1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright (c) 1996, 2010, Oracle and/or its affiliates. All rights reserved. 24# Copyright 2022 Oxide Computer Company 25# 26 27@ _START_ 28 29# Message file for cmd/sgs/liblddbg. 30 31@ MSG_ID_LIBLDDBG 32 33 34# Usage messages 35 36@ MSG_USE_UNRECOG "warning: unrecognized debug option (try help): %s" 37@ MSG_USE_CNTNEGOPT "warning: ignoring non-negatable debug option: %s" 38 39@ MSG_USE_HDR_DCT "Display Control Tokens:" 40@ MSG_USE_HDR_CST "Category Selection Tokens:" 41@ MSG_USE_HDR_BOTH " [ld and ld.so.1]" 42@ MSG_USE_HDR_RTLD " [ld.so.1 only]" 43@ MSG_USE_HDR_LD " [ld only]" 44 45# TRANSLATION_NOTE - Use the following output in the C locale as reference 1. 46# 47# The runtime linker and link-editor support a shared debugging 48# facility. Options are selected via a comma separated list of tokens, 49# each of which specifies a display option or a category for which 50# information is desired. Many tokens apply to both linker components, 51# while some are specific to one or the other. Diagnostics are printed, 52# one per line, with a standard prefix prepended to each one. Diagnostic 53# output is sent to stderr unless otherwise redirected. 54 55# TRANSLATION_NOTE - The next series of messages makes the above output in C 56# locale. 57 58@ MSG_USE_R1_A "The runtime linker and link-editor support a \ 59 shared debugging" 60@ MSG_USE_R1_B "facility. Options are selected via a comma separated list \ 61 of tokens," 62@ MSG_USE_R1_C "each of which specifies a display option or a category \ 63 for which" 64@ MSG_USE_R1_D "information is desired. Many tokens apply to both linker \ 65 components," 66@ MSG_USE_R1_E "while some are specific to one or the other. Diagnostics \ 67 are printed," 68@ MSG_USE_R1_F "one per line, with a standard prefix prepended to each one. \ 69 Diagnostic" 70 71# TRANSLATION_NOTE -- do not translate "stderr" 72@ MSG_USE_R1_G "output is sent to stderr unless otherwise redirected." 73 74# TRANSLATION_NOTE - End of reference 1 75 76 77# TRANSLATION_NOTE - Use the following output in the C locale as reference 2. 78# 79# Runtime Linking (ld.so.1): 80# Diagnostics that trace the runtime linking of an application 81# can be enabled via the LD_DEBUG environment variable: 82# LD_DEBUG=token1,token2 app ... 83# In addition to the "output" token described below, diagnostic 84# output from the runtime linker can be redirected to an output 85# file using the additional environment variable: 86# LD_DEBUG_OUTPUT=file 87# If the "output" token and LD_DEBUG_OUTPUT are both specified, 88# the file specified by LD_DEBUG_OUTPUT is used. If LD_DEBUG_OUTPUT 89# is used, the output file name is suffixed with the process id. 90# An output file specified via the "output" token is used as 91# specified, without a process id suffix. Use of the "output" 92# token with programs that call fork() results in each process 93# writing debug output to the same file. The debug output will be 94# jumbled and incomplete. LD_DEBUG_OUTPUT should be used in such 95# cases to direct debug output for each process to a unique file. 96# 97# All runtime linker diagnostics are prepended with the process 98# id. If thread capabilities are enabled for the process, the 99# thread id is also shown. All Solaris applications are thread 100# capable, and a single threaded application may use threads via 101# the libraries it links to. Diagnostics from such applications 102# reference thread id 1. 103 104# TRANSLATION_NOTE - The next series of messages makes the above output in C 105# locale. 106 107@ MSG_USE_R2_A "Runtime Linking (ld.so.1):" 108@ MSG_USE_R2_B " Diagnostics that trace the runtime linking \ 109 of an application" 110 111# TRANSLATION_NOTE -- do not translate "LD_DEBUG" 112@ MSG_USE_R2_C " can be enabled via the LD_DEBUG environment variable:" 113 114# TRANSLATION_NOTE -- do not translate "LD_DEBUG" 115@ MSG_USE_R2_D " LD_DEBUG=token1,token2 app ..." 116 117# TRANSLATION_NOTE -- do not translate "output" 118@ MSG_USE_R2_E " In addition to the \"output\" token described \ 119 below, diagnostic" 120@ MSG_USE_R2_F " output from the runtime linker can be redirected to \ 121 an output" 122@ MSG_USE_R2_G " file using the additional environment variable:" 123 124# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" 125@ MSG_USE_R2_H " LD_DEBUG_OUTPUT=file" 126 127# TRANSLATION_NOTE -- do not translate "output" or "LD_DEBUG_OUTPUT" 128@ MSG_USE_R2_I " If the \"output\" token and LD_DEBUG_OUTPUT are \ 129 both specified," 130 131# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" 132@ MSG_USE_R2_J " the file specified by LD_DEBUG_OUTPUT is used. \ 133 If LD_DEBUG_OUTPUT" 134@ MSG_USE_R2_K " is used, the output file name is suffixed with \ 135 the process id." 136 137# TRANSLATION_NOTE -- do not translate "output" 138@ MSG_USE_R2_L " An output file specified via the \"output\" token \ 139 is used as" 140 141# TRANSLATION_NOTE -- do not translate "output" 142@ MSG_USE_R2_M " specified, without a process id suffix. Use \ 143 of the \"output\"" 144 145# TRANSLATION_NOTE -- do not translate "fork" 146@ MSG_USE_R2_N " token with programs that call fork() results in \ 147 each process" 148@ MSG_USE_R2_O " writing debug output to the same file. The debug \ 149 output will be" 150@ MSG_USE_R2_P " jumbled and incomplete. LD_DEBUG_OUTPUT should be \ 151 used in such" 152@ MSG_USE_R2_Q " cases to direct debug output for each process to \ 153 a unique file." 154 155 156@ MSG_USE_R2_R " All runtime linker diagnostics are prepended with \ 157 the process" 158@ MSG_USE_R2_S " id. If thread capabilities are enabled for the \ 159 process, the" 160@ MSG_USE_R2_T " thread id is also shown. All Solaris applications are \ 161 thread" 162@ MSG_USE_R2_U " capable, and a single threaded application may \ 163 use threads via" 164@ MSG_USE_R2_V " the libraries it links to. Diagnostics from such \ 165 applications" 166@ MSG_USE_R2_W " reference thread id 1." 167 168# TRANSLATION_NOTE - End of reference 2 169 170 171# TRANSLATION_NOTE - Use the following output in the C locale as reference 3. 172# 173# Link-Editing (ld): 174# Diagnostics that trace the link-editing of an application are 175# enabled using the -D option: 176# ld -Dtoken1,token2 -o prog ... 177# As compiler drivers may assign -D a different meaning, the 178# LD_OPTIONS environment variable is often used: 179# LD_OPTIONS=-Dtoken1,token2 cc -o prog ... 180# 181# The position of -D on the link-edit command line is significant. 182# Diagnostics are enabled when a debug token is first encountered, 183# and can be switched off by prepending the token with "!". 184# 185# Diagnostic output can be directed to a file using the "output" 186# token, The output file is used as specified, without a process 187# id suffix. 188# 189# All link-editor diagnostics are prepended with the string "debug". 190# 191 192# TRANSLATION_NOTE - The next series of messages makes the above output in C 193# locale. 194 195@ MSG_USE_R3_A " Link-Editing (ld):" 196@ MSG_USE_R3_B " Diagnostics that trace the link-editing of an \ 197 application are" 198@ MSG_USE_R3_C " enabled using the -D option:" 199@ MSG_USE_R3_D " ld -Dtoken1,token2 -o prog ..." 200@ MSG_USE_R3_E " As compiler drivers may assign -D a different meaning, the" 201 202# TRANSLATION_NOTE -- do not translate "LD_OPTIONS" 203@ MSG_USE_R3_F " LD_OPTIONS environment variable is often used:" 204 205# TRANSLATION_NOTE -- do not translate "LD_OPTIONS" 206@ MSG_USE_R3_G " LD_OPTIONS=-Dtoken1,token2 cc -o prog ..." 207 208@ MSG_USE_R3_H " The position of -D on the link-edit command line \ 209 is significant." 210@ MSG_USE_R3_I " Diagnostics are enabled when a debug token is \ 211 first encountered," 212@ MSG_USE_R3_J " and can be switched off by prepending the token \ 213 with \"!\"." 