 5314# (wsiris: this had extension capabilities 5315# :HS=\E7F2:HE=\E7F7:\ 5316# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: 5317# See the note on Iris extensions near the end of this file. 5318# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 5319# <flash> from BRL -- esr) 5320wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 5321 OTbs, OTnc, OTpt, am, 5322 OTkn#3, cols#80, it#8, lines#40, 5323 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 5324 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 5325 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 5326 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 5327 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 5328 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 5329 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 5330 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 5331 smul=\E7R2\E9P, 5332 5333#### NeWS consoles 5334# 5335# Console terminal windows under the NeWS (Sun's Display Postscript windowing 5336# environment). Note: these have nothing to do with Sony's News workstation 5337# line. 5338# 5339 5340# Entry for NeWS's psterm from Eric Messick & Hugh Daniel 5341# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) 5342psterm|psterm-basic|NeWS psterm-80x34, 5343 OTbs, am, hs, km, ul, 5344 cols#80, it#8, lines#34, 5345 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, 5346 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, 5347 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, 5348 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, 5349 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 5350 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], 5351 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, 5352 tsl=\EOl, 5353psterm-96x48|NeWS psterm 96x48, 5354 cols#96, lines#48, use=psterm, 5355psterm-90x28|NeWS psterm 90x28, 5356 cols#90, lines#28, use=psterm, 5357psterm-80x24|NeWS psterm 80x24, 5358 cols#80, lines#24, use=psterm, 5359# This is a faster termcap for psterm. Warning: if you use this termcap, 5360# some control characters you type will do strange things to the screen. 5361# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) 5362psterm-fast|NeWS psterm fast version (flaky ctrl chars), 5363 OTbs, am, hs, km, ul, 5364 cols#80, it#8, lines#34, 5365 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, 5366 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, 5367 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, 5368 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5369 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, 5370 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, 5371 smso=^Oo, smul=^Ou, tsl=^Ol, 5372 5373#### NeXT consoles 5374# 5375# Use `glasstty' for the Workspace application 5376# 5377 5378# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995 5379next|NeXT console, 5380 am, xt, 5381 cols#80, it#8, lines#24, 5382 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5383 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5384 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 5385 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, 5386nextshell|NeXT Shell application, 5387 am, 5388 cols#80, 5389 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, 5390 kcud1=^J, nel=^M^J, 5391 5392#### Sony NEWS workstations 5393# 5394 5395# (news-unk: this had :KB=news: -- esr) 5396news-unk|SONY NEWS vt100 emulator common entry, 5397 OTbs, OTpt, am, xenl, 5398 cols#80, 5399 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 5400 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 5401 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 5402 ed=\E[J, el=\E[K, home=\E[H, ht=^I, 5403 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 5404 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 5405 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, 5406 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 5407 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, 5408 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 5409 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, 5410 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 5411# 5412# (news-29: this had :TY=ascii: --esr) 5413news-29, 5414 lines#29, use=news-unk, 5415# (news-29-euc: this had :TY=euc: --esr) 5416news-29-euc, 5417 use=news-29, 5418# (news-29-sjis: this had :TY=sjis: --esr) 5419news-29-sjis, 5420 use=news-29, 5421# 5422# (news-33: this had :TY=ascii: --esr) 5423news-33, 5424 lines#33, use=news-unk, 5425# (news-33-euc: this had :TY=euc: --esr) 5426news-33-euc, 5427 use=news-33, 5428# (news-33-sjis: this had :TY=sjis: --esr) 5429news-33-sjis, 5430 use=news-33, 5431# 5432# (news-42: this had :TY=ascii: --esr) 5433news-42, 5434 lines#42, use=news-unk, 5435# (news-42-euc: this had :TY=euc: --esr) 5436news-42-euc, 5437 use=news-42, 5438# (news-42-sjis: this had :TY=sjis: --esr) 5439news-42-sjis, 5440 use=news-42, 5441# 5442# NEWS-OS old termcap entry 5443# 5444# (news-old-unk: this had :KB=news:TY=sjis: --esr) 5445news-old-unk|SONY NEWS vt100 emulator common entry, 5446 OTbs, OTpt, am, xenl, 5447 cols#80, vt#3, 5448 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 5449 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 5450 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 5451 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, 5452 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 5453 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, 5454 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 5455 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 5456 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 5457# 5458# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) 5459nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, 5460 OTbs, 5461 lines#40, 5462 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 5463 use=news-old-unk, 5464# 5465# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) 5466nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, 5467 lines#42, 5468 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, 5469 use=news-old-unk, 5470# 5471# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr) 5472nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, 5473 OTbs, 5474 lines#40, 5475 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 5476 use=news-old-unk, 5477# 5478# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) 5479nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, 5480 OTbs, 5481 lines#31, 5482 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 5483 use=news-old-unk, 5484# 5485# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) 5486# also the alias vt100-bm. 5487nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, 5488 OTbs, 5489 lines#33, 5490 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, 5491 use=news-old-unk, 5492# 5493# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) 5494nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, 5495 OTbs, 5496 lines#31, 5497 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 5498 use=news-old-unk, 5499# 5500# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) 5501news28|sony vt100 emulator 28 lines, 5502 OTbs, 5503 lines#28, 5504 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, 5505 use=news-old-unk, 5506# 5507# (news29: this had :TY=ascii:KB=nws1200:\ --esr) 5508news29|news28-a|sony vt100 emulator 29 lines, 5509 lines#29, 5510 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, 5511 use=news-old-unk, 5512# 5513# (news511: this had :TY=sjis: --esr) 5514nwp511|nwp-511|nwp-511 vt100, 5515 OTbs, OTpt, am, xenl, 5516 cols#80, lines#24, 5517 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5518 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 5519 ed=\E[J$<30/>, el=\E[K$<3/>, 5520 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 5521 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, 5522 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 5523 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, 5524 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 5525 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 5526 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 5527# (news517: this had :TY=sjis:. --esr) 5528nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, 5529 eslok, hs, 5530 cols#80, lines#30, 5531 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 5532 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 5533 tsl=\E[1$}\E[;%df, use=vt200, 5534# (news517-w: this had :TY=sjis:. --esr) 5535nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, 5536 eslok, hs, 5537 cols#132, lines#50, 5538 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 5539 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 5540 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 5541 tsl=\E[1$}\E[;%df, use=vt200, 5542 5543#### Common Desktop Environment 5544# 5545 5546# This ships with Sun's CDE in Solaris 2.5 5547# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net> 5548dtterm|CDE desktop terminal, 5549 am, mir, msgr, xenl, xon, 5550 cols#80, it#8, lines#24, lm#0, ncv@, 5551 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5552 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5553 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 5554 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5555 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5556 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5557 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5558 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5559 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, 5560 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 5561 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, 5562 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5563 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 5564 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 5565 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 5566 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 5567 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5568 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 5569 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 5570 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, 5571 sc=\E7, 5572 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 5573 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 5574 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, 5575 5576#### Non-Unix Consoles 5577# 5578 5579#### EMX termcap.dat compatibility modes 5580# 5581# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the 5582# no_color_video to inform the application that standout(1), underline(2) 5583# reverse(4) and invisible(64) don't work with color. 5584emx-base|DOS special keys, 5585 bce, bw, 5586 it#8, ncv#71, 5587 bel=^G, use=ansi.sys, 5588 5589# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, 5590# a Unix-style environment used on OS/2. (Note that the suffix makes some 5591# names longer than 14 characters, the nominal maximum). 5592# 5593# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. 5594ansi-emx|ANSI.SYS color, 5595 am, bce, eo, mir, msgr, xon, 5596 colors#8, cols#80, it#8, lines#25, pairs#64, 5597 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5598 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 5599 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 5600 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 5601 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 5602 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, 5603 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, 5604 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, 5605 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5606 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, 5607 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, 5608 u9=\E[c, use=emx-base, 5609# nice colors for Emacs (white on blue, mode line white on cyan) 5610ansi-color-2-emx|ANSI.SYS color 2, 5611 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, 5612 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, 5613 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, 5614 smul=\E[1;36;44m, use=ansi-emx, 5615# nice colors for Emacs (white on black, mode line black on cyan) 5616ansi-color-3-emx|ANSI.SYS color 3, 5617 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, 5618 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, 5619 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, 5620 smul=\E[0;36;40m, use=ansi-emx, 5621mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, 5622 am, 5623 cols#80, it#8, lines#24, 5624 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5625 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5626 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 5627 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 5628 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 5629 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, 5630 sgr0=\E[0m, 5631 5632# Use this for cygwin32 (tested with beta 19.1) 5633# underline is colored bright magenta 5634# shifted kf1-kf12 are kf11-kf22 5635cygwinB19|ansi emulation for cygwin32, 5636 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5637 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 5638 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 5639 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 5640 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 5641 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5642 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, 5643 use=ansi.sys, 5644 5645# Use this for cygwin (tested with version 1.1.0). 5646# I've combined pcansi and linux. Some values of course were different and 5647# I've indicated which of these were and which I used. 5648# Cheers, earnie_boyd@yahoo.com 5649# several changes based on running with tack and comparing with older entry -TD 5650# more changes from csw: 5651# add cbt [backtab] 5652# remove eo [erase overstrike with blank] 5653# change clear was \E[H\E[J now \E[2J (faster?) 5654# remove cols 5655# remove lines 5656# remove ncv#3 [colors collide with highlights, bitmask] not applicable 5657# to MSDOS box? 5658# add cub [cursor back param] 5659# add cuf [cursor forward param] 5660# add cuu [cursor up param] 5661# add cud [cursor down param] 5662# add hs [has status line] 5663# add fsl [return from status line] 5664# add tsl [go to status line] 5665# add smacs [Start alt charset] (not sure if this works) 5666# add rmacs [End alt charset] (ditto) 5667# add smcup [enter_ca_mode] (save console; thanks Corinna) 5668# add rmcup [exit_ca_mode] (restore console; thanks Corinna) 5669# add kb2 [center of keypad] 5670# add u8 [user string 8] \E[?6c 5671# add el [clear to end of line] \E[K 5672# Notes: 5673# cnorm [make cursor normal] not implemented 5674# flash [flash] not implemented 5675# blink [blink] not implemented very usefully in cygwin? \E[5m 5676# dim [dim] not implemented very usefully in cygwin? \E[2m 5677# cub1 [cursor back 1] typically \E[D, but ^H is faster? 5678# kNXT [shifted next key] not implemented 5679# kPRV [shifted prev key] not implemented 5680# khome [home key] really is \E[1~ NOT \E[H 5681# tbc [clear tab stops] not implemented 5682# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni 5683# smpch [Start PC charset] is \E[11m, same as smacs 5684# rmpch [End PC charset] is \E[10m, same as rmacs 5685# mir [move in insert mode] fails in tack? 5686# bce [back color erase] causes problems with change background color? 5687# cvvis [make cursor very visible] causes a stackdump when testing with 5688# testcurs using the output option? \E[?25h\E[?8c 5689# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c 5690# ech [erase characters param] broken \E[%p1%dX 5691# kcbt [back-tab key] not implemented in cygwin? \E[Z 5692# 5693# 2005/11/12 -TD 5694# Remove cbt since it does not work in current cygwin 5695# Add 'mir' and 'in' flags based on tack 5696cygwin|ansi emulation for Cygwin, 5697 am, hs, mir, msgr, xon, 5698 colors#8, it#8, pairs#64, 5699 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5700 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, 5701 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5702 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5703 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5704 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, 5705 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 5706 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, 5707 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5708 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 5709 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 5710 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 5711 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 5712 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5713 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 5714 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 5715 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 5716 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, 5717 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5718 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 5719 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, 5720 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, 5721 vpa=\E[%i%p1%dd, use=vt102+enq, 5722 5723# I've supplied this so that you can help test new values and add other 5724# features. Cheers, earnie_boyd@yahoo.com. 5725# 5726# Some features are from pcansi. The op value is from linux. Function-keys 5727# are from linux. These have been tested not to cause problems. xenl was in 5728# this list, but DOES cause problems so it has been removed 5729cygwinDBG|Debug Version for Cygwin, 5730 am, eo, mir, msgr, xon, 5731 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 5732 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5733 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 5734 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 5735 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5736 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5737 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5738 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 5739 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, 5740 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 5741 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, 5742 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 5743 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 5744 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 5745 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 5746 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 5747 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 5748 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 5749 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, 5750 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, 5751 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 5752 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5753 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 5754 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 5755 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, 5756 5757# Key definitions: 5758# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the 5759# encodings used by other x86 environments. All others are invented for DJGPP. 5760# Oddly enough, while several combinations of modifiers are tabulated, there is 5761# none for shifted cursor keys. 5762# 5763# F1 \E[[A 5764# F2 \E[[B 5765# F3 \E[[C 5766# F4 \E[[D 5767# F5 \E[[E 5768# F6 \E[17~ 5769# F7 \E[18~ 5770# F8 \E[19~ 5771# F9 \E[20~ 5772# F10 \E[21~ 5773# F11 \E[23~ 5774# F12 \E[24~ 5775# 5776# Delete \E[3~ 5777# Down Arrow \E[B 5778# End \E[4~ 5779# Home \E[1~ 5780# Insert \E[2~ 5781# Left Arrow \E[D 5782# Page Down \E[6~ 5783# Page Up \E[5~ 5784# Right Arrow \E[C 5785# Up Arrow \E[A 5786# 5787# Shift-F1 \E[25~ 5788# Shift-F2 \E[26~ 5789# Shift-F3 \E[27~ 5790# Shift-F4 \E[28~ 5791# Shift-F5 \E[29~ 5792# Shift-F6 \E[30~ 5793# Shift-F7 \E[31~ 5794# Shift-F8 \E[32~ 5795# Shift-F9 \E[33~ 5796# Shift-F10 \E[34~ 5797# Shift-F11 \E[35~ 5798# Shift-F12 \E[36~ 5799# 5800# Ctrl-F1 \E[47~ 5801# Ctrl-F2 \E[48~ 5802# Ctrl-F3 \E[49~ 5803# Ctrl-F4 \E[50~ 5804# Ctrl-F5 \E[51~ 5805# Ctrl-F6 \E[52~ 5806# Ctrl-F7 \E[53~ 5807# Ctrl-F8 \E[54~ 5808# Ctrl-F9 \E[55~ 5809# Ctrl-F10 \E[56~ 5810# Ctrl-F11 \E[57~ 5811# Ctrl-F12 \E[58~ 5812# 5813# Ctrl-Delete \E[43~ 5814# Ctrl-Down Arrow \E[38~ 5815# Ctrl-End \E[44~ 5816# Ctrl-Home \E[41~ 5817# Ctrl-Insert \E[42~ 5818# Ctrl-Left Arrow \E[39~ 5819# Ctrl-Page Down \E[46~ 5820# Ctrl-Page Up \E[45~ 5821# Ctrl-Right Arrow \E[40~ 5822# Ctrl-Up Arrow \E[37~ 5823# 5824# Alt-F1 \E[59~ 5825# Alt-F2 \E[60~ 5826# Alt-F3 \E[61~ 5827# Alt-F4 \E[62~ 5828# Alt-F5 \E[63~ 5829# Alt-F6 \E[64~ 5830# Alt-F7 \E[65~ 5831# Alt-F8 \E[66~ 5832# Alt-F9 \E[67~ 5833# Alt-F10 \E[68~ 5834# Alt-F11 \E[79~ 5835# Alt-F12 \E[80~ 5836# 5837# Alt-Delete \E[65~ 5838# Alt-Down Arrow \E[60~ 5839# Alt-End \E[66~ 5840# Alt-Home \E[41~ 5841# Alt-Insert \E[64~ 5842# Alt-Left Arrow \E[61~ 5843# Alt-Page Down \E[68~ 5844# Alt-Page Up \E[67~ 5845# Alt-Right Arrow \E[62~ 5846# Alt-Up Arrow \E[59~ 5847# 5848# Also: 5849# Alt-A \E[82~ 5850# Alt-B \E[82~ 5851# Alt-C \E[83~ 5852# Alt-D \E[84~ 5853# Alt-E \E[85~ 5854# Alt-F \E[86~ 5855# Alt-G \E[87~ 5856# Alt-H \E[88~ 5857# Alt-I \E[89~ 5858# Alt-J \E[90~ 5859# Alt-K \E[91~ 5860# Alt-L \E[92~ 5861# Alt-M \E[93~ 5862# Alt-N \E[94~ 5863# Alt-O \E[95~ 5864# Alt-P \E[96~ 5865# Alt-Q \E[97~ 5866# Alt-R \E[98~ 5867# Alt-S \E[99~ 5868# Alt-T \E[100~ 5869# Alt-U \E[101~ 5870# Alt-V \E[102~ 5871# Alt-W \E[103~ 5872# Alt-X \E[104~ 5873# Alt-Y \E[105~ 5874# Alt-Z \E[106~ 5875djgpp|ansi emulation for DJGPP alpha, 5876 am, bce, msgr, xhp, xon, xt, 5877 colors#8, it#8, pairs#64, 5878 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5879 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5880 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, 5881 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5882 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5883 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5884 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5885 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 5886 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 5887 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, 5888 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 5889 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 5890 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 5891 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5892 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, 5893 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, 5894 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5895 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, 5896 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 5897 5898djgpp203|Entry for DJGPP 2.03, 5899 OTbs, am, 5900 cols#80, it#8, lines#25, 5901 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 5902 kcud1=^J, nel=^M^J, 5903 5904djgpp204|Entry for DJGPP 2.04, 5905 OTbs, am, AX, 5906 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, 5907 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5908 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, 5909 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5910 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5911 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, 5912 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 5913 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 5914 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, 5915 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5916 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, 5917 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 5918 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 5919 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, 5920 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, 5921 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 5922 5923# This is tested using U/Win's telnet. Scrolling is omitted because it is 5924# buggy. Another odd bug appears when displaying "~" in alternate character 5925# set (the emulator spits out error messages). Compare with att6386 -TD 5926uwin|U/Win 3.2 console, 5927 am, eo, in, msgr, xenl, xon, 5928 colors#8, it#8, ncv#58, pairs#64, 5929 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5930 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5931 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 5932 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 5933 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 5934 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, 5935 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, 5936 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, 5937 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, 5938 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, 5939 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, 5940 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, 5941 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 5942 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 5943 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, 5944 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 5945 5946# This entry fits the Windows NT console when the _POSIX_TERM environment 5947# variable is set to 'on'. While the Windows NT POSIX console is seldom used, 5948# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP 5949# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating 5950# systems is not, and (surprise!) they match very well. 5951# 5952# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up 5953# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only 5954# are the installation instructions a pile of mind-numbing bureaucratese, 5955# but the termcap entry is actually broken and unusable as given; the :do: 5956# capability is misspelled "d". 5957# 5958# To use this, you need to a bunch of environment variables: 5959# 5960# SET _POSIX_TERM=on 5961# SET TERM=ansi 5962# SET TERMCAP=location of termcap file in POSIX file format 5963# which is case-sensitive. 5964# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap 5965# SET TMP=//C/TEMP 5966# 5967# Important note: setting the TMP environment variable in POSIX style renders 5968# it incompatible with a lot of other applications, including Visual C++. So 5969# you should have a separate command window just for vi. All the other 5970# variables may be permanently set in the Control Panel\System applet. 5971# 5972# You can find out more about the restrictions of this facility at 5973# <http://www.nentug.org/unix-to-nt/ntposix.htm>. 5974# 5975# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997 5976ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 5977 am, bw, msgr, 5978 cols#80, it#8, lines#25, 5979 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5980 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 5981 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 5982 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 5983 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 5984# From: jew@venus.sunquest.com 5985# Date: 19 Feb 93 23:41:07 GMT 5986# Here's a combination of ansi and vt100 termcap 5987# entries that works nearly perfectly for me 5988# (Gateway 2000 Handbook and Microsoft Works 3.0): 5989pcmw|PC running Microsoft Works, 5990 am, xenl, 5991 cols#80, it#8, lines#24, vt#3, 5992 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 5993 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, 5994 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 5995 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 5996 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, 5997 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 5998 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, 5999 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, 6000 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 6001 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6002 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 6003 tbc=\E[3g$<2/>, 6004 6005# From: Federico Bianchi 6006# This is the entry for the OpenNT terminal. 6007# The ntconsole name is for backward compatability. 6008# This is for OpenNT 2.0 and later. 6009# Later OpenNT was renamed to Interix. 6010# 6011# Presently it is distributed by Microsoft as Services For Unix (SFU). 6012# The 3.5 beta contains ncurses 4.2 (that is header files and executables, 6013# the documentation dates from 1.9.9e) -TD 6014 6015interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, 6016 am, bw, msgr, 6017 colors#8, cols#80, lines#25, ncv#3, pairs#64, 6018 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6019 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, 6020 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 6021 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 6022 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 6023 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 6024 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 6025 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, 6026 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, 6027 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, 6028 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, 6029 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, 6030 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, 6031 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, 6032 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, 6033 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, 6034 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, 6035 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, 6036 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, 6037 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, 6038 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, 6039 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, 6040 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 6041 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, 6042 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6043 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, 6044 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m, 6045 6046opennt-35|ntconsole-35|OpenNT-term35 compatible with color, 6047 lines#35, use=opennt, 6048 6049opennt-50|ntconsole-50|OpenNT-term50 compatible with color, 6050 lines#50, use=opennt, 6051 6052opennt-60|ntconsole-60|OpenNT-term60 compatible with color, 6053 lines#60, use=opennt, 6054 6055opennt-100|ntconsole-100|OpenNT-term100 compatible with color, 6056 lines#100, use=opennt, 6057 6058# OpenNT wide terminals 6059opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, 6060 cols#125, use=opennt, 6061 6062opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, 6063 lines#35, use=opennt-w, 6064 6065opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, 6066 lines#50, use=opennt-w, 6067 6068opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, 6069 lines#60, use=opennt-w, 6070 6071opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, 6072 cols#132, use=opennt, 6073 6074# OpenNT terminals with no smcup/rmcup (names match termcap entries) 6075interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, 6076 rmcup@, smcup@, use=opennt, 6077 6078opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, 6079 lines#35, use=opennt-nti, 6080 6081opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, 6082 lines#50, use=opennt-nti, 6083 6084opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, 6085 lines#60, use=opennt-nti, 6086 6087opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, 6088 lines#100, use=opennt-nti, 6089 6090######## COMMON TERMINAL TYPES 6091# 6092# This section describes terminal classes and maker brands that are still 6093# quite common, but have proprietary command sets not blessed by ANSI. 6094# 6095 6096#### Altos 6097# 6098# Altos made a moderately successful line of UNIX boxes. In 1990 they were 6099# bought out by Acer, a major Taiwanese manufacturer of PC-clones. 6100# Acer has a web site at http://www.acer.com. 6101# 6102# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 6103# His comments suggest they were shipped with the system. 6104# 6105 6106# (altos2: had extension capabilities 6107# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6108# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6109# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6110# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6111# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6112# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ 6113# :HL=^AP\r:SP=\E[i:\ 6114# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 6115# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ 6116# Comparison with the k* capabilities makes it obvious that the c* things are 6117# shift keys. I have renamed them to keys 32 and up accordingly. Also, 6118# :sr: was given as a boolean-- esr) 6119altos2|alt2|altos-2|altos II, 6120 cols#80, it#8, lines#24, xmc#0, 6121 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, 6122 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, 6123 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 6124 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, 6125 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, 6126 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 6127 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, 6128 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6129 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6130 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6131 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6132 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, 6133 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 6134 smam=\E[?7h, smso=\E[7m, smul=\E[4m, 6135# (altos3: had extension capabilities 6136# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6137# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6138# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6139# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6140# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6141# :HL=^AP\r:SP=\E[i:\ 6142# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: 6143altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, 6144 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, 6145altos4|alt4|altos-4|altos IV, 6146 use=wy50, 6147# (altos7: had extension capabilities: 6148# :GG#0:GI=\EH8:GF=\EH7:\ 6149# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6150# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6151# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6152# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6153# Comparison with the k* capabilities makes it obvious that the c* things are 6154# shift keys. I have renamed them to keys 32 and up accordingly. I have 6155# also made this entry relative to adm12 in order to give it an <sgr>. The 6156# <invis> imported by use=adm+sgr may work, let me know. -- esr) 6157altos7|alt7|altos VII, 6158 am, mir, 6159 cols#80, lines#24, xmc#0, 6160 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, 6161 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6162 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6163 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, 6164 ind=^J, invis=\EG1, 6165 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, 6166 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, 6167 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, 6168 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6169 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6170 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6171 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6172 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, 6173 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, 6174 rmir=\Er, smir=\Eq, use=adm+sgr, 6175altos7pc|alt7pc|altos PC VII, 6176 kend=\ET, use=altos7, 6177 6178#### Hewlett-Packard (hp) 6179# 6180# Hewlett-Packard 6181# 8000 Foothills Blvd 6182# Roseville, CA 95747 6183# Vox: 1-(916)-785-4363 (Technical response line for VDTs) 6184# 1-(800)-633-3600 (General customer support) 6185# 6186# 6187# As of March 1998, HP no longer has any terminals in production. 6188# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 6189# supported (they still have parts). So are the 2392a and 2394a. 6190# See the WORKSTATION CONSOLES section for the 700s. 6191# 6192 6193# Generic HP terminal - this should (hopefully) work on any HP terminal. 6194hpgeneric|hp|hewlett-packard generic terminal, 6195 OTbs, OTpt, am, da, db, mir, xhp, 6196 cols#80, lines#24, lm#0, vt#6, 6197 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6198 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, 6199 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 6200 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, 6201 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, 6202 vpa=\E&a%p1%dY, 6203 6204hp110|hewlett-packard model 110 portable, 6205 lines#16, use=hpgeneric, 6206 6207hp+pfk+cr|hp function keys with CR, 6208 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, 6209 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, 6210 6211hp+pfk-cr|hp function keys w/o CR, 6212 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, 6213 kf8=\Ew, 6214 6215# The hp2621s use the same keys for the arrows and function keys, 6216# but not separate escape sequences. These definitions allow the 6217# user to use those keys as arrow keys rather than as function 6218# keys. 6219hp+pfk+arrows|hp alternate arrow definitions, 6220 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, 6221 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, 6222 kll=\Eq\r, kri=\Es\r, 6223 6224hp+arrows|hp arrow definitions, 6225 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6226 kind=\ES, kll=\EF, kri=\ET, 6227 6228# Generic stuff from the HP 262x series 6229# 6230hp262x|HP 262x terminals, 6231 xhp, 6232 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, 6233 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6234 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 6235 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, 6236 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 6237 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, 6238 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, 6239 6240# Note: no <home> on HPs since that homes to top of memory, not screen. 6241# Due to severe 2621 braindamage, the only way to get the arrow keys to 6242# transmit anything at all is to turn on the function key labels 6243# with <smkx>, and even then the user has to hold down shift! 6244# The default 2621 turns off the labels except when it has to to 6245# enable the function keys. If your installation prefers labels 6246# on all the time, or off all the time (at the "expense" of the 6247# function keys), use 2621-nl or 2621-wl. 6248# 6249# Note: there are newer ROMs for 2621's that allow you to set 6250# strap A so the regular arrow keys xmit \EA, etc, as with the 6251# 2645. However, even with this strap set, the terminal stops 6252# xmitting if you reset it, until you unset and reset the strap! 6253# Since there is no way to set/unset the strap with an escape 6254# sequence, we don't use it in the default. 6255# If you like, you can use 2621-ba (brain-damaged arrow keys). 6256hp2621-ba|2621 w/new rom and strap A set, 6257 rmkx@, smkx@, use=hp+arrows, use=hp2621, 6258 6259# hp2621 with function labels. Most of the time they are off, 6260# but inside vi, the function key labels appear. You have to 6261# hold down shift to get them to xmit. 6262hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, 6263 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, 6264hp2621-fl|hp 2621, 6265 xhp@, xon, 6266 pb#19200, 6267 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, 6268 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, 6269 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, 6270 use=hp+pfk+cr, use=hpgeneric, 6271 6272# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p 6273hp2621p|hp 2621 with printer, 6274 mc4=\E&p13C, mc5=\E&p11C, use=hp2621, 6275 6276hp2621p-a|hp2621p with fn as arrows, 6277 use=hp+pfk+arrows, use=hp2621p, 6278 6279# hp2621 with k45 keyboard 6280hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, 6281 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 6282 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, 6283 6284# 2621 using all 48 lines of memory, only 24 visible at any time. 6285hp2621-48|48 line 2621, 6286 lines#48, 6287 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, 6288 use=hp2621, 6289 6290# 2621 with no labels ever. Also prevents vi delays on escape. 6291hp2621-nl|hp 2621 with no labels, 6292 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, 6293 use=hp2621-fl, 6294 6295# Needed for UCB ARPAVAX console, since lsi-11 expands tabs 6296# (wrong). 6297# 6298hp2621-nt|hp 2621 w/no tabs, 6299 ht@, use=hp2621, 6300 6301# Hp 2624 B with 4 or 10 pages of memory. 6302# 6303# Some assumptions are made with this entry. These settings are 6304# NOT set up by the initialization strings. 6305# 6306# Port Configuration 6307# RecvPace=Xon/Xoff 6308# XmitPace=Xon/Xoff 6309# StripNulDel=Yes 6310# 6311# Terminal Configuration 6312# InhHndShk=Yes 6313# InhDC2=Yes 6314# XmitFnctn(A)=No 6315# InhEolWrp=No 6316# 6317# Note: the 2624 DOES have a true <home>, believe it or not! 6318# 6319# The 2624 has an "error line" to which messages can be sent. 6320# This is CLOSE to what is expected for a "status line". However, 6321# after a message is sent to the "error line", the next carriage 6322# return is EATEN and the "error line" is turned back off again! 6323# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. 6324# 6325# This entry supports emacs (and any other program that uses raw 6326# mode) at 4800 baud and less. I couldn't get the padding right 6327# for 9600. 6328# 6329# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) 6330hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, 6331 da, db, 6332 lm#96, 6333 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, 6334 use=hp+labels, use=scrhp, 6335 6336# This hp2626 entry does not use any of the fancy windowing stuff 6337# of the 2626. 6338# 6339# Indeed, terminfo does not yet handle such stuff. Since changing 6340# any window clears memory, it is probably not possible to use 6341# this for screen opt. 6342# 6343# ed is incredibly slow most of the time - I am guessing at the 6344# exact padding. Since the terminal uses xoff/xon this is intended 6345# only for cost computation, so that the terminal will prefer el 6346# or even dl1 which is probably faster! 6347# 6348# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 6349# extra slow on the last line of the window. 6350# 6351# The padding probably should be changed. 6352# 6353hp2626|hp2626a|hp2626p|hp 2626, 6354 da, db, 6355 lm#0, pb#19200, 6356 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, 6357 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr, 6358 use=hp+labels, use=scrhp, 6359 6360# This entry is for sysline. It allocates a 23 line window with 6361# a 115 line workspace for regular use, and a 1 line window for 6362# the status line. 6363# 6364# This assumes port 2 is being used. 6365# Turn off horizontal line, Create ws #1 with 115 lines, 6366# Create ws #2 with 1 line, Create window #1 lines 1-23, 6367# Create window #2 lines 24-24, Attach cursor to workspace #1. 6368# Note that this clears the tabs so it must be done by tset before 6369# it sets the tabs. 6370# 6371hp2626-s|hp 2626 using only 23 lines, 6372 eslok, hs, 6373 lines#23, 6374 fsl=\E&d@\E&w7f2p1I\E&w4f1I, 6375 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, 6376 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, 6377# Force terminal back to 24 lines after being 23. 6378hp2626-ns|hp 2626 using all 24 lines, 6379 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, 6380 use=hp2626, 6381# Various entries useful for small windows on 2626. 6382hp2626-12|hewlett-packard 2626 12 lines, 6383 lines#12, use=hp2626, 6384hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, 6385 cols#40, lines#12, use=hp2626, 6386hp2626-x40|hewlett-packard 2626 40 columns, 6387 cols#40, use=hp2626, 6388hp2626-12-s|hewlett-packard 2626 11 lines plus status, 6389 lines#11, use=hp2626-s, 6390 6391# 6392# hp2627 color tubes from University of Wisconsin 6393# 6394hp2627a-rev|hp 2627 with reverse video colors, 6395 cr=^M, cud1=^J, ht=^I, ind=^J, 6396 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, 6397 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, 6398 smul=\E&dD\E&v1S, use=hp2621-nl, 6399hp2627a|hp 2627 color terminal with no labels, 6400 cr=^M, cud1=^J, ht=^I, ind=^J, 6401 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 6402 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, 6403 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, 6404 use=hp2621-nl, 6405hp2627c|hp 2627 color (cyan) terminal with no labels, 6406 cr=^M, cud1=^J, ht=^I, ind=^J, 6407 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 6408 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, 6409 6410# hp2640a doesn't have the Y cursor addressing feature, and C is 6411# memory relative instead of screen relative, as we need. 6412# 6413hp2640a|hp 2640a, 6414 cup@, rmkx@, smkx@, use=hp2645, 6415 6416hp2640b|hp2644a|hp 264x series, 6417 rmkx@, smkx@, use=hp2645, 6418 6419# (hp2641a: removed unknown :gu: -- esr) 6420hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 6421 am, da, db, mir, xhp, 6422 cols#80, lines#24, 6423 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6424 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 6425 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 6426 if=/usr/share/tabset/std, il1=\EL, ind=^J, 6427 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6428 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 6429 vpa=\E&a%p1%2dY, 6430 6431# This terminal should be used at 4800 baud or less. It needs padding for 6432# plain characters at 9600, I guessed at an appropriate cr delay. It really 6433# wants ^E/^F handshaking, but that doesn't work well even if you write 6434# software to support it. 6435hp2645|hp45|HP 2645 series, 6436 pb#9600, 6437 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, 6438 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6439 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, 6440 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, 6441 rmkx=\E&s0A, 6442 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, 6443 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, 6444# You should use this terminal at 4800 baud or less. 6445hp2648|hp2648a|HP 2648a graphics terminal, 6446 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, 6447 dch1=\EP$<7>, ip=$<5>, use=hp2645, 6448 6449# The HP 150 terminal is a fairly vanilla HP terminal, with the 6450# clreol standout problem. It also has graphics capabilities and 6451# a touch screen, which we don't describe here. 6452hp150|hewlett packard Model 150, 6453 OTbs, use=hp2622, 6454 6455# HP 2382a terminals, "the little ones." They don't have any 6456# alternate character set support and sending out ^N/^O will 6457# leave the screen blank. 6458hp2382a|hp2382|hewlett packard 2382a, 6459 da, db, 6460 lh#1, lm#48, 6461 acsc@, 6462 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 6463 rmacs@, 6464 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, 6465 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, 6466 6467hp2621-a|hp2621a-a|hp2621 with fn as arrows, 6468 use=hp+pfk+arrows, use=hp2621-fl, 6469 6470# newer hewlett packard terminals 6471 6472newhpkeyboard|generic entry for HP extended keyboard, 6473 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6474 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 6475 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, 6476 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, 6477 use=hp+pfk-cr, 6478 6479newhp|generic entry for new hewlett packard terminals, 6480 am, bw, mir, xhp, xon, 6481 cols#80, lines#24, pb#4800, 6482 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., 6483 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, 6484 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, 6485 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, 6486 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, 6487 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, 6488 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, 6489 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, 6490 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, 6491 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, 6492 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, 6493 tbc=\E3, use=newhpkeyboard, 6494 6495memhp|memory relative addressing for new HP ttys, 6496 vt#6, 6497 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, 6498 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, 6499 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, 6500 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, 6501 6502scrhp|screen relative addressing for new HP ttys, 6503 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, 6504 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, 6505 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, 6506 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, 6507 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, 6508 6509# (hp+labels: added label values from a BRL termcap -- esr) 6510hp+labels|"standard" label info for new HP ttys, 6511 lh#2, lw#8, nlab#8, 6512 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 6513 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 6514 rmln=\E&j@, smln=\E&jB, 6515 6516hp+printer|"standard" printer info for HP ttys, 6517 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, 6518 6519 6520# The new hp2621b is kind of a cross between the old 2621 and the 6521# new 262x series of machines. It has dip-switched options. 6522# The firmware has a bug in it such that if you give it a null 6523# length label, the following character is eaten! 6524hp2621b|hp 2621b with old style keyboard, 6525 lh#1, lm#48, lw#8, nlab#8, 6526 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6527 kind=\ET, kll=\EF, kri=\ES, 6528 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, 6529 smln=\E&jB, use=hp2621, 6530 6531hp2621b-p|hp 2621b with printer, 6532 use=hp+printer, use=hp2621b, 6533 6534# hp2621b - new 2621b with new extended keyboard 6535# these are closer to the new 26xx series than the other 2621b 6536hp2621b-kx|hp 2621b with extended keyboard, 6537 use=newhpkeyboard, use=hp2621b, 6538 6539hp2621b-kx-p|hp 2621b with new keyboard & printer, 6540 use=hp+printer, use=hp2621b-kx, 6541 6542# Some assumptions are made in the following entries. 6543# These settings are NOT set up by the initialization strings. 6544# 6545# Port Configuration 6546# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes 6547# 6548# Terminal Configuration 6549# InhHndShk(G)=Yes InhDC2(H)=Yes 6550# XmitFnctn(A)=No InhEolWrp=No 6551# 6552# 6553# Hp 2622a & hp2623a display and graphics terminals 6554# 6555hp2622|hp2622a|hp 2622, 6556 da, db, 6557 lm#0, pb#19200, 6558 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, 6559 6560# The 2623 is a 2622 with extra graphics hardware. 6561hp2623|hp2623a|hp 2623, 6562 use=hp2622, 6563 6564hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, 6565 use=hp+printer, use=hp2624, 6566 6567# The hewlett packard B can have an optional extra 6 pages of memory. 6568hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, 6569 lm#240, use=hp2624, 6570 6571hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, 6572 lm#240, use=hp2624b-p, 6573 6574# Color manipulations for HP terminals 6575hp+color|hp with colors, 6576 ccc, 6577 colors#16, ncv#17, pairs#7, 6578 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, 6579 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, 6580 op=\E&v0S, scp=\E&v%p1%dS, 6581 6582# <is2> sets the screen to be 80 columns wide 6583hp2397a|hp2397|hewlett packard 2397A color terminal, 6584 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, 6585 6586# HP 700/44 Setup parameters: 6587# Terminal Mode HP-PCterm 6588# Inhibit Auto Wrap NO 6589# Status Line Host Writable 6590# PC Character Set YES 6591# Twenty-Five Line Mode YES 6592# XON/XOFF @128 or 64 (sc) 6593# Keycode Mode NO or YES (sc) 6594# Backspace Key BS or BS/DEL 6595# 6596# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 6597# \E\\? does not turn off keycode mode 6598# <smsc> sets alternate start/stop; keycode on 6599hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, 6600 am, eo, xenl, xon, 6601 cols#80, lines#25, 6602 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 6603 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, 6604 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 6605 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 6606 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 6607 ind=^J, 6608 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 6609 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 6610 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 6611 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, 6612 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, 6613 kpp=\E[5~, rmam=\E[?7l, 6614 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, 6615 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 6616 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, 6617 smul=\E[4m, xoffc=g, xonc=e, 6618# 6619# (hp2392: copied <rmir> here from hpex -- esr) 6620hp2392|239x series, 6621 cols#80, 6622 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, 6623 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, 6624 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, 6625 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, 6626 use=hpsub, 6627 6628hpsub|hp terminals -- capability subset, 6629 am, da, db, mir, xhp, xon, 6630 lines#24, 6631 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 6632 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 6633 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, 6634 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, 6635 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, 6636 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, 6637 6638# hpex: 6639# May be used for most 24 x 80 hp terminals, 6640# but has no padding added, so may allow runover in some terminals at high 6641# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and 6642# hp98x5 terminal emulators or hp98x6 consoles. 6643# Adds xy-cursor addressing, vertical cursor addressing, home, 6644# last line, and underline capabilities. 6645# 6646# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", 6647# moved <rmir> here from hpsub -- esr) 6648hpex|hp extended capabilites, 6649 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, 6650 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, 6651 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, 6652 6653# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996 6654hp2|hpex2|hewlett-packard extended capabilities newer version, 6655 am, da, db, mir, xhp, 6656 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, 6657 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 6658 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6659 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6660 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 6661 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6662 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 6663 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 6664 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 6665 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 6666 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 6667 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 6668 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 6669 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, 6670 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 6671 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 6672 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, 6673 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6674 6675# HP 236 console 6676# From: <ddavis@ic.berkeley.edu> 6677hp236|hp236 internal terminal emulator, 6678 OTbs, am, 6679 cols#80, lines#24, 6680 clear=\EF, cnorm=\EDE, cub1=^H, 6681 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, 6682 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, 6683 sgr0=\ECI, smso=\EBI, 6684 6685# This works on a hp300 console running Utah 4.3 BSD 6686# From: Craig Leres <leres@okeeffe.berkeley.edu> 6687hp300h|HP Catseye console, 6688 OTbs, am, da, db, mir, xhp, 6689 cols#128, lines#51, lm#0, xmc#0, 6690 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 6691 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6692 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, 6693 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, 6694 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6695 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, 6696 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 6697 vpa=\E&a%p1%dY, 6698# From: Greg Couch <gregc@ernie.berkeley.edu> 6699hp9837|hp98720|hp98721|HP 9000/300 workstations, 6700 OTbs, am, da, db, mir, xhp, 6701 cols#128, it#8, lines#46, lm#0, 6702 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, 6703 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6704 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6705 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, 6706 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6707 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, 6708 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, 6709 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, 6710 tbc=\E3, vpa=\E&a%p1%dY, 6711# HP 9845 desktop computer from BRL 6712# (hp9845: removed unknown capability :gu: -- esr) 6713hp9845|HP 9845, 6714 OTbs, am, da, db, eo, mir, xhp, 6715 cols#80, lines#21, 6716 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 6717 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 6718 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, 6719 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 6720# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 6721# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; 6722# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) 6723hp98550|hp98550a|HP 9000 Series 300 color console, 6724 OTbs, am, da, db, mir, xhp, 6725 cols#128, it#8, lines#49, lm#0, 6726 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, 6727 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6728 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, 6729 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6730 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, 6731 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6732 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 6733 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 6734 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 6735 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, 6736 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 6737 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, 6738 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6739# From: Victor Duchovni <vic@fine.princeton.edu> 6740# (hp700-wy: removed obsolete ":nl=^J:"; 6741# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) 6742hp700-wy|HP700/41 emulating wyse30, 6743 OTbs, am, bw, mir, msgr, 6744 cols#80, it#8, lines#24, xmc#1, 6745 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 6746 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6747 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, 6748 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, 6749 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, 6750 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, 6751 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, 6752 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, 6753 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, 6754 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, 6755hp70092|hp70092a|hp70092A|HP 700/92, 6756 am, da, db, xhp, 6757 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, 6758 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, 6759 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, 6760 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 6761 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, 6762 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 6763 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6764 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 6765 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 6766 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 6767 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, 6768 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 6769 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 6770 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6771 6772bobcat|sbobcat|HP 9000 model 300 console, 6773 am, da, db, mir, xhp, 6774 cols#128, it#8, lines#47, xmc#0, 6775 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 6776 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, 6777 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, 6778 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 6779 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, 6780 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 6781 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, 6782gator-t|HP 9000 model 237 emulating extra-tall AAA, 6783 lines#94, use=gator, 6784gator|HP 9000 model 237 emulating AAA, 6785 bw, km, mir, ul, 6786 cols#128, it#8, lines#47, 6787 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, 6788 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 6789 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 6790 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, 6791 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, 6792 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6793 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, 6794 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6795gator-52|HP 9000 model 237 emulating VT52, 6796 cols#128, lines#47, use=vt52, 6797gator-52t|HP 9000 model 237 emulating extra-tall VT52, 6798 lines#94, use=gator-52, 6799 6800#### Honeywell-Bull 6801# 6802# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 6803# 6804 6805# Honeywell Bull terminal. Its cursor and function keys send single 6806# control characters and it has standout/underline glitch. Most programs 6807# do not like these features/bugs. Visual bell is realized by flashing the 6808# "keyboard locked" LED. 6809dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 6810 cols#80, lines#25, 6811 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, 6812 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, 6813 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, 6814 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, 6815dku7003|Honeywell Bull DKU 7003 all features described, 6816 msgr, 6817 xmc#1, 6818 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, 6819 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6820 use=dku7003-dumb, 6821 6822#### Lear-Siegler (adm) 6823# 6824# These guys are long since out of the terminals business, but 6825# in 1995 many current terminals still have an adm type as one of their 6826# emulations (usually their stupidest, and usually labeled adm3, though 6827# these `adm3' emulations normally have adm3a+ capabilities). 6828# 6829# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 6830# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') 6831# was being held to ground would trigger a send of the top line on the screen. 6832# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 6833# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>, 6834# for clearing up this point.) 6835 6836adm1a|adm1|lsi adm1a, 6837 am, 6838 cols#80, lines#24, 6839 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6840 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 6841 ind=^J, 6842adm2|lsi adm2, 6843 OTbs, am, 6844 cols#80, lines#24, 6845 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6846 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6847 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, 6848 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 6849# (adm3: removed obsolete ":ma=^K^P:" -- esr) 6850adm3|lsi adm3, 6851 OTbs, am, 6852 cols#80, lines#24, 6853 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, 6854# The following ADM-3A switch settings are assumed for normal operation: 6855# SPACE U/L_DISP CLR_SCRN 24_LINE 6856# CUR_CTL LC_EN AUTO_NL FDX 6857# Other switches may be set for operator convenience or communication 6858# requirements. I recommend 6859# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF 6860# ETX_OFF EOT_OFF 6861# Most of these terminals required an option ROM to support lower case display. 6862# Open the case and look at the motherboard; if you see an open 24-pin DIP 6863# socket, you may be out of luck. 6864# 6865# (adm3a: some capabilities merged in from BRl entry -- esr) 6866adm3a|lsi adm3a, 6867 OTbs, am, 6868 cols#80, lines#24, 6869 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, 6870 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6871 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, 6872 kcuu1=^K, rs2=^N, 6873adm3a+|adm3a plus, 6874 kbs=^H, use=adm3a, 6875# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) 6876adm5|lsi adm5, 6877 xmc#1, 6878 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, 6879 rmso=\EG, smso=\EG, use=adm3a+, 6880# A lot of terminals other than adm11s use these. Wherever you see 6881# use=adm+sgr with some of its capabilities disabled, try the 6882# disabled ones. They may well work but not have been documented or 6883# expressed in the using entry. We'd like to cook up an <sgr> but the 6884# <rmacs>/<smacs> sequences of the using entries vary too much. 6885adm+sgr|adm style highlight capabilities, 6886 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, 6887 smso=\EG4, smul=\EG8, 6888# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL 6889# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> 6890# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also 6891# be ^Z, according to his entry. 6892# (adm11: <smul>=\EG4 was obviously erroneous because it also said 6893# <rev>=\EG4. Looking at other ADMs confirms this -- esr) 6894adm11|LSI ADM-11, 6895 OTbs, am, hs, 6896 OTkn#8, cols#80, lines#24, 6897 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, 6898 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6899 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, 6900 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6901 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6902 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), 6903 use=adm+sgr, 6904# From: Andrew Scott Beals <bandy@lll-crg.ARPA> 6905# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 6906# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 6907# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had 6908# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> 6909# via BRL. That entry asserted <xmc#1>, but I've left that out because 6910# neither earlier nor later ADMSs have it -- esr) 6911# 6912# You will need to get into the supervisor setup before you can set 6913# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should 6914# see a lot more setup options. 6915# 6916# While in supervisor setup you can also use following codes: 6917# 6918# Ctrl-P Personality character selections (configure for example what 6919# arrow keys send, if I recall correctly) 6920# Ctrl-T tabs 1-80 use left&right to move and up to set and 6921# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor 6922# Ctrl-B Binary setup (probably not needed. I think that everything can 6923# be set using normal setup) 6924# Ctrl-A Answerback mode (enter answerback message) 6925# Ctrl-U User friendly mode (normal setup) 6926# Ctrl-D Defaults entire setup and function keys from EPROM tables 6927# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. 6928# Ctrl-R Reads both setup and functions keys from NVM. 6929# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status 6930# 6931# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to 6932# RTS/CTS used nowadays with virtually every modem and computer. 19200 6933# bps works fine with hardware flow control. 6934# 6935# The following null-modem cable should fix this and enable you to use 6936# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also 6937# set ADM-12+ for DTR handshaking from supervisor setup. 6938# 6939# PC Serial ADM-12+ 6940# -------- ------- 6941# 2 - 3 6942# 3 - 2 6943# 4 - 5 6944# 5 - 20 6945# 6,8 - 4 6946# 7 - 7 6947# 20 - 6,8 6948# 6949adm12|lsi adm12, 6950 OTbs, OTpt, am, mir, 6951 OTug#1, cols#80, it#8, lines#24, 6952 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6953 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6954 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 6955 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, 6956 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 6957 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 6958 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 6959 use=adm+sgr, 6960# (adm20: removed obsolete ":kn#7:" -- esr) 6961adm20|lear siegler adm20, 6962 OTbs, am, 6963 cols#80, it#8, lines#24, 6964 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, 6965 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, 6966 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, 6967 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 6968 sgr0=\E(, smso=\E), 6969adm21|lear siegler adm21, 6970 xmc#1, 6971 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, 6972 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, 6973 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, 6974 use=adm3a, 6975# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, 6976# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; 6977# removed bogus-looking \200 from before <cup>. -- esr) 6978adm22|lsi adm22, 6979 OTbs, am, 6980 cols#80, lines#24, 6981 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6982 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6983 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, 6984 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, 6985 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6986 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6987 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 6988 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), 6989# ADM 31 DIP Switches 6990# 6991# This information comes from two versions of the manual for the 6992# Lear-Siegler ADM 31. 6993# 6994# Main board: 6995# rear of case 6996# +-||||-------------------------------------+ 6997# + S1S2 ||S + 6998# + ||3 + 6999# + + 7000# + ||S + 7001# + ||4 + 7002# + + 7003# + + 7004# + + 7005# + + 7006# + + 7007# +-+ +-+ 7008# + + 7009# + S5 S6 S7 + 7010# + == == == + 7011# +----------------------------------------------+ 7012# front of case (keyboard) 7013# 7014# S1 - Data Rate - Modem 7015# S2 - Data Rate - Printer 7016# ------------------------ 7017# Data Rate Setting 7018# ------------------- 7019# 50 0 0 0 0 7020# 75 1 0 0 0 7021# 110 0 1 0 0 7022# 134.5 1 1 0 0 7023# 150 0 0 1 0 7024# 300 1 0 1 0 7025# 600 0 1 1 0 7026# 1200 1 1 1 0 7027# 1800 0 0 0 1 7028# 2000 1 0 0 1 7029# 2400 0 1 0 1 7030# 3600 1 1 0 1 7031# 4800 0 0 1 1 7032# 7200 1 0 1 1 7033# 9600 0 1 1 1 7034# x 1 1 1 1 7035# 7036# S3 - Interface/Printer/Attributes 7037# --------------------------------- 7038# Printer Busy Control 7039# sw1 sw2 sw3 7040# --------------- 7041# off off off Busy not active, CD disabled 7042# off off on Busy not active, CD enabled 7043# off on off Busy active on J5-20, CD disabled 7044# on off off Busy active on J5-19, CD disabled - Factory Set. 7045# on off on Busy active on J5-19, CD enabled 7046# 7047# sw4 Used in conjuction with S4 for comm interface control - Fact 0 7048# 7049# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 7050# 7051# sw6 ON enables printer BUSY active LOW - Factory Setting 7052# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses 7053# 7054# sw7 ON - steady cursor - Factory Setting 7055# OFF - blinking cursor 7056# 7057# sw8 ON causes selected attribute character to be displayed 7058# OFF causes SPACE to be displayed instead - Factory Setting 7059# 7060# S4 - Interface 7061# -------------- 7062# Modem Interface 7063# S3 S4 S4 S4 S4 7064# sw4 sw1 sw2 sw3 sw4 7065# --------------------------- 7066# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and 7067# Current Loop disabled - Factory Setting 7068# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect 7069# disabled 7070# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and 7071# Current Loop Disabled 7072# 7073# sw5 ON disables dot stretching mode - Factory Setting 7074# OFF enables dot stretching mode 7075# sw6 ON enables blanking function 7076# OFF enables underline function - Factory Setting 7077# sw7 ON causes NULLS to be displayed as NULLS 7078# OFF causes NULLS to be displayed as SPACES - Factory Setting 7079# 7080# S5 - Word Structure 7081# ------------------- 7082# sw1 ON enables BREAK key - Factory Setting 7083# OFF disables BREAK key 7084# sw2 ON selects 50Hz monitor refresh rate 7085# OFF selects 60Hz monitor refresh rate - Factory Setting 7086# 7087# Modem Port Selection 7088# sw3 sw4 sw5 7089# --------------- 7090# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits 7091# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits 7092# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. 7093# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit 7094# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits 7095# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit 7096# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit 7097# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit 7098# 7099# sw6 ON sends bit 8 a 1 (mark) 7100# OFF sends bit 8 as 0 (space) - Factory Setting 7101# sw7 ON selects Block Mode 7102# OFF selects Conversation Mode - Factory Setting 7103# sw8 ON selects Full Duplex operation 7104# OFF selects Half Duplex operation - Factory Setting 7105# 7106# S6 - Printer 7107# ------------ 7108# sw1, sw2, sw6, sw7 Reserved - Factory 0 7109# 7110# Printer Port Selection 7111# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 7112# 7113# sw8 ON enables Printer Port 7114# OFF disables Printer Port - Factory Setting 7115# 7116# S7 - Polling Address 7117# -------------------- 7118# sw1-7 Establish ASCII character which designates terminal polling address 7119# ON = logic 0 7120# OFF = logic 1 - Factory Setting 7121# sw8 ON enables Polling Option 7122# OFF disables Polling Option - Factory Setting 7123# 7124# 7125# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. 7126# 7127# This adm31 entry uses underline as the standout mode. 7128# If the adm31 gives you trouble with standout mode, check the DIP switch in 7129# position 6, bank @c11, 25% from back end of the circuit board. Should be 7130# OFF. If there is no such switch, you have an old adm31 and must use oadm31. 7131# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) 7132adm31|lsi adm31 with sw6 set for underline mode, 7133 OTbs, am, mir, 7134 cols#80, lines#24, 7135 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7136 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7137 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, 7138 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 7139 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 7140 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 7141 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 7142adm31-old|o31|old adm31, 7143 rmul@, smso=\EG4, smul@, use=adm31, 7144# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL 7145adm36|LSI ADM36, 7146 OTbs, OTpt, 7147 OTkn#4, 7148 if=/usr/share/tabset/vt100, 7149 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, 7150 use=vt100, 7151# (adm42: removed obsolete ":ma=^K^P:" -- esr) 7152adm42|lsi adm42, 7153 OTbs, am, 7154 cols#80, lines#24, 7155 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7156 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7157 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, 7158 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, 7159 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, 7160 smir=\Eq, smul@, use=adm+sgr, 7161# The following termcap for the Lear Siegler ADM-42 leaves the 7162# "system line" at the bottom of the screen blank (for those who 7163# find it distracting otherwise) 7164adm42-ns|lsi adm-42 with no system line, 7165 cbt=\EI\EF \011, clear=\E;\EF \011, 7166 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, 7167 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, 7168 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, 7169 smir=\Eq\EF \011, use=adm42, 7170# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. 7171# The insert mode of this terminal is commented out because it's broken for our 7172# purposes in that it will shift the position of every character on the page, 7173# not just the cursor line! 7174# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996 7175adm1178|1178|lsi adm1178, 7176 am, 7177 cols#80, lines#24, xmc#1, 7178 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, 7179 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7180 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 7181 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, 7182 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, 7183 sgr0=\E), smso=\EG4, smul=\EG1, 7184 7185#### Prime 7186# 7187# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings 7188# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. 7189# Prime merged with ComputerVision in the late 1980s; you can reach them at: 7190# 7191# ComputerVision Services 7192# 500 Old Connecticut Path 7193# Framingham, Mass. 7194# 7195 7196# Standout mode is dim reverse-video. 7197pt100|pt200|wren|fenix|prime pt100/pt200, 7198 am, bw, mir, msgr, 7199 cols#80, it#8, lines#24, 7200 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, 7201 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 7202 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, 7203 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, 7204 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, 7205 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, 7206 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, 7207 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, 7208 sgr0=\E[m, 7209 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, 7210 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 7211pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, 7212 cols#132, 7213 cup=\E[%i%p1%d;%p2%dH, use=pt100, 7214pt250|Prime PT250, 7215 rmso@, smso@, use=pt100, 7216pt250w|Prime PT250 in 132-column mode, 7217 rmso@, smso@, use=pt100w, 7218 7219#### Qume (qvt) 7220# 7221# Qume, Inc. 7222# 3475-A North 1st Street 7223# San Jose CA 95134 7224# Vox: (800)-457-4447 7225# Fax: (408)-473-1510 7226# Net: josed@techsupp.wyse.com (Jose D'Oliveira) 7227# 7228# Qume was bought by Wyse, but still (as of early 1995) has its own support 7229# group and production division. 7230# 7231# Discontinued Qume models: 7232# 7233# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ 7234# built to replace them, and a qvt119+ which was a 101+ with available wide 7235# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations 7236# and an ANSI-compatible qvt203 that replaced it. Qume started producing 7237# ANSI-compatible terminals with the qvt323 and qvt61. 7238# 7239# Current Qume models (as of February 1995): 7240# 7241# All current Qume terminals have ANSI-compatible operation modes. 7242# Qume is still producing the qvt62, which features emulations for other 7243# popular lines such as ADDS, and dual-host capabilities. The qvt82 is 7244# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal 7245# with many emulations including Wyse370, Wyse 325, etc. Their newest 7246# model is the qvt520, which is vt420-compatible. 7247# 7248# There are some ancient printing Qume terminals under `Daisy Wheel Printers' 7249# 7250# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its 7251# setup mode. Shift-s should be a configuration save to NVRAM. 7252 7253qvt101|qvt108|qume qvt 101 and QVT 108, 7254 xmc#1, use=qvt101+, 7255 7256# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap 7257# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked 7258# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). 7259# What seems to be going on here is that this entry was designed so that 7260# the normal highlight is bold and standout is dim plus something else 7261# (reverse-video maybe? But then, are there two <rev> sequences?) 7262qvt101+|qvt101p|qume qvt 101 PLUS product, 7263 am, bw, hs, ul, 7264 cols#80, lines#24, xmc#0, 7265 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, 7266 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7267 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 7268 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 7269 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, 7270 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, 7271 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 7272 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 7273 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, 7274 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 7275qvt102|qume qvt 102, 7276 cnorm=\E., use=qvt101, 7277# (qvt103: added <rmam>/<smam> based on init string -- esr) 7278qvt103|qume qvt 103, 7279 am, xenl, xon, 7280 cols#80, it#8, lines#24, vt#3, 7281 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 7282 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 7283 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 7284 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 7285 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 7286 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 7287 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 7288 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 7289 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, 7290 rmso=\E[m$<2>, rmul=\E[m$<2>, 7291 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 7292 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 7293 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, 7294 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 7295qvt103-w|qume qvt103 132 cols, 7296 cols#132, lines#24, 7297 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, 7298qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, 7299 am, hs, mir, msgr, 7300 cols#80, lines#24, xmc#0, 7301 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, 7302 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7303 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, 7304 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, 7305 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, 7306 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, 7307 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7308 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7309 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, 7310 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 7311qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, 7312 lines#25, use=qvt119+, 7313qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, 7314 cols#132, 7315 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, 7316qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, 7317 lines#25, use=qvt119+, 7318qvt203|qvt203+|qume qvt 203 Plus, 7319 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 7320 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 7321 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 7322 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, 7323qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), 7324 cols#132, lines#24, 7325 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, 7326# 7327# Since a command is present for enabling 25 data lines, 7328# a specific terminfo entry may be generated for the 203. 7329# If one is desired for the QVT 119 PLUS then 25 lines must 7330# be selected in the status line (setup line 9). 7331# 7332qvt203-25|QVT 203 PLUS with 25 by 80 column mode, 7333 cols#80, lines#25, 7334 is2=\E[=40h\E[?3l, use=qvt203, 7335qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, 7336 cols#132, lines#25, 7337 rs2=\E[?3h\E[=40h, use=qvt203, 7338 7339#### Televideo (tvi) 7340# 7341# TeleVideo 7342# 550 East Brokaw Road 7343# PO Box 49048 95161 7344# San Jose CA 95112 7345# Vox: (408)-954-8333 7346# Fax: (408)-954-0623 7347# 7348# 7349# These require incredible amounts of padding. 7350# 7351# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer 7352# Televideo terminals are ANSI and PC-ANSI compatible. 7353 7354tvi803|televideo 803, 7355 clear=\E*$<10>, use=tvi950, 7356 7357# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 7358# Switch settings are: 7359# 7360# S1 1 2 3 4 7361# D D D D 9600 7362# D D D U 50 7363# D D U D 75 7364# D D U U 110 7365# D U D D 135 7366# D U D U 150 7367# D U U D 300 7368# D U U U 600 7369# U D D D 1200 7370# U D D U 1800 7371# U D U D 2400 7372# U D U U 3600 7373# U U D D 4800 7374# U U D U 7200 7375# U U U D 9600 7376# U U U U 19200 7377# 7378# S1 5 6 7 8 7379# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) 7380# U D X U 7N2 7381# U U D D 7O1 7382# U U D U 7O2 7383# U U U D 7E1 7384# U U U U 7E2 7385# D D X D 8N1 7386# D D X U 8N2 7387# D U D D 8O1 7388# D U U U 8E2 7389# 7390# S1 9 Autowrap 7391# U on 7392# D off 7393# 7394# S1 10 CR/LF 7395# U do CR/LF when CR received 7396# D do CR when CR received 7397# 7398# S2 1 Mode 7399# U block 7400# D conversational 7401# 7402# S2 2 Duplex 7403# U half 7404# D full 7405# 7406# S2 3 Hertz 7407# U 50 7408# D 60 7409# 7410# S2 4 Edit mode 7411# U local 7412# D duplex 7413# 7414# S2 5 Cursor type 7415# U underline 7416# D block 7417# 7418# S2 6 Cursor down key 7419# U send ^J 7420# D send ^V 7421# 7422# S2 7 Screen colour 7423# U green on black 7424# D black on green 7425# 7426# S2 8 DSR status (pin 6) 7427# U disconnected 7428# D connected 7429# 7430# S2 9 DCD status (pin 8) 7431# U disconnected 7432# D duplex 7433# 7434# S2 10 DTR status (pin 20) 7435# U disconnected 7436# D duplex 7437# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, 7438# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) 7439tvi910|televideo model 910, 7440 OTbs, am, msgr, 7441 cols#80, it#8, lines#24, xmc#1, 7442 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7443 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 7444 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, 7445 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, 7446 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 7447 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 7448 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7449 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 7450# From: Alan R. Rogers <rogers%albany@csnet-relay> 7451# as subsequently hacked over by someone at SCO 7452# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) 7453# 7454# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): 7455# 7456# S1 1 2 3 4: 7457# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 7458# D U D D 135 D U D U 150 D U U D 300 D U U U 600 7459# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 7460# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 7461# 7462# S1 5 6 7 8: 7463# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 7464# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 7465# D U D D 8O1 D U U U 8E2 7466# 7467# S1 9 Autowrap (U = on, D = off) 7468# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) 7469# S2 1 Mode (U = block, D = conversational) 7470# S2 2 Duplex (U = half, D = full) 7471# S2 3 Hertz (U = 50, D = 60) 7472# S2 4 Edit mode (U = local, D = duplex) 7473# S2 5 Cursor type (U = underline, D = block) 7474# S2 6 Cursor down key (U = send ^J, D = send ^V) 7475# S2 7 Screen colour (U = green on black, D = black on green) 7476# S2 8 DSR status (pin 6) (U = disconnected, D = connected) 7477# S2 9 DCD status (pin 8) (U = disconnected, D = connected) 7478# S2 10 DTR status (pin 20) (U = disconnected, D = connected) 7479# 7480tvi910+|televideo 910+, 7481 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, 7482 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, 7483 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 7484 ll=\E=7\s, use=tvi910, 7485 7486# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and 7487# <khome> from BRL entry -- esr) 7488tvi912|tvi914|tvi920|old televideo 912/914/920, 7489 OTbs, OTpt, am, msgr, 7490 cols#80, it#8, lines#24, xmc#1, 7491 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7492 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7493 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, 7494 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 7495 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 7496 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 7497 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 7498 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, 7499 tbc=\E3, 7500# We got some new tvi912c terminals that act really weird on the regular 7501# termcap, so one of our gurus worked this up. Seems that cursor 7502# addressing is broken. 7503tvi912cc|tvi912 at cowell college, 7504 cup@, use=tvi912c, 7505 7506# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C 7507# From: Benjamin C. W. Sittler 7508# 7509# Someone has put a scanned copy of the manual online at: 7510# http://vt100.net/televideo/912b-om/ 7511# 7512# These terminals were produced ca. 1979, and had a 12" monochrome 7513# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit 7514# ASCII, and were generally similar to adm3a but with attributes 7515# (including some with magic cookies), fancy half-duplex mode, and 7516# different bugs. 7517# 7518# Some operations reqire truly incredible amounts of padding. The 7519# insert_line (<il1>) and delete_line (<dl1>) operations in particular 7520# are so slow as to be nearly unusable. 7521# 7522# There may or may not have been a separate, earlier series of 912/920 7523# terminals (without the "B" and "C" suffix); I have never seen one, 7524# and the manual only describes the "B" and "C" series. The 912 and 920 7525# are quite distinct from the 914 and 924, which were much nicer non- 7526# magic-cookie terminals similar to the 950. 7527# 7528# This is a new description for the following TeleVideo terminals, 7529# distinguished chiefly by their keyboards: 7530# 7531# TVI-912B - very odd layout, no function keys (84 keys) 7532# TVI-920B - typewriter layout, no function keys (103 keys) 7533# TVI-912C - very odd layout, function keys F1-F11 (82 keys) 7534# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) 7535# 7536# To choose a setting for the TERM variable, start with the model: 7537# 7538# Model || base name 7539# ----------||----------- 7540# TVI-912B || tvi912b 7541# TVI-912C || tvi912c 7542# TVI-920B || tvi920b 7543# TVI-920C || tvi920c 7544# 7545# Then add a suffix from the following table describing installed options 7546# and how you'd like to use the terminal: 7547# 7548# Use Video | Second | Visual | Magic | Page || feature 7549# Attributes | Page | Bell | Cookies | Print || suffix 7550# ------------|--------|--------|---------|-------||--------- 7551# No | No | N/A | N/A | No || -unk 7552# No | No | N/A | N/A | Yes || -p 7553# No | Yes | No | N/A | No || -2p-unk 7554# No | Yes | No | N/A | Yes || -2p-p 7555# No | Yes | Yes | N/A | No || -vb-unk 7556# No | Yes | Yes | N/A | Yes || -vb-p 7557# Yes | No | N/A | No | N/A || 7558# Yes | No | N/A | Yes | N/A || -mc 7559# Yes | Yes | No | No | N/A || -2p 7560# Yes | Yes | No | Yes | N/A || -2p-mc 7561# Yes | Yes | Yes | No | N/A || -vb 7562# Yes | Yes | Yes | Yes | N/A || -vb-mc 7563# 7564# So e.g. a model 920 C with second page memory option, visual bell 7565# and no magic cookies would be tvi920c-vb; a model 912 B without the 7566# second page memory option and using magic cookies would be 7567# tvi912b-mc 7568# 7569# PADDING 7570# 7571# At 9600 baud, the terminal is prone to overflow its input buffer 7572# during complex operations (insert/delete 7573# character/line/screen/page), and it does not signal this over the 7574# RS232 cable. The typical symptom of an overrun is that the terminal 7575# starts beeping, and output becomes garbled. 7576# 7577# The padding delays in this terminfo were derived using tack(1) 7578# running on a Linux box connected to a TVI-920C with a later-model 7579# (A49C1-style) ROM running at 9600 baud, so your mileage may 7580# vary. The numbers below seem to give the terminal enough time so 7581# that it doesn't overflow its input buffer and start losing 7582# characters. 7583# 7584# KEYS 7585# 7586# If you want to use the FUNCT key on a tvi912[bc], use the 7587# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from 7588# the following table (these also work on the 920 series): 7589# 7590# Unshifted Function Keys: 7591# 7592# Key | capname|| Equivalent 7593# -----|--------||------------ 7594# F1 | <kf1> || FUNCT + @ 7595# F2 | <kf2> || FUNCT + A 7596# F3 | <kf3> || FUNCT + B 7597# F4 | <kf4> || FUNCT + C 7598# F5 | <kf5> || FUNCT + D 7599# F6 | <kf6> || FUNCT + E 7600# F7 | <kf7> || FUNCT + F 7601# F8 | <kf8> || FUNCT + G 7602# F9 | <kf9> || FUNCT + H 7603# F10 | <kf10> || FUNCT + I 7604# F11 | <kf11> || FUNCT + J 7605# 7606# Shifted Function Keys: 7607# 7608# SHIFT + Key | capname|| Equivalent 7609# -------------|--------||------------ 7610# SHIFT + F1 | <kf12> || FUNCT + ` 7611# SHIFT + F2 | <kf13> || FUNCT + a 7612# SHIFT + F3 | <kf14> || FUNCT + b 7613# SHIFT + F4 | <kf15> || FUNCT + c 7614# SHIFT + F5 | <kf16> || FUNCT + d 7615# SHIFT + F6 | <kf17> || FUNCT + e 7616# SHIFT + F7 | <kf18> || FUNCT + f 7617# SHIFT + F8 | <kf19> || FUNCT + g 7618# SHIFT + F9 | <kf20> || FUNCT + h 7619# SHIFT + F10 | <kf21> || FUNCT + i 7620# SHIFT + F11 | <kf22> || FUNCT + j 7621# 7622# PORTS AND SWITCH SETTINGS 7623# 7624# Here are the switch settings for the TVI-912B/TVI-920B and 7625# TVI-912C/TVI-920C: 7626# 7627# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: 7628# 2: 9600 3: 4800 4: 2400 5: 1200 7629# 6: 600 7: 300 8: 150 9: 75 7630# 10: 110 7631# 7632# S2 UART/Terminal options: 7633# Up Down 7634# 1: Not used Not allowed 7635# 2: Alternate character set Standard character set 7636# 3: Full duplex Half duplex 7637# 4: 50 Hz refresh 60 Hz refresh 7638# 5: No parity Send parity 7639# 6: 2 stop bits 1 stop bit 7640# 7: 8 data bits 7 data bits 7641# 8: Not used Not allowed on Rev E or lower 7642# 9: Even parity Odd parity 7643# 10: Steady cursor Blinking cursor 7644# (On Rev E or lower, use W25 instead of switch 10.) 7645# 7646# S5 UART/Terminal options: 7647# Open Closed 7648# 1: P3-6 Not connected DSR received on P3-6 7649# 2: P3-8 Not connected DCD received on P3-8 7650# 7651# 3 Open, 4 Open: P3-20 Not connected 7652# 3 Open, 4 Closed: DTR on when terminal is on 7653# 3 Closed, 4 Open: DTR is connected to RTS 7654# 3 Closed, 4 Closed: Not allowed 7655# 7656# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, 7657# all data transmitted out of the modem port (P3) will also be 7658# transmitted out of the printer port (P4). 7659# 7660# 6 Open, 7 Open: Not allowed 7661# 6 Open, 7 Closed: 20ma current loop input 7662# 6 Closed, 7 Open: RS232 input 7663# 6 Closed, 7 Closed: Not allowed 7664# 7665# Jumper options: 7666# If the jumper is installed, the effect will occur (the next time the terminal 7667# is switched on). 7668# 7669# S4/W31: Enables automatic LF upon receipt of CR from 7670# remote or keyboard. 7671# S4/W32: Enables transmission of EOT at the end of Send. If not 7672# installed, a carriage return is sent. 7673# S4/W33: Disables automatic carriage return in column 80. 7674# S4/W34: Selects Page Print Mode as initial condition. If not 7675# installed, Extension Mode is selected. 