214 215# TRANSLATION_NOTE -- do not translate "output" 216@ MSG_USE_R3_K " Diagnostic output can be directed to a file using \ 217 the \"output\"" 218 219@ MSG_USE_R3_L " token, The output file is used as specified, \ 220 without a process" 221@ MSG_USE_R3_M " id suffix." 222 223 224# TRANSLATION_NOTE -- do not translate "debug" 225@ MSG_USE_R3_N " All link-editor diagnostics are prepended with the \ 226 string \"debug\"." 227 228# TRANSLATION_NOTE - End of reference 3 229 230 231# TRANSLATION_NOTE - Use the following output in the C locale as reference 4. 232# 233# demangle show C++ symbol names in their demangled form 234# detail provide more information in conjunction with 235# other options 236# dtime prepend a time delta to diagnostics. The value 237# appears as seconds.fraction, and represents 238# the elapsed time since that last diagnostic. 239# long display long object names without truncation 240# output=file debug output is sent to the named file 241# instead of stderr. If file is empty (\"\"), 242# following output will be sent to stderr. 243# ttime prepend a time stamp to diagnostics. The value 244# appears as seconds.fraction, and represents 245# the time since entering ld or ld.so.1. 246# Note, all diagnostics induce a probe affect, 247# which should be taken into account when 248# interpreting dtime and ttime information. 249# 250 251# TRANSLATION_NOTE - The next series of messages makes the above output in C 252# locale. 253 254# TRANSLATION_NOTE -- do not translate the first token "demangle". 255@ MSG_USE_R4_A " demangle show C++ symbol names in their \ 256 demangled form" 257 258# TRANSLATION_NOTE -- do not translate the first token "detail". 259@ MSG_USE_R4_B " detail provide more information in \ 260 conjunction with" 261@ MSG_USE_R4_B2 " other options" 262 263# TRANSLATION_NOTE -- do not translate the first token "dtime". 264@ MSG_USE_R4_C " dtime prepend a time delta to diagnostics. \ 265 The value" 266@ MSG_USE_R4_C2 " appears as seconds.fraction, and \ 267 represents" 268@ MSG_USE_R4_C3 " the elapsed time since that last \ 269 diagnostic." 270 271# TRANSLATION_NOTE -- do not translate the first token "long". 272@ MSG_USE_R4_D " long display long object names without \ 273 truncation" 274 275# TRANSLATION_NOTE -- do not translate the first token "output". 276@ MSG_USE_R4_E " output=file debug output is sent to the \ 277 named file" 278@ MSG_USE_R4_E2 " instead of stderr. If file is \ 279 empty (\"\")," 280@ MSG_USE_R4_E3 " following output will be \ 281 sent to stderr." 282 283# TRANSLATION_NOTE -- do not translate the first token "ttime". 284@ MSG_USE_R4_F " ttime prepend a time stamp to diagnostics. \ 285 The value" 286@ MSG_USE_R4_F2 " appears as seconds.fraction, and \ 287 represents" 288@ MSG_USE_R4_F3 " the time since entering ld or \ 289 ld.so.1." 290@ MSG_USE_R4_F4 " Note all diagnostics induce a \ 291 probe affect," 292@ MSG_USE_R4_F5 " which should be taken into \ 293 account when" 294@ MSG_USE_R4_F6 " interpreting dtime and ttime \ 295 information." 296 297# TRANSLATION_NOTE - End of reference 4 298 299 300# TRANSLATION_NOTE - Use the following output in the C locale as reference 5. 301# 302# lmid[=name] prepend link-map list id to diagnostics, and 303# optionally filter the lists: By default, 304# diagnostics are produced for all link-map 305# lists except that of the runtime linker 306# (ldso), without identification. "lmid" causes 307# the link-map list id to be prepended. 308# "name" limits diagnostics to the named 309# link-map list. Additional "lmid" tokens 310# can specify multiple link-map lists. 311# Valid names are: 312# all all link-map lists except ldso 313# alt all alternative link-map lists 314# alt[0-9]+ specific alternative link-map list 315# base the base, or main, link-map list 316# ldso the runtime linker link-map list 317# 318 319# TRANSLATION_NOTE - The next series of messages makes the above output in C 320# locale. 321 322 323# TRANSLATION_NOTE -- do not translate the first token "lmid". 324@ MSG_USE_R5_A " lmid[=name] prepend link-map list id to \ 325 diagnostics, and" 326@ MSG_USE_R5_A2 " optionally filter the lists: By \ 327 default," 328@ MSG_USE_R5_A3 " diagnostics are produced for all \ 329 link-map" 330@ MSG_USE_R5_A4 " lists except that of the runtime \ 331 linker" 332@ MSG_USE_R5_A5 " (ldso), without identification. \ 333 \"lmid\" causes" 334 335# TRANSLATION_NOTE -- do not translate "name" 336@ MSG_USE_R5_A6 " the link-map list id to be prepended." 337@ MSG_USE_R5_A7 " \"name\" limits diagnostics to the \ 338 named" 339@ MSG_USE_R5_A8 " link-map list. Additional \"lmid\" \ 340 tokens" 341@ MSG_USE_R5_A9 " can specify multiple link-map \ 342 lists." 343@ MSG_USE_R5_A0 " Valid names are:" 344 345# TRANSLATION_NOTE -- do not translate the token "all". 346@ MSG_USE_R5_B " all all link-map lists \ 347 except ldso" 348 349# TRANSLATION_NOTE -- do not translate the token "alt". 350@ MSG_USE_R5_C " alt all alternative \ 351 link-map lists" 352 353# TRANSLATION_NOTE -- do not translate the token "alt". 354@ MSG_USE_R5_D " alt[0-9]+ specific alt \ 355 link-map list" 356 357# TRANSLATION_NOTE -- do not translate the token "base". 358@ MSG_USE_R5_E " base base (main) \ 359 link-map list" 360@ MSG_USE_R5_F " ldso runtime linker \ 361 link-map list " 362# TRANSLATION_NOTE - End of reference 5 363 364 365# TRANSLATION_NOTE - Use the following output in the C locale as reference 6. 366# 367# name prepend output file basename to diagnostics 368# fullname prepend full output file name to diagnostics 369# class prepend output file elfclass (32/64) to 370# diagnostics 371# 372 373# TRANSLATION_NOTE - The next series of messages makes the above output in C 374# locale. 375 376# TRANSLATION_NOTE -- do not translate the first token "name". 377@ MSG_USE_R6_A " name prepend output file basename \ 378 to diagnostics" 379 380# TRANSLATION_NOTE -- do not translate the first token "fullname". 381@ MSG_USE_R6_B " fullname prepend full output file name \ 382 to diagnostics" 383 384# TRANSLATION_NOTE -- do not translate the first token "class". 385@ MSG_USE_R6_C " class prepend output file elfclass \ 386 (32/64) to" 387@ MSG_USE_R6_C2 " diagnostics" 388 389# TRANSLATION_NOTE - End of reference 6 390 391 392# TRANSLATION_NOTE - Use the following output in the C locale as reference 7. 393# 394# all display information for all categories 395# basic basic trace information/warnings 396# cap platform/machine/hardware/software capabilities 397# files input file processing (files and libraries) 398# help this help message 399# libs library search paths; detail flag shows 400# actual library lookup (-l) processing 401# move move sections 402# reloc relocations 403# symbols symbol tables; detail flag shows internal 404# symbol table addition and resolution (ld only) 405# tls thread local storage (TLS) 406# unused unused/unreferenced files; detail flag 407# shows unused sections (ld only) 408# versions ELF versioning 409 410# TRANSLATION_NOTE - The next series of messages makes the above output in C 411# locale. 412 413 414# TRANSLATION_NOTE -- do not translate the first token "all". 415@ MSG_USE_R7_A " all display information for \ 416 all categories" 417 418# TRANSLATION_NOTE -- do not translate the first token "basic". 419@ MSG_USE_R7_B " basic basic trace information/warnings" 420 421# TRANSLATION_NOTE -- do not translate the first token "cap". 422@ MSG_USE_R7_C " cap platform/machine/hardware/software \ 423 capabilities" 424 425# TRANSLATION_NOTE -- do not translate the first token "files". 426@ MSG_USE_R7_D " files input file processing (files \ 427 and libraries)" 428 429# TRANSLATION_NOTE -- do not translate the first token "help". 430@ MSG_USE_R7_E " help this help message" 431 432# TRANSLATION_NOTE -- do not translate the first token "libs". 433@ MSG_USE_R7_F " libs library search paths; detail \ 434 flag shows" 435@ MSG_USE_R7_F2 " actual library lookup (-l) \ 436 processing" 437 438# TRANSLATION_NOTE -- do not translate the first token "move". 439@ MSG_USE_R7_G " move move sections" 440 441# TRANSLATION_NOTE -- do not translate the first token "reloc". 442@ MSG_USE_R7_H " reloc relocations" 443 444# TRANSLATION_NOTE -- do not translate the first token "symbols". 445@ MSG_USE_R7_I " symbols symbol tables; detail flag shows \ 446 internal" 447@ MSG_USE_R7_I2 " symbol table addition/resolution \ 448 (ld only)" 449 450# TRANSLATION_NOTE -- do not translate the first token "tls". 451@ MSG_USE_R7_J " tls thread local storage (TLS)" 452 453# TRANSLATION_NOTE -- do not translate the first token "unused". 454@ MSG_USE_R7_K " unused unused/unreferenced files; \ 455 detail flag" 456@ MSG_USE_R7_K2 " shows unused sections (ld only)" 457 458# TRANSLATION_NOTE -- do not translate the first token "versions". 459@ MSG_USE_R7_L " versions ELF versioning" 460 461# TRANSLATION_NOTE - End of reference 7 462 463 464# TRANSLATION_NOTE - Use the following output in the C locale as reference 8. 465# 466# audit runtime link-audit processing 467# bindings symbol binding; detail flag shows 468# absolute:relative addresses 469# callback user supplied code executed by ld.so.1 470# (i.e. dl_iterate_phdr) 471# init init and fini processing 472 473 474# TRANSLATION_NOTE - The next series of messages makes the above output in C 475# locale. 476 477 478# TRANSLATION_NOTE -- do not translate the first token "audit". 479@ MSG_USE_R8_A " audit runtime link-audit processing" 480 481# TRANSLATION_NOTE -- do not translate the first token "bindings". 482@ MSG_USE_R8_B " bindings symbol binding; detail flag shows" 483@ MSG_USE_R8_B2 " absolute:relative addresses" 484 485# TRANSLATION_NOTE -- do not translate the first token "dl". 486@ MSG_USE_R8_C " dl user calls to the dl*() family" 487 488# TRANSLATION_NOTE -- do not translate the first token "init". 489@ MSG_USE_R8_D " init init and fini processing" 490 491# TRANSLATION_NOTE - End of reference 8 492 493 494# TRANSLATION_NOTE - Use the following output in the C locale as reference 9. 495# 496# args input arguments 497# entry entrance criteria descriptors 498# got GOT symbol information 499# map mapfile processing 500# sections input sections 501# segments output segments and address/offset processing; 502# detail flag shows associated sections 503# statistics symbol table and relocation statistics 504# strtab string table compression statistics; 505# detail flag shows layout of string tables 506# support support libraries 507 508# TRANSLATION_NOTE - The next series of messages makes the above output in C 509# locale. 510 511# TRANSLATION_NOTE -- do not translate the first token "args". 512@ MSG_USE_R9_A " args input arguments" 513 514# TRANSLATION_NOTE -- do not translate the first token "entry". 515@ MSG_USE_R9_B " entry entrance criteria descriptors" 516 517# TRANSLATION_NOTE -- do not translate the first token "got". 518@ MSG_USE_R9_C " got GOT symbol information" 519 520# TRANSLATION_NOTE -- do not translate the first token "map". 521@ MSG_USE_R9_D " map mapfile processing" 522 523# TRANSLATION_NOTE -- do not translate the first token "sections". 524@ MSG_USE_R9_E " sections input sections" 525 526# TRANSLATION_NOTE -- do not translate the first token "segments". 527@ MSG_USE_R9_F " segments output segments and address/offset \ 528 processing;" 529@ MSG_USE_R9_F2 " detail flag shows associated \ 530 sections" 531 532# TRANSLATION_NOTE -- do not translate the first token "statistics". 533@ MSG_USE_R9_G " statistics symbol table and relocation \ 534 statistics" 535 536# TRANSLATION_NOTE -- do not translate the first token "strtab". 537@ MSG_USE_R9_H " strtab string table compression statistics;" 538@ MSG_USE_R9_H2 " detail flag shows layout of \ 539 string tables" 540 541# TRANSLATION_NOTE -- do not translate the first token "support". 542@ MSG_USE_R9_I " support support libraries" 543 544# TRANSLATION_NOTE - End of reference 9 545 546 547# Basic processing (ld). 548 549@ MSG_BASIC_COLLECT "collect relocations" 550@ MSG_BASIC_CREATE "create output image" 551@ MSG_BASIC_FILES "process files" 552@ MSG_BASIC_FINISHED "processing finished" 553@ MSG_BASIC_OPTIONS "process options" 554@ MSG_BASIC_RELOCATE "relocate output image" 555@ MSG_BASIC_VALIDATE "validating symbols" 556 557# Argument messages 558 559@ MSG_ARG_OPTION "arg[%d]\toption=-%c" 560@ MSG_ARG_OPTARG "arg[%d]\toption=-%c: option-argument: %s" 561@ MSG_ARG_STR2CHR "arg[%d]\toption=-%s: translated: new option=-%c" 562@ MSG_ARG_WLDEL "arg[%d]\toption=-W%s: translated: prefix -Wl,: \ 563 removed" 564@ MSG_ARG_FILE "arg[%d]\tfile=%s" 565 566# Bindings messages 567# NOTE: these are used by appcert(1) and lari(1), use care when changing. 568 569@ MSG_BND_BASIC "binding file=%s to file=%s: symbol '%s'" 570@ MSG_BND_PLT "binding file=%s (%#llx:%#llx) at plt[%lld]:%s to \ 571 file=%s (%#llx:%#llx): symbol '%s'%s" 572@ MSG_BND_DLSYM "binding file=%s (dlsym) to file=%s \ 573 (%#llx:%#llx): symbol '%s'%s" 574@ MSG_BND_DEFAULT "binding file=%s (%#llx:%#llx) to file=%s \ 575 (%#llx:%#llx): symbol '%s'%s" 576@ MSG_BND_WEAK_1 "binding file=%s to 0x0 (undefined weak): symbol '%s'" 577@ MSG_BND_WEAK_2 "binding file=%s (%#llx:%#llx) to 0x0 \ 578 (undefined weak): symbol '%s'" 579 580# NOTE: the rejected message is used by lari(1), use care when changing. This 581# message is formatted to conform to the pattern used by the MSG_BINFO messages. 582@ MSG_BND_REJECT "binding file=%s to file=%s: symbol '%s' \ 583 (rejected: %s)" 584@ MSG_BNDREJ_DIRECT "attempt to directly bind to a NODIRECT definition" 585@ MSG_BNDREJ_GROUP "attempt to bind within a group to a NODIRECT \ 586 definition" 587@ MSG_BNDREJ_SINGLE "attempt to bind to a SINGLETON definition without \ 588 following default search model" 589 590@ MSG_BND_PLTPAD_TO " pltpad: %#llx: file=%s bound to file=%s: \ 591 symbol '%s'" 592@ MSG_BND_PLTPAD_FROM " pltpad: %#llx: bound from file=%s: symbol '%s'" 593 594@ MSG_BND_PSUM_SPARCV9 "Summary of PLT types bound: 21d=%d, 24d=%d, u32=%d, \ 595 u44=%d, full=%d, far=%d, Total=%d" 596@ MSG_BND_PSUM_SPARC "Summary of PLT types bound: 21d=%d, 24d=%d, \ 597 full=%d, Total=%d" 598@ MSG_BND_PSUM_DEFAULT "Summary of PLT types bound: total=%d" 599 600# Relocation messages 601 602@ MSG_REL_GENERATE "generating input relocations: section=%s" 603@ MSG_REL_COLLECT "collecting input relocations: section=%s, file=%s" 604@ MSG_REL_ACTIVE "performing active relocations" 605@ MSG_REL_CREATING "creating output relocations" 606@ MSG_REL_START "relocation processing: file=%s%s" 607@ MSG_REL_FINISH "relocation processing: file=%s; finished%s" 608@ MSG_REL_NONE "relocation processing: file=%s%s; nothing to do" 609 610@ MSG_REL_PLT " (plt processing only)" 611@ MSG_REL_FAIL " (failed)" 612 613@ MSG_REL_BADROFFSET "<offset lies outside memory image; \ 614 relocation discarded>" 615 616@ MSG_REL_TRANSITION "relocation: %s: section=%s; input from file=%s; \ 617 offset=0x%llx; symbol=%s; transitioned to: %s" 618@ MSG_REL_DISCARDED "relocation against discarded section=%s from file=%s; \ 619 relocation type=%s offset=0x%llx; relocation discarded" 620@ MSG_REL_COPY "copy data from file=%s to file=%s: symbol '%s'%s" 621@ MSG_REL_SLOPPYCOMDAT "the following relocation references a discarded \ 622 section; relocation redirected to section %s in \ 623 file %s" 624 625# Entrance criteria messages 626 627@ MSG_ECR_TITLE "Segment Entrance Criteria Descriptor List" 628@ MSG_ECR_DESC "entrance descriptor[%u]" 629 630 631# Elf Data (section) messages 632# TRANSLATION_NOTE - the following two entries provide for a series of one or 633# more standard 32-bit Elf_Data entries that align with the initial title. 634 635@ MSG_EDATA_TITLE_32 " addr type size offset al file" 636@ MSG_EDATA_ENTRY_32 " %3s %#10llx %-5s %#10llx %#8llx %2lld %s %s%s" 637 638# TRANSLATION_NOTE - the following two entries provide for a series of one or 639# more standard 64-bit Elf_Data entries that align with the initial title. 