7676# 7677# NON-STANDARD CAPABILITIES 7678# 7679# Sending <u9> or <u7> returns a cursor position report in the format 7680# YX\r, where Y and X are as in <cup>. This format is described in 7681# <u8> and <u6>, but it's not clear how one should write an 7682# appropriate scanf string, since we need to subtract %' ' from the 7683# character after reading it. The <u9> capability is used by tack(1) 7684# to synchronize during padding tests, and seems to work for that 7685# purpose. 7686# 7687# This description also includes the obsolete termcap capabilities 7688# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>). 7689# 7690# FEATURES NOT YET DESCRIBED IN THIS TERMINFO 7691# 7692# The FUNCT modifier actually works with every normal key by sending 7693# ^AX\r, where X is the sequence normally sent by that key. This is a 7694# sort of meta key not currently describable in terminfo. 7695# 7696# There are quite a few other keys (especially on the 920 models,) but 7697# they are for the most part only useful in block mode. 7698# 7699# These terminals have lots of forms manipulation features, mainly 7700# useful in block mode, including "clear X to nulls" (vs. "clear X to 7701# spaces"; nulls are sentinels for "send X" operations); "send X" 7702# operations for uploading all or part of the screen; and block-mode 7703# editing keys (they don't send escape sequences, but manipulate video 7704# memory directly). Block mode is used for local editing, and protect 7705# mode (in conjunction with the "write protect" attribute, 7706# a.k.a. half-intensity outside of protect mode) is used to control 7707# which parts of the screen are edited/sent/printed (by <mc0>). 7708# 7709# There are at least two major families of ROM, "early" and 7710# A49B1/A49C1; the major difference seems to be that the latter ROMs 7711# support a few extra escape sequences for manipulating the off-screen 7712# memory page, and for sending whole pages back to the host (mainly 7713# useful in block mode.) The descriptions in this file don't use any 7714# of those sequences: set cursor position including page (\E-PYX, 7715# where P is \s for page 0 and ! for page 1 [actually only the LSB of 7716# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are 7717# as in <cup>); read cursor position (\E/), which is analogous to <u9> 7718# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX 7719# are as in <cup>, and some "send page" features mainly useful for 7720# forms manipulation. 7721# 7722# The keyboard enable (\E") and disable (\E#) sequences are unused, 7723# except that a terminal reset (<is2>) enables the keyboard. 7724# 7725# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) 7726# enabled in <is2>, but auto-flip is very jarring so we don't use it. 7727# 7728# BUGS 7729# 7730# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed 7731# sequences (I infer that in some TeleVideo terminal they may invert 7732# and uninvert the display) so the <flash> sequence given here is a 7733# cheesy page-flip instead. 7734# 7735# The back_tab (<cbt>) sequence (\EI) doesn't work according to 7736# tack(1), so it is not included in the descriptions below. 7737# 7738# It's not clear whether auto_left_margin (<bw>) flag should be set 7739# for these terminals; tack says yes, so it is set here, but this 7740# differs from other descriptions I've seen. 7741# 7742# Extension print mode (<mc5>) echoes all characters to the printer 7743# port [in addition to displaying them] except for the page print mode 7744# sequence (<mc4>); this is a slight violation of the terminfo 7745# definition for <mc5> but I don't expect it to cause problems. We 7746# reset to page print mode in <rs1> since it may have been enabled 7747# accidentally. 7748# 7749# The descriptions with plus signs (+) are building blocks. 7750 7751tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), 7752 OTbs, OTpt, am, bw, 7753 cols#80, it#8, lines#24, 7754 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7755 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, 7756 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, 7757 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, 7758 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, 7759 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, 7760 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, 7761 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, 7762 u7=\E?, u8=%c%c\r, u9=\E?, 7763 7764# This isn't included in the basic capabilities because it is 7765# typically unusable in combination with the full range of video 7766# attributes, since the magic cookie attributes turn into ASCII 7767# control characters, and the half-intensity ("protected") attribute 7768# converts all affected characters to spaces. 7769 7770tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, 7771 mc0=\EP, 7772 7773# This uses half-intensity mode (<dim>) for standout (<smso>), and 7774# exposes no other attributes (half-intensity is the only attribute 7775# that does not generate a magic cookie.) 7776 7777tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, 7778 msgr, 7779 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, 7780 smso=\E), 7781 7782# Full magic-cookie attribute support, with half-intensity reverse 7783# video for standout. Note that we add a space in the <dim> sequence 7784# to give a consistent magic-cookie count. Also note that <sgr> uses 7785# backspacing (in the TVI-supported order) to apply all requested 7786# attributes with only a single magic cookie. 7787 7788tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, 7789 xmc#1, 7790 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, 7791 rmul=\Em, 7792 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, 7793 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, 7794 7795# This uses the second page memory option to save & restore screen 7796# contents. If your terminal is missing the option, this description 7797# should still work, but that has not been tested. 7798 7799tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, 7800 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, 7801 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, 7802 7803# This simulates flashing by briefly toggling to the other page 7804# (kludge!) 7805 7806tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, 7807 bel=\EK$<100>\EK, use=tvi912b+2p, 7808 7809# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>) 7810 7811tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, 7812 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, 7813 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, 7814 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, 7815 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 7816 kf8=^AG\r, kf9=^AH\r, 7817 7818# Combinations of the basic building blocks 7819 7820tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), 7821 use=tvi912b+2p, use=tvi912b-unk, 7822 7823tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), 7824 use=tvi912b+vb, use=tvi912b-unk, 7825 7826tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), 7827 use=tvi912b+printer, use=tvi912b-unk, 7828 7829tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), 7830 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, 7831 7832tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), 7833 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, 7834 7835tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), 7836 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, 7837 7838tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), 7839 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, 7840 7841tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), 7842 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, 7843 7844tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), 7845 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, 7846 7847tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), 7848 use=tvi912b+dim, use=tvi912b-unk, 7849 7850tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), 7851 use=tvi912b+mc, use=tvi912b-unk, 7852 7853tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), 7854 use=tvi920b+fn, use=tvi912b-unk, 7855 7856tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), 7857 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, 7858 7859tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), 7860 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, 7861 7862tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), 7863 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, 7864 7865tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), 7866 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, 7867 use=tvi912b-unk, 7868 7869tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), 7870 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, 7871 use=tvi912b-unk, 7872 7873tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), 7874 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, 7875 use=tvi912b-unk, 7876 7877tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), 7878 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, 7879 use=tvi912b-unk, 7880 7881tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), 7882 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, 7883 use=tvi912b-unk, 7884 7885tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), 7886 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, 7887 use=tvi912b-unk, 7888 7889tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), 7890 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, 7891 7892tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), 7893 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, 7894 7895# Televideo 921 and variants 7896# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995 7897# (tvi921: removed :ko=bt: before translation, I see no backtab cap; 7898# also added empty <acsc> to suppress tic warning -- esr) 7899tvi921|televideo model 921 with sysline same as page & real vi function, 7900 OTbs, OTpt, am, hs, xenl, xhp, 7901 cols#80, lines#24, xmc#0, 7902 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7903 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7904 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7905 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 7906 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, 7907 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, 7908 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, 7909 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, 7910 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, 7911# without the beeper 7912# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; 7913# also added empty <acsc> to suppress tic warning -- esr) 7914tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, 7915 am, hs, xenl, xhp, 7916 cols#80, lines#24, xmc#0, 7917 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7918 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7919 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7920 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, 7921 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7922 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 7923 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 7924 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, 7925 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, 7926# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) 7927tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 7928 dl1=\ER$<2*/>, il1=\EE$<2*/>, 7929 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 7930 kil1=\EE$<2*/>, use=tvi92B, 7931 7932# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings 7933# in from a BSD termcap file because it looks like they do something the 7934# old ones skip -- esr) 7935tvi924|televideo tvi924, 7936 am, bw, hs, in, mir, msgr, xenl, xon, 7937 cols#80, it#8, lines#24, wsl#80, xmc#0, 7938 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, 7939 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, 7940 cub1=^H, cud1=^V, cuf1=^L, 7941 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, 7942 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, 7943 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, 7944 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7945 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, 7946 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 7947 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, 7948 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, 7949 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 7950 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 7951 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, 7952 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, 7953 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, 7954 use=adm+sgr, 7955 7956# TVI925 DIP switches. In each of these, D = Down and U = Up, 7957# 7958# Here are the settings for the external (baud) switches (S1): 7959# 7960# Position Baud 7961# 7 8 9 10 [Printer] 7962# 1 2 3 4 [Main RS232] 7963# ----------------------------------------------------- 7964# D D D D 9600 7965# D D D U 50 7966# D D U D 75 7967# D D U U 110 7968# D U D D 135 7969# D U D U 150 7970# D U U D 300 7971# D U U U 600 7972# U D D D 1200 7973# U D D U 1800 7974# U D U D 2400 7975# U D U U 3600 7976# U U D D 4800 7977# U U D U 7200 7978# U U U D 9600 7979# U U U U 19200 7980# 7981# 7982# Settings for word length and stop-bits (S1) 7983# 7984# Position Description 7985# 5 6 7986# --------------------------- 7987# U - 7-bit word 7988# D - 8-bit word 7989# - U 2 stop bits 7990# - D 1 stop bit 7991# 7992# 7993# S2 (external) settings 7994# 7995# Position Up Dn Description 7996# -------------------------------------------- 7997# 1 X Local edit 7998# X Duplex edit (transmit editing keys) 7999# -------------------------------------------- 8000# 2 X 912/920 emulation 8001# X 925 8002# -------------------------------------------- 8003# 3 X 8004# 4 X No parity 8005# 5 X 8006# -------------------------------------------- 8007# 3 X 8008# 4 X Odd parity 8009# 5 X 8010# -------------------------------------------- 8011# 3 X 8012# 4 X Even parity 8013# 5 X 8014# -------------------------------------------- 8015# 3 X 8016# 4 X Mark parity 8017# 5 X 8018# -------------------------------------------- 8019# 3 X 8020# 4 X Space parity 8021# 5 X 8022# -------------------------------------------- 8023# 6 X White on black display 8024# X Black on white display 8025# -------------------------------------------- 8026# 7 X Half Duplex 8027# 8 X 8028# -------------------------------------------- 8029# 7 X Full Duplex 8030# 8 X 8031# -------------------------------------------- 8032# 7 X Block mode 8033# 8 X 8034# -------------------------------------------- 8035# 9 X 50 Hz 8036# X 60 Hz 8037# -------------------------------------------- 8038# 10 X CR/LF (Auto LF) 8039# X CR only 8040# 8041# S3 (internal switch) settings: 8042# 8043# Position Up Dn Description 8044# -------------------------------------------- 8045# 1 X Keyclick off 8046# X Keyclick on 8047# -------------------------------------------- 8048# 2 X English 8049# 3 X 8050# -------------------------------------------- 8051# 2 X German 8052# 3 X 8053# -------------------------------------------- 8054# 2 X French 8055# 3 X 8056# -------------------------------------------- 8057# 2 X Spanish 8058# 3 X 8059# -------------------------------------------- 8060# 4 X Blinking block cursor 8061# 5 X 8062# -------------------------------------------- 8063# 4 X Blinking underline cursor 8064# 5 X 8065# -------------------------------------------- 8066# 4 X Steady block cursor 8067# 5 X 8068# -------------------------------------------- 8069# 4 X Steady underline cursor 8070# 5 X 8071# -------------------------------------------- 8072# 6 X Screen blanking timer (ON) 8073# X Screen blanking timer (OFF) 8074# -------------------------------------------- 8075# 7 X Page attributes 8076# X Line attributes 8077# -------------------------------------------- 8078# 8 X DCD disconnected 8079# X DCD connected 8080# -------------------------------------------- 8081# 9 X DSR disconnected 8082# X DSR connected 8083# -------------------------------------------- 8084# 10 X DTR Disconnected 8085# X DTR connected 8086# -------------------------------------------- 8087# 8088# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) 8089tvi925|televideo 925, 8090 OTbs, am, bw, hs, ul, 8091 cols#80, lines#24, xmc#1, 8092 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, 8093 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8094 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 8095 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, 8096 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, 8097 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 8098 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 8099 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 8100 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, 8101 tsl=\Eh\Ef, use=adm+sgr, 8102# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL 8103# to avoid "magic cookie" standout glitch: 8104tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 8105 xmc@, 8106 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, 8107 8108# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 8109# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 8110# for additional capabilities, 8111# The following tvi descriptions from B:pjphar and virus!mike 8112# is for all 950s. It sets the following attributes: 8113# full duplex (\EDF) write protect off (\E() 8114# conversation mode (\EC) graphics mode off (\E%) 8115# white on black (\Ed) auto page flip off (\Ew) 8116# turn off status line (\Eg) clear status line (\Ef\r) 8117# normal video (\E0) monitor mode off (\EX or \Eu) 8118# edit mode (\Er) load blank char to space (\Ee\040) 8119# line edit mode (\EO) enable buffer control (^O) 8120# protect mode off (\E\047) duplex edit keys (\El) 8121# program unshifted send key to send line all (\E016) 8122# program shifted send key to send line unprotected (\E004) 8123# set the following to nulls: 8124# field delimiter (\Ex0\200\200) 8125# line delimiter (\Ex1\200\200) 8126# start-protected field delimiter (\Ex2\200\200) 8127# end-protected field delimiter (\Ex3\200\200) 8128# set end of text delimiter to carriage return/null (\Ex4\r\200) 8129# 8130# TVI 950 Switch Setting Reference Charts 8131# 8132# TABLE 1: 8133# 8134# S1 1 2 3 4 5 6 7 8 9 10 8135# +-----------------------+-----+-----+-----------------------+ 8136# | Computer Baud Rate |Data |Stop | Printer Baud Rate | 8137# | |Bits |Bits | | 8138# +------+-----------------------+-----+-----+-----------------------+ 8139# | Up | See | 7 | 2 | See | 8140# +------+-----------------------+-----+-----+-----------------------+ 8141# | Down | TABLE 2 | 8 | 1 | TABLE 2 | 8142# +------+-----------------------+-----+-----+-----------------------+ 8143# 8144# 8145# S2 1 2 3 4 5 6 7 8 9 10 8146# +-----+-----+-----------------+-----+-----------+-----+-----+ 8147# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| 8148# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8149# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | 8150# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8151# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | 8152# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8153# 8154# TABLE 2: 8155# 8156# +-----------+-----+-----+-----+-----+-----------+ 8157# | Display | 1 | 2 | 3 | 4 | Baud | 8158# +-----------+-----+-----+-----+-----+ | 8159# | Printer | 7 | 8 | 9 | 10 | Rate | 8160# +-----------+-----+-----+-----+-----+-----------+ 8161# | D | D | D | D | 9600 | 8162# | U | D | D | D | 50 | 8163# | D | U | D | D | 75 | 8164# | U | U | D | D | 110 | 8165# | D | D | U | D | 135 | 8166# | U | D | U | D | 150 | 8167# | D | U | U | D | 300 | 8168# | U | U | U | D | 600 | 8169# | D | D | D | U | 1200 | 8170# | U | D | D | U | 1800 | 8171# | D | U | D | U | 2400 | 8172# | U | U | D | U | 3600 | 8173# | D | D | U | U | 4800 | 8174# | U | D | U | U | 7200 | 8175# | D | U | U | U | 9600 | 8176# | U | U | U | U | 19200 | 8177# +-----+-----+-----+-----+-----------+ 8178# 8179# TABLE 3: 8180# +-----+-----+-----+-----------+ 8181# | 3 | 4 | 5 | Parity | 8182# +-----+-----+-----+-----------+ 8183# | X | X | D | None | 8184# | D | D | U | Odd | 8185# | D | U | U | Even | 8186# | U | D | U | Mark | 8187# | U | U | U | Space | 8188# +-----+-----+-----+-----------+ 8189# X = don't care 8190# 8191# CHART: 8192# +-----+-----+-----------------+ 8193# | 7 | 8 | Communication | 8194# +-----+-----+-----------------+ 8195# | D | D | Half Duplex | 8196# | D | U | Full Duplex | 8197# | U | D | Block | 8198# | U | U | Local | 8199# +-----+-----+-----------------+ 8200# 8201# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 8202# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 8203# should be present and all tvi native modes use the same string for this. 8204# Finally, note that BSD has cud1=^V. -- esr) 8205tvi950|televideo 950, 8206 OTbs, am, hs, mir, msgr, xenl, xon, 8207 cols#80, it#8, lines#24, xmc#1, 8208 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, 8209 cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8210 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8211 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, 8212 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, 8213 invis@, 8214 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, 8215 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, 8216 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, 8217 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8218 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8219 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, 8220 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 8221 use=adm+sgr, 8222# 8223# is for 950 with two pages adds the following: 8224# set 48 line page (\E\\2) 8225# place cursor at page 0, line 24, column 1 (\E-07 ) 8226# set local (no send) edit keys (\Ek) 8227# 8228# two page 950 adds the following: 8229# when entering ex, set 24 line page (\E\\1) 8230# when exiting ex, reset 48 line page (\E\\2) 8231# place cursor at 0,24,1 (\E-07 ) 8232# set duplex (send) edit keys (\El) when entering vi 8233# set local (no send) edit keys (\Ek) when exiting vi 8234# 8235tvi950-2p|televideo950 w/2 pages, 8236 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, 8237 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8238 smkx=\El, use=tvi950, 8239# 8240# is for 950 with four pages adds the following: 8241# set 96 line page (\E\\3) 8242# place cursor at page 0, line 24, column 1 (\E-07 ) 8243# 8244# four page 950 adds the following: 8245# when entering ex, set 24 line page (\E\\1) 8246# when exiting ex, reset 96 line page (\E\\3) 8247# place cursor at 0,24,1 (\E-07 ) 8248# 8249tvi950-4p|televideo950 w/4 pages, 8250 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, 8251 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8252 smkx=\El, use=tvi950, 8253# 8254# <is2> for reverse video 950 changes the following: 8255# set reverse video (\Ed) 8256# 8257# set vb accordingly (\Ed ...delay... \Eb) 8258# 8259tvi950-rv|televideo950 rev video, 8260 flash=\Ed$<200/>\Eb, 8261 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, 8262 use=tvi950, 8263 8264# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv 8265tvi950-rv-2p|televideo950 rev video w/2 pages, 8266 flash=\Ed$<200/>\Eb, 8267 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, 8268 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8269 smkx=\El, use=tvi950, 8270 8271# tvi950-rv uses the appropriate entries from 950-4p and 950-rv 8272tvi950-rv-4p|televideo950 rev video w/4 pages, 8273 flash=\Ed$<200/>\Eb, 8274 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, 8275 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8276 smkx=\El, use=tvi950, 8277# From: Andreas Stolcke <stolcke@icsi.berkeley.edu> 8278# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; 8279# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in 8280# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note 8281# the :ko: string had :cl: in it, which means that one of the original 8282# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what 8283# the 950 has. Finally, corrected the <kel> string to match the 950 and what 8284# ko implies -- esr) 8285# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would 8286# also work. 8287tvi955|televideo 955, 8288 OTbs, mc5i, msgr@, 8289 it#8, xmc@, 8290 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, 8291 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 8292 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 8293 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, 8294 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, 8295 rmam=\E[=7l, rmxon=^N, 8296 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, 8297 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, 8298 use=tvi950, 8299tvi955-w|955-w|televideo955 w/132 cols, 8300 cols#132, 8301 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, 8302# use half-intensity as normal mode, full intensity as <bold> 8303tvi955-hb|955-hb|televideo955 half-bright, 8304 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, 8305 sgr0=\EG0\E[=5h, use=tvi955, 8306# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin 8307# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; 8308# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. 8309# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what 8310# it does to the function keys. I deduced <rmam>/<smam>. 8311# also added empty <acsc> to suppress tic warning, -- esr) 8312tvi970|televideo 970, 8313 OTbs, OTpt, am, da, db, mir, msgr, 8314 cols#80, it#8, lines#24, 8315 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 8316 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 8317 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, 8318 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, 8319 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, 8320 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, 8321 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8322 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, 8323 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, 8324 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 8325 sgr0=\E[m, smacs=\E(B, smam=\E[?7l, 8326 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, 8327 smul=\E[4m, vpa=\E[%i%p1%dd, 8328tvi970-vb|televideo 970 with visual bell, 8329 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 8330 use=tvi970, 8331tvi970-2p|televideo 970 with using 2 pages of memory, 8332 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, 8333 use=tvi970, 8334# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars 8335# per line (rather than 40), Esc K chooses the normal character set. Not sure 8336# padding is needed, but adapted from the tvi920c termcap. The <smso> and 8337# <smul> strings are klutzy, but at least use no screen space. 8338# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, 8339# its absence means <smam>=\Ev isn't safe to use. -- esr) 8340# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. 8341# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: 8342# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. 8343tvipt|televideo personal terminal, 8344 OTbs, am, 8345 cols#80, lines#24, 8346 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 8347 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, 8348 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, 8349 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, 8350 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, 8351 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, 8352# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996 8353tvi9065|televideo 9065, 8354 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, 8355 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, 8356 wnum#0, wsl#30, 8357 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, 8358 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, 8359 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 8360 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, 8361 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, 8362 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, 8363 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, 8364 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 8365 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, 8366 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, 8367 ip=$<3>, 8368 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, 8369 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, 8370 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 8371 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, 8372 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8373 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, 8374 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, 8375 pfkey=\E|%p1%{48}%+%c3%p2%s\031, 8376 pfloc=\E|%p1%{48}%+%c2%p2%s\031, 8377 pfx=\E|%p1%{48}%+%c1%p2%s\031, 8378 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, 8379 rep=\E[%p2%db%p1%c, rev=\EG4, 8380 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, 8381 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, 8382 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, 8383 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, 8384 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, 8385 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, 8386 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;, 8387 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, 8388 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, 8389 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, 8390 8391#### Visual (vi) 8392# 8393# In September 1993, Visual Technology of Westboro, Massachusetts, 8394# merged with White Pine Software of Nashua, New Hampshire. 8395# 8396# White Pine Software may be contacted at +1 603/886-9050. 8397# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. 8398# 8399 8400# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> 8401# Recently I hacked together the following termcap for Visual 8402# Technology's Visual 50 terminal. It's a slight modification of 8403# the vt52 termcap. 8404# It's intended to run when the Visual 50 is in vt52 emulation mode 8405# (I know what you're thinking; if it's emulating a vt52, then why 8406# another termcap? Well, it turns out that the Visual 50 can handle 8407# <dl1> and db(?) among other things, which the vt52 can't) 8408# The termcap works OK for the most part. The only problem is on 8409# character inserts. The whole line gets painfully redrawn for each 8410# character typed. Any suggestions? 8411# Beau's entry is combined with the vi50 entry from University of Wisconsin. 8412# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in 8413# disguise; <kf7>-<kf9> are really l1-l3. 8414vi50|visual 50, 8415 OTbs, OTpt, am, da, db, msgr, 8416 cols#80, it#8, lines#24, 8417 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, 8418 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8419 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, 8420 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 8421 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, 8422 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 8423 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, 8424# this one was BSD & SCO's vi50 8425vi50adm|visual 50 in adm3a mode, 8426 am, msgr, 8427 cols#80, it#8, lines#24, 8428 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8429 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 8430 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 8431 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 8432 rmso=\ET, smso=\EU, 8433# From: Jeff Siegal <jbs@quiotix.com> 8434vi55|Visual 55, 8435 OTbs, am, mir, msgr, 8436 cols#80, it#8, lines#24, 8437 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, 8438 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8439 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 8440 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, 8441 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, 8442 smir=\Ea, smso=\EU, 8443 8444# Visual 200 from BRL 8445# The following switch settings are assumed for normal operation: 8446# FULL_DUPLEX SCROLL CR 8447# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE 8448# Other switches may be set for operator convenience or communication 8449# requirements. 8450# Character insertion is kludged in order to get around the "beep" misfeature. 8451# (This cap is commented out because <smir>/<rmir> is more efficient -- esr) 8452# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, 8453# and <dl1> strings, but we seem to get along fine without them. 8454vi200|visual 200, 8455 OTbs, OTpt, am, mir, msgr, 8456 OTkn#10, cols#80, it#8, lines#24, 8457 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, 8458 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8459 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, 8460 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, 8461 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 8462 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, 8463 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, 8464 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, 8465 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, 8466 rmacs=\EG, rmkx=\E>, rmso=\E3, 8467 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, 8468 smkx=\E=, smso=\E4, tbc=\Eg, 8469# The older Visuals didn't come with function keys. This entry uses 8470# <smkx> and <rmkx> so that the keypad keys can be used as function keys. 8471# If your version of vi doesn't support function keys you may want 8472# to use vi200-f. 8473vi200-f|visual 200 no function keys, 8474 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, 8475 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, 8476 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, 8477 use=vi200, 8478vi200-rv|visual 200 reverse video, 8479 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, 8480 8481# the function keys are programmable but we don't reprogram them to their 8482# default values with <is2> because programming them is very verbose. maybe 8483# an initialization file should be made for the 300 and they could be stuck 8484# in it. 8485# (vi300: added <rmam>/<smam> based on init string -- esr) 8486vi300|visual 300 ansi x3.64, 8487 am, bw, mir, xenl, 8488 cols#80, lines#24, 8489 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 8490 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 8491 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 8492 il1=\E[L, ind=^J, 8493 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, 8494 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8495 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, 8496 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, 8497 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, 8498 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 8499 smso=\E[1m, smul=\E[4m, 8500# some of the vi300s have older firmware that has the command 8501# sequence for setting editing extent reversed. 8502vi300-old|visual 300 with old firmware (set edit extent reversed), 8503 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, 8504 use=vi300, 8505 8506# Visual 500 prototype entry from University of Wisconsin. 8507# The best place to look for the escape sequences is page A1-1 of the 8508# Visual 500 manual. The initialization sequence given here may be 8509# overkill, but it does leave out some of the initializations which can 8510# be done with the menus in set-up mode. 8511# The :xp: line below is so that emacs can understand the padding requirements 8512# of this slow terminal. :xp: is 10 time the padding factor. 8513# (vi500: removed unknown :xp#4: termcap; 8514# also added empty <acsc> to suppress tic warning -- esr) 8515vi500|visual 500, 8516 am, mir, msgr, 8517 cols#80, it#8, lines#33, 8518 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, 8519 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 8520 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 8521 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, 8522 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, 8523 ind=^J, 8524 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 8525 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 8526 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, 8527 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, 8528 8529# The visual 550 is a visual 300 with tektronix graphics, 8530# and with 33 lines. clear screen is modified here to 8531# also clear the graphics. 8532vi550|visual 550 ansi x3.64, 8533 lines#33, 8534 clear=\030\E[H\E[2J, use=vi300, 8535 8536vi603|visual603|visual 603, 8537 hs, mir, 8538 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 8539 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, 8540 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 8541 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, 8542 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 8543 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 8544 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, 8545 use=vt100, 8546 8547#### Wyse (wy) 8548# 8549# Wyse Technology 8550# 3471 North First Street 8551# San Jose, CA 95134 8552# Vox: (408)-473-1200 8553# Fax: (408) 473-1222 8554# Web: http://www.wyse.com 8555# 8556# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at 8557# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the 8558# obvious address, <http://www.wyse.com>. They keep terminfo entries at 8559# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>. 8560# 8561# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. 8562# They now own the Qume and Amdek brands, too. So these are the people to 8563# talk with about all Link, Qume, and Amdek terminals. 8564# 8565# These entries include a few small fixes. 8566# I canceled the bel capacities in the vb entries. 8567# I made two trivial syntax fixes in the wyse30 entry. 8568# I made some entries relative to adm+sgr. 8569# 8570# 8571# Note: The wyse75, wyse85, and wyse99 have been discontinued. 8572 8573# Although the Wyse 30 can support more than one attribute 8574# it requires magic cookies to do so. Many applications do not 8575# function well with magic cookies. The following terminfo uses 8576# the protect mode to support one attribute (dim) without cookies. 8577# If more than one attribute is needed then the wy30-mc terminfo 8578# should be used. 8579# 8580wy30|wyse30|Wyse 30, 8581 am, bw, hs, mc5i, mir, msgr, xon, 8582 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 8583 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 8584 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, 8585 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 8586 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 8587 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, 8588 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, 8589 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, 8590 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 8591 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, 8592 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8593 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, 8594 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, 8595 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, 8596 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 8597 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 8598 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8599 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 8600 smso=\E`7\E), tbc=\E0, tsl=\EF, 8601# 8602# This terminal description uses the non-hidden attribute mode 8603# (with magic cookie). 8604# 8605# (wy30-mc: added <smcup> to suppress tic warning --esr) 8606wy30-mc|wyse30-mc|wyse 30 with magic cookies, 8607 msgr@, 8608 ma@, xmc#1, 8609 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 8610 rmcup=\EG0, rmso=\EG0, 8611 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8612 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 8613 smso=\EG4, use=wy30, use=adm+sgr, 8614# The mandatory pause used by <flash> does not work with 8615# older versions of terminfo. If you see this effect then 8616# unset xon and delete the / from the delay. 8617# i.e. change $<100/> to $<100> 8618wy30-vb|wyse30-vb|wyse 30 visible bell, 8619 bel@, use=wy30, 8620# 8621# The Wyse 50 can support one attribute (e.g. Dim, Inverse, 8622# Normal) without magic cookies by using the protect mode. 8623# The following description uses this feature, but when more 8624# than one attribute is put on the screen at once, all attributes 8625# will be changed to be the same as the last attribute given. 8626# The Wyse 50 can support more attributes when used with magic 8627# cookies. The wy50-mc terminal description uses magic cookies 8628# to correctly handle multiple attributes on a screen. 8629# 8630wy50|wyse50|Wyse 50, 8631 am, bw, hs, mc5i, mir, msgr, xon, 8632 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 8633 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 8634 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, 8635 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 8636 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, 8637 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 8638 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, 8639 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, 8640 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, 8641 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 8642 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 8643 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8644 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8645 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 8646 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, 8647 pfx=\Ez%p1%{63}%+%c%p2%s\177, 8648 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 8649 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 8650 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8651 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 8652 smso=\E`6\E), tbc=\E0, tsl=\EF, 8653# 8654# This terminal description uses the non-hidden attribute mode 8655# (with magic cookie). 8656# 8657# The mandatory pause used by flash does not work with some 8658# older versions of terminfo. If you see this effect then 8659# unset <xon> and delete the / from the delay. 8660# i.e. change $<100/> to $<100> 8661# (wy50-mc: added <smcup> to suppress tic warning --esr) 8662wy50-mc|wyse50-mc|wyse 50 with magic cookies, 8663 msgr@, 8664 ma@, xmc#1, 8665 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 8666 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 8667 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8668 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 8669 smso=\EGt, use=wy50, use=adm+sgr, 8670wy50-vb|wyse50-vb|wyse 50 visible bell, 8671 bel@, use=wy50, 8672wy50-w|wyse50-w|wyse 50 132-column, 8673 cols#132, lw#7, nlab#16, wsl#97, 8674 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 8675 use=wy50, 8676wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, 8677 bel@, use=wy50-w, 8678 8679# 8680# The Wyse 350 is a Wyse 50 with color. 8681# Unfortunately this means that it has magic cookies. 8682# The color attributes are designed to overlap the reverse, dim and 8683# underline attributes. This is nice for monochrome applications 8684# because you can make underline stuff green (or any other color) 8685# but for true color applications it's not so hot because you cannot 8686# mix color with reverse, dim or underline. 8687# To further complicate things one of the attributes must be 8688# black (either the foreground or the background). In reverse video 8689# the background changes color with black letters. In normal video 8690# the foreground changes colors on a black background. 8691# This terminfo uses some of the more advanced features of curses 8692# to display both color and blink. In the final analysis I am not 8693# sure that the wy350 runs better with this terminfo than it does 8694# with the wy50 terminfo (with user adjusted colors). 8695# 8696# The mandatory pause used by flash does not work with 8697# older versions of terminfo. If you see this effect then 8698# unset xon and delete the / from the delay. 8699# i.e. change $<100/> to $<100> 8700# 8701# Bug: The <op> capability resets attributes. 8702wy350|wyse350|Wyse 350, 8703 am, bw, hs, mc5i, mir, xon, 8704 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 8705 wsl#45, xmc#1, 8706 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 8707 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 8708 cub1=^H, cud1=^J, cuf1=^L, 8709 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 8710 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, 8711 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 8712 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, 8713 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 8714 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 8715 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 8716 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 8717 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8718 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8719 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 8720 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, 8721 pfx=\Ez%p1%{63}%+%c%p2%s\177, 8722 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 8723 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 8724 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, 8725 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8726 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 8727 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, 8728wy350-vb|wyse350-vb|wyse 350 visible bell, 8729 bel@, use=wy350, 8730wy350-w|wyse350-w|wyse 350 132-column, 8731 cols#132, lw#7, nlab#16, wsl#97, 8732 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 8733 use=wy350, 8734wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, 8735 bel@, use=wy350-w, 8736# 8737# This terminfo description is untested. 8738# The wyse100 emulates an adm31, so the adm31 entry should work. 8739# 8740wy100|wyse 100, 8741 hs, mir, 8742 cols#80, lines#24, xmc#1, 8743 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8744 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8745 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, 8746 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 8747 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 8748 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 8749 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, 8750# 8751# The Wyse 120/150 has most of the features of the Wyse 60. 8752# This terminal does not need padding up to 9600 baud! 8753# <msgr> should be set but the clear screen fails when in 8754# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8755# then set <msgr>. 8756# 8757wy120|wyse120|wy150|wyse150|Wyse 120/150, 8758 am, bw, hs, km, mc5i, mir, msgr, xon, 8759 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 8760 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8761 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 8762 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8763 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 8764 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 8765 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, 8766 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 8767 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8768 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8769 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8770 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8771 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8772 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8773 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8774 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 8775 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8776 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8777 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8778 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 8779 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 8780 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 8781 rs3=\EwG\Ee($<100>, 8782 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8783 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8784 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8785 tbc=\E0, tsl=\EF, use=adm+sgr, 8786# 8787wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, 8788 cols#132, lw#7, nlab#16, wsl#97, 8789 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 8790 rs2=\E`;$<70>, use=wy120, 8791# 8792wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, 8793 lh@, lines#25, lw@, nlab@, 8794 pln@, rs3=\EwG\Ee)$<100>, use=wy120, 8795# 8796wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, 8797 lh@, lines#25, lw@, nlab@, 8798 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 8799# 8800wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 8801 bel@, use=wy120, 8802# 8803wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 8804 bel@, use=wy120-w, 8805# 8806# The Wyse 60 is like the Wyse 50 but with more padding. 8807# The reset strings are slow and the pad times very depending 8808# on other parameters such as font loading. I have tried 8809# to follow the following outline: 8810# 8811# <rs1> -> set personality 8812# <rs2> -> set number of columns 8813# <rs3> -> set number of lines 8814# <is1> -> select the proper font 8815# <is2> -> do the initialization 8816# <is3> -> set up display memory (2 pages) 8817# 8818# The Wyse 60's that have vt100 emulation are slower than the 8819# older Wyse 60's. This change happened mid-1987. 8820# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> 8821# 8822# The meta key is only half right. This terminal will return the 8823# high order bit set when you hit CTRL-function_key 8824# 8825# It may be useful to assign two function keys with the 8826# values \E=(\s look at old data in page 1 8827# \E=W, look at bottom of page 1 8828# where \s is a space ( ). 8829# 8830# Note: 8831# The Wyse 60 runs faster when the XON/XOFF 8832# handshake is turned off. 8833# 8834# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid 8835# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 8836wy60|wyse60|Wyse 60, 8837 am, bw, hs, km, mc5i, mir, msgr, 8838 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, 8839 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8840 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 8841 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8842 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8843 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, 8844 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 8845 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, 8846 ip=$<3>, is1=\EcB0\EcC1, 8847 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8848 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8849 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8850 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8851 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8852 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8853 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8854 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 8855 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8856 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8857 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8858 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 8859 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 8860 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 8861 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 8862 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8863 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8864 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8865 tbc=\E0, tsl=\EF, use=adm+sgr, 8866# 8867wy60-w|wyse60-w|wyse 60 132-column, 8868 cols#132, lw#7, nlab#16, wsl#97, 8869 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 8870 rs2=\EeF$<150>\E`;$<150>, use=wy60, 8871# 8872wy60-25|wyse60-25|wyse 60 80-column 25-lines, 8873 lh@, lines#25, lw@, nlab@, 8874 pln@, rs3=\EwG\Ee)$<200>, use=wy60, 8875wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, 8876 lh@, lines#25, lw@, nlab@, 8877 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 8878# 8879wy60-42|wyse60-42|wyse 60 80-column 42-lines, 8880 lines#42, 8881 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 8882 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 8883 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 8884 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, 8885wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, 8886 cols#132, lw#7, nlab#16, wsl#97, 8887 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8888 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, 8889 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, 8890# 8891wy60-43|wyse60-43|wyse 60 80-column 43-lines, 8892 lh@, lines#43, lw@, nlab@, 8893 pln@, rs3=\Ee+$<150>, use=wy60-42, 8894wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, 8895 lh@, lines#43, lw@, nlab@, 8896 pln@, rs3=\Ee+$<150>, use=wy60-42-w, 8897# 8898wy60-vb|wyse60-vb|Wyse 60 visible bell, 8899 bel@, use=wy60, 8900wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 8901 bel@, use=wy60-w, 8902 8903# The Wyse-99GT looks at lot like the Wyse 60 except that it 8904# does not have the 42/43 line mode. In the Wyse-60 the "lines" 8905# setup parameter controls the number of lines on the screen. 8906# For the Wyse 99GT the "lines" setup parameter controls the 8907# number of lines in a page. The screen can display 25 lines max. 8908# The Wyse-99GT also has personalities for the VT220 and 8909# Tektronix 4014. But this has no bearing on the native mode. 8910# 8911# (msgr) should be set but the clear screen fails when in 8912# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8913# then set msgr, else use msgr@. 8914# 8915# u0 -> enter Tektronix mode 8916# u1 -> exit Tektronix mode 8917# 8918wy99gt|wyse99gt|Wyse 99gt, 8919 msgr@, 8920 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 8921 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, 8922 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 8923 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, 8924 u0=\E~>\E8, u1=\E[42h, use=wy60, 8925# 8926wy99gt-w|wyse99gt-w|wyse 99gt 132-column, 8927 cols#132, lw#7, nlab#16, wsl#97, 8928 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8929 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, 8930 use=wy99gt, 8931# 8932wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, 8933 lh@, lines#25, lw@, nlab@, 8934 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, 8935# 8936wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, 8937 lh@, lines#25, lw@, nlab@, 8938 pln@, rs2=\E`;$<150>, use=wy99gt-w, 8939# 8940wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 8941 bel@, use=wy99gt, 8942# 8943wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 8944 bel@, use=wy99gt-w, 8945 8946# Can't set tabs! Other bugs (ANSI mode only): 8947# - can't redefine function keys (anyway, key redefinition in ANSI mode 8948# is too much complex to be described); 8949# - meta key can't be described (the terminal forgets it when reset); 8950# The xon-xoff handshaking can't be disabled while in ansi personality, so 8951# emacs can't work at speed greater than 9600 baud. No padding is needed at 8952# this speed. 8953# dch1 has been commented out because it causes annoying glittering when 8954# vi deletes one character at the beginning of a line with tabs in it. 8955# dch makes sysgen(1M) have a horrible behaviour when deleting 8956# a screen and makes screen(1) behave badly, so it is disabled too. The nice 8957# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are 8958# not, so smir and rmir are commented out as well. 8959# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8960wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), 8961 am, km, mc5i, mir, msgr, xenl, 8962 cols#80, it#8, lines#25, vt#3, 8963 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, 8964 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8965 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, 8966 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, 8967 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, 8968 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, 8969 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 8970 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 8971 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, 8972 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, 8973 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 8974 il1=\E[L, ind=\n$<1>, invis=\E[8m, 8975 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, 8976 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 8977 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 8978 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, 8979 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, 8980 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 8981 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, 8982 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, 8983 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 8984 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, 8985 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, 8986 sc=\E7, 8987 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, 8988 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, 8989 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 8990 8991# This is the american terminal. Here tabs work fine. 8992# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8993wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), 8994 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, 8995 8996# This terminal (firmware version 02) has a lot of bugs: 8997# - can't set tabs; 8998# - other bugs in ANSI modes (see above). 8999# This description disables handshaking when using cup. This is because 9000# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal 9001# cannot be used at speeds greater than 9600 baud, because at greater 9002# speeds handshaking is needed even for character sending. If you use 9003# DTR handshaking, you can use even greater speeds. 9004# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9005wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), 9006 am, bw, hs, km, mc5i, mir, msgr, xon, 9007 cols#80, it#8, lines#25, wsl#46, 9008 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, 9009 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, 9010 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, 9011 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 9012 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, 9013 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, 9014 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, 9015 ind=^J, invis=\EG3, 9016 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, 9017 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, 9018 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, 9019 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, 9020 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, 9021 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, 9022 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 9023 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, 9024 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., 9025 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, 9026 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, 9027 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, 9028 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, 9029 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, 9030 9031# This is the american terminal. Here tabs work. 9032# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9033wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), 9034 hts=\E1, tbc=\E0, use=wy99f, 9035 9036# 9037# The Wyse 160 is combination of the WY-60 and the WY-99gt. 9038# The reset strings are slow and the pad times very depending 9039# on other parameters such as font loading. I have tried 9040# to follow the following outline: 9041# 9042# <rs1> -> set personality 9043# <rs2> -> set number of columns 9044# <rs3> -> set number of lines 9045# <is1> -> select the proper font 9046# <is2> -> do the initialization 9047# <is3> -> set up display memory (2 pages) 9048# 9049# The display memory may be used for either text or graphics. 9050# When "Display Memory = Shared" the terminal will have more pages 9051# but garbage may be left on the screen when you switch from 9052# graphics to text. If "Display Memory = Unshared" then the 9053# text area will be only one page long. 9054# 9055# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid 9056# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 9057wy160|wyse160|Wyse 160, 9058 am, bw, hs, km, mc5i, mir, msgr, 9059 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 9060 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9061 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 9062 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9063 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 9064 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, 9065 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, 9066 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 9067 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9068 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9069 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9070 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9071 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9072 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9073 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 9074 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 9075 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 9076 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9077 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9078 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 9079 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 9080 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 9081 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, 9082 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9083 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9084 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 9085 tbc=\E0, tsl=\EF, use=adm+sgr, 9086# 9087wy160-w|wyse160-w|wyse 160 132-column, 9088 cols#132, lw#7, nlab#16, wsl#90, 9089 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 9090 rs2=\EeF$<150>\E`;$<150>, use=wy160, 9091# 9092wy160-25|wyse160-25|wyse 160 80-column 25-lines, 9093 lh@, lines#25, lw@, nlab@, 9094 pln@, rs3=\EwG\Ee)$<200>, use=wy160, 9095wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, 9096 lh@, lines#25, lw@, nlab@, 9097 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 9098# 9099wy160-42|wyse160-42|wyse 160 80-column 42-lines, 9100 lines#42, 9101 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 9102 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 9103 rs3=\Ee*$<150>, use=wy160, 9104wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, 9105 cols#132, lw#7, nlab#16, wsl#90, 9106 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 9107 rs2=\EeF$<150>\E`;$<150>, use=wy160-42, 9108# 9109wy160-43|wyse160-43|wyse 160 80-column 43-lines, 9110 lh@, lines#43, lw@, nlab@, 9111 pln@, rs3=\Ee+$<150>, use=wy160-42, 9112wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, 9113 lh@, lines#43, lw@, nlab@, 9114 pln@, rs3=\Ee+$<150>, use=wy160-42-w, 9115# 9116wy160-vb|wyse160-vb|Wyse 160 visible bell, 9117 bel@, use=wy160, 9118wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 9119 bel@, use=wy160-w, 9120# 9121# The Wyse 75 is a vt100 lookalike without advanced video. 9122# 9123# The Wyse 75 can support one attribute (e.g. Dim, Inverse, 9124# Underline) without magic cookies. The following description 9125# uses this capability, but when more than one attribute is 9126# put on the screen at once, all attributes will be changed 9127# to be the same as the last attribute given. 9128# The Wyse 75 can support more attributes when used with magic 9129# cookies. The wy75-mc terminal description uses magic cookies 9130# to correctly handle multiple attributes on a screen. 9131# 9132wy75|wyse75|wyse 75, 9133 am, hs, mc5i, mir, msgr, xenl, xon, 9134 cols#80, lines#24, ma#1, pb#1201, wsl#78, 9135 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9136 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, 9137 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, 9138 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 9139 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9140 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 9141 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, 9142 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, 9143 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, 9144 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, 9145 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9146 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 9147 ind=\n$<2>, ip=$<1>, 9148 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 9149 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, 9150 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, 9151 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9152 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9153 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 9154 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 9155 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 9156 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 9157 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 9158 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 9159 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 9160 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 9161 sc=\E7, 9162 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, 9163 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9164 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 9165 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, 9166# 9167# This terminal description uses the non-hidden attribute mode 9168# (with magic cookie). 9169# 9170wy75-mc|wyse75-mc|wyse 75 with magic cookies, 9171 msgr@, 9172 ma@, xmc#1, 9173 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 9174 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 9175 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, 9176 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 9177 use=wy75, 9178wy75-vb|wyse75-vb|wyse 75 with visible bell, 9179 pb@, 9180 bel@, use=wy75, 9181wy75-w|wyse75-w|wyse 75 in 132 column mode, 9182 cols#132, wsl#130, 9183 rs2=\E[35h\E[?3h$<80>, use=wy75, 9184wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, 9185 pb@, 9186 bel@, use=wy75-w, 9187# 9188# Wyse 85 emulating a vt220 7 bit mode. 9189# 24 line screen with status line. 9190# 9191# The vt220 mode permits more function keys but it wipes out 9192# the escape key. I strongly recommend that <f11> be set to 9193# escape (esc). 9194# The terminal may have to be set for 8 data bits and 2 stop 9195# bits for the arrow keys to work. 9196# The Wyse 85 runs faster with XON/XOFF enabled. Also the 9197# <dch> and <ich> work best when XON/XOFF is set. <ich> and 9198# <dch> leave trash on the screen when used without XON/XOFF. 9199# 9200wy85|wyse85|wyse 85, 9201 am, hs, mc5i, mir, msgr, xenl, xon, 9202 cols#80, it#8, lines#24, wsl#80, 9203 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9204 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9205 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9206 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9207 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9208 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9209 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9210 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9211 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9212 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9213 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9214 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9215 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9216 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9217 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 9218 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, 9219 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 9220 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 9221 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, 9222 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 9223 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 9224 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9225 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9226 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9227 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9228 rs3=\E[?5l, sc=\E7, 9229 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9230 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9231 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9232 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, 9233# 9234# Wyse 85 with visual bell. 9235wy85-vb|wyse85-vb|wyse 85 with visible bell, 9236 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, 9237# 9238# Wyse 85 in 132-column mode. 9239wy85-w|wyse85-w|wyse 85 in 132-column mode, 9240 cols#132, wsl#132, 9241 rs2=\E[35h\E[?3h$<70>, use=wy85, 9242# 9243# Wyse 85 in 132-column mode with visual bell. 9244wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, 9245 bel@, use=wy85-w, 9246 9247# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998 9248# This copes with an apparent firmware bug in the wy85. He writes: 9249# "What I did was change leave the terminal cursor keys set to Normal 9250# (instead of application), and change \E[ to \233 for all the keys in 9251# terminfo. At one point, I found some reference indicating that this 9252# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just 9253# me), but I can't find that and the server under my bookmark to "Wyse 9254# Technical" isn't responding. So there's the question of wether the wy85 9255# terminfo should reflect the manufactuer's intended behaviour of the terminal 9256# or the actual." 9257wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, 9258 am, hs, mc5i, mir, msgr, xenl, xon, 9259 cols#80, it#8, lines#24, wsl#80, 9260 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9261 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9262 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9263 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9264 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9265 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9266 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9267 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9268 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9269 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9270 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9271 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9272 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9273 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9274 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 9275 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, 9276 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, 9277 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 9278 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, 9279 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, 9280 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, 9281 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, 9282 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, 9283 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9284 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9285 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9286 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9287 rs3=\E[?5l, sc=\E7, 9288 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, 9289 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9290 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9291 tsl=\E[40h\E7\E[25;%i%p1%dH, 9292# 9293# Wyse 185 emulating a vt320 7 bit mode. 9294# 9295# This terminal always displays 25 lines. These lines may be used 9296# as 24 data lines and a terminal status line (top or bottom) or 9297# 25 data lines. The 48 and 50 line modes change the page size 9298# and not the number of lines on the screen. 9299# 9300# The Compose Character key can be used as a meta key if changed 9301# by set-up. 9302# 9303wy185|wyse185|wyse 185, 9304 am, hs, km, mc5i, mir, msgr, xenl, xon, 9305 cols#80, it#8, lines#24, wsl#80, 9306 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9307 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9308 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9309 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 9310 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9311 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9312 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 9313 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 9314 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 9315 el=\E[K, el1=\E[1K, enacs=\E)0, 9316 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, 9317 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 9318 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 9319 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 9320 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 9321 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9322 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 9323 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 9324 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 9325 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, 9326 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9327 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, 9328 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, 9329 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 9330 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 9331 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 9332 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 9333 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 9334 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9335 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 9336 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 9337 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 9338 use=vt220+keypad, 9339# 9340# Wyse 185 with 24 data lines and top status (terminal status) 9341wy185-24|wyse185-24|wyse 185 with 24 data lines, 9342 hs@, 9343 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9344 use=wy185, 9345# 9346# Wyse 185 with visual bell. 9347wy185-vb|wyse185-vb|wyse 185+flash, 9348 bel@, use=wy185, 9349# 9350# Wyse 185 in 132-column mode. 9351wy185-w|wyse185-w|wyse 185 in 132-column mode, 9352 cols#132, wsl#132, 9353 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9354 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, 9355# 9356# Wyse 185 in 132-column mode with visual bell. 9357wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, 9358 bel@, use=wy185-w, 9359 9360# wy325 terminfo entries 9361# Done by Joe H. Davis 3-9-92 9362 9363# lines 25 columns 80 9364# 9365wy325|wyse325|Wyse epc, 9366 am, bw, hs, mc5i, mir, 9367 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 9368 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9369 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 9370 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9371 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 9372 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 9373 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 9374 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 9375 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9376 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9377 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9378 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9379 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9380 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9381 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 9382 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 9383 mc0=\EP, mc4=^T, mc5=\Ed#, 9384 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9385 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9386 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 9387 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 9388 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 9389 rs3=\EwG\Ee($<100>, 9390 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9391 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9392 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 9393 tsl=\EF, use=adm+sgr, 9394 9395# 9396# lines 24 columns 80 vb 9397# 9398wy325-vb|wyse325-vb|wyse-325 with visual bell, 9399 bel@, use=wy325, 9400 9401# 9402# lines 24 columns 132 9403# 9404wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, 9405 cols#132, lw#7, nlab#16, wsl#97, 9406 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 9407 rs2=\E`;$<70>, use=wy325, 9408# 9409# lines 25 columns 80 9410# 9411wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, 9412 lh@, lines#25, lw@, nlab@, 9413 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 9414# 9415# lines 25 columns 132 9416# 9417wy325-25w|wyse325-25w|wy325 132 columns, 9418 lh@, lines#25, lw@, nlab@, 9419 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9420# 9421# lines 25 columns 132 vb 9422# 9423wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, 9424 bel@, use=wy325-w, 9425 9426# 9427# lines 42 columns 80 9428# 9429wy325-42|wyse325-42|wyse-325 42 lines, 9430 lh@, lines#42, lw@, nlab@, 9431 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 9432# 9433# lines 42 columns 132 9434# 9435wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, 9436 lh@, lines#42, lw@, nlab@, 9437 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9438# 9439# lines 42 columns 132 vb 9440# 9441wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, 9442 bel@, use=wy325-w, 9443# 9444# lines 43 columns 80 9445# 9446wy325-43|wyse325-43|wyse-325 43 lines, 9447 lh@, lines#43, lw@, nlab@, 9448 pln@, use=wy325, 9449# 9450# lines 43 columns 132 9451# 9452wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, 9453 lh@, lines#43, lw@, nlab@, 9454 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9455# 9456# lines 43 columns 132 vb 9457# 9458wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, 9459 bel@, use=wy325-w, 9460 9461# Wyse 370 -- 24 line screen with status line. 9462# 9463# The terminal may have to be set for 8 data bits and 2 stop 9464# bits for the arrow keys to work. 9465# 9466# If you change keyboards the terminal will send different 9467# escape sequences. 9468# The following definition is for the basic terminal without 9469# function keys. 9470# 9471# <u0> -> enter Tektronix 4010/4014 mode 9472# <u1> -> exit Tektronix 4010/4014 mode 9473# <u2> -> enter ASCII mode (from any ANSI mode) 9474# <u3> -> exit ASCII mode (goto native ANSI mode) 9475# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) 9476# <u5> -> exit Tek 4207 mode (goto native ANSI mode) 9477# 9478# Bug: The <op> capability resets attributes. 9479wy370-nk|wyse 370 without function keys, 9480 am, ccc, hs, mc5i, mir, msgr, xenl, xon, 9481 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 9482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9483 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9484 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9485 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9486 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9487 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9488 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 9489 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 9490 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 9491 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 9492 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, 9493 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 9494 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 9495 ind=\n$<2>, 9496 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, 9497 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 9498 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 9499 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 9500 mc5=\E[5i, 9501 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, 9502 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 9503 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 9504 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 9505 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 9506 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 9507 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9508 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 9509 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 9510 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 9511 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 9512 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 9513# 9514# Function key set for the ASCII (wy-50 compatible) keyboard 9515# This is the default 370. 9516# 9517wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 9518 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9519 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 9520 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 9521 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 9522 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 9523 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 9524 knp=\E[U, kpp=\E[V, use=wy370-nk, 9525# 9526# Function key set for the VT-320 (and wy85) compatible keyboard 9527# 9528wy370-105k|Wyse 370 with 105 key keyboard, 9529 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9530 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9531 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9532 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 9533 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 9534 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 9535 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 9536 use=wy370-nk, use=vt220+keypad, 9537# 9538# Function key set for the PC compatible keyboard 9539# 9540wy370-EPC|Wyse 370 with 102 key keyboard, 9541 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9542 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 9543 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 9544 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9545 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, 9546# 9547# Wyse 370 with visual bell. 9548wy370-vb|Wyse 370 with visible bell, 9549 bel@, use=wy370, 9550# 9551# Wyse 370 in 132-column mode. 9552wy370-w|Wyse 370 in 132-column mode, 9553 cols#132, wsl#132, 9554 rs2=\E[35h\E[?3h$<70>, use=wy370, 9555# 9556# Wyse 370 in 132-column mode with visual bell. 9557wy370-wvb|Wyse 370 with visible bell 132-columns, 9558 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, 9559wy370-rv|Wyse 370 reverse video, 9560 rs3=\E[32h\E[?5h, use=wy370, 9561# 9562# Wyse 99gt Tektronix 4010/4014 emulator, 9563# 9564wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 9565 am, os, 9566 cols#74, lines#35, 9567 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 9568 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 9569 cuu1=^K, ff=^L, 9570 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 9571 home=^]7`x @\037, 9572 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 9573 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, 9574# 9575# Wyse 160 Tektronix 4010/4014 emulator, 9576# 9577wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 9578 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 9579 home=^]8`g @\037, use=wy99gt-tek, 9580# 9581# Wyse 370 Tektronix 4010/4014 emulator, 9582# 9583wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 9584 am, os, 9585 cols#80, lines#36, 9586 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 9587 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 9588 cuu1=^K, ff=^L, 9589 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 9590 home=^]8g @\037, 9591 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 9592 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, 9593 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, 9594 9595# Vendor-supplied Wyse entries end here. 9596 9597# 9598#TITLE: TERMINFO ENTRY WY520 9599#DATE: 8/5/93 9600# The WY520 terminfo is based on the WY285 entry published on the WYSE 9601# BBS with the addition of more function keys and special keys. 9602# 9603# rs1 -> set personality 9604# rs2 -> set number of columns 9605# rs3 -> set number of lines 9606# is1 -> select the proper font 9607# is2 -> do the initialization 9608# is3 -> If this string is empty then rs3 gets sent. 9609# 9610# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard 9611# - The BS key is programmed to generate BS in smcup since 9612# is2 doesn't seem to work. 9613# - Remove and shift/Remove: delete a character 9614# - Insert : enter insert mode 9615# - Find : delete to end of file 9616# - Select : clear a line 9617# - F11, F12, F13: send default sequences (not ESC, BS, LF) 9618# - F14 : Home key 9619# - Bottom status line (host writable line) is used. 9620# - smkx,rmkx are removed because this would put the numeric 9621# keypad in Dec application mode which doesn't seem to work 9622# with SCO applications. 9623# 9624wy520|wyse520|wyse 520, 9625 am, hs, km, mc5i, mir, xenl, xon, 9626 cols#80, it#8, lines#24, wsl#80, 9627 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9628 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9629 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9630 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 9631 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9632 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9633 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 9634 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 9635 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 9636 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 9637 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 9638 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 9639 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 9640 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9641 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, 9642 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, 9643 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 9644 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 9645 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 9646 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, 9647 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, 9648 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 9649 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, 9650 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, 9651 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 9652 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 9653 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9654 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 9655 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 9656 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 9657 vpa=\E[%i%p1%dd, use=vt220+keypad, 9658# 9659# Wyse 520 with 24 data lines and status (terminal status) 9660wy520-24|wyse520-24|wyse 520 with 24 data lines, 9661 hs@, 9662 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9663 use=wy520, 9664# 9665# Wyse 520 with visual bell. 9666wy520-vb|wyse520-vb|wyse 520 with visible bell, 9667 flash=\E[30h\E\,\E[30l$<100>, use=wy520, 9668# 9669# Wyse 520 in 132-column mode. 9670wy520-w|wyse520-w|wyse 520 in 132-column mode, 9671 cols#132, wsl#132, 9672 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9673 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, 9674# 9675# Wyse 520 in 132-column mode with visual bell. 9676wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, 9677 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, 9678# 9679# 9680# Wyse 520 emulating a vt420 7 bit mode. 9681# The DEL key is programmed to generate BS in is2. 9682# With EPC keyboard. 9683# - 'End' key will clear till end of line on EPC keyboard 9684# - Shift/End : ignored. 9685# - Insert : enter insert mode. 9686# - Delete : delete a character (have to change interrupt character 9687# to CTRL-C: stty intr '^c') for it to work since the 9688# Delete key sends 7FH. 9689wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, 9690 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 9691 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 9692 use=wy520, 9693# 9694# Wyse 520 with 24 data lines and status (terminal status) 9695# with EPC keyboard. 9696wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, 9697 hs@, 9698 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9699 use=wy520-epc, 9700# 9701# Wyse 520 with visual bell. 9702wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, 9703 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, 9704# 9705# Wyse 520 in 132-column mode. 9706wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, 9707 cols#132, wsl#132, 9708 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9709 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, 9710# 9711# Wyse 520 in 132-column mode with visual bell. 9712wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, 9713 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, 9714# 9715# Wyse 520 in 80-column, 36 lines 9716wy520-36|wyse520-36|wyse 520 with 36 data lines, 9717 hs@, 9718 lines#36, 9719 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 9720 use=wy520, 9721# 9722# Wyse 520 in 80-column, 48 lines 9723wy520-48|wyse520-48|wyse 520 with 48 data lines, 9724 hs@, 9725 lines#48, 9726 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 9727 use=wy520, 9728# 9729# Wyse 520 in 132-column, 36 lines 9730wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, 9731 cols#132, wsl#132, 9732 rs2=\E[?3h, 9733 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 9734 use=wy520-36, 9735# 9736# Wyse 520 in 132-column, 48 lines 9737wy520-48w|wyse520-48w|wyse 520 with 48 data lines, 9738 cols#132, wsl#132, 9739 rs2=\E[?3h, 9740 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 9741 use=wy520-48, 9742# 9743# 9744# Wyse 520 in 80-column, 36 lines with EPC keyboard 9745wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, 9746 hs@, 9747 lines#36, 9748 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 9749 use=wy520-epc, 9750# 9751# Wyse 520 in 80-column, 48 lines with EPC keyboard 9752wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, 9753 hs@, 9754 lines#48, 9755 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 9756 use=wy520-epc, 9757# 9758# Wyse 520 in 132-column, 36 lines with EPC keyboard 9759wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, 9760 cols#132, wsl#132, 9761 rs2=\E[?3h, 9762 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 9763 use=wy520-36pc, 9764# 9765# Wyse 520 in 132-column, 48 lines with EPC keyboard 9766wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, 9767 cols#132, wsl#132, 9768 rs2=\E[?3h, 9769 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 9770 use=wy520-48pc, 9771 9772# From: John Gilmore <hoptoad!gnu@lll-crg.arpa> 9773# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such 9774# file and we don't know what <hts> is -- esr) 9775wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 9776 OTbs, am, 9777 cols#80, it#8, lines#24, 9778 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 9779 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 9780 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, 9781 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, 9782 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, 9783 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, 9784 smul=^N, 9785 9786wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 9787 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 9788 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9789 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, 9790 use=wy75, 9791 9792# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> 9793wy100q|Wyse 100 for Quotron, 9794 OTbs, 9795 cols#80, lines#24, xmc#1, 9796 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, 9797 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 9798 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, 9799 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, 9800 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, 9801 9802#### Kermit terminal emulations 9803# 9804# Obsolete Kermit versions may be listed in the section describing obsolete 9805# non-ANSI terminal emulators later in the file. 9806# 9807 9808# KERMIT standard all versions. 9809# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9810# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9811# From: greg small <gts@populi.berkeley.edu> 9-25-84 9812kermit|standard kermit, 9813 OTbs, 9814 cols#80, lines#24, 9815 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 9816 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 9817 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, 9818 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 9819kermit-am|standard kermit plus auto-margin, 9820 am, 9821 is2=K1 Standard Kermit plus Automatic Margins\n, 9822 use=kermit, 9823# IBMPC Kermit 1.2. 9824# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does 9825# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of 9826# line). 9827# From: greg small <gts@populi.berkeley.edu> 8-30-84 9828pckermit|pckermit12|UCB IBMPC Kermit 1.2, 9829 am, 9830 lines#25, 9831 clear=\EH\EJ, ed@, el@, 9832 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, 9833# IBMPC Kermit 1.20 9834# Cannot use line 25, now acts funny like ansi special scrolling region. 9835# Initialization must escape from that region by cursor position to line 24. 9836# Cannot use character insert because 1.20 goes crazy if insert at col 80. 9837# Does not use :am: because autowrap is lost when kermit dropped and restarted. 9838# From: greg small <gts@populi.berkeley.edu> 12-19-84 9839pckermit120|UCB IBMPC Kermit 1.20, 9840 it#8, lines#24, 9841 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, 9842 il1=\EL, 9843 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, 9844 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, 9845# MS-DOS Kermit 2.27 for the IBMPC 9846# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9847# Cannot use line 25, now acts funny like ansi special scrolling region. 9848# Initialization must escape from that region by cursor position to line 24. 9849# Does not use am: because autowrap is lost when kermit dropped and restarted. 9850# Reverse video for standout like H19. 9851# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9852# From: greg small <gts@populi.berkeley.edu> 3-17-85 9853msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 9854 OTbs, am@, 9855 cols#80, it#8, lines#24, 9856 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 9857 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 9858 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, 9859 home=\EH, ht=^I, il1=\EL, 9860 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, 9861 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, 9862 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, 9863# MS-DOS Kermit 2.27 with automatic margins 9864# From: greg small <gts@populi.berkeley.edu> 3-17-85 9865msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 9866 am, 9867 cvvis=\EO\Eq\EG\EvK5, 9868 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, 9869 use=msk227, 9870# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC 9871# Automatic margins now default. Use ansi <sgr> for highlights. 