640 641@ MSG_EDATA_TITLE_64 " addr type \ 642 size offset al file" 643@ MSG_EDATA_ENTRY_64 " %3s %#18llx %-5s %#18llx %#16llx %2lld %s %s%s" 644 645@ MSG_EDATA_IGNSCN " (section ignored)" 646 647# File messages 648 649@ MSG_FIL_BASIC "file=%s [ %s ]" 650@ MSG_FIL_ARCHIVE "file=%s [ archive ] %s" 651@ MSG_FIL_SKIP_1 "file=%s; skipped: already processed as %s" 652@ MSG_FIL_SKIP_2 "file=%s; skipped: already processed" 653@ MSG_FIL_REUSE "file=%s; reusing: originally processed as %s" 654@ MSG_FIL_PROT "file=%s; modifying memory protections (%c PROT_WRITE)" 655@ MSG_FIL_DELETE "file=%s; deleting" 656@ MSG_FIL_CLEANUP "file=%s; loading failed: cleaning up lmco 0x%llx" 657@ MSG_FIL_LAZYLOAD "file=%s; lazy loading from file=%s: symbol=%s" 658@ MSG_FIL_PRELOAD "file=%s; preloading" 659@ MSG_FIL_NEEDED "file=%s; needed by %s" 660@ MSG_FIL_FILTER_1 "file=%s; filter for %s (configuration definition)" 661@ MSG_FIL_FILTER_2 "file=%s; filter for %s" 662@ MSG_FIL_FILTEE_2 "file=%s; filtee processing failed" 663@ MSG_FIL_FILTEE_3 "file=%s; filtee skipped (auditor directed)" 664@ MSG_FIL_FIXNAME "file=%s; required name=%s" 665@ MSG_FIL_PROMOTE "file=%s; promoting mode to %s" 666@ MSG_FIL_DEFERRED "file=%s; deferred dependency exchanged for file=%s" 667@ MSG_FIL_ELF "file=%s [ ELF ]; generating link map%s" 668@ MSG_FIL_LDSO "file=%s [ ELF ]" 669 670# NOTE: these are used by lari(1), use care when changing. 671@ MSG_FIL_ANALYZE "file=%s; analyzing %s" 672@ MSG_FIL_FILTEE_1 "file=%s; filtered by %s" 673@ MSG_FIL_CONFIG "file=%s [ ELF ]; configuration alternate found: %s" 674 675 676@ MSG_FIL_DATA_AS " addr: %#18llx size: %#18llx" 677@ MSG_FIL_DATA_LL " lmid: %18.18s lmco: %#18llx" 678@ MSG_FIL_DATA_EA " envp: %#18llx auxv: %#18llx" 679 680@ MSG_FIL_MMAPOBJ "file=%s mmapobj entries=%d" 681@ MSG_FIL_MMAPOBJ_1 " [%d]: addr: %#18llx fsize: %#18llx %s" 682@ MSG_FIL_MMAPOBJ_2 " offset: %#17llx msize: %#18llx" 683 684@ MSG_FIL_BND_ADD "file=%s; add binding to:" 685@ MSG_FIL_BND_FILE " file=%s %s" 686 687@ MSG_FIL_DEP_TITLE "processing %s dependencies %s:" 688@ MSG_FIL_DEP_NONE " file=%s; has no dependencies" 689@ MSG_FIL_DEP_ENT " file=%s; depends on:" 690 691@ MSG_FIL_DEP_ADD " file=%s; object added %s %s" 692@ MSG_FIL_DEP_UPDATE " file=%s; object updated %s %s" 693@ MSG_FIL_DEP_DELETE " file=%s; object deleting %s" 694@ MSG_FIL_DEP_REMOVE " file=%s; object removed from handle %s" 695@ MSG_FIL_DEP_REMAIN " file=%s; object must remain on handle %s" 696@ MSG_FIL_DEP_ORPHAN " file=%s; object remains on orphan handle %s" 697@ MSG_FIL_DEP_REINST " file=%s; object reinstated %s" 698 699@ MSG_FIL_HDL_CREATE "handle=%s; creating %s 0x%llx:" 700@ MSG_FIL_HDL_ADD "handle=%s; adding dependent objects %s:" 701@ MSG_FIL_HDL_DELETE "handle=%s; inspecting for deletion:" 702@ MSG_FIL_HDL_ORPHAN "handle=%s; deletion cannot be completed: moving to \ 703 orphan list:" 704@ MSG_FIL_HDL_REINST "handle=%s; reinstating from orphan list:" 705 706@ MSG_FIL_HDL_COLLECT "handle=%s; collected for possible removal %s" 707@ MSG_FIL_HDL_RETAIN "handle=%s; externally referenced from %s: handle \ 708 retained" 709@ MSG_FIL_DEL_RESCAN "pending deletions; rescanning orphan list for \ 710 available deletions" 711 712@ MSG_FIL_AR_RESCAN "rescanning archives from args[%d-%d]; additional \ 713 members may satisfy prior extractions" 714 715@ MSG_FIL_CONFIG_ERR "configuration file=%s: %s" 716@ MSG_FIL_CONFIG_ERR_1 "ignored (configuration building)" 717@ MSG_FIL_CONFIG_ERR_2 "invalid version" 718@ MSG_FIL_CONFIG_ERR_3 "unable to process file" 719@ MSG_FIL_CONFIG_ERR_4 "corrupt or truncated file" 720@ MSG_FIL_CONFIG_ERR_5 "incompatible ELF class, byte order, or machine \ 721 architecture" 722 723@ MSG_FIL_MODIFIED "file=%s; open modified by support library: %s" 724@ MSG_FIL_NAMECHANGE " name changed to: %s" 725@ MSG_FIL_FDCHANGE " file descriptor changed from: %d to: %d %s" 726@ MSG_FIL_ELFCHANGE " ELF descriptor changed from: 0x%llx to: 0x%llx %s" 727@ MSG_FIL_IGNORE " (file will be ignored)" 728 729@ MSG_CNTL_TITLE "control list processing complete: moving lmco 0x%llx \ 730 to lmco 0x%llx" 731 732@ MSG_REJ_MACH "file=%s; rejected: wrong machine type: %s" 733@ MSG_REJ_CLASS "file=%s; rejected: wrong ELF class: %s" 734@ MSG_REJ_DATA "file=%s; rejected: wrong ELF data format: %s" 735@ MSG_REJ_TYPE "file=%s; rejected: bad ELF type: %s" 736@ MSG_REJ_BADFLAG "file=%s; rejected: bad ELF flags value: %s" 737@ MSG_REJ_MISFLAG "file=%s; rejected: mismatched ELF flags value: %s" 738@ MSG_REJ_VERSION "file=%s; rejected: mismatched ELF/lib version: %s" 739@ MSG_REJ_HAL "file=%s; rejected: HAL R1 extensions required" 740@ MSG_REJ_US3 "file=%s; rejected: Sun UltraSPARC III extensions \ 741 required" 742@ MSG_REJ_STR "obj=%s; rejected: %s" 743@ MSG_REJ_UNKFILE "obj=%s; rejected: unknown file type" 744@ MSG_REJ_UNKCAP "obj=%s; rejected: unknown capability: %d" 745@ MSG_REJ_HWCAP_1 "obj=%s; rejected: hardware capability (CA_SUNW_HW_1) \ 746 unsupported: %s" 747@ MSG_REJ_SFCAP_1 "obj=%s; rejected: software capability (CA_SUNW_SF_1) \ 748 unsupported: %s" 749@ MSG_REJ_MACHCAP "obj=%s; rejected: machine capability (CA_SUNW_MACH) \ 750 unsupported: %s" 751@ MSG_REJ_PLATCAP "obj=%s; rejected: platform capability (CA_SUNW_PLAT) \ 752 unsupported: %s" 753@ MSG_REJ_HWCAP_2 "obj=%s; rejected: hardware capability (CA_SUNW_HW_2) \ 754 unsupported: %s" 755@ MSG_REJ_ARCHIVE "obj=%s; rejected: archive unsed incorrectly" 756@ MSG_REJ_KMOD "obj=%s; rejected: kernel module" 757@ MSG_REJ_HWCAP_3 "obj=%s; rejected: hardware capability (CA_SUNW_HW_3) \ 758 unsupported: %s" 759 760# Libs messages 761 762@ MSG_LIB_INITPATH "Library Search Paths (initial)" 763@ MSG_LIB_UPPATH "Library Search Paths (-L updated)" 764@ MSG_LIB_LOPT "find lib=-l%s; path=%s" 765@ MSG_LIB_REQUIRED "find lib=%s; path=%s (required by %s)" 766@ MSG_LIB_LDLIBPATH " search path=%s (LD_LIBRARY_PATH)" 767@ MSG_LIB_LDLIBPATHC " search path=%s (configuration LD_LIBRARY_PATH - %s)" 768@ MSG_LIB_RUNPATH " search path=%s (RUNPATH/RPATH from file %s)" 769@ MSG_LIB_DEFAULT " search path=%s (default)" 770@ MSG_LIB_DEFAULTC " search path=%s (configuration default - %s)" 771@ MSG_LIB_TDEFAULT " search path=%s (trusted default)" 772@ MSG_LIB_TDEFAULTC " search path=%s (trusted configuration default - %s)" 773@ MSG_LIB_LIBPATH " search path=%s (LIBPATH or -YP)" 774@ MSG_LIB_YPATH " search path=%s replaces path=%s (-Y%c)" 775 776@ MSG_LIB_FIND "find object=%s; searching" 777@ MSG_LIB_TRYING " trying path=%s%s" 778@ MSG_LIB_ALTER " trying path=%s (auditor returned alternative)" 779@ MSG_LIB_SKIP " skip path=%s (auditor directed)" 780@ MSG_LIB_IGNORE " ignore path=%s (insecure directory name)" 781@ MSG_LIB_INUSE " use path=%s (implicitly secure, as directory \ 782 has already provided dependencies)" 783 784# Mapfile messages 785 786@ MSG_MAP_MAPFILE "mapfile=%s; version=%d (%s)" 787@ MSG_MAP_SEG "segment directive; line=%llu; %s" 788@ MSG_MAP_SEG_ORDER "segment order directive; line=%llu; list_cnt=%lld; %s" 789@ MSG_MAP_CAP "capability directive; line=%llu" 790@ MSG_MAP_EC "entrance criteria; line=%llu; added" 791@ MSG_MAP_OS_ORDER "output section ordering; line=%llu; segment=%s \ 792 section=%s; index=%d" 793@ MSG_MAP_HDR_NOALLOC "header noalloc directive; line=%llu; first loadable \ 794 segment will not contain ELF and program headers" 795 796@ MSG_MAP_SYM_SCOPE "symbol scope definition" 797@ MSG_MAP_SYM_SIZE "size-symbol directive; line=%llu; segment=%s; \ 798 symbol=%s; %s" 799@ MSG_MAP_SYM_VER_1 "%s, %s; symbol=%s (%s)" 800@ MSG_MAP_SYM_VER_2 "%s; symbol=%s (%s)" 801 802@ MSG_MAP_DV "depend versions directive; line=%llu, object=%s" 803@ MSG_MAP_DV_ENTRY "%12.12s %s; line=%llu" 804 805@ MSG_MAP_SORT_TITLE "mapfile additions: segment sorting required" 806@ MSG_MAP_SORT_TITLE_O "before:" 807@ MSG_MAP_SORT_TITLE_S "after:" 808@ MSG_MAP_POST_TITLE "mapfile post processing" 809@ MSG_MAP_ENT_ORD_TITLE "set entrance criteria input section sort keys; \ 810 segment=%s" 811 812@ MSG_MAP_ID_ADD "%s: %lld: enter conditional expression id: %s" 813@ MSG_MAP_ID_CLEAR "%s: %lld: delete conditional expression id: %s" 814@ MSG_MAP_PASS "%s: %lld: input enabled by %s" 815@ MSG_MAP_NOPASS "%s: %lld: input disabled by %s" 816 817# Move messages 818 819@ MSG_MOVE_FILE "file=%s processing move data" 820 821@ MSG_MOVE_TITLE1 " i/o offset size repeat stride \ 822 value with respect to" 823@ MSG_MOVE_TITLE2 " i/o address size repeat stride \ 824 value with respect to" 825 826@ MSG_MOVE_ENTRYIN " in %#10llx %6d %6d %6d %#16llx %s" 827@ MSG_MOVE_ENTRYOUT " out %#10llx %6d %6d %6d %#16llx %s" 828@ MSG_MOVE_EXPAND " %#10llx %#16llx (expanded)" 829 830@ MSG_MOVE_ADJEXPAND "for symbol=%s roffset: new=0x%llx" 831@ MSG_MOVE_ADJMOVE "for symbol=%s roffset: from=0x%llx, to=0x%llx" 832@ MSG_MOVE_OUTSCTADJ "adjusting addend for symbol=%s" 833@ MSG_MOVE_PAREXPN "expanding symbol=%s into .data: %s" 834@ MSG_MOVE_OUTMOVE "copying move entries for symbol=%s into .SUNW_move" 835@ MSG_MOVE_INPUT "collecting move entries: file=%s" 836@ MSG_MOVE_BAD "move %lld offset invalid: %s: offset=0x%llx \ 837 lies outside memory image; move discarded" 838 839# Section header messages 840 841@ MSG_SHD_MODIFIED "section=%s; section header modified by support \ 842 library: %s" 843@ MSG_SHD_ORIG " original:" 844@ MSG_SHD_NEW " new:" 845 846# TRANSLATION_NOTE - The following two items are used following a number in 847# the MSG_SHD_OFFSET_ENT_XX format strings below. For example "1 entry" 848# or "23 entries". 849# 850@ MSG_SHD_ENTRY_1 "entry" 851@ MSG_SHD_ENTRY_N "entries" 852 853 854# Section messages 855 856@ MSG_SEC_BACKING "mapfile symbol definitions: create backing storage:" 857 858@ MSG_SEC_INPUT "section=%s; input from file=%s" 859@ MSG_SEC_INPUT_GEN "section=%s" 860@ MSG_SEC_INPUT_GENSTR "section=%s; input generated merged string section" 861@ MSG_SEC_ADDED "section=%s; added to segment=%s" 862@ MSG_SEC_CREATED "section=%s; added to segment=%s (created)" 863@ MSG_SEC_REDIRECTED "section=%s; redirected to section=%s" 864@ MSG_SEC_DISCARDED "section=%s; input from file=%s; \ 865 discarded in favor of section=%s; file=%s" 866 867@ MSG_SEC_GNU_COMDAT_1 "section=%s; identified as COMDAT with \ 868 relaxed relocations enabled" 869@ MSG_SEC_GNU_COMDAT_2 "section=%s; identified as COMDAT" 870@ MSG_SEC_GNU_COMDAT_3 "section=%s; relaxed relocations enabled" 871 872@ MSG_SEC_GRP_DEFINE "section=%s; input from file=%s; defines %s\ 873 group: signature symbol: %s" 874@ MSG_SEC_GRP_MEMBER "section=%s; input from file=%s; member of %s\ 875 group: signature symbol: %s" 876@ MSG_SEC_GRP_DISCARDED "section=%s; input from file=%s; discarded in \ 877 favor of group: signature symbol: %s: file=%s" 878 879@ MSG_SEC_STRMERGE_DISCARDED "section=%s; input from file=%s; \ 880 discarded in favor of generated merged string section" 881@ MSG_SEC_STRMERGE_UNSUP "section=%s; input from file=%s; sh_addralign=%lld; \ 882 sh_entsize=%lld; unable to merge sections with this \ 883 size and alignment" 884 885@ MSG_SEC_STRTAB_STND "strtab=%s; full size: %lld; uncompressed" 886@ MSG_SEC_STRTAB_COMP "strtab=%s; full size: %lld; compressed down to: %lld" 887@ MSG_SEC_GENSTR_COMP "section=%s (generated merged string section); \ 888 full size: %lld; compressed down to: %lld" 889@ MSG_SEC_STRTAB_HD "strtab=%s; compression information [%d buckets]:" 890@ MSG_SEC_STRTAB_BCKT " bucket[%d]:" 891@ MSG_SEC_STRTAB_MSTR " [%lld] %s <master>" 892@ MSG_SEC_STRTAB_SUFSTR " [%lld] %s <suffix of: %s>" 893 894# Unused messages 895 896@ MSG_USD_SEC "section=%s; size=0x%llx; input from file=%s; \ 897 unused: does not satisfy any references%s" 898@ MSG_USD_SECDISCARD "; discarded" 899@ MSG_USD_FILE "file=%s unused: does not satisfy any references" 900@ MSG_USD_NEEDSTR "file=%s unused: unable to determine use" 901@ MSG_USD_UNREF "file=%s unreferenced: unused dependency of %s" 902@ MSG_USD_FILECYCLIC "file=%s unused: cyclic group [%d] member: \ 903 unreferenced outside of group" 904@ MSG_USD_LCINTERFACE "file=%s unused interface [%s]: using interface \ 905 from previously loaded object: file=%s" 906 907@ MSG_USD_LDLIBPATH " search path=%s unused: LD_LIBRARY_PATH entry" 908@ MSG_DUP_LDLIBPATH " search path=%s unused: (duplicate) LD_LIBRARY_PATH \ 909 entry" 910@ MSG_USD_LDLIBPATHC " search path=%s unused: configuration \ 911 LD_LIBRARY_PATH entry - %s" 912@ MSG_DUP_LDLIBPATHC " search path=%s unused: (duplicate) configuration \ 913 LD_LIBRARY_PATH entry - %s" 914@ MSG_USD_RUNPATH " search path=%s unused: RUNPATH/RPATH from file %s" 915 916# Segment messages 917 918@ MSG_SEG_DESC_INUSE "Program Header / Segment Descriptor List (in use)" 919@ MSG_SEG_DESC_AVAIL "Program Header / Segment Descriptor List (available)" 920 921 922# Support messages 923 924@ MSG_SUP_REQ "support object request=%s (%s)" 925@ MSG_SUP_REQ_ENV "supplied via SGS_SUPPORT" 926@ MSG_SUP_REQ_CMD "supplied via -S" 927 928@ MSG_SUP_ROUTINE " support object=%s: provides routine %s" 929 930@ MSG_SUP_CALLING_1 " calling routine=%s (%s)" 931@ MSG_SUP_CALLING_2 " calling routine=%s (%s) %s=%s" 932@ MSG_SUP_VNONE " unloading object=%s: version=LD_SUP_VNONE" 933@ MSG_SUP_OUTFILE "output file" 934@ MSG_SUP_INFILE "input file" 935@ MSG_SUP_INSEC "input section" 936@ MSG_SUP_SEC "section" 937 938# Symbol strings 939@ MSG_SYM_AR_FILE "symbol table processing; input file=%s [ archive ] %s" 940@ MSG_SYM_AR_SKIP "file=%s, symbol=%s, skipped" 941@ MSG_SYM_AR_CHECK "file=%s(%s), symbol=%s, checking for tentative or \ 942 restricted visibility override" 943@ MSG_SYM_AR_RESOLVE "file=%s(%s), symbol=%s, resolves undefined or \ 944 tentative symbol" 945@ MSG_SYM_AR_FORCE "file=%s(%s), forced extraction" 946 947@ MSG_SYM_SPECIAL "symbol table processing; building special symbols" 948@ MSG_SYM_PROCESS "symbol table processing; input file=%s [ %s ]" 949@ MSG_SYM_FINAL "symbol table processing; final update" 950@ MSG_SYM_INDEX "symbol table processing; determining section \ 951 symbol's index" 952@ MSG_SYM_BSS "symbol table processing; assigning to bss \ 953 (possible copy relocations)" 954@ MSG_SYM_REDUCED "symbol table processing; reducing global symbols" 955@ MSG_SYM_RETAINING "symbol table processing; retaining local symbols" 956@ MSG_SYM_VERSION "symbol table processing; adding version symbols" 957@ MSG_SYM_CAPABILITIES "symbol table processing; adding local capabilities \ 958 symbols" 959 960@ MSG_SYM_BASIC "symbol[%d]=%s" 961@ MSG_SYM_ADDING "symbol[%d]=%s (global); adding" 962@ MSG_SYM_SECTION "symbol[%d]=%s (section); segment=%s" 963@ MSG_SYM_RESOLVING "symbol[%d]=%s (global); resolving [%d][%d]" 964@ MSG_SYM_UPDATE "symbol=%s; updated" 965@ MSG_SYM_CREATE "symbol=%s; creating" 966@ MSG_SYM_REDUCING "symbol=%s; reducing to local" 967@ MSG_SYM_ELIMINATING "symbol=%s; eliminating" 968@ MSG_SYM_NOTELIMINATE "symbol=%s; not eliminated: referenced by \ 969 section=%s, entry[%d]" 970@ MSG_SYM_DISCARD_SEC "symbol=%s; discarded: originates from unused or \ 971 discarded section=%s from file=%s" 972@ MSG_SYM_DISCARD_FILE "symbol=%s; discarded: originates from unused or \ 973 discarded file=%s" 974@ MSG_SYM_DISCARD_DUP "symbol[%d]=%s; discarded duplicate: originates from \ 975 file=%s" 976@ MSG_SYM_WRAP "symbol[%d]=%s renamed to %s (-z wrap)" 977@ MSG_SYM_CAP_ORIG "symbol[%d]=%s converting to symbol capability \ 978 (-z symbolcap)" 979@ MSG_SYM_CAP_LOCAL "symbol[%d]=%s creating local capability \ 980 (-z symbolcap)" 981@ MSG_SYM_COPY_DST "symbol=%s; copy destination: alignment: 0x%x" 982@ MSG_SYM_COPY_REF "symbol=%s; copy reference" 983 984@ MSG_SYM_LOOKUP "symbol=%s; lookup in file=%s [ %s ]" 985 986@ MSG_DLSYM_1 "symbol=%s; dlsym() called from file=%s %s %s" 987@ MSG_DLSYM_2 "symbol=%s; dlsym() called from file=%s; starting \ 988 at file=%s %s %s" 989 990@ MSG_CAP_SYM_DEFAULT " symbol=%s[%u]: capability family default" 991@ MSG_CAP_SYM_USED " symbol=%s[%u]: used" 992@ MSG_CAP_SYM_CANDIDATE " symbol=%s[%u]: capability candidate" 993@ MSG_CAP_SYM_REJECTED " symbol=%s[%u]: capability rejected" 994@ MSG_CAP_SYM_HW_1 " symbol=%s[%u]: capability specific \ 995 (CA_SUNW_HW_1): [ %s ]" 996@ MSG_CAP_SYM_SF_1 " symbol=%s[%u]: capability specific \ 997 (CA_SUNW_SF_1): [ %s ]" 998@ MSG_CAP_SYM_MACH " symbol=%s[%u]: capability specific \ 999 (CA_SUNW_MACH): [ %s ]" 1000@ MSG_CAP_SYM_PLAT " symbol=%s[%u]: capability specific \ 1001 (CA_SUNW_PLAT): [ %s ]" 1002@ MSG_CAP_SYM_HW_2 " symbol=%s[%u]: capability specific \ 1003 (CA_SUNW_HW_2): [ %s ]" 1004@ MSG_CAP_SYM_HW_3 " symbol=%s[%u]: capability specific \ 1005 (CA_SUNW_HW_3): [ %s ]" 1006 1007@ MSG_SYM_LAZY_RESCAN "rescanning for lazy dependencies for symbol: %s" 1008 1009@ MSG_SYM_DUPSORTADDR "section %s: symbol '%s' and symbol '%s' have the \ 1010 same address: %#llx" 1011 1012@ MSG_SYM_IGNGNUVER "symbol=%s; hash index=%d; version=%d; skipping \ 1013 symbol with GNU version hidden bit set in file=%s" 1014 1015# Syminfo string 1016 1017@ MSG_SYMINFO_INFO "syminfo information" 1018 1019 1020# Version strings 1021 1022@ MSG_VER_AVAIL_1 "version availability: file=%s" 1023@ MSG_VER_AVAIL_2 " available version selected from" 1024@ MSG_VER_DEF_TITLE "version definition processing: file=%s" 1025@ MSG_VER_NEED_TITLE "version needed processing: file=%s" 1026@ MSG_VER_NOINTERFACE "version definition has no interface symbols: %s" 1027 1028# SHF_ORDERED related messages. Token used is sections. 1029 1030@ MSG_ORD_SORT_BEFORE "section=%s; requires output section reordering:" 1031@ MSG_ORD_SORT_AFTER "section=%s; output section reordered:" 1032@ MSG_ORD_HDR_1 " number of SHN_BEGIN=%u, ordered=%u, default=%u, \ 1033 SHN_AFTER=%u" 1034@ MSG_ORD_TITLE_1 " %s=SHN_BEGIN: section=%s from %s" 1035@ MSG_ORD_TITLE_2 " %s=SHN_AFTER: section=%s from %s" 1036@ MSG_ORD_TITLE_3 " sort key=%u: section=%s from %s, %s=%s" 1037 1038@ MSG_ORD_ERR_TITLE "the SHF_ORDERED section %s from %s has \ 1039 an error; flag ignored" 1040 1041@ MSG_ORD_ERR_INFORANGE " the sh_info field is out of range" 1042@ MSG_ORD_ERR_ORDER " the section pointed by sh_info is an ordered section" 1043@ MSG_ORD_ERR_LINKRANGE " the sh_link field is out of range" 1044@ MSG_ORD_ERR_FLAGS " the sh_flag is incorrect" 1045@ MSG_ORD_ERR_CYCLIC " the sh_link is cyclic" 1046@ MSG_ORD_ERR_LINKINV " a section pointed to by sh_link has an error" 1047 1048# Link-Auditing Messages 1049 1050@ MSG_AUD_LIB "auditor %s: required by: %s %s" 1051@ MSG_AUD_INTERFACE "auditor %s: provides interface: %s" 1052 1053@ MSG_AUD_VERSION "auditor %s: la_version(): %d: returned %d" 1054@ MSG_AUD_ACTIVITY "auditor %s: la_activity(): %s %s" 1055@ MSG_AUD_PREINIT "auditor %s: la_preinit(): %s" 1056@ MSG_AUD_OBJFILTER "auditor %s: la_objfilter(): %s: filtee=%s [ %s ]" 1057@ MSG_AUD_OBJFILTER_R "auditor %s: la_objfilter(): %s: returned 0 (filtee \ 1058 ignored)" 1059@ MSG_AUD_OBJOPEN "auditor %s: la_objopen(): %s" 1060@ MSG_AUD_OBJOPEN_R "auditor %s: la_objopen(): %s: returned %s" 1061@ MSG_AUD_OBJOPEN_RI "auditor %s: la_objopen(): %s: returned %s (flags \ 1062 ignored)" 1063@ MSG_AUD_OBJSEARCH "auditor %s: la_objsearch(): %s %s" 1064@ MSG_AUD_OBJSEARCH_R "auditor %s: la_objsearch(): %s: alternative path \ 1065 returned: %s" 1066@ MSG_AUD_OBJSEARCH_S "auditor %s: la_objsearch(): %s: alternative path \ 1067 returned: 0 (path skipped)" 1068@ MSG_AUD_OBJCLOSE "auditor %s: la_objclose(): %s" 1069@ MSG_AUD_SYMBIND "auditor %s: la_symbind(): %s: value: 0x%llx %s" 1070@ MSG_AUD_SYMBIND_R "auditor %s: la_symbind(): %s: returned value: \ 1071 0x%llx %s" 1072@ MSG_AUD_PLTENTER "auditor %s: la_pltenter(): %s: value: 0x%llx" 1073@ MSG_AUD_PLTENTER_R "auditor %s: la_pltenter(): %s: returned value: 0x%llx" 1074@ MSG_AUD_PLTEXIT "auditor %s: la_pltexit(): %s" 1075 1076@ MSG_AUD_IGNORE "file=%s; global auditing request ignored: object \ 1077 did not initiate process" 1078@ MSG_AUD_SKIP "file=%s; skipped: using auditor from %s" 1079@ MSG_AUD_TERM "file=%s; auditor has indicated path should be skipped" 1080 1081# GOT Messages 1082 1083@ MSG_GOT_INFO "Global Offset Table information: (%u entries)" 1084 1085# TRANSLATION_NOTE 1086# Do not translate .init or .fini, they represent reserved section names. 1087 1088@ MSG_UTL_INIT "calling .init (%s): %s" 1089@ MSG_UTL_FINI "calling .fini: %s" 1090@ MSG_UTL_ARRAY "calling %s[%d]:0x%llx: %s" 1091@ MSG_UTL_TRANS "transferring control: %s" 1092@ MSG_UTL_INTOOLATE "loading after relocation has started: interposition \ 1093 request (DF_1_INTERPOSE) ignored: %s" 1094 1095@ MSG_UTL_EDGE_TITLE_I "traversing %s dependency edge for interposer:" 1096@ MSG_UTL_EDGE_TITLE_S "traversing %s dependency edge:" 1097@ MSG_UTL_EDGE_START " node (%d): file=%s" 1098@ MSG_UTL_EDGE_IN " node (%d): file=%s: referenced by %s %s" 1099@ MSG_UTL_EDGE_OUT " node (%d): file=%s; cyclic dependency on %s" 1100@ MSG_UTL_COLLECT " [%d] %s; collecting %s section" 1101 1102@ MSG_UTL_SORT "from sorted order" 1103@ MSG_UTL_PEND "pending" 1104@ MSG_UTL_DYN "dynamically triggered" 1105@ MSG_UTL_DONE "done" 1106 1107@ MSG_UTL_DBNOTIFY "notify debugger: event: %s state: %s" 1108 1109@ MSG_UTL_SCC_TITLE " cycle detected - sorting cyclic dependencies in %s" 1110@ MSG_UTL_SCC_SUBI "reverse load-order" 1111@ MSG_UTL_SCC_SUBF "load-order" 1112 1113@ MSG_UTL_LCINTERFACE "file=%s; provides interface [%s]: 0x%llx" 1114 1115# Generic strings 1116 1117@ MSG_STR_IGNORE "ignored" 1118@ MSG_STR_ENTERED "entered" 1119@ MSG_STR_ORIGINAL "original" 1120@ MSG_STR_EXCLUDE "exclude" 1121@ MSG_STR_RESET "reset" 1122@ MSG_STR_IN " in" 1123@ MSG_STR_OUT "out" 1124@ MSG_STR_ACT "act" 1125@ MSG_STR_CURRENT "current" 1126@ MSG_STR_ADD "add" 1127@ MSG_STR_OLD "old" 1128@ MSG_STR_NEW "new" 1129@ MSG_STR_NEW_IMPLICIT "new (implicit)" 1130@ MSG_STR_RESOLVED "resolved" 1131@ MSG_STR_ADDING "adding" 1132@ MSG_STR_UP_1 "updating" 1133@ MSG_STR_UP_2 "updated" 1134@ MSG_STR_ALLOW "allow" 1135@ MSG_STR_REQUIRE "require" 1136@ MSG_STR_MOD_BEFORE "modify (before)" 1137@ MSG_STR_MOD_AFTER "modify (after)" 1138 1139@ MSG_STR_UNKNOWN "<unknown>" 1140@ MSG_STR_ORPHAN "<orphan>" 1141 1142@ MSG_STR_UNUSED "(unused)" 1143@ MSG_STR_AGAIN "(again)" 1144@ MSG_STR_NULL "(null)" 1145@ MSG_STR_ALTER " (alternate)" 1146@ MSG_STR_COPYZERO " (copy zero's unnecessary)" 1147@ MSG_STR_TEMPORARY " (temporary)" 1148@ MSG_STR_RETRY " (retry) " 1149 1150# TLS related messages 1151 1152@ MSG_TLS_STATBLOCK1 "static TLS module: [%ld] %s" 1153@ MSG_TLS_STATBLOCK2 "static TLS reservation: in use %#llx: \ 1154 additional backup: %#llx" 1155@ MSG_TLS_STATBLOCK3 "static TLS requirement: [%ld] %s: size %#llx: \ 1156 satisfied from backup reservation: remaining %#llx" 1157@ MSG_TLS_MODENT1 " block: %#18llx soff: %#10llx flags: %#llx \ 1158 %s" 1159@ MSG_TLS_MODENT2 " filesz: %#18llx memsz: %#10llx modid: %lld" 1160@ MSG_TLS_MODACT "%s TLS module: %s" 1161@ MSG_TLS_ADD "add" 1162@ MSG_TLS_REMOVE "remove" 1163 1164# Statistics related messages 1165 1166@ MSG_STATS_AR "archive %s: count=%d, used=%d (%d%%)" 1167 1168@ MSG_STATS_GENERAL "General Statistics:" 1169@ MSG_STATS_FILES " Input files: relocatables=%lld \ 1170 shared objects=%lld archives=%lld" 1171@ MSG_STATS_SYMBOLS_OUT " Symbols output: globals=%-10lld locals=%lld" 1172@ MSG_STATS_SYMBOLS_IN " Symbols input: globals=%-10lld scoped=%-10lld \ 1173 eliminated=%lld" 1174@ MSG_STATS_REL_OUT " Relocations output: records=%lld" 1175@ MSG_STATS_REL_IN " Relocations input: records=%-10lld applied=%lld" 1176@ MSG_STATS_REL_TICACHE " Relocation Cache" 1177@ MSG_STATS_REL_TIACT "Active" 1178@ MSG_STATS_REL_TIOUT "Output" 1179@ MSG_STATS_REL_CACHE " %s: buffers=%d, used=%lld/%lld (%d%%), \ 1180 size=%lld%s" 1181@ MSG_STATS_REL_ACACHE " Aux: buffers=%d, used=%lld/%lld (%d%%), \ 1182 size=%lld%s" 1183 1184# Capabilities