9872# Define function keys. 9873# (msk22714: removed obsolete ":kn#10:" -- esr) 9874# From: greg small <gts@populi.berkeley.edu> 3-17-85 9875msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 9876 am, 9877 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 9878 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, 9879 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 9880 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, 9881 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, 9882# This was designed for a VT320 emulator, but it is probably a good start 9883# at support for the VT320 itself. 9884# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. 9885# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) 9886vt320-k3|MS-Kermit 3.00's vt320 emulation, 9887 am, eslok, hs, km, mir, msgr, xenl, 9888 cols#80, it#8, lines#49, pb#9600, vt#3, 9889 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9890 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9891 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, 9892 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9893 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9894 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9895 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9896 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 9897 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, 9898 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9899 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 9900 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, 9901 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, 9902 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9903 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 9904 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, 9905 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, 9906 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 9907 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, 9908 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 9909 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9910 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, 9911# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991 9912# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996 9913# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) 9914vt320-k311|dec vt320 series as defined by kermit 3.11, 9915 am, eslok, hs, mir, msgr, xenl, xon, 9916 cols#80, it#8, lines#24, vt#3, 9917 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9918 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9919 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, 9920 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9921 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9922 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9923 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9924 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 9925 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, 9926 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, 9927 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 9928 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9929 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9930 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 9931 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 9932 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, 9933 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 9934 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 9935 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 9936 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 9937 9938######## NON-ANSI TERMINAL EMULATIONS 9939# 9940 9941#### Avatar 9942# 9943# These entries attempt to describe Avatar, a terminal emulation used with 9944# MS-DOS bulletin-board systems. It was designed to give ANSI-like 9945# capabilities, but with cheaper (shorter) control sequences. Messy design, 9946# excessively dependent on PC idiosyncracies, but apparently rather popular 9947# in the BBS world. 9948# 9949# No color support. Avatar doesn't fit either of the Tektronix or HP color 9950# models that terminfo knows about. An Avatar color attribute is the 9951# low 7 bits of the IBM-PC display-memory attribute. Bletch. 9952# 9953# I wrote these entries while looking at the Avatar spec. I don't have 9954# the facilities to test them. Let me know if they work, or don't. 9955# 9956# Avatar escapes not used by these entries (because maybe you're smarter 9957# and more motivated than I am and can figure out how to wrap terminfo 9958# around some of them, and because they are weird enough to be funny): 9959# level 0: 9960# ^L -- clear window/reset current attribute to default 9961# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: 9962# 9963# bit: 6 5 4 3 2 1 0 9964# | | | | | 9965# +---+---+ | +---+---+ 9966# | | | 9967# | | foreground color 9968# | foreground intensity 9969# background color 9970# level 0+: 9971# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines 9972# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines 9973# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 9974# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 9975# (^V^L and ^V^M set the current attribute as a side-effect.) 9976# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes 9977# in the pattern, <c> the number of times the pattern 9978# should be repeated. If either value is 0, no-op. 9979# The pattern can contain Avatar console codes, 9980# including other ^V ^Y patterns. 9981# level 1: 9982# ^V^O -- clockwise mode on; turn print direction right each time you 9983# hit a window edge (yes, really). Turned off by CR 9984# ^V^P -- no-op 9985# ^V^Q%c -- query the driver 9986# ^V^R -- driver reset 9987# ^V^S -- Sound tone (PC-specific) 9988# ^V^T -- change highlight at current cursor poition to %c 9989# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> 9990# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c 9991# -- define window 9992# 9993# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 9994# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to 9995# tell ncurses that the corresponding highlights exist; it should use <sgr>, 9996# which is the only method that will actually work for multiple highlights.) 9997# 9998# Update by TD - 2004: half of this was inconsistent. Found documentation 9999# and repaired most of the damage. sgr0 is probably incorrect, but the 10000# available documentation gives no clues for a workable string. 10001avatar0|avatar terminal emulator level 0, 10002 am, bce, msgr, 10003 cols#80, it#8, lines#25, 10004 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, 10005 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, 10006 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, 10007 rmacs@, rs2=^L, 10008 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, 10009 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, 10010 use=klone+acs, 10011# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10012avatar0+|avatar terminal emulator level 0+, 10013 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, 10014# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10015avatar|avatar1|avatar terminal emulator level 1, 10016 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, 10017 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, 10018 10019#### RBcomm 10020# 10021# RBComm is a lean and mean terminal emulator written by the Interrupt List 10022# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early 10023# '90s), especially in the BBS world, and still has some loyal users due to 10024# its very small memory footprint and to a cute macro language. 10025rbcomm|IBM PC with RBcomm and EMACS keybindings, 10026 am, bw, mir, msgr, xenl, 10027 cols#80, it#8, lines#25, 10028 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10029 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10030 cub1=^H, cud1=^C, cuf1=^B, 10031 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, 10032 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 10033 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 10034 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 10035 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, 10036 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, 10037 rmir=^], rmkx=\E>, rmso=^U, rmul=^U, 10038 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, 10039 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, 10040rbcomm-nam|IBM PC with RBcomm without autowrap, 10041 am@, 10042 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10043 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, 10044 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10045rbcomm-w|IBM PC with RBcomm in 132 column mode, 10046 cols#132, 10047 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10048 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, 10049 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10050 10051######## LCD DISPLAYS 10052# 10053 10054#### Matrix Orbital 10055# from: Eric Z. Ayers (eric@ale.org) 10056# 10057# Matrix Orbital 20x4 LCD display 10058# Command Character is 0xFE (decimal 254, octal 376) 10059# 10060# On this device, cursor addressability isn't possible. The LCD expects: 10061# 0xfe G <col> <row> 10062# for cup: %p1 == row and %p2 is column 10063# 10064# This line: 10065# cup=\376G%p2%c%p1%c 10066# LOOKS like it will work, but sometimes only one of the two numbers is sent. 10067# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. 10068# 10069# Alas, there is no cursor upline capability on this display. 10070# 10071# These entries add some 'sanity stuff' to the clear function. That is, it 10072# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, 10073# and turns off the cursor blinking and stuff like that. 10074# 10075# NOTE: calling 'beep' turns on the backlight (bell) 10076# NOTE: calling 'flash' turns it on and back off (visual bell) 10077# 10078MtxOrb|Generic Matrix Orbital LCD display, 10079 bel=\376B^A, clear=\376X\376C\376R\376K\376T, 10080 cnorm=\376K\376T, cub1=\376L, cuf1=\376M, 10081 flash=\376B\001$<200>\376F, home=\376H, 10082MtxOrb204|20x4 Matrix Orbital LCD display, 10083 cols#20, lines#4, use=MtxOrb, 10084MtxOrb162|16x2 Matrix Orbital LCD display, 10085 cols#16, lines#2, use=MtxOrb, 10086# The end 10087 10088######## OLDER TERMINAL TYPES 10089# 10090# This section is devoted to older commercial terminal brands that are now 10091# discontinued, but known to be still in use or represented by emulations. 10092# 10093 10094#### AT&T (att, tty) 10095# 10096# This section also includes Teletype-branded VDTs. 10097# 10098# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now 10099# Boundless Technologies); for details, see the header comment on the ADDS 10100# section. 10101# 10102# These are AT&T's official terminfo entries. All-caps aliases have been 10103# removed. 10104# 10105att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, 10106 am, eo, mir, msgr, xon, 10107 cols#80, it#8, lines#24, 10108 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, 10109 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10110 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10111 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10112 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 10113 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, 10114 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10115 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, 10116 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, 10117 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, 10118 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, 10119 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 10120 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, 10121 smso=\E[7m, 10122att2350|AT&T 2350 Video Information Terminal 80 column mode, 10123 mc0@, mc4@, mc5@, use=att2300, 10124 10125# Must setup RETURN KEY - CR, REC'VD LF - INDEX. 10126# Seems upward compatible with vt100, plus ins/del line/char. 10127# On sgr, the protection parameter is ignored. 10128# No check is made to make sure that only 3 parameters are output. 10129# standout= reverse + half-intensity = 3 | 5. 10130# bold= reverse + underline = 2 | 3. 10131# note that half-bright blinking doesn't look different from normal blinking. 10132# NOTE:you must program the function keys first, label second! 10133# (att4410: a BSD entry has been seen with the following capabilities: 10134# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, 10135# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) 10136att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, 10137 am, hs, mir, msgr, xon, 10138 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10139 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10140 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, 10141 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 10142 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, 10143 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, 10144 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, 10145 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, 10146 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10147 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 10148 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, 10149 ll=\E[24H, nel=^M^J, 10150 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, 10151 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 10152 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 10153 sc=\E7, 10154 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10155 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 10156 tsl=\E7\E[25;%p1%{1}%+%dH, 10157 10158att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, 10159 cols#132, wsl#132, 10160 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, 10161 10162att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, 10163 OTbs, 10164 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, 10165 use=att5410v1, 10166 10167att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, 10168 cols#132, wsl#132, 10169 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, 10170 10171# 5410 in terms of a vt100 10172# (v5410: added <rmam>/<smam> based on init string -- esr) 10173v5410|att5410 in terms of a vt100, 10174 am, mir, msgr, xon, 10175 cols#80, it#8, lines#24, vt#3, 10176 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10177 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 10178 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10179 cub1=^H, cud1=^J, cuf1=\E[C$<2>, 10180 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, 10181 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 10182 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, 10183 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 10184 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, 10185 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 10186 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 10187 sc=\E7, 10188 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 10189 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 10190 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 10191 use=vt100+fnkeys, 10192 10193# 10194# Teletype Model 5420 -- A souped up 5410, with multiple windows, 10195# even! the 5420 has three modes: scroll, window or page mode 10196# this terminfo should work in scroll or window mode, but doesn't 10197# take advantage of any of the differences between them. 10198# 10199# Has memory below (2 lines!) 10200# 3 pages of memory (plus some spare) 10201# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, 10202# <hpa>, <hts> would work for these, but these work in both scroll and window 10203# mode... Unset insert character so insert mode works 10204# <is1> sets 80 column mode, 10205# <is2> escape sequence: 10206# 1) turn off all fonts 10207# 2) function keys off, keyboard lock off, control display off, 10208# insert mode off, erasure mode off, 10209# 3) full duplex, monitor mode off, send graphics off, nl on lf off 10210# 4) reset origin mode 10211# 5) set line wraparound 10212# 6) exit erasure mode, positional attribute mode, and erasure extent mode 10213# 7) clear margins 10214# 8) program ENTER to transmit ^J, 10215# We use \212 to program the ^J because a bare ^J will get translated by 10216# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. 10217# 1 2 3 4 5 6 7 8 10218# <is3> set screen color to black, 10219# No representation in terminfo for the delete word key: kdw1=\Ed 10220# Key capabilities assume the power-up send sequence... 10221# This <rmcup> is not strictly necessary, but it helps maximize 10222# memory usefulness: <rmcup=\Ez>, 10223# Alternate sgr0: <sgr0=\E[m\EW^O>, 10224# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, 10225# smkx programs the SYS PF keys to send a set sequence. 10226# It also sets up labels f1, f2, ..., f8, and sends edit keys. 10227# This string causes them to send the strings <kf1>-<kf8> 10228# when pressed in SYS PF mode. 10229# (att4415: I added <rmam>/<smam> based on the init string -- esr) 10230att4415|tty5420|att5420|AT&T 4415/5420 80 cols, 10231 OTbs, db, mir, xon, 10232 lh#2, lm#78, lw#8, nlab#8, wsl#55, 10233 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, 10234 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, 10235 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, 10236 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, 10237 flash=\E[?5h$<200>\E[?5l, home=\E[x, 10238 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, 10239 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, 10240 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, 10241 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, 10242 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, 10243 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10244 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 10245 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10246 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, 10247 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, 10248 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, 10249 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, 10250 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, 10251 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, 10252 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10253 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, 10254 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, 10255 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 10256 use=att4410, 10257 10258att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, 10259 cols#132, lm#54, wsl#97, 10260 is1=\E[?3h$<100>, use=att4415, 10261 10262att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, 10263 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, 10264 10265att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, 10266 cols#132, lm#54, wsl#97, 10267 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, 10268 use=att4415, 10269 10270# Note that this mode permits programming USER PF KEYS and labels 10271# However, when you program user pf labels you have to reselect 10272# user pf keys to make them appear! 10273att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, 10274 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 10275 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, 10276 pln=\E[%p1%d;0;0;1q%p2%:-16.16s, 10277 10278att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, 10279 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10280 use=att4415, 10281 10282att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, 10283 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10284 use=att4415-rv, 10285 10286att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, 10287 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10288 use=att4415-w, 10289 10290att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, 10291 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10292 use=att4415-w-rv, 10293 10294att5420_2|AT&T 5420 model 2 80 cols, 10295 am, db, hs, mir, msgr, xon, 10296 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 10297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10298 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, 10299 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10300 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 10301 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 10302 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10303 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, 10304 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 10305 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, 10306 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10307 indn=\E[%p1%dE, invis=\E[8m, 10308 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 10309 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, 10310 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 10311 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, 10312 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, 10313 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 10314 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10315 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, 10316 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, 10317 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, 10318 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, 10319 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, 10320 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 10321 sc=\E7, 10322 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10323 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, 10324 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 10325 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 10326att5420_2-w|AT&T 5420 model 2 in 132 column mode, 10327 cols#132, 10328 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 10329 use=att5420_2, 10330 10331att4418|att5418|AT&T 5418 80 cols, 10332 am, xon, 10333 cols#80, lines#24, 10334 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10335 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, 10336 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 10337 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 10338 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 10339 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 10340 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, 10341 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, 10342 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, 10343 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, 10344 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, 10345 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, 10346 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, 10347 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, 10348 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 10349att4418-w|att5418-w|AT&T 5418 132 cols, 10350 cols#132, 10351 is1=\E[?3h, use=att5418, 10352 10353att4420|tty4420|teletype 4420, 10354 OTbs, da, db, eo, msgr, ul, xon, 10355 cols#80, lines#24, lm#72, 10356 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, 10357 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 10358 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, 10359 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, 10360 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, 10361 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, 10362 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, 10363 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, 10364 10365# The following is a terminfo entry for the Teletype 4424 10366# asynchronous keyboard-display terminal. It supports 10367# the vi editor. The terminal must be set up as follows, 10368# 10369# HIGHLIGHT DEFINITION 3-TONE 10370# DISPLAY FUNCTION GROUP III 10371# 10372# The second entry below provides limited (a la adm3a) 10373# operation under GROUP II. 10374# 10375# This must be used with DISPLAY FUNCTION GROUP I or III 10376# and HIGHLIGHT DEFINITION 3-TONE 10377# The terminal has either bold or blink, depending on options 10378# 10379# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) 10380att4424|tty4424|teletype 4424, 10381 OTbs, am, xon, 10382 cols#80, lines#24, 10383 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10384 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, 10385 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10386 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, 10387 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, 10388 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, 10389 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 10390 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, 10391 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10392 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 10393 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, 10394 rmul=\EZ, 10395 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, 10396 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, 10397 tbc=\EF, 10398 10399att4424-1|tty4424-1|teletype 4424 in display function group I, 10400 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, 10401 use=att4424, 10402 10403# This entry is not one of AT&T's official ones, it was translated from the 10404# 4.4BSD termcap file. The highlight strings are different from att4424. 10405# I have no idea why this is -- older firmware version, maybe? 10406# The following two lines are the comment originally attached to the entry: 10407# This entry appears to avoid the top line - I have no idea why. 10408# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp 10409att4424m|tty4424m|teletype 4424M, 10410 am, da, db, mir, 10411 cols#80, it#8, lines#23, 10412 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 10413 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, 10414 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, 10415 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, 10416 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 10417 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, 10418 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 10419 10420# The Teletype 5425 is really version 2 of the Teletype 5420. It 10421# is quite similar, except for some minor differences. No page 10422# mode, for example, so all of the <cup> sequences used above have 10423# to change back to what's being used for the 5410. Many of the 10424# option settings have changed their numbering as well. 10425# 10426# This has been tested on a preliminary model. 10427# 10428# (att5425: added <rmam>/<smam> based on the init string -- esr) 10429att5425|tty5425|att4425|AT&T 4425/5425, 10430 am, da, db, hs, mir, msgr, xenl, xon, 10431 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 10432 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10433 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10434 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, 10435 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10436 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10437 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10438 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10439 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, 10440 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 10441 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 10442 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 10443 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, 10444 invis=\E[8m, is1=\E<\E[?3l$<100>, 10445 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, 10446 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, 10447 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10448 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, 10449 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, 10450 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, 10451 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, 10452 nel=^M^J, 10453 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10454 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, 10455 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 10456 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, 10457 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, 10458 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10459 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10460 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, 10461 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, 10462 vpa=\E[%p1%{1}%+%dd, 10463 10464att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, 10465 smkx=\E[21;1j\E[25;4j\Eent, use=att4425, 10466 10467att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, 10468 cols#132, lm#54, wsl#97, 10469 is1=\E[?3h$<100>, use=tty5425, 10470 10471# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 10472# I also added <rmam>/<smam> -- esr) 10473att4426|tty4426|teletype 4426S, 10474 am, da, db, xon, 10475 cols#80, lines#24, lm#48, 10476 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10477 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, 10478 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 10479 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10480 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, 10481 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, 10482 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, 10483 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, 10484 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, 10485 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 10486 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 10487 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, 10488 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, 10489 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 10490 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, 10491 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, 10492 vpa=\E[%p1%dd, 10493 10494# Terminfo entry for the AT&T 510 A Personal Terminal 10495# Function keys 9 - 16 are available only after the 10496# screen labeled (soft keys/action blocks) are labeled. Function key 10497# 9 corresponds to the leftmost touch target on the screen, 10498# function key 16 corresponds to the rightmost. 10499# 10500# This entry is based on one done by Ernie Rice at Summit, NJ and 10501# changed by Anne Gallup, Skokie, IL, ttrdc!anne 10502att510a|bct510a|AT&T 510A Personal Terminal, 10503 am, mir, msgr, xenl, xon, 10504 cols#80, lh#2, lines#24, lw#7, nlab#8, 10505 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10506 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10507 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, 10508 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 10509 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10510 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, 10511 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, 10512 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, 10513 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, 10514 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, 10515 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, 10516 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, 10517 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, 10518 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, 10519 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, 10520 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 10521 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, 10522 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, 10523 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, 10524 smul=\E[4m, tbc=\E[3g, 10525 10526# Terminfo entry for the AT&T 510 D Personal Terminal 10527# Function keys 9 through 16 are accessed by bringing up the 10528# system blocks. 10529# Function key 9 corresponds to the leftmost touch target on the screen, 10530# function key 16 corresponds to the rightmost. 10531# 10532# There are problems with soft key labeling. These are due to 10533# strangenesses in the native terminal that are impossible to 10534# describe in a terminfo. 10535att510d|bct510d|AT&T 510D Personal Terminal, 10536 am, da, db, mir, msgr, xenl, xon, 10537 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, 10538 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10539 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10540 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, 10541 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 10542 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 10543 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, 10544 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, 10545 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, 10546 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 10547 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 10548 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, 10549 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 10550 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, 10551 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, 10552 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, 10553 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, 10554 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, 10555 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 10556 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 10557 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, 10558 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, 10559 rs2=\E[5;0|, sc=\E7, 10560 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10561 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, 10562 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, 10563 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 10564 10565# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) 10566att500|att513|AT&T 513 using page mode, 10567 am, chts, mir, msgr, xenl, xon, 10568 cols#80, lh#2, lines#24, lw#8, nlab#8, 10569 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10570 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10571 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, 10572 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10573 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10574 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10575 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, 10576 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10577 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 10578 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10579 indn=\E[%p1%dE, invis=\E[8m, 10580 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, 10581 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10582 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10583 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, 10584 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, 10585 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, 10586 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, 10587 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, 10588 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 10589 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, 10590 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 10591 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, 10592 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, 10593 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 10594 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 10595 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, 10596 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, 10597 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, 10598 nel=\EE, 10599 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, 10600 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, 10601 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, 10602 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 10603 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 10604 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, 10605 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, 10606 rmul=\E[m, 10607 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, 10608 rs2=\E[5;0|, sc=\E7, 10609 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10610 sgr0=\E[m\017, smacs=^N, smir=\E[4h, 10611 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, 10612 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 10613 10614# 01-07-88 10615# printer must be set to EMUL ANSI to accept ESC codes 10616# <cuu1> stops at top margin 10617# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font 10618# and alt font ascii,wrap on,tabs cleared 10619# <is2> disables newline on LF,Emphasized off 10620# The <u0> capability sets form length 10621att5310|att5320|AT&T Model 53210 or 5320 matrix printer, 10622 xhpa, xvpa, 10623 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, 10624 orhi#100, orl#12, orvi#72, 10625 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, 10626 cr=^M, 10627 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, 10628 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, 10629 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, 10630 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, 10631 rshm=\E[m, 10632 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, 10633 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, 10634 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, 10635 u0=\E[%p1%dt, vpa=\E[%p1%dd, 10636 10637# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL 10638# The following SET-UP modes are assumed for normal operation: 10639# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL 10640# Other SET-UP modes may be set for operator convenience or communication 10641# requirements. This termcap description is for the Resident Terminal Mode. 10642# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10643# The BRL entry also said: UNSAFE :ll=\E[70H: 10644att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 10645 am, xon, 10646 cols#88, it#8, lines#70, vt#3, 10647 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 10648 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 10649 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 10650 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 10651 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, 10652 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 10653 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, 10654 rs1=\Ec, sc=\E7, 10655 10656# 5620 terminfo (2.0 or later ROMS with char attributes) 10657# The following SET-UP modes are assumed for normal operation: 10658# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR 10659# Other SET-UP modes may be set for operator convenience or communication 10660# requirements. This termcap description is for Resident Terminal Mode. No 10661# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10662# assumptions: <ind> (scroll forward one line) is only done at screen bottom 10663# Be aware that older versions of the dmd have a firmware bug that affects 10664# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. 10665# <msgr> is from an otherwise inferior BRL for this terminal. That entry 10666# also has <ll>=\E[70H commented out and marked unsafe. 10667# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>. 10668att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, 10669 OTbs, am, msgr, npc, xon, 10670 cols#88, it#8, lines#70, 10671 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, 10672 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 10673 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 10674 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, 10675 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 10676 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 10677 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, 10678 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, 10679 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, 10680 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 10681att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, 10682 lines#24, use=att5620, 10683att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, 10684 lines#34, use=att5620, 10685# 5620 layer running the "S" system's downloaded graphics handler: 10686att5620-s|tty5620-s|layer|vitty|5620 S layer, 10687 OTbs, OTpt, am, 10688 cols#80, it#8, lines#72, 10689 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 10690 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 10691 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, 10692 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 10693 kll=\E[70;1H, 10694 10695# Entries for <kf15> thru <kf28> refer to the shifted system pf keys. 10696# 10697# Entries for <kf29> thru <kf46> refer to the alternate keypad mode 10698# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 10699att605|AT&T 605 80 column 102key keyboard, 10700 am, eo, xon, 10701 cols#80, lines#24, lw#8, nlab#8, wsl#80, 10702 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10703 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 10704 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 10705 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 10706 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10707 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 10708 il1=\E[L, ind=^J, invis=\E[8m, 10709 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, 10710 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, 10711 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10712 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, 10713 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, 10714 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, 10715 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, 10716 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, 10717 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, 10718 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, 10719 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, 10720 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, 10721 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, 10722 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, 10723 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10724 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10725 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10726 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 10727 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, 10728 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 10729 tsl=\E7\E[25;%i%p1%dx, 10730att605-pc|ATT 605 in pc term mode, 10731 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 10732 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 10733 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, 10734 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10735 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, 10736 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 10737 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, 10738 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, 10739 xonc=e, use=att605, 10740att605-w|AT&T 605-w 132 column 102 key keyboard, 10741 cols#132, wsl#132, 10742 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, 10743 use=att605, 10744# (att610: I added <rmam>/<smam> based on the init string. I also 10745# added <indn> and <rin> because the BSD file says the att615s have them, 10746# and the 615 is like a 610 with a big keyboard, and most of their other 10747# smart terminals support the same sequence -- esr) 10748att610|AT&T 610; 80 column; 98key keyboard, 10749 am, eslok, hs, mir, msgr, xenl, xon, 10750 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10751 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10752 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10753 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10754 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10755 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10756 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10757 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10758 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10759 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10760 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10761 indn=\E[%p1%dS, invis=\E[8m, 10762 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, 10763 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 10764 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10765 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10766 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 10767 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 10768 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, 10769 nel=\EE, 10770 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10771 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10772 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 10773 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 10774 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10775 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10776 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, 10777att610-w|AT&T 610; 132 column; 98key keyboard, 10778 cols#132, wsl#132, 10779 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10780 use=att610, 10781 10782att610-103k|AT&T 610; 80 column; 103key keyboard, 10783 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10784 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10785 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10786 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10787 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10788 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10789 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10790 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, 10791 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, 10792 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, 10793 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, 10794 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, 10795 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, 10796att610-103k-w|AT&T 610; 132 column; 103key keyboard, 10797 cols#132, wsl#132, 10798 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10799 use=att610-103k, 10800att615|AT&T 615; 80 column; 98key keyboard, 10801 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10802 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10803 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10804 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10805 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10806 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10807 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, 10808att615-w|AT&T 615; 132 column; 98key keyboard, 10809 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10810 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10811 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10812 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10813 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10814 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10815 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, 10816att615-103k|AT&T 615; 80 column; 103key keyboard, 10817 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, 10818att615-103k-w|AT&T 615; 132 column; 103key keyboard, 10819 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, 10820# (att620: I added <rmam>/<smam> based on the init string and 10821# <rin>/<indn> from a BSD termcap -- esr) 10822att620|AT&T 620; 80 column; 98key keyboard, 10823 am, eslok, hs, mir, msgr, xenl, xon, 10824 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10825 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10826 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10827 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10828 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10829 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10830 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10831 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10832 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10833 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10834 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10835 indn=\E[%p1%dS, invis=\E[8m, 10836 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, 10837 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, 10838 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10839 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10840 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10841 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, 10842 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, 10843 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, 10844 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, 10845 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, 10846 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, 10847 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10848 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, 10849 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10850 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10851 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10852 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, 10853 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 10854 rs2=\Ec\E[?3l, sc=\E7, 10855 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10856 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, 10857 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 10858 tsl=\E7\E[25;%i%p1%dx, 10859att620-w|AT&T 620; 132 column; 98key keyboard, 10860 cols#132, wsl#132, 10861 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10862 use=att620, 10863att620-103k|AT&T 620; 80 column; 103key keyboard, 10864 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10865 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10866 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10867 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10868 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10869 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10870 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10871 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, 10872 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, 10873 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, 10874 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, 10875 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, 10876 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 10877 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 10878 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, 10879 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, 10880 10881att620-103k-w|AT&T 620; 132 column; 103key keyboard, 10882 cols#132, wsl#132, 10883 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10884 use=att620-103k, 10885 10886# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal 10887# The following SETUP modes are assumed for normal operation: 10888# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF 10889# Font_Size=Large Non-Layers_Window_Cols=80 10890# Non-Layers_Window_Rows=60 10891# Other SETUP modes may be set for operator convenience or communication 10892# requirements. Some capabilities assume a printer attached to the Aux EIA 10893# port. This termcap description is for the Fixed Non-Layers Window. No 10894# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10895# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) 10896att630|AT&T 630 windowing terminal, 10897 OTbs, am, da, db, mir, msgr, npc, xon, 10898 cols#80, it#8, lines#60, lm#0, 10899 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, 10900 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 10901 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10902 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 10903 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 10904 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 10905 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, 10906 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 10907 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, 10908 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, 10909 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, 10910 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, 10911 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, 10912 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, 10913 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, 10914 rmul=\E[m, rs2=\Ec, sc=\E7, 10915 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, 10916 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 10917att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, 10918 lines#24, use=att630, 10919 10920# This is the att700 entry for 700 native emulation of the AT&T 700 10921# terminal. Comments are relative to changes from the 605V2 entry and 10922# att730 on which the entry is based. Comments show the terminfo 10923# capability name, termcap name, and description. 10924# 10925# Here is what's going onm in the init string: 10926# ESC [ 50;4| set 700 native mode (really is 605) 10927# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) 10928# ESC [ 53;0| set GenFlow to Xon/Xoff 10929# ESC [ 8 ;0| set CR on NL 10930# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) 10931# ESC [ ? 4 l jump scroll 10932# ESC [ ? 5 l/h video: normal (l); reverse (h) 10933# ESC [ ?13 l Labels on 10934# ESC [ ?15 l parity check = no 10935# ESC [ 13 l monitor mode off 10936# ESC [ 20 l LF on NL (not CRLF on NL) 10937# ESC [ ? 7 h autowrap on 10938# ESC [ 12 h local echo off 10939# ESC ( B GO = ASCII 10940# ESC ) 0 G1 = Special Char & Line Drawing 10941# ESC [ ? 31 l Set 7 bit controls 10942# 10943# Note: Most terminals, especially the 600 family use Reverse Video for 10944# standout mode. DEC also uses reverse video. The VT100 uses bold in addition 10945# Assume we should stay with reverse video for 70.. However, the 605V2 exits 10946# standout mode with \E[m (all normal attributes). The 730 entry simply 10947# exits reverse video which would leave other current attributes intact. It 10948# was assumed the 730 entry to be more correct so rmso has changed. The 10949# 605V2 has no sequences to turn individual attributes off, thus its setting 10950# and the rmso/smso settings from the 730. 10951# 10952# Note: For the same reason as above in rmso I changed exit under-score mode 10953# to specifically turn off underscore, rather than return to all normal 10954# attributes 10955# 10956# Note: The following pkey_xmit is taken from the 605V2 which contained the 10957# capability as pfxl. It was changed here to pfx since pfxl 10958# will only compile successfully with Unix 4.0 tic. Also note that pfx only 10959# allows strings to be parameters and label values must be programmed as 10960# constant strings. Supposedly the pfxl of Version 4.0 allows both labels 10961# and strings to be parameters. The 605V2 pfx entry should be examined later 10962# in this regard. For reference the 730 pfxl entry is shown here for comparison 10963# 730 pfx entry: 10964# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s 10965# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 10966# 10967# (for 4.0 tic) 10968# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10969# 10970# (for <4.0 tic) 10971# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10972# 10973# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 10974# 10975# Port1 Interface 10976# 10977# modular 10 pin Connector 10978# Left side Right side 10979# Pin 1 2 3 4 5 6 7 8 9 10 10980# 10981# Key (notch) at bottom 10982# 10983# Pin 1 DSR 10984# 3 DCD 10985# 4 DTR 10986# 5 Sig Ground 10987# 6 RD 10988# 7 SD 10989# 8 CTS 10990# 9 RTS 10991# 10 Frame Ground 10992# 10993# The manual is 189 pages and is loaded with details about the escape codes, 10994# etc..... Available from AT&T CIC 800-432-6600... 10995# ask for Document number 999-300-660.. 10996# 10997att700|AT&T 700 24x80 column display w/102key keyboard, 10998 am, eslok, hs, mir, msgr, xenl, xon, 10999 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 11000 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11001 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11002 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11003 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11004 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11005 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11006 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11007 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11008 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 11009 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 11010 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 11011 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, 11012 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 11013 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11014 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 11015 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 11016 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 11017 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 11018 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 11019 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 11020 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 11021 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 11022 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 11023 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11024 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 11025 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11026 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 11027 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11028 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11029 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, 11030 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, 11031 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11032 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 11033 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 11034 tsl=\E7\E[99;%i%p1%dx, 11035 11036# This entry was modified 3/13/90 by JWE. 11037# fixes include additions of <enacs>, correcting <rep>, and modification 11038# of <kHOM>. (See comments below) 11039# att730 has status line of 80 chars 11040# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, 11041# the <kf25> and up keys are used for shifted system Fkeys 11042# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 11043# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 11044# and 122 key keyboards, the 730's translation is \E[2J. For consistency 11045# <kHOM> has been commented out. The user can uncomment <kHOM> if using the 11046# 102, 102+1, or 122 key keyboards 11047# kHOM=\E[2J, 11048# (att730: I added <rmam>/<smam> based on the init string -- esr) 11049att730|AT&T 730 windowing terminal, 11050 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, 11051 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, 11052 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11053 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11054 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11055 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11056 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11057 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11058 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11059 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11060 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 11061 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 11062 ind=\ED, invis=\E[8m, 11063 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, 11064 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 11065 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11066 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 11067 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, 11068 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, 11069 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, 11070 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, 11071 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, 11072 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, 11073 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, 11074 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, 11075 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11076 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, 11077 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11078 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, 11079 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, 11080 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11081 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11082 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, 11083 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, 11084 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11085 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 11086 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, 11087 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, 11088att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, 11089 lines#41, use=att730, 11090att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, 11091 lines#24, use=att730, 11092att730r|730MTGr|AT&T 730 rev video windowing terminal Version, 11093 flash=\E[?5l$<200>\E[?5h, 11094 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, 11095 use=att730, 11096att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, 11097 lines#41, use=att730r, 11098att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, 11099 lines#24, use=att730r, 11100 11101# The following represents the screen layout along with the associated 11102# bezel buttons for the 5430/pt505 terminal. The "kf" designations do 11103# not appear on the screen but are shown to reference the bezel buttons. 11104# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate 11105# position relative to the screen. 11106# 11107# 11108# 11109# +----------------------------------------------------------------+ 11110# | | 11111# XXXX | kf0 kf24 | XXXX 11112# | | 11113# | | 11114# XXXX | kf1 kf23 | XXXX 11115# | | 11116# | | 11117# XXXX | kf2 kf22 | XXXX 11118# | | 11119# | | 11120# XXXX | kf3 kf21 | XXXX 11121# | | 11122# | | 11123# XXXX | kf4 kf20 | XXXX 11124# | | 11125# | | 11126# XXXX | kf5 kf19 | XXXX 11127# | | 11128# | | 11129# XXXX | kf6 kf18 | XXXX 11130# | | 11131# | | 11132# XXXX | | XXXX 11133# | | 11134# | | 11135# +----------------------------------------------------------------+ 11136# 11137# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX 11138# 11139# Note: XXXX represents the screen buttons 11140# CMD REDRAW 11141# 11142# MAIL 11143# 11144# version 1 note: 11145# The character string sent by key 'kf26' may be user programmable 11146# to send either \E[16s, or \E[26s. 11147# The character string sent by key 'krfr' may be user programmable 11148# to send either \E[17s, or \E[27s. 11149# 11150# Depression of the "CMD" key sends \E! (kcmd) 11151# Depression of the "MAIL" key sends \E[26s (kf26) 11152# "REDRAW" same as "REFRESH" (krfr) 11153# 11154# "kf" functions adds carriage return to output string if terminal is in 11155# 'new line' mode. 11156# 11157# The following are functions not covered in the table above: 11158# 11159# Set keyboard character (SKC): \EPn1;Pn2w 11160# Pn1= 0 Back Space key 11161# Pn1= 1 Break key 11162# Pn2= Program char (hex) 11163# 11164# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t 11165# Pn1= Window number (1-39) 11166# Pn2-Pn5= Y;X;Y;X coordinates 11167# 11168# Screen Selection (SSL): \E[Pnu 11169# Pn= Window number 11170# 11171# Set Terminal Modes (SM): \E[Pnh 11172# Pn= 3 Graphics mode 11173# Pn= > Cursor blink 11174# Pn= < Enter new line mode 11175# Pn= = Enter reverse insert/replace mode 11176# Pn= ? Enter no scroll mode 11177# 11178# Reset Terminal Mode (RM): \E[Pnl 11179# Pn= 3 Exit graphics mode 11180# Pn= > Exit cursor blink 11181# Pn= < Exit new line mode 11182# Pn= = Exit reverse insert/replace mode 11183# Pn= ? Exit no scroll mode 11184# 11185# Screen Status Report (SSR): \E[Pnp 11186# Pn= 0 Request current window number 11187# Pn= 1 Request current window dimensions 11188# 11189# Device Status Report (DSR): \E[6n Request cursor position 11190# 11191# Call Status Report (CSR): \E[Pnv 11192# Pn= 0 Call failed 11193# Pn= 1 Call successful 11194# 11195# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string 11196# Pn1= Button number to be loaded 11197# Pn2= Character count of "string" 11198# Pn3= Key mode being loaded: 11199# 0= Unshifted 11200# 1= Shifted 11201# 2= Control 11202# String= Text string (15 chars max) 11203# 11204# Screen Number Report (SNR): \E[Pnp 11205# Pn= Screen number 11206# 11207# Screen Dimension Report (SDR): \E[Pn1;Pn2r 11208# Pn1= Number of rows available in window 11209# Pn2= Number of columns available in window 11210# 11211# Cursor Position Report (CPR): \E[Pn1;Pn2R 11212# Pn1= "Y" Position of cursor 11213# Pn2= "X" Position of cursor 11214# 11215# Request Answer Back (RAB): \E[c 11216# 11217# Answer Back Response (ABR): \E[?;*;30;VSV 11218# *= 0 No printer available 11219# *= 2 Printer available 11220# V= Software version number 11221# SV= Software sub version number 11222# (printer-available field not documented in v1) 11223# 11224# Screen Alignment Aid: \En 11225# 11226# Bell (lower pitch): \E[x 11227# 11228# Dial Phone Number: \EPdstring\ 11229# string= Phone number to be dialed 11230# 11231# Set Phone Labels: \EPpstring\ 11232# string= Label for phone buttons 11233# 11234# Set Clock: \EPchour;minute;second\ 11235# 11236# Position Clock: \EPsY;X\ 11237# Y= "Y" coordinate 11238# X= "X" coordinate 11239# 11240# Delete Clock: \Epr\ 11241# 11242# Programming The Function Buttons: \EPfPn;string\ 11243# Pn= Button number (00-06, 18-24) 11244# (kf00-kf06, kf18-kf24) 11245# string= Text to sent on button depression 11246# 11247# The following in version 2 only: 11248# 11249# Request For Local Directory Data: \EPp12;\ 11250# 11251# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ 11252# 11253# Request for Local Directory Data in print format: \EPp13;\ 11254# 11255# Enable 'Prt on Line' mode: \022 (DC2) 11256# 11257# Disable 'Prt on Line' mode: \024 (DC4) 11258# 11259 11260# 05-Aug-86: 11261# The following Terminfo entry describes functions which are supported by 11262# the AT&T 5430/pt505 terminal software version 2 and later. 11263att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, 11264 am, xon, 11265 cols#80, it#8, lines#24, 11266 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11267 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, 11268 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 11269 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11270 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11271 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 11272 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, 11273 il=\E[%p1%dL, il1=\E[L, ind=^J, 11274 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l, 11275 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11276 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, 11277 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, 11278 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, 11279 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, 11280 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 11281 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, 11282 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, 11283 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, 11284 11285# The following Terminfo entry describes functions which are supported by 11286# the AT&T 5430/pt505 terminal software version 1. 11287att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, 11288 lines#24, 11289 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, 11290tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, 11291 lines#22, use=att505, 11292# 11293#### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- 11294# This cut mark helps make life less painful for people running ncurses tic 11295# on machines with relatively little RAM. The file can be broken in half here 11296# cleanly and compiled in sections -- no `use' references cross this cut 11297# going forward. 11298# 11299 11300#### Ampex (Dialogue) 11301# 11302# Yes, these are the same people who are better-known for making audio- and 11303# videotape. I'm told they are located in Redwood City, CA. 11304# 11305 11306# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 11307# (ampex80: some capabilities merged in from SCO's entry -- esr) 11308ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, 11309 OTbs, am, bw, ul, 11310 cols#80, it#8, lines#24, 11311 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, 11312 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 11313 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, 11314 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, 11315 smso=\Ej, smul=\El, tbc=\E3, 11316# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: 11317ampex175|ampex d175, 11318 am, 11319 cols#80, lines#24, 11320 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 11321 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 11322 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, 11323 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 11324 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, 11325 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, 11326# No backspace key in the main QWERTY cluster. Fortunately, it has a 11327# NEWLINE/PAGE key just above RETURN that sends a strange single-character 11328# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS 11329# mode), this key can be used as the erase key; I find I like this. Because 11330# some people and some systems may not, there is another termcap ("ampex175") 11331# that suppresses this little eccentricity by omitting the relevant capability. 11332ampex175-b|ampex d175 using left arrow for erase, 11333 kbs=^_, use=ampex175, 11334# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu> 11335# (ampex210: removed obsolete ":kn#10:" -- esr) 11336ampex210|a210|ampex a210, 11337 OTbs, am, hs, xenl, 11338 cols#80, it#8, lines#24, xmc#1, 11339 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, 11340 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 11341 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, 11342 fsl=\E.2, home=^^, ht=^I, ich1=\EQ, 11343 if=/usr/share/tabset/std, il1=\EE, invis@, 11344 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, 11345 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 11346 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 11347 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, 11348 tsl=\E.0\Eg\E}\Ef, use=adm+sgr, 11349# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis> 11350# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>, 11351# and moved the padding to be *after* the caps -- esr) 11352ampex219|ampex-219|amp219|Ampex with Automargins, 11353 hs, xenl, 11354 cols#80, it#8, lines#24, 11355 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, 11356 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, 11357 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 11358 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, 11359 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, 11360 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, 11361 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 11362 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, 11363 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, 11364 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 11365 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, 11366 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, 11367 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, 11368ampex219w|ampex-219w|amp219w|Ampex 132 cols, 11369 cols#132, lines#24, 11370 bel=^G, cr=^M, cud1=^J, ind=^J, 11371 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, 11372# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) 11373ampex232|ampex-232|Ampex Model 232, 11374 am, 11375 cols#80, lines#24, xmc#1, 11376 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, 11377 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 11378 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, 11379 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, 11380 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, 11381 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 11382 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 11383 kf9=^AI\r, khome=^^, use=adm+sgr, 11384# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) 11385ampex232w|Ampex Model 232 / 132 columns, 11386 cols#132, lines#24, 11387 is2=\E\034Eg\El, use=ampex232, 11388 11389#### Ann Arbor (aa) 11390# 11391# Ann Arbor made dream terminals for hackers -- large screen sizes and huge 11392# numbers of function keys. At least some used monitors in portrait mode, 11393# allowing up to 76-character screen heights! They were reachable at: 11394# 11395# Ann Arbor Terminals 11396# 6175 Jackson Road 11397# Ann Arbor, MI 48103 11398# (313)-663-8000 11399# 11400# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor 11401# can't be found on the Web; I fear they're long dead. R.I.P. 11402# 11403 11404 11405# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. 11406# Highly modified 6/22 by Mike O'Brien. 11407# split out into several for the various screen sizes by dave-yost@rand 11408# Modifications made 3/82 by Mark Horton 11409# Modified by Tom Quarles at UCB for greater efficiency and more diversity 11410# status line moved to top of screen, <flash> removed 5/82 11411# Some unknown person at SCO then hacked the init strings to make them more 11412# efficient. 11413# 11414# assumes the following setup: 11415# A menu: 0000 1010 0001 0000 11416# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 11417# C menu: 56 66 0 0 9600 0110 1100 11418# D menu: 0110 1001 1 0 11419# 11420# Briefly, the settings are for the following modes: 11421# (values are for bit set/clear with * indicating our preference 11422# and the value used to test these termcaps) 11423# Note that many of these settings are irrelevent to the terminfo 11424# and are just set to the default mode of the terminal as shipped 11425# by the factory. 11426# 11427# A menu: 0000 1010 0001 0000 11428# Block/underline cursor* 11429# blinking/nonblinking cursor* 11430# key click/no key click* 11431# bell/no bell at column 72* 11432# 11433# key pad is cursor control*/key pad is numeric 11434# return and line feed/return for <cr> key * 11435# repeat after .5 sec*/no repeat 11436# repeat at 25/15 chars per sec. * 11437# 11438# hold data until pause pressed/process data unless pause pressed* 11439# slow scroll/no slow scroll* 11440# Hold in area/don't hold in area* 11441# functions keys have default*/function keys disabled on powerup 11442# 11443# show/don't show position of cursor during page transmit* 11444# unused 11445# unused 11446# unused 11447# 11448# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 11449# Baud rate (9600*) 11450# 11451# 2 bits of parity - 00=odd,01=even*,10=space,11=mark 11452# 1 stop bit*/2 stop bits 11453# parity error detection off*/on 11454# 11455# keyboard local/on line* 11456# half/full duplex* 11457# disable/do not disable keyboard after data transmission* 11458# 11459# transmit entire page/stop transmission at cursor* 11460# transfer/do not transfer protected characters* 11461# transmit all characters/transmit only selected characters* 11462# transmit all selected areas/transmit only 1 selected area* 11463# 11464# transmit/do not transmit line separators to host* 11465# transmit/do not transmit page tab stops tabs to host* 11466# transmit/do not transmit column tab stop tabs to host* 11467# transmit/do not transmit graphics control (underline,inverse..)* 11468# 11469# enable*/disable auto XON/XOFF control 11470# require/do not require receipt of a DC1 from host after each LF* 11471# pause key acts as a meta key/pause key is pause* 11472# unused 11473# 11474# unused 11475# unused 11476# unused 11477# unused 11478# 11479# XON character (17*) 11480# XOFF character (19*) 11481# 11482# C menu: 56 66 0 0 9600 0110 1100 11483# number of lines to print data on (printer) (56*) 11484# 11485# number of lines on a sheet of paper (printer) (66*) 11486# 11487# left margin (printer) (0*) 11488# 11489# number of pad chars on new line to printer (0*) 11490# 11491# printer baud rate (9600*) 11492# 11493# printer parity: 00=odd,01=even*,10=space,11=mark 11494# printer stop bits: 2*/1 11495# print/do not print guarded areas* 11496# 11497# new line is: 01=LF,10=CR,11=CRLF* 11498# unused 11499# unused 11500# 11501# D menu: 0110 1001 1 0 11502# LF is newline/LF is down one line, same column* 11503# wrap to preceding line if move left from col 1*/don't wrap 11504# wrap to next line if move right from col 80*/don't wrap 11505# backspace is/is not destructive* 11506# 11507# display*/ignore DEL character 11508# display will not/will scroll* 11509# page/column tab stops* 11510# erase everything*/erase unprotected only 11511# 11512# editing extent: 0=display,1=line*,2=field,3=area 11513# 11514# unused 11515# 11516 11517annarbor4080|aa4080|ann arbor 4080, 11518 OTbs, am, 11519 cols#80, lines#40, 11520 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, 11521 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, 11522 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, 11523 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, 11524 11525# Strange Ann Arbor terminal from BRL 11526aas1901|Ann Arbor K4080 w/S1901 mod, 11527 am, 11528 cols#80, lines#40, 11529 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, 11530 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, 11531 nel=^M^J, 11532 11533# If you're using the GNU termcap library, add 11534# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: 11535# to these capabilities. This is the nonstandard GNU termcap scrolling 11536# capability, arguments are: 11537# 1. Total number of lines on the screen. 11538# 2. Number of lines above desired scroll region. 11539# 3. Number of lines below (outside of) desired scroll region. 11540# 4. Total number of lines on the screen, the same as the first parameter. 11541# The generic Ann Arbor entry is the only one that uses this. 11542aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), 11543 OTbs, am, km, mc5i, mir, xon, 11544 cols#80, it#8, 11545 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 11546 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, 11547 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 11548 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11549 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 11550 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 11551 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, 11552 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, 11553 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, 11554 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11555 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, 11556 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, 11557 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, 11558 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, 11559 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, 11560 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, 11561 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, 11562 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 11563 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, 11564 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, 11565 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 11566 sgr0=\E[m, 11567 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, 11568 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 11569 vpa=\E[%p1%{1}%+%dd, 11570 11571aaa+rv|ann arbor ambassador in reverse video, 11572 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, 11573 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 11574 rs1=\E[H\E[7m\E[J$<156>, 11575 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 11576 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, 11577# Ambassador with the DEC option, for partial vt100 compatibility. 11578aaa+dec|ann arbor ambassador in dec vt100 mode, 11579 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, 11580 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, 11581 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, 11582 smacs=^O, 11583aaa-18|ann arbor ambassador/18 lines, 11584 lines#18, 11585 is2=\E7\E[60;0;0;18p\E8, 11586 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, 11587 use=aaa+unk, 11588aaa-18-rv|ann arbor ambassador/18 lines+reverse video, 11589 use=aaa+rv, use=aaa-18, 11590aaa-20|ann arbor ambassador/20 lines, 11591 lines#20, 11592 is2=\E7\E[60;0;0;20p\E8, 11593 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, 11594 use=aaa+unk, 11595aaa-22|ann arbor ambassador/22 lines, 11596 lines#22, 11597 is2=\E7\E[60;0;0;22p\E8, 11598 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, 11599 use=aaa+unk, 11600aaa-24|ann arbor ambassador/24 lines, 11601 lines#24, 11602 is2=\E7\E[60;0;0;24p\E8, 11603 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, 11604 use=aaa+unk, 11605aaa-24-rv|ann arbor ambassador/24 lines+reverse video, 11606 use=aaa+rv, use=aaa-24, 11607aaa-26|ann arbor ambassador/26 lines, 11608 lines#26, 11609 is2=\E7\E[60;0;0;26p\E8, 11610 rmcup=\E[60;0;0;26p\E[26;1H\E[K, 11611 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, 11612aaa-28|ann arbor ambassador/28 lines, 11613 lines#28, 11614 is2=\E7\E[60;0;0;28p\E8, 11615 rmcup=\E[60;0;0;28p\E[28;1H\E[K, 11616 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, 11617aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, 11618 eslok, hs, 11619 lines#29, 11620 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, 11621 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, 11622 rmcup=\E[60;1;0;30p\E[29;1H\E[K, 11623 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, 11624 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 11625aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, 11626 use=aaa+rv, use=aaa-30-s, 11627aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, 11628 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 11629 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, 11630aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, 11631 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 11632 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, 11633aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, 11634 lines#30, 11635 is2=\E7\E[60;0;0;30p\E8, 11636 rmcup=\E[60;0;0;30p\E[30;1H\E[K, 11637 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, 11638aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, 11639 use=aaa+rv, use=aaa-30, 11640aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, 11641 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 11642 use=aaa-30, 11643aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, 11644 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 11645 use=aaa+rv, use=aaa-30, 11646aaa-36|ann arbor ambassador/36 lines, 11647 lines#36, 11648 is2=\E7\E[60;0;0;36p\E8, 11649 rmcup=\E[60;0;0;36p\E[36;1H\E[K, 11650 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, 11651aaa-36-rv|ann arbor ambassador/36 lines+reverse video, 11652 use=aaa+rv, use=aaa-36, 11653aaa-40|ann arbor ambassador/40 lines, 11654 lines#40, 11655 is2=\E7\E[60;0;0;40p\E8, 11656 rmcup=\E[60;0;0;40p\E[40;1H\E[K, 11657 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, 11658aaa-40-rv|ann arbor ambassador/40 lines+reverse video, 11659 use=aaa+rv, use=aaa-40, 11660aaa-48|ann arbor ambassador/48 lines, 11661 lines#48, 11662 is2=\E7\E[60;0;0;48p\E8, 11663 rmcup=\E[60;0;0;48p\E[48;1H\E[K, 11664 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, 11665aaa-48-rv|ann arbor ambassador/48 lines+reverse video, 11666 use=aaa+rv, use=aaa-48, 11667aaa-60-s|ann arbor ambassador/59 lines+status, 11668 eslok, hs, 11669 lines#59, 11670 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, 11671 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, 11672 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 11673aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, 11674 use=aaa+rv, use=aaa-60-s, 11675aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, 11676 use=aaa+dec, use=aaa+rv, use=aaa-60-s, 11677aaa-60|ann arbor ambassador/60 lines, 11678 lines#60, 11679 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, 11680 use=aaa+unk, 11681aaa-60-rv|ann arbor ambassador/60 lines+reverse video, 11682 use=aaa+rv, use=aaa-60, 11683aaa-db|ann arbor ambassador 30/destructive backspace, 11684 OTbs@, 11685 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, 11686 11687guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, 11688 lines#33, 11689 flash=\E[>59h$<100>\E[>59l, 11690 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, 11691 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, 11692guru+rv|guru changes for reverse video, 11693 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, 11694guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, 11695 use=guru+rv, use=guru-33, 11696guru+s|guru status line, 11697 eslok, hs, 11698 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, 11699 rmcup=\E[255;1p\E[255;1H\E[K, smcup=, 11700 tsl=\E[>51h\E[1;%p1%dH\E[2K, 11701guru-nctxt|guru with no saved context, 11702 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, 11703guru-s|guru-33-s|ann arbor guru/33 lines+status, 11704 lines#32, 11705 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, 11706 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 11707guru-24|ann arbor guru 24 lines, 11708 cols#80, lines#24, 11709 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, 11710 use=guru+unk, 11711guru-44|ann arbor guru 44 lines, 11712 cols#97, lines#44, 11713 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, 11714 use=guru+unk, 11715guru-44-s|ann arbor guru/44 lines+status, 11716 lines#43, 11717 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, 11718 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 11719guru-76|guru with 76 lines by 89 cols, 11720 cols#89, lines#76, 11721 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, 11722 use=guru+unk, 11723guru-76-s|ann arbor guru/76 lines+status, 11724 cols#89, lines#75, 11725 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, 11726 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 11727guru-76-lp|guru-lp|guru with page bigger than line printer, 11728 cols#134, lines#76, 11729 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, 11730 use=guru+unk, 11731guru-76-w|guru 76 lines by 178 cols, 11732 cols#178, lines#76, 11733 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, 11734 use=guru+unk, 11735guru-76-w-s|ann arbor guru/76 lines+status+wide, 11736 cols#178, lines#75, 11737 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, 11738 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 11739guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, 11740 cols#178, lines#76, 11741 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, 11742 use=guru+unk, 11743aaa-rv-unk|ann arbor unknown type, 11744 lh#0, lw#0, nlab#0, 11745 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, 11746 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 11747 rs1=\E[H\E[7m\E[J, 11748 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 11749 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, 11750 11751#### Applied Digital Data Systems (adds) 11752# 11753# ADDS itself is long gone. ADDS was bought by NCR, and the same group made 11754# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for 11755# terminals was merged again. Then AT&T sold the terminal business to 11756# SunRiver, which later changed its name to Boundless Technologies. The 11757# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there 11758# as of early 1995) are at: 11759# 11760# Boundless Technologies 11761# 100 Marcus Boulevard 11762# Hauppauge, NY 11788-3762 11763# Vox: (800)-231-5445 11764# Fax: (516)-342-7378 11765# Web: http://boundless.com 11766# 11767# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". 11768# In 1995 Boundless acquired DEC's terminals business. 11769# 11770 11771# Regent: lowest common denominator, works on all regents. 11772# (regent: renamed ":bc:" to ":le:" -- esr) 11773regent|Adds Regent Series, 11774 OTbs, am, 11775 cols#80, lines#24, 11776 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, 11777 home=\EY\s\s, ind=^J, ll=^A, 11778# Regent 100 has a bug where if computer sends escape when user is holding 11779# down shift key it gets confused, so we avoid escape. 11780regent100|Adds Regent 100, 11781 xmc#1, 11782 bel=^G, 11783 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 11784 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, 11785 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, 11786 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, 11787 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, 11788regent20|Adds Regent 20, 11789 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, 11790 use=regent, 11791regent25|Adds Regent 25, 11792 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, 11793 use=regent20, 11794regent40|Adds Regent 40, 11795 xmc#1, 11796 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, 11797 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 11798 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, 11799 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, 11800 smul=\E0`, use=regent25, 11801regent40+|Adds Regent 40+, 11802 is2=\EB, use=regent40, 11803regent60|regent200|Adds Regent 60, 11804 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, 11805 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, 11806 use=regent40+, 11807# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 11808# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr) 11809viewpoint|addsviewpoint|adds viewpoint, 11810 OTbs, am, 11811 cols#80, lines#24, 11812 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, 11813 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 11814 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, 11815 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 11816 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, 11817 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, 11818# Some viewpoints have bad ROMs that foo up on ^O 11819screwpoint|adds viewpoint with ^O bug, 11820 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, 11821 11822# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 11823# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs. 11824# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, 11825# underline=01100000, rev=01010000, blink=01000010,dim=01000001, 11826# invis=01000100 and %c is the logical or of desired attributes. 11827# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. 11828# 11829# Update by TD - 2004: 11830# Adapted from 11831# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt 11832# 11833# COMMANDS ASCII CODE 11834# 11835# Address, Absolute ESC,=,row,column 11836# Beep BEL 11837# Aux Port Enable ESC,@ 11838# Aux Port Disable ESC,A 11839# Backspace BS 11840# Cursor back BS 11841# Cursor down LF 11842# Cursor forward FF 11843# Cursor home RS 11844# Cursor up VT 11845# Cursor supress ETB 11846# Cursor enable CAN 11847# Erase to end of line ESC,T 11848# Erase to end of page ESC,Y 11849# Erase screen SUB 11850# Keyboard lock SI 11851# Keyboard unlock SO 11852# Read current cursor position ESC,? 11853# Set Attribute ESC,0,x (see below for values of x) 11854# Tag bit reset ESC,( 11855# Tag bit set ESC,) 11856# Transparent Print on ESC,3 11857# Transparent Print off ESC,4 11858# 11859# 11860# ATTRIBUTES 11861# 11862# Normal @ 0100 11863# Half Intensity A 0101 11864# Blinking B 0102 11865# Half Intensity Blinking C 0103 11866# Reverse Video P 0120 11867# Reverse Video Half Intensity Q 0121 11868# Reverse Video Blinking R 0122 11869# Reverse Video Half Intensity 11870# Blinking S 0123 11871# Underlined ` 0140 11872# Underlined Half Intensity a 0141 11873# Underlined Blinking b 0142 11874# Underlined Half Intensity 11875# Blinking c 0143 11876# Video suppress D 0104 11877vp3a+|viewpoint3a+|adds viewpoint 3a+, 11878 am, bw, 11879 cols#80, it#8, lines#24, 11880 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, 11881 cub1=^H, cud1=^J, cuf1=^L, 11882 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), 11883 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E), 11884 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 11885 nel=^M^J, rev=\E0P\E), rmso=\E(, 11886 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, 11887 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), 11888vp60|viewpoint60|addsvp60|adds viewpoint60, 11889 use=regent40, 11890# 11891# adds viewpoint 90 - from cornell 11892# Note: emacs sends ei occasionally to insure the terminal is out of 11893# insert mode. This unfortunately puts the viewpoint90 IN insert 11894# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also, 11895# - :ei=:im=: must be present in the termcap translation.) 11896# - <xhp> indicates glitch that attributes stick to location 11897# - <msgr> means it's safe to move in standout mode 11898# - <clear=\EG\Ek>: clears screen and visual attributes without affecting 11899# the status line 11900# Function key and label capabilities merged in from SCO. 11901vp90|viewpoint90|adds viewpoint 90, 11902 OTbs, bw, msgr, xhp, 11903 cols#80, lines#24, 11904 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, 11905 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, 11906 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, 11907 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, 11908 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, 11909 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 11910 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, 11911 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, 11912 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, 11913 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, 11914# Note: if return acts weird on a980, check internal switch #2 11915# on the top chip on the CONTROL pc board. 11916adds980|a980|adds consul 980, 11917 OTbs, am, 11918 cols#80, lines#24, 11919 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, 11920 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, 11921 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, 11922 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, 11923 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, 11924 11925#### C. Itoh Electronics 11926# 11927# As of 1995 these people no longer make terminals (they're still in the 11928# printer business). Their terminals were all clones of the DEC VT series. 11929# They're located in Orange County, CA. 11930# 11931 11932# CIT 80 - vt-52 emulator, the termcap has been modified to remove 11933# the delay times and do an auto tab set rather than the indirect 11934# file used in vt100. 11935cit80|cit-80|citoh 80, 11936 OTbs, am, 11937 cols#80, lines#24, 11938 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 11939 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, 11940 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 11941 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, 11942# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 11943# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr) 11944cit101|citc|C.itoh fast vt100, 11945 OTbs, am, xenl, 11946 cols#80, lines#24, 11947 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B, 11948 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 11949 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 11950 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, 11951 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, 11952 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 11953 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 11954 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 11955 smul=\E[4m, 11956# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL 11957# The following termcap entry was created from the Callan cd100 entry. The 11958# last two lines (with the capabilities in caps) are used by RM-cobol to allow 11959# full selection of combinations of reverse video, underline, and blink. 11960# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ 11961# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ 11962# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) 11963cit101e|C. Itoh CIT-101e, 11964 OTbs, OTpt, am, mir, msgr, 11965 cols#80, it#8, lines#24, 11966 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, 11967 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 11968 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, 11969 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, 11970 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, 11971 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, 11972 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, 11973 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, 11974 smkx=\E=, smso=\E[7m, smul=\E[4m, 11975# From: David S. Lawyer, June 1997: 11976# The CIT 101-e was made in Japan in 1983-4 and imported by CIE 11977# Terminals in Irvine, CA. It was part of CITOH Electronics. In the 11978# late 1980's CIT Terminals went out of business. 11979# There is no need to use the initialization string is=... (by invoking 11980# tset or setterm etc.) provided that the terminal has been manually set 11981# up (and the setup saved with ^S) to be compatible with this termcap. To be 11982# compatible it should be in ANSI mode (not VT52). A set-up that 11983# works is to set all the manually setable stuff to factory defaults 11984# by pressing ^D in set-up mode. Then increse the brighness with the 11985# up-arrow key since the factory default will likely be dim on an old 11986# terminal. Then change any options you want (provided that they are 11987# compatible with the termcap). For my terminal I set: Screen 11988# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: 11989# on. I also set up mine for parity (but you may not need it). Then 11990# save the setup with ^S. 11991# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr) 11992cit101e-rv|Citoh CIT-101e (sets reverse video), 11993 am, eo, mir, msgr, xenl, xon, 11994 cols#80, it#8, lines#24, 11995 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 11996 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, 11997 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11998 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11999 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12000 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 12001 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, 12002 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 12003 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 12004 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, 12005 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12006 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, 12007 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, 12008 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, 12009 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, 12010 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, 12011 u7=\E[6n, u8=\E[?6c, u9=\E[c, 12012cit101e-n|CIT-101e w/o am, 12013 am@, 12014 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 12015 use=cit101e, 12016cit101e-132|CIT-101e with 132 cols, 12017 cols#132, 12018 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 12019cit101e-n132|CIT-101e with 132 cols w/o am, 12020 am@, 12021 cols#132, 12022 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 12023 use=cit101e, 12024# CIE Terminals CIT-500 from BRL 12025# The following SET-UP modes are assumed for normal operation: 12026# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF 12027# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES 12028# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF 12029# Other SET-UP modes may be set for operator convenience or communication 12030# requirements. 12031# Hardware tabs are assumed to be set every 8 columns; they can be set up 12032# by the "reset", "tset", or "tabs" utilities. No delays are specified; use 12033# "stty ixon -ixany" to enable DC3/DC1 flow control! 12034# (cit500: I added <rmam>/<smam> based on the init string -- esr) 12035cit500|CIE Terminals CIT-500, 12036 OTbs, OTpt, mir, msgr, xon, 12037 OTkn#10, cols#80, it#8, lines#64, vt#3, 12038 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12039 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 12040 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 12041 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 12042 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 12043 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 12044 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, 12045 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, 12046 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 12047 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, 12048 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, 12049 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, 12050 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, 12051 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 12052 rmso=\E[m, rmul=\E[m, 12053 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, 12054 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 12055 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 12056 12057# C. Itoh printers begin here 12058citoh|ci8510|8510|c.itoh 8510a, 12059 cols#80, it#8, 12060 bold=\E!, cub1@, 12061 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., 12062 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, 12063 smul=\EX, use=lpr, 12064citoh-pica|citoh in pica, 12065 is1=\EN, use=citoh, 12066citoh-elite|citoh in elite, 12067 cols#96, 12068 is1=\EE, 12069 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., 12070 use=citoh, 12071citoh-comp|citoh in compressed, 12072 cols#136, 12073 is1=\EQ, 12074 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., 12075 use=citoh, 12076# citoh has infinite cols because we don't want lp ever inserting \n\t**. 12077citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, 12078 cols#32767, 12079 is1=\EP, use=citoh, 12080citoh-6lpi|citoh in 6 lines per inch mode, 12081 is3=\EA, use=citoh, 12082citoh-8lpi|citoh in 8 lines per inch mode, 12083 lines#88, 12084 is3=\EB, use=citoh, 12085 12086#### Control Data (cdc) 12087# 12088 12089cdc456|cdc 456 terminal, 12090 OTbs, am, 12091 cols#80, lines#24, 12092 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 12093 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, 12094 el=^V, home=^Y, il1=\EL, ind=^J, 12095 12096# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) 12097cdc721|CDC Viking, 12098 OTbs, am, 12099 cols#80, lines#24, 12100 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 12101 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 12102 kcuu1=^W, khome=^Y, 12103cdc721ll|CDC Vikingll, 12104 OTbs, am, 12105 cols#132, lines#24, 12106 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 12107 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 12108 kcuu1=^W, khome=^Y, 12109# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out 12110cdc752|CDC 752, 12111 OTbs, am, bw, xhp, 12112 cols#80, lines#24, 12113 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 12114 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, 12115 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, 12116# CDC 756 12117# The following switch/key settings are assumed for normal operation: 12118# 96 chars SCROLL FULL duplex not BLOCK 12119# Other switches may be set according to communication requirements. 12120# Insert/delete-character cannot be used, as the whole display is affected. 12121# "so" & "se" are commented out until jove handles "sg" correctly. 12122cdc756|CDC 756, 12123 OTbs, am, bw, 12124 OTkn#10, cols#80, lines#24, 12125 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 12126 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, 12127 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, 12128 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, 12129 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, 12130 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, 12131 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, 12132 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, 12133 rs1=\031\030\002\003\017, 12134# 12135# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. 12136# 12137# Part of the long initialization string defines the "DOWN" key to the left 12138# of the tab key to send an ESC. The real ESC key is positioned way out 12139# in right field. 12140# 12141# The termcap won't work in 132 column mode due to the way it it moves the 12142# cursor. Termcap doesn't have the capability (as far as I could tell) to 12143# handle the 721 in 132 column mode. 12144# 12145# (cdc721: changed :ri: to :sr: -- esr) 12146cdc721-esc|Control Data 721, 12147 OTbs, OTpt, am, bw, msgr, xon, 12148 OTkn#10, cols#80, it#8, lines#30, 12149 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, 12150 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, 12151 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, 12152 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, 12153 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, 12154 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, 12155 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, 12156 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, 12157 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], 12158 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, 12159 smso=^^D, smul=^\, tbc=^^^RY, 12160 12161#### Getronics 12162# 12163# Getronics is a Dutch electronics company that at one time was called 12164# `Geveke' and made async terminals; but (according to the company itself!) 12165# they've lost all their documentation on the command set. The hardware 12166# documentation suggests the terminals were actually manufactured by a 12167# Taiwanese electronics company named Cal-Comp. There are known 12168# to have been at least two models, the 33 and the 50. 12169# 12170 12171# The 50 seems to be a top end vt220 clone, with the addition of a higher 12172# screen resolution, a larger screen, at least 1 page of memory above and 12173# below the screen, apparently pages of memory right and left of the screen 12174# which can be panned, and about 75 function keys (15 function keys x normal, 12175# shift, control, func A, func B). It also has more setup possibilities than 12176# the vt220. The monitor case is dated November 1978 and the keyboard case is 12177# May 1982. 12178# 12179# The vt100 emulation works as is. The entry below describes the rather 12180# non-conformant (but more featureful) ANSI mode. 12181# 12182# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995 12183visa50|geveke visa 50 terminal in ansi 80 character mode, 12184 bw, mir, msgr, 12185 cols#80, lines#25, 12186 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, 12187 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, 12188 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 12189 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 12190 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12191 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, 12192 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, 12193 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 12194 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, 12195 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, 12196 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, 12197 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 12198 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, 12199 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, 12200 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, 12201 lf3=A insert line, lf4=A delete line, lf5=A clear, 12202 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, 12203 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, 12204 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, 12205 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, 12206 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 12207 vpa=\E[%i%p1%dd, 12208 12209#### Human Designed Systems (Concept) 12210# 12211# Human Designed Systems 12212# 400 Fehley Drive 12213# King of Prussia, PA 19406 12214# Vox: (610)-277-8300 12215# Fax: (610)-275-5739 12216# Net: support@hds.com 12217# 12218# John Martin <john@hds.com> is their termcap expert. They're mostly out of 12219# the character-terminal business now (1995) and making X terminals. In 12220# particular, the whole `Concept' line described here was discontinued long 12221# ago. 12222# 12223 12224# From: <vax135!hpk> Sat Jun 27 07:41:20 1981 12225# Extensive changes to c108 by arpavax:eric Feb 1982 12226# Some unknown person at SCO then translated it to terminfo. 12227# 12228# There seem to be a number of different versions of the C108 PROMS 12229# (with bug fixes in its Z-80 program). 12230# 12231# The first one that we had would lock out the keyboard of you 12232# sent lots of short lines (like /usr/dict/words) at 9600 baud. 12233# Try that on your C108 and see if it sends a ^S when you type it. 12234# If so, you have an old version of the PROMs. 12235# 12236# You should configure the C108 to send ^S/^Q before running this. 12237# It is much faster (at 9600 baud) than the c100 because the delays 12238# are not fixed. 12239# new status line display entries for c108-8p: 12240# <is3> - init str #3 - setup term for status display - 12241# set programmer mode, select window 2, define window at last 12242# line of memory, set bkgnd stat mesg there, select window 0. 12243# 12244# <tsl> - to status line - select window 2, home cursor, erase to 12245# end-of-window, 1/2 bright on, goto(line#0, col#?) 12246# 12247# <fsl> - from status line - 1/2 bright off, select window 0 12248# 12249# <dsl> - disable status display - set bkgnd status mesg with 12250# illegal window # 12251# 12252# There are probably more function keys that should be added but 12253# I don't know what they are. 12254# 12255# No delays needed on c108 because of ^S/^Q handshaking 12256# 12257c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, 12258 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, 12259 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, 12260c108-4p|concept108-4p|concept 108 w/4 pages, 12261 OTbs, eslok, hs, xon, 12262 pb@, 12263 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, 12264 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, 12265 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, 12266 ind=^J, is1=\EK\E!\E F, 12267 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, 12268 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, 12269 smcup=\EU\Ev 8p\Ep\r\E\025, 12270 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, 12271c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, 12272 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, 12273 use=c108-rv-4p, 12274c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, 12275 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, 12276 use=c108-4p, 12277c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, 12278 cols#132, 12279 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, 12280 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, 12281 12282# Concept 100: 12283# These have only window relative cursor addressing, not screen 12284# relative. To get it to work right here, smcup/rmcup (which 12285# were invented for the concept) lock you into a one page 12286# window for screen style programs. 12287# 12288# To get out of the one page window, we use a clever trick: 12289# we set the window size to zero ("\Ev " in rmcup) which the 12290# terminal recognizes as an error and resets the window to all 12291# of memory. 12292# 12293# This trick works on c100 but does not on c108, sigh. 12294# 12295# Some tty drivers use cr3 for concept, others use nl3, hence 12296# the delays on cr and ind below. This padding is only needed at 12297# 9600 baud and up. One or the other is commented out depending on 12298# local conventions. 12299# 12300# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe 12301# less than 6 but more than 2 will work. 12302# 12303# Note: can't use function keys f7-f10 because they are 12304# indistinguishable from arrow keys (!), also, del char and 12305# clear eol use xon/xoff so they probably won't work very well. 12306# 12307# Also note that we don't define insrt/del char/delline/eop/send 12308# because they don't transmit unless we reset them - I figured 12309# it was a bad idea to clobber their definitions. 12310# 12311# The <mc5> sequence changes the escape character to ^^ so that 12312# escapes will be passed through to the printer. Only trouble 12313# is that ^^ won't be - ^^ was chosen to be unlikely. 12314# Unfortunately, if you're sending raster bits through to be 12315# plotted, any character you choose will be likely, so we lose. 12316# 12317# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) 12318# cannot be # in is2 because it will hang a c100 with no printer 12319# if sent twice. 12320c100|concept100|concept|c104|c100-4p|hds concept 100, 12321 OTbs, am, eo, mir, ul, xenl, 12322 cols#80, lines#24, pb#9600, vt#8, 12323 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, 12324 cub1=^H, cud1=^J, cuf1=\E=, 12325 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, 12326 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, 12327 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, 12328 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, 12329 is1=\EK, 12330 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, 12331 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, 12332 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, 12333 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, 12334 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, 12335 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., 12336 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, 12337 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, 12338 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, 12339 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, 12340 rmso=\Ed, rmul=\Eg, sgr0=\EN@, 12341 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, 12342 smso=\ED, smul=\EG, 12343c100-rv|c100-rv-4p|concept100-rv|c100 rev video, 12344 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, 12345 smso=\EE, use=c100, 12346oc100|oconcept|c100-1p|old 1 page concept 100, 12347 in, 12348 is3@, use=c100, 12349 12350# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996. 12351# Lots of notes, originally inline, but ncurses doesn't grok that. 12352# 12353# am: not available in power on mode, but turned on with \E[=107;207h in 12354# is2=. Also, \E=124l in is2= could have been used to prevent needing 12355# to specify xenl:, but that would have rendered the last space on the 12356# last line useless. 12357# bw: Not available in power on mode, but turned on with \E[=107;207h in 12358# is2=. 12359# clear: Could be done with \E[2J alone, except that vi (and probably most 12360# other programs) assume that this also homes the cursor. 12361# dsl: Go to window 2, go to the beginning of the line, use a line feed to 12362# scroll the window, and go back to window 1. 12363# is2: the string may cause a warning to be issued by tic that it 12364# found a very long line and that it suspects that a comma is missing 12365# somewhere. This warning can be ignored (unless it comes up more than 12366# once). The initialization string contains the following commands: 12367# 12368# [Setup mode items changed from factory defaults:] 12369# \E)0 set alternate character set to 12370# graphics 12371# ^O set character set to default 12372# [In case it wasn't] 12373# \E[m turn off all attributes 12374# [In case they weren't off] 12375# \E[=107; cursor wrap and 12376# 207h character wrap on 12377# \E[90;3u set Fkey definitions to "transmit" 12378# defaults 12379# \E[92;3u set cursor key definitions to 12380# "transmit" defaults 12381# \E[43;1u set shift F13 to transmit... 12382# \177\E$P\177 12383# \E[44;1u set shift F14 to transmit... 12384# \177\E$Q\177 12385# \E[45;1u set shift F15 to transmit... 12386# \177\E$R\177 12387# \E[46;1u set shift F16 to transmit... 12388# \177\E$S\177 12389# \E[200;1u set shift up to transmit... 12390# \177\E$A\177 12391# \E[201;1u set shift down to transmit... 12392# \177\E$B\177 12393# \E[202;1u set shift right to transmit... 12394# \177\E$C\177 12395# \E[203;1u set shift left to transmit... 12396# \177\E$D\177 12397# \E[204;1u set shift home to transmit... 12398# \177\E$H\177 12399# \E[212;1u set backtab to transmit... 12400# \177\E$I\177 12401# \E[213;1u set shift backspace to transmit... 12402# \177\E$^H\177 12403# \E[214;1u set shift del to transmit... 12404# "\E$\177" 12405# [Necessary items not mentioned in setup mode:] 12406# \E[2!w move to window 2 12407# \E[25;25w define window as line 25 of memory 12408# \E[!w move to window 1 12409# \E[2*w show current line of window 2 as 12410# status line 12411# \E[2+x set meta key to use high bit 12412# \E[;3+} move underline to bottom of character 12413# 12414# All Fkeys are set to their default transmit definitions with \E[90;3u 12415# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty 12416# setting MUST be redefined or deactivated, because the default is 12417# contained in almost all of this terminal's Fkey strings! If for some 12418# reason "quit" cannot be altered, the Fkeys can, but it would be 12419# necessary to change ^| to ^] in all of these definitions, and add 12420# \E[2;029!t to is2. 12421# lines: is set to 24 because this terminal refuses to treat the 25th 12422# line normally. 12423# ll: Not available in power on mode, but turned on with \E[=107;207h in 12424# is2=. 12425# lm: Pointless, given that this definition locks a single screen of 12426# memory into view, but what the hey... 12427# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any 12428# other attributes alone), but some programs expect this to turn off 12429# everything. 12430# rmul: Could use \E[4!{ to turn off only underline (leaving any other 12431# attributes alone), but some programs expect this to turn off 12432# everything. 12433# sgr: Attributes are set on this terminal with the string \E[ followed by 12434# a list of attribute code numbers (in decimal, separated by 12435# semicolons), followed by the character m. The attribute code 12436# numbers are: 12437# 1 for bold; 12438# 2 for dim (which is ignored in power on mode); 12439# 4 for underline; 12440# 5 for blinking; 12441# 7 for inverse; 12442# 8 for not displayable; and 12443# =99 for protected (except that there are strange side 12444# effects to protected characters which make them inadvisable). 12445# The mapping of terminfo parameters to attributes is as follows: 12446# %p1 (standout) = bold and inverse together; 12447# %p2 (underline) = underline; 12448# %p3 (reverse) = inverse; 12449# %p4 (blink) = blinking; 12450# %p5 (dim) is ignored; 12451# %p6 (bold) = bold; 12452# %p7 (invisible) = not displayable; 12453# %p8 (protected) is ignored; and 12454# %p9 (alt char set) = alt char set. 12455# The code to do this is: 12456# \E[0 OUTPUT \E[0 12457# %?%p1%p6%O IF (standout; bold) OR 12458# %t;1 THEN OUTPUT ;1 12459# %; ENDIF 12460# %?%p2 IF underline 12461# %t;4 THEN OUTPUT ;4 12462# %; ENDIF 12463# %?%p4 IF blink 12464# %t;5 THEN OUTPUT ;5 12465# %; ENDIF 12466# %?%p1%p3%O IF (standout; reverse) OR 12467# %t;7 THEN OUTPUT ;7 12468# %; ENDIF 12469# %?%p7 IF invisible 12470# %t;8 THEN OUTPUT ;8 12471# %; ENDIF 12472# m OUTPUT m 12473# %?%p9 IF altcharset 12474# %t^N THEN OUTPUT ^N 12475# %e^O ELSE OUTPUT ^O 12476# %; ENDIF 12477# sgr0: Everything is turned off (including alternate character set), since 12478# there is no way of knowing what it is that the program wants turned 12479# off. 12480# smul: The "underline" attribute is reconfigurable to an overline or 12481# strikethru, or (as done with \E[;3+} in is2=), to a line at the true 12482# bottom of the character cell. This was done to allow for more readable 12483# underlined characters, and to be able to distinguish between an 12484# underlined space, an underscore, and an underlined underscore. 12485# xenl: Terminal can be configured to not need this, but this "glitch" 12486# behavior is actually preferable with autowrap terminals. 12487# 12488# Parameters kf31= thru kf53= actually contain the strings sent by the shifted 12489# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 12490# string modifies the 'O' in kf43 to kf46 to a '$'. 12491# 12492# kcbt was originally ^I but redefined in is2=. 12493# kHOM was \E[H originally but redefined in is2=, as were a number of 12494# other keys. 12495# kDC was originally \177 but redefined in is2=. 12496# 12497# kbs: Shift was also ^H originally but redefined as \E$^H in is2=. 12498# tsl: Go to window 2, then do an hpa=. 12499# 12500#------- flash=\E[8;3!}^G\E[3;3!} 12501#------- flash=\E[?5h$<100>\E[?5l 12502# There are two ways to flash the screen, both of which have their drawbacks. 12503# The first is to set the bell mode to video, transmit a bell character, and 12504# set the bell mode back - but to what? There is no way of knowing what the 12505# user's old bell setting was before we messed with it. Worse, the command to 12506# set the bell mode also sets the key click volume, and there is no way to say 12507# "leave that alone", or to know what it's set to, either. 12508# The second way to do a flash is to set the screen to inverse video, pad for a 12509# tenth of a second, and set it back - but like before, there's no way to know 12510# that the screen wasn't ALREADY in inverse video, or that the user may prefer 12511# it that way. The point is moot anyway, since vi (and probably other 12512# programs) assume that by defining flash=, you want the computer to use it 12513# INSTEAD of bel=, rather than as a secondary type of signal. 12514# 12515#------- cvvis=\E[+{ 12516# The is the power on setting, which is also as visible as the cursor 12517# gets. 12518#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw 12519# Windowing is possible, but not defined here because it is also used to 12520# emulate status line functions. Allowing a program to set a window could 12521# clobber the status line or render it unusable. There is additional memory, 12522# but screen scroll functions are destructive and do not make use of it. 12523# 12524#------- dim= Not available in power on mode. 12525# You have a choice of defining low intensity characters as "half bright" and 12526# high intensity as "normal", or defining low as "normal" and high as "bold". 12527# No matter which you choose, only one of either "half bright" or "bold" is 12528# available at any time, so taking the time to override the default is 12529# pointless. 12530# 12531#------- prot=\E[=0;99m 12532# Not defined, because it appears to have some strange side effects. 12533#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 12534#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 12535#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; 12536# Available, but making them available to programs is inadvisable. 12537# The code to do this is: 12538# %?%p1%{24}%< IF ((key; 24) <; 12539# %p1%{30}%> ((key; 30) >; 12540# %p1%{54}%< (key; 54) < 12541# %A ) AND 12542# %O ) OR 12543# [that is, "IF key < 24 OR (key > 30 AND key < 54)",] 12544# %t\E[ THEN OUTPUT \E[ 12545# %p1%d OUTPUT (key) as decimal 12546# [next line applies to pfx only] 12547# ;1 OUTPUT ;1 12548# u OUTPUT u 12549# \177 OUTPUT \177 12550# %p2%s OUTPUT (string) as string 12551# \177 OUTPUT \177 12552# [DEL chosen as delimiter, but could be any character] 12553# [implied: ELSE do nothing] 12554# %; ENDIF 12555# 12556#------- rs2= 12557# Not defined since anything it might do could be done faster and easier with 12558# either Meta-Shift-Reset or the main power switch. 12559# 12560#------- smkx=\E[1!z 12561#------- rmkx=\E[!z 12562# These sequences apply to the cursor and setup keys only, not to the 12563# numeric keypad. But it doesn't matter anyway, since making these 12564# available to programs is inadvisable. 12565# For the key definitions below, all sequences beginning with \E$ are 12566# custom and programmed into the terminal via is2. \E$ also has no 12567# meaning to any other terminal. 12568# 12569#------- cmdch=\E[;%p1%d!t 12570# Available, but making it available to programs is inadvisable. 12571#------- smxon=\E[1*q 12572# Available, but making it available to programs is inadvisable. 12573# Terminal will send XON/XOFF on buffer overflow. 12574#------- rmxon=\E[*q 12575# Available, but making it available to programs is inadvisable. 12576# Terminal will not notify on buffer overflow. 12577#------- smm=\E[2+x 12578#------- rmm=\E[+x 12579# Available, but making them available to programs is inadvisable. 12580# 12581# Printing: 12582# It's not made clear in the manuals, but based on other ansi/vt type 12583# terminals, it's a good guess that this terminal is capable of both 12584# "transparent print" (which doesn't copy data to the screen, and 12585# therefore needs mc5i: specified to say so) and "auxilliary print" 12586# (which does duplicate printed data on the screen, in which case mc4= 12587# and mc5= should use the \E[?4i and \E[?5i strings instead). 12588 12589hds200|Human Designed Systems HDS200, 12590 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 12591 cols#80, it#8, lines#24, lm#0, 12592 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 12593 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, 12594 clear=\E[H\E[J, cnorm=\E[+{, cr=^M, 12595 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 12596 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 12597 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12598 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 12599 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, 12600 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 12601 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 12602 invis=\E[0;8m, 12603 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, 12604 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, 12605 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12606 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, 12607 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, 12608 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, 12609 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, 12610 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, 12611 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, 12612 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, 12613 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, 12614 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, 12615 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, 12616 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, 12617 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, 12618 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, 12619 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, 12620 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, 12621 rmul=\E[m\017, sc=\E7, 12622 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 12623 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, 12624 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, 12625 vpa=\E[%i%p1%dd, 12626 12627# <ht> through <el> included to specify padding needed in raw mode. 12628# (avt-ns: added empty <acsc> to suppress a tic warning --esr) 12629avt-ns|concept avt no status line, 12630 OTbs, am, eo, mir, ul, xenl, xon, 12631 cols#80, it#8, lines#24, lm#192, 12632 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12633 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, 12634 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 12635 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 12636 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12637 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, 12638 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, 12639 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, 12640 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, 12641 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, 12642 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, 12643 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12644 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 12645 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, 12646 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 12647 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, 12648 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 12649 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, 12650 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, 12651 sc=\E7, 12652 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 12653 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r, 12654 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, 12655 tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 12656avt-rv-ns|concept avt in reverse video mode/no status line, 12657 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 12658 use=avt-ns, 12659avt-w-ns|concept avt in 132 column mode/no status line, 12660 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 12661 use=avt-ns, 12662avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, 12663 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 12664 smcup=\E[H\E[1;24;1;132w, use=avt-ns, 12665 12666# Concept AVT with status line. We get the status line using the 12667# "Background status line" feature of the terminal. We swipe the 12668# first line of memory in window 2 for the status line, keeping 12669# 191 lines of memory and 24 screen lines for regular use. 12670# The first line is used instead of the last so that this works 12671# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this 12672# assumes an 8 page AVT but lm isn't currently used anywhere.) 12673# 12674avt+s|concept avt status line changes, 12675 eslok, hs, 12676 lm#191, 12677 dsl=\E[0*w, fsl=\E[1;1!w, 12678 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, 12679 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, 12680 tsl=\E[2;1!w\E[;%p1%dH\E[2K, 12681avt|avt-s|concept-avt|avt w/80 columns, 12682 use=avt+s, use=avt-ns, 12683avt-rv|avt-rv-s|avt reverse video w/sl, 12684 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 12685 use=avt+s, use=avt-ns, 12686avt-w|avt-w-s|concept avt 132 cols+status, 12687 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 12688 use=avt+s, use=avt-ns, 12689avt-w-rv|avt-w-rv-s|avt wide+status+rv, 12690 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 12691 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, 12692 12693#### Contel Business Systems. 12694# 12695 12696# Contel c300 and c320 terminals. 12697contel300|contel320|c300|Contel Business Systems C-300 or C-320, 12698 am, in, xon, 12699 cols#80, lines#24, xmc#1, 12700 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 12701 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 12702 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 12703 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 12704 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 12705 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 12706 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 12707 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, 12708# Contel c301 and c321 terminals. 12709contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, 12710 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, 12711 use=contel300, 12712 12713#### Data General (dg) 12714# 12715# According to James Carlson <carlson@xylogics.com> writing in January 1995, 12716# the terminals group at Data General was shut down in 1991; all these 12717# terminals have thus been discontinued. 12718# 12719# DG terminals have function keys that respond to the SHIFT and CTRL keys, 12720# e.g., SHIFT-F1 generates a different code from F1. To number the keys 12721# sequentially, first the unmodified key codes are listed as F1 through F15. 12722# Then their SHIFT versions are listed as F16 through F30, their CTRL versions 12723# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as 12724# F46 through F60. This is done in the private "includes" below whose names 12725# start with "dgkeys+". 12726# 12727# DG terminals generally support 8 bit characters. For each of these terminals 12728# two descriptions are supplied: 12729# 1) A default description for 8 bits/character communications, which 12730# uses the default DG international character set and keyboard codes. 12731# 2) A description with suffix "-7b" for 7 bits/character communications. 12732# This description must use the NON-DEFAULT native keyboard language. 12733 12734# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), 12735# Ctrl/Shift fdkeys (kf34-kf44). 12736 12737dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, 12738 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, 12739 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 12740 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, 12741 kf11=\233011z, kf12=\233012z, kf13=\233013z, 12742 kf14=\233014z, kf15=\233000z, kf16=\233101z, 12743 kf17=\233102z, kf18=\233103z, kf19=\233104z, 12744 kf2=\233002z, kf20=\233105z, kf21=\233106z, 12745 kf22=\233107z, kf23=\233108z, kf24=\233109z, 12746 kf25=\233110z, kf26=\233111z, kf27=\233112z, 12747 kf28=\233113z, kf29=\233114z, kf3=\233003z, 12748 kf30=\233100z, kf31=\233201z, kf32=\233202z, 12749 kf33=\233203z, kf34=\233204z, kf35=\233205z, 12750 kf36=\233206z, kf37=\233207z, kf38=\233208z, 12751 kf39=\233209z, kf4=\233004z, kf40=\233210z, 12752 kf41=\233211z, kf42=\233212z, kf43=\233213z, 12753 kf44=\233214z, kf45=\233200z, kf46=\233301z, 12754 kf47=\233302z, kf48=\233303z, kf49=\233304z, 12755 kf5=\233005z, kf50=\233305z, kf51=\233306z, 12756 kf52=\233307z, kf53=\233308z, kf54=\233309z, 12757 kf55=\233310z, kf56=\233311z, kf57=\233312z, 12758 kf58=\233313z, kf59=\233314z, kf6=\233006z, 12759 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, 12760 khome=\233H, kprt=\233i, 12761 12762dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, 12763 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, 12764 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12765 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, 12766 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, 12767 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, 12768 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, 12769 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, 12770 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, 12771 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, 12772 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, 12773 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, 12774 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, 12775 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, 12776 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, 12777 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, 12778 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, 12779 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, 12780 kf9=\E[009z, khome=\E[H, kprt=\E[i, 12781 12782dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, 12783 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, 12784 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, 12785 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, 12786 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, 12787 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, 12788 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, 12789 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, 12790 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, 12791 kf8=^^x, kf9=^^y, khome=^H, 12792 12793dgkeys+15|Private entry describing 15 DG mode special keys, 12794 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, 12795 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, 12796 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, 12797 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, 12798 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, 12799 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, 12800 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, 12801 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, 12802 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, 12803 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, 12804 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, 12805 kf9=^^y, 12806 12807# Data General color terminals use the "Tektronix" color model. The total 12808# number of colors varies with the terminal model, as does support for 12809# attributes used in conjunction with color. 12810 12811# Removed u7, u8 definitions since they conflict with tack: 12812# Preserve user-defined colors in at least some cases. 12813# u7=^^Fh, 12814# Default is ACM mode. 12815# u8=^^F}20^^Fi^^F}21, 12816# 12817dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, 12818 bce, 12819 colors#16, ncv#53, pairs#256, 12820 op=\036Ad\036Bd, 12821 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12822 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12823 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 12824 12825dg+fixed|Fixed color info for DG D430C terminals in DG mode, 12826 use=dgunix+fixed, 12827 12828# Video attributes are coordinated using static variables set by "sgr", then 12829# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. 12830# (D=dim, U=underline, B=blink, R=reverse.) 12831dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, 12832 bce, 12833 colors#8, ncv#16, pairs#64, 12834 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, 12835 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12836 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12837 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12838 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12839 12840dg+color|Color info for Data General D470C terminals in ANSI mode, 12841 colors#16, ncv#53, pairs#256, 12842 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12843 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12844 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12845 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12846 use=dg+color8, 12847 12848dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, 12849 bce, 12850 colors#8, ncv#16, pairs#64, 12851 op=\036Ad\036Bd, 12852 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 12853 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 12854 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 12855 12856dgmode+color|Color info for Data General D470C terminals in DG mode, 12857 colors#16, pairs#256, 12858 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12859 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12860 use=dgmode+color8, 12861 12862dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, 12863 bce, ccc, 12864 colors#52, ncv#53, pairs#26, 12865 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X, 12866 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, 12867 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, 12868 scp=\036RG2%p1%02X, 12869 12870# Colors are in the order: normal, reverse, dim, dim + reverse. 12871dg+ccc|Configurable color info for DG D430C terminals in DG mode, 12872 bce, ccc, 12873 colors#52, ncv#53, pairs#26, 12874 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, 12875 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, 12876 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, 12877 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, 12878 12879# The generic DG terminal type (an 8-bit-clean subset of the 6053) 12880# Initialization string 1 sets: 12881# ^R - vertical scrolling enabled 12882# ^C - blinking enabled 12883dg-generic|Generic Data General terminal in DG mode, 12884 am, bw, msgr, xon, 12885 cols#80, lines#24, 12886 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 12887 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, 12888 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, 12889 smul=^T, use=dgkeys+11, 12890 12891# According to the 4.4BSD termcap file, the dg200 <cup> should be the 12892# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap 12893# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, 12894# maybe they were originally nuls (which would fit). 12895 12896dg200|data general dasher 200, 12897 OTbs, am, bw, 12898 cols#80, lines#24, 12899 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 12900 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, 12901 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, 12902 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, 12903 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, 12904 smso=^^D, smul=^T, 12905 12906# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL 12907dg210|dg-ansi|Data General 210/211, 12908 am, 12909 cols#80, lines#24, 12910 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 12911 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 12912 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12913 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, 12914 smso=\E[7;m, smul=\E[4;m, 12915# From: Peter N. Wan <ihnp4!gatech!gacsr!wan> 12916# courtesy of Carlos Rucalde of Vantage Software, Inc. 12917# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover. 12918# I suspect the d200 function keys actually work on the dg211, check it out.) 12919dg211|Data General d211, 12920 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, 12921 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, 12922 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, 12923 12924# dg450 from Cornell (not official) 12925dg450|dg6134|data general 6134, 12926 cub1@, cuf1=^X, use=dg200, 12927 12928# Not official... 12929# Note: lesser Dasher terminals will not work with vi because vi insists upon 12930# having a command to move straight down from any position on the bottom line 12931# and scroll the screen up, or a direct vertical scroll command. The 460 and 12932# above have both, the D210/211, for instance, has neither. We must use ANSI 12933# mode rather than DG mode because standard UNIX tty drivers assume that ^H is 12934# backspace on all terminals. This is not so in DG mode. 12935# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the 12936# grounds that there is no matching ":ml:" 12937dg460-ansi|Data General Dasher 460 in ANSI-mode, 12938 OTbs, am, msgr, ul, 12939 cols#80, it#8, lines#24, 12940 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, 12941 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, 12942 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 12943 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, 12944 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12945 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, 12946 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, 12947 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2, 12948 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, 12949 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05, 12950 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m, 12951 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR, 12952 u7=\E[6n, u8=\E[5n, u9=\E[0n, 12953# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) 12954# Data General 605x 12955# Ought to work for a Model 6242, Type D210 as well as a 605x. 12956# Note that the cursor-down key transmits ^Z. Job control users, beware! 12957# This also matches a posted description of something called a `Dasher 100' 12958# so there's a dg100 alias here. 12959# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) 12960dg6053-old|dg100|data general 6053, 12961 OTbs, am, bw, ul, 12962 cols#80, lines#24, 12963 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, 12964 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, 12965 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, 12966 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, 12967 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, 12968 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, 12969 smul=^T, 12970 12971# (Some performance can be gained over the generic DG terminal type) 12972dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, 12973 xon@, 12974 home=^P\0\0, ll=^P\0^W, use=dg-generic, 12975 12976# Like 6053, but adds reverse video and more keypad and function keys. 12977d200|d200-dg|Data General DASHER D200, 12978 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], 12979 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, 12980 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15, 12981 use=dg6053, 12982 12983# DASHER D210 series terminals in ANSI mode. 12984# Reverse video, no insert/delete character/line, 7 bits/character only. 12985# 12986# Initialization string 1 sets: 12987# <0 - scrolling enabled 12988# <1 - blink enabled 12989# <4 - print characters regardless of attributes 12990d210|d214|Data General DASHER D210 series, 12991 am, bw, msgr, xon, 12992 cols#80, lines#24, 12993 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, 12994 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 12995 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 12996 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, 12997 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, 12998 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, 12999 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m, 13000 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, 13001 13002# DASHER D210 series terminals in DG mode. 13003# Like D200, but adds clear to end-of-screen and needs XON/XOFF. 13004d210-dg|d214-dg|Data General DASHER D210 series in DG mode, 13005 xon, 13006 ed=^^FF, use=d200-dg, 13007 13008# DASHER D211 series terminals in ANSI mode. 13009# Like the D210, but with 8-bit characters and local printer support. 13010# 13011# Initialization string 2 sets: 13012# \E[2;1;1;1v 13013# 2;1 - 8 bit operations 13014# 1;1 - 8 bit (international) keyboard language 13015# \E(B - default primary character set (U.S. ASCII) 13016# \E)4 - default secondary character set (international) 13017# ^O - primary character set 13018# 13019d211|d215|Data General DASHER D211 series, 13020 km, 13021 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, 13022 use=d210, 13023 13024# Initialization string 2 sets: 13025# \E[2;0;1;0v 13026# 2;0 - 7 bit operations 13027# 1;0 - 7 bit (native) keyboard language 13028# \E(0 - default character set (the keyboard native language) 13029# ^O - primary character set 13030d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, 13031 km@, 13032 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, 13033 13034# Like the D210 series, but adds support for 8-bit characters. 13035# 13036# Reset string 2 sets: 13037# ^^N - secondary character set 13038# ^^FS0> - 8 bit international character set 13039# ^^O - primary character set 13040# ^^FS00 - default character set (matching the native keyboard language) 13041# 13042d211-dg|d215-dg|Data General DASHER D211 series in DG mode, 13043 km, 13044 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, 13045 13046d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, 13047 use=d211-dg, 13048 13049# Enhanced DG mode with changes to be more UNIX compatible. 13050d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, 13051 mc5i, 13052 it#8, 13053 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, 13054 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, 13055 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, 13056 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, 13057 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, 13058 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, 13059 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, 13060 rs2=\036N\036FS0E\036O\036FS00, 13061 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 13062 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, 13063 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, 13064d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, 13065 lines#25, 13066 is3=\036Fz2, use=d216+, 13067 13068d217-unix|Data General DASHER D217 in DG-UNIX mode, 13069 use=d216-unix, 13070d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, 13071 use=d216-unix-25, 13072 13073# DASHER D220 color terminal in ANSI mode. 13074# Like the D470C but with fewer colors and screen editing features. 13075# 13076# Initialization string 1 sets: 13077# \E[<0;<1;<4l 13078# <0 - scrolling enabled 13079# <1 - blink enabled 13080# <4 - print characters regardless of attributes 13081# \E[m - all attributes off 13082# Reset string 1 sets: 13083# \Ec - initial mode defaults (RIS) 13084# 13085d220|Data General DASHER D220, 13086 mc5i@, 13087 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 13088 use=dg+color8, use=d470c, 13089 13090d220-7b|Data General DASHER D220 in 7 bit mode, 13091 mc5i@, 13092 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 13093 use=dg+color8, use=d470c-7b, 13094 13095# Initialization string 3 sets: 13096# - default cursor (solid rectangle) 13097# Reset string 2 sets: 13098# ^^N - secondary character set 13099# ^^FS0> - 8 bit international character set 13100# ^^O - primary character set 13101# ^^FS00 - default character set (matching the native keyboard language) 13102# 13103d220-dg|Data General DASHER D220 color terminal in DG mode, 13104 mc5i@, 13105 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, 13106 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, 13107 use=d470c-dg, 13108 13109# DASHER D230C color terminal in ANSI mode. 13110# Like the D220 but with minor ANSI compatibility improvements. 13111# 13112d230c|d230|Data General DASHER D230C, 13113 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, 13114 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, 13115 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, 13116 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, 13117 smul=\E[4;50m, use=dgkeys+7b, use=d220, 13118 13119d230c-dg|d230-dg|Data General DASHER D230C in DG mode, 13120 use=d220-dg, 13121 13122# DASHER D400/D450 series terminals. 13123# These add intelligent features like insert/delete to the D200 series. 13124# 13125# Initialization string 2 sets: 13126# ^^FQ2 - default cursor (solid rectangle) 13127# ^^FW - character protection disabled 13128# ^^FJ - normal (80 column) mode 13129# ^^F\^ - horizontal scrolling enabled (for alignment) 13130# ^^FX004? - margins at columns 0 and 79 13131# ^^F] - horizontal scrolling disabled 13132# ^^O - primary character set 13133# ^^FS00 - default character set (the keyboard native language) 13134# - (should reset scrolling regions, but that glitches the screen) 13135# Reset string 1 sets: 13136# ^^FA - all terminal defaults except scroll rate 13137# Reset string 2 sets: 13138# ^^F] - horizontal scrolling disabled 13139# ^^FT0 - jump scrolling 13140# 13141d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, 13142 mc5i, 13143 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, 13144 cnorm=\036FQ2, dch1=^^K, dl1=^^FI, 13145 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, 13146 ich1=^^J, il1=^^FH, 13147 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, 13148 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, 13149 rs1=^^FA, rs2=\036F]\036FT0, 13150 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, 13151 sgr0=\017\025\035\036E\036O, smacs=^^N, 13152 vpa=\020\177%p1%c, use=d210-dg, 13153 13154# DASHER D410/D460 series terminals in ANSI mode. 13155# These add a large number of intelligent terminal features. 13156# 13157# Initialization string 1 sets: 13158# \E[<0;<1;<2;<4l 13159# <0 - scrolling enabled 13160# <1 - blink enabled 13161# <2 - horizontal scrolling enabled (for alignment) 13162# <4 - print characters regardless of attributes 13163# \E[5;0v - normal (80 column) mode 13164# \E[1;1;80w - margins at columns 1 and 80 13165# \E[1;6;<2h 13166# 1 - print all characters even if protected 13167# 6 - character protection disabled 13168# <2 - horizontal scrolling disabled 13169# - (should reset scrolling regions, but that glitches the screen) 13170# 13171# Initialization string 2 sets: 13172# \E[3;2;2;1;1;1v 13173# 3;2 - default cursor (solid rectangle) 13174# 2;1 - 8 bit operations 13175# 1;1 - international keyboard language 13176# \E(B - default primary character set (U.S. ASCII) 13177# \E)4 - default secondary character set (international) 13178# ^O - primary character set 13179# 13180# Reset string 1 sets: 13181# \Ec - initial mode defaults (RIS) 13182# \E[<2h - horizontal scrolling disabled 13183# 13184# Reset string 2 sets: 13185# \E[4;0;2;1;1;1v 13186# 4;0 - jump scrolling 13187# 2;1 - 8 bit operations 13188# 1;1 - 8 bit (international) keyboard language 13189# \E(B - default primary character set (U.S. ASCII) 13190# \E)4 - default secondary character set (international) 13191# 13192d410|d411|d460|d461|Data General DASHER D410/D460 series, 13193 mc5i, 13194 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, 13195 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 13196 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 13197 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, 13198 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, 13199 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, 13200 rs2=\E[4;0;2;1;1;1v\E(B\E)4, 13201 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;, 13202 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, 13203 13204# Initialization string 2 sets: 13205# \E[3;2;2;0;1;0v 13206# 3;2 - default cursor (solid rectangle) 13207# 2;0 - 7 bit operations 13208# 1;0 - 7 bit (native) keyboard language 13209# \E(0 - default character set (the keyboard native language) 13210# ^O - primary character set 13211# 13212# Reset string 2 sets: 13213# \E[4;0;2;0;1;0v 13214# 4;0 - jump scrolling 13215# 2;0 - 7 bit operations 13216# 1;0 - 7 bit (native) keyboard language 13217# \E(0 - default character set (the keyboard native language) 13218# 13219d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, 13220 km@, 13221 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, 13222 rs2=\E[4;0;2;0;1;0v\E(0, 13223 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, 13224 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, 13225 13226d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, 13227 km, 13228 enacs@, rmacs=\036FS00, 13229 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 13230 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, 13231 use=d400-dg, 13232 13233# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. 13234# 13235# Initialization string 1 sets: 13236# \E[<0;<1;<2;<4l 13237# <0 - scrolling enabled 13238# <1 - blink enabled 13239# <2 - horizontal scrolling enabled (for alignment) 13240# <4 - print characters regardless of attributes 13241# \E[5;1v - compressed (135 column) mode 13242# \E[1;1;126 - margins at columns 1 and 126 13243# \E[1;6;<2h 13244# 1 - print all characters even if protected 13245# 6 - character protection disabled 13246# <2 - horizontal scrolling disabled 13247# - (should reset scrolling regions, but that glitches the screen) 13248# 13249# Reset string 1 sets: 13250# \Ec - initial mode defaults (RIS) 13251# \E[5;1v - compressed (135 column) mode 13252# \E[1;1;126w - margins at columns 1 and 126 13253# \E[<2h - horizontal scrolling disabled 13254# 13255d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, 13256 cols#126, 13257 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 13258 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, 13259 13260d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, 13261 cols#126, 13262 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 13263 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, 13264 13265d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, 13266 use=d410-dg, 13267 13268# These add intelligent features like scrolling regions. 13269d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, 13270 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, 13271 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, 13272 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, 13273 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, 13274 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, 13275 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, 13276 vpa=\036FPFF%p1%2.2X, 13277 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 13278 use=d216+, 13279d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, 13280 cols#132, 13281 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, 13282 rs2=\036P@1\036FK\036FX0083, 13283 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, 13284 use=d412-unix, 13285d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, 13286 lines#25, 13287 is3=\036Fz2, 13288 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 13289 use=d462+, 13290d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, 13291 eslok, hs, 13292 clear=\036FG\036PH, fsl=\036F}01\022, 13293 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, 13294 tsl=\036F}00\036FP%p1%2.2X18\036PG, 13295 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, 13296 use=d462+, 13297 13298# Relative cursor motions are confined to the current window, 13299# which is not what the scrolling region specification expects. 13300# Thus, relative vertical cursor positioning must be deleted. 13301d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, 13302 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, 13303 cud1@, cuu1@, ll@, use=d462+, 13304 13305d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, 13306 use=d412-unix, 13307d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, 13308 use=d412-unix-w, 13309d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, 13310 use=d412-unix-25, 13311d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, 13312 use=d412-unix-s, 13313d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, 13314 use=d412-unix-sr, 13315 13316d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, 13317 use=d413-unix, 13318d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, 13319 use=d413-unix-w, 13320d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, 13321 use=d413-unix-25, 13322d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, 13323 use=d413-unix-s, 13324d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, 13325 use=d413-unix-sr, 13326 13327d430c-dg|d430-dg|Data General D430C in DG mode, 13328 use=d413-dg, use=dg+fixed, 13329d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, 13330 use=d413-dg, use=dg+ccc, 13331 13332d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, 13333 use=d413-unix, use=dgunix+fixed, 13334d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, 13335 use=d413-unix-w, use=dgunix+fixed, 13336d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, 13337 use=d413-unix-25, use=dgunix+fixed, 13338d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, 13339 use=d413-unix-s, use=dgunix+fixed, 13340d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, 13341 use=d413-unix-sr, use=dgunix+fixed, 13342d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, 13343 use=d413-unix, use=dgunix+ccc, 13344d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, 13345 use=d413-unix-w, use=dgunix+ccc, 13346d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, 13347 use=d413-unix-25, use=dgunix+ccc, 13348d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, 13349 use=d413-unix-s, use=dgunix+ccc, 13350d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, 13351 use=d413-unix-sr, use=dgunix+ccc, 13352 13353# DASHER D470C color terminal in ANSI mode. 13354# Like the D460 but with 16 colors and without a compressed mode. 13355# 13356# Initialization string 1 sets: 13357# \E[<0;<1;<2;<4l 13358# <0 - scrolling enabled 13359# <1 - blink enabled 13360# <2 - horizontal scrolling enabled (for alignment) 13361# <4 - print characters regardless of attributes 13362# \E[1;1;80w - margins at columns 1 and 80 13363# \E[1;6;<2h 13364# 1 - print all characters even if protected 13365# 6 - character protection disabled 13366# <2 - horizontal scrolling disabled 13367# - (should reset scrolling regions, but that glitches the screen) 13368# 13369d470c|d470|Data General DASHER D470C, 13370 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 13371 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, 13372 use=dg+color, use=d460, 13373 13374d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, 13375 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 13376 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;, 13377 use=dg+color, use=d460-7b, 13378 13379# Initialization string 2 sets: 13380# ^^FQ2 - default cursor (solid rectangle) 13381# ^^FW - character protection disabled 13382# ^^F\^ - horizontal scrolling enabled (for alignment) 13383# ^^FX004? - margins at columns 0 and 79 13384# ^^F] - horizontal scrolling disabled 13385# ^^O - primary character set 13386# ^^FS00 - default character set (the keyboard native language) 13387# - (should reset scrolling regions, but that glitches the screen) 13388# 13389d470c-dg|d470-dg|Data General DASHER D470C in DG mode, 13390 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, 13391 use=dgmode+color, use=d460-dg, 13392 13393# DASHER D555 terminal in ANSI mode. 13394# Like a D411, but has an integrated phone. 13395d555|Data General DASHER D555, 13396 use=d411, 13397d555-7b|Data General DASHER D555 in 7-bit mode, 13398 use=d411-7b, 13399d555-w|Data General DASHER D555 in wide mode, 13400 use=d411-w, 13401d555-7b-w|Data General DASHER D555 in wide 7-bit mode, 13402 use=d411-7b-w, 13403d555-dg|Data General DASHER D555 series in DG mode, 13404 use=d411-dg, 13405 13406# DASHER D577 terminal in ANSI mode. 13407# Like a D411, but acts as a keyboard for serial printers ("KSR" modes). 13408d577|Data General DASHER D577, 13409 use=d411, 13410d577-7b|Data General DASHER D577 in 7-bit mode, 13411 use=d411-7b, 13412d577-w|Data General DASHER D577 in wide mode, 13413 use=d411-w, 13414d577-7b-w|Data General DASHER D577 in wide 7-bit mode, 13415 use=d411-7b-w, 13416 13417d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, 13418 use=d411-dg, 13419 13420# DASHER D578 terminal. 13421# Like a D577, but without compressed mode; like a D470C in this respect. 13422# 13423# Initialization string 1 sets: 13424# \E[<0;<1;<2;<4l 13425# <0 - scrolling enabled 13426# <1 - blink enabled 13427# <2 - horizontal scrolling enabled (for alignment) 13428# <4 - print characters regardless of attributes 13429# \E[1;1;80w - margins at columns 1 and 80 13430# \E[1;6;<2h 13431# 1 - print all characters even if protected 13432# 6 - character protection disabled 13433# <2 - horizontal scrolling disabled 13434# - (should reset scrolling regions, but that glitches the screen) 13435# 13436d578|Data General DASHER D578, 13437 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, 13438d578-7b|Data General DASHER D578 in 7-bit mode, 13439 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, 13440 13441#### Datamedia (dm) 13442# 13443# Datamedia was headquartered in Nashua, New Hampshire until it went 13444# out of business in 1993, but the ID plates on the terminals referred 13445# to the factory in Pennsauken, NJ. The factory was sold to a PCB board 13446# manufacturer which threw out all information about the terminals. 13447# 13448 13449cs10|colorscan|Datamedia Color Scan 10, 13450 msgr, 13451 cols#80, lines#24, 13452 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 13453 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, 13454 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13455 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, 13456 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 13457cs10-w|Datamedia Color Scan 10 with 132 columns, 13458 cols#132, 13459 cup=\E[%i%p1%02d;%p2%03dH, use=cs10, 13460 13461# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) 13462dm1520|dm1521|datamedia 1520, 13463 OTbs, am, xenl, 13464 cols#80, it#8, lines#24, 13465 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 13466 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 13467 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 13468 khome=^Y, 13469# dm2500: this terminal has both <ich> and <smir>. Applications using 13470# termcap/terminfo directly (rather than through ncurses) might be confused. 13471dm2500|datamedia2500|datamedia 2500, 13472 OTbs, OTnc, 13473 cols#80, lines#24, 13474 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, 13475 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, 13476 dch1=\020\010\030\035$<10*>, 13477 dl1=\020\032\030\035$<10*>, el=^W, home=^B, 13478 ich1=\020\034\030\035$<10*>, 13479 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, 13480 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], 13481 smdc=^P, smir=^P, smso=^N, 13482# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) 13483# also, has a meta-key. 13484# From: <goldberger@su-csli.arpa> 13485# (dmchat: ":MT:" changed to ":km:" -- esr) 13486dmchat|dmchat version of datamedia 2500, 13487 km, 13488 dl1=\020\032\030\035$<2/>, 13489 il1=\020\n\030\035\030\035$<1*/>, use=dm2500, 13490# (dm3025: ":MT:" changed to ":km:" -- esr) 13491dm3025|datamedia 3025a, 13492 OTbs, km, 13493 cols#80, it#8, lines#24, 13494 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13495 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 13496 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, 13497 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, 13498 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, 13499 smir=\EP, smso=\EO1, 13500dm3045|datamedia 3045a, 13501 OTbs, am, eo, km@, ul, xenl, 13502 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, 13503 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, 13504 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, 13505 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, 13506 use=dm3025, 13507# Datamedia DT80 soft switches: 13508# 1 0=Jump 1=Smooth 13509# Autorepeat 0=off 1=on 13510# Screen 0=Dark 1=light 13511# Cursor 0=u/l 1=block 13512# 13513# 2 Margin Bell 0=off 1=on 13514# Keyclick 0=off 1=on 13515# Ansi/VT52 0=VT52 1=Ansi 13516# Xon/Xoff 0=Off 1=On 13517# 13518# 3 Shift3 0=Hash 1=UK Pound 13519# Wrap 0=Off 1=On 13520# Newline 0=Off 1=On 13521# Interlace 0=Off 1=On 13522# 13523# 4 Parity 0=Odd 1=Even 13524# Parity 0=Off 1=On 13525# Bits/Char 0=7 1=8 13526# Power 0=60Hz 1=50Hz 13527# 13528# 5 Line Interface 0=EIA 1=Loop 13529# Aux Interface 0=EIA 1=Loop 13530# Local Copy 0=Off 1=On 13531# Spare 13532# 13533# 6 Aux Parity 0=Odd 1=Even 13534# Aux Parity 0=Off 1=On 13535# Aux Bits/Char 0=7 1=8 13536# CRT Saver 0=Off 1=On 13537# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. 13538dm80|dmdt80|dt80|datamedia dt80/1, 13539 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, 13540 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 13541 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, 13542 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 13543 use=vt100, 13544# except in 132 column mode, where it needs a little padding. 13545# This is still less padding than the vt100, and you can always turn on 13546# the ^S/^Q handshaking, so you can use vt100 flavors for things like 13547# reverse video. 13548dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, 13549 cols#132, 13550 clear=\E[H\E[2J$<50/>, cud1=^J, 13551 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, 13552 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, 13553# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 13554dt80-sas|Datamedia DT803/DTX for SAS usage, 13555 am, bw, 13556 cols#80, lines#24, 13557 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 13558 bel=^G, clear=^L, cr=^M, 13559 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, 13560 cub1=^H, cud1=\EB, cuf1=^\, 13561 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, 13562 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, 13563 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, 13564 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, 13565 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, 13566 smso=\E$2\004, tbc=\E'0, 13567 13568# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL 13569# These aren't end-all Excel termcaps; but do insert/delete char/line 13570# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) 13571# The naming convention has been bent somewhat, with the use of E? (where 13572# E is for 'Excel') as # a name. This was done to distinguish the entries 13573# from the other Datamedias in use here, and yet to associate a model of 13574# the Excel terminals with the regular datamedia terminals that share 13575# major characteristics. 13576excel62|excel64|datamedia Excel 62, 13577 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 13578 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 13579 use=dt80, 13580excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, 13581 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 13582 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 13583 use=dt80w, 13584excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, 13585 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, 13586 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, 13587 smir=\E[4h, use=dt80, 13588 13589#### Falco 13590# 13591# Falco Data Products 13592# 440 Potrero Avenue 13593# Sunnyvale, CA 940864-196 13594# Vox: (800)-325-2648 13595# Fax: (408)-745-7860 13596# Net: techsup@charm.sys.falco.com 13597# 13598# Current Falco models as of 1995 are generally ANSI-compatible and support 13599# emulations of DEC VT-series, Wyse, and Televideo types. 13600# 13601 13602# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info 13603# This terminal was released around 1983 and was discontinued long ago. 13604# The standout and underline highlights are the same. 13605falco|ts1|ts-1|falco ts-1, 13606 OTbs, am, 13607 cols#80, it#8, lines#24, 13608 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 13609 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 13610 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, 13611 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 13612 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, 13613 smir=\Eq, smso=\Eg1, smul=\Eg1, 13614falco-p|ts1p|ts-1p|falco ts-1 with paging option, 13615 OTbs, am, da, db, mir, msgr, ul, 13616 cols#80, it#8, lines#24, 13617 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, 13618 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, 13619 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, 13620 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, 13621 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, 13622 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, 13623 smso=\Eg4, smul=\Eg1, 13624# (ts100: I added <rmam>/<smam> based on the init string -- esr) 13625ts100|ts100-sp|falco ts100-sp, 13626 am, mir, msgr, xenl, xon, 13627 cols#80, it#8, lines#24, vt#3, 13628 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13629 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 13630 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 13631 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 13632 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 13633 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 13634 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, 13635 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, 13636 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, 13637 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 13638 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 13639 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 13640 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 13641 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 13642 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 13643 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 13644 use=vt100+fnkeys, 13645ts100-ctxt|falco ts-100 saving context, 13646 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, 13647 13648#### Florida Computer Graphics 13649# 13650 13651# Florida Computer Graphics Beacon System, using terminal emulator program 13652# "host.com", as provided by FCG. This description is for an early release 13653# of the "host" program. Known bug: <ed> clears the whole screen, so it's 13654# commented out. 13655 13656# From: David Bryant <cbosg!djb> 1/7/83 13657beacon|FCG Beacon System, 13658 am, da, db, 13659 cols#80, lines#32, 13660 bel=\ESTART\r\E37\r\EEND\r$<1>, 13661 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, 13662 cub1=^H, cud1=^J, cuf1=\EV, 13663 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, 13664 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, 13665 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, 13666 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, 13667 rmul=\ESTART\r\E60\,0\r\EEND\r, 13668 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, 13669 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, 13670 smso=\ESTART\r\E70\,6\r\EEND\r$<20>, 13671 smul=\ESTART\r\E60\,1\r\EEND\r, 13672 13673#### Fluke 13674# 13675 13676# The f1720a differences from ANSI: no auto margin, destructive 13677# tabs, # of lines, funny highlighting and underlining 13678f1720|f1720a|fluke 1720A, 13679 xt, 13680 cols#80, lines#16, xmc#1, 13681 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 13682 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, 13683 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], 13684 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 13685 smso=\E[7m, smul=\E[4m, 13686 13687#### Liberty Electronics (Freedom) 13688# 13689# Liberty Electronics 13690# 48089 Fremont Blvd 13691# Fremont CA 94538 13692# Vox: (510)-623-6000 13693# Fax: (510)-623-7021 13694 13695# From: <faletti@berkeley.edu> 13696# (f100: added empty <acsc> to suppress a tic warning; 13697# made this relative to adm+sgr -- note that <invis> isn't 13698# known to work for f100 but does on the f110. --esr) 13699f100|freedom|freedom100|freedom model 100, 13700 OTbs, am, bw, hs, mir, msgr, xon, 13701 cols#80, lines#24, 13702 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, 13703 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 13704 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 13705 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, 13706 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, 13707 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, 13708 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, 13709 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 13710 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, 13711 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 13712 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 13713f100-rv|freedom-rv|freedom 100 in reverse video, 13714 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, 13715# The f110 and f200 have problems with vi(1). They use the ^V 13716# code for the down cursor key. When kcud1 is defined in terminfo 13717# as ^V, the Control Character Quoting capability (^V in insert mode) 13718# is lost! It cannot be remapped in vi because it is necessary to enter 13719# a ^V to to quote the ^V that is being remapped!!! 13720# 13721# f110/f200 users will have to decide whether 13722# to lose the down cursor key or the quoting capability. We will opt 13723# initially for leaving the quoting capability out, since use of VI 13724# is not generally applicable to most interactive applications 13725# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr) 13726f110|freedom110|Liberty Freedom 110, 13727 bw@, eslok, 13728 it#8, wsl#80, 13729 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, 13730 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, 13731 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, 13732 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 13733 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, 13734 smso=\EG<, tsl=\Ef, use=f100, 13735f110-14|Liberty Freedom 110 14inch, 13736 dch1@, use=f110, 13737f110-w|Liberty Freedom 110 - 132 cols, 13738 cols#132, use=f110, 13739f110-14w|Liberty Freedom 110 14in/132 cols, 13740 cols#132, 13741 dch1@, use=f110, 13742# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 13743f200|freedom200|Liberty Freedom 200, 13744 OTbs, am, eslok, hs, mir, msgr, xon, 13745 cols#80, it#8, lines#24, wsl#80, 13746 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, 13747 clear=^Z, cnorm=\E.1, cr=^M, 13748 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, 13749 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 13750 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, 13751 flash=\Eo$<200/>\En, fsl=^M, home=^^, 13752 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, 13753 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 13754 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 13755 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 13756 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 13757 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, 13758 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, 13759f200-w|Liberty Freedom 200 - 132 cols, 13760 cols#132, use=f200, 13761# The f200 has the ability to reprogram the down cursor key. The key is 13762# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, 13763# so powering the terminal off and on will not cause the change to be lost. 13764f200vi|Liberty Freedom 200 for vi, 13765 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, 13766f200vi-w|Liberty Freedom 200 - 132 cols for vi, 13767 cols#132, use=f200vi, 13768 13769#### GraphOn (go) 13770# 13771# Graphon Corporation 13772# 544 Division Street 13773# Campbell, CA 95008 13774# Vox: (408)-370-4080 13775# Fax: (408)-370-5047 13776# Net: troy@graphon.com (Troy Morrison) 13777# 13778# 13779# The go140 and go225 have been discontinued. GraphOn now makes X terminals, 13780# including one odd hybrid that starts out life on power-up as a character 13781# terminal, than can be switched to X graphics mode (driven over the serial 13782# line) by an escape sequence. No info on this beast yet. 13783# (go140: I added <rmam>/<smam> based on the init string -- esr) 13784go140|graphon go-140, 13785 OTbs, 13786 cols#80, it#8, lines#24, 13787 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C, 13788 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 13789 ed=\E[J$<10/>, el=\E[K, ht=^I, 13790 if=/usr/share/tabset/vt100, il1=\E[L, 13791 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, 13792 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 13793 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 13794 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 13795 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 13796 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 13797go140w|graphon go-140 in 132 column mode, 13798 am, 13799 cols#132, 13800 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, 13801 use=go140, 13802# Hacked up vt200 termcap to handle GO-225/VT220 13803# From: <edm@nwnexus.WA.COM> 13804# (go225: I added <rmam>/<smam> based on the init string -- esr) 13805go225|go-225|Graphon 225, 13806 OTbs, am, mir, xenl, 13807 cols#80, it#8, lines#25, vt#3, 13808 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 13809 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 13810 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 13811 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, 13812 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, 13813 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 13814 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, 13815 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 13816 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, 13817 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, 13818 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, 13819 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 13820 13821#### Harris (Beehive) 13822# 13823# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. 13824# Their terminal group is ancient history now (1995) though the parent 13825# company is still in business. 13826# 13827 13828# Beehive documentation is undated and marked Preliminary and has no figures 13829# so we must have early Superbee2 (Model 600, according to phone conversation 13830# with mfr.). It has proved reliable except for some missing padding 13831# (notably after \EK and <nl> at bottom of screen). 13832# 13833# The key idea is that AEP mode is poison for <cup> & that US's in 13834# the local memory should be avoided like the plague. That means 13835# that the 2048 character local buffer is used as 25 lines of 80 13836# characters, period. No scrolling local memory, folks. It also 13837# appears that we cannot use naked INS LINE feature since it uses 13838# US. The sbi fakes <il1> with an 80-space insert that may be too 13839# slow at low speeds; also spaces get converted to \040 which is 13840# too long for some programs (not vi). DEL LINE is ok but slow. 13841# 13842# The <nl> string is designed for last line of screen ONLY; cup to 13843# 25th line corrects the motion inherent in scrolling to Page 1. 13844# 13845# There is one understood bug. It is that the screen appears to 13846# pop to a new (blank) page after a <nel>, or leave a half-line 13847# ellipsis to a quad that is the extra 48 memory locations. The 13848# data received is dumped into memory but not displayed. Not to 13849# worry if <cup> is being used; the lines not displayed will be, 13850# whenever the cursor is moved up there. Since <cup> is addressed 13851# relative to MEMORY of window, nothing is lost; but beware of 13852# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended, 13853# therefore, is setenv MORE -c . 13854# 13855# WARNING: Not all features tested. 13856# 13857# Timings are assembled from 3 sources. Some timings may reflect 13858# SB2/Model 300 that were used if more conservative. 13859# Tested on a Model 600 at 1200 and 9600 bd. 13860# 13861# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly 13862# placed on the keyboard and useless because of AEP, is made 13863# into a backspace key. In use ESC must be pressed twice (to send) 13864# and sending ^C must be prefixed by ESC to avoid that weird 13865# transmit mode associated with ENTER key. 13866# 13867# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across 13868# the screen, then it has dropped into ENTER mode; hit 13869# RESET--ONLINE--!tset. 13870# 13871# As delivered this machine has a FATAL feature that will throw 13872# it into that strange transmit state (SPOW) if the space bar is 13873# hit after a CR is received, but before receiving a LF (or a 13874# few others). 13875# 13876# The circuits MUST be modified to eliminate the SPOW latch. 13877# This is done by strapping on chip A46 of the I/O board; cut 13878# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that 13879# chip. This mod has been checked out on a Mod 600 of Superbee II. 13880# With this modification absurdly high timings on cr are 13881# unnecessary. 13882# 13883# NOTE WELL that the rear panel switch should be set to CR/LF, 13884# not AEP! 13885# 13886sb1|beehive superbee, 13887 OTbs, am, bw, da, db, mir, ul, xsb, 13888 cols#80, lines#25, xmc#1, 13889 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, 13890 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, 13891 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, 13892 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, 13893 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>, 13894 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, 13895 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, 13896 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, 13897 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO, 13898 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, 13899 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, 13900 smso=\E_1, smul=\E_0, tbc=\E3, 13901sbi|superbee|beehive superbee at Indiana U., 13902 xsb, 13903 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, 13904 use=sb1, 13905# Alternate (older) description of Superbee - f1=escape, f2=^C. 13906# Note: there are at least 3 kinds of superbees in the world. The sb1 13907# holds onto escapes and botches ^C's. The sb2 is the best of the 3. 13908# The sb3 puts garbage on the bottom of the screen when you scroll with 13909# the switch in the back set to CRLF instead of AEP. This description 13910# is tested on the sb2 but should work on all with either switch setting. 13911# The f1/f2 business is for the sb1 and the <xsb> can be taken out for 13912# the other two if you want to try to hit that tiny escape key. 13913# This description is tricky: being able to use cup depends on there being 13914# 2048 bytes of memory and the hairy <nl> string. 13915superbee-xsb|beehive super bee, 13916 am, da, db, xsb, 13917 cols#80, it#8, lines#25, 13918 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J, 13919 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, 13920 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, 13921 home=\EH, ht=^I, hts=\E1, 13922 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, 13923 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, 13924 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 13925 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, 13926# This loses on lines > 80 chars long, use at your own risk 13927superbeeic|super bee with insert char, 13928 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, 13929sb2|sb3|fixed superbee, 13930 xsb@, use=superbee, 13931 13932#### Beehive Medical Electronics 13933# 13934# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999): 13935# Regarding your question though; Beehive terminals weren't made by Harris. 13936# They were made by Beehive Medical Electronics in Utah. They went out of 13937# business in the early '80s. 13938# 13939# (OK, then, I don't know why a couple of these say "harris beehive".) 13940# 13941 13942# Reports are that most of these Beehive entries (except superbee) have not 13943# been tested and do not work right. <rmso> is a trouble spot. Be warned. 13944 13945# (bee: <ich1> was empty, which is obviously bogus -- esr) 13946beehive|bee|harris beehive, 13947 OTbs, am, mir, 13948 cols#80, lines#24, 13949 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 13950 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 13951 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, 13952 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 13953 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, 13954 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, 13955 smir=\EQ, smso=\EdP, smul=\Ed`, 13956# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. 13957# good grief - does this entry make :sg:/:ug: when it doesn't have to? 13958# look at those spaces in <rmso>/<smso>. Seems strange to me... 13959# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you 13960# really care, cook up one using ^F -- esr) 13961beehive3|bh3m|beehiveIIIm|harris beehive 3m, 13962 OTbs, am, 13963 cols#80, it#8, lines#20, 13964 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, 13965 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, 13966 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s, 13967beehive4|bh4|beehive 4, 13968 am, 13969 cols#80, lines#24, 13970 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 13971 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, 13972# There was an early Australian kit-built computer called a "Microbee". 13973# It's not clear whether this is for one of those or for a relative 13974# of the Beehive. 13975microb|microbee|micro bee series, 13976 OTbs, am, 13977 cols#80, it#8, lines#24, 13978 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13979 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 13980 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 13981 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 13982 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@, 13983 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, 13984 13985# 8675, 8686, and bee from Cyrus Rahman 13986# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) 13987ha8675|harris 8675, 13988 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, 13989 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, 13990 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H, 13991 kf8=\177, kf9=\Ee, use=bee, 13992# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation 13993# in :is: -- esr) 13994ha8686|harris 8686, 13995 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, 13996 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003, 13997 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003, 13998 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003, 13999 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(, 14000 use=bee, 14001 14002#### Hazeltine 14003# 14004# Hazeltine appears to be out of the terminal business as of 1995. These 14005# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with 14006# Harris. They have a hazeltine.com domain (but no web page there ) and can 14007# be reached at: 14008# 14009# Hazeltine 14010# 450 East Pulaski Road 14011# Greenlawn, New York 11740 14012# 14013# As late as 1993, manuals for the terminal product line could still be 14014# purchased from: 14015# 14016# TRW Customer Service Division 14017# 15 Law Drive 14018# P.O. Box 2076 14019# Fairfield, NJ 07007-2078 14020# 14021# They're now (1998) a subsidiary of General Electric, operating under the 14022# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page 14023# at <http://www.gec.com/cpd/1ncpd.htm#1.55>. 14024# 14025 14026# Since <cuf1> is blank, when you want to erase something you 14027# are out of luck. You will have to do ^L's a lot to 14028# redraw the screen. h1000 is untested. It doesn't work in 14029# vi - this terminal is too dumb for even vi. (The code is 14030# there but it isn't debugged for this case.) 14031hz1000|hazeltine 1000, 14032 OTbs, 14033 cols#80, lines#12, 14034 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K, 14035 ind=^J, 14036# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 14037hz1420|hazeltine 1420, 14038 OTbs, am, 14039 cols#80, lines#24, 14040 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, 14041 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, 14042 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, 14043 smso=\E^_, 14044# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents 14045# freakout with out-of-range args and tn3270. No hz since it needs to 14046# receive tildes. 14047hz1500|hazeltine 1500, 14048 OTbs, am, hz, 14049 cols#80, lines#24, 14050 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14051 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, 14052 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, 14053 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P, 14054 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, 14055# h1510 assumed to be in sane escape mode. Else use h1500. 14056# (h1510: early versions of this entry apparently had "<rmso=\E^_>, 14057# <smso=\E^Y>, but these caps were commented out in 8.3; also, 14058# removed incorrect and overridden ":do=^J:" -- esr) 14059hz1510|hazeltine 1510, 14060 OTbs, am, 14061 cols#80, lines#24, 14062 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, 14063 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, 14064 el=\E^O, il1=\E^Z, ind=^J, 14065# Hazeltine 1520 14066# The following switch settings are assumed for normal operation: 14067# FULL CR U/L_CASE ESCAPE 14068# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON 14069# Other switches may be set for operator convenience or communication 14070# requirements. 