messages 1185 1186@ MSG_CAP_SYS_HW_1 "hardware capabilities (CA_SUNW_HW_1) - %s" 1187@ MSG_CAP_SYS_SF_1 "software capabilities (CA_SUNW_SF_1) - %s" 1188@ MSG_CAP_SYS_MACH "machine capability (CA_SUNW_MACH) - %s" 1189@ MSG_CAP_SYS_PLAT "platform capability (CA_SUNW_PLAT) - %s" 1190@ MSG_CAP_SYS_HW_2 "hardware capabilities (CA_SUNW_HW_2) - %s" 1191@ MSG_CAP_SYS_HW_3 "hardware capabilities (CA_SUNW_HW_3) - %s" 1192 1193@ MSG_CAP_ALT_HW_1 "alternative hardware capabilities (CA_SUNW_HW_1) - %s" 1194@ MSG_CAP_ALT_SF_1 "alternative software capabilities (CA_SUNW_SF_1) - %s" 1195@ MSG_CAP_ALT_MACH "alternative machine capability (CA_SUNW_MACH) - %s" 1196@ MSG_CAP_ALT_PLAT "alternative platform capability (CA_SUNW_PLAT) - %s" 1197@ MSG_CAP_ALT_HW_2 "alternative hardware capabilities (CA_SUNW_HW_2) - %s" 1198@ MSG_CAP_ALT_HW_3 "alternative hardware capabilities (CA_SUNW_HW_3) - %s" 1199 1200@ MSG_CAP_SEC_TITLE "capabilities; input file=%s" 1201@ MSG_CAP_SEC_ENTRY "%12.12s %-15.15s %s" 1202 1203@ MSG_CAP_CANDIDATE "obj=%s; capabilities candidate" 1204@ MSG_CAP_POST_TITLE "capabilities post processing" 1205 1206@ MSG_CAP_FILTER_1 "dir=%s; capability directory filtered by %s" 1207@ MSG_CAP_FILTER_2 "dir=%s; no capability objects found" 1208 1209@ MSG_CAP_IDENTICAL "obj=%s and obj=%s: have identical capabilities: both \ 1210 objects ignored" 1211 1212@ MSG_ELF_HEADER "ELF Header" 1213 1214# Capabilities entries. 1215# TRANSLATION_NOTE - the following two entries provide for a series of one or 1216# more capabilities table entries that align with the initial title. 1217 1218@ MSG_CAP_ELF_TITLE " index tag value" 1219@ MSG_CAP_ELF_ENTRY "%10.10s %-15.15s %s" 1220 1221# Dynamic entries. 1222# TRANSLATION_NOTE - the following two entries provide for a series of one or 1223# more dynamic table entries that align with the initial title. 1224 1225@ MSG_DYN_TITLE " index tag value" 1226@ MSG_DYN_ENTRY "%10.10s %-16.16s %-#16llx %s" 1227 1228# Symbol table entries. 1229# TRANSLATION_NOTE - the following entries provide for a series of one or more 1230# standard 32-bit symbol table entries that align with the initial title. 1231 1232@ MSG_SYM_EFS_TITLE_32 " index value size type bind \ 1233 oth ver shndx name" 1234@ MSG_SYM_LDS_TITLE_32 " value size type bind \ 1235 oth ver shndx" 1236@ MSG_SYM_EFS_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ 1237 %-14.14s %s" 1238 1239# TRANSLATION_NOTE - the following entries provide for a series of one or more 1240# long 32-bit symbol table entries that align with the initial title. 1241 1242@ MSG_SYM_EFL_TITLE_32 " index value size type bind \ 1243 oth ver shndx / name" 1244@ MSG_SYM_LDL_TITLE_32 " value size type bind \ 1245 oth ver shndx" 1246@ MSG_SYM_EFL_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ 1247 %-14s %s" 1248 1249# TRANSLATION_NOTE - the following entries provide for a series of one or more 1250# standard 64-bit symbol table entries that align with the initial title. 1251 1252@ MSG_SYM_EFS_TITLE_64 " index value size \ 1253 type bind oth ver shndx name" 1254@ MSG_SYM_LDS_TITLE_64 " value size \ 1255 type bind oth ver shndx" 1256@ MSG_SYM_EFS_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ 1257 %-14.14s %s" 1258 1259# TRANSLATION_NOTE - the following entries provide for a series of one or more 1260# long 64-bit symbol table entries that align with the initial title. 1261 1262@ MSG_SYM_EFL_TITLE_64 " index value size \ 1263 type bind oth ver shndx / name" 1264@ MSG_SYM_LDL_TITLE_64 " value size \ 1265 type bind oth ver shndx" 1266@ MSG_SYM_EFL_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ 1267 %-14s %s" 1268 1269 1270# Syminfo entries. 1271# TRANSLATION_NOTE - the following two entries provide for a series of one or 1272# more symbol information table entries that align with the initial title. 1273 1274@ MSG_SYMINFO_TITLE " index flags \ 1275 bound to symbol" 1276@ MSG_SYMINFO_ENTRY "%10.10s %-8s %7s %-24s %s" 1277 1278@ MSG_SYMINFO_CAP "<symbol capabilities>" 1279@ MSG_SYMINFO_SELF "<self>" 1280@ MSG_SYMINFO_PARENT "<parent>" 1281@ MSG_SYMINFO_EXTERN "<extern>" 1282 1283 1284# Global offset table entries. 1285# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and 1286# provide for a series of one or more 32-bit got table entries that align with 1287# the initial title. 1288 1289@ MSG_GOT_TITLE_32 " index addr value \ 1290 pending relocation" 1291@ MSG_GOT_ENTRY_RE_32 "%10.10s 0x%08llx 0x%08llx %-24s %s" 1292@ MSG_GOT_ENTRY_NR_32 "%10.10s 0x%08llx 0x%08llx" 1293 1294# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and 1295# provide for a series of one or more 64-bit got table entries that align with 1296# the initial title. 1297 1298@ MSG_GOT_TITLE_64 " index addr \ 1299 value pending relocation" 1300@ MSG_GOT_ENTRY_RE_64 "%10.10s 0x%016llx 0x%016llx %-24s %s" 1301@ MSG_GOT_ENTRY_NR_64 "%10.10s 0x%016llx 0x%016llx" 1302 1303# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide 1304# for a series of one or more 32-bit got table entries that align with one of 1305# the initial titles. 1306 1307@ MSG_GOT_COLUMNS1_32 " index ref offset addend symbol" 1308@ MSG_GOT_COLUMNS2_32 " index ref offset value symbol" 1309@ MSG_GOT_FORMAT1_32 "%10.10s %3s 0x%08llx 0x%08llx %s" 1310@ MSG_GOT_FORMAT2_32 "%10.10s %3s 0x%08llx 0x%08llx %s:%s" 1311 1312# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide 1313# for a series of one or more 64-bit got table entries that align with one of 1314# the initial titles. 1315 1316@ MSG_GOT_COLUMNS1_64 " index ref offset \ 1317 addend symbol" 1318@ MSG_GOT_COLUMNS2_64 " index ref offset \ 1319 value symbol" 1320@ MSG_GOT_FORMAT1_64 "%10.10s %3s 0x%016llx 0x%016llx %s" 1321@ MSG_GOT_FORMAT2_64 "%10.10s %3s 0x%016llx 0x%016llx %s:%s" 1322 1323# Version table entries. 1324@ MSG_VER_DEF " index version dependency" 1325@ MSG_VER_NEED " file version" 1326@ MSG_VER_NEED_GNUVER " index file version" 1327 1328@ MSG_VER_LINE_1 "%10.10s %-26.26s %-20s %s" 1329@ MSG_VER_LLINE_1 "%10s %-26s %-20s %s" 1330@ MSG_VER_LINE_2 "%47s %s" 1331@ MSG_VER_LINE_3 "%38s %-20s %s" 1332@ MSG_VER_LINE_4 " %s" 1333@ MSG_VER_LINE_5 " %-26.26s %s" 1334@ MSG_VER_LLINE_5 " %-26s %s" 1335 1336 1337# Relocation entries. 1338# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1339# strings provide for a series of one or more 32-bit relocation table entries, 1340# using truncated section names, that align with one of the initial titles. 1341 1342@ MSG_REL_EFSA_TITLE_32 " type offset addend \ 1343 section symbol" 1344@ MSG_REL_EFSN_TITLE_32 " type offset \ 1345 section symbol" 1346@ MSG_REL_EFSA_ENTRY_32 " %-24s %#10llx %#10llx %-14.14s %s" 1347@ MSG_REL_EFSN_ENTRY_32 " %-24s %#10llx %-14.14s %s" 1348 1349# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1350# strings provide for a series of one or more 32-bit relocation table entries, 1351# using long section names, that align with one of the initial titles. 1352 1353@ MSG_REL_EFLA_TITLE_32 " type offset addend \ 1354 section / symbol" 1355@ MSG_REL_EFLN_TITLE_32 " type offset \ 1356 section / symbol" 1357@ MSG_REL_EFLA_ENTRY_32 " %-24s %#10llx %#10llx %-14s %s" 1358@ MSG_REL_EFLN_ENTRY_32 " %-24s %#10llx %-14s %s" 1359 1360 1361# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These 1362# strings provide for a series of one or more 32-bit relocation table entries, 1363# that align with the initial titles. 1364 1365@ MSG_REL_RTA_TITLE_32 " type offset \ 1366 addend symbol" 1367@ MSG_REL_RTN_TITLE_32 " type offset \ 1368 value symbol" 1369@ MSG_REL_RTV_TITLE_32 " value" 1370@ MSG_REL_RTA_ENTRY_32 " %5s %-24s %#10llx %#10llx %s %s" 1371@ MSG_REL_RTN_ENTRY_32 " %5s %-24s %#10llx %s %s" 1372@ MSG_REL_RT_APLVAL_32 " apply %#10llx %#10llx" 1373@ MSG_REL_RT_APLREG_32 " apply %10.10s %#10llx" 1374 1375 1376# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1377# provide for a series of one or more 32-bit relocation table entries, using 1378# truncated section names, that align with one of the initial titles. 