14071hz1520|Hazeltine 1520, 14072 OTbs, am, bw, msgr, 14073 cols#80, lines#24, 14074 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, 14075 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 14076 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, 14077 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, 14078 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, 14079 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, 14080# This version works with the escape switch off 14081# (h1520: removed incorrect and overridden ":do=^J:" -- esr) 14082hz1520-noesc|hazeltine 1520, 14083 am, hz, 14084 cols#80, lines#24, 14085 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14086 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, 14087 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, 14088# Note: the h1552 appears to be the first Hazeltine terminal which 14089# is not braindamaged. It has tildes and backprimes and everything! 14090# Be sure the auto lf/cr switch is set to cr. 14091hz1552|hazeltine 1552, 14092 OTbs, 14093 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, 14094 lf2=red, lf3=green, use=vt52, 14095hz1552-rv|hazeltine 1552 reverse video, 14096 cud1=^J, rmso=\ET, smso=\ES, use=hz1552, 14097# Note: h2000 won't work well because of a clash between upper case and ~'s. 14098hz2000|hazeltine 2000, 14099 OTbs, OTnc, am, 14100 cols#74, lines#27, 14101 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J, 14102 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, 14103 il1=~\032$<6>, ind=^J, pad=\177, 14104# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: 14105# I tested this termcap entry for the Hazeltine Esprit with vi. It seems 14106# to work ok. There is one problem though if one types a lot of garbage 14107# characters very fast vi seems not able to keep up and hangs while trying 14108# to insert. That's in insert mode while trying to insert in the middle of 14109# a line. It might be because the Esprit doesn't have insert char and delete 14110# char as a built in function. Vi has to delete to end of line and then 14111# redraw the rest of the line. 14112esprit|Hazeltine Esprit I, 14113 OTbs, am, bw, 14114 cols#80, lines#24, 14115 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, 14116 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 14117 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H, 14118 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J, 14119 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J, 14120 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R, 14121 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, 14122 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, 14123esprit-am|hazeltine esprit auto-margin, 14124 am, use=esprit, 14125# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL 14126# Vi it seems always wants to send a control J for "do" and it turned out 14127# that the terminal would work somewhat if the auto LF/CR was turned off. 14128# (hmod1: removed :dn=~^K: -- esr) 14129hmod1|Hazeltine Modular 1, 14130 OTbs, am, hz, 14131 cols#80, lines#24, 14132 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14133 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, 14134 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, 14135 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, 14136# 14137# Hazeltine Executive 80 Model 30 (1554?) 14138# from Will Martin <control@ALMSA-1.ARPA> via BRL 14139# Like VT100, except for different "am" behavior. 14140hazel|exec80|h80|he80|Hazeltine Executive 80, 14141 OTbs, OTpt, am, 14142 cols#80, it#8, lines#24, vt#3, 14143 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 14144 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 14145 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 14146 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 14147 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 14148 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 14149 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 14150 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 14151 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 14152 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 14153 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 14154 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, 14155 smul=\E[4m$<2/>, 14156 14157#### IBM 14158# 14159 14160ibm327x|line mode IBM 3270 style, 14161 gn, 14162 clear=^M^J, el=^M, home=^M, 14163 14164ibm3101|i3101|IBM 3101-10, 14165 OTbs, am, xon, 14166 cols#80, lines#24, 14167 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14168 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 14169 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, 14170 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH, 14171ibm3151|IBM 3151 display, 14172 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B, 14173 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;, 14174 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162, 14175# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 14176# removed kend, knp, kpp -TD 14177ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, 14178 OTbs, am, mir, msgr, 14179 cols#80, it#8, lines#24, 14180 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370, 14181 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED, 14182 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 14183 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J, 14184 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1, 14185 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, 14186 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r, 14187 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r, 14188 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r, 14189 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r, 14190 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r, 14191 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r, 14192 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN, 14193 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A, 14194 rmso=\E4@, rmul=\E4@, 14195 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;, 14196 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, 14197 14198ibm3161-C|IBM 3161-C NLS terminal using cartridge, 14199 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161, 14200ibm3162|IBM 3162 display, 14201 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a, 14202 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, 14203 use=ibm3161-C, 14204 14205# This really should not use setab/setaf, but it is clear that the 14206# original terminfo does not toggle red/blue colors as in setb/setf. 14207ibm3164|i3164|IBM 3164, 14208 msgr, 14209 colors#8, pairs#64, 14210 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, 14211 setab=\E4 %p1%{64}%+%c, 14212 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, 14213 smcup=\E!9/N\E>B, use=ibm3161, 14214 14215ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, 14216 am, bw, msgr, xon, 14217 cols#80, it#8, lines#25, 14218 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 14219 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 14220 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 14221 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14222 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 14223 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, 14224 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 14225 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, 14226 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14227 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, 14228 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, 14229 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, 14230 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, 14231 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, 14232 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, 14233 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, 14234 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, 14235 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, 14236 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 14237 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, 14238 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, 14239 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l, 14240 rmso=\E[m, rmul=\E[m, rs2=\Ec, 14241 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 14242 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14243 14244ibmaed|IBM Experimental display, 14245 OTbs, am, eo, msgr, 14246 cols#80, it#8, lines#52, 14247 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, 14248 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 14249 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, 14250 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 14251 rmso=\E0, sgr0=\E0, smso=\E0, 14252ibm-apl|apl|IBM apl terminal simulator, 14253 lines#25, use=dm1520, 14254# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. 14255# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) 14256ibmmono|IBM workstation monochrome, 14257 eslok, hs, 14258 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, 14259 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, 14260 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, 14261 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, 14262 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, 14263 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, 14264 use=ibm3101, 14265ibmega|IBM Enhanced Color Display, 14266 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14267 nel=^M^J, use=ibmmono, 14268# This color scheme is assumed in some recent IBM terminal descriptions 14269# (green on black, emulated on a 16-color terminal). 14270ibm+color|IBM color definitions, 14271 colors#8, ncv#3, pairs#64, 14272 op=\E[32m\E[40m, 14273 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;, 14274 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;, 14275ibm+16color|IBM aixterm color definitions, 14276 colors#16, pairs#256, 14277 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, 14278 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, 14279 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 14280 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 14281ibm5154|IBM 5154 Color display, 14282 colors#8, ncv@, pairs#64, 14283 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 14284 use=ibm+color, 14285ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, 14286 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, 14287 use=ibmmono, 14288ibmvga-c|IBM VGA display color termcap, 14289 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14290 nel=^M^J, use=ibmega-c, 14291ibmvga|IBM VGA display, 14292 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14293 nel=^M^J, use=ibmega, 14294# ibmapa* and ibmmono entries come from ACIS 4.3 distribution 14295rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, 14296 lines#32, 14297 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, 14298ibm6155|IBM 6155 Black & White display, 14299 blink@, bold@, use=ibm5151, 14300# Advanced Monochrome (6153) and Color (6154) Graphics Display: 14301ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, 14302 lines#31, 14303 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, 14304ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, 14305 lines#31, 14306 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, 14307 use=ibmega-c, 14308ibm6154|IBM 6154 Color displays, 14309 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 14310 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 14311 sgr0=\E[0;10m, use=ibm5154, 14312ibm6153|IBM 6153 Black & White display, 14313 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 14314 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 14315 sgr0=\E[0;10m, use=ibm5151, 14316ibm6153-90|IBM 6153 Black & White display, 14317 cols#90, lines#36, 14318 blink@, bold@, use=ibm5151, 14319ibm6153-40|IBM 6153 Black & White display, 14320 cols#40, lines#12, use=ibm6153-90, 14321ibm8512|ibm8513|IBM color VGA Terminal, 14322 am, mir, msgr, 14323 cols#80, it#8, lines#25, 14324 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m, 14325 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C, 14326 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 14327 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL, 14328 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A, 14329 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, 14330 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 14331 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m, 14332 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, 14333 rmir=\E[4l, rmso=\E[m, rmul=\E[m, 14334 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, 14335 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, 14336 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14337 use=ibm8503, 14338hft-c|HFT with Color, 14339 colors#8, pairs#64, 14340 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, 14341 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, 14342 use=ibm5151, use=ibm+color, 14343hft-c-old|HFT with Color PC850, 14344 colors#8, pairs#64, 14345 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 14346 use=ibm+color, 14347hft-old|AIWS High Function Terminal, 14348 am, xon, 14349 cols#80, lines#25, 14350 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 14351 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14352 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 14353 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, 14354 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14355 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 14356 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 14357 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, 14358 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, 14359 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color, 14360ibm-system1|system1|ibm system/1 computer, 14361 am, xt, 14362 cols#80, lines#24, 14363 bel=^G, clear=^Z, cub1=^H, cuf1=^\, 14364 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, 14365 ind=^J, 14366# lft-pc850 : IBM Low Function Terminal Device 14367# lft "supports" underline, bold, and blink in the sense that the lft code 14368# sets all the right bits. HOWEVER, depending upon the adapter, these 14369# attributes may or may not be supported by the device driver. 14370lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, 14371 am, bw, msgr, xon, 14372 cols#80, it#8, lines#25, 14373 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 14374 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14375 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 14376 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14377 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 14378 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, 14379 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, 14380 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, 14381 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, 14382 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, 14383 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, 14384 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, 14385 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, 14386 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, 14387 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, 14388 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, 14389 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, 14390 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, 14391 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 14392 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 14393 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, 14394 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT, 14395 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec, 14396 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 14397 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14398 tbc=\E[3g, 14399ibm5081|hft|IBM Megapel Color display, 14400 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, 14401 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, 14402ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, 14403 eslok, hs, 14404 lines#33, 14405 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, 14406 use=ibmega-c, 14407ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, 14408 use=hft-c, 14409ibm8514|IBM 8514/a color VGA display, 14410 eslok, hs, 14411 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, 14412ibm8514-c|IBM 8514 color display with standout and underline, 14413 eslok, hs, 14414 lines#41, 14415 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J, 14416 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo, 14417 use=ibmega-c, 14418 14419# 14420# AIX entries. IBM ships these with AIX 3.2.5. 14421# -- added rc, sc based on manpage -TD 14422# Note that we could use ibm+16color, but that is not how IBM defines this one. 14423aixterm|IBM Aixterm Terminal Emulator, 14424 eslok, hs, 14425 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 14426 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7, 14427 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 14428 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154, 14429aixterm-m|IBM AIXterm Monochrome Terminal Emulator, 14430 eslok, hs, 14431 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 14432 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, 14433 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 14434 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153, 14435aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, 14436 eslok, hs, 14437 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, 14438 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 14439 tsl=\E[?%p1%dT, use=ibm6153, 14440jaixterm|IBM Kanji Aixterm Terminal Eemulator, 14441 acsc@, use=aixterm, 14442jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, 14443 acsc@, use=aixterm-m, 14444 14445# This flavor is adapted from xterm, in turn from aixterm documentation -TD 14446aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors, 14447 use=ibm+16color, use=aixterm, 14448 14449#### Infoton/General Terminal Corp. 14450# 14451 14452# gt100 sounds like something DEC would come out with. Let's hope they don't. 14453i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), 14454 OTbs, am, 14455 cols#80, lines#24, 14456 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14457 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, 14458 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, 14459 ind=^J, rmso=\Ea, smso=\Eb, 14460i400|infoton 400, 14461 OTbs, am, 14462 cols#80, lines#25, 14463 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 14464 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A, 14465 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, 14466 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, 14467# (addrinfo: removed obsolete ":bc=^Z:" -- esr) 14468addrinfo, 14469 am, 14470 cols#80, lines#24, 14471 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, 14472 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\, 14473# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr) 14474infoton, 14475 am, 14476 cols#80, lines#24, 14477 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\, 14478 ed=^K, ind=^J, ll=^H^\, 14479 14480# The ICL6402 was actually the Kokusai Display System 6402. 14481# The 6404 was the KDS7372 (color version of the 6402). 14482# 14483# ICL6404 control codes follow: 14484# 14485#code function 14486#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 14487#ctrl-A set SOM position at cursor position 14488#ctrl-G Bell 14489#ctrl-H Backspace 14490#ctrl-I Horiz tab 14491#ctrl-J Linefeed 14492#ctrl-K Cursor up 14493#ctrl-L Cursor right 14494#ctrl-M Carriage return 14495#ctrl-N Disable xon/xoff to host 14496#ctrl-O Enable xon/xoff to host 14497#ctrl-R Enable bidirectional mode 14498#ctrl-T Disable bidirectional mode 14499#ctrl-V Cursor down 14500#ctrl-Z Clear unprotected data to insert char 14501#ctrl-^ Cursor home 14502#ctrl-_ Newline 14503# 14504#ESC lead-in char for multiple character command 14505# 14506#ESC space R execute power on sequence 14507#ESC ! p1 p2 define scroll region: 14508# p1 = scroll top line: 20h - 37h 14509# p1 = scroll bottom line: 20h - 37h 14510#ESC " unlock keyboard 14511#ESC # lock keyboard 14512#ESC $ Semi-graphics mode on 14513#ESC % Semi-graphics mode off 14514#ESC & protect mode on 14515#ESC ' protect mode off 14516#ESC ( write protect mode off (full intensity) 14517#ESC ) write protect mode on (half intensity) 14518# 14519#ESC * clear screen 14520#ESC + clear unprotected data to insert char 14521#ESC , clear unprotected data to half intensity spaces 14522#ESC - p1 p2 p3 p4 address cursor to page, row, column: 14523# p1 = page number 0 - 3 14524# p2 = row 20h - 7fh 14525# p3 = column (lo) 20h - 7fh 14526# p4 = column (hi) 20h - 21h (only 132 col) 14527#ESC . p1 set cursor style: 14528# p1 = 0 invisible cursor 14529# p1 = 1 block blinking cursor 14530# p1 = 2 block steady cursor 14531# p1 = 3 underline blinking cursor 14532# p1 = 4 underline steady cursor 14533#ESC / transmit cursor location (page, row, column) 14534#ESC 0 p1 p2 p3 p4 program edit key: 14535# p1 = edit key code: '@'-'S', '`'-'s' 14536# p2 p3 p4 = program data (3 bytes) 14537# 14538#ESC 1 set tab 14539#ESC 2 clear tab at cursor 14540#ESC 3 clear all tabs 14541#ESC 4 send unprotect line to cursor 14542#ESC 5 send unprotect page to cursor 14543#ESC 6 send line to cursor 14544#ESC 7 send page to cursor 14545#ESC 8 n set scroll mode: 14546# n = 0 set jump scroll 14547# n = 1 set smooth scroll 14548#ESC 9 n control display: 14549# n = 0 display off 14550# n = 1 display on 14551#ESC : clear unprotected data to null 14552#ESC ; clear unprotected data to insert char 14553# 14554#ESC < keyclick on 14555#ESC = p1 p2 address cursor to row, column 14556# p1 = row 20h - 7fh 14557# p2 = column (lo) 20h - 7fh 14558# p3 = column (hi) 20h - 21h (only 132 col) 14559#ESC > keyclick off 14560#ESC ? transmit cursor location (row, column) 14561# 14562#ESC @ copy print mode on 14563#ESC A copy print mode off 14564#ESC B block mode on 14565#ESC C block mode off (conversation mode) 14566#ESC D F set full duplex 14567#ESC D H set half duplex 14568#ESC E line insert 14569#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) 14570# 0 = black, 1 = red, 2 = green, 3 = yellow 14571# 4 = blue, 5 = magenta, 6 = cyan, 7 = white 14572#ESC G n set serial field attribute (n = 30h - 3Fh) 14573#ESC H n full graphics mode: 14574# n = 0 exit full graphics mode 14575# n = 1 enter full graphics mode 14576#ESC I back tab 14577#ESC J back page 14578#ESC K forward page 14579# 14580#ESC L unformatted page print 14581#ESC M L move window left (132 col mode only) 14582#ESC M R move window right (132 col mode only) 14583#ESC N set page edit (clear line edit) 14584#ESC O set line edit (clear page edit) 14585#ESC P formatted page print 14586#ESC Q character insert 14587#ESC R line delete 14588#ESC S send message unprotected only 14589#ESC T erase line to insert char 14590#ESC U set monitor mode (see ESC X, ESC u) 14591# 14592#ESC V n select video attribute mode: 14593# n = 0 serial field attribute mode 14594# n = 1 parallel character attribute mode 14595#ESC V 2 n define line attribute: 14596# n = 0 single width single height 14597# n = 1 single width double height 14598# n = 2 double width single height 14599# n = 3 double width double height 14600#ESC V 3 n select character font: 14601# n = 0 system font 14602# n = 1 user defined font 14603#ESC V 4 n select screen mode: 14604# n = 0 page screen mode 14605# n = 1 virtual screen mode 14606#ESC V 5 n control mouse mode: 14607# n = 0 disable mouse 14608# n = 1 enable sample mode 14609# n = 2 send mouse information 14610# n = 3 enable request mode 14611#ESC W character delete 14612#ESC X clear monitor mode (see ESC U, ESC u) 14613#ESC Y erase page to insert char 14614# 14615#ESC Z n send user/status line: 14616# n = 0 send user line 14617# n = 1 send status line 14618# n = 2 send terminal ID 14619#ESC [ p1 p2 p3 set character attribute (parallel char mode): 14620# p1: 0 = normal 14621# 1 = blank 14622# 2 = blink 14623# 3 = blink blank (= blank) 14624# 4 = reverse 14625# 5 = reverse blank 14626# 6 = reverse blink 14627# 7 = reverse blink blank (= reverse blank) 14628# 8 = underline 14629# 9 = underline blank 14630# : = underline blink 14631# ; = underline blink blank 14632# < = reverse underline 14633# = = reverse underline blank 14634# > = reverse underline blink 14635# ? = reverse underline blink blank 14636# p2, p3: f/grnd, b/grnd colour 14637# (see ESC F for colours) 14638# use ZZ for mono, eg. 14639# ESC [ 0 Z Z for normal 14640# ESC [ 4 Z Z for inverse etc. 14641# 14642#ESC \ n set page size: 14643# n = 1 24 lines/page 14644# n = 2 48 lines/page 14645# n = 3 72 lines/page 14646# n = 4 96 lines/page 14647#ESC ] n set Wordstar mode: 14648# n = 0 normal (KDS7372) mode 14649# n = 1 Wordstar mode 14650# 14651#ESC b set foreground colour screen 14652# 14653#ESC c n enter self-test mode: 14654# n = 0 exit self test mode 14655# n = 1 ROM test 14656# n = 2 RAM test 14657# n = 3 NVRAM test 14658# n = 4 screen display test 14659# n = 5 main/printer port test 14660# n = 6 mouse port test 14661# n = 7 graphics board test 14662# n = 8 graphics memory test 14663# n = 9 display all 'E' 14664# n = : display all 'H' 14665#ESC d set background colour screen 14666# 14667#ESC e n program insert char (n = insert char) 14668#ESC f text CR load user status line with 'text' 14669# 14670#ESC g display user status line on 25th line 14671#ESC h display system status line on 25th line 14672#ESC i tab 14673#ESC j reverse linefeed 14674#ESC k n duplex/local edit mode: 14675# n = 0 duplex edit mode 14676# n = 1 local edit mode 14677#ESC l n select virtual screen: 14678# n = 0 screen 1 14679# n = 1 screen 2 14680#ESC m save current config to NVRAM 14681#ESC n p1 select display screen: 14682# p1 = 0 screen 1 14683# p1 = 1 screen 2 14684# p1 = 2 screen 3 14685# p1 = 3 screen 4 14686#ESC o p1 p2 set characters/line and attribute: 14687# p1 = 0 80 chars/line 14688# 14689#ESC o p1 p2 set characters/line and attribute: 14690# p1 = 0 80 chars/line 14691# p1 = 1 132 chars/line 14692# p2 = 0 single width single height 14693# p2 = 1 single width double height 14694# p2 = 2 double width single height 14695# p2 = 3 double width double height 14696# 14697#ESC q insert mode on 14698#ESC r edit mode on 14699#ESC s send message all 14700#ESC t erase line to null 14701#ESC u clear monitor mode (see ESC U, ESC X) 14702#ESC v autopage mode on 14703#ESC w autopage mode off 14704#ESC x p1 p2 p3 define delimiter code... 14705#ESC y erase page to null 14706# 14707#ESC z 2 p1 p2 p3 p4 draw quadrangle: 14708# p1 = starting row 14709# p2 = starting column 14710# p3 = end row 14711# p4 = end column 14712# 14713#ESC { p1 p2 p3 p4 configure main port 14714# (baud, stop bits, parity, word length) 14715# 14716#ESC | p1 p2 text Ctrl-Y program function key with 'text': 14717# p1 = function key code: 14718# '1' - ';' normal f1- f11 14719# '<' - 'F' shifted f1 - f11 14720# p2 = program mode: 14721# 1 = FDX 14722# 2 = LOC 14723# 3 = HDX 14724# Ctrl-Y = terminator 14725# (use Ctrl-P to escape ^P, ^Y ) 14726# 14727#ESC } p1 p2 p3 p4 configure printer port 14728# (baud, stop bits, parity, word length) 14729#ESC ~ send system status 14730# 14731# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997 14732# 14733# Entry is by esr going solely on above information and is UNTESTED. 14734# This actually looks a lot like a Televideo 9xx. 14735# This entry uses page 0 and is monochrome; I'm not brave enough to try 14736# to make color work without a test terminal. The <am> capability is a guess. 14737# The initialization string sets conversation mode, blinking underline cursor, 14738# full duplex, parallel attribute mode, display user status line, white 14739# foreground, black background, normal highlight. 14740# 14741icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, 14742 OTbs, am, hs, 14743 cols#80, lines#24, 14744 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, 14745 cnorm=\E.3, cr=^M, 14746 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L, 14747 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, 14748 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I, 14749 hts=\E1, il1=\EE, invis=\E[1ZZ, 14750 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, 14751 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ, 14752 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, 14753 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ, 14754 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, 14755icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, 14756 rs2=\Eo1, use=icl6404, 14757 14758#### Interactive Systems Corp 14759# 14760# ISC used to sell OEMed and customized hardware to support ISC UNIX. 14761# ISC UNIX still exists in 1995, but ISC itself is no more; they got 14762# bought out by Sun. 14763# 14764 14765# From: <cithep!eric> Wed Sep 16 08:06:44 1981 14766# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the 14767# ":le=^_:" later overridden -- esr) 14768intext|Interactive Systems Corporation modified owl 1200, 14769 OTbs, am, 14770 cols#80, it#8, lines#24, xmc#1, 14771 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J, 14772 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, 14773 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, 14774 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, 14775 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, 14776 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, 14777 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, 14778 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%, 14779 smso=^V$\,, 14780intext2|intextii|INTERACTIVE modified owl 1251, 14781 am, bw, ul, 14782 cols#80, lines#24, xmc#0, 14783 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D, 14784 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 14785 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 14786 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, 14787 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, 14788 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, 14789 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, 14790 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, 14791 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, 14792 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, 14793 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, 14794 smul=\E[18 D, 14795 14796#### Kimtron (abm, kt) 14797# 14798# Kimtron seems to be history, but as March 1998 these people are still 14799# offering repair services for Kimtron equipment: 14800# 14801# Com/Pair Monitor Service 14802# 1105 N. Cliff Ave. 14803# Sioux Falls, South Dakota 57103 14804# 14805# WATS voice: 1-800/398-4946 14806# POTS fax: +1 605/338-8709 14807# POTS voice: +1 605/338-9650 14808# Email: <compair@sd.cybernex.net> 14809# Internet/Web: <http://www.com-pair.com> 14810# 14811# Kimtron entries include (undocumented) codes for: enter dim mode, 14812# enter bold mode, enter reverse mode, turn off all attributes. 14813# 14814 14815# Kimtron ABM 85 added by Dual Systems 14816# (abm85: removed duplicated ":kd=^J:" -- esr) 14817abm85|Kimtron ABM 85, 14818 OTbs, am, bw, msgr, 14819 cols#80, it#8, lines#24, xmc#1, 14820 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, 14821 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 14822 dl1=\ER, ed=\Ey, el=\Et, ht=^I, 14823 if=/usr/share/tabset/stdcrt, il1=\EE, 14824 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, 14825 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, 14826 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, 14827# Kimtron ABM 85H added by Dual Systems. 14828# Some notes about the abm85h entries: 14829# 1) there are several firmware revs of 85H in the world. Use abm85h-old for 14830# firmware revs prior to SP51 14831# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the 14832# abm85e entry if it is in tvi920 emulation mode. They are incompatible 14833# in some places and NOT software settable i.e., <is2> can't fix it) 14834# 3) In 85h mode, the arrow keys and special functions transmit when 14835# the terminal is in dup-edit, and work only locally in local-edit. 14836# Vi won't swallow `del char' for instance, but <smcup> turns on 14837# dup-edit anyway so that the arrow keys will work right. If the 14838# arrow keys don't work the way you like, change <smcup>, <rmcup>, and 14839# <is2>. Note that 920E mode does not have software commands to toggle 14840# between dup and local edit, so you get whatever was set last on the 14841# terminal. 14842# 4) <flash> attribute is nice, but seems too slow to work correctly 14843# (\Eb<pad>\Ed) 14844# 5) Make sure `hidden' attributes are selected. If `embedded' attributes 14845# are selected, the <xmc@> entry should be removed. 14846# 6) auto new-line should be on (selectable from setup mode only) 14847# 14848# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 14849abm85h|Kimtron ABM 85H native mode, 14850 hs, 14851 xmc@, 14852 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, 14853 fsl=^M, invis@, 14854 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, 14855 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr, 14856 use=abm85, 14857abm85e|Kimtron ABM 85H in 920E mode, 14858 xmc@, 14859 bel=^G, dim=\E), flash@, 14860 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, 14861 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 14862abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., 14863 xmc@, 14864 bel=^G, dim=\E), 14865 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, 14866 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 14867# From: <malman@bbn-vax.arpa> 14868# (kt7: removed obsolete :ma=^V^J^L :" -- esr) 14869kt7|kimtron model kt-7, 14870 OTbs, am, 14871 cols#80, it#8, lines#24, 14872 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, 14873 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 14874 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 14875 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", 14876 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, 14877 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, 14878 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 14879 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 14880 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr, 14881# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the 14882# other kt7 entry and the adjacent key capabilities). Removed EE which is 14883# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight 14884# but we can't figure out what. 14885kt7ix|kimtron model kt-7 or 70 in IX mode, 14886 am, bw, 14887 cols#80, it#8, lines#25, 14888 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, 14889 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 14890 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 14891 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, 14892 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, 14893 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, 14894 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, 14895 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 14896 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14897 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, 14898 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0, 14899 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, 14900 14901#### Microdata/MDIS 14902# 14903# This was a line of terminals made by McDonnell-Douglas Information Systems. 14904# These entries come direct from MDIS documentation. I have edited them only 14905# to move primary names of the form p[0-9] * to aliases, and to comment out 14906# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have 14907# also removed the change history; the last version indicates this is 14908# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). 14909# 14910 14911# McDonnell Information Systems Terminal Family History 14912# ========================================= 14913# 14914# Prism-1, Prism-2 and P99: 14915# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25. 14916# 14917# Prism-4 and Prism-5: 14918# Slightly less ancient range of Microdata terminals. Follow-on from 14919# Prism-2, but with many enhancements. P5 has eight display pages. 14920# 14921# Prism-6: 14922# A special terminal for use with library systems, primarily in Germany. 14923# Limited numbers. Similar functionality to P5 (except attributes?). 14924# 14925# Prism-7, Prism-8 and Prism-9: 14926# More recent range of MDIS terminals, in which P7 and P8 14927# replace the P4 & P5, with added functionality, and P9 is the flagship. 14928# The P9 has two emulation modes - P8 and ANSI - and includes a 14929# large number of the DEC VT220 control sequences. Both 14930# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. 14931# 14932# Prism-12 and Prism-14: 14933# Latest range, functionally very similar to the P9. The P14 has a 14934# black-on-white overscanning screen. 14935# 14936# The terminfo definitions given here are: 14937# 14938# p2 - Prism-2 (or Prism-1 or P99). 14939# 14940# p4 - Prism-4 (and older P7s & P8s). 14941# p5 - Prism-5 (or Prism-6). 14942# 14943# p7 - Prism-7. 14944# p8 - Prism-8 (in national or multinational mode). 14945# p8-w - 132 column version of p8. 14946# p9 - Prism-9 in ANSI mode. 14947# p9-w - 132 column version of p9. 14948# p9-8 - Prism-9 in Prism-8 emulation mode. 14949# p9-8-w - As p9-8, but with 132 columns. 14950# 14951# p12 - Prism-12 in ANSI mode. 14952# p12-w - 132 column version of p12. 14953# p12-m - Prism-12 in MDC emulation mode. 14954# p12-m-w - As p12-m, but with 132 columns. 14955# p14 - Prism-14 in ANSI mode. 14956# p14-w - 132 column version of p14. 14957# p14-m - Prism-14 in MDC emulation mode. 14958# p14-m-w - As p14-m, but with 132 columns. 14959# 14960# p2: Prism-2 14961# ----------- 14962# 14963# Includes Prism-1 and basic P99 without SP or MP loaded. 14964# The simplest form of Prism-type terminal. 14965# Basic cursor movement and clearing operations only. 14966# No video attributes. 14967# Notes: 14968# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 14969# value up, followed by backspace. 14970# 14971prism2|MDC Prism-2, 14972 am, bw, msgr, 14973 cols#80, lines#24, 14974 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 14975 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14976 cuu1=^Z, ed=\EJ, el=\EK, home=^A, 14977 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14978 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, 14979 14980# p4: Prism-4 14981# ----------- 14982# 14983# Includes early versions of P7 & P8. 14984# Basic family definition for most Prisms (except P2 and P9 ANSI). 14985# Notes: 14986# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 14987# value up, followed by backspace. 14988# Cursor key definitions removed because they interfere with vi and csh keys. 14989# 14990prism4|p4|P4|MDC Prism-4, 14991 am, bw, hs, mc5i, msgr, 14992 cols#80, lines#24, wsl#72, xmc#1, 14993 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>, 14994 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 14995 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14996 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, 14997 fsl=^]\345, home=^A, 14998 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14999 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, 15000 rev=^CD, rmso=^C\s, rmul=^C\s, 15001 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, 15002 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343, 15003 vpa=\013%p1%{32}%+%c, 15004 15005# p5: Prism-5 15006# ----------- 15007# 15008# Same definition as p4. Includes Prism-6 (not tested!). 15009# Does not use any multi-page features. 15010# 15011prism5|p5|P5|MDC Prism-5, 15012 use=p4, 15013 15014# p7: Prism-7 15015# ----------- 15016# 15017# Similar definition to p4. Uses ANSI cursor motion to avoid network problems. 15018# Notes: 15019# Use p4 for very early models of P7. 15020# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15021# 15022prism7|p7|P7|MDC Prism-7, 15023 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, 15024 15025# p8: Prism-8 15026# ----------- 15027# 15028# Similar definition to p7. Uses ANSI cursor motion to avoid network problems. 15029# Supports national and multinational character sets. 15030# Notes: 15031# Alternate char set operations only work in multinational mode. 15032# Use p4 for very early models of P8. 15033# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15034# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 15035# 15036prism8|p8|P8|MDC Prism-8, 15037 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, 15038 vpa=\E[%i%p1%dd, use=p4, 15039 15040# p8-w: Prism-8 in 132 column mode 15041# -------------------------------- 15042# 15043# 'Wide' version of p8. 15044# Notes: 15045# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15046# 15047prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, 15048 cols#132, 15049 is2=\E[<12h\E[<14h, use=p8, 15050 15051# p9: Prism-9 in ANSI mode 15052# ------------------------- 15053# 15054# The "flagship" model of this generation of terminals. 15055# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. 15056# Notes: 15057# Tabs only reset by "reset". Otherwise assumes default (8 cols). 15058# Fixes to deal with terminal firmware bugs: 15059# . 'ri' uses insert-line since rev index doesn't always 15060# . 'sgr0' has extra '0' since esc[m fails 15061# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 15062# Not covered in the current definition: 15063# . Labels 15064# . Programming Fn keys 15065# . Graphic characters (defaults correctly to vt100) 15066# . Padding values (sets xon) 15067# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 15068# 15069prism9|p9|P9|MDC Prism-9 in ANSII mode, 15070 am, bw, hs, mc5i, msgr, xenl, xon, 15071 cols#80, it#8, lines#24, vt#3, wsl#72, 15072 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, 15073 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v, 15074 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15075 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15076 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 15077 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, 15078 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, 15079 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 15080 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, 15081 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, 15082 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 15083 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 15084 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 15085 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 15086 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, 15087 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, 15088 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 15089 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N, 15090 sc=\E[%y, 15091 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;, 15092 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m, 15093 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, 15094 15095# p9-w: Prism-9 in 132 column mode 15096# -------------------------------- 15097# 15098# 'Wide' version of p9. 15099# 15100prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, 15101 cols#132, 15102 is2=\E[&p\E[<12l\E F\E[<14h, 15103 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, 15104 15105# p9-8: Prism-9 in P8 mode 15106# ------------------------ 15107# 15108# P9 terminal in P8 emulation mode. 15109# Similar to p8 definition. 15110# Insertion and deletion operations possible. 15111# 15112prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, 15113 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15114 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, 15115 15116# p9-8-w: Prism-9 in P8 and 132 column modes 15117# ------------------------------------------ 15118# 15119# P9 terminal in P8 emulation mode and 132 column mode. 15120# 15121prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, 15122 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15123 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, 15124 15125# p12: Prism-12 in ANSI mode 15126# --------------------------- 15127# 15128# See p9 definition. 15129# 15130prism12|p12|P12|MDC Prism-12 in ANSI mode, 15131 use=p9, 15132 15133# p12-w: Prism-12 in 132 column mode 15134# ---------------------------------- 15135# 15136# 'Wide' version of p12. 15137# 15138prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, 15139 use=p9-w, 15140 15141# p12-m: Prism-12 in MDC emulation mode 15142# ------------------------------------- 15143# 15144# P12 terminal in MDC emulation mode. 15145# Similar to p8 definition. 15146# Insertion and deletion operations possible. 15147# 15148prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, 15149 use=p9-8, 15150 15151# p12-m-w: Prism-12 in MDC emulation and 132 column modes 15152# ------------------------------------------------------- 15153# 15154# P12 terminal in MDC emulation mode and 132 column mode. 15155# 15156prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, 15157 use=p9-8-w, 15158 15159# p14: Prism-14 in ANSII mode 15160# --------------------------- 15161# 15162# See p9 definition. 15163# 15164prism14|p14|P14|MDC Prism-14 in ANSII mode, 15165 use=p9, 15166 15167# p14-w: Prism-14 in 132 column mode 15168# ---------------------------------- 15169# 15170# 'Wide' version of p14. 15171# 15172prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, 15173 use=p9-w, 15174 15175# p14-m: Prism-14 in MDC emulation mode 15176# ------------------------------------- 15177# 15178# P14 terminal in MDC emulation mode. 15179# Similar to p8 definition. 15180# Insertion and deletion operations possible. 15181# 15182prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, 15183 use=p9-8, 15184 15185# p14-m-w: Prism-14 in MDC emulation and 132 column modes 15186# ------------------------------------------------------- 15187# 15188# P14 terminal in MDC emulation mode and 132 column mode. 15189# 15190prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, 15191 use=p9-8-w, 15192 15193# End of McDonnell Information Systems Prism definitions 15194 15195# These things were popular in the Pick database community at one time 15196# From: George Land <georgeland@aol.com> 24 Sep 1996 15197p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, 15198 am, bw, hs, mir, 15199 cols#80, lines#24, ma#1, wsl#78, xmc#1, 15200 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, 15201 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, 15202 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U, 15203 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, 15204 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, 15205 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, 15206 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 15207 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, 15208 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M, 15209 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, 15210 smul=^C0, 15211 15212#### Microterm (act, mime) 15213# 15214# The mime1 entries refer to the Microterm Mime I or Mime II. 15215# The default mime is assumed to be in enhanced act iv mode. 15216# 15217 15218# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents 15219# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and 15220# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1> 15221# since Sytek insists ^S means xoff. 15222# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) 15223act4|microterm|microterm act iv, 15224 OTbs, am, 15225 cols#80, lines#24, 15226 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, 15227 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, 15228 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, 15229 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], 15230 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X, 15231 kcuu1=^Z, 15232# The padding on :sr: and :ta: for act5 and mime is a guess and not final. 15233# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... 15234# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) 15235act5|microterm5|microterm act v, 15236 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, 15237 use=act4, 15238# Mimes using brightness for standout. Half bright is really dim unless 15239# you turn up the brightness so far that lines show up on the screen. 15240mime-fb|full bright mime1, 15241 is2=^S\E, rmso=^S, smso=^Y, use=mime, 15242mime-hb|half bright mime1, 15243 is2=^Y\E, rmso=^Y, smso=^S, use=mime, 15244# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode 15245# the more plausible ":do=^J:" -- esr) 15246# uc was at one time disabled to get around a curses bug, be wary of it 15247mime|mime1|mime2|mimei|mimeii|microterm mime1, 15248 OTbs, am, 15249 cols#80, it#8, lines#24, vt#9, 15250 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, 15251 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, 15252 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, 15253 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, 15254 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, 15255# These termcaps (for mime2a) put the terminal in low intensity mode 15256# since high intensity mode is so obnoxious. 15257mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), 15258 OTbs, am, 15259 cols#80, lines#24, 15260 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 15261 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, 15262 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, 15263 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, 15264 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, 15265 smir=\EE, smso=\E\:, smul=\E6, 15266# This is the preferred mode (but ^X can't be used as a kill character) 15267mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), 15268 OTbs, 15269 cols#80, it#8, lines#24, 15270 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 15271 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, 15272 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, 15273 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, 15274 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, 15275 rmul=\E5, smir=^O, smso=\E8, smul=\E4, 15276# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) 15277mime3a|mime1 emulating 3a, 15278 am@, 15279 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, 15280mime3ax|mime-3ax|mime1 emulating enhanced 3a, 15281 it#8, 15282 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, 15283 use=mime3a, 15284# Wed Mar 9 18:53:21 1983 15285# We run our terminals at 2400 baud, so there might be some timing problems at 15286# higher speeds. The major improvements in this model are the terminal now 15287# scrolls down and insert mode works without redrawing the rest of the line 15288# to the right of the cursor. This is done with a bit of a kludge using the 15289# exit graphics mode to get out of insert, but it does not appear to hurt 15290# anything when using vi at least. If you have some users using act4s with 15291# programs that use curses and graphics mode this could be a problem. 15292mime314|mm314|mime 314, 15293 am, 15294 cols#80, lines#24, 15295 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, 15296 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, 15297 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, 15298# Microterm mime 340 from University of Wisconsin 15299mm340|mime340|mime 340, 15300 cols#80, lines#24, 15301 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 15302 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 15303 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, 15304 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,, 15305 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J, 15306# This came from University of Wisconsin marked "astro termcap for jooss". 15307# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; 15308# also added <rmam>/<smam> based on the init string -- esr) 15309mt4520-rv|micro-term 4520 reverse video, 15310 am, hs, msgr, xenl, xon, 15311 cols#80, it#8, lines#24, wsl#80, 15312 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, 15313 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 15314 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 15315 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 15316 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 15317 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, 15318 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 15319 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 15320 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, 15321 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 15322 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 15323 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, 15324 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, 15325 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, 15326 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 15327 tbc=\E[g, tsl=\E[25;1H, 15328 15329# Fri Aug 5 08:11:57 1983 15330# This entry works for the ergo 4000 with the following setups: 15331# ansi,wraparound,newline disabled, xon/xoff disabled in both 15332# setup a & c. 15333# 15334# WARNING!!! There are multiple versions of ERGO 4000 microcode 15335# Be advised that very early versions DO NOT WORK RIGHT !! 15336# Microterm does have a ROM exchange program- use it or lose big 15337# (ergo400: added <rmam>/<smam> based on the init string -- esr) 15338ergo4000|microterm ergo 4000, 15339 da, db, msgr, 15340 cols#80, lines#66, 15341 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B, 15342 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 15343 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, 15344 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>, 15345 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, 15346 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 15347 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, 15348 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, 15349 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, 15350 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, 15351 smso=\E[7m$<20>, 15352 15353#### NCR 15354# 15355# NCR's terminal group was merged with AT&T's when AT&T bought the company. 15356# For what happened to that group, see the ADDS section. 15357# 15358# There is an NCR4103 terminal that's just a re-badged Wyse-50. 15359# 15360 15361# The following vendor-supplied termcaps were captured from the Boundless 15362# Technologies site, 8 March 1998. I removed all-upper-case names that were 15363# identical, except for case, to lower-case ones. I also uncommented the acsc 15364# capabilities.X 15365# 15366# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 15367# DEC vt200/300 with color capabilities added. 15368ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 15369 colors#8, pairs#64, 15370 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 15371 use=ncr260vt300an, 15372# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 15373# DEC vt200/300 with color capabilities added. 15374ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 15375 colors#8, pairs#64, 15376 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 15377 use=ncr260vt300wan, 15378# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 15379# DEC vt200/300 with color capabilities added. 15380ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, 15381 colors#8, pairs#64, 15382 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 15383 use=ncr260vt300pp, 15384# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a 15385# DEC vt200/300 with color capabilities added. 15386ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode, 15387 colors#8, pairs#64, 15388 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 15389 use=ncr260vt300wpp, 15390# This definition for ViewPoint supports several attributes. This means 15391# that it has magic cookies (extra spaces where the attributes begin). 15392# Some applications do not function well with magic cookies. The System 15393# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 15394# If supporting various attributes is not vital, 'xmc#1' and the extra 15395# attributes can be removed. 15396# Mapping to ASCII character set ('acsc' capability) can also be 15397# restored if needed. 15398ncr260vppp|NCR 2900_260 viewpoint, 15399 am, bw, hs, km, mc5i, mir, msgr, xon, 15400 cols#80, lines#24, nlab#32, xmc#1, 15401 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 15402 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, 15403 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, 15404 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, 15405 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>, 15406 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1, 15407 il1=\EM$<2>, ind=\n$<2>, invis=\EG1, 15408 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 15409 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, 15410 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F, 15411 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r, 15412 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, 15413 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, 15414 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r, 15415 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, 15416 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, 15417 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, 15418 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, 15419 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, 15420 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, 15421 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, 15422 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15423 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 15424 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, 15425 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF, 15426ncr260vpwpp|NCR 2900_260 viewpoint wide mode, 15427 cols#132, 15428 cup=\Ea%i%p1%dR%p2%dC$<30>, 15429 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 15430 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 15431 use=ncr260vppp, 15432ncr260vt100an|NCR 2900_260 vt100 with ansi kybd, 15433 am, hs, mir, msgr, xenl, xon, 15434 cols#80, lines#24, nlab#32, 15435 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 15436 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 15437 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 15438 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, 15439 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 15440 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 15441 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 15442 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 15443 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 15444 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, 15445 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I, 15446 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, 15447 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, 15448 invis=\E[8m, 15449 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15450 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15451 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 15452 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, 15453 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, 15454 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, 15455 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15456 sc=\E7, 15457 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 15458 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, 15459 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, 15460 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, 15461ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, 15462 cols#132, 15463 cup=\E[%i%p1%d;%p2%dH$<30>, 15464 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15465 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15466 use=ncr260vt100an, 15467ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd, 15468 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15469 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 15470 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 15471 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~, 15472 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, 15473 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15474 smkx=\E=, use=ncr260vt100an, 15475ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd, 15476 cols#132, 15477 cup=\E[%i%p1%d;%p2%dH$<30>, 15478 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15479 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15480 use=ncr260vt100pp, 15481ncr260vt200an|NCR 2900_260 vt200 with ansi kybd, 15482 am, hs, mir, msgr, xenl, xon, 15483 cols#80, lines#24, nlab#32, 15484 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 15485 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 15486 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 15487 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 15488 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 15489 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 15490 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 15491 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 15492 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 15493 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 15494 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 15495 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 15496 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 15497 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15498 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15499 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 15500 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 15501 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 15502 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, 15503 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, 15504 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, 15505 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, 15506 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 15507 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 15508 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 15509 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, 15510 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, 15511 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 15512 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15513 sc=\E7, 15514 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 15515 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 15516 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 15517 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 15518 use=vt220+keypad, 15519ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, 15520 cols#132, 15521 cup=\E[%i%p1%d;%p2%dH$<30>, 15522 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 15523 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 15524 use=ncr260vt200an, 15525ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd, 15526 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 15527 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 15528 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 15529 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 15530 use=ncr260vt200an, 15531ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd, 15532 cols#132, 15533 cup=\E[%i%p1%d;%p2%dH$<30>, 15534 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15535 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15536 use=ncr260vt200pp, 15537ncr260vt300an|NCR 2900_260 vt300 with ansi kybd, 15538 am, hs, mir, msgr, xenl, xon, 15539 cols#80, lines#24, nlab#32, 15540 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 15541 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 15542 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 15543 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 15544 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 15545 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 15546 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 15547 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 15548 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 15549 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 15550 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 15551 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 15552 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 15553 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15554 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15555 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 15556 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 15557 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 15558 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, 15559 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, 15560 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, 15561 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, 15562 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 15563 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 15564 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 15565 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>, 15566 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 15567 rmul=\E[24m, 15568 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15569 sc=\E7, 15570 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 15571 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 15572 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 15573 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 15574 use=vt220+keypad, 15575ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd, 15576 cols#132, 15577 cup=\E[%i%p1%d;%p2%dH$<30>, 15578 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 15579 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 15580 use=ncr260vt300an, 15581ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd, 15582 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 15583 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 15584 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 15585 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 15586 use=ncr260vt300an, 15587NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd, 15588 cols#132, 15589 cup=\E[%i%p1%d;%p2%dH$<30>, 15590 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15591 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 15592 use=ncr260vt300pp, 15593# This terminfo file contains color capabilities for the Wyse325 emulation of 15594# the NCR 2900/260C color terminal. Because of the structure of the command 15595# (escape sequence) used to set color attributes, one of the fore/background 15596# colors must be preset to a given value. I have set the background color to 15597# black. The user can change this setup by altering the last section of the 15598# 'setf' definition. The escape sequence to set color attributes is 15599# ESC d y <foreground_color> <background_color> 1 15600# In addition, the background color can be changed through the desk accessories. 15601# The capablitiy 'op' sets colors to green on black (default combination). 15602# 15603# NOTE: The NCR Unix System Administrator's Shell will not function properly 15604# if the 'pairs' capability is defined. Un-Comment the 'pairs' 15605# capability and recompile if you wish to have it included. 15606# 15607ncr260wy325pp|NCR 2900_260 wyse 325, 15608 am, bw, hs, km, mc5i, mir, msgr, xon, 15609 colors#16, cols#80, lines#24, ncv#33, nlab#32, 15610 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 15611 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M, 15612 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 15613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 15614 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 15615 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I, 15616 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 15617 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15618 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 15619 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, 15620 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, 15621 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, 15622 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, 15623 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, 15624 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, 15625 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, 15626 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 15627 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, 15628 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 15629 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 15630 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 15631 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15632 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15633 setb=\s, 15634 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, 15635 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, 15636 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 15637 tsl=\EF, 15638ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode, 15639 cols#132, 15640 cup=\Ea%i%p1%dR%p2%dC$<30>, 15641 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15642 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15643 use=ncr260wy325pp, 15644# This definition for Wyse 350 supports several attributes. This means 15645# that it has magic cookies (extra spaces where the attributes begin). 15646# Some applications do not function well with magic cookies. The System 15647# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 15648# If supporting various attributes is not vital, 'xmc#1' and the extra 15649# attributes can be removed. 15650# Mapping to ASCII character set ('acsc' capability) can also be 15651# restored if needed. 15652# In addition, color capabilities have been added to this file. The drawback, 15653# however, is that the background color has to be black. The foreground colors 15654# are numbered 0 through 15. 15655# 15656# NOTE: The NCR Unix System Administrator's Shell does not function properly 15657# with the 'pairs' capability defined as below. If you wish to 15658# have it included, Un-comment it and recompile (using 'tic'). 15659# 15660ncr260wy350pp|NCR 2900_260 wyse 350, 15661 am, bw, hs, km, mc5i, mir, msgr, xon, 15662 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1, 15663 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 15664 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 15665 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 15666 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, 15667 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 15668 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I, 15669 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 15670 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15671 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 15672 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 15673 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 15674 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 15675 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 15676 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 15677 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 15678 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 15679 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 15680 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 15681 mc0=\EP$<10>, mc4=^T, mc5=^R, 15682 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, 15683 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 15684 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15685 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15686 setb=\s, 15687 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, 15688 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, 15689 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 15690 tsl=\EF, 15691ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode, 15692 cols#132, 15693 cup=\Ea%i%p1%dR%p2%dC$<30>, 15694 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 15695 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 15696 use=ncr260wy350pp, 15697# This definition for Wyse 50+ supports several attributes. This means 15698# that it has magic cookies (extra spaces where the attributes begin). 15699# Some applications do not function well with magic cookies. The System 15700# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 15701# If supporting various attributes is not vital, 'xmc#1' and the extra 15702# attributes can be removed. 15703# Mapping to ASCII character set ('acsc' capability) can also be 15704# restored if needed. 15705# (ncr260wy50+pp: originally contained commented-out 15706# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) 15707ncr260wy50+pp|NCR 2900_260 wyse 50+, 15708 am, bw, hs, km, mc5i, mir, msgr, xon, 15709 cols#80, lines#24, nlab#32, xmc#1, 15710 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 15711 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 15712 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 15713 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, 15714 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 15715 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>, 15716 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, 15717 invis=\EG1, 15718 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15719 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 15720 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 15721 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 15722 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 15723 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 15724 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 15725 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 15726 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 15727 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 15728 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 15729 mc0=\EP$<10>, mc4=^T, mc5=^R, 15730 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 15731 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 15732 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15733 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15734 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, 15735 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF, 15736ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode, 15737 cols#132, 15738 cup=\Ea%i%p1%dR%p2%dC$<30>, 15739 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 15740 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 15741 use=ncr260wy50+pp, 15742ncr260wy60pp|NCR 2900_260 wyse 60, 15743 am, bw, hs, km, mc5i, mir, msgr, xon, 15744 cols#80, lines#24, nlab#32, 15745 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 15746 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, 15747 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 15748 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 15749 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 15750 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>, 15751 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>, 15752 invis=\EG1, 15753 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15754 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 15755 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, 15756 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 15757 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 15758 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 15759 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, 15760 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, 15761 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, 15762 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, 15763 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 15764 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 15765 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, 15766 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 15767 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15768 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15769 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, 15770 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, 15771 tsl=\EF, 15772ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode, 15773 cols#132, 15774 cup=\Ea%i%p1%dR%p2%dC$<30>, 15775 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15776 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15777 use=ncr260wy60pp, 15778ncr160vppp|NCR 2900_160 viewpoint, 15779 use=ncr260vppp, 15780ncr160vpwpp|NCR 2900_160 viewpoint wide mode, 15781 use=ncr260vpwpp, 15782ncr160vt100an|NCR 2900_160 vt100 with ansi kybd, 15783 use=ncr260vt100an, 15784ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd, 15785 use=ncr260vt100pp, 15786ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, 15787 use=ncr260vt100wan, 15788ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd, 15789 use=ncr260vt100wpp, 15790ncr160vt200an|NCR 2900_160 vt200 with ansi kybd, 15791 use=ncr260vt200an, 15792ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd, 15793 use=ncr260vt200pp, 15794ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, 15795 use=ncr260vt200wan, 15796ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd, 15797 use=ncr260vt200wpp, 15798ncr160vt300an|NCR 2900_160 vt300 with ansi kybd, 15799 use=ncr260vt300an, 15800ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd, 15801 use=ncr260vt300pp, 15802ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, 15803 use=ncr260vt300wan, 15804ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd, 15805 use=ncr260vt300wpp, 15806ncr160wy50+pp|NCR 2900_160 wyse 50+, 15807 use=ncr260wy50+pp, 15808ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode, 15809 use=ncr260wy50+wpp, 15810ncr160wy60pp|NCR 2900_160 wyse 60, 15811 use=ncr260wy60pp, 15812ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode, 15813 use=ncr260wy60wpp, 15814ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, 15815 am, hs, mc5i, mir, msgr, xon, 15816 cols#80, it#8, lines#24, nlab#32, 15817 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, 15818 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, 15819 clear=\E[2J\E[1;1H$<300>, cr=^M, 15820 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, 15821 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, 15822 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, 15823 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, 15824 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, 15825 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, 15826 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, 15827 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, 15828 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, 15829 ind=\ED, 15830 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, 15831 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, 15832 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP, 15833 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, 15834 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, 15835 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, 15836 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 15837 sc=\E7, 15838 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>, 15839 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, 15840 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, 15841 tsl=\E[>+1$<70>, 15842ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, 15843 cols#132, 15844 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, 15845 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 15846 use=ncrvt100an, 15847# 15848# Vendor-supplied NCR termcaps end here 15849 15850# NCR7900 DIP switches: 15851# 15852# Switch A: 15853# 1-4 - Baud Rate 15854# 5 - Parity (Odd/Even) 15855# 6 - Don't Send or Do Send Spaces 15856# 7 - Parity Enable 15857# 8 - Stop Bits (One/Two) 15858# 15859# Switch B: 15860# 1 - Upper/Lower Shift 15861# 2 - Typewriter Shift 15862# 3 - Half Duplex / Full Duplex 15863# 4 - Light/Dark Background 15864# 5-6 - Carriage Return Without / With Line Feed 15865# 7 - Extended Mode 15866# 8 - Suppress Keyboard Display 15867# 15868# Switch C: 15869# 1 - End of line entry disabled/enabled 15870# 2 - Conversational mode / (Local?) Mode 15871# 3 - Control characters displayed / not displayed 15872# 4 - (2-wire?) / 4-wire communications 15873# 5 - RTS on and off for each character 15874# 6 - (50Hz?) / 60 Hz 15875# 7 - Exit after level zero diagnostics 15876# 8 - RS-232 interface 15877# 15878# Switch D: 15879# 1 - Reverse Channel (yes / no) 15880# 2 - Manual answer (no / yes) 15881# 3-4 - Cursor appearance 15882# 5 - Communication Rate 15883# 6 - Enable / Disable EXT turnoff 15884# 7 - Enable / Disable CR turnoff 15885# 8 - Enable / Disable backspace 15886# 15887# Since each attribute parameter is 0 or 1, we shift each attribute (standout, 15888# reverse, blink, dim, and underline) the appropriate number of bits (by 15889# multiplying the 0 or 1 by a correct factor to shift) so the bias character, 15890# '@' is (effectively) "or"ed with each attribute to generate the proper third 15891# character in the <ESC>0 sequence. The <sgr> string implements the following 15892# equation: 15893# 15894# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => 15895# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) 15896# 15897# Where: P1 <==> Standout attribute parameter 15898# P2 <==> Underline attribute parameter 15899# P3 <==> Reverse attribute parameter 15900# P4 <==> Blink attribute parameter 15901# P5 <==> Dim attribute parameter 15902# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. 15903ncr7900i|ncr7900|ncr 7900 model 1, 15904 am, bw, ul, 15905 cols#80, lines#24, xmc#1, 15906 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 15907 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J, 15908 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F, 15909 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, 15910 rmul=\E0@, 15911 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, 15912 sgr0=\E0@, smso=\E0Q, smul=\E0`, 15913ncr7900iv|ncr 7900 model 4, 15914 am, bw, eslok, hs, 15915 cols#80, lines#24, 15916 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 15917 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, 15918 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H, 15919 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, 15920 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 15921 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, 15922 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, 15923# Warning: This terminal will lock out the keyboard when it receives a CTRL-D. 15924# The user can enter a CTRL-B to get out of this locked state. 15925# In <hpa>, we want to output the character given by the formula: 15926# ((col / 10) * 16) + (col % 10) where "col" is "p1" 15927ncr7901|ncr 7901 model, 15928 am, bw, ul, 15929 cols#80, lines#24, 15930 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M, 15931 cub1=^H, cud1=^J, cuf1=^F, 15932 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, 15933 ed=\Ek, el=\EK, 15934 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J, 15935 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 15936 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, 15937 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016, 15938 sgr0=^O, smso=\E0Q\016, smul=\E0`\016, 15939 vpa=\013%p1%{64}%+%c, 15940 15941# Newbury Data Recording Limited (Newbury Data) 15942# 15943# Have been manufacturing and reselling various peripherals for a long time 15944# They don't make terminals anymore, but are still in business (in 2007). 15945# Their e-mail address is at ndsales@newburydata.co.uk 15946# and their post address is: 15947# 15948# Newbury Data Recording Ltd, 15949# Premier Park, Road One, 15950# Winsford, Cheshire, CW7 3PT 15951# 15952# Their technical support is still good, they sent me for free a printed copy 15953# of the 9500 user manual and I got it just 1 week after I first contacted them 15954# (in 2005)! 15955 15956# NDR 9500 15957# Manufactured in the early/mid eighties, behaves almost the same as a 15958# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but 15959# keep the same keyboard layout), add an optional 25-line mode, replace the DIP 15960# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC ! 15961# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is 15962# recognized: if you type in "ESC !", the next (third) character is not 15963# echoed, showing that the terminal was actually waiting for a parameter! 15964ndr9500|nd9500|Newbury Data 9500, 15965 am, bw, hs, mc5i, mir, msgr, ul, xon, 15966 cols#80, lines#24, wsl#79, 15967 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0, 15968 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 15969 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 15970 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 15971 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 15972 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO, 15973 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z, 15974 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 15975 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 15976 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, 15977 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, 15978 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 15979 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 15980 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_, 15981 pfloc=\E|%{48}%p1%+%c2%p2\031, 15982 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej, 15983 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N, 15984 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;, 15985 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O, 15986 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H, 15987 15988ndr9500-nl|NDR 9500 with no status line, 15989 hs@, 15990 wsl@, 15991 dsl@, fsl@, tsl@, use=ndr9500, 15992 15993ndr9500-25|NDR 9500 with 25th line enabled, 15994 lines#25, use=ndr9500, 15995 15996ndr9500-25-nl|NDR 9500 with 25 lines and no status line, 15997 lines#25, use=ndr9500-nl, 15998 15999ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink), 16000 msgr@, 16001 xmc#1, 16002 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, 16003 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c, 16004 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500, 16005 16006ndr9500-25-mc|NDR 500 with 25 lines and magic cookies, 16007 lines#25, use=ndr9500-mc, 16008 16009ndr9500-mc-nl|NDR 9500 with magic cookies and no status line, 16010 hs@, 16011 wsl@, 16012 dsl@, fsl@, tsl@, use=ndr9500-mc, 16013 16014ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line, 16015 lines#25, use=ndr9500-mc-nl, 16016 16017#### Perkin-Elmer (Owl) 16018# 16019# These are official terminfo entries from within Perkin-Elmer. 16020# 16021 16022bantam|pe550|pe6100|perkin elmer 550, 16023 OTbs, 16024 cols#80, lines#24, 16025 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 16026 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16027 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA, 16028fox|pe1100|perkin elmer 1100, 16029 OTbs, am, 16030 cols#80, lines#24, 16031 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 16032 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16033 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, 16034 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3, 16035owl|pe1200|perkin elmer 1200, 16036 OTbs, am, in, 16037 cols#80, lines#24, 16038 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 16039 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16040 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 16041 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 16042 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 16043 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 16044 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 16045 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, 16046pe1251|pe6300|pe6312|perkin elmer 1251, 16047 am, 16048 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, 16049 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 16050 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16051 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J, 16052 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, 16053 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, 16054# (pe7000m: this had 16055# rmul=\E!\0, smul=\E!\040, 16056# which is probably wrong, it collides with kf0 16057pe7000m|perkin elmer 7000 series monochrome monitor, 16058 am, 16059 cols#80, lines#24, 16060 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB, 16061 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 16062 ed=\EJ, el=\EI, home=\EH, ind=^J, 16063 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, 16064 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, 16065 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, 16066 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, 16067 ll=\ES7\s, ri=\ER, 16068pe7000c|perkin elmer 7000 series colour monitor, 16069 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, 16070 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m, 16071 16072#### Sperry Univac 16073# 16074# Sperry Univac has merged with Burroughs to form Unisys. 16075# 16076 16077# This entry is for the Sperry UTS30 terminal running the TTY 16078# utility under control of CP/M Plus 1R1. The functionality 16079# provided is comparable to the DEC vt100. 16080# (uts30: I added <rmam>/<smam> based on the init string -- esr) 16081uts30|sperry uts30 with cp/m@1R1, 16082 am, bw, hs, 16083 cols#80, lines#24, wsl#40, 16084 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 16085 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, 16086 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, 16087 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 16088 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16089 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, 16090 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H, 16091 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, 16092 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, 16093 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, 16094 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, 16095 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, 16096 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 16097 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, 16098 smul=\E[4m, tsl=\E], uc=\EPB, 16099 16100#### Tandem 16101# 16102# Tandem builds these things for use with its line of fault-tolerant 16103# transaction-processing computers. They aren't generally available 16104# on the merchant market, and so are fairly uncommon. 16105# 16106 16107tandem6510|adm3a repackaged by Tandem, 16108 use=adm3a, 16109 16110# A funny series of terminal that TANDEM uses. The actual model numbers 16111# have a fourth digit after 653 that designates minor variants. These are 16112# natively block-mode and rather ugly, but they have a character mode which 16113# this doubtless(?) exploits. There is a 6520 that is slightly dumber. 16114# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, 16115# removed <if=/usr/share/tabset/tandem653>, no such file -- esr) 16116tandem653|t653x|Tandem 653x multipage terminal, 16117 OTbs, am, da, db, hs, 16118 cols#80, lines#24, wsl#64, xmc#1, 16119 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, 16120 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, 16121 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, 16122 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, 16123 16124#### Tandy/Radio Shack 16125# 16126# Tandy has a line of VDTs distinct from its microcomputers. 16127# 16128 16129dmterm|deskmate terminal, 16130 am, bw, 16131 cols#80, lines#24, 16132 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H, 16133 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 16134 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, 16135 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, 16136 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, 16137 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, 16138 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, 16139 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, 16140 use=adm+sgr, 16141dt100|dt-100|Tandy DT-100 terminal, 16142 xon, 16143 cols#80, lines#24, xmc#1, 16144 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 16145 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 16146 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 16147 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 16148 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 16149 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, 16150 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, 16151 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, 16152 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, 16153 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, 16154 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, 16155 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 16156dt100w|dt-100w|Tandy DT-100 terminal (wide mode), 16157 cols#132, use=dt100, 16158dt110|Tandy DT-110 emulating ansi, 16159 xon, 16160 cols#80, lines#24, 16161 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 16162 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 16163 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 16164 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P, 16165 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, 16166 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, 16167 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, 16168 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~, 16169 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~, 16170 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1, 16171 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, 16172 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 16173 smacs=^N, smso=\E[7m, smul=\E[4m, 16174pt210|TRS-80 PT-210 printing terminal, 16175 hc, os, 16176 cols#80, 16177 bel=^G, cr=^M, cud1=^J, ind=^J, 16178 16179#### Tektronix (tek) 16180# 16181# Tektronix tubes are graphics terminals. Most of them use modified 16182# oscilloscope technology incorporating a long-persistence green phosphor, 16183# and support vector graphics on a main screen with an attached "dialogue 16184# area" for interactive text. 16185# 16186 16187tek|tek4012|tektronix 4012, 16188 OTbs, os, 16189 cols#75, lines#35, 16190 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J, 16191 ff=\014$<1000>, is2=\E^O, 16192# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16193tek4013|tektronix 4013, 16194 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, 16195tek4014|tektronix 4014, 16196 cols#81, lines#38, 16197 is2=\E\017\E9, use=tek4012, 16198# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16199tek4015|tektronix 4015, 16200 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, 16201tek4014-sm|tektronix 4014 in small font, 16202 cols#121, lines#58, 16203 is2=\E\017\E\:, use=tek4014, 16204# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16205tek4015-sm|tektronix 4015 in small font, 16206 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, 16207# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay> 16208# 16209# You need to have "stty nl2" in effect. Some versions of tset(1) know 16210# how to set it for you. 16211# 16212# It's got the Magic Cookie problem around stand-out mode. If you can't 16213# live with Magic Cookie, remove the :so: and :se: fields and do without 16214# reverse video. If you like reverse video stand-out mode but don't want 16215# it to flash, change the letter 'H' to 'P' in the :so: field. 16216tek4023|tektronix 4023, 16217 OTbs, am, 16218 OTdN#4, cols#80, lines#24, vt#4, xmc#1, 16219 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, 16220 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, 16221 rmso=^_@, smso=^_P, 16222# It is recommended that you run the 4025 at 4800 baud or less; 16223# various bugs in the terminal appear at 9600. It wedges at the 16224# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed 16225# on keyboard don't work. You have to hit BREAK twice to get 16226# one break at any speed - this is a documented feature. 16227# Can't use cursor motion because it's memory relative, and 16228# because it only works in the workspace, not the monitor. 16229# Same for home. Likewise, standout only works in the workspace. 16230# 16231# <el> was commented out since vi and rogue seem to work better 16232# simulating it with lots of spaces! 16233# 16234# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U 16235# and didn't seem necessary. 16236# 16237tek4024|tek4025|tek4027|tektronix 4024/4025/4027, 16238 OTbs, am, da, db, 16239 cols#80, it#8, lines#34, lm#0, 16240 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M, 16241 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, 16242 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r, 16243 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, 16244 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, 16245 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, 16246 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, 16247 ind=^F^J, 16248 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 16249 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r, 16250 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r, 16251tek4025-17|tek 4025 17 line window, 16252 lines#17, use=tek4025, 16253tek4025-17-ws|tek 4025 17 line window in workspace, 16254 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r, 16255 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, 16256 smso=\037att e\r, use=tek4025-17, 16257tek4025-ex|tek4027-ex|tek 4025/4027 w/!, 16258 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, 16259 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 16260# Tektronix 4025a 16261# From: Doug Gwyn <gwyn@brl-smoke.ARPA> 16262# The following status modes are assumed for normal operation (replace the 16263# initial "!" by whatever the current command character is): 16264# !COM 29 # NOTE: changes command character to GS (^]) 16265# ^]DUP 16266# ^]ECH R 16267# ^]EOL 16268# ^]RSS T 16269# ^]SNO N 16270# ^]STO 9 17 25 33 41 49 57 65 73 16271# Other modes may be set according to communication requirements. 16272# If the command character is inadvertently changed, termcap can't restore it. 16273# Insert-character cannot be made to work on both top and bottom rows. 16274# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. 16275# There also seems to be a problem with vertical motion, perhaps involving 16276# delete/insert-line, following a typed carriage return. This terminal sucks. 16277# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 16278# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't 16279# work any more. -- esr) 16280tek4025a|Tektronix 4025A, 16281 OTbs, OTpt, am, bw, da, db, xon, 16282 cols#80, it#8, lines#34, 16283 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], 16284 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, 16285 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;, 16286 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, 16287 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, 16288 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, 16289 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;, 16290 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;, 16291 tbc=\035sto;, 16292# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 16293# Here's the command file that I use to get rogue to work on the 4025. 16294# It should work with any program using the old curses (e.g. it better 16295# not try to scroll, or cursor addressing won't work. Also, you can't 16296# see the cursor.) 16297# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) 16298tek4025-cr|tek 4025 for curses and rogue, 16299 OTbs, am, 16300 cols#80, it#8, lines#33, 16301 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;, 16302 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J, 16303 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 16304 rmcup=\037wor 0, smcup=\037wor 33h, 16305# next two lines commented out since curses only allows 128 chars, sigh. 16306# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ 16307# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: 16308tek4025ex|4025ex|4027ex|tek 4025 w/!, 16309 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r, 16310 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 16311tek4105|tektronix 4105, 16312 OTbs, am, mir, msgr, ul, xenl, xt, 16313 cols#79, it#8, lines#29, 16314 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, 16315 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C, 16316 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, 16317 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 16318 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, 16319 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, 16320 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, 16321 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, 16322 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, 16323 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 16324 smul=\E[=5;<2m, tbc=\E[1g, 16325 16326# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr) 16327tek4105-30|4015 emulating 30 line vt100, 16328 am, mir, msgr, xenl, xon, 16329 cols#80, it#8, lines#30, vt#3, 16330 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 16331 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 16332 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 16333 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 16334 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 16335 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 16336 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 16337 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 16338 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 16339 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 16340 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 16341 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 16342 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 16343 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 16344 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 16345 use=vt100+fnkeys, 16346 16347# Tektronix 4105 from BRL 16348# The following setup modes are assumed for normal operation: 16349# CODE ansi CRLF no DABUFFER 141 16350# DAENABLE yes DALINES 30 DAMODE replace 16351# DAVISIBILITY yes ECHO no EDITMARGINS 1 30 16352# FLAGGING input INSERTREPLACE replace LFCR no 16353# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B 16354# SELECTCHARSET G1 0 TABS -2 16355# Other setup modes may be set for operator convenience or communication 16356# requirements; I recommend 16357# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 16358# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 16359# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 16360# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 16361# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 16362# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 16363# XMTDELAY 0 16364# and factory color maps. After setting these modes, save them with NVSAVE. No 16365# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 16366# "IC" cannot be used in combination with "im" & "ei". 16367# "tek4105a" is just a guess: 16368tek4105a|Tektronix 4105, 16369 OTbs, OTpt, msgr, xon, 16370 OTkn#8, cols#80, it#8, lines#30, vt#3, 16371 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 16372 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 16373 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 16374 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 16375 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16376 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 16377 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 16378 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 16379 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 16380 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16381 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 16382 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 16383 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 16384 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 16385 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 16386 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 16387 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 16388 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 16389 16390# 16391# Tektronix 4106/4107/4109 from BRL 16392# The following setup modes are assumed for normal operation: 16393# CODE ansi COLUMNMODE 80 CRLF no 16394# DABUFFER 141 DAENABLE yes DALINES 32 16395# DAMODE replace DAVISIBILITY yes ECHO no 16396# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace 16397# LFCR no LOCKKEYBOARD no ORIGINMODE relative 16398# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 16399# TABS -2 16400# Other setup modes may be set for operator convenience or communication 16401# requirements; I recommend 16402# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 16403# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 16404# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 16405# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 16406# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 16407# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 16408# XMTDELAY 0 16409# and factory color maps. After setting these modes, save them with NVSAVE. No 16410# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 16411# "IC" cannot be used in combination with "im" & "ei". 16412tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, 16413 msgr, xon, 16414 cols#80, it#8, lines#32, vt#3, 16415 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 16416 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 16417 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 16418 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 16419 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16420 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 16421 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 16422 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 16423 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 16424 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16425 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 16426 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 16427 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 16428 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 16429 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 16430 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 16431 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 16432 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, 16433 16434# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code: 16435# 0 selects Tek mode, i.e., \E%!0 16436# 1 selects ANSI mode 16437# 2 selects ANSI edit-mode 16438# 3 selects VT52 mode 16439# 16440# One odd thing about the description (which has been unchanged since the 90s) 16441# is that the cursor addressing is using VT52 mode, and a few others use the 16442# VT52's non-CSI versions of ANSI, e.g., \EJ. 16443tek4107|tek4109|tektronix terminals 4107 4109, 16444 OTbs, am, mir, msgr, ul, xenl, xt, 16445 cols#79, it#8, lines#29, 16446 bel=^G, blink=\E%!1\E[5m$<2>\E%!0, 16447 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M, 16448 cub1=^H, cud1=^J, cuf1=\EC, 16449 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, 16450 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J, 16451 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 16452 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI, 16453 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, 16454 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0, 16455 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, 16456 smul=\E%!1\E[4m$<2>\E%!0, 16457# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; 16458# see the note attached to tek4207. 16459tek4207-s|Tektronix 4207 with sysline but no memory, 16460 eslok, hs, 16461 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, 16462 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 16463 is2=\E7\E[?6l\E[2K\E[?6h\E8, 16464 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, 16465 16466# The 4110 series may be a wonderful graphics series, but they make the 4025 16467# look good for screen editing. In the dialog area, you can't move the cursor 16468# off the bottom line. Out of the dialog area, ^K moves it up, but there 16469# is no way to scroll. 16470# 16471# Note that there is a floppy for free from Tek that makes the 16472# 4112 emulate the vt52 (use the vt52 termcap). There is also 16473# an expected enhancement that will use ANSI standard sequences. 16474# 16475# 4112 in non-dialog area pretending to scroll. It really wraps 16476# but vi is said to work (more or less) in this mode. 16477# 16478# 'vi' works reasonably well with this entry. 16479# 16480otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series, 16481 am, 16482 cols#80, lines#34, 16483 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J, 16484 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, 16485# The 4112 with the ANSI compatibility enhancement 16486tek4112|tek4114|tektronix 4110 series, 16487 OTbs, am, db, 16488 cols#80, lines#34, 16489 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B, 16490 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, 16491 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, 16492 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, 16493 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 16494tek4112-nd|4112 not in dialog area, 16495 OTns, 16496 cuu1=^K, use=tek4112, 16497tek4112-5|4112 in 5 line dialog area, 16498 lines#5, use=tek4112, 16499# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake; 16500# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3. 16501# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were 16502# previously \0410 and \0411 sequences...I don't *think* they were supposed 16503# to be 4-digit octal -- esr) 16504tek4113|tektronix 4113 color graphics with 5 line dialog area, 16505 OTbs, am, da, eo, 16506 cols#80, lines#5, 16507 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, 16508 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 16509 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, 16510tek4113-34|tektronix 4113 color graphics with 34 line dialog area, 16511 lines#34, 16512 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, 16513# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not 16514# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . 16515# :vb: needs enough delay to let you see the background color being toggled. 16516tek4113-nd|tektronix 4113 color graphics with no dialog area, 16517 OTbs, am, eo, 16518 cols#80, it#8, lines#34, 16519 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, 16520 cvvis=\ELZ\EKA0, 16521 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 16522 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, 16523 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, 16524# This entry is from Tek. Inc. (Brian Biehl) 16525# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr) 16526otek4115|Tektronix 4115, 16527 OTbs, am, da, db, eo, 16528 cols#80, it#8, lines#34, 16529 cbt=\E[Z, clear=\E[H\E[2J, 16530 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, 16531 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 16532 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, 16533 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, 16534 il1=\E[L, 16535 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, 16536 kbs=^H, ri=\EM, rmam=\E[?7l, 16537 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, 16538 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 16539 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, 16540 smul=\E[4m, 16541tek4115|newer tektronix 4115 entry with more ANSI capabilities, 16542 am, xon, 16543 cols#80, lines#34, 16544 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 16545 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 16546 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16547 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 16548 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, 16549 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 16550 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, 16551 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 16552 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, 16553 rmso=\E[m, rmul=\E[m, 16554 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 16555 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 16556 vpa=\E[%p1%{1}%+%dd, 16557# The tek4125 emulates a vt100 incorrectly - the scrolling region 16558# command is ignored. The following entry replaces <csr> with the needed 16559# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125 16560# chokes on; and adds a lot of initialization for the tek dialog area. 16561# Note that this entry uses all 34 lines and sets the cursor color to green. 16562# Steve Jacobson 8/85 16563# (tek4125: there were two "\!"s in the is that I replaced with "\E!"; 16564# commented out, <smir>=\E1 because there's no <rmir> -- esr) 16565tek4125|tektronix 4125, 16566 lines#34, 16567 csr@, dl1=\E[1M, il1=\E[1L, 16568 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 16569 rc@, sc@, smkx=\E=, use=vt100, 16570 16571# From: <jcoker@ucbic> 16572# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO 16573# supplied another, less capable 4107 entry. So we'll use that for 4107 and 16574# note that if jcoker wasn't confused you may be able to use this one. 16575# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr) 16576tek4207|Tektronix 4207 graphics terminal with memory, 16577 am, bw, mir, msgr, ul, xenl, 16578 cols#80, it#8, lines#32, 16579 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, 16580 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16581 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, 16582 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, 16583 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, 16584 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 16585 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, 16586 rev=\E[7m, ri=\E[T, 16587 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, 16588 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, 16589 smul=\E[4m, tbc=\E[1g, 16590 16591# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985 16592# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!". 16593# Tab had been given as \E2I,that must be the tab-set capability -- esr) 16594tek4404|tektronix 4404, 16595 OTbs, 16596 cols#80, it#8, lines#32, 16597 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 16598 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 16599 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, 16600 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, 16601 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, 16602 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, 16603 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, 16604 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, 16605 smkx=\E[?1l, smso=\E[7m, smul=\E[4m, 16606# Some unknown person wrote: 16607# I added the is string - straight Unix has ESC ; in the login 16608# string which sets a ct8500 into monitor mode (aka 4025 snoopy 16609# mode). The is string here cleans up a few things (but not 16610# everything). 16611ct8500|tektronix ct8500, 16612 am, bw, da, db, 16613 cols#80, lines#25, 16614 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J, 16615 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, 16616 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, 16617 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, 16618 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, 16619 16620# Tektronix 4205 terminal. 16621# 16622# am is not defined because the wrap around occurs not when the char. 16623# is placed in the 80'th column, but when we are attempting to type 16624# the 81'st character on the line. (esr: hmm, this is like the vt100 16625# version of xenl, perhaps am + xenl would work!) 16626# 16627# Bold, dim, and standout are simulated by colors and thus not allowed 16628# with colors. The tektronix color table is mapped into the RGB color 16629# table by setf/setb. All colors are reset to factory specifications by oc. 16630# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the 16631# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- 16632# interval then maps into pre-defined value. 16633tek4205|tektronix 4205, 16634 ccc, mir, msgr, 16635 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, 16636 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 16637 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, 16638 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 16639 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 16640 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16641 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX, 16642 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 16643 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 16644 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1, 16645 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, 16646 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, 16647 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, 16648 kf7=\ES, 16649 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1, 16650 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=, 16651 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m, 16652 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 16653 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 16654 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N, 16655 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 16656 smul=\E[4m, tbc=\E[1g, 16657 16658#### Teletype (tty) 16659# 16660# These are the hardcopy Teletypes from before AT&T bought the company, 16661# clattering electromechanical dinosaurs in Bakelite cases that printed on 16662# pulpy yellow roll paper. If you remember these you go back a ways. 16663# Teletype-branded VDTs are listed in the AT&T section. 16664# 16665# The earliest UNIXes were designed to use these clunkers; nroff and a few 16666# other programs still default to emitting codes for the Model 37. 16667# 16668 16669tty33|tty35|model 33 or 35 teletype, 16670 hc, os, xon, 16671 cols#72, 16672 bel=^G, cr=^M, cud1=^J, ind=^J, 16673tty37|model 37 teletype, 16674 OTbs, hc, os, xon, 16675 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 16676 ind=^J, 16677 16678# There are known to be at least three flavors of the tty40, all seem more 16679# like IBM half duplex forms fillers than ASCII terminals. They have lots of 16680# awful braindamage, such as printing a visible newline indicator after each 16681# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is 16682# braindamaged but has hope and is described here. The 40-4 is a 3270 16683# lookalike and beyond hope. The terminal has visible bell but I don't know 16684# it - it's null here to prevent it from showing the BL character. 16685# There is an \EG in <nl> because of a bug in old vi (if stty says you have 16686# a "newline" style terminal (-crmode) vi figures all it needs is nl 16687# to get crlf, even if <cr> is not ^M.) 16688# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) 16689tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2, 16690 OTbs, xon, 16691 cols#80, lines#24, 16692 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, 16693 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, 16694 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, 16695 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], 16696 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, 16697 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, 16698tty43|model 43 teletype, 16699 OTbs, am, hc, os, xon, 16700 cols#132, 16701 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 16702 16703#### Tymshare 16704# 16705 16706# You can add <is2=\E<> to put this 40-column mode, though I can't 16707# for the life of me think why anyone would want to. 16708scanset|sc410|sc415|Tymshare Scan Set, 16709 am, bw, msgr, 16710 cols#80, lines#24, 16711 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, 16712 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 16713 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED, 16714 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0, 16715 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N, 16716 16717#### Volker-Craig (vc) 16718# 16719# If you saw a Byte Magazine cover with a terminal on it during the early 16720# 1980s, it was probably one of these. Carl Helmers liked them because 16721# they could crank 19.2 and were cheap (that is, he liked them until he tried 16722# to program one...) 16723# 16724 16725# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time 16726# every other linefeed. 16727vc303|vc103|vc203|volker-craig 303, 16728 OTbs, OTns, am, 16729 cols#80, lines#24, 16730 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 16731 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, 16732 kcuu1=^N, ll=\017$<1>W, 16733vc303a|vc403a|volker-craig 303a, 16734 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, 16735 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, 16736# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) 16737vc404|volker-craig 404, 16738 OTbs, am, 16739 cols#80, lines#24, 16740 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 16741 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 16742 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J, 16743 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, 16744vc404-s|volker-craig 404 w/standout mode, 16745 cud1=^J, rmso=^O, smso=^N, use=vc404, 16746# From: <wolfgang@cs.sfu.ca> 16747# (vc414: merged in cup/dl1/home from an old vc414h-noxon) 16748vc414|vc414h|Volker-Craig 414H in sane escape mode., 16749 OTbs, am, 16750 cols#80, lines#24, 16751 clear=\E\034$<40>, cud1=\E^K, cuf1=^P, 16752 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, 16753 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, 16754 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, 16755 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, 16756 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, 16757 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, 16758 rmso=\E^_, smso=\E^Y, 16759vc415|volker-craig 415, 16760 clear=^L, use=vc404, 16761 16762######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS 16763# 16764 16765#### IBM PC and clones 16766# 16767 16768# The pcplot IBM-PC terminal emulation program is really messed up. It is 16769# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, 16770# doesn't support scrolling regions, ignores add line commands, and ignores 16771# delete line commands. Consequently, the resulting behavior looks like a 16772# crude adm3a-type terminal. 16773# Steve Jacobson 8/85 16774pcplot|pc-plot terminal emulation program, 16775 xenl@, 16776 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100, 16777# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA> 16778# I've found that my KayPro II, running MDM730, continues to emulate an 16779# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX 16780# system the following termcap entry works well: 16781# I have noticed a couple of minor glitches, but nothing I can't work 16782# around. (I added two capabilities from the BRL entry -- esr) 16783kaypro|kaypro2|kaypro II, 16784 OTbs, am, 16785 cols#80, lines#24, 16786 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, 16787 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, 16788 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, 16789 16790# From IBM, Thu May 5 19:35:27 1983 16791# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr) 16792ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), 16793 OTbs, am, 16794 cols#80, lines#24, 16795 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\, 16796 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, 16797 16798ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, 16799 OTbs, am, bw, eo, hs, km, msgr, ul, 16800 cols#80, it#8, lines#24, 16801 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 16802 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 16803 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 16804 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16805 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 16806 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, 16807 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, 16808 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16809 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, 16810 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, 16811 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, 16812 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A, 16813 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m, 16814 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 16815 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 16816 16817#### Apple II 16818# 16819# Apple II firmware console first, then various 80-column cards and 16820# terminal emulators. For two cents I'd toss all these in the UFO file 16821# along with the 40-column apple entries. 16822# 16823 16824# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL 16825# 'it#8' tells UNIX that you have tabs every 8 columns. This is a 16826# function of TIC, not the firmware. 16827# The clear key on a IIgs will do something like clear-screen, 16828# depending on what you're in. 16829appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, 16830 OTbs, am, bw, eo, msgr, 16831 cols#80, it#8, lines#24, 16832 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 16833 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16834 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, 16835 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, 16836 smso=^O, 16837# Apple //e with 80-column card, entry from BRL 16838# The modem interface is permitted to discard LF (maybe DC1), otherwise 16839# passing characters to the 80-column firmware via COUT (PR#3 assumed). 16840# Auto-wrap does not work right due to newline scrolling delay, which also 16841# requires that you set "stty cr2". 16842# Note: Cursor addressing is only available via the Pascal V1.1 entry, 16843# not via the BASIC PR#3 hook. All this nonsense can be avoided only by 16844# using a terminal emulation program instead of the built-in firmware. 16845apple2e|Apple //e, 16846 bw, msgr, 16847 cols#80, lines#24, 16848 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, 16849 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, 16850 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, 16851 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 16852 smso=^O, 16853# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro 16854# 4.20, with incoming and outgoing terminals both on 0, emulation On. 16855apple2e-p|Apple //e via Pascal, 16856 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, 16857 kcud1=^J, use=apple2e, 16858# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL 16859# Enable DC3/DC1 flow control with "stty ixon -ixany". 16860apple-ae|ASCII Express, 16861 OTbs, am, bw, msgr, nxon, xon, 16862 cols#80, it#8, lines#24, 16863 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 16864 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16865 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J, 16866 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 16867 smso=^O, 16868appleII|apple ii plus, 16869 OTbs, am, 16870 cols#80, it#8, lines#24, 16871 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, 16872 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, 16873 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, 16874 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N, 16875 smso=^O, 16876# Originally by Gary Ford 21NOV83 16877# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 16878apple-80|apple II with smarterm 80 col, 16879 OTbs, am, bw, 16880 cols#80, lines#24, 16881 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, 16882 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 16883 ed=\013$<10*/>, el=\035$<10/>, home=^Y, 16884apple-soroc|apple emulating soroc 120, 16885 am, 16886 cols#80, lines#24, 16887 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 16888 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 16889 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 16890# From Peter Harrison, Computer Graphics Lab, San Francisco 16891# ucbvax!ucsfmis!harrison .....uucp 16892# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA 16893# "These two work. If you don't have the inverse video chip for the 16894# Apple with videx then remove the :so: and :se: fields." 16895# (apple-videx: this used to be called DaleApple -- esr) 16896apple-videx|Apple with videx videoterm 80 column board with inverse video, 16897 OTbs, am, xenl, 16898 cols#80, it#8, lines#24, 16899 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, 16900 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16901 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y, 16902 rmso=^Z2, sgr0=^Z2, smso=^Z3, 16903# My system [for reference] : Apple ][+, 64K, Ultraterm display card, 16904# Apple Cat ][ 212 modem, + more all 16905# controlled by ASCII Express: Pro. 16906# From Dave Shaver <isucs1!shaver> 16907apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, 16908 OTbs, am, eo, xt, 16909 cols#80, lines#24, 16910 acsc=, clear=^L, cuf1=^\, 16911 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16912 flash=^W35^W06, home=^Y, 16913 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, 16914 rmso=^N, smso=^O, 16915apple-uterm|Ultraterm for Apple micros, 16916 OTbs, am, eo, xt, 16917 cols#80, lines#24, 16918 acsc=, clear=^L, cuf1=^\, 16919 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16920 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, 16921# from trwrba!bwong (Bradley W. Wong): 16922# 16923# This entry assumes that you are using an apple with the UCSD Pascal 16924# language card. SYSTEM.MISCINFO is assumed to be the same as that 16925# supplied with the standard apple except that screenwidth should be set 16926# using SETUP to 80 columns. Note that the right arrow is not mapped in 16927# this termcap entry. This is because that key, on the Apple, transmits 16928# a ^U and would thus preempt the more useful "up" function of vi. 16929# 16930# HMH 2/23/81 16931apple80p|80-column apple with Pascal card, 16932 am, bw, 16933 cols#80, lines#24, 16934 clear=^Y^L, cuf1=^\\:, 16935 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16936 home=^Y, kcub1=^H, 16937# 16938# Apple II+ equipped with Videx 80 column card 16939# 16940# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; 16941# manually converted by D A Gwyn 16942# 16943# DO NOT use any terminal emulation with this data base, it works directly 16944# with the Videx card. This has been tested with vi 1200 baud and works fine. 16945# 16946# This works great for vi, except I've noticed in pre-R2, ^U will scroll back 16947# 1 screen, while in R2 ^U doesn't. 16948# For inverse alternate character set add: 16949# <smacs>=^O:<rmacs>=^N: 16950# (apple-v: added it#8 -- esr) 16951apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), 16952 am, xenl, 16953 cols#80, it#8, lines#24, 16954 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, 16955 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 16956 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, 16957 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 16958 khome=^Y, rmso=^Z2, smso=^Z3, 16959apple-videx3|vapple|Apple II with 80 col card, 16960 OTbs, am, 16961 cols#80, lines#24, 16962 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC, 16963 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex, 16964 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 16965 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#, 16966 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH, 16967#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL 16968aepro|Apple II+ running ASCII Express Pro--vt52, 16969 OTbs, 16970 cols#80, lines#24, 16971 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC, 16972 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 16973 el=\EK, home=\EH, 16974# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory 16975apple-vm80|ap-vm80|apple with viewmax-80, 16976 OTbs, 16977 cols#80, lines#24, 16978 clear=\014$<300/>, cuf1=^\\:, 16979 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, 16980 ed=\013$<300/>, el=^], home=\031$<200/>, 16981 16982#### Apple Lisa & Macintosh 16983# 16984 16985# (lisa: changed <cvvis> to <cnorm> -- esr) 16986lisa|apple lisa console display (black on white), 16987 OTbs, am, eo, msgr, 16988 cols#88, it#8, lines#32, 16989 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, 16990 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, 16991 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 16992 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 16993 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, 16994 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 16995 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, 16996liswb|apple lisa console display (white on black), 16997 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, 16998 smso=\E[m, smul=\E[4m, use=lisa, 16999 17000# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; 17001# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA> 17002# 17003# These entries assume that the 'Auto Wraparound' is enabled. 17004# Xon-Xoff flow control should also be enabled. 17005# 17006# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab 17007# settings are in non-volatile memory and don't need to be reset upon login. 17008# Also setting the number of columns glitches the screen annoyingly. 17009# You can type "reset" to get them set. 17010# 17011lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, 17012 OTbs, OTpt, am, xenl, xon, 17013 OTkn#4, cols#80, it#8, lines#24, vt#3, 17014 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 17015 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 17016 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 17017 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 17018 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, 17019 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, 17020 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, 17021 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17022 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, 17023 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 17024 tbc=\E[3g, 17025# Lisaterm in 132 column ("wide") mode. 17026lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, 17027 cols#132, 17028 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, 17029# Although MacTerminal has insert/delete line, it is commented out here 17030# since it is much faster and cleaner to use the "lock scrolling region" 17031# method of inserting and deleting lines due to the MacTerminal implementation. 17032# Also, the "Insert/delete ch" strings have an extra character appended to them 17033# due to a bug in MacTerminal V1.1. Blink is disabled since it is not 17034# supported by MacTerminal. 17035mac|macintosh|Macintosh with MacTerminal, 17036 xenl, 17037 OTdN#30, 17038 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, 17039# Lisaterm in 132 column ("wide") mode. 17040mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, 17041 cols#132, use=mac, 17042 17043# nsterm*|Apple_Terminal - AppKit Terminal.app 17044# 17045# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and 17046# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X 17047# Server and Mac OS X operating systems. There is also a 17048# "terminal.app" in GNUStep, but I believe it to be an unrelated 17049# codebase and I have not attempted to describe it here. 17050# 17051# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you 17052# are pretty much on your own. Use "nsterm-7-m" and hope for the best. 17053# You might also try "nsterm-7" and "nsterm-old" if you suspect your 17054# version supports color. 17055# 17056# To determine the version of Terminal.app you're using by running: 17057# 17058# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION" 17059# 17060# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm") 17061# 17062# For Apple_Terminal v71+/v100+, use "nsterm-bce". 17063# 17064# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s". 17065# 17066# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s". 17067# 17068# For all earlier versions (Apple_Terminal), try "nsterm-7-m" 17069# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s" 17070# might work too, but really you're on your own here since these 17071# systems are very obsolete and I can't test them. I do welcome 17072# patches, though :). 17073 17074# Other Terminals: 17075# 17076# For GNUstep_Terminal, you're probably best off using "linux" or 17077# writing your own terminfo. 17078 17079# For MacTelnet, you're on your own. It's a different codebase, and 17080# seems to be somewhere between "vt102", "ncsa" and "xterm-color". 17081 17082# For iTerm.app, see "iterm". 17083 17084# 17085# The AppKit Terminal.app descriptions all have names beginning with 17086# "nsterm". Note that the statusline (-s) versions use the window 17087# titlebar as a phony status line, and may produce warnings during 17088# compilation as a result ("tsl uses 0 parameters, expected 1".) 17089# Ignore these warnings, or even ignore these entries entirely. Apps 17090# which need to position the cursor or do other fancy stuff inside the 17091# status line won't work with these entries. They're primarily useful 17092# for programs like Pine which provide simple notifications in the 17093# status line. Please note that non-ASCII characters don't work right 17094# in the status line, since Terminal.app incorrectly interprets their 17095# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X 17096# versions) or only accepts status lines consisting entirely of 17097# characters from the first 256 Unicode positions (including C1 but 17098# not C0 or DEL.) 17099# 17100# The Mythology* of AppKit Terminal.app: 17101# 17102# In the days of NeXTSTep 0.x and 1.x there were two incompatible 17103# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a 17104# shareware replacement for Terminal called "Stuart" which NeXT bought 17105# and used as the basis for the Terminal.app in NeXTstep 2+, 17106# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I 17107# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or 17108# capabilities for the early versions, but I believe that the 17109# TERM_PROGRAM_VERSION may have been reset at some point. 17110# 17111# The early versions were tailored to the NeXT character set. Sometime 17112# after the Apple aquisition the encoding was swiched to MacRoman 17113# (initally with serious altcharset bugs due to incomplete conversion 17114# of the old NeXT code,) and then later to UTF-8. Alos sometime during 17115# or just prior to the early days of Mac OS X, the Terminal grew ANSI 17116# 8-color support (initially buggy when combined with attributes, but 17117# that was later fixed.) More recently, around Mac OS X version 10.3 17118# or so (Terminal.app v100+) xterm-like 16-color support was added. In 17119# some versions (for instance 133-1 which shipped with Mac OS X 17120# version 10.4) this suffered from the <bce> bug, but that seems to 17121# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+). 17122# 17123# In the early days of Mac OS X the terminal was fairly buggy and 17124# would routinely crash under load. Many of these bugs seem to have 17125# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but 17126# some may still remain. This change seems to correspond to 17127# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as 17128# it did previously. 17129# 17130# * This may correspond with what actually happened, but I don't 17131# know. It is based on guesswork, hearsay, private correspondence, 17132# my faulty memory, and the following online sources and references: 17133# 17134# [1] "Three Scotts and a Duane" by Simson L. Garfinkel 17135# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html 17136# 17137# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia 17138# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep 17139# 17140# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to 17141# "nsterm" to comply with the name length and case conventions and 17142# limitations of various software packages [notably Solaris terminfo 17143# and UNIX.] A single Apple_Terminal alias is retained for 17144# backwards-compatbility. 17145# 17146# * Added function key support (F1-F4). These only work in Terminal.app 17147# version 51, hopefully the capabilities won't cause problems for people 17148# using version 41. 17149# 17150# * Added "full color" (-c) entries which support the 16-color mode in 17151# version 51. 17152# 17153# * By default, version 51 uses UTF-8 encoding with broken altcharset 17154# support, so "ASCII" (-7) entries without altcharset support were 17155# added. 17156 17157# nsterm - AppKit Terminal.app 17158# 17159# Apple's Mac OS X includes a Terminal.app derived from the old NeXT 17160# Terminal.app. It is a partial VT100 emulation with some xterm-like 17161# extensions. This terminfo was written to describe versions 41 17162# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X 17163# version 10.1) of Terminal.app. 17164# 17165# Terminal.app runs under the Mac OS X Quartz windowing system (and 17166# other AppKit-supported windowing systems.) On the Mac OS X machine I 17167# use, the executable for Terminal.app is: 17168# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal 17169# 17170# If you're looking for a description of the full-screen system 17171# console which runs under Apple's Darwin operating system on PowerPC 17172# platforms, see the "xnuppc" entry instead. 17173# 17174# There were no function keys in version 41. In version 51, there are 17175# four working function keys (F1, F2, F3 and F4.) The function keys 17176# are included in all of these entries. 17177# 17178# It does not support mouse pointer position reporting. Under some 17179# circumstances the cursor can be positioned using option-click; this 17180# works by comparing the cursor position and the selected position, 17181# and simulating enough cursor-key presses to move the cursor to the 17182# selected position. This technique fails in all but the simplest 17183# applications. 17184# 17185# It provides partial ANSI color support (background colors interacted 17186# badly with bold in version 41, though, as reflected in :ncv:.) The 17187# monochrome (-m) entries are useful if you've disabled color support 17188# or use a monochrome monitor. The full color (-c) entries are useful 17189# in version 51, which doesn't exhibit the background color bug. They 17190# also enable an xterm-compatible 16-color mode. 17191# 17192# The configurable titlebar is set using xterm-compatible sequences; 17193# it is used as a status bar in the statusline (-s) entries. Its width 17194# depends on font sizes and window sizes, but 50 characters seems to 17195# be the default for an 80x24 window. 17196# 17197# The MacRoman character encoding is used for some of the alternate 17198# characters in the "MacRoman" entries; the "ASCII" (-7) entries 17199# disable alternate character set support entirely, and the "VT100" 17200# (-acs) entries rely instead on Terminal.app's own buggy VT100 17201# graphics emulation, which seems to think the character encoding is 17202# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries 17203# are useful in Terminal.app version 51, which supports UTF-8 and 17204# other ASCII-compatible character encodings but does not correctly 17205# implement VT100 graphics; once VT100 graphics are correctly 17206# implemented in Terminal.app, the "VT100" (-acs) entries should be 17207# usable in any ASCII-compatible character encoding [except perhaps 17208# in UTF-8, where some experts argue for disallowing alternate 17209# characters entirely.] 17210# 17211# Terminal.app reports "vt100" as the terminal type, but exports 17212# several environment variables which may aid detection in a shell 17213# profile (i.e. .profile or .login): 17214# 17215# TERM=vt100 17216# TERM_PROGRAM=Apple_Terminal 17217# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 17218# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 17219# 17220# For example, the following Bourne shell script would detect the 17221# correct terminal type: 17222# 17223# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] 17224# then 17225# export TERM 17226# if [ :"$TERM_PROGRAM_VERSION" = :41 ] 17227# then 17228# TERM="nsterm-old" 17229# else 17230# TERM="nsterm-c-7" 17231# fi 17232# fi 17233# 17234# In a C shell derivative, this would be accomplished by: 17235# 17236# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then 17237# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then 17238# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then 17239# setenv TERM "nsterm-old" 17240# else 17241# setenv TERM "nsterm-c-7" 17242# endif 17243# endif 17244# endif 17245 17246# The '+' entries are building blocks 17247nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, 17248 am, bw, msgr, xenl, xon, 17249 cols#80, it#8, lines#24, 17250 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 17251 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 17252 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 17253 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 17254 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 17255 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 17256 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 17257 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, 17258 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17259 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 17260 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 17261 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 17262 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, 17263 17264nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, 17265 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17266 enacs=\E(B\E)0, rmacs=^O, 17267 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 17268 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 17269 17270nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, 17271 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245, 17272 enacs=\E(B\E)0, rmacs=^O, 17273 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 17274 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 17275 17276nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, 17277 hs, 17278 wsl#50, 17279 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, 17280 17281nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), 17282 op=\E[0m, use=ibm+16color, 17283 17284nsterm+c41|AppKit Terminal.app v41 color support, 17285 colors#8, ncv#37, pairs#64, 17286 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 17287 17288# These are different combinations of the building blocks 17289 17290# ASCII charset (-7) 17291nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), 17292 use=nsterm+7, 17293 17294nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), 17295 use=nsterm+s, use=nsterm+7, 17296 17297nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), 17298 use=nsterm+c41, use=nsterm+7, 17299 17300nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), 17301 use=nsterm+c, use=nsterm+7, 17302 17303nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), 17304 use=nsterm+s, use=nsterm+c41, use=nsterm+7, 17305 17306nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), 17307 use=nsterm+s, use=nsterm+c, use=nsterm+7, 17308 17309# VT100 alternate-charset (-acs) 17310nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), 17311 use=nsterm+acs, 17312 17313nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), 17314 use=nsterm+s, use=nsterm+acs, 17315 17316nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), 17317 use=nsterm+c41, use=nsterm+acs, 17318 17319nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), 17320 use=nsterm+c, use=nsterm+acs, 17321 17322nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), 17323 use=nsterm+s, use=nsterm+c41, use=nsterm+acs, 17324 17325nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), 17326 use=nsterm+s, use=nsterm+c, use=nsterm+acs, 17327 17328# MacRoman charset 17329nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), 17330 use=nsterm+mac, 17331 17332nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), 17333 use=nsterm+s, use=nsterm+mac, 17334 17335nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color), 17336 use=nsterm+c41, use=nsterm+mac, 17337 17338nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), 17339 use=nsterm+c, use=nsterm+mac, 17340 17341nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), 17342 use=nsterm+s, use=nsterm+c41, use=nsterm+mac, 17343 17344nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), 17345 use=nsterm+s, use=nsterm+c, use=nsterm+mac, 17346 17347# In Mac OS X version 10.5 the format of the preferences has changed 17348# and a new, more complex technique is needed, e.g., 17349# 17350# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass( 17351# "NSUserDefaults");ud=NSUserDefaults.alloc(); 17352# ud.init();prefs=ud.persistentDomainForName_( 17353# "com.apple.Terminal");prefs["Window Settings"][ 17354# prefs["Default Window Settings"]]["TerminalType" 17355# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs, 17356# "com.apple.Terminal")' nsterm-16color 17357# 17358# and it is still not settable from the preferences dialog. This is 17359# tracked under rdar://problem/7365108 and rdar://problem/7365134 17360# in Apple's bug reporter. 17361nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5, 17362 bw@, mir, npc, 17363 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, 17364 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, 17365 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F, 17366 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 17367 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 17368 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~, 17369 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 17370 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 17371 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd, 17372 use=nsterm-c-s-acs, 17373 17374# The versions of Terminal.app in Mac OS X version 10.3.x seem to have 17375# the background color erase bug. The newer version 240.2 in Mac OS X 17376# version 10.5 does not. 17377# 17378# This entry is based on newsgroup comments by Alain Bench, Christian Ebert, 17379# and D P Schreber comparing to nsterm-c-s-acs. 17380# 17381# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM 17382# can be set in Terminal.app, e.g., 17383# 17384# defaults write com.apple.Terminal TermCapString nsterm-bce 17385# 17386# and that it is not set in Terminal's preferences dialog. 17387nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce), 17388 bce, bw, use=nsterm-16color, 17389 17390# This is an alias which should always point to the "current" version 17391nsterm|Apple_Terminal|AppKit Terminal.app, 17392 use=nsterm-16color, 17393 17394# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and 17395# more featureful) terminal emulator for Mac OS X. It is similar 17396# enough in capabilities to nsterm-16color that I have derived this 17397# description from that one, but as far as I know they share no code. 17398# Many of the features are user-configurable, but I attempt only to 17399# describe the default configuration. 17400# 17401# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is 17402# disabled. 17403iTerm.app|iTerm.app terminal emulator for Mac OS X, 17404 bce, bw@, ccc@, 17405 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color, 17406 use=nsterm-16color, 17407 17408# xnuppc - Darwin PowerPC Console (a.k.a. "darwin") 17409# 17410# On PowerPC platforms, Apple's Darwin operating system uses a 17411# full-screen system console derived from a NetBSD framebuffer 17412# console. It is an ANSI-style terminal, and is not really VT-100 17413# compatible. 17414# 17415# Under Mac OS X, this is the system console driver used while in 17416# single-user mode [reachable by holding down Command-S during the 17417# boot process] and when logged in using console mode [reachable by 17418# typing ">console" at the graphical login prompt.] 17419# 17420# If you're looking for a description of the Terminal.app terminal 17421# emulator which runs under the Mac OS X Quartz windowing system (and 17422# other AppKit-supported windowing systems,) see the "nsterm" 17423# entry instead. 17424# 17425# NOTE: Under Mac OS X version 10.1, the default login window does not 17426# prompt for user name, instead requiring an icon to be selected from 17427# a list of known users. Since the special ">console" login is not in 17428# this list, you must make one of two changes in the Login Window 17429# panel of the Login section of System Prefs to make the special 17430# ">console" login accessible. The first option is to enable 'Show 17431# "Other User" in list for network users', which will add a special 17432# "Other..." icon to the graphical login panel. Selecting "Other..." 17433# will present the regular graphical login prompt. The second option 17434# is to change the 'Display Login Window as:' setting to 'Name and 17435# password entry fields', which replaces the login panel with a 17436# graphical login prompt. 17437# 17438# There are no function keys, at least not in Darwin 1.3. 17439# 17440# It has no mouse support. 17441# 17442# It has full ANSI color support, and color combines correctly with 17443# all three supported attributes: bold, inverse-video and underline. 17444# However, bold colored text is almost unreadable (bolding is 17445# accomplished using shifting and or-ing, and looks smeared) so bold 17446# has been excluded from the list of color-compatible attributes 17447# [using (ncv)]. The monochrome entry (-m) is useful if you use a 17448# monochrome monitor. 17449# 17450# There is one serious bug with this terminal emulation's color 17451# support: repositioning the cursor onto a cell with non-matching 17452# colors obliterates that cell's contents, replacing it with a blank 17453# and displaying a colored cursor in the "current" colors. There is 17454# no complete workaround at present [other than using the monochrome 17455# (-m) entries,] but removing the (msgr) capability seemed to help. 17456# 17457# The "standout" chosen was simple reverse-video, although a colorful 17458# standout might be more aesthetically pleasing. Similarly, the bold 17459# chosen is the terminal's own smeared bold, although a simple 17460# color-change might be more readable. The color-bold (-b) entries 17461# uses magenta colored text for bolding instead. The fancy color (-f 17462# and -f2) entries use color for bold, standout and underlined text 17463# (underlined text is still underlined, though.) 17464# 17465# Apparently the terminal emulator does support a VT-100-style 17466# alternate character set, but all the alternate character set 17467# positions have been left blank in the font. For this reason, no 17468# alternate character set capabilities have been included in this 17469# description. The console driver appears to be ASCII-only, so (enacs) 17470# has been excluded [although the VT-100 sequence does work.] 17471# 17472# The default Mac OS X and Darwin installation reports "vt100" as the 17473# terminal type, and exports no helpful environment variables. To fix 17474# this, change the "console" entry in /etc/ttys from "vt100" to 17475# "xnuppc-WxH", where W and H are the character dimensions of your 17476# console (see below.) 17477# 17478# The font used by the terminal emulator is apparently one originally 17479# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This 17480# file includes descriptions for the following geometries: 17481# 17482# Pixels Characters Entry Name (append -m for monochrome) 17483# ------------------------------------------------------------------- 17484# 640x400 80x25 xnuppc-80x25 17485# 640x480 80x30 xnuppc-80x30 17486# 720x480 90x30 xnuppc-90x30 17487# 800x600 100x37 xnuppc-100x37 17488# 896x600 112x37 xnuppc-112x37 17489# 1024x640 128x40 xnuppc-128x40 17490# 1024x768 128x48 xnuppc-128x48 17491# 1152x768 144x48 xnuppc-144x48 17492# 1280x1024 160x64 xnuppc-160x64 17493# 1600x1024 200x64 xnuppc-200x64 17494# 1600x1200 200x75 xnuppc-200x75 17495# 2048x1536 256x96 xnuppc-256x96 17496# 17497# The basic "xnuppc" entry includes no size information, and the 17498# emulator includes no reporting capability, so you'll be at the mercy 17499# of the TTY device (which reports incorrectly on my hardware.) The 17500# color-bold entries do not include size information. 17501 17502# The '+' entries are building blocks 17503xnuppc+basic|Darwin PowerPC Console basic capabilities, 17504 am, bce, mir, xenl, 17505 it#8, 17506 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 17507 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 17508 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17509 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, 17510 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177, 17511 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 17512 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, 17513 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 17514 sc=\E7, 17515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 17516 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 17517 smul=\E[4m, tbc=\E[3g, use=vt100+keypad, 17518 17519xnuppc+c|Darwin PowerPC Console ANSI color support, 17520 colors#8, ncv#32, pairs#64, 17521 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 17522 17523xnuppc+b|Darwin PowerPC Console color-bold support, 17524 ncv#32, 17525 bold=\E[35m, 17526 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 17527 use=xnuppc+basic, 17528 17529xnuppc+f|Darwin PowerPC Console fancy color support, 17530 ncv#35, 17531 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m, 17532 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, 17533 17534xnuppc+f2|Darwin PowerPC Console alternate fancy color support, 17535 ncv#35, 17536 bold=\E[33m, 17537 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, 17538 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, 17539 17540# Building blocks for specific screen sizes 17541xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels), 17542 cols#80, lines#25, 17543 17544xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels), 17545 cols#80, lines#30, 17546 17547xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels), 17548 cols#90, lines#30, 17549 17550xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels), 17551 cols#100, lines#37, 17552 17553xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels), 17554 cols#112, lines#37, 17555 17556xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels), 17557 cols#128, lines#40, 17558 17559xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels), 17560 cols#128, lines#48, 17561 17562xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels), 17563 cols#144, lines#48, 17564 17565xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels), 17566 cols#160, lines#64, 17567 17568xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels), 17569 cols#200, lines#64, 17570 17571xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels), 17572 cols#200, lines#75, 17573 17574xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels), 17575 cols#256, lines#96, 17576 17577# These are different combinations of the building blocks 17578 17579xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome), 17580 use=xnuppc+basic, 17581 17582xnuppc|darwin|Darwin PowerPC Console (color), 17583 use=xnuppc+c, use=xnuppc+basic, 17584 17585xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold), 17586 use=xnuppc+b, 17587 17588xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold), 17589 use=xnuppc+b, use=xnuppc+c, 17590 17591xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome), 17592 use=xnuppc+f, 17593 17594xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color), 17595 use=xnuppc+f, use=xnuppc+c, 17596 17597xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome), 17598 use=xnuppc+f2, 17599 17600xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color), 17601 use=xnuppc+f2, use=xnuppc+c, 17602 17603# Combinations for specific screen sizes 17604xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25, 17605 use=xnuppc+80x25, use=xnuppc+basic, 17606 17607xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25, 17608 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, 17609 17610xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30, 17611 use=xnuppc+80x30, use=xnuppc+basic, 17612 17613xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30, 17614 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, 17615 17616xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30, 17617 use=xnuppc+90x30, use=xnuppc+basic, 17618 17619xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30, 17620 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, 17621 17622xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37, 17623 use=xnuppc+100x37, use=xnuppc+basic, 17624 17625xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37, 17626 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, 17627 17628xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37, 17629 use=xnuppc+112x37, use=xnuppc+basic, 17630 17631xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37, 17632 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, 17633 17634xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40, 17635 use=xnuppc+128x40, use=xnuppc+basic, 17636 17637xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40, 17638 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, 17639 17640xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48, 17641 use=xnuppc+128x48, use=xnuppc+basic, 17642 17643xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48, 17644 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, 17645 17646xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48, 17647 use=xnuppc+144x48, use=xnuppc+basic, 17648 17649xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48, 17650 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, 17651 17652xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64, 17653 use=xnuppc+160x64, use=xnuppc+basic, 17654 17655xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64, 17656 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, 17657 17658xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64, 17659 use=xnuppc+200x64, use=xnuppc+basic, 17660 17661xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64, 17662 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, 17663 17664xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75, 17665 use=xnuppc+200x75, use=xnuppc+basic, 17666 17667xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75, 17668 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, 17669 17670xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96, 17671 use=xnuppc+256x96, use=xnuppc+basic, 17672 17673xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96, 17674 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, 17675 17676#### Radio Shack/Tandy 17677# 17678 17679# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". 17680# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) 17681# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 17682coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, 17683 OTbs, am, 17684 cols#80, it#8, lines#24, 17685 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s, 17686 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, 17687 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, 17688 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J, 17689 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, 17690 sgr0=\037!\E\:\0, smso=^_\s, smul=^_", 17691# (trs2: removed obsolete ":nl=^_:" -- esr) 17692trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, 17693 OTbs, am, msgr, 17694 cols#80, it#8, lines#24, 17695 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], 17696 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, 17697 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\, 17698 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, 17699# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu> 17700# (This had extension capabilities 17701# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ 17702# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: 17703# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) 17704trs16|trs-80 model 16 console, 17705 OTbs, am, 17706 cols#80, it#8, lines#24, 17707 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, 17708 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 17709 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 17710 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 17711 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17712 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, 17713 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, 17714 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, 17715 smacs=\ERG, smso=\ERD, 17716 17717#### Commodore Business Machines 17718# 17719# Formerly located in West Chester, PA; went spectacularly bust in 1994 17720# after years of shaky engineering and egregious mismanagement. Made one 17721# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, 17722# C-128, VIC-20). The C-64 is said to have been the most popular machine 17723# ever (most units sold); they can still be found gathering dust in closets 17724# everywhere. 17725# 17726 17727# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 17728# Added a few more entries, converted caret-type control sequence (^x) entries 17729# to '\0xx' entries since a couple of people mentioned losing '^x' sequences. 17730# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998 17731# 17732# :as:, :ae: Support for alternate character sets. 17733# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. 17734# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) 17735# This one appears to fix a problem I always had with a line ending 17736# at 'width+1' (I think) followed by a blank line in vi. The blank 17737# line tended to disappear and reappear depending on how the screen 17738# was refreshed. Note that this is probably needed only if you use 17739# something like a Dnet Fterm with the window sized to some peculiar 17740# dimension larger than 80 columns. 17741# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' 17742# (amiga: removed obsolete :kn#10:, 17743# also added empty <acsc> to suppress a warning --esr) 17744amiga|Amiga ANSI, 17745 OTbs, am, bw, xenl, 17746 cols#80, lines#24, 17747 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, 17748 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, 17749 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 17750 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 17751 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 17752 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 17753 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 17754 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, 17755 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, 17756 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, 17757 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m, 17758 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m, 17759 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 17760 17761# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995 17762# (amiga: added empty <acsc> to suppress a warning. 17763# I'm told this entry screws up badly with AS225, the Amiga 17764# TCP/IP package once from Commodore, and now sold by InterWorks.--esr) 17765amiga-h|Hans Verkuil's Amiga ANSI, 17766 OTbs, bw, msgr, 17767 cols#80, lines#24, 17768 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, 17769 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M, 17770 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 17771 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 17772 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 17773 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, 17774 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, 17775 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, 17776 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 17777 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, 17778 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, 17779 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, 17780 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, 17781 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, 17782 smso=\2337m, smul=\2334m, 17783 17784# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999 17785# 17786# Pavel Fedin added 17787# Home Shift+Left 17788# End Shift+Right 17789# PgUp Shift+Up 17790# PgDn Shift+Down 17791amiga-8bit|Amiga ANSI using 8-bit controls, 17792 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 17793 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S, 17794 kpp=\233T, ri=\215, rin@, use=amiga-h, 17795 17796# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000 17797# requires use of appropriate preferences settings. 17798amiga-vnc|Amiga using VNC console (black on light gray), 17799 am, da, db, msgr, ndscr, 17800 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256, 17801 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p, 17802 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M, 17803 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 17804 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 17805 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 17806 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 17807 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, 17808 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 17809 indn=\E[%p1%dS, invis=\E8m, 17810 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 17811 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 17812 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, 17813 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, 17814 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~, 17815 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m, 17816 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J, 17817 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec, 17818 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 17819 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m, 17820 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m, 17821 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h, 17822 smso=\E[1m, smul=\E[4m, 17823 17824# MorphOS on Genesi Pegasos 17825# By Pavel Fedin <sonic_amiga@rambler.ru> 17826morphos, 17827 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 17828 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~, 17829 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~, 17830 ri=\215, rin@, use=amiga-h, 17831 17832# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA> 17833# I'm trying to write a termcap for a commodore b-128, and I'm 17834# having a little trouble. I've had to map most of my control characters 17835# to something that unix will accept (my delete-char is a ctrl-t, etc), 17836# and create some functions (like cm), but thats life. 17837# The problem is with the arrow keys - right, and up work fine, but 17838# left deletes the previous character and down I just can't figure out. 17839# Jove knows what I want, but I don't know what it's sending to me (it 17840# isn't thats bound to next-line in jove). 17841# Anybody got any ideas? Here's my termcap. 17842# DAG -- I changed his "^n" entries to "\n"; see if that works. 17843# 17844commodore|b-128|Commodore B-128 micro, 17845 am, bw, 17846 OTdN#20, cols#80, lines#24, pb#150, 17847 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J, 17848 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, 17849 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, 17850 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, 17851 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, 17852 smir=, 17853 17854#### North Star 17855# 17856# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL 17857northstar|North Star Advantage, 17858 OTbs, 17859 cols#80, lines#24, 17860 clear=\004$<200/>, 17861 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, 17862 el=\016$<200/>, home=\034\032$<200/>, 17863 17864#### Osborne 17865# 17866# Thu Jul 7 03:55:16 1983 17867# 17868# As an aside, be careful; it may sound like an anomaly on the 17869# Osborne, but with the 80-column upgrade, it's too easy to 17870# enter lines >80 columns! 17871# 17872# I've already had several comments... 17873# The Osborne-1 with the 80-col option is capable of being 17874# 52, 80, or 104 characters wide; default to 80 for compatibility 17875# with most systems. 17876# 17877# The tab is destructive on the Ozzie; make sure to 'stty -tabs'. 17878osborne-w|osborne1-w|osborne I in 104-column mode, 17879 msgr, ul, xt, 17880 cols#104, lines#24, 17881 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17882 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 17883 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, 17884 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, 17885# Osborne I from ptsfa!rhc (Robert Cohen) via BRL 17886osborne|osborne1|osborne I in 80-column mode, 17887 OTbs, am, mir, msgr, ul, xhp, 17888 OTdB#4, cols#80, lines#24, 17889 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, 17890 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 17891 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, 17892 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), 17893 rmul=\Em, smir=\EQ, smso=\E(, smul=\El, 17894# 17895# Osborne Executive definition from BRL 17896# Similar to tvi920 17897# Added by David Milligan and Tom Smith (SMU) 17898osexec|Osborne executive, 17899 OTbs, am, 17900 OTug#1, cols#80, lines#24, xmc#1, 17901 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17902 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 17903 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 17904 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 17905 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 17906 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 17907 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, 17908 smul=\El, tbc=\E3, 17909 17910#### Console types for obsolete UNIX clones 17911# 17912# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 17913# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix 17914# were commercial, Minix an educational tool sold in conjunction with a book. 17915# Memory-segmentation limits and a strong tendency to look like V7 long after 17916# it was obsolete made all three pretty lame. Venix croaked early. Coherent 17917# and Minix were ported to 32-bit Intel boxes, only to be run over by a 17918# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). 17919# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There 17920# are also, I'm told, Minix ports that ran on Amiga and Atari machines and 17921# even as single processes under SunOS and the Macintosh OS. 17922# 17923 17924# See 17925# http://www.minix3.org/manpages/man4/console.4.html 17926minix|minix console (v3), 17927 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 17928 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 17929 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~, 17930 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~, 17931 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~, 17932 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~, 17933 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~, 17934 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~, 17935 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~, 17936 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~, 17937 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~, 17938 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~, 17939 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 17940 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@, 17941 use=minix-3.0, 17942 17943minix-3.0|minix console (v3.0), 17944 use=ecma+color, use=minix-1.7, 17945 17946# See 17947# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html 17948# This is the entry provided with minix 1.7.4, with bogus :ri: removed. 17949minix-1.7|minix console (v1.7), 17950 am, xenl, 17951 cols#80, it#8, lines#25, 17952 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 17953 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 17954 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17955 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 17956 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K, 17957 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 17958 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 17959 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, 17960 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, 17961 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J, 17962 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, 17963 smso=\E[7m, smul=\E[4m, 17964# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil> 17965minix-old|minix-1.5|minix console (v1.5), 17966 xon, 17967 cols#80, it#8, lines#25, 17968 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 17969 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 17970 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17971 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 17972 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 17973 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 17974 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 17975 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, 17976 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, 17977 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 17978# The linewrap option can be specified by editing /usr/include/minix/config.h 17979# before recompiling the minix 1.5 kernel. 17980minix-old-am|minix console with linewrap, 17981 am, use=minix-old, 17982 17983pc-minix|minix console on an Intel box, 17984 use=klone+acs, use=minix-3.0, 17985 17986# According to the Coherent 2.3 manual, the PC console is similar 17987# to a z19. The differences seem to be (1) 25 lines, (2) no status 17988# line, (3) standout is broken, (4) ins/del line is broken, (5) 17989# has blinking and bold. 17990pc-coherent|pcz19|coherent|IBM PC console running Coherent, 17991 am, mir, 17992 cols#80, it#8, lines#25, 17993 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 17994 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, 17995 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, 17996 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, 17997 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, 17998 17999# According to the Venix 1.1 manual, the PC console is similar 18000# to a DEC vt52. Differences seem to be (1) arrow keys send 18001# different strings, (2) enhanced standout, (3) added insert/delete line. 18002# Note in particular that it doesn't have automatic margins. 18003# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they 18004# not described here because this derives from an old termcap entry. 18005pc-venix|venix|IBM PC console running Venix, 18006 cols#80, it#8, lines#25, 18007 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18008 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 18009 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK, 18010 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, 18011 18012#### Miscellaneous microcomputer consoles 18013# 18014# If you know anything more about any of these, please tell me. 18015# 18016 18017# The MAI Basic Four computer was obsolete at the end of the 1980s. 18018# It may be used as a terminal by putting it in "line" mode as seen on 18019# one of the status lines. 18020# Initialization is similar to CIT80. <is2> will set ANSI mode for you. 18021# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so 18022# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I 18023# used \ED instead. 18024# From: bf347@lafn.org (David Lawyer), 28 Jun 1997 18025mai|basic4|MAI Basic Four in ansi mode, 18026 am, da, db, mir, msgr, 18027 cols#82, it#8, lines#25, 18028 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, 18029 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, 18030 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, 18031 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, 18032 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED, 18033 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, 18034 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 18035 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 18036 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, 18037 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 18038 smir=\E[4h, smso=\E[7m, smul=\E[4m, 18039# basis from Peter Harrison, Computer Graphics Lab, San Francisco 18040# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA 18041# 18042# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote: 18043# The Basis 108 was a Apple II clone, manufactured by the "Basis 18044# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, 18045# about 1,5 km from where I live, but doesn't build own computers any 18046# more). A Basis 108 featured a really heavy (cast aluminium?) case, was 18047# equipped with one or two 5.25" disk drives, had a monochrome and colour 18048# video output for a TV set or a dedicated monitor and several slots for 18049# Apple II cards. Basis 108 were quite popular at german schools before 18050# the advent of the IBM PC. They run, for example, the UCSD Pascal 18051# development system (which I used even in 1993 to program the steering 18052# and data recording for our school's experimental solar panel :), Apple DOS 18053# or CP/M. 18054# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) 18055basis|BASIS108 computer with terminal translation table active, 18056 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, 18057 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), 18058 smso=\E(, use=adm3a, 18059# luna's BMC terminal emulator 18060luna|luna68k|LUNA68K Bitmap console, 18061 cols#88, lines#46, use=ansi-mini, 18062megatek|pegasus workstation terminal emulator, 18063 am, os, 18064 cols#83, lines#60, 18065# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived 18066# interface (pre-Macintosh by several years) that went nowhere. 18067xerox820|x820|Xerox 820, 18068 am, 18069 cols#80, lines#24, 18070 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 18071 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, 18072 home=^^, ind=^J, 18073 18074#### Videotex and teletext 18075# 18076 18077# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) 18078# \E[?3l 80 columns 18079# \E[?4l scrolling on 18080# \E[12h local echo off 18081# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen 18082# \E)0 G1 DEC set (line graphics) 18083# 18084# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997 18085m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, 18086 OTbs, eslok, hs, xenl, 18087 cols#80, it#8, lines#24, wsl#72, xmc#0, 18088 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, 18089 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, 18090 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr, 18091 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 18092 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18093 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18094 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J, 18095 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>, 18096 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, 18097 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 18098 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, 18099 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, 18100 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, 18101 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, 18102 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 18103 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 18104 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, 18105 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, 18106 u6=\E[%i%d;%dR, u7=\E[6n, 18107 18108# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998 18109# 18110minitel1|minitel 1, 18111 am, bw, eslok, hs, hz, msgr, 18112 colors#8, cols#40, lines#24, pairs#8, 18113 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L, 18114 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 18115 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X, 18116 enacs=^Y, fsl=^J, home=^^, ind=^J, 18117 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG, 18118 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\, 18119 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;, 18120 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, 18121 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c, 18122# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON. 18123minitel1b|minitel 1-bistandard (in 40cols mode), 18124 mir, 18125 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 18126 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 18127 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, 18128 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D, 18129 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 18130 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l, 18131 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1, 18132# <rmkx> posait des problemes (logout en sortant de vi). 18133minitel1b-80|minitel 1-bistandard (standard teleinformatique), 18134 am@, bw@, hz@, 18135 colors@, cols#80, it#8, pairs@, 18136 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, 18137 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C, 18138 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 18139 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq, 18140 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, 18141 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m, 18142 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@, 18143 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 18144 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b, 18145 18146######## OBSOLETE VDT TYPES 18147# 18148# These terminals are *long* dead -- these entries are retained for 18149# historical interest only. 18150 18151#### Amtek Business Machines 18152# 18153 18154# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", 18155# but these caps were commented out in 8.3; also, removed overridden 18156# ":do=^J:" -- esr) 18157abm80|amtek business machines 80, 18158 OTbs, am, bw, 18159 cols#80, lines#24, 18160 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, 18161 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, 18162 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, 18163 18164#### Bell Labs blit terminals 18165# 18166# These were AT&T's official entries. The 5620 FAQ maintained by 18167# David Breneman <daveb@dgtl.com> has this to say: 18168# 18169# Actually, in the beginning was the Jerq, and the Jerq was white with a 18170# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq 18171# was good. But lo, upon the horizon loomed a mighty management-type person 18172# (known now only by the initials VP) who said, the mighty Jerq must stay 18173# alone, and could not go forth into the world. So Locanthi and Pike put the 18174# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the 18175# world. And the Jerq lived the rest of its days in research, but never 18176# strayed from those paths. 18177# 18178# In all seriousness, the Blit was originally known as the Jerq, but when 18179# it started to be shown outside of the halls of the Bell Labs Research 18180# organization, the management powers that be decided that the name could 18181# not remain. So it was renamed to be Blit. This was in late 1981. 18182# 18183# (The AT&T 5620 was the commercialized Blit. Its successors were the 630, 18184# 730, and 730+.) 18185# 18186 18187blit|jerq|blit running teletype rom, 18188 am, eo, ul, xon, 18189 cols#87, it#8, lines#72, 18190 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 18191 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 18192 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, 18193 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, 18194 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED, 18195 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, 18196 18197# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr) 18198cbblit|fixterm|blit running columbus code, 18199 cols#88, 18200 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, 18201 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, 18202 smul=\EU", use=blit, 18203 18204oblit|ojerq|first version of blit rom, 18205 am, da, db, eo, mir, ul, xon, 18206 cols#88, it#8, lines#72, 18207 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 18208 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, 18209 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, 18210 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER, 18211 smir=\EQ, 18212 18213#### Bolt, Beranek & Newman (bbn) 18214# 18215# The BitGraph was a product of the now-defunct BBN Computer Corporation. 18216# The parent company, best known as the architects of the Internet, is 18217# still around. 18218# 18219# Jeff DelPapa <dp@world.std.com> writes: 18220# The bitgraph was a large white box that contained a monochrome bitmap 18221# display, and a 68000 to run it. You could download code and run it on 18222# the cpu, it had 128kb (I think) of memory. I used one in the late 18223# 70's, sure beat a vt100. It had one strange feature tho -- it used 18224# the cpu to bitblt pixels to scroll, it took longer than the refresh 18225# rate, and looked like a rubber sheet stretching, then snapping 18226# upwards. It had everything the early mac had, except a floppy drive a 18227# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt 18228# Beranek and Neuman) sold at most a few hundred of them to the real 18229# world. DOD may have bought more... 18230# 18231 18232# Entries for the BitGraph terminals. The problem 18233# with scrolling in vi can only be fixed by getting BBN to put 18234# smarter scroll logic in the terminal or changing vi or padding 18235# scrolls with about 500 ms delay. 18236# 18237# I always thought the problem was related to the terminal 18238# counting newlines in its input buffer before scrolling and 18239# then moving the screen that much. Then vi comes along and 18240# paints lines in on the bottom line of the screen, so you get 18241# this big white gap. 18242 18243bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video), 18244 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 18245 use=bg2.0, 18246bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video), 18247 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 18248 use=bg2.0, 18249bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init), 18250 OTbs, xenl, 18251 cols#85, lines#64, 18252 bel=^G, clear=\E[H\E[J$<150>, cr=^M, 18253 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 18254 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, 18255 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, 18256 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 18257 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, 18258 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, 18259 sgr0=\E[m, smkx=\E=, smso=\E[7m, 18260 18261bg1.25rv|bbn bitgraph 1.25 (reverse video), 18262 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 18263 use=bg1.25, 18264bg1.25nv|bbn bitgraph 1.25 (normal video), 18265 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 18266 use=bg1.25, 18267# (bg1.25: I added <rmam>/<smam> based on the init string -- esr) 18268bg1.25|bbn bitgraph 1.25, 18269 cols#85, lines#64, 18270 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B, 18271 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, 18272 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, 18273 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, 18274 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, 18275 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, 18276 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, 18277 smso=\E[7m, 18278 18279#### Bull (bq, dku, vip) 18280# 18281# (Adapted for terminfo; AIX extension capabilities translated -- esr) 18282 18283#============================================# 18284# BULL QUESTAR 210 `SDP' terminals emulation # 18285#============================================# 18286# 18287# Description written by R.K.Saunders (Bull Transac) 18288# 18289# Modifications written by F. Girard (Bull MTS) 18290# 19-05-87 V02.00.01 18291# 17-12-87 V02.00.02 18292# 15-09-89 V02.00.05 18293# 18294# Typical technical selections F1 (modes SDP/ROLL): 18295# ------------------------------------------------------- 18296# | 01 02 03 04 05 06 07 08 09 10 | 18297# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | 18298# | | 18299# | 11 12 13 14 15 16 17 18 19 20 | 18300# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | 18301# | | 18302# | 21 22 23 24 25 26 27 28 29 30 | 18303# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | 18304# | | 18305# | 31 32 33 34 35 36 37 38 39 40 | 18306# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | 18307# ------------------------------------------------------- 18308# Typical firmware identification F5 "etat 6": 18309# P287.02.04b (AZERTY) 18310# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) 18311# P298.03.03 (monochrome) or P374.03.02 (colour) 18312# 18313# SM SDP mode (VIP command): ^[[?=h 18314# RIS (erases screen): ^[c 18315# DMI disable keyboard: ^[` 18316# SM double rendition mode: ^[[?>h 18317# RM solicited status mode: ^[[5l 18318# RM character mode: ^[[>l 18319# RM echoplex mode: ^[[12l 18320# RM column tab mode: ^[[18l 18321# RM forbid SS2 keyboard mode: ^[[?<l 18322# SM scroll mode: ^[[=h 18323# FCF enable XON/XOFF: ^[P1s^[\ 18324# MTL select end msg character: ^[[^Wp 18325# EMI enable keyboard: ^[b 18326# RIS retour etat initial: ^[c 18327# enable FC keypad: ^[[?<h, 18328# MPW map status line window: ^[PY99:98^[\ 18329# SCP select status line: ^[[0;98v 18330# ED erase entire partition: ^[[2J 18331# SCP select main partition: ^[[v 18332# SM character insertion mode: ^[[4h 18333# RM character replacement mode: ^[[4l 18334# COO cursor on: ^[[r 18335# COO cursor off: ^[[1r 18336# SGR dim (turquoise) rev attr: ^[[2;7m 18337# SGR Data normal attr: ^[[m 18338# SO Line-graphic mode ON: ^N 18339# SI Line-graphic mode OFF: ^O 18340# MC start routing to printer: ^[[5i 18341# MC stop routing to printer: ^M^[[4i 18342# 18343 18344# This entry covers the following terminals: 18345# dku7102, tws2102, and tws models 2105 to 2112 18346tws-generic|dku7102|Bull Questar tws terminals, 18347 am, eslok, hs, mir, msgr, xenl, xhp@, xon, 18348 cols#80, it#8, lines#24, wsl#80, 18349 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~, 18350 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J, 18351 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 18352 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 18353 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18354 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M, 18355 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K, 18356 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL, 18357 il1=\E[L, ind=^J, invis=\E[0;8m, 18358 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\, 18359 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p, 18360 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D, 18361 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 18362 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027, 18363 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027, 18364 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H, 18365 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i, 18366 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O, 18367 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m, 18368 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N, 18369 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 18370 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\, 18371 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 18372 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m, 18373tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA, 18374 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, 18375 use=tws-generic, 18376tws2103|xdku|BULL Questar tws2103, 18377 ht=^I, use=tws-generic, 18378tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA, 18379 ht=^I, use=tws2102-sna, 18380dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6), 18381 clear=\E[2J\E[H, cup@, dl@, dl1@, 18382 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, 18383 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m, 18384 use=tws-generic, 18385dku7202|BULL Questar 200 DKU7202 (colour/character attributes), 18386 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, 18387 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic, 18388 18389#=========================================================# 18390# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # 18391#=========================================================# 18392# 18393# Description written by J. Staerck (BULL SA) 18394# Copyright (c) 1989 BULL SA 18395#--------------------------------------------------------------------------- 18396# This entry is used for terminals with vt320 emulation mode 18397# and following set-up : 18398# 8 bit ISO Latin Character Set (ISO 8859-1), 18399# 7 bit Control Characters, 18400# 80 columns screen. 18401# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) 18402# They are used in string capabilities with vt220-320 emulation mode. 18403# In the following DEC definitions, two kinds of terminfo databases are 18404# provided : 18405# 1. the first with Command Sequence Introducer starting with escape 18406# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. 18407# 2. the second with Command Sequence Introducer starting with escape 18408# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. 18409# Soft Terminal Reset esc [ ! p 18410# RIS (erases screen): esc c 18411# DECKPNM numeric keypad mode: esc > 18412# DECKPAM applic. keypad mode: esc = 18413# DECSTBM Scrolling region: esc [ r 18414# SCS select G0 = US: esc ( B 18415# SCS select G1 = line-graphic: esc ) 0 18416# Select 7-bit C1 controls: esc sp F 18417# Select 8-bit C1 controls: esc sp G 18418# Select cursor home: esc [ H 18419# Select erase screen: esc [ J 18420# SM KAM lock keyboard: esc [ 2 h 18421# RM KAM unlock keyboard: esc [ 2 l 18422# SM SRM local echo off: esc [ 1 2 h 18423# RM SRM local echo on: esc [ 1 2 l 18424# SM LNM New line : esc [ 2 0 h 18425# RM LNM return = CR only: esc [ 2 0 l 18426# SM DECCKM cursor keys mode: esc [ ? 1 h 18427# RM DECCKM appli. keys mode: esc [ ? 1 l 18428# SM DECANM ANSI mode on: esc [ ? 2 h 18429# RM DECANM ANSI mode off: esc [ ? 2 l 18430# SM DECCOLM 132-column screen: esc [ ? 3 h 18431# RM DECCOLM 80-column screen: esc [ ? 3 l 18432# SM DECSCLM Smooth scroll: esc [ ? 4 h 18433# RM DECSCLM Jump scroll: esc [ ? 4 l 18434# SM DECSCNM screen light backgr. esc [ ? 5 h 18435# RM DECSCNM screen dark backgr. esc [ ? 5 l 18436# SM DECOM move within margins: esc [ ? 6 h 18437# RM DECOM move outside margins: esc [ ? 6 l 18438# SM DECAWM auto right margin: esc [ ? 7 h 18439# RM DECAWM auto right margin: esc [ ? 7 l 18440# SM DECARM auto repeat: esc [ ? 8 h 18441# RM DECARM auto repeat: esc [ ? 8 l 18442# DECSASD Select active main: esc [ 0 $ } 18443# DECSASD Select active status: esc [ 1 $ } 18444# DECSSDT Select status none: esc [ 0 $ ~ 18445# DECSSDT Select status indic.: esc [ 1 $ ~ 18446# DECSSDT Select status host-wr: esc [ 2 $ ~ 18447# SM DECTCEM Visible cursor: esc [ ? 2 5 h 18448# RM DECTCEM Invisible cursor: esc [ ? 2 5 l 18449# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h 18450# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l 18451# SM DECNKM numeric keypad mode: esc [ ? 6 6 h 18452# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l 18453# SM DECKBUM clavier informatique esc [ ? 6 8 h 18454# RM DECKBUM clavier bureautique: esc [ ? 6 8 l 18455# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p 18456# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p 18457# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p 18458# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p 18459# Char. and Line attributes: esc [ Ps ... Ps m 18460# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 18461# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 18462# 18463 18464# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 18465bq300|Bull vt320 ISO Latin 1 80 columns terminal, 18466 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 18467 cols#80, it#8, lines#24, vt#3, wsl#80, 18468 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18469 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 18470 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 18471 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 18472 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 18473 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 18474 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 18475 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J, 18476 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 18477 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, 18478 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 18479 is1=\E[63;1"p\E[2h, 18480 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18481 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, 18482 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 18483 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, 18484 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 18485 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 18486 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, 18487 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 18488 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 18489 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 18490 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, 18491 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l, 18492 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p, 18493 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, 18494 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 18495 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h, 18496 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, 18497 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, 18498bq300-rv|Bull vt320 reverse 80 columns, 18499 flash=\E[?5l$<50>\E[?5h, 18500 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18501 use=bq300, 18502bq300-w|Bull vt320 132 columns, 18503 cols#132, wsl#132, 18504 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18505 rs2=\E[?3h, use=bq300, 18506bq300-w-rv|Bull vt320 reverse mode 132 columns, 18507 cols#132, wsl#132, 18508 flash=\E[?5l$<50>\E[?5h, 18509 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18510 rs2=\E[?3h, use=bq300, 18511 18512# This entry is used for terminals with vt320 emulation mode 18513# and following set-up : 18514# 8 bit ISO Latin Character Set (ISO 8859-1), 18515# 8 bit Control Characters, (CSI coded as x9B for ESC [) 18516# 80 columns screen. 18517# Soft Terminal Reset csi ! p 18518# RIS (erases screen): esc c 18519# DECKPNM numeric keypad mode: esc > 18520# DECKPAM applic. keypad mode: esc = 18521# DECSTBM Scrolling region: esc [ r 18522# SCS select G0 = US: esc ( B 18523# SCS select G1 = line-graphic: esc ) 0 18524# Select 7-bit C1 controls: esc sp F 18525# Select 8-bit C1 controls: esc sp G 18526# Select cursor home: csi H 18527# Select erase screen: csi J 18528# SM KAM lock keyboard: csi 2 h 18529# RM KAM unlock keyboard: csi 2 l 18530# SM SRM local echo off: csi 1 2 h 18531# RM SRM local echo on: csi 1 2 l 18532# SM LNM New line : csi 2 0 h 18533# RM LNM return = CR only: csi 2 0 l 18534# SM DECCKM cursor keys mode: csi ? 1 h 18535# RM DECCKM appli. keys mode: csi ? 1 l 18536# SM DECANM ANSI mode on: csi ? 2 h 18537# RM DECANM ANSI mode off: csi ? 2 l 18538# SM DECCOLM 132-column screen: csi ? 3 h 18539# RM DECCOLM 80-column screen: csi ? 3 l 18540# SM DECSCLM Smooth scroll: csi ? 4 h 18541# RM DECSCLM Jump scroll: csi ? 4 l 18542# SM DECSCNM screen light backgr. csi ? 5 h 18543# RM DECSCNM screen dark backgr. csi ? 5 l 18544# SM DECOM move within margins: csi ? 6 h 18545# RM DECOM move outside margins: csi ? 6 l 18546# SM DECAWM auto right margin: csi ? 7 h 18547# RM DECAWM auto right margin: csi ? 7 l 18548# SM DECARM auto repeat: csi ? 8 h 18549# RM DECARM auto repeat: csi ? 8 l 18550# DECSASD Select active main: csi 0 $ } 18551# DECSASD Select active status: csi 1 $ } 18552# DECSSDT Select status none: csi 0 $ ~ 18553# DECSSDT Select status indic.: csi 1 $ ~ 18554# DECSSDT Select status host-wr: csi 2 $ ~ 18555# SM DECTCEM Visible cursor: csi ? 2 5 h 18556# RM DECTCEM Invisible cursor: csi ? 2 5 l 18557# SM DECNCRM 7 bits NCR set: csi ? 4 2 h 18558# RM DECNCRM Multi or ISO latin: csi ? 4 2 l 18559# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p 18560# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p 18561# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p 18562# Char. and Line attributes: csi Ps ... Ps m 18563# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 18564# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 18565# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr) 18566bq300-8|Bull vt320 full 8 bits 80 columns, 18567 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 18568 cols#80, it#8, lines#24, vt#3, wsl#80, 18569 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18570 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l, 18571 clear=\233H\233J, cnorm=\233?25h, cr=^M, 18572 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D, 18573 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C, 18574 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A, 18575 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, 18576 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J, 18577 el=\233K, el1=\2331K, enacs=\E(B\E)0, 18578 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H, 18579 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED, 18580 is1=\E[63;2"p\E[2h, 18581 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18582 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, 18583 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, 18584 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 18585 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, 18586 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 18587 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 18588 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, 18589 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, 18590 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, 18591 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, 18592 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, 18593 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h, 18594 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 18595 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, 18596 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 18597 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h, 18598 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, 18599 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, 18600bq300-8rv|Bull vt320 8-bit reverse mode 80 columns, 18601 flash=\233?5l$<50>\233?5h, 18602 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18603 use=bq300-8, 18604bq300-8w|Bull vt320 8-bit 132 columns, 18605 cols#132, wsl#132, 18606 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18607 rs2=\233?3h, use=bq300-8, 18608bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns, 18609 cols#132, wsl#132, 18610 flash=\233?5l$<50>\233?5h, 18611 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18612 rs2=\233?3h, use=bq300-8, 18613 18614# This entry is used for terminals with vt320 emulation mode 18615# a 102 keys keyboard (PC scancode !) and following set-up : 18616# 8 bit ISO Latin Character Set (ISO 8859-1), 18617# 7 bit Control Characters, 18618# 80 columns screen. 18619bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, 18620 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 18621 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@, 18622 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~, 18623 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 18624 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 18625 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300, 18626bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, 18627 flash=\E[?5l$<50>\E[?5h, 18628 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18629 use=bq300-pc, 18630bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, 18631 cols#132, wsl#132, 18632 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18633 rs2=\E[?3h, use=bq300-pc, 18634bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, 18635 cols#132, wsl#132, 18636 flash=\E[?5l$<50>\E[?5h, 18637 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18638 rs2=\E[?3h, use=bq300-pc, 18639# 8 bit ISO Latin Character Set (ISO 8859-1), 18640# 8 bit Control Characters, 18641# 80 columns screen. 18642bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, 18643 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~, 18644 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@, 18645 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@, 18646 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 18647 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@, 18648 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@, 18649 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8, 18650bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, 18651 flash=\E[?5l$<50>\E[?5h, 18652 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18653 use=bq300-8-pc, 18654bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, 18655 cols#132, wsl#132, 18656 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18657 rs2=\E[?3h, use=bq300-8-pc, 18658bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, 18659 cols#132, wsl#132, 18660 flash=\E[?5l$<50>\E[?5h, 18661 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18662 rs2=\E[?3h, use=bq300-8-pc, 18663 18664#======================================================# 18665# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # 18666#======================================================# 18667 18668# normal mode, 8 bits, 80 columns terminal. 18669# RES reset : ^[e 18670# RIS reset initial state: ^[c 18671# BLE bell enable ^[h 18672# BLD bell disable ^[g 18673# CAMS char. attr. mode set ^[[D 18674# CAMR char. attr. mode reset ^[[G 18675# CLR clear ^[` 18676# KBU keyboard unlock (set) ^[[W 18677# KBL keyboard lock (reset) ^[[X 18678# CM character mode (async.) ^[k 18679# NEP non echoplex mode (by host) ^[l 18680# EP echoplex mode (by host) ^[m 18681# IM insert mode set ^[[I 18682# IM insert mode reset ^[[J 18683# RMS roll mode set ^[r 18684# RMR roll mode reset ^[q 18685# SM78 set mode vip7800 ^[[1q 18686# SD scroll up (72 lines) ^[[0s 18687# SD scroll down (72 lines) ^[[1s 18688# RBM block mode reset ^[[E 18689# SLS status line set ^[w 18690# SLR status line reset ^[v 18691# SLL status line lock ^[O 18692# LGS Line-graphic mode set ^[G 18693# LGR Line-graphic mode reset ^[F 18694# TBC tab clear (at cursor pos.) ^[[g 18695# TBI tab initialize ^[[N 18696# TBS tab set (at cursor pos.) ^[p 18697# PDS print data space ^[[0p 18698# PHD print host data ^[[3p 18699# PDT print data terminator ^[[<p 18700# PRES print adapter reset ^[[2p 18701# SSPR multi-part. reset ^[[<>u 18702# SSP0 partition 0 set ^[[00u 18703# SSP1 partition n format 1 ^[[PnPnSTRINGu 18704# SSP2 partition n format 2 ^[[PnPnSTRINGu 18705# SSP3 partition n format 3 ^[[PnPnu 18706# ATR attribute (visual) 18707# blink : ^[sB 18708# dim : ^[sL 18709# hide (blank) : ^[sH 18710# restore : ^[sR 18711# inverse video : ^[sI 18712# prot. : ^[sP 18713# underline : ^[s_ 18714# reset : ^{ 18715# 18716# This covers the vip7800 and BQ3155-vip7800 18717vip|Bull Questar 3155-7800, 18718 am, eslok, hs, km, mc5i, msgr, xenl, xon, 18719 cols#80, it#8, lines#24, vt#3, wsl#80, 18720 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, 18721 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18722 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, 18723 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, 18724 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, 18725 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH, 18726 is2=\E[00u\E[<>001001024080024080u\E[01u, 18727 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, 18728 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, 18729 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, 18730 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, 18731 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, 18732 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, 18733 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, 18734 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, 18735 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, 18736 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, 18737 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p, 18738 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI, 18739 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR, 18740 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, 18741 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, 18742 smul=\Es_, tbc=\E[N, tsl=\Ew, 18743# normal screen, 8 bits, 132 columns terminal. 18744vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, 18745 cols#132, wsl#132, 18746 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, 18747vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, 18748 lines#72, 18749 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, 18750vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, 18751 cols#132, lines#72, wsl#132, 18752 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, 18753 18754#### Chromatics 18755# 18756 18757# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window 18758# that is smaller than the screen, and puts up a warning message 18759# outside the window. Te erases the warning message, puts the 18760# window back to be the whole screen, and puts the cursor at just 18761# below the small window. I defined <cnorm> and <civis> to really turn 18762# the cursor on and off, but I have taken this out since I don't 18763# like the cursor being turned off when vi exits. 18764cg7900|chromatics|chromatics 7900, 18765 am, 18766 cols#80, lines#40, 18767 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^], 18768 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, 18769 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|, 18770 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,, 18771 rmso=\001C1\,\001c2\,, 18772 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,, 18773 smso=\001C4\,\001c7\,, uc=\001\001_\001\0, 18774 18775#### Computer Automation 18776# 18777 18778ca22851|computer automation 22851, 18779 am, 18780 cols#80, lines#24, 18781 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I, 18782 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J, 18783 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, 18784 18785#### Cybernex 18786# 18787 18788# This entry has correct padding and the undocumented "ri" capability 18789cyb83|xl83|cybernex xl-83, 18790 OTbs, am, 18791 cols#80, lines#24, 18792 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 18793 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, 18794 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H, 18795 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N, 18796# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) 18797cyb110|mdl110|cybernex mdl-110, 18798 OTbs, am, 18799 cols#80, lines#24, 18800 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 18801 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 18802 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, 18803 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, 18804 ht=\011$<43>, ich1=\016A\035$<3.5>, 18805 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF, 18806 18807#### Datapoint 18808# 18809# Datapoint is gone. They used to be headquartered in Texas. 18810# They created ARCnet, an Ethernet competitor that flourished for a while 18811# in the early 1980s before 3COM got wise and cut its prices. The service 18812# side of Datapoint still lives (1995) in the form of Intelogic Trace. 18813# 18814 18815dp3360|datapoint|datapoint 3360, 18816 OTbs, am, 18817 cols#82, lines#25, 18818 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, 18819 ed=^_, el=^^, home=^], ind=^J, 18820 18821# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997 18822# The Datapoint 8242 Workstation was sold at least between 1985 18823# and 1989. To make the terminal work with this entry, press 18824# CONTROL-INT-INT to take the terminal off-line, and type (opt). 18825# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO 18826# CR/LF off. Use control-shift-[] as escape key, control-I as tab, 18827# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in 18828# fact unusable because the strings sent by the terminal conflict 18829# with other keys). 18830# The terminal is capable of displaying "box draw" characters. 18831# For each graphic character you must send 2 ESC's (\E\E) followed 18832# by a control character as follows: 18833# character meaning 18834# ========= ======= 18835# ctrl-E top tee 18836# ctrl-F right tee 18837# ctrl-G bottom tee 18838# ctrl-H left tee 18839# ctrl-I cross 18840# ctrl-J top left corner 18841# ctrl-K top right corner 18842# ctrl-L bottom left corner 18843# ctrl-M bottom right corner 18844# ctrl-N horizontal line 18845# ctrl-O vertical line 18846# Unfortunately this cannot be fitted into the termcap/terminfo 18847# description scheme. 18848dp8242|datapoint 8242, 18849 msgr, 18850 cols#80, lines#25, 18851 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X, 18852 cr=^M, cub1=^H, cud1=^J, 18853 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V, 18854 home=^U, ht=^I, il1=\E^T, ind=^C, 18855 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 18856 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, 18857 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea, 18858 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J, 18859 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, 18860 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 18861 smso=\E^E, smul=\E^F, 18862 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025, 18863 18864#### DEC terminals (Obsolete types: DECwriter and vt40/42/50) 18865# 18866# These entries are DEC's official terminfos for its older terminals. 18867# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 18868# Engineering for more information. Updated terminfos and termcaps 18869# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 18870# 18871 18872gt40|dec gt40, 18873 OTbs, os, 18874 cols#72, lines#30, 18875 bel=^G, cr=^M, cub1=^H, cud1=^J, 18876gt42|dec gt42, 18877 OTbs, os, 18878 cols#72, lines#40, 18879 bel=^G, cr=^M, cub1=^H, cud1=^J, 18880vt50|dec vt50, 18881 OTbs, 18882 cols#80, lines#12, 18883 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18884 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, 18885vt50h|dec vt50h, 18886 OTbs, 18887 cols#80, lines#12, 18888 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18889 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 18890 el=\EK, ht=^I, ind=^J, ri=\EI, 18891# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>) 18892vt61|vt-61|vt61.5|dec vt61, 18893 cols#80, lines#24, 18894 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J, 18895 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, 18896 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, 18897 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 18898 ri=\E$<20>I, 18899 18900# The gigi does standout with red! 18901# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr) 18902gigi|vk100|dec gigi graphics terminal, 18903 OTbs, am, xenl, 18904 cols#84, lines#24, 18905 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, 18906 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 18907 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 18908 el=\E[K, ht=^I, ind=^J, 18909 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, 18910 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 18911 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 18912 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 18913 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, 18914 smul=\E[4m, 18915 18916# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce 18917# a PC differentiated from the IBM clones. It was a total, ludicrous, 18918# grossly-overpriced failure (among other things, DEC's OS didn't include 18919# a format program, so you had to buy pre-formatted floppies from DEC at 18920# a hefty premium!). 18921pro350|decpro|dec pro console, 18922 OTbs, 18923 cols#80, it#8, lines#24, 18924 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18925 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, 18926 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 18927 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 18928 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, 18929 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, 18930 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, 18931 18932dw1|decwriter I, 18933 OTbs, hc, os, 18934 cols#72, 18935 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, 18936dw2|decwriter|dw|decwriter II, 18937 OTbs, hc, os, 18938 cols#132, 18939 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 18940# \E(B Use U.S. character set (otherwise # => british pound !) 18941# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) 18942# \E[w 10 char/in pitch 18943# \E[1;132 full width horizontal margins 18944# \E[2g clear all tab stops 18945# \E[z 6 lines/in 18946# \E[66t 66 lines/page (for \f) 18947# \E[1;66r full vertical page can be printed 18948# \E[4g clear vertical tab stops 18949# \E> disable alternate keypad mode (so it transmits numbers!) 18950# \E[%i%p1%du set tab stop at column %d (origin == 1) 18951# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is 18952# a tab stop) 18953# 18954# The dw3 does standout with wide characters. 18955# 18956dw3|la120|decwriter III, 18957 OTbs, hc, os, 18958 cols#132, 18959 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, 18960 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, 18961 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r, 18962 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, 18963dw4|decwriter IV, 18964 OTbs, am, hc, os, 18965 cols#132, 18966 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H, 18967 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 18968 18969# These aren't official 18970ln03|dec ln03 laser printer, 18971 hc, 18972 cols#80, lines#66, 18973 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J, 18974 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, 18975 smul=\E[4m, 18976ln03-w|dec ln03 laser printer 132 cols, 18977 cols#132, 18978 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 18979 kcud1=^J, nel=^M^J, use=ln03, 18980 18981#### Delta Data (dd) 18982# 18983 18984# Untested. The cup sequence is hairy enough that it probably needs work. 18985# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. 18986# There are BSD-derived termcap entries floating around for this puppy 18987# that are *certainly* wrong. 18988delta|dd5000|delta data 5000, 18989 OTbs, am, 18990 cols#80, lines#27, 18991 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y, 18992 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c, 18993 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J, 18994 18995#### Digital Data Research (ddr) 18996# 18997 18998# (ddr: I added <rmam>/<smam> based on the init string -- esr) 18999ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, 19000 OTbs, am, xenl, 19001 cols#80, it#8, lines#24, vt#3, 19002 blink=\E[5m$<2/>, bold=\E[1m$<2/>, 19003 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, 19004 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 19005 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 19006 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, 19007 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 19008 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 19009 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, 19010 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, 19011 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 19012 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, 19013 smul=\E[4m$<2/>, 19014 19015#### Evans & Sutherland 19016# 19017 19018# Jon Leech <leech@cs.unc.edu> tells us: 19019# The ps300 was the Evans & Sutherland Picture System 300, a high 19020# performance 3D vector graphics system with a bunch of specialized hardware. 19021# Approximate date of release was 1982 (early 80s, anyway), and it had several 19022# evolutions including (limited) color versions such as the PS330C. PS300s 19023# were effectively obsolete by the late 80s, replaced by raster graphics 19024# systems, although specialized applications like molecular modelling 19025# hung onto them for a while longer. AFAIK all E&S vector graphics systems 19026# are out of production, though of course E&S is very much alive (in 1996). 19027# (ps300: changed ":pt@:" to "it@" -- esr) 19028# 19029ps300|Picture System 300, 19030 xt, 19031 it@, 19032 rmso@, rmul@, smso@, smul@, use=vt100, 19033 19034#### General Electric (ge) 19035# 19036 19037terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, 19038 OTbs, hc, os, 19039 cols#120, 19040 bel=^G, cr=^M, cud1=^J, ind=^J, 19041 19042#### Heathkit/Zenith 19043# 19044 19045# Here is a description of the H19 DIP switches: 19046# 19047# S401 19048# 0-3 = baud rate as follows: 19049# 19050# 3 2 1 0 19051# --- --- --- --- 19052# 0 0 1 1 300 baud 19053# 0 1 0 1 1200 baud 19054# 1 0 0 0 2400 baud 19055# 1 0 1 0 4800 baud 19056# 1 1 0 0 9600 baud 19057# 1 1 0 1 19.2K baud 19058# 19059# 4 = parity (0 = no parity) 19060# 5 = even parity (0 = odd parity) 19061# 6 = stick parity (0 = normal parity) 19062# 7 = full duplex (0 = half duplex) 19063# 19064# S402 19065# 0 = block cursor (0 = underscore cursor) 19066# 1 = no key click (0 = keyclick) 19067# 2 = wrap at end of line (0 = no wrap) 19068# 3 = auto LF on CR (0 = no LF on CR) 19069# 4 = auto CR on LF (0 = no CR on LF) 19070# 5 = ANSI mode (0 = VT52 mode) 19071# 6 = keypad shifted (0 = keypad unshifted) 19072# 7 = 50Hz refresh (1 = 60Hz refresh) 19073# 19074# Factory Default settings are as follows: 19075# 7 6 5 4 3 2 1 0 19076# S401 1 0 0 0 1 1 0 0 19077# S402 0 0 0 0 0 0 0 0 19078# (h19: I added <rmam>/<smam> based on the init string; 19079# also added empty <acsc> to suppress a tic warning -- esr) 19080h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode, 19081 OTbs, am, mir, msgr, 19082 cols#80, it#8, lines#24, 19083 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H, 19084 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, 19085 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, 19086 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J, 19087 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, 19088 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, 19089 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, 19090 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, 19091 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, 19092 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, 19093h19-bs|heathkit w/keypad shifted, 19094 rmkx=\Eu, smkx=\Et, use=h19-b, 19095h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor, 19096 rmkx=\Eu, smkx=\Et, use=h19-u, 19097# (h19: merged in <ip> from BSDI hp19-e entry>; 19098# also added empty <acsc> to suppress a tic warning --esr) 19099# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 19100# Tim tells us that: 19101# I have an old Zenith-19 terminal at home that still gets a lot of use. 19102# This terminal suffers from the same famous insert-mode padding lossage 19103# that has been acknowledged for the Z29 terminal. Emacs is nearly 19104# unusable on this box, since even a half-scroll up or down the window 19105# causes flaming terminal death. 19106# 19107# On the Z19, the only way I have found around this problem is to remove 19108# the :al: and :dl: entries entirely. No amount of extra padding will 19109# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$> 19110# makes Emacs a little slower, but it remains in the land of the living. 19111# Big win. 19112h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, 19113 OTbs, am, eslok, hs, mir, msgr, 19114 cols#80, it#8, lines#24, 19115 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G, 19116 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 19117 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4, 19118 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J, 19119 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19120 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, 19121 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, 19122 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 19123 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, 19124h19-u|heathkit with underscore cursor, 19125 cnorm@, cvvis@, use=h19-b, 19126h19-g|h19g|heathkit w/block cursor, 19127 cnorm=\Ex4, cvvis@, use=h19-b, 19128alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19, 19129 lines#60, 19130 dl1=\EM, il1=\EL, use=h19, 19131 19132# The major problem with the Z29 is that it requires more padding than the Z19. 19133# 19134# The problem with declaring an H19 to be synonymous with a Z29 is that 19135# it needs more padding. It especially loses if a program attempts 19136# to put the Z29 into insert mode and insert text at 9600 baud. It 19137# even loses worse if the program attempts to insert tabs at 9600 19138# baud. Adding padding to text that is inserted loses because in 19139# order to make the Z29 not die, one must add so much padding that 19140# whenever the program tries to use insert mode, the effective 19141# rate is about 110 baud. 19142# 19143# What program would want to put the terminal into insert mode 19144# and shove stuff at it at 9600 baud you ask? 19145# 19146# Emacs. Emacs seems to want to do the mathematically optimal 19147# thing in doing a redisplay rather than the practical thing. 19148# When it is about to output a line on top of a line that is 19149# already on the screen, instead of just killing to the end of 19150# the line and outputting the new line, it compares the old line 19151# and the new line and if there are any similarities, it 19152# constructs the new line by deleting the text on the old line 19153# on the terminal that is already there and then inserting new 19154# text into the line to transform it into the new line that is 19155# to be displayed. The Z29 does not react kindly to this. 19156# 19157# But don't cry for too long.... There is a solution. You can make 19158# a termcap entry for the Z29 that says the Z29 has no insert mode. 19159# Then Emacs cannot use it. "Oh, no, but now inserting into a 19160# line will be really slow", you say. Well there is a sort of a 19161# solution to that too. There is an insert character option on 19162# the Z29 that will insert one character. Unfortunately, it 19163# involves putting the terminal into ansi mode, inserting the 19164# character, and changing it back to H19 mode. All this takes 12 19165# characters. Pretty expensive to insert one character, but it 19166# works. Either Emacs doesn't try to use its inserting hack when 19167# it's only given an insert character ability or the Z29 doesn't 19168# require padding with this (the former is probably more likely, 19169# but I haven't checked it out). 19170# (z29: added empty <acsc> to suppress a tic warning, merged in 19171# status line capabilities from BRL entry --esr) 19172z29|zenith29|z29b|zenith z29b, 19173 OTbs, OTpt, am, eslok, hs, mir, msgr, 19174 OTkn#10, cols#80, lines#24, 19175 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, 19176 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 19177 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, 19178 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, 19179 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, 19180 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, 19181 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19182 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 19183 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 19184 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, 19185 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, 19186 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 19187# z29 in ansi mode. Assumes that the cursor is in the correct state, and that 19188# the world is stable. <rs1> causes the terminal to be reset to the state 19189# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore 19190# cursor, bc -> block cursor. 19191# From: Mike Meyers 19192# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts> 19193# looks vt100-compatible -- esr) 19194z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, 19195 OTbs, OTpt, am, eslok, hs, mir, msgr, 19196 OTkn#10, cols#80, it#8, lines#24, 19197 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, 19198 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19199 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 19200 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 19201 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 19202 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H, 19203 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL, 19204 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB, 19205 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS, 19206 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 19207 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7, 19208 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h, 19209 rmso=\E[m, rmul=\E[m, 19210 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, 19211 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, 19212 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, 19213z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, 19214 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m, 19215 use=z29a, 19216z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, 19217 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m, 19218 use=z29a, 19219z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, 19220 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m, 19221 use=z29a, 19222# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995 19223z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, 19224 am, eslok, hs, mc5i, mir, msgr, xon, 19225 cols#80, lines#24, 19226 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 19227 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, 19228 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M, 19229 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19230 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 19231 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 19232 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 19233 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, 19234 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, 19235 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, 19236 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, 19237 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, 19238 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 19239 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, 19240 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, 19241 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, 19242 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, 19243 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 19244 tsl=\E[s\E[>1h\E[25;%i%p1%dH, 19245 19246# From: Brad Brahms <Brahms@USC-ECLC> 19247z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, 19248 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw, 19249# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr) 19250z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, 19251 OTbs, OTpt, mir, msgr, 19252 OTkn#10, cols#80, it#8, lines#24, 19253 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, 19254 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC, 19255 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA, 19256 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK, 19257 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB, 19258 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU, 19259 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI, 19260 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 19261 smir=\E@, smso=\Ep, 19262p19|h19-b with il1/dl1, 19263 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, 19264# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu> 19265# (ztx: removed duplicate :sr: -- esr) 19266ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, 19267 OTbs, am, eslok, hs, 19268 cols#80, it#8, lines#24, 19269 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, 19270 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 19271 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, 19272 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, 19273 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, 19274 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, 19275 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, 19276 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 19277 19278#### IMS International (ims) 19279# 19280# There was a company called IMS International located in Carson City, 19281# Nevada, that flourished from the mid-70s to mid-80s. They made S-100 19282# bus/Z80 hardware and a line of terminals called Ultimas. 19283# 19284 19285# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 19286ims950-b|bare ims950 no init string, 19287 is2@, use=ims950, 19288# (ims950: removed obsolete ":ko@:" -- esr) 19289ims950|ims televideo 950 emulation, 19290 xenl@, 19291 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 19292 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950, 19293# (ims950-rv: removed obsolete ":ko@:" -- esr) 19294ims950-rv|ims tvi950 rev video, 19295 xenl@, 19296 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 19297 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv, 19298ims-ansi|ultima2|ultimaII|IMS Ultima II, 19299 OTbs, am, 19300 cols#80, it#8, lines#24, 19301 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC, 19302 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, 19303 ht=^I, if=/usr/share/tabset/vt100, 19304 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, 19305 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, 19306 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, 19307 smul=\E[4m, 19308 19309#### Intertec Data Systems 19310# 19311# I think this company is long dead as of 1995. They made an early CP/M 19312# micro called the "Intertec Superbrain" that was moderately popular, 19313# then sank out of sight. 19314# 19315 19316superbrain|intertec superbrain, 19317 OTbs, am, bw, 19318 cols#80, lines#24, 19319 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, 19320 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, 19321 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U, 19322 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, 19323# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, 19324# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, 19325# and the reverse is actually true. Try it. -- esr) 19326intertube|intertec|Intertec InterTube, 19327 OTbs, am, 19328 cols#80, lines#25, 19329 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 19330 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, 19331 ind=^J, rmso=\E0@, smso=\E0P, 19332# The intertube 2 has the "full duplex" problem like the tek 4025: if you 19333# are typing and a command comes in, the keystrokes you type get interspersed 19334# with the command and it messes up 19335intertube2|intertec data systems intertube 2, 19336 OTbs, 19337 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 19338 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, 19339 ll=^K^X\r, vpa=\013%p1%c, use=intertube, 19340 19341#### Ithaca Intersystems 19342# 19343# This company made S100-bus personal computers long ago in the pre-IBM-PC 19344# past. They used to be reachable at: 19345# 19346# Ithaca Intersystems 19347# 1650 Hanshaw Road 19348# Ithaca, New York 14850 19349# 19350# However, the outfit went bankrupt years ago. 19351# 19352 19353# The Graphos III was a color graphics terminal from Ithaca Intersystems. 19354# These entries were written (originally in termcap syntax) by Brian Yandell 19355# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the 19356# University of Wisconsin. 19357 19358# (graphos: removed obsolete and syntactically incorrect :kn=4:, 19359# removed <if=/usr/share/tabset/init.graphos> and 19360# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr) 19361graphos|graphos III, 19362 am, mir, 19363 cols#80, it#8, lines#24, 19364 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, 19365 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 19366 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19367 cuu=\E[%p1%dA, cuu1=\E[A, 19368 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, 19369 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 19370 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19371 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 19372 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l, 19373 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, 19374 smir=\E[4h, smso=\E[7m, 19375graphos-30|graphos III with 30 lines, 19376 lines#30, 19377 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, 19378 19379#### Modgraph 19380# 19381# These people used to be reachable at: 19382# 19383# Modgraph, Inc 19384# 1393 Main Street, 19385# Waltham, MA 02154 19386# Vox: (617)-890-5796. 19387# 19388# However, if you call that number today you'll get an insurance company. 19389# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated 19390# 26 Feb 1997 that says: 19391# 19392# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been 19393# for ~7 years. Modgraph still in business. Products are rugged laptop and 19394# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount 19395# panel-mount etc). I can be emailed at sonfour@aol.com 19396# 19397# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was 19398# dated 1984. According to the manual, it featured Tek 4010/4014 19399# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. 19400# 19401 19402modgraph|mod24|modgraph terminal emulating vt100, 19403 xenl@, 19404 cols#80, lines#24, 19405 cvvis=\E\^9;0s\E\^7;1s, 19406 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, 19407 rf@, ri=\EM\E[K$<5/>, use=vt100, 19408# The GX-1000 manual is dated 1984. This looks rather like a VT-52. 19409modgraph2|modgraph gx-1000 80x24 with keypad not enabled, 19410 am, da, db, 19411 cols#80, it#8, lines#24, 19412 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>, 19413 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, 19414 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, 19415 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, 19416 ri=\EI$<5/>, 19417# 19418# Modgraph from Nancy L. Cider <nancyc@brl-tbd> 19419# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>: 19420# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a 19421# mark and using delete-to-killbuffer work correctly. However, we would 19422# like normal mode of operation to be using a Modgraph with 48 line setting. 19423# If we set TERM=mod (which is a valid entry in termcap with 48 lines) 19424# the setting mark and delete-to-killbuffer results in the deletion of only 19425# the line the mark is set on. 19426# We've discovered that the delete-to-killbuffer works correctly 19427# with TERM=mod and screen set to 80x48 but it's not obvious. Only 19428# the first line disappears but a ctrl-l shows that it did work 19429# correctly. 19430modgraph48|mod|Modgraph w/48 lines, 19431 OTbs, OTpt, am, xenl, 19432 cols#80, it#8, lines#48, vt#3, 19433 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 19434 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 19435 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 19436 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, 19437 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, 19438 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 19439 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, 19440 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 19441 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 19442 smso=\E[7m, smul=\E[4m, 19443 19444#### Morrow Designs 19445# 19446# This was George Morrow's company. They started in the late 1970s making 19447# S100-bus machines. They used to be reachable at: 19448# 19449# Morrow 19450# 600 McCormick St. 19451# San Leandro, CA 94577 19452# 19453# but they're long gone now (1995). 19454# 19455 19456# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. 19457# Jeff's specimen was dated June 1984. 19458# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 19459mt70|mt-70|Morrow MD-70; native Morrow mode, 19460 am, mir, msgr, xon, 19461 cols#80, it#8, lines#24, 19462 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, 19463 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H, 19464 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, 19465 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, 19466 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, 19467 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, 19468 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, 19469 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, 19470 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, 19471 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, 19472 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19473 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, 19474 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], 19475 smul=\EG1, tbc=\E0, use=adm+sgr, 19476 19477#### Motorola 19478# 19479 19480# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL 19481# (Seth H Zirin) 19482ex155|Motorola Exorterm 155, 19483 OTbs, am, bw, 19484 OTkn#5, OTug#1, cols#80, lines#24, 19485 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC, 19486 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET, 19487 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, 19488 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, 19489 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, 19490 19491#### Omron 19492# 19493# This company is still around in 1995, manufacturing point-of-sale systems. 19494 19495omron|Omron 8025AG, 19496 OTbs, am, da, db, 19497 cols#80, lines#24, 19498 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, 19499 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, 19500 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, 19501 19502#### Ramtek 19503# 19504# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they 19505# were competition for things like the Tektronics 4025. 19506# 19507 19508# Ramtek 6221 from BRL, probably by Doug Gwyn 19509# The following SET-UP modes are assumed for normal operation: 19510# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON 19511# NEWLINE_OFF 80_COLUMNS 19512# Other SET-UP modes may be set for operator convenience or communication 19513# requirements; I recommend 19514# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON 19515# Hardware tabs are assumed to be every 8 columns; they can be set up by the 19516# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). 19517# Note that the Control-E key is useless on this brain-damaged terminal. No 19518# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 19519rt6221|Ramtek 6221 80x24, 19520 OTbs, OTpt, msgr, xon, 19521 OTkn#4, cols#80, it#8, lines#24, vt#3, 19522 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, 19523 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, 19524 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19525 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 19526 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 19527 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, 19528 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19529 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 19530 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, 19531 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, 19532 rmso=\E[m, rmul=\E[m, 19533 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, 19534 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, 19535 smul=\E[4m, tbc=\E[3g, 19536# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. 19537rt6221-w|Ramtek 6221 160x48, 19538 cols#160, lines#48, 19539 ll=\E[48;1H, use=rt6221, 19540 19541#### RCA 19542# 19543 19544# RCA VP3301 or VP3501 19545rca|rca vp3301/vp3501, 19546 OTbs, 19547 cols#40, lines#24, 19548 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 19549 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, 19550 19551 19552#### Selanar 19553# 19554 19555# Selanar HiREZ-100 from BRL, probably by Doug Gwyn 19556# The following SET-UP modes are assumed for normal operation: 19557# SET_DEFAULT_TABS 48_LINES 80_COLUMNS 19558# ONLINE ANSI CURSOR_VISIBLE 19559# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF 19560# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED 19561# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN 19562# For use with graphics software, all graphics modes should be set to factory 19563# default. Other SET-UP modes may be set for operator convenience or 19564# communication requirements. No delays are specified; use "stty ixon -ixany" 19565# to enable DC3/DC1 flow control! 19566# I commented out the scrolling capabilities since they are too slow. 19567hirez100|Selanar HiREZ-100, 19568 OTbs, OTpt, mir, msgr, xon, 19569 OTkn#4, cols#80, it#8, lines#48, vt#3, 19570 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 19571 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 19572 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19573 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 19574 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 19575 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, 19576 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, 19577 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, 19578 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, 19579 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, 19580 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 19581 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, 19582 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 19583 smul=\E[4m, tbc=\E[3g, 19584hirez100-w|Selanar HiREZ-100 in 132-column mode, 19585 cols#132, use=hirez100, 19586 19587#### Signetics 19588# 19589 19590# From University of Wisconsin 19591vsc|Signetics Vsc Video driver by RMC, 19592 am, msgr, 19593 cols#80, it#8, lines#26, 19594 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 19595 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 19596 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s, 19597 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", 19598 19599#### Soroc 19600# 19601# Alan Frisbie <frisbie@flying-disk.com> writes: 19602# 19603# As you may recall, the Soroc logo consisted of their name, 19604# with the letter "S" superimposed over an odd design. This 19605# consisted of a circle with a slightly smaller 15 degree (approx.) 19606# wedge with rounded corners inside it. The color was sort of 19607# a metallic gold/yellow. 19608# 19609# If I had been more of a beer drinker it might have been obvious 19610# to me, but it took a clue from their service department to make 19611# me exclaim, "Of course!" The circular object was the top of 19612# a beer can (the old removable pop-top style) and "Soroc" was an 19613# anagram for "Coors". 19614# 19615# I can just imagine the founders of the company sitting around 19616# one evening, tossing back a few and trying to decide what to 19617# call their new company and what to use for a logo. 19618# 19619 19620# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) 19621soroc120|iq120|soroc|soroc iq120, 19622 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J, 19623 kcuf1=^L, kcuu1=^K, use=adm3a, 19624soroc140|iq140|soroc iq140, 19625 OTbs, am, mir, 19626 cols#80, lines#24, 19627 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 19628 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, 19629 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J, 19630 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, 19631 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19632 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, 19633 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A, 19634 19635#### Southwest Technical Products 19636# 19637# These guys made an early personal micro called the M6800. 19638# The ct82 was probably its console terminal. 19639# 19640 19641# (swtp: removed obsolete ":bc=^D:" -- esr) 19642swtp|ct82|southwest technical products ct82, 19643 am, 19644 cols#82, lines#20, 19645 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, 19646 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, 19647 home=^P, ich1=^\^X, il1=^\^Y, ind=^N, 19648 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, 19649 ll=^C, ri=^O, rmso=^^^F, smso=^^^V, 19650 19651#### Synertek 19652# 19653# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995): 19654# 19655# Synertek used to make ICs, various 6502-based single-board process 19656# control and hobbyist computers, and assorted peripherals including a 19657# series of small inexpensive terminals (I think they were one of the 19658# first to have a "terminal-on-a-keyboard", where the terminal itself 19659# was only slightly larger than the keyboard). 19660# 19661# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 19662# was a 40x24 terminal that could connect to a standard TV through a 19663# video modulator. The KTM-2/80 was the 80-column version (the 2/40 19664# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). 19665# I have a KTM-2/80 still in working order. The KTM-2s had fully 19666# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program 19667# ROM and 2 ROMs as character generators. They were incredibly simple, 19668# and I've never had any problems with mine (witness the fact that mine 19669# was made in 1981 and is still working great... I've blown the video 19670# output transistor a couple of times, but it's a 2N2222 :-) 19671# 19672# The KTM-3 (which is what is listed in the terminfo file) was their 19673# attempt at putting a KTM-2 in a box (and some models came with a 19674# CRT). It wasn't much different from the KTM-2 hardware-wise, but the 19675# control and escape sequences are very different. The KTM-3 was always 19676# real broken, at least according to the folks I've talked to about it. 19677# 19678# The padding in the entry is probably off--these terminals were very 19679# slow (it takes like 100ms for the KTM-2 to clear the screen...) And 19680# anyone with any sanity replaced the ROMs with something that provided 19681# a reasonable subset of VT100 functionality, since the usual ROMs were 19682# obviously very primitive... oh, you could get an upgraded ROM from 19683# Synertek for some incredible amount of money, but what hacker with an 19684# EPROM burner would do that? :) 19685# 19686# Sorry I don't have any contact info; I believe they were located in 19687# Sunnyvale, and I'm fairly sure they are still manufacturing ICs 19688# (they've gone to ASICs and FPGAs), but I doubt they're in the computer 19689# business these days. 19690# 19691 19692# Tested, seems to work fine with vi. 19693synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal, 19694 am, 19695 cols#80, lines#24, 19696 clear=^Z, cub1=^H, cuf1=^L, 19697 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 19698 19699#### Tab Office Products 19700# 19701# TAB Products Co. - Palo Alto, California 19702# Electronic Office Products, 19703# 1451 California Avenue 94304 19704# 19705# I think they're out of business. 19706# 19707 19708# The tab 132 uses xon/xoff, so no padding needed. 19709# <smkx>/<rmkx> have nothing to do with arrow keys. 19710# <is2> sets 80 col mode, normal video, autowrap on (for <am>). 19711# Seems to be no way to get rid of status line. 19712# The manual for this puppy was dated June 1981. It claims to be VT52- 19713# compatible but looks more vt100-like. 19714tab132|tab|tab132-15|tab 132/15, 19715 da, db, 19716 OTdN@, cols#80, lines#24, lm#96, 19717 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, 19718 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B, 19719 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100, 19720tab132-w|tab132 in wide mode, 19721 cols#132, 19722 is2=\E[?7h\E[?3h\E[?5l, use=tab132, 19723tab132-rv|tab132 in reverse-video mode, 19724 is2=\E[?7h\E[?3l\E[?5h, use=tab132, 19725tab132-w-rv|tab132 in reverse-video/wide mode, 19726 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, 19727 19728 19729#### Teleray 19730# 19731# Research Incorporated 19732# 6425 Flying Cloud Drive 19733# Eden Prairie, MN 55344 19734# Vox: (612)-941-3300 19735# 19736# The Teleray terminals were all discontinued in 1992-93. RI still services 19737# and repairs these beasts, but no longer manufactures them. The Teleray 19738# people believe that all the types listed below are very rare now (1995). 19739# There was a newer line of Telerays (Model 7, Model 20, Model 30, and 19740# Model 100) that were ANSI-compatible. 19741# 19742# Note two things called "teleray". Reorder should move the common one 19743# to the front if you have either. A dumb teleray with the cursor stuck 19744# on the bottom and no obvious model number is probably a 3700. 19745# 19746 19747t3700|dumb teleray 3700, 19748 OTbs, 19749 cols#80, lines#24, 19750 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J, 19751t3800|teleray 3800 series, 19752 OTbs, 19753 cols#80, it#8, lines#24, 19754 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19755 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 19756 home=\EH, ht=^I, ind=^J, ll=\EY7\s, 19757t1061|teleray|teleray 1061, 19758 OTbs, am, km, xhp, xt, 19759 cols#80, it#8, lines#24, xmc#1, 19760 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19761 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 19762 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF, 19763 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>, 19764 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, 19765 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, 19766 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH, 19767 tbc=\EG, 19768t1061f|teleray 1061 with fast PROMs, 19769 dl1=\EM, il1=\EL, ip@, use=t1061, 19770# "Teleray Arpa Special", officially designated as 19771# "Teleray Arpa network model 10" with "Special feature 720". 19772# This is the new (1981) fast microcode updating the older "arpa" proms 19773# (which gave meta-key and programmable-fxn keys). 720 is much much faster, 19774# converts the keypad to programmable function keys, and has other goodies. 19775# Standout mode is still broken (magic cookie, etc) so is suppressed as no 19776# programs handle such lossage properly. 19777# Note: this is NOT the old termcap's "t1061f with fast proms." 19778# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah 19779# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr) 19780t10|teleray 10 special, 19781 OTbs, km, xhp, xt, 19782 cols#80, it#8, lines#24, xmc#2, 19783 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC, 19784 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 19785 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 19786 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD, 19787 smul=\ERH, 19788# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and 19789# back/forth words. Put the function keys (f1-f10) where they can be 19790# found, and turn off the other magic keys along the top row, except 19791# for line/local. Do the magic appropriate to make the page shifts work. 19792# Also toggle ^S/^Q for those of us who use Emacs. 19793t16|teleray 16, 19794 am, da, db, mir, xhp, xt, 19795 cols#80, lines#24, 19796 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 19797 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P, 19798 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L, 19799 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, 19800 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, 19801 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, 19802 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, 19803 smso=\E[7m, smul=\E[4m, 19804 19805#### Texas Instruments (ti) 19806# 19807 19808# The Silent 700 was so called because it was built around a quiet thermal 19809# printer. It was portable, equipped with an acoustic coupler, and pretty 19810# neat for its day. 19811ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800, 19812 OTbs, hc, os, 19813 cols#80, 19814 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J, 19815 19816# 19817# Texas Instruments 916 VDT 7 bit control mode 19818# 19819ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL, 19820 da, db, in, msgr, 19821 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>, 19822 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB, 19823 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 19824 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM, 19825 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K, 19826 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, 19827 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, 19828 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, 19829 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~, 19830 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, 19831 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 19832 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, 19833 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@, 19834 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 19835 use=vt220, 19836# 19837# Texas Instruments 916 VDT 8 bit control mode 19838# 19839ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL, 19840 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 19841 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~, 19842 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~, 19843 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 19844 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, 19845 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916, 19846# 19847# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode 19848# 19849ti916-132|Texas Instruments 916 VDT vt220 132 column, 19850 cols#132, use=ti916, 19851# 19852# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode 19853# 19854ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column, 19855 cols#132, use=ti916-8, 19856ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL, 19857 OTbs, am, xon, 19858 cols#80, it#8, lines#24, 19859 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 19860 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 19861 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 19862 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 19863 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 19864 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19865 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ, 19866 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~, 19867 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m, 19868 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 19869 smul=\E[4m, tbc=\E[3g, 19870ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL, 19871 am, xon, 19872 cols#80, it#8, lines#24, 19873 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 19874 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 19875 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 19876 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 19877 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 19878 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19879 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>, 19880 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>, 19881 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>, 19882 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM, 19883 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 19884 smul=\E[4m, tbc=\E[3g, 19885ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode, 19886 cols#132, use=ti924, 19887ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode, 19888 cols#132, use=ti924-8, 19889ti931|Texas Instruments 931 VDT, 19890 OTbs, am, xon, 19891 cols#80, lines#24, 19892 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED, 19893 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 19894 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, 19895 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H, 19896 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19897 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, 19898 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9, 19899 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@, 19900 sgr0=\E4@, smso=\E4A, smul=\E4D, 19901ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL, 19902 csr@, ind=\E[1S, ri=\E[1T, use=ti924, 19903# (ti926-8: I corrected this from the broken SCO entry -- esr) 19904ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL, 19905 csr@, ind=\2331S, ri=\2331T, use=ti924-8, 19906ti_ansi|basic entry for ti928, 19907 am, bce, eo, xenl, xon, 19908 colors#8, cols#80, it#8, lines#25, pairs#64, 19909 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, 19910 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 19911 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 19912 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 19913 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19914 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M, 19915 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, 19916 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, 19917 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m, 19918 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, 19919 smso=\E[7m, smul=\E[4m, 19920# 19921# 928 VDT 7 bit control mode 19922# 19923ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL, 19924 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~, 19925 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, 19926 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, 19927 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 19928 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi, 19929# 19930# 928 VDT 8 bit control mode 19931# 19932ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL, 19933 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~, 19934 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~, 19935 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~, 19936 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, 19937 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, 19938 kpp=\233T, kprt=\23335~, use=ti_ansi, 19939 19940#### Zentec (zen) 19941# 19942 19943# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally 19944# had just <smso>=\EG6 which I think means standout was supposed to be 19945# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and 19946# <invis> might work-- esr) 19947zen30|z30|zentec 30, 19948 OTbs, am, mir, ul, 19949 cols#80, lines#24, 19950 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 19951 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 19952 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, 19953 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6, 19954 smul@, use=adm+sgr, 19955# (zen50: this had extension capabilities 19956# :BS=^U:CL=^V:CR=^B: 19957# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, 19958# which were also in the original entry -- esr) 19959# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) 19960zen50|z50|zentec zephyr, 19961 OTbs, am, 19962 cols#80, lines#24, xmc#1, 19963 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 19964 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE, 19965 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 19966 rmul@, smul@, use=adm+sgr, 19967 19968# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL 19969cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, 19970 OTbs, am, bw, 19971 cols#80, lines#24, 19972 blink=\EM", clear=\EH\EJ, cnorm=\EP, 19973 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J, 19974 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 19975 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, 19976 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED, 19977 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R, 19978 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s, 19979 smso=\EM$, smul=\EM0, 19980 19981######## OBSOLETE UNIX CONSOLES 19982# 19983 19984#### Apollo consoles 19985# 19986# Apollo got bought by Hewlett-Packard. The Apollo workstations are 19987# labeled HP700s now. 19988# 19989 19990# From: Gary Darland <goodmanc@garnet.berkeley.edu> 19991apollo|apollo console, 19992 OTbs, am, mir, 19993 cols#88, lines#53, 19994 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, 19995 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL, 19996 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED, 19997 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ, 19998 smso=\ES, smul=\EU, vpa=\EO+\s, 19999 20000# We don't know whether or not the apollo guys replicated DEC's firmware bug 20001# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable 20002# both these capabilities. 20003apollo_15P|apollo 15 inch display, 20004 rmir@, smir@, use=vt132, 20005apollo_19L|apollo 19 inch display, 20006 rmir@, smir@, use=vt132, 20007apollo_color|apollo color display, 20008 rmir@, smir@, use=vt132, 20009 20010#### Convergent Technology 20011# 20012# Burroughs bought Convergent shortly before it merged with Univac. 20013# CTOS is (I believe) dead. Probably the aws is too (this entry dates 20014# from 1991 or earlier). 20015# 20016 20017# Convergent AWS workstation from Gould/SEL UTX/32 via BRL 20018# (aws: removed unknown :dn=^K: -- esr) 20019aws|Convergent Technologies AWS workstation under UTX and Xenix, 20020 am, 20021 OTug#0, cols#80, lines#28, xmc#0, 20022 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=, 20023 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, 20024 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, 20025 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, 20026 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, 20027 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, 20028 vpa=\EV%p1%c, 20029awsc|Convergent Technologies AWS workstation under CTOS, 20030 am, 20031 OTug#0, cols#80, lines#24, xmc#0, 20032 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, 20033 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, 20034 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, 20035 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, 20036 smul=\EAC, 20037 20038#### DEC consoles 20039# 20040 20041# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes: 20042# The digital uVax II's had a graphic display called a qdss. It was 20043# supposed to be a high performance graphic accelerator, but it was 20044# late to market and barely appeared before faster dumb frame buffers 20045# appeared. I have only used this display while running X11. However, 20046# during bootup, it was in text mode, and probably had a terminal emulator 20047# within it. And that is what your termcap entry is for. In graphics 20048# mode the screen size is 1024x864 pixels. 20049qdss|qdcons|qdss glass tty, 20050 OTbs, am, 20051 cols#128, lines#57, 20052 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L, 20053 cup=\E=%p1%c%p2%c, cuu1=^K, 20054 20055#### Fortune Systems consoles 20056# 20057# Fortune made a line of 68K-based UNIX boxes that were pretty nifty 20058# in their day; I (esr) used one myself for a year or so around 1984. 20059# They had no graphics, though, and couldn't compete against Suns and 20060# the like. R.I.P. 20061# 20062 20063# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983 20064# (This had extension capabilities 20065# :rv=\EH:re=\EI:rg=0:GG=0:\ 20066# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ 20067# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ 20068# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: 20069# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had 20070# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) 20071# to force both magic cookie glitches off. Once upon a time, I 20072# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are 20073# function keys; thus the "Al" value for HM was certainly an error. I renamed 20074# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. 20075# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent 20076# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard 20077# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) 20078fos|fortune|Fortune system, 20079 OTbs, am, bw, 20080 cols#80, lines#25, 20081 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E], 20082 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>, 20083 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>, 20084 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>, 20085 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z, 20086 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H, 20087 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, 20088 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, 20089 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, 20090 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH, 20091 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo, 20092 smso=^\H`, smul=^\HP, 20093 20094#### Masscomp consoles 20095# 20096# Masscomp has gone out of business. Their product line was purchased by 20097# comany in Georgia (US) called "XS International", parts and service may 20098# still be available through them. 20099# 20100 20101# (masscomp: ":MT:" changed to ":km:"; -- esr) 20102masscomp|masscomp workstation console, 20103 OTbs, km, mir, 20104 cols#80, it#8, lines#24, 20105 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 20106 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 20107 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H, 20108 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, 20109 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, 20110masscomp1|masscomp large screen version 1, 20111 cols#104, lines#36, use=masscomp, 20112masscomp2|masscomp large screen version 2, 20113 cols#64, lines#21, use=masscomp, 20114 20115######## OTHER OBSOLETE TYPES 20116# 20117# These terminals are *long* dead -- these entries are retained for 20118# historical interest only. 20119# 20120 20121#### Obsolete non-ANSI software emulations 20122# 20123 20124# CTRM terminal emulator 20125# 1. underlining is not allowed with colors: first, is is simulated by 20126# black on white, second, it disables background color manipulations. 20127# 2. BLINKING, REVERSE and BOLD are allowed with colors, 20128# so we have to save their status in the static registers A, B and H 20129# respectively, to be able to restore them when color changes 20130# (because any color change turns off ALL attributes) 20131# 3. <bold> and <rev> sequences alternate modes, 20132# rather than simply entering them. Thus we have to check the 20133# static register B and H to determine the status, before sending the 20134# escape sequence. 20135# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero 20136# and then reset colors 20137# 5. implementation of the protect mode would badly penalize the performance. 20138# we would have to use \E&bn sequence to turn off colors (as well as all 20139# other attributes), and keep the status of protect mode in yet another 20140# static variable. If someone really needs this mode, they would have to 20141# create another terminfo entry. 20142# 6. original color-pair is white on black. 20143# store the information about colors into static registers 20144# 7. set foreground color. it performs the following steps. 20145# 1) turn off all attributes 20146# 2) turn on the background and video attributes that have been turned 20147# on before (this information is stored in static registers X,Y,Z,A,B,H,D). 20148# 3) turn on foreground attributes 20149# 4) store information about foreground into U,V,W static registers 20150# 8. turn on background: similar to turn on foreground above 20151ctrm|C terminal emulator, 20152 am, bce, xon, 20153 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0, 20154 pairs#63, pb#19200, vt#6, 20155 bel=^G, blink=\E&dA%{1}%PA, 20156 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei, 20157 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 20158 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, 20159 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1, 20160 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r, 20161 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, 20162 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, 20163 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, 20164 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU, 20165 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA, 20166 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX, 20167 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU, 20168 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;, 20169 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB, 20170 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 20171 20172# gs6300 - can't use blue foreground, it clashes with underline; 20173# it's simulated with cyan 20174# Bug: The <op> capability probably resets attributes. 20175# (gs6300: commented out <rmln> (no <smln>) --esr) 20176gs6300|emots|AT&T PC6300 with EMOTS terminal emulator, 20177 am, bce, msgr, xon, 20178 colors#8, cols#80, it#8, lines#24, pairs#63, 20179 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20180 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 20181 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 20182 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20183 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 20184 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 20185 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 20186 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B, 20187 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, 20188 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, 20189 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m, 20190 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm, 20191 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m, 20192 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, 20193 20194# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT 20195# MS-Kermit with Heath-19 emulation mode enabled 20196# (h19k: changed ":pt@:" to ":it@" 20197h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin), 20198 am@, da, db, xt, 20199 it@, 20200 ht@, use=h19-u, 20201 20202# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy 20203# Software (formerly Peripherals Computers & Supplies, Inc) of 20204# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can 20205# also be reached at support@synergy.com. 20206versaterm|versaterm vt100 emulator for the macintosh, 20207 am, xenl, 20208 cols#80, it#8, lines#24, 20209 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 20210 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 20211 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 20212 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 20213 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>, 20214 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>, 20215 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, 20216 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 20217 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, 20218 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 20219 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>, 20220 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>, 20221 smul=\E[4m$<2/>, 20222 20223# From: Rick Thomas <ihnp4!btlunix!rbt> 20224# (xtalk: I added <rmam>/<smam> based on the init string. 20225xtalk|IBM PC with xtalk communication program (versions up to 3.4), 20226 am, mir, msgr, xon, 20227 cols#80, it#8, lines#24, vt#3, xmc#1, 20228 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20229 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H, 20230 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, 20231 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 20232 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, 20233 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, 20234 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, 20235 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 20236 rmkx=\E[?1l\E>, rmso=\E[m\s, 20237 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, 20238 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, 20239 tbc=\E[3g, use=vt100+fnkeys, 20240 20241# The official PC terminal emulator program of the AT&T Product Centers. 20242# Note - insert mode commented out - doesn't seem to work on AT&T PC. 20243simterm|attpc running simterm, 20244 am, 20245 cols#80, lines#24, 20246 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 20247 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER, 20248 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE, 20249 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB, 20250 20251#### Daisy wheel printers 20252# 20253# This section collects Diablo, DTC, Xerox, Qume, and other daisy 20254# wheel terminals. These are now largely obsolete. 20255# 20256 20257# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr) 20258diablo1620|diablo1720|diablo450|ipsi|diablo 1620, 20259 hc, os, 20260 cols#132, it#8, 20261 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c, 20262 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2, 20263diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin, 20264 cols#124, 20265 is2=\r \E9, use=diablo1620, 20266# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr) 20267diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640, 20268 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, 20269 use=diablo1620, 20270# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such 20271# file -- esr) 20272diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin, 20273 cols#124, 20274 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, 20275diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer, 20276 use=diablo1640-lm, 20277# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout 20278# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>. 20279# The terminal has tabs, but I'm getting tired of fighting the braindamage. 20280# If no tab is set or the terminal's in a bad mood, it glitches the screen 20281# around all of memory. Note that return puts a blank ("a return character") 20282# in the space the cursor was at, so we use ^P return (and thus ^P newline for 20283# newline). Note also that if you turn off :pt: and let Unix expand tabs, 20284# curses won't work (some old BSD versions) because it doesn't clear this bit, 20285# and cursor addressing sends a tab for row/column 9. What a losing terminal! 20286# I have been unable to get tabs set in all 96 lines - it always leaves at 20287# least one line with no tabs in it, and once you tab through that line, 20288# it completely weirds out. 20289# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr) 20290dtc382|DTC 382, 20291 am, da, db, xhp, 20292 cols#80, lines#24, lm#96, 20293 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H, 20294 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB, 20295 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U, 20296 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi, 20297 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P, 20298dtc300s|DTC 300s, 20299 hc, os, 20300 cols#132, 20301 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 20302 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 20303gsi|mystery gsi terminal, 20304 hc, os, 20305 cols#132, 20306 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH, 20307 ind=^J, 20308aj830|aj832|aj|anderson jacobson, 20309 hc, os, 20310 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 20311 ind=^J, 20312# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST 20313aj510|Anderson-Jacobson model 510, 20314 am, mir, 20315 cols#80, lines#24, 20316 clear=^L, cub1=^H, cuf1=\EX, 20317 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY, 20318 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=, 20319 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ, 20320 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J, 20321 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I, 20322 smul=\E"U, 20323# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 20324# This is incomplete, but it's a start. 20325nec5520|nec|spinwriter|nec 5520, 20326 hc, os, 20327 cols#132, it#8, 20328 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L, 20329 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J, 20330 kbs=^H, tbc=\E3, 20331qume5|qume|Qume Sprint 5, 20332 hc, os, 20333 cols#80, it#8, 20334 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 20335 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 20336# I suspect the xerox 1720 is the same as the diablo 1620. 20337xerox1720|x1720|x1750|xerox 1720, 20338 hc, os, 20339 cols#132, it#8, 20340 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J, 20341 tbc=\E2, 20342 20343#### Miscellaneous obsolete terminals, manufacturers unknown 20344# 20345# If you have any information about these (like, a manufacturer's name, 20346# and a date on the serial-number plate) please send it! 20347 20348cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, 20349 OTbs, am, 20350 cols#73, lines#36, 20351 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, 20352cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, 20353 OTbs, am, 20354 cols#85, lines#39, 20355 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, 20356 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7, 20357 kf4=\E8, rmso=\Em^C, smso=\Em^L, 20358cops10|cops|cops-10|cops 10, 20359 am, bw, 20360 cols#80, lines#24, 20361 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 20362 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V, 20363 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 20364 khome=^Y, 20365# (d132: removed duplicate :ic=\E5:, 20366# merged in capabilities from a BRL entry -- esr) 20367d132|datagraphix|datagraphix 132a, 20368 da, db, in, 20369 cols#80, lines#30, 20370 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J, 20371 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, 20372 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H, 20373 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew, 20374# The d800 was an early portable terminal from c.1984-85 that looked a lot 20375# like the original Compaq `lunchbox' portable (but no handle). It had a vt220 20376# mode (which is what this entry looks like) and several other lesser-known 20377# emulations. 20378d800|Direct 800/A, 20379 OTbs, am, da, db, msgr, xhp, 20380 cols#80, it#8, lines#24, 20381 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 20382 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H, 20383 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 20384 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D, 20385 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 20386 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 20387 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 20388 smacs=\E[1m, smso=\E[7m, smul=\E[4m, 20389digilog|digilog 333, 20390 OTbs, 20391 cols#80, lines#16, 20392 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X, 20393 home=^N, ind=^J, 20394# The DWK was a terminal manufactured in the Soviet Union c.1986 20395dwk|dwk-vt|dwk terminal, 20396 am, 20397 cols#80, it#8, lines#24, 20398 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_, 20399 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 20400 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 20401 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177, 20402 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, 20403 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5, 20404 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh, 20405 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX, 20406 sgr0=\EX, smacs=\EF, smso=\ET, 20407env230|envision230|envision 230 graphics terminal, 20408 xenl@, 20409 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 20410 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 20411 use=vt100, 20412# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic 20413# coupler attached, the whole rig fitting in a suitcase and more or less 20414# portable. Hot stuff for c.1977 :-) -- esr 20415ep48|ep4080|execuport 4080, 20416 OTbs, am, os, 20417 cols#80, 20418 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, 20419ep40|ep4000|execuport 4000, 20420 cols#136, use=ep4080, 20421# Adam Thompson <athompso@pangea.ca> tells us: 20422# Informer series - these are all portable units, resembling older 20423# automatic bread-baking machines. The terminal looks like a `clamshell' 20424# design, but isn't. The structure is similar to the Direct terminals, 20425# but only half the width. The entire unit is only about 10" wide. 20426# It features an 8" screen (6" or 7" if you have color!), and an 9"x6" 20427# keyboard. All the keys are crammed together, much like some laptop 20428# PCs today, but perhaps less well organized...all these units have a 20429# bewildering array of plugs on the back, including a built-in modem. 20430# The 305 was a color version of the 304; the 306 and 307 were mono and 20431# color terminals built for IBM bisync protocols. 20432# From: Paul Leondis <unllab@amber.berkeley.edu> 20433ifmr|Informer D304, 20434 OTbs, am, 20435 cols#80, lines#24, 20436 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC, 20437 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\, 20438 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK, 20439 smso=\EJ, 20440# Entry largely based on wy60 and has the features of wy60ak. 20441opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys, 20442 am, bw, hs, km, mir, msgr, ul, xon, 20443 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80, 20444 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 20445 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M, 20446 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K, 20447 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r, 20448 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>, 20449 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J, 20450 ip=$<3>, 20451 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12, 20452 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B, 20453 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY, 20454 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, 20455 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 20456 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 20457 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 20458 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 20459 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>, 20460 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 20461 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 20462 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 20463 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11, 20464 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>, 20465 rs3=\EwG\Ee($<150>, 20466 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 20467 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/, 20468 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177, 20469 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(, 20470 uc=\EG8\EG0, use=adm+sgr, 20471teletec|Teletec Datascreen, 20472 OTbs, am, 20473 cols#80, lines#24, 20474 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K, 20475 home=^^, ind=^J, 20476# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu> 20477# This description is for the LANPAR Technologies VISION 3220 20478# terminal from 1984/85. The function key definitions k0-k5 represent the 20479# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, 20480# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. 20481# 20482# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998: 20483# I had a couple of scopes (3221) like this once where I used to work, around 20484# the 1987 time frame if memory serves me correctly. These scopes were made 20485# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 20486# compatible. The 3220 was a plain text terminal like the VT-220, the 3221 20487# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 20488# was like the VT-241 (color with Regis + Sixel Graphics). These terminals 20489# (3221) cost about $1500 each, and one was always broken -- had to be sent 20490# back to the shop for repairs. 20491# The only real advantage these scopes had over the VT-240's were: 20492# 1) They were faster in the Regis display, or at least the ones I did 20493# 2) They had a handy debugging feature where you could split-screen the 20494# scope, the graphics would appear on the top, and the REGIS commands would 20495# appear on the bottom. I don't remember the VT-240s being able to do that. 20496# I would swear that LANPAR Technologies was in MA someplace, but since I 20497# don't work at the same place anymore, and those terminals and manuals were 20498# long since junked, I cannot be any more sure than that. 20499# 20500# (v3220: removed obsolete ":kn#10:", 20501# I added <rmam>/<smam> based on the init string -- esr) 20502v3220|LANPAR Vision II model 3220/3221/3222, 20503 OTbs, am, mir, xenl, 20504 cols#80, it#8, lines#24, 20505 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C, 20506 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 20507 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, 20508 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B, 20509 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, 20510 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, 20511 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l, 20512 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 20513 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 20514######## ICH/ICH1 VERSUS RMIR/SMIR 20515# 20516# Some non-curses applications get confused if both ich/ich1 and rmir/smir 20517# are present; the symptom is doubled characters in an update using insert. 20518# These applications are technically correct; in both 4.3BSD termcap and 20519# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir 20520# unless the terminal needs both. To my knowledge, no terminal still in this 20521# file requires both other than the very obsolete dm2500. 20522# 20523# For ncurses-based applications this is not a problem, as ncurses uses 20524# one or the other as appropriate but never mixes the two. Therefore we 20525# have not corrected entries like `linux' and `xterm' that specify both. 20526# If you see doubled characters from these, use the linux-nic and xterm-nic 20527# entries that suppress ich/ich1. And upgrade to ncurses! 20528# 20529 20530######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS 20531# 20532# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and 20533# ECMA-48 standards are said to be almost identical, but are not the same 20534# as X3.64 (though for practical purposes they are close supersets of it). 20535# 20536# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch 20537# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for 20538# Coded Character Sets"), include your snail-mail address, and you should 20539# receive the document in due course. Don't expect an email acknowledgement. 20540# 20541# Related standards include "X3.4-1977: American National Standard Code for 20542# Information Interchange" (the ASCII standard) and "X3.41.1974: 20543# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of 20544# American National Standard for Information Interchange." I believe (but 20545# am not certain) that these are effectively identical to ECMA-6 and ECMA-35 20546# respectively. 20547# 20548 20549#### VT100/ANSI/ECMA-48 20550# 20551# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals 20552# and ECMA-48 Control Functions for Coded Character Sets. 20553# 20554# Much of the content of this comment is adapted from a table prepared by 20555# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, 20556# discussion of some terminfo-related issues, and updates to capture ECMA-48 20557# have been added. Control functions described in ECMA-48 only are tagged 20558# with * after their names. 20559# 20560# The table is a complete list of the defined ANSI X3.64/ECMA-48 control 20561# sequences. In the main table, \E stands for an escape (\033) character, 20562# SPC for space. Pn stands for a single numeric parameter to be inserted 20563# in decimal ASCII. Ps stands for a list of such parameters separated by 20564# semicolons. Parameter meanings for most parametrized sequences are 20565# decribed in the notes. 20566# 20567# Sequence Sequence Parameter or 20568# Mnemonic Name Sequence Value Mode terminfo 20569# ----------------------------------------------------------------------------- 20570# APC Applicatn Program Command \E _ - Delim - 20571# BEL Bell * ^G - - bel 20572# BPH Break Permitted Here * \E B - * - 20573# BS Backpace * ^H - EF - 20574# CAN Cancel * ^X - - - (A) 20575# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt 20576# CCH Cancel Previous Character \E T - - - 20577# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B) 20578# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C) 20579# CMD Coding Method Delimiter * \E 20580# CNL Cursor Next Line \E [ Pn E 1 eF nel (D) 20581# CPL Cursor Preceding Line \E [ Pn F 1 eF - 20582# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E) 20583# CSI Control Sequence Intro \E [ - Intro - 20584# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F) 20585# CUB Cursor Backward \E [ Pn D 1 eF cub 20586# CUD Cursor Down \E [ Pn B 1 eF cud 20587# CUF Cursor Forward \E [ Pn C 1 eF cuf 20588# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G) 20589# CUU Cursor Up \E [ Pn A 1 eF cuu 20590# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H) 20591# DA Device Attributes \E [ Pn c 0 - - 20592# DAQ Define Area Qualification \E [ Ps o 0 - - 20593# DCH Delete Character \E [ Pn P 1 eF dch 20594# DCS Device Control String \E P - Delim - 20595# DL Delete Line \E [ Pn M 1 eF dl 20596# DLE Data Link Escape * ^P - - - 20597# DMI Disable Manual Input \E \ - Fs - 20598# DSR Device Status Report \E [ Ps n 0 - - (I) 20599# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC - 20600# EA Erase in Area \E [ Ps O 0 eF - (J) 20601# ECH Erase Character \E [ Pn X 1 eF ech 20602# ED Erase in Display \E [ Ps J 0 eF ed (J) 20603# EF Erase in Field \E [ Ps N 0 eF - 20604# EL Erase in Line \E [ Ps K 0 eF el (J) 20605# EM End of Medium * ^Y - - - 20606# EMI Enable Manual Input \E b Fs - 20607# ENQ Enquire ^E - - - 20608# EOT End Of Transmission ^D - * - 20609# EPA End of Protected Area \E W - - - (K) 20610# ESA End of Selected Area \E G - - - 20611# ESC Escape ^[ - - - 20612# ETB End Transmission Block ^W - - - 20613# ETX End of Text ^C - - - 20614# FF Form Feed ^L - - - 20615# FNK Function Key * \E [ Pn SPC W - - - 20616# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - - 20617# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - 20618# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L) 20619# GSS Graphic Size Selection \E [ Pn SPC C none FE - 20620# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B) 20621# HPB Char Position Backward \E [ j 1 FE - 20622# HPR Horz Position Relative \E [ Pn a 1 FE - (M) 20623# HT Horizontal Tab * ^I - FE - (N) 20624# HTJ Horz Tab w/Justification \E I - FE - 20625# HTS Horizontal Tab Set \E H - FE hts 20626# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G) 20627# ICH Insert Character \E [ Pn @ 1 eF ich 20628# IDCS ID Device Control String \E [ SPC O - * - 20629# IGS ID Graphic Subrepertoire \E [ SPC M - * - 20630# IL Insert Line \E [ Pn L 1 eF il 20631# IND Index \E D - FE - 20632# INT Interrupt \E a - Fs - 20633# JFY Justify \E [ Ps SPC F 0 FE - 20634# IS1 Info Separator #1 * ^_ - * - 20635# IS2 Info Separator #1 * ^^ - * - 20636# IS3 Info Separator #1 * ^] - * - 20637# IS4 Info Separator #1 * ^\ - * - 20638# LF Line Feed ^J - - - 20639# LS1R Locking Shift Right 1 * \E ~ - - - 20640# LS2 Locking Shift 2 * \E n - - - 20641# LS2R Locking Shift Right 2 * \E } - - - 20642# LS3 Locking Shift 3 * \E o - - - 20643# LS3R Locking Shift Right 3 * \E | - - - 20644# MC Media Copy \E [ Ps i 0 - - (S) 20645# MW Message Waiting \E U - - - 20646# NAK Negative Acknowledge * ^U - * - 20647# NBH No Break Here * \E C - - - 20648# NEL Next Line \E E - FE nel (D) 20649# NP Next Page \E [ Pn U 1 eF - 20650# NUL Null * ^@ - - - 20651# OSC Operating System Command \E ] - Delim - 20652# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - - 20653# PFS Page Format Selection * \E Pn SPC J 0 - - 20654# PLD Partial Line Down \E K - FE - (T) 20655# PLU Partial Line Up \E L - FE - (U) 20656# PM Privacy Message \E ^ - Delim - 20657# PP Preceding Page \E [ Pn V 1 eF - 20658# PPA Page Position Absolute * \E [ Pn SPC P 1 FE - 20659# PPB Page Position Backward * \E [ Pn SPC R 1 FE - 20660# PPR Page Position Forward * \E [ Pn SPC Q 1 FE - 20661# PTX Parallel Texts * \E [ \ - - - 20662# PU1 Private Use 1 \E Q - - - 20663# PU2 Private Use 2 \E R - - - 20664# QUAD Typographic Quadding \E [ Ps SPC H 0 FE - 20665# REP Repeat Char or Control \E [ Pn b 1 - rep 20666# RI Reverse Index \E M - FE - (V) 20667# RIS Reset to Initial State \E c - Fs - 20668# RM Reset Mode * \E [ Ps l - - - (W) 20669# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - - 20670# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X) 20671# SCI Single-Char Introducer \E Z - - - 20672# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - - 20673# SCS Set Char. Spacing * \E [ Pn SPC g - - - 20674# SD Scroll Down \E [ Pn T 1 eF rin 20675# SDS Start Directed String * \E [ Pn ] 1 - - 20676# SEE Select Editing Extent \E [ Ps Q 0 - - (Y) 20677# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - - 20678# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O) 20679# SHS Select Char. Spacing * \E [ Ps SPC K 0 - - 20680# SI Shift In ^O - - - (P) 20681# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - - 20682# SL Scroll Left \E [ Pn SPC @ 1 eF - 20683# SLH Set Line Home * \E [ Pn SPC U - - - 20684# SLL Set Line Limit * \E [ Pn SPC V - - - 20685# SLS Set Line Spacing * \E [ Pn SPC h - - - 20686# SM Select Mode \E [ Ps h none - - (W) 20687# SO Shift Out ^N - - - (Q) 20688# SOH Start Of Heading * ^A - - - 20689# SOS Start of String * \E X - - - 20690# SPA Start of Protected Area \E V - - - (Z) 20691# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - - 20692# SPH Set Page Home * \E [ Ps SPC G - - - 20693# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - 20694# SPL Set Page Limit * \E [ Ps SPC j - - - 20695# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - - 20696# SR Scroll Right \E [ Pn SPC A 1 eF - 20697# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - - 20698# SRS Start Reversed String * \E [ Ps [ 0 - - 20699# SSA Start of Selected Area \E F - - - 20700# SSU Select Size Unit * \E [ Pn SPC I 0 - - 20701# SSW Set Space Width * \E [ Pn SPC [ none - - 20702# SS2 Single Shift 2 (G2 set) \E N - Intro - 20703# SS3 Single Shift 3 (G3 set) \E O - Intro - 20704# ST String Terminator \E \ - Delim - 20705# STAB Selective Tabulation * \E [ Pn SPC ^ - - - 20706# STS Set Transmit State \E S - - - 20707# STX Start pf Text * ^B - - - 20708# SU Scroll Up \E [ Pn S 1 eF indn 20709# SUB Substitute * ^Z - - - 20710# SVS Select Line Spacing * \E [ Pn SPC \ 1 - - 20711# SYN Synchronous Idle * ^F - - - 20712# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - - 20713# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - - 20714# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - - 20715# TBC Tab Clear \E [ Ps g 0 FE tbc 20716# TCC Tabul. Centered on Char * \E [ Pn SPC c - - - 20717# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE - 20718# TSS Thin Space Specification \E [ Pn SC E none FE - 20719# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa 20720# VPB Line Position Backward * \E [ Pn k 1 FE - 20721# VPR Vert. Position Relative \E [ Pn e 1 FE - (R) 20722# VT Vertical Tabulation * ^K - FE - 20723# VTS Vertical Tabulation Set \E J - FE - 20724# 20725# --------------------------------------------------------------------------- 20726# 20727# Notes: 20728# 20729# Some control characters are listed in the ECMA-48 standard without 20730# being assigned functions relevant to terminal control there (they 20731# referred to other standards such as ISO 1745 or ECMA-35). They are listed 20732# here anyway for completeness. 20733# 20734# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation. 20735# 20736# (B) There seems to be some confusion abroad between CHA and HPA. Most 20737# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls 20738# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but 20739# preserved the CHA abbreviation. 20740# 20741# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I. 20742# Occasionally (as on, for example, certain HP terminals) this has the HTJ 20743# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the 20744# CHT abbreviation. 20745# 20746# (D) terminfo (nel) is usually \r\n rather than ANSI \EE. 20747# 20748# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR 20749# abbreviation. 20750# 20751# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear 20752# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, 20753# 5 = clear all char tabs, 6 = clear all line tabs. 20754# 20755# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept 20756# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character 20757# Position Absolute" but retains the HVP abbreviation. 20758# 20759# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT 20760# abbreviation. 20761# 20762# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR 20763# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request 20764# DSR, 6 = request CPR response. 20765# 20766# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end, 20767# 1 = clear from beginning, 2 = clear. 20768# 20769# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. 20770# 20771# (L) The GSM parameters are vertical and horizontal parameters to scale by. 20772# 20773# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals 20774# use CUF for this function and ignore HPR. ECMA-48 calls this "Character 20775# Position Relative" but retains the HPR abbreviation. 20776# 20777# (N) ECMA-48 calls this "Character Tabulation" but retains the HT 20778# abbreviation. 20779# 20780# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold, 20781# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink, 20782# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion), 20783# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur, 20784# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4, 20785# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off 20786# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow 20787# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set 20788# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg 20789# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg, 20790# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set 20791# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 = 20792# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved, 20793# 61-65 = variable highlights for ideograms. 20794# 20795# (P) SI is also called LSO, Locking Shift Zero. 20796# 20797# (Q) SI is also called LS1, Locking Shift One. 20798# 20799# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals 20800# use CUD for this function and ignore VPR. ECMA calls it `Line Position 20801# Absolute' but retains the VPA abbreviation. 20802# 20803# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from 20804# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer 20805# from secondary aux device, 4 = stop relay to primary aux device, 5 = 20806# start relay to primary aux device, 6 = stop relay to secondary aux device, 20807# 7 = start relay to secondary aux device. 20808# 20809# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD 20810# abbreviation. 20811# 20812# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU 20813# abbreviation. 20814# 20815# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. 20816# 20817# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM), 20818# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), 20819# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM), 20820# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional 20821# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), 20822# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM), 20823# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), 20824# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer 20825# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer 20826# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed 20827# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 = 20828# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed 20829# from ECMA-48's 5th edition but are listed here for reference. 20830# 20831# (X) Select Alternate Presentation Variants is used only for non-Latin 20832# alphabets. 20833# 20834# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM). 20835# 20836# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA 20837# abbreviation. 20838# 20839# --------------------------------------------------------------------------- 20840# 20841# Abbreviations: 20842# 20843# Intro an Introducer of some kind of defined sequence; the normal 7-bit 20844# X3.64 Control Sequence Introducer is the two characters "Escape [" 20845# 20846# Delim a Delimiter 20847# 20848# x/y identifies a character by position in the ASCII table (column/row) 20849# 20850# eF editor function (see explanation) 20851# 20852# FE format effector (see explanation) 20853# 20854# F is a Final character in 20855# an Escape sequence (F from 3/0 to 7/14 in the ASCII table) 20856# a control sequence (F from 4/0 to 7/14) 20857# 20858# Gs is a graphic character appearing in strings (Gs ranges from 20859# 2/0 to 7/14) in the ASCII table 20860# 20861# Ce is a control represented as a single bit combination in the C1 set 20862# of controls in an 8-bit character set 20863# 20864# C0 the familiar set of 7-bit ASCII control characters 20865# 20866# C1 roughly, the set of control chars available only in 8-bit systems. 20867# This is too complicated to explain fully here, so read Jim Fleming's 20868# article in the February 1983 BYTE, especially pages 214 through 224. 20869# 20870# Fe is a Final character of a 2-character Escape sequence that has an 20871# equivalent representation in an 8-bit environment as a Ce-type 20872# (Fe ranges from 4/0 to 5/15) 20873# 20874# Fs is a Final character of a 2-character Escape sequence that is 20875# standardized internationally with identical representation in 7-bit 20876# and 8-bit environments and is independent of the currently 20877# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) 20878# 20879# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the 20880# ASCII table 20881# 20882# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII 20883# table 20884# 20885# Pn is a numeric parameter in a control sequence, a string of zero or 20886# more characters ranging from 3/0 to 3/9 in the ASCII table 20887# 20888# Ps is a variable number of selective parameters in a control sequence 20889# with each selective parameter separated from the other by the code 20890# 3/11 (which usually represents a semicolon); Ps ranges from 20891# 3/0 to 3/9 and includes 3/11 20892# 20893# * Not relevant to terminal control, listed for completeness only. 20894# 20895# Format Effectors versus Editor Functions 20896# 20897# A format effector specifies how following output is to be displayed. 20898# An editor function allows you to modify the display. Informally 20899# format effectors may be destructive; format effectors should not be. 20900# 20901# For instance, a format effector that moves the "active position" (the 20902# cursor or equivalent) one space to the left would be useful when you want to 20903# create an overstrike, a compound character made of two standard characters 20904# overlaid. Control-H, the Backspace character, is actually supposed to be a 20905# format effector, so you can do this. But many systems use it in a 20906# nonstandard fashion, as an editor function, deleting the character to the 20907# left of the cursor and moving the cursor left. When Control-H is assumed to 20908# be an editor function, you cannot predict whether its use will create an 20909# overstrike unless you also know whether the output device is in an "insert 20910# mode" or an "overwrite mode". When Control-H is used as a format effector, 20911# its effect can always be predicted. The familiar characters carriage 20912# return, linefeed, formfeed, etc., are defined as format effectors. 20913# 20914# NOTES ON THE DEC VT100 IMPLEMENTATION 20915# 20916# Control sequences implemented in the VT100 are as follows: 20917# 20918# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, 20919# LNM, NEL, RI, RIS, RM, SGR, SM, TBC 20920# 20921# plus several private DEC commands. 20922# 20923# Erasing parts of the display (EL and ED) in the VT100 is performed thus: 20924# 20925# Erase from cursor to end of line Esc [ 0 K or Esc [ K 20926# Erase from beginning of line to cursor Esc [ 1 K 20927# Erase line containing cursor Esc [ 2 K 20928# Erase from cursor to end of screen Esc [ 0 J or Esc [ J 20929# Erase from beginning of screen to cursor Esc [ 1 J 20930# Erase entire screen Esc [ 2 J 20931# 20932# Some brain-damaged terminal/emulators respond to Esc [ J as if it were 20933# Esc [ 2 J, but this is wrong; the default is 0. 20934# 20935# The VT100 responds to receiving the DA (Device Attributes) control 20936# 20937# Esc [ c (or Esc [ 0 c) 20938# 20939# by transmitting the sequence 20940# 20941# Esc [ ? l ; Ps c 20942# 20943# where Ps is a character that describes installed options. 20944# 20945# The VT100's cursor location can be read with the DSR (Device Status 20946# Report) control 20947# 20948# Esc [ 6 n 20949# 20950# The VT100 reports by transmitting the CPR sequence 20951# 20952# Esc [ Pl ; Pc R 20953# 20954# where Pl is the line number and Pc is the column number (in decimal). 20955# 20956# The specification for the DEC VT100 is document EK-VT100-UG-003. 20957 20958#### ANSI.SYS 20959# 20960# Here is a description of the color and attribute controls supported in the 20961# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI 20962# terminal emulators for Intel boxes obey these. They are a proper subset 20963# of the ECMA-48 escapes. 20964# 20965# 0 all attributes off 20966# 1 foreground bright 20967# 4 underscore on 20968# 5 blink on/background bright (not reliable with brown) 20969# 7 reverse-video 20970# 8 set blank (non-display) 20971# 10 set primary font 20972# 11 set first alternate font (on PCs, display ROM characters 1-31) 20973# 12 set second alternate font (on PCs, display IBM high-half chars) 20974# 20975# Color attribute sets 20976# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, 20977# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white 20978# Bright black becomes gray. Bright brown becomes yellow, 20979# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard. 20980# 20981# * If the 5 attribute is on and you set a background color (40-47) it is 20982# supposed to enable bright background. 20983# 20984# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing 20985# when you try to set a "bright brown" (yellow) background with attribute 20986# 5 (you get a blinking yellow foreground instead). A few displays 20987# (including the System V console) support an attribute 6 that undoes this 20988# braindamage (this is required by iBCS2). 20989# 20990# * Some older versions of ANSI.SYS have a bug that causes thems to require 20991# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48 20992# compatible.) 20993 20994#### Intel Binary Compatibility Standard 20995# 20996# For comparison, here are the capabilities implied by the Intel Binary 20997# Compatibility Standard for UNIX systems (Intel order number 468366-001). 20998# These recommendations are optional. IBCS2 allows the leading escape to 20999# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with 21000# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities 21001# (as described in figure 9-3 of the standard). Those expressed in the ibcs2 21002# terminfo entry are followed with the corresponding capability in parens: 21003# 21004# CSI <n>k disable (n=0) or enable (n=1) keyclick 21005# CSI 2h lock keyboard 21006# CSI 2i send screen as input 21007# CSI 2l unlock keyboard 21008# CSI 6m enable background color intensity 21009# CSI <0-2>c reserved 21010# CSI <0-59>m select graphic rendition 21011# CSI <n>;<m>H (cup) cursor to line n and column m 21012# CSI <n>;<m>f cursor to line n and column m 21013# CSI <n>@ (ich) insert characters 21014# CSI <n>A (cuu) cursor up n lines 21015# CSI <n>B (cud) cursor down n lines 21016# CSI <n>C (cuu) cursor right n characters 21017# CSI <n>D (cud) cursor left n characters 21018# CSI <n>E cursor down n lines and in first column 21019# CSI <n>F cursor up n lines and in first column 21020# CSI <n>G (hpa) position cursor at column n-1 21021# CSI <n>J (ed) erase in display 21022# CSI <n>K (el) erase in line 21023# CSI <n>L (il) insert line(s) 21024# CSI <n>P (dch) delete characters 21025# CSI <n>S (indn) scroll up n lines 21026# CSI <n>T (rin) scroll down n lines 21027# CSI <n>X (ech) erase characters 21028# CSI <n>Z (cbt) back up n tab stops 21029# CSI <n>` cursor to column n on line 21030# CSI <n>a (cuu) cursor right n characters 21031# CSI <n>d (vpa) cursor to line n 21032# CSI <n>e cursor down n lines and in first column 21033# CSI <n>g (cbt) clear all tabs 21034# CSI <n>z make virtual terminal n active 21035# CSI ?7h (smam) turn automargin on 21036# CSI ?7l (rmam) turn automargin off 21037# CSI s save cursor position 21038# CSI u restore cursor position to saved value 21039# CSI =<c>A set overscan color 21040# CSI =<c>F set normal foreground color 21041# CSI =<c>G set normal background color 21042# CSI =<c>H set reverse foreground color 21043# CSI =<c>I set reverse foreground color 21044# CSI =<c>J set graphic foreground color 21045# CSI =<c>K set graphic foreground color 21046# CSI =<n>g (dispc) display n from alternate graphics character set 21047# CSI =<p>;<d>B set bell parameters 21048# CSI =<s>;<e>C set cursor parameters 21049# CSI =<x>D enable/disable intensity of background color 21050# CSI =<x>E set/clear blink vs. bold background 21051# CSI 7 (sc) (sc) save cursor position 21052# CSI 8 (rc) (rc) restore cursor position to saved value 21053# CSI H (hts) (hts) set tab stop 21054# CSI Q<n><string> define function key string 21055# (string must begin and end with delimiter char) 21056# CSI c (clear) clear screen 21057# 21058# The lack of any specification for attributes in SGR (among other things) 21059# makes this a wretchedly weak standard. The table above is literally 21060# everything iBSC2 has to say about terminal escape sequences; there is 21061# no further discussion of their meaning or how to set the parameters 21062# in these sequences at all. 21063# 21064 21065######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE 21066# 21067# The historical termcap file entries were written primarily in 4.4BSD termcap. 21068# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, 21069# with the extension names chosen for compatibility with the termcap names 21070# assigned in System V terminfo. There are some variant extension sets out 21071# there. We try to describe them here. 21072# 21073# XENIX extensions: 21074# 21075# The XENIX extensions include a set of function-key capabilities as follows: 21076# 21077# code XENIX variable name terminfo name name clashes? 21078# ---- ------------------- ------------- ----------------------- 21079# CL key_char_left 21080# CR key_char_right 21081# CW key_change_window create_window 21082# EN key_end kend 21083# HM key_home khome 21084# HP ?? 21085# LD key_delete_line kdl1 21086# LF key_linefeed label_off 21087# NU key_next_unlocked_cell 21088# PD key_page_down knp 21089# PL ?? 21090# PN start_print mc5 21091# PR ?? 21092# PS stop_print mc4 21093# PU key_page_up kpp pulse 21094# RC key_recalc remove_clock 21095# RF key_toggle_ref req_for_input 21096# RT key_return kent 21097# UP key_up_arrow kcuu1 parm_up_cursor 21098# WL key_word_left 21099# WR key_word_right 21100# 21101# The XENIX extensions also include the following character-set and highlight 21102# capabilities: 21103# 21104# XENIX terminfo function 21105# ----- -------- ------------------------------ 21106# GS smacs start alternate character set 21107# GE rmacs end alternate character set 21108# GG :as:/:ae: glitch (analogous to :sg:/:ug:) 21109# bo blink begin blink (not used in /etc/termcap) 21110# be end blink (not used in /etc/termcap) 21111# bb blink glitch (not used in /etc/termcap) 21112# it dim begin dim (not used in /etc/termcap) 21113# ie end dim (not used in /etc/termcap) 21114# ig dim glitch (not used in /etc/termcap) 21115# 21116# Finally, XENIX also used the following forms-drawing capabilities: 21117# 21118# single double type ASCII approximation 21119# ------ ------ ------------- ------------------- 21120# GV Gv vertical line | 21121# GH Gv horizontal line - _ 21122# G1 G5 top right corner _ | 21123# G2 G6 top left corner | 21124# G3 G7 bottom left corner |_ 21125# G4 G8 bottom right corner _| 21126# GD Gd down-tick character T 21127# GL Gl left-tick character -| 21128# GR Gr right-tick character |- 21129# GC Gc middle intersection -|- 21130# GU Gu up-tick character _|_ 21131# 21132# These were invented to take advantage of the IBM PC ROM character set. One 21133# can compose an acsc string from the single-width characters as follows 21134# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}" 21135# When translating a termcap file, ncurses tic will do this automatically. 21136# The double forms characters don't fit the SVr4 terminfo model. 21137# 21138# AT&T Extensions: 21139# 21140# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of 21141# nonstandard capabilities. Its signature is the KM capability, used to name 21142# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this 21143# set. Comments in the original, and a little cross-checking with other AT&T 21144# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: 21145# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), 21146# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make 21147# cursor invisible), and CV=:ve: (make cursor normal). 21148# 21149# HP Extensions 21150# 21151# The HP library (as of mid-1995, their term.h file version 70.1) appears to 21152# have the System V capabilities up to SVr1 level. After that, it supports 21153# two nonstandard caps meml and memu corresponding to the old termcap :ml:, 21154# :mu: capabilities. After that, it supports caps plab_norm, label_on, 21155# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the 21156# HP binary format incompatible with SVr4's. 21157# 21158# IBM Extensions 21159# 21160# There is a set of nonstandard terminfos used by IBM's AIX operating system. 21161# The AIX terminfo library diverged from SVr1 terminfo, and replaces all 21162# capabilities following prtr_non with the following special capabilties: 21163# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab, 21164# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr, 21165# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml, 21166# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents: 21167# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be 21168# renamed (to kcbt and kslt). The places in the box[12] capabilities 21169# correspond to acsc chars, here is the mapping: 21170# 21171# box1[0] = ACS_ULCORNER 21172# box1[1] = ACS_HLINE 21173# box1[2] = ACS_URCORNER 21174# box1[3] = ACS_VLINE 21175# box1[4] = ACS_LRCORNER 21176# box1[5] = ACS_LLCORNER 21177# box1[6] = ACS_TTEE 21178# box1[7] = ACS_RTEE 21179# box1[8] = ACS_BTEE 21180# box1[9] = ACS_LTEE 21181# box1[10] = ACS_PLUS 21182# 21183# The box2 characters are the double-line versions of these forms graphics. 21184# The AIX binary terminfo format is incompatible with SVr4's. 21185# 21186# Iris console extensions: 21187# 21188# HS is half-intensity start; HE is half-intensity end 21189# CT is color terminal type (for Curses & rogue) 21190# CP is color change escape sequence 21191# CZ are color names (for Curses & rogue) 21192# 21193# The ncurses tic utility recognizes HS as an alias for mh <dim>. 21194# 21195# TC Extensions: 21196# 21197# There is a set of extended termcaps associated with something 21198# called the "Terminal Control" or TC package created by MainStream Systems, 21199# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses 21200# CF for civis and CO for cvvis. Finally, they define a boolean :ct: 21201# that flags color terminals. 21202# 21203######## CHANGE HISTORY 21204# 21205# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. 21206# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses 21207# project. 21208# 21209# This file contains all the capability information present in John Kunze's 21210# last version of the termcap master file, except as noted in the change 21211# comments at end of file. Some information about very ancient obsolete 21212# capabilities has been moved to comments. Some all-numeric names of older 21213# terminals have been retired. 21214# 21215# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some 21216# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer 21217# used by BSD curses. 21218# 21219# The 9.1.0 version of this file was translated from my lightly-edited copy of 21220# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for 21221# the purpose. Unless the ncurses tic implementation and the Lisp code were 21222# making perfectly synchronized mistakes which I then failed to catch by 21223# eyeball, the translation was correct and perfectly information-preserving. 21224# 21225# Major version number bumps correspond to major version changes in ncurses. 21226# 21227# Here is a log of the changes since then: 21228# 21229# 9.1.0 (Wed Feb 1 04:50:32 EST 1995): 21230# * First terminfo master translated from 8.3. 21231# 9.2.0 (Wed Feb 1 12:21:45 EST 1995): 21232# * Replaced Wyse entries with updated entries supplied by vendor. 21233# 21234# 9.3.0 (Mon Feb 6 19:14:40 EST 1995): 21235# * Added contact & status info from G. Clark Brown <clark@sssi.com>. 21236# 9.3.1 (Tue Feb 7 12:00:24 EST 1995): 21237# * Better XENIX keycap translation. Describe TC termcaps. 21238# * Contact and history info supplied by Qume. 21239# 9.3.2 (Sat Feb 11 23:40:02 EST 1995): 21240# * Raided the Shuford FTP site for recent termcaps/terminfos. 21241# * Added information on X3.64 and VT100 standard escape sequences. 21242# 9.3.3 (Mon Feb 13 12:26:15 EST 1995): 21243# * Added a correct X11R6 xterm entry. 21244# * Fixed terminfo translations of padding. 21245# 9.3.4 (Wed Feb 22 19:27:34 EST 1995): 21246# * Added correct acsc/smacs/rmacs strings for vt100 and xterm. 21247# * Added u6/u7/u8/u9 capabilities. 21248# * Added PCVT entry. 21249# 9.3.5 (Thu Feb 23 09:37:12 EST 1995): 21250# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry 21251# to use reverse-video standout so Emacs will look right. 21252# * Added el1 capability to ansi. 21253# * Added smacs/rmacs to ansi.sys. 21254# 21255# 9.4.0 (Sat Feb 25 16:43:25 EST 1995): 21256# * New mt70 entry. 21257# * Added COPYRIGHTS AND OTHER DELUSIONS. 21258# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics 21259# smartvid & smarterm, ampex 175 & 219 & 232, 21260# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, 21261# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, 21262# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, 21263# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. 21264# * Replaced the Perkin-Elmer entries with vendor's official ones. 21265# * Restored the old minimal-ansi entry, luna needs it. 21266# * Fixed some incorrect ip and proportional-padding translations. 21267# 9.4.1 (Mon Feb 27 14:18:33 EST 1995): 21268# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. 21269# * Make the xterm entry 65 lines again; create xterm25 and xterm24 21270# to force a particular height. 21271# * Added beehive4 and reorganized other Harris entries. 21272# 9.4.2 (Thu Mar 9 01:45:44 EST 1995): 21273# * Merged in DEC's official entries for its terminals. The only old 21274# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). 21275# * Replaced the translated BBN Bitgraph entries with purpose-built 21276# ones from AT&T's SVr3. 21277# * Replaced the AT&T entries with AT&T's official terminfos. 21278# * Added teleray 16, vc415, cops10. 21279# * Merged in many individual capabilities from SCO terminfo files. 21280# 9.4.3 (Mon Mar 13 02:37:53 EST 1995): 21281# * Typo fixes. 21282# * Change linux entry so A_PROTECT enables IBM-PC ROM characters. 21283# 9.4.4 (Mon Mar 27 12:32:35 EST 1995): 21284# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, 21285# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, 21286# simterm, citoh and variants. 21287# * Replaced sol entry with sol1 and sol2. 21288# * Replaced Qume QVT and Freedom-series entries with purpose-built 21289# terminfo entries. 21290# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek 21291# and dg200 entries using caps from from SCO. 21292# * Added the usual set of function-key mappings to ANSI entry. 21293# * Corrected xterm's function-key capabilities. 21294# 9.4.5 (Tue Mar 28 14:27:49 EST 1995): 21295# * Fix in xterm entry, cub and cud are not reliable under X11R6. 21296# 9.4.6 (Thu Mar 30 14:52:15 EST 1995): 21297# * Fix in xterm entry, get the arrow keys right. 21298# * Change some \0 escapes to \200. 21299# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) 21300# * Added apple (Videx card), adm1a, oadm31. 21301# * Fixed malformed ampex csr. 21302# * Fixed act4, cyb110; they had old-style prefix padding left in. 21303# * Changed mandatory to advisory padding in many entries. 21304# * Replaced HP entries up to hpsub with purpose-built ones. 21305# * Blank rmir/smir/rmdc/smdc capabilities removed. 21306# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. 21307# 9.4.8 (Fri Apr 7 09:36:34 EDT 199): 21308# * Replaced the Ann Arbor entries with SCO's, the init strings are 21309# more efficient (but the entries otherwise identical). 21310# * Added dg211 from Shuford archive. 21311# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, 21312# adm42-nl, pc52, gs6300, xerox820, uts30. 21313# * Pull SCO's padding into vi200 entry. 21314# * Improved capabilities for tvi4107 and other Televideo and Viewpoint 21315# entries merged in from SCO's descriptions. 21316# * Fixed old-style prefix padding on zen50, h1500. 21317# * Moved old superbee entry to superbee-xsb, pulled in new superbee 21318# entry from SCO's description. 21319# * Reorganized the special entries. 21320# * Added lm#0 to cbunix and virtual entries. 21321# 21322# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): 21323# * Restored cdc456tst. 21324# * Fixed sb1 entry, SCO erroneously left out the xsb glitch. 21325# * Added megatek, beacon, microkit. 21326# * Freeze for ncurses-1.9 release. 21327# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): 21328# * Added historical data for TAB. 21329# * Comment fixes from David MacKenzie. 21330# * Added the new BSDI pc3 entry. 21331# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) 21332# * A change in the tic -C logic now ensures that all entries in 21333# the termcap translation will fit in < 1024 bytes. 21334# * Added `bobcat' and `gator' HP consoles and the Nu machine entries 21335# from GNU termcap file. This merges in all their local information. 21336# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) 21337# * Changed tic -C logic to dump all capabilities used by GNU termcap. 21338# * Added warnings about entries with long translations (restoring 21339# all the GNU termcaps pushes a few over the edge). 21340# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) 21341# * Yet another tic change, and a couple of entry tweaks, to reduce the 21342# number of long (> 1024) termcap translations back to 0. 21343# 21344# 9.6.0 (Mon May 1 10:35:54 EDT 1995) 21345# * Added kf13-kf20 to Linux entry. 21346# * Regularize Prime terminal names. 21347# * Historical data on Synertek. 21348# * Freeze for ncurses-1.9.1. 21349# 9.6.1 (Sat May 6 02:00:52 EDT 1995): 21350# * Added true xterm-color entry, renamed djm's pseudo-color entry. 21351# * Eliminate whitespace in short name fields, this tanks some scripts. 21352# * Name field changes to shorten some long entries. 21353# * Termcap translation now automatically generates empty rmir/smir 21354# when ich1/ich is present (copes with an ancient vi bug). 21355# * Added `screen' entries from FSF's screen-3.6.2. 21356# * Added linux-nic and xterm-nic entries. 21357# 9.6.2 (Sat May 6 17:00:55 EDT 1995): 21358# * Change linux entry to use smacs=\E[11m and have an explicit acsc, 21359# eliminating some special-case code in ncurses. 21360# 21361# 9.7.0 (Tue May 9 18:03:12 EDT 1995): 21362# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think 21363# that captures everything unique from it. 21364# * Added reorder script generator. 21365# * Freeze for ncurses 1.9.2 release. 21366# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): 21367# * Added Sean Farley's kspd, flash, rs1 capabilities for linux. 21368# * Added Olaf Siebert's corrections for adm12. 21369# * ansi-pc-color now includes the colors and pairs caps, so that 21370# entries which use it will inherit them automatically. 21371# * The linux entry can now recognize the center (keypad 5) key. 21372# * Removed some junk that found its way into Linux acsc. 21373# 21374# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): 21375# * Add 50% cut mark as a desperate hack to reduce tic's core usage. 21376# * xterm doesn't try to use application keypad mode any more. 21377# * Freeze for ncurses-1.9.3 release. 21378# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): 21379# * Added corrected sun entry from vendor. 21380# * Added csr capability to linux entry. 21381# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. 21382# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. 21383# * Some commented-out caps in long entries come back in, my code 21384# for computing string-table lengths had a bug in it. 21385# * pcansi series modified to fit comm-program reality better. 21386# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): 21387# * BSD/OS actually ships the ibmpc3 bold entry as its console. 21388# * Correct some bad aliases in the pcansi series 21389# * Added entry for QNX console. 21390# * Clean up duplicate long names for use with 4.4 library. 21391# * Change vt100 standout to be normal reverse vide, not bright reverse; 21392# this makes the Emacs status line look better. 21393# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995): 21394# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340. 21395# * Minor surgery, mostly on name strings, to shorten termcap version. 21396# 21397# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995): 21398# * Added dec-vt100 for use with the EWAN emulator. 21399# * Added kmous to xterm for use with xterm's mouse-tracking facility. 21400# * Freeze for 1.9.5 alpha release. 21401# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995): 21402# * Changed xterm lines to 24, the X11R6 default. 21403# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995): 21404# * Added 7 newly discovered, undocumented acsc characters to linux 21405# entry (the pryz{|} characters). 21406# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly. 21407# * Correct two typos in the xterm entries introduced in 9.9.1. 21408# * I finally figured out how to translate ko capabilities. Done. 21409# * Added tvi921 entries from Tim Theisen. 21410# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl. 21411# * Removed mystery tec entry, it was neither interesting nor useful. 21412# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f, 21413# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a, 21414# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211, 21415# by making them relative to use capabilities 21416# * Added cuf1=^L to tvi925 from deleted variant tvi925a. 21417# * fixed cup in adm22 entry and parametrized strings in vt320-k3. 21418# * added it#8 to entries that used to have :pt: -- tvi912, vi200, 21419# ampex80, 21420# * Translate all home=\E[;H capabilities to home=\E[H, they're 21421# equivalent. 21422# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of 21423# vt100 and ANSI-like terminals. 21424# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995): 21425# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic 21426# does this now, too. 21427# * fviewpoint is gone, it duplicated screwpoint. 21428# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, 21429# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, 21430# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. 21431# The UW vi50 replaces the old one, which becomes vi50adm, 21432# * No more embedded commas in name fields. 21433# 21434# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995): 21435# * XENIX forms characters in fos, trs16, scoansi become acsc strings, 21436# * Introduced klone+* entries for describing Intel-console behavior. 21437# * Linux kbs is default-mapped to delete for some brain-dead reason. 21438# * -nsl -> -ns. The -pp syntax is obsolete. 21439# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs. 21440# * Make xterm entry do application-keypad mode again. I got complaints 21441# that it was messing up someone's 3270 emulator. 21442# * Added some longname fields in order to avoid warning messages from 21443# older tic implementations. 21444# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use 21445# it! (This gives us pi, greater than, less than, and a few more.) 21446# * Freeze for ncurses-1.9.6 release. 21447# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995): 21448# * Add xon to a number of console entries, they're memory-mapped and 21449# don't need padding. 21450# * Correct the use dependencies in the ansi series. 21451# * Hand-translate more XENIX capabilities. 21452# * Added hpterm entry for HP's X terminal emulator. 21453# * Added aixterm entries. 21454# * Shortened four names so everything fits in 14 chars. 21455# 21456# 9.11.0 (Thu Nov 2 17:29:35 EST 1995): 21457# * Added ibcs2 entry and info on iBCS2 standard. 21458# * Corrected hpa/vpa in linux entry. They still fail the worm test. 21459# * We can handle the HP meml/memu capability now. 21460# * Added smacs to klone entries, just as documentation. 21461# * Carrected ansi.sys and cit-500 entries. 21462# * Added z39, vt320-k311, v220c, and avatar entries. 21463# * Make pcansi use the ansi.sys invis capability. 21464# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c, 21465# tvi925, tvi950, dt80, ncr7900i, h19. 21466# * X3.64 has been withdrawn, change some references. 21467# * Removed function keys from ansi-m entry. 21468# * Corrected ansi.sys entry. 21469# * Freeze for ncurses-1.9.7 release. 21470# 9.11.1 (Tue Nov 6 18:18:38 EST 1995): 21471# * Added rmam/smam capabilities to many entries based on init strings. 21472# * Added correct hpa/vpa to linux. 21473# * Reduced several entries relative to vt52. 21474# 9.11.2 (Tue Nov 7 00:21:06 EST 1995): 21475# * Exiled some utterly unidentifiable custom and homebrew types to the 21476# UFO file; also, obsolete small-screen hardware; also, entries which 21477# look flat-out incorrect, garbled, or redundant. These include the 21478# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, 21479# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, 21480# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, 21481# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, 21482# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, 21483# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, 21484# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, 21485# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, 21486# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, 21487# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, 21488# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, 21489# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, 21490# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. 21491# * Corrected pcvt25h as suggested by Brian C. Grayson 21492# <bgrayson@pine.ece.utexas.edu>. 21493# 9.11.3 (Thu Nov 9 12:14:40 EST 1995): 21494# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. 21495# * Added kent=\EOM to xterm entry. 21496# 21497# 9.11.4 (Fri Nov 10 08:31:35 EST 1995): 21498# * Corrected gigi entry. 21499# * Restored cuf/cud1 to xterm, their apparent bugginess was due to 21500# bad hpa/vpa capabilities. 21501# * Corrected flash strings to have a uniform delay of .2 sec. No 21502# more speed-dependent NUL-padding! 21503# * terminfo capabilities in comments bracketed with <>. 21504# 9.11.5 (Fri Nov 10 15:35:02 EST 1995): 21505# * Replaced pcvt with the 3.31 pcvt entries. 21506# * Freeze for 1.9.7a. 21507# 9.11.6 (Mon Nov 13 10:20:24 EST 1995): 21508# * Added emu entry from the X11R6 contrib tape sources. 21509# 21510# 9.12.0 (Wed Nov 29 04:22:25 EST 1995): 21511# * Improved iris-ansi and sun entries. 21512# * More flash string improvements. 21513# * Corrected wy160 & wy160 as suggested by Robert Dunn 21514# * Added dim to at386. 21515# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says 21516# he's ready to start using the termcap generated from this one. 21517# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, 21518# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. 21519# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, 21520# att610, att620, att630, 21521# * Changed hazeltine name prefix from h to hz. 21522# * Sent t500 to the UFI file. 21523# * I think we've sucked all the juice out of BSDI's termcap file now. 21524# * Freeze for ncurses 1.9.8 release 21525# 9.12.1 (Thu Nov 30 03:14:06 EST 1995) 21526# * Unfreeze, linux kbs needed to be fixed. 21527# * Tim Theisen pinned down a bug in the DMD firmware. 21528# 9.12.2 (Thu Nov 30 19:08:55 EST 1995): 21529# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko). 21530# (The broken ones had been shadowed by sgr.) 21531# 9.12.3 (Thu Dec 7 17:47:22 EST 1995): 21532# * Added documentation on ECMA-48 standard. 21533# * New Amiga entry. 21534# 9.12.4 (Thu Dec 14 04:16:39 EST 1995): 21535# * More ECMA-48 stuff 21536# * Corrected typo in minix entry, added pc-minix. 21537# * Corrected khome/kend in xterm (thank you again, Aaron Ucko). 21538# * Added rxvt entry. 21539# * Added 1.3.x color-change capabilities to linux entry. 21540# 9.12.5 (Tue Dec 19 00:22:10 EST 1995): 21541# * Corrected rxvt entry khome/kend. 21542# * Corrected linux color change capabilities. 21543# * NeXT entries from Dave Wetzel. 21544# * Cleaned up if and rf file names (all in /usr/share now). 21545# * Changed linux op capability to avoid screwing up a background color 21546# pair set by setterm. 21547# 9.12.6 (Wed Feb 7 16:14:35 EST 1996): 21548# * Added xterm-sun. 21549# 9.12.7 (Fri Feb 9 13:27:35 EST 1996): 21550# * Added visa50. 21551# 21552# 9.13.0 (Sun Mar 10 00:13:08 EST 1996): 21553# * Another sweep through the Shuford archive looking for new info. 21554# * Added dg100 alias to dg6053 based on a comp.terminals posting. 21555# * Added st52 from Per Persson. 21556# * Added eterm from the GNU Emacs 19.30 distribution. 21557# * Freeze for 1.9.9. 21558# 9.13.1 (Fri Mar 29 14:06:46 EST 1996): 21559# * FreeBSD console entries from Andrew Chernov. 21560# * Removed duplicate Atari st52 name. 21561# 9.13.2 (Tue May 7 16:10:06 EDT 1996) 21562# * xterm doesn't actually have ACS_BLOCK. 21563# * Change klone+color setf/setb to simpler forms that can be 21564# translated into termcap. 21565# * Added xterm1. 21566# * Removed mechanically-generated junk capabilities from cons* entries. 21567# * Added color support to bsdos. 21568# 9.13.3 (Thu May 9 10:35:51 EDT 1996): 21569# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>. 21570# * Created ecma+color, linux can use it. Also added ech to linux. 21571# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates. 21572# * Add descriptions to FreeBSD console entries. Also shorten 21573# some aliases to <= 14 chars for portability. 21574# * Added x68k console 21575# * Added OTbs to several VT-series entries. 21576# 9.13.4 (Wed May 22 10:54:09 EDT 1996): 21577# * screen entry update for 3.7.1 from Michael Alan Dorman. 21578# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996): 21579# * kterm correction due to Kenji Rikitake. 21580# * ACS correction in vt320-kll due to Phillippe De Muyter. 21581# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996): 21582# * Sun console entry correction from J.T. Conklin. 21583# * Changed all DEC VT300 and up terminals to use VT300 tab set 21584# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): 21585# * Added smul to linux entry (we never noticed it was missing 21586# because of sgr!). 21587# * Added rmln to hp+labels (deduced from other HP entries). 21588# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, 21589# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3. 21590# * Corrected vt220 acsc. 21591# * The klone+sgr and klone+sgr-dumb entries now use klone+acs; 21592# this corresponds to reality and helps prevent some tic warnings. 21593# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2, 21594# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11, 21595# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, 21596# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, 21597# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, 21598# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, 21599# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, 21600# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, 21601# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, 21602# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800, 21603# ifmr, v3220, wy100q, tandem653, ibmaed. 21604# * Added DWK terminal description. 21605# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996): 21606# * Many entries now have highlights inherited from adm+sgr. 21607# * xterm entry now corresponds to XFree86 3.1.2E, with color. 21608# * xtitle and xtitle-twm enable access to the X status line. 21609# * Added linux-1.3.6 color palette caps in conventional format. 21610# * Added adm1178 terminal. 21611# * Move fos and apollo terminals to obsolete category. 21612# * Aha! The BRL terminals file told us what the Iris extensions mean. 21613# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, 21614# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: 21615# cit500, adm11. 21616# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): 21617# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, 21618# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. 21619# * Corrected, from BRL termcap file: vi50. 21620# * Better rxvt entry & corrected xterm entries from Thomas Dickey. 21621# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996): 21622# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1, 21623# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne 21624# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi, 21625# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro, 21626# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae. 21627# * Paired-attribute fixes to various terminals. 21628# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons. 21629# * xterm entry corrections from Thomas Dickey. 21630# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996): 21631# * Added t916 entry, translated from a termcap in SCO's support area. 21632# * New qnx entry from Michael Hunter. 21633# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996): 21634# * Added hpex2 from Ville Sulko. 21635# * Fixed a bug that ran the qnx and pcvtXX together. 21636# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996): 21637# * Added dtterm entry from Solaris CDE. 21638# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996): 21639# * corrected pairs#8 typo in dtterm entry. 21640# * added tvi9065. 21641# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): 21642# * updated xterm entry to cover 3.1.2E's new features. 21643# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): 21644# * Added new minix entry 21645# * Removed aliases of the form ^[0-9]* for obsolete terminals. 21646# * Commented out linux-old, nobody's using pre-1.2 kernels now. 21647# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996): 21648# * Added Prism entries and kt7ix. 21649# * Caution notes about EWAN and tabset files. 21650# * Changed /usr/lib/tabset -> /usr/share/tabset. 21651# * Added acsc/rmacs/smacs to vt52. 21652# 9.13.18 (Mon Oct 28 13:24:59 EST 1996): 21653# * Merged in Thomas Dickey's reorganization of the xterm entries; 21654# added technical corrections to avoid warning messages. 21655# 9.13.19 (Sat Nov 16 16:05:49 EST 1996): 21656# * Added rmso=\E[27m in Linux entry. 21657# * Added koi8-r support for Linux console. 21658# * Replace xterm entries with canonical ones from XFree86 3.2. 21659# 9.13.20 (Sun Nov 17 23:02:51 EST 1996): 21660# * Added color_xterm from Jacob Mandelson 21661# 9.13.21 (Mon Nov 18 12:43:42 EST 1996): 21662# * Back off the xterm entry to use r6 as a base. 21663# 9.13.22 (Sat Nov 30 11:51:31 EST 1996): 21664# * Added dec-vt220 at Adrian Garside's request. 21665# 21666#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)--------------------------- 21667# 21668# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn 21669# * Minor corrections to xterm entries. 21670# * Replaced EWAN telnet entry. 21671# * Dropped the reorder script generator. It was a fossil. 21672# 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 21673# * Replaced minitel-2 entry. 21674# * Added MGR, ansi-nt. 21675# 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 21676# * Thorsten Lockert added termcap `bs' to a lot of types, working from 21677# the 4.4BSD Lite2 file. 21678# 21679# 10.1.1 (Sat May 3 21:41:27 EDT 1997): 21680# * Use setaf/setab consistently with SVr4. 21681# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5 21682# 10.1.2 (Sat May 24 21:10:57 EDT 1997) 21683# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4) 21684# * add xterm-16color, for XFree86 3.3 21685# 10.1.3 (Sat May 31 12:21:05 EDT 1997) 21686# * correct typo in emu 21687# * correct typo in vt102-w (Robert Wuest) 21688# * make new entry xterm-xf86-v33, restored xterm-xf86-v32. 21689# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997) 21690# * remove ech capability from rxvt (it does the wrong thing) 21691# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997) 21692# * remove spurious newlines from several entries (hp+color, wy50, 21693# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm, 21694# gs6300) 21695# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997) 21696# * correct rmso capability of wy50-mc 21697# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997) 21698# * add cbt to xterm-xf86-v32 21699# * disentangle some entries from 'xterm', preferring xterm-r6 in case 21700# 'xterm' is derived from xterm-xf86-v32, which implements ech and 21701# other capabilities not in xterm-r6. 21702# * remove alternate character set from kterm entry. 21703# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997) 21704# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'. 21705# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997) 21706# * add xterm-8bit entry. 21707# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997) 21708# * repair several places where early version of tic replaced \, with \\\, 21709# * make acsc entries canonical form (sorted, uniq). 21710# * modify acsc entries for linux, linux-koi8 21711# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b 21712# * add color, mouse support to kterm. 21713# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997) 21714# * correct wy120 smxon/tbc capabilities which were stuck together. 21715# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997) 21716# * add entry for xterm-xf86-v39t 21717# 10.1.13 (Sat Nov 8 13:43:33 EST 1997) 21718# * add u8,u9 to sun-il description 21719# 10.1.14 (Sat Nov 22 19:59:03 EST 1997) 21720# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97 21721# version. 21722# * add hds200 description (Walter Skorski) 21723# * add EMX 0.9b descriptions 21724# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver) 21725# * rename xhpterm back to hpterm. 21726# 10.1.15 (Sat Nov 29 19:21:59 EST 1997) 21727# * change initc in linux-c-nc to use 0..1000 range. 21728# 10.1.16 (Sat Dec 13 19:41:59 EST 1997) 21729# * remove hpa/vpa from rxvt, which implements them incorrectly. 21730# * add sgr0 for rxvt. 21731# * remove bogus smacs/rmacs from EMX descriptions. 21732# 10.1.17 (Sat Dec 20 17:54:10 EST 1997) 21733# * revised entry for att7300 21734# 10.1.18 (Sat Jan 3 17:58:49 EST 1998) 21735# * use \0 rather than \200. 21736# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution. 21737# 10.1.19 (Sat Jan 17 14:24:57 EST 1998) 21738# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset. 21739# * rename xterm-xf86-v39t to xterm-xf86-v40 21740# * remove bold/underline from sun console entries since they're not 21741# implemented. 21742# 10.1.20 (Sat Jan 24 11:02:51 EST 1998) 21743# * add beterm entry (Fred Fish) 21744# * add irix-color/xwsh entry. 21745# * turn ncv off for linux. 21746# 10.1.21 (Sat Jan 31 17:39:16 EST 1998) 21747# * set ncv for FreeBSD console (treat colors with reverse specially). 21748# * remove sgr string from qnx based on report by Xiaodan Tang 21749# 10.1.22 (Wed Feb 11 18:40:12 EST 1998) 21750# * remove spurious commas from descriptions 21751# * correct xterm-8bit to match XFree86 3.9Ad F1-F4. 21752# 10.1.23 (Sat Feb 28 17:48:38 EST 1998) 21753# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 21754# apparently based on cp-866). 21755# 21756#-(replaced-changelog-1998/02/28-by-ESR)---------------------------------------- 21757# 21758# 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 21759# * Replaced minitel-2 entry. 21760# * Added MGR, ansi-nt. 21761# * Minor corrections to xterm entries. 21762# * Replaced EWAN telnet entry. 21763# * Dropped the reorder script generator. It was a fossil. 21764# 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 21765# * Thorsten Lockert added termcap `bs' to a lot of types, working from 21766# the 4.4BSD Lite2 file. 21767# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997): 21768# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js. 21769# * Updated iris-ansi; corrected vt102-w. 21770# * Switch base xterm entry to 3.3 level. 21771# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997) 21772# * Added basic4. 21773# * Removed rmir/smir from tv92B. 21774# 21775# 10.2.0 (Sat Feb 28 12:47:36 EST 1998): 21776# * add hds200 description (Walter Skorski) 21777# * add beterm entry (Fred Fish) 21778# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color, 21779# iris-color entries. 21780# * add emx entries. 21781# * Replaced unixpc entry with Benjamin Sittler's corrected version. 21782# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's 21783# versions. 21784# * remove sgr string from qnx based on report by Xiaodan Tang 21785# * Added u8/u9, removed rmul/smul from sun-il. 21786# * 4.2 tic displays \0 rather than \200. 21787# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 21788# apparently based on cp-866). 21789# * Merged in Pavel Roskin's acsc for linux-koi8 21790# * Corrected some erroneous \\'s to \. 21791# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV. 21792# * II -> ii in pcvtXX, screen, xterm. 21793# * Removed \n chars following ANSI escapes in sgr & friends. 21794# * Updated Wyse entries. 21795# * h19 corrections from Tim Pierce. 21796# * Noted that the dm2500 has both ich and smir. 21797# * added pccons for the Alpha under OSF/1. 21798# * Added Sony NEWS workstation entries and cit101e-rv. 21799# * Reverted `amiga'; to Kent Polk's version, as I'm told 21800# the Verkuil entry messes up with Amiga Telnet. 21801# 10.2.1 (Sun Mar 8 18:32:04 EST 1998): 21802# * Corrected attributions in 10.2.0 release notes. 21803# * Scanned the Shuford archive for new terminfos and information. 21804# * Removed sgr from qnx entry (Thomas Dickey). 21805# * Added entries for ICL and Kokusai Data Systems terminals. 21806# * Incorporated NCR terminfos from the Boundless Technology FTP site. 21807# * Incorporated att700 from the Boundless Technology FTP site. 21808# * Miscellaneous contact-address and Web-page updates. 21809# 21810#-(changelog-beginning-ncurses-4.2)--------------------------------------------- 21811# 21812# 1998/5/9 21813# * add nxterm and xterm-color terminfo description (request by Cristian 21814# Gafton <gafton@redhat.com>). 21815# * modify rxvt terminfo description to clear alternate screen before 21816# switching back to normal screen, for compatibility with applications 21817# which use xterm (reported by Manoj Kasichainula <manojk@io.com>). 21818# * modify linux terminfo description to reset color palette (reported 21819# by Telford Tendys <telford@eng.uts.edu.au>). 21820# 21821# 1998/7/4 21822# * merge changes from current XFree86 xterm terminfo descriptions. 21823# 21824# 1998/7/25 21825# * Added minitel1 entries from Alexander Montaron. 21826# * Added qnxt2 from Federico Bianchi. 21827# * Added arm100 terminfo entries from Dave Millen. 21828# 21829# 1998/8/6 21830# * Added ncsa telnet entries from Francesco Potorti 21831# 21832# 1998/8/15 21833# * modify ncsa telnet entry to reflect color, other capabilities based on 21834# examination of the source code - T.Dickey. 21835# 21836# 1998/8/22 21837# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD. 21838# 21839# 1998/8/29 21840# * Added Francesco Potorti's tuned Wyse 99 entries. 21841# * dtterm enacs correction from Alexander V. Lukyanov. 21842# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version. 21843# * correct a typo in icl6404 entry. 21844# * add xtermm and xtermc 21845# 21846# 1998/9/26 21847# * format most %'char' sequences to %{number} 21848# * adapt IBM AIX 3.2.5 terminfo - T.Dickey 21849# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD 21850# 21851# 1998/10/10 21852# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD 21853# * correct initialization string in xterm-r5, add misc other features 21854# to correspond with xterm patch 84 - TD 21855# 21856# 1998/12/19 21857# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD 21858# * add Mathew Vernon's mach console entries 21859# * corrections for ncsa function-keys (report by Larry Virden) 21860# 21861# 1998/12/19 21862# * change linux to use ncv#2, since underline does not work with color - TD 21863# 21864# 1999/1/9 21865# * add kbt to iris-ansi, document other shift/control functionkeys - TD 21866# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad 21867# application modes, change kent to use the correct keypad code - TD 21868# 21869# 1999/1/10 21870# * add entry for Tera Term - TD 21871# 21872# 1999/1/23 21873# * minor improvements for teraterm entry - TD 21874# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold, 21875# and bsdos-bold to bsdos-pc (Jeffrey C Honig) 21876# 21877# 1999/2/20 21878# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in 21879# xterm and ncsa entries by removing the unneeded ones. Note that 21880# some entries will return kend & khome versus kslt and kfnd, for 21881# PC-style keyboards versus strict vt220 compatiblity - TD 21882# 21883# 1999/3/13 21884# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard 21885# tables - TD 21886# * add 'crt' entry - TD 21887# * correct typos in 'linux-c' entry - TD 21888# 21889# 1999/3/14 21890# * update entries for BSD/OS console to use klone+sgr and klone+color 21891# (Jeffrey C Honig) 21892# 21893# 1999/3/27 21894# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD. 21895# 21896# 1999/4/10 21897# * add linux-lat, from RedHat patches to ncurses 4.2 21898# 21899# 1999/4/17 21900# * add complete set of default function-key definitions for scoansi - TD. 21901# 21902# 1999/7/3 21903# * add cnorm, cvvis for Linux 2.2 kernels 21904# 21905# 1999/7/24 21906# * add kmous to xterm-r5 -TD 21907# * correct entries xterm+sl and xterm+sl-twm, which were missing the 21908# parent "use" clause -TD 21909# 21910# 1999/7/31 21911# * corrected cnorm, added el1 in 'screen' description -TD 21912# 21913# 1999/8/14 21914# * add ms-vt100 -TD 21915# 21916# 1999/8/21 21917# * corrections to beterm entry -TD 21918# 21919# 1999/8/28 21920# * add cygwin entry -TD 21921# 21922# 1999/9/4 21923# * minor corrections for beterm entry -TD 21924# 21925# 1999/9/18 21926# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch 21927# 21928# 1999/9/25 21929# * add amiga-8bit entry 21930# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons, 21931# rcons-color, based on 21932# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src 21933# * add alias for iris-ansi-net 21934# 21935# 1999/10/2 21936# * corrected scoansi entry's acsc, some function keys, add color -TD 21937# 21938# 1999/10/23 21939# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD 21940# * reorder ncsa entries to make ncsa-vt220 use the alternate function 21941# key mapping, leaving Potorti's entries more like he named them -TD 21942# * remove enter/exit am-mode from cygwin -TD 21943# 21944# 1999/10/30 21945# * correct typos in several entries (missing '[' from CSI): 21946# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir 21947# strings for avt-ns -TD 21948# * add 'dim' to ncv mask for linux (report by Klaus Weide). 21949# 21950# 1999/11/27 21951# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD 21952# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD 21953# * add xterm-88color and xterm-256color -TD 21954# 21955# 1999/12/4 21956# * add "obsolete" termcap strings -TD 21957# * add kvt and gnome entries -TD 21958# 21959# 1999/12/11 21960# * correct cup string for regent100 -TD 21961# 21962# 2000/1/1 21963# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD 21964# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD 21965# * change OTrs capabilities to rs2 -TD 21966# * add obsolete and extended capabilities to 'screen' -TD 21967# 21968# 2000/1/5 21969# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts 21970# with kf10 -TD 21971# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', 21972# and adding kcbt -TD 21973# 21974# 2000/1/12 21975# * remove incorrect khome/kend from xterm-xf86-v333, which was based on 21976# nonstandard resource settings -TD 21977# 21978# 2000/2/26 21979# * minor fixes for xterm-*, based on Debian #58530 -TD 21980# 21981# 2000/3/4 21982# * add several terminal types from esr's "11.0", as well as comments. 21983# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, 21984# vt220-8bit, vt220-old, wy85-8bit 21985# 21986# 2000/3/18 21987# * add several terminal types from esr's "11.0.1" (ansi-*). 21988# * update OTxx capabilities for changes on 2000/3/4. 21989# * revert part of vt220 change (request by Todd C Miller for OpenBSD) 21990# 21991# 2000/3/26 21992# * move screen's AX extension to ecma+color, modify several entries to 21993# use that, adjusting ncv as needed -TD 21994# 21995# 2000/4/8 21996# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig) 21997# * correct spelling error in entry name: bq300-rv was given as bg300-rv 21998# in esr's version. 21999# 22000# 2000/4/15 22001# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD 22002# * correct color definition for ibm3164, make minor changes to other 22003# IBM terminal definitions based on recent terminfo descriptions -TD 22004# 22005# 2000/4/22 22006# * add mgterm, from NetBSD -TD 22007# * add alias sun-cgsix for sun-ss5 as per NetBSD 22008# * change cons25w to use rs2 for reset rather than rs1 -TD 22009# * add rc/sc to aixterm based on manpage -TD 22010# 22011# 2000/5/13 22012# * remove ncv from xterm-16color, xterm-256color 22013# 22014# 2000/6/10 22015# * add kmous capability to linux to use Joerg Schoen's gpm patch. 22016# 22017# 2000/7/1 22018# * add Eterm (Michael Jennings) 22019# 22020# 2000-07-18 22021# * add amiga-vnc entry. 22022# 22023# 2000-08-12 22024# * correct description of Top Gun Telnet. 22025# * add kterm-color 22026# 22027# 2000-08-26 22028# * add qansi* entries from QNX ftp site. 22029# 22030# 2000-09-16 22031# * add Matrix Orbital entries by Eric Z. Ayers). 22032# * add xterm-basic, xterm-sco entries, update related entries to XFree86 22033# 4.0.1c -TD 22034# 22035# 2000-09-17 22036# * add S0, E0 extensions to screen's entry -TD 22037# 22038# 2000-09-23 22039# * several corrections based on tic's new parameter-checking code -TD 22040# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8 22041# bracketing sequences that reset video attributes (\E8 would restore 22042# them) -TD 22043# 22044# 2000-11-11 22045# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD 22046# 22047# 2000-12-16 22048# * improved scoansi, based on SCO man-page, and testing console, 22049# scoterm with tack -TD 22050# 22051# 2001-01-27 22052# * modify kterm to use acsc via SCS controls. 22053# 22054# 2001-02-10 22055# * screen 3.9.8 allows xterm mouse controls to pass-through 22056# 22057# 2001-03-11 22058# * remove spurious "%|" from some xterm entries. 22059# 22060# 2001-03-31 22061# * modify 'screen' khome/kend to match screen 3.09.08 22062# * add examples of 'screen' customization (screen.xterm-xfree86, 22063# screen.xterm-r6, screen.teraterm) -TD 22064# 22065# 2001-04-14 22066# * correct definitions of shifted editing keys for xterm-xfree86 -TD 22067# * add "Apple_Terminal" entries -Benjamin Sittler 22068# * remove time-delays from "Apple_Terminal" entries -TD 22069# * make sgr entries time-delays consistent with individual caps -TD 22070# 22071# 2001-05-05 22072# * corrected/updated screen.xterm-xfree86 22073# 22074# 2001-05-19 22075# * ELKS descriptions, from Federico Bianchi 22076# * add u6 (CSR) to Eterm (Michael Jennings). 22077# 22078# 2001-07-21 22079# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's 22080# tic which handles names no longer than 14 characters. Add 22081# corresponding descriptions for the Darwin PowerPC console named 22082# "xnuppc" -Benjamin Sittler 22083# 22084# 2001-09-01 22085# * change kbs in mach entries to ^? (Marcus Brinkmann). 22086# 22087# 2001-11-17 22088# * add "putty" entry -TD 22089# * updated "Apple_Terminal" entries -Benjamin Sittler 22090# 22091# 2001-11-24 22092# * add ms-vt100-color entry -TD 22093# * add "konsole" entries -TD 22094# 22095# 2001-12-08 22096# * update gnome entry to Redhat 7.2 -TD 22097# 22098# 2002-05-25 22099# * add kf13-kf48 strings to cons25w -TD 22100# * add pcvt25-color entry -TD 22101# * changed a few /usr/lib/tabset -> /usr/share/tabset. 22102# * improve some features of scoansi entry based on SCO's version -TD 22103# * add scoansi-new entry corresponding to OpenServer 5.0.6 22104# 22105# 2002-06-15 22106# * add kcbt to screen entry -TD 22107# 22108# 2002-06-22 22109# * add rxvt-16color, ibm+16color, mvterm entries -TD 22110# 22111# 2002-09-28 22112# * split out linux-basic entry, making linux-c inherit from that, and 22113# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect 22114# the history of this console type -TD 22115# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the 22116# r/g/b parameters of initc are in the range 0 to 1000 -TD 22117# 22118# 2002-10-05 22119# * minor fix for scale-factor of linux-c and linux-c-nc -TD 22120# 22121# 2002-11-09 22122# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2 22123# in the latter -TD 22124# 22125# 2002-11-16 22126# * add entries for mterm (mterm, mterm-ansi, decansi) -TD 22127# * ncr260wy350pp has only 16 color pairs -TD 22128# * add sun-type4 from NetBSD -TD 22129# * update xterm-xfree86 to current (patch 170) -TD 22130# * add screen-bce, screen-s entries -TD 22131# * add xterm-1002, xterm-1003 entries -TD 22132# 22133# 2003-01-11 22134# * update homepage for Top Gun Telnet/SSH 22135# 22136# 2003-01-25 22137# * reduce duplication in emx entries, added emx-base -TD 22138# 22139# 2003-05-24 22140# * corrected acs for screen.teraterm -TD 22141# * add tkterm entry -TD 22142# 22143# 2003-07-15 22144# * cygwin changes from Charles Wilson: 22145# misc/terminfo.src (nxterm|xterm-color): make xterm-color 22146# primary instead of nxterm, to match XFree86's xterm.terminfo 22147# usage and to prevent circular links. 22148# (rxvt): add additional codes from rxvt.org. 22149# (rxvt-color): new alias 22150# (rxvt-xpm): new alias 22151# (rxvt-cygwin): like rxvt, but with special acsc codes. 22152# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or 22153# with a "native" MSWin GUI. Each takes different acsc codes, 22154# which are both different from the "normal" rxvt's acsc. 22155# (cygwin): cygwin-in-cmd.exe window. Lots of fixes. 22156# (cygwinDBG): ditto. 22157# 22158# 2003-09-27 22159# * update gnome terminal entries -TD 22160# 22161# 2003-10-04 22162# * add entries for djgpp 2.03 and 2.04 -TD 22163# 22164# 2003-10-25 22165# * add alias for vtnt -TD 22166# * update xterm-xfree86 for XFree86 4.4 -TD 22167# 22168# 2003-11-22 22169# * add linux-vt (Andrey V Lukyanov) 22170# 22171# 2003-12-20 22172# * add screen.linux -TD 22173# 22174# 2004-01-10 22175# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler) 22176# 22177# 2004-01-17 22178# * add OpenNT/Interix/SFU entries (Federico Bianchi) 22179# * add vt100+ and vt-utf8 entries -TD 22180# * add uwin entry -TD 22181# 22182# 2004-03-27 22183# * add sgr strings to several common entries lacking them, e.g., 22184# screen, to make the entries more portable -TD 22185# * remove cvvis from rxvt entry, since it is the same as cnorm -TD 22186# * similar fixups for cvvis/cnorm various entries -TD 22187# 22188# 2004-05-22 22189# * remove 'ncv' from xterm-256color (patch 188) -TD 22190# 22191# 2004-06-26 22192# * add mlterm -TD 22193# * add xterm-xf86-v44 -TD 22194# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies 22195# on G1 being used via an ISO-2022 escape sequence (report by 22196# Juliusz Chroboczek) -TD 22197# * add 'hurd' entry -TD 22198# 22199# 2004-07-03 22200# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than 22201# xterm-basic -TD 22202# * align with xterm #192's use of xterm-new -TD 22203# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD 22204# * make xterm-new the default "xterm" -TD 22205# 22206# 2004-07-10 22207# * minor fixes for emu -TD 22208# * add emu-220 22209# * add rmam/smam to linux (Trevor Van Bremen) 22210# * change wyse acsc strings to use 'i' map rather than 'I' -TD 22211# * fixes for avatar0 -TD 22212# * fixes for vp3a+ -TD 22213# 22214# 2004-07-17 22215# * add xterm-pc-fkeys -TD 22216# * review/update gnome and gnome-rh90 entries (prompted by 22217# Redhat Bugzilla #122815) -TD 22218# * review/update konsole entries -TD 22219# * add sgr, correct sgr0 for kterm and mlterm -TD 22220# * correct tsl string in kterm -TD 22221# 22222# 2004-07-24 22223# * make ncsa-m rmacs/smacs consistent with sgr -TD 22224# * add sgr, rc/sc and ech to syscons entries -TD 22225# * add function-keys to decansi -TD 22226# * add sgr to mterm-ansi -TD 22227# * add sgr, civis, cnorm to emu -TD 22228# * correct/simplify cup in addrinfo -TD 22229# * corrections for gnome and konsole entries 22230# (Redhat Bugzilla #122815) -Hans de Goede 22231# * modify DEC entries (vt220, etc), to add sgr string, and to use 22232# ISO-2022 strings for rmacs/smacs -TD 22233# 22234# 2004-07-31 22235# * rename xterm-pc-fkeys to xterm+pcfkeys -TD 22236# 22237# 2004-08-07 22238# * improved putty entry -Robert de Bath 22239# 22240# 2004-08-14 22241# * remove dch/dch1 from rxvt because they are implemented inconsistently 22242# with the common usage of bce/ech -TD 22243# * remove khome from vt220 (vt220's have no home key) -TD 22244# * add rxvt+pcfkeys -TD 22245# 22246# 2004-08-21 22247# * modify several entries to ensure xterm mouse and cursor visibility 22248# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm, 22249# Eterm, screen. (The xterm entries are left alone - old ones for 22250# compatibility, and the new ones do not require this change) -TD 22251# 22252# 2004-08-28 22253# * add morphos entry -Pavel Fedin 22254# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin 22255# * corrected \E[5?l to \E[?5l in vt320 entries -TD 22256# 22257# 2004-11-20 22258# * update wsvt25 entry -TD 22259# 22260# 2005-01-29 22261# * update pairs for xterm-88color and xterm-256color to reflect the 22262# ncurses extended-color support -TD 22263# 22264# 2005-02-26 22265# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD 22266# * add aixterm-16color to demonstrate 16-color capability -TD 22267# 22268# 2005-04-23 22269# * add media-copy to vt100 -TD 22270# * corrected acsc string for vt52 -TD 22271# 22272# 2005-04-30 22273# * add kUP, kDN (user-defined shifted up/down arrow) definitions for 22274# xterm-new -TD 22275# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD 22276# 22277# 2005-05-07 22278# * re-corrected acsc string for vt52 -TD 22279# 22280# 2005-05-28 22281# * corrected sun-il sgr string which referred to bold and underline -TD 22282# * add sun-color entry -TD 22283# 22284# 2005-07-23 22285# * modify sgr0 in several entries to reset alternate-charset as in the 22286# sgr string -TD 22287# * modify sgr string of prism9 to better match the individual 22288# attributes -TD 22289# 22290# 2005-10-15 22291# * correct order of use= in rxvt-basic -TD 22292# 22293# 2005-10-26 22294# * use kind/kri as shifted up/down cursor keys for xterm-new -TD 22295# 22296# 2005-11-12 22297# * other minor fixes to cygwin based on tack -TD 22298# * correct smacs in cygwin (report by Baurzhan Ismagulov). 22299# 22300# 2006-02-18 22301# * add nsterm-16color entry -TD 22302# * remove ncv flag from xterm-16color -TD 22303# * remove setf/setb from xterm-256color to match xterm #209 -TD 22304# * update mlterm entry to 2.9.2 -TD 22305# 22306# 2006-02-25 22307# * fixes to make nsterm-16color match report 22308# by Christian Ebert -Alain Bench 22309# 22310# 2006-04-22 22311# * add xterm+256color building block -TD 22312# * add gnome-256color, putty-256color, rxvt-256color -TD 22313# 22314# 2006-05-06 22315# * add hpterm-color -TD 22316# 22317# 2006-06-24 22318# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD 22319# * add gnome-fc5 (prompted by GenToo #122566) -TD 22320# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench 22321# * improve xterm-256color by combining the ibm+16color setaf/setab 22322# strings with SGR 48. The setf/setb strings also are cancelled here 22323# rather than omitted so derived entries will cancel those also -Alain 22324# Bench 22325# 22326# 2006-07-01 22327# * add some notes regarding copyright to terminfo.src -TD 22328# * use rxvt+pcfkeys in Eterm -TD 22329# * remove km and flash from gnome, Eterm and rxvt since they do not work 22330# as one would expect (km sends ESC rather than setting the 8th bit 22331# of the key) -TD 22332# * add/use ansi+enq, vt100+enq and vt102+enq -TD 22333# * add konsole-solaris -TD 22334# 22335# 2006-07-22 22336# * update xterm-sun and xterm-sco entries to match xterm #216 -TD 22337# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD 22338# * modify xterm-24 to inherit from "xterm" -TD 22339# * add xiterm entry -TD 22340# * add putty-vt100 entry -TD 22341# * corrected spelling of Michael A Dorman's name, prompted by 22342# http://www.advogato.org/person/mdorman/diary.html -TD 22343# 22344# 2006-08-05 22345# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD 22346# * update xterm+pcfkeys to match xterm #216 -TD 22347# 22348# 2006-08-17 22349# * make descriptions of xterm entries consistent with its terminfo -TD 22350# 22351# 2006-08-26 22352# * add xfce, mgt -TD 22353# 22354# 2006-09-02 22355# * correct acsc string in kterm -TD 22356# 22357# 2006-09-09 22358# * add kon entry -TD 22359# * remove invis from linux and related entries, add klone+sgr8 for those 22360# that implement the feature (or have not been shown to lack it) -TD 22361# 22362# 2006-09-23 22363# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD 22364# * minor improvements to rxvt+pcfkeys -TD 22365# 22366# 2006-09-30 22367# * fix a few typos in if/then/else expressions -TD 22368# 22369# 2006-10-07 22370# * add several GNU Screen variations with 16- and 256-colors, and 22371# status line (Alain Bench). 22372# 22373# 2007-03-03 22374# * add Newbury Data entries (Jean-Charles Billaud). 22375# 22376# 2007-06-10 22377# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD 22378# 22379# 2007-07-14 22380# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD 22381# * add konsole-256color entry -TD 22382# 22383# 2007-08-18 22384# * add 9term entry (request by Juhapekka Tolvanen) -TD 22385# 22386# 2007-10-13 22387# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD 22388# * add shift-control- and control-modified keys for rxvt editing 22389# keypad -TD 22390# * update mlterm entry to 2.9.3 -TD 22391# * add mlterm+pcfkeys -TD 22392# 22393# 2007-10-20 22394# * move kLFT, kRIT, kind and kri capabilities from xterm-new to 22395# xterm+pcc0, etc., to make the corresponding building blocks reflect 22396# xterm's capabilities -TD 22397# * add mrxvt entry -TD 22398# * add xterm+r6f2, use in mlterm and mrxvt entries -TD 22399# 22400# 2007-11-03 22401# * correct acsc strings for h19 and z100 (Benjamin Sittler) 22402# 22403# 2007-11-11 22404# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to 22405# xterm starting with patch #216 -TD 22406# * make legacy xterm entries such as xterm-24 inherit from xterm-old, 22407# to match xterm #230 -TD 22408# * extend xterm+pccX entries to match xterm #230 -TD 22409# * add xterm+app, xterm+noapp, from xterm #230 -TD 22410# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD 22411# 22412# 2008-04-19 22413# * add screen.rxvt -TD 22414# 22415# 2008-04-28 22416# * add screen+fkeys (prompted by Debian #478094) -TD 22417# 22418# 2008-06-28 22419# * add screen.mlterm -TD 22420# * improve mlterm and mlterm+pcfkeys -TD 22421# 22422# 2008-08-23 22423# * add Eterm-256color, Eterm-88color -TD 22424# * add rxvt-88color -TD 22425# 22426# 2008-10-12 22427# * add teraterm4.59 entry, use that as primary teraterm entry, rename 22428# original to teraterm2.3 -TD 22429# * update "gnome" to 2.22.3 -TD 22430# * update "konsole" to 1.6.6 -TD 22431# * add "aterm" -TD 22432# * add "linux2.6.26" -TD 22433# 22434# 2008-11-15 22435# * change several \E[2g (clear tab at current column) to \E[3g 22436# (clear all tabs) to match definition for tbc capability -TD 22437# 22438# 2008-11-29 22439# * add eterm-color -TD 22440# 22441# 2009-01-10 22442# * add screen.Eterm -TD 22443# 22444# 2009-03-28 22445# * correct typo in pfkey of ansi.sys-old 22446# (report by Kalle Olavi Niemitalo) 22447# * move function- and cursor-keys from emx-base to ansi.sys, and create 22448# a pfkey capability which handles F1-F48 -TD 22449# 22450# 2009-05-02 22451# * add vwmterm entry (Bryan Christ) 22452# 22453# 2009-09-19 22454# * change ncv and op capabilities in sun-color to match Sun's entry for 22455# this (report by Laszlo Peter) 22456# * improve interix smso by using reverse rather than bold (report by 22457# Kristof Zelechovski). 22458# 22459# 2009-10-03 22460# * remove unnecessary kcan assignment to ^C from putty (Sven Joachim) 22461# * add linux-16color (Benjamin Sittler) 22462# * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler) 22463# * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler) 22464# * add ccc and initc capabilities to xterm-16color -TD 22465# 22466# 2009-10-31 22467# * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201) 22468# 22469# 2009-12-12 22470# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta) 22471# 22472# 2009-12-12 22473# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler) 22474# * rename minix to minix-1.7, add minix entry for Minux3 -TD 22475# 22476# 2009-12-26 22477# * add bterm (bogl 0.1.18) -TD 22478# * minor fix to rxvt+pcfkeys -TD 22479# 22480# 2010-02-06 22481# * update mrxvt to 0.5.4, add mrxvt-256color -TD 22482# 22483# 2010-02-13 22484# * add several screen-bce.XXX entries -TD 22485# 22486# 2010-02-23 22487# * modify screen-bce.XXX entries to exclude ech, since screen's color 22488# model does not clear with color for that feature -TD 22489# 22490# 2010-03-20 22491# * rename atari and st52 to atari-old, st52-old, use newer entries from 22492# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane). 22493# 22494# 2010-06-12 22495# * add mlterm+256color entry -TD 22496# 22497# 2010-07-17 22498# * add hard-reset for rs2 to wsvt25 to help ensure that reset ends 22499# the alternate character set (patch by Nicholas Marriott) 22500# 22501# 2010-08-28 22502# * improve acsc for vt52 (Benjamin Sittler) 22503# * modify nsterm entries for consistent sgr/sgr0 -TD 22504# * modify xnuppc entries for consistent sgr/sgr0 -TD 22505# * add invis to tek4115 sgr -TD 22506# 22507# 2010-09-11 22508# * reformat acsc strings to canonical format -TD 22509# 22510# 2010-09-25 22511# * add "XT" capability to entries for terminals that support both 22512# xterm-style mouse- and title-controls, for "screen" which 22513# special-cases TERM beginning with "xterm" or "rxvt" -TD 22514# 22515# 2010-10-02 22516# * fill in no-parameter forms of cursor-movement where a parameterized 22517# form is available -TD 22518# * fill in missing cursor controls where the form of the controls is 22519# ANSI -TD 22520# * add parameterized cursor-controls to linux-basic (report by Dae) -TD 22521# 22522# 2010-10-09 22523# * correct comparison used for setting 16-colors in linux-16color 22524# entry (Novell #644831) -TD 22525# * improve linux-16color entry, using "dim" for color-8 which makes it 22526# gray rather than black like color-0 -TD 22527# 22528# 2010-11-20 22529# * make "vte" the principal entry defining "gnome", since GNOME terminal 22530# is merely one of several terminals whose behavior is provided by this 22531# library -TD 22532# 22533# 2010-11-27 22534# * fix typo in rmso for tek4106 -Goran Weinholt 22535# 22536# 2010-12-11 22537# * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno 22538# * also suppress ncv in konsole-base -TD 22539# 22540# 2011-02-05 22541# * add U8 feature to denote entries for terminal emulators which do not 22542# support VT100 SI/SO when processing UTF-8 encoding -TD 22543# * add xterm-utf8 as a demo of the U8 feature -TD 22544# 22545# 2011-02-20 22546# * add cons25-debian entry (Brian M Carlson, Debian #607662). 22547# 22548# 2011-06-11 22549# * update minix entry to minix 3.2 (Thomas Cort). 22550# 22551# 2011-07-09 22552# * fix inconsistent tabset path in pcmw (Todd C. Miller). 22553# * remove a backslash which continued comment, obscuring altos3 22554# definition with OpenBSD toolset (Nicholas Marriott). 22555# 22556# 2011-07-16 22557# * add/use xterm+tmux chunk from xterm #271 -TD 22558# * resync xterm-new entry from xterm #271 -TD 22559# * add E3 extended capability to linux-basic (Miroslav Lichvar) 22560# * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD 22561# * add SI/SO change to linux2.6 entry (Debian #515609) -TD 22562# 22563# 2011-07-21 22564# * add kich1 to sun (Yuri Pankov) 22565# * use bold rather than reverse for smso in sun-color (Yuri Pankov). 22566# 22567# 2011-08-06 22568# * corrected k9 in dg460-ansi, add other features based on manuals -TD 22569# 22570# 2011-08-20 22571# * minor cleanup of X-terminal emulator section -TD 22572# * add terminator entry -TD 22573# * add simpleterm entry -TD 22574# 22575######## SHANTIH! SHANTIH! SHANTIH! 22576