1379 1380@ MSG_REL_LDSA_TITLE_32 " type \ 1381 offset addend section symbol" 1382@ MSG_REL_LDSN_TITLE_32 " type \ 1383 offset section symbol" 1384@ MSG_REL_LDSA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14.14s %s %s" 1385@ MSG_REL_LDSN_ENTRY_32 " %5s %-24s %#10llx %-14.14s %s %s" 1386 1387@ MSG_REL_LDSV_TITLE_32 " type \ 1388 offset value section symbol" 1389 1390# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1391# provide for a series of one or more 32-bit relocation table entries, using 1392# long section names, that align with one of the initial titles. 1393 1394@ MSG_REL_LDLA_TITLE_32 " type \ 1395 offset addend section / symbol" 1396@ MSG_REL_LDLN_TITLE_32 " type \ 1397 offset section / symbol" 1398@ MSG_REL_LDLA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14s %s %s" 1399@ MSG_REL_LDLN_ENTRY_32 " %5s %-24s %#10llx %-14s %s %s" 1400 1401@ MSG_REL_LDLV_TITLE_32 " type \ 1402 offset value section / symbol" 1403 1404# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1405# strings provide for a series of one or more 64-bit relocation table entries, 1406# using truncated section names, that align with one of the initial titles. 1407 1408@ MSG_REL_EFSA_TITLE_64 " type \ 1409 offset addend section symbol" 1410@ MSG_REL_EFSN_TITLE_64 " type \ 1411 offset section symbol" 1412@ MSG_REL_EFSA_ENTRY_64 " %-24s %#18llx %#18llx %-14.14s %s" 1413@ MSG_REL_EFSN_ENTRY_64 " %-24s %#18llx %-14.14s %s" 1414 1415# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1416# strings provide for a series of one or more 64-bit relocation table entries, 1417# using long section names, that align with one of the initial titles. 1418 1419@ MSG_REL_EFLA_TITLE_64 " type \ 1420 offset addend section / symbol" 1421@ MSG_REL_EFLN_TITLE_64 " type \ 1422 offset section / symbol" 1423@ MSG_REL_EFLA_ENTRY_64 " %-24s %#18llx %#18llx %-14s %s" 1424@ MSG_REL_EFLN_ENTRY_64 " %-24s %#18llx %-14s %s" 1425 1426 1427# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These 1428# strings provide for a series of one or more 64-bit relocation table entries, 1429# that align with the initial titles. 1430 1431@ MSG_REL_RTA_TITLE_64 " type \ 1432 offset addend symbol" 1433@ MSG_REL_RTN_TITLE_64 " type \ 1434 offset value symbol" 1435@ MSG_REL_RTV_TITLE_64 " value" 1436@ MSG_REL_RTA_ENTRY_64 " %5s %-24s %#18llx %#18llx %s %s" 1437@ MSG_REL_RTN_ENTRY_64 " %5s %-24s %#18llx %s %s" 1438@ MSG_REL_RT_APLVAL_64 " apply %#18llx %#18llx" 1439@ MSG_REL_RT_APLREG_64 " apply %18.18s %#18llx" 1440 1441# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1442# provide for a series of one or more 64-bit relocation table entries, using 1443# truncated section names, that align with one of the initial titles. 1444 1445@ MSG_REL_LDSA_TITLE_64 " type \ 1446 offset addend section symbol" 1447@ MSG_REL_LDSN_TITLE_64 " type \ 1448 offset section symbol" 1449@ MSG_REL_LDSA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14.14s %s %s" 1450@ MSG_REL_LDSN_ENTRY_64 " %5s %-24s %#18llx %-14.14s %s %s" 1451 1452@ MSG_REL_LDSV_TITLE_64 " type \ 1453 offset value section symbol" 1454 1455# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1456# provide for a series of one or more 64-bit relocation table entries, using 1457# long section names, that align with one of the initial titles. 1458 1459@ MSG_REL_LDLA_TITLE_64 " type \ 1460 offset addend section / symbol" 1461@ MSG_REL_LDLN_TITLE_64 " type \ 1462 offset section / symbol" 1463@ MSG_REL_LDLA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14s %s %s" 1464@ MSG_REL_LDLN_ENTRY_64 " %5s %-24s %#18llx %-14s %s %s" 1465 1466@ MSG_REL_LDLV_TITLE_64 " type \ 1467 offset value section / symbol" 1468 1469# dl*() family messages 1470 1471@ MSG_DL_IPHDR_ENTER "dl_iterate_phdr() called from file=%s" 1472@ MSG_DL_IPHDR_MAPCNG "dl_iterate_phdr() object map/unmap in callback" 1473@ MSG_DL_IPHDR_UNMAP "dl_iterate_phdr() early return due to object unmap" 1474@ MSG_DL_IPHDR_CALLBACK "dl_iterate_phdr() callback" 1475@ MSG_DL_IPHDR_NAME " dlpi_name: %s" 1476@ MSG_DL_IPHDR_MAPCNT " dlpi_adds: %-18llu dlpi_subs: %-18llu" 1477 1478@ MSG_DL_IPHDR_ADDR_32 " dlpi_addr: %#-10llx" 1479@ MSG_DL_IPHDR_PHDR_32 " dlpi_phdr: %#-10llx dlpi_phnum: %u" 1480 1481@ MSG_DL_IPHDR_ADDR_64 " dlpi_addr: %#-18llx" 1482@ MSG_DL_IPHDR_PHDR_64 " dlpi_phdr: %#-18llx dlpi_phnum: %u" 1483 1484@ MSG_DL_DLCLOSE "file=%s; dlclose() called from file=%s %s" 1485@ MSG_DL_DLDUMP "file=%s; dldump() called from file=%s: dumping to \ 1486 file=%s %s" 1487@ MSG_DL_DLOPEN "file=%s; dlopen() called from file=%s %s %s" 1488 1489@ MSG_DL_DLADDR "dladdr() called from file=%s: %#llx" 1490@ MSG_DL_DLERROR "dlerror() called from file=%s: %s" 1491@ MSG_DL_DLINFO "dlinfo() called from file=%s: handle=%s, request=%s, \ 1492 user data=%#llx" 1493 1494@ _END_ 1495 1496# Debug enabling tokens (for now these are untranslated) 1497 1498@ MSG_TOK_ALL "all" 1499@ MSG_TOK_ARGS "args" 1500@ MSG_TOK_BINDINGS "bindings" 1501@ MSG_TOK_DL "dl" 1502@ MSG_TOK_CAP "cap" 1503@ MSG_TOK_BASIC "basic" 1504@ MSG_TOK_ENTRY "entry" 1505@ MSG_TOK_FILES "files" 1506@ MSG_TOK_HELP "help" 1507@ MSG_TOK_INIT "init" 1508@ MSG_TOK_LIBS "libs" 1509@ MSG_TOK_MAP "map" 1510@ MSG_TOK_RELOC "reloc" 1511@ MSG_TOK_SECTIONS "sections" 1512@ MSG_TOK_SEGMENTS "segments" 1513@ MSG_TOK_SUPPORT "support" 1514@ MSG_TOK_SYMBOLS "symbols" 1515@ MSG_TOK_TLS "tls" 1516@ MSG_TOK_VERSIONS "versions" 1517@ MSG_TOK_AUDIT "audit" 1518@ MSG_TOK_GOT "got" 1519@ MSG_TOK_MOVE "move" 1520@ MSG_TOK_DEMANGLE "demangle" 1521@ MSG_TOK_STRTAB "strtab" 1522@ MSG_TOK_STATS "statistics" 1523@ MSG_TOK_UNUSED "unused" 1524 1525@ MSG_TOK_DETAIL "detail" 1526@ MSG_TOK_LONG "long" 1527@ MSG_TOK_NAME "name" 1528@ MSG_TOK_FULLNAME "fullname" 1529@ MSG_TOK_CLASS "class" 1530@ MSG_TOK_LMID "lmid" 1531@ MSG_TOK_TTIME "ttime" 1532@ MSG_TOK_DTIME "dtime" 1533 1534@ MSG_TOK_OUTFILE "output" 1535 1536@ MSG_TOK_LMID_ALL "ALL" 1537@ MSG_TOK_LMID_ALT "ALT" 1538@ MSG_TOK_LMID_BASE "BASE" 1539@ MSG_TOK_LMID_LDSO "LDSO" 1540 1541 1542# The following strings represent reserved words, files, pathnames and symbols. 1543# Reference to this strings is via the MSG_ORIG() macro, and thus no message 1544# translation is required. 1545 1546@ MSG_STR_EMPTY "" 1547@ MSG_STR_DELIMIT ",:" 1548@ MSG_STR_COMDAT "COMDAT " 1549 1550@ MSG_SCN_GOT ".got" 1551@ MSG_SCN_PLT ".plt" 1552@ MSG_SCN_BSS ".bss" 1553@ MSG_SCN_INIT ".init" 1554@ MSG_SCN_FINI ".fini" 1555@ MSG_SCN_INITARRAY ".initarray" 1556@ MSG_SCN_FINIARRAY ".finiarray" 1557@ MSG_SCN_PREINITARRAY ".preinitarray" 1558 1559@ MSG_SH_INFO "sh_info" 1560@ MSG_SH_LINK "sh_link" 1561 1562@ MSG_UTL_SCC_ENTRY " [%d] %s" 1563 1564@ MSG_FMT_INDEX " [%d]" 1565@ MSG_FMT_INDEX_RANGE " [%d-%d]" 1566@ MSG_FMT_STR "%s" 1567@ MSG_FMT_PATH "%s/%s" 1568 1569@ MSG_PTH_OBJECT "/tmp/ld.so-OBJECT-" 1570 1571@ MSG_SUNW_OST_SGS "SUNW_OST_SGS" 1572 1573# Entrance criteria messages 1574 1575@ MSG_ECR_NAME " ec_name: %s" 1576@ MSG_ECR_FLAGS " ec_flags: %s" 1577@ MSG_ECR_IS_NAME " ec_is_name: %-8s ec_attrmask: %s" 1578@ MSG_ECR_SEGMENT " ec_segment: %-8s ec_attrbits: %s" 1579@ MSG_ECR_NDX " ec_ordndx: %-8d ec_type: %s" 1580@ MSG_ECR_FILES " ec_files:" 1581@ MSG_ECR_FILE " %-21s %s" 1582 1583@ MSG_MAP_SORT_SEG " %s" 1584@ MSG_MAP_SORT_SEG_NAME " %-20s %s" 1585@ MSG_MAP_SORT_SEG_V " %-20s %-20s p_vaddr=0x%llx" 1586@ MSG_MAP_SORT_SEG_O " %-20s %-20s order=%d" 1587 1588# Libs messages 1589 1590@ MSG_LIB_FILE " %s" 1591 1592# PLT binding methods 1593 1594@ MSG_PLT_21D "21d" 1595@ MSG_PLT_24D "24d" 1596@ MSG_PLT_U32 "u32" 1597@ MSG_PLT_U44 "u44" 1598@ MSG_PLT_FULL "full" 1599@ MSG_PLT_FAR "far" 1600 1601# Segment messages 1602 1603@ MSG_SEG_DESC "segment[%d]" 1604@ MSG_SEG_NAME " sg_name: %s" 1605@ MSG_SEG_LENGTH " sg_length: %#llx" 1606@ MSG_SEG_ROUND " sg_round: %#llx" 1607@ MSG_SEG_ALIGN " sg_align: %#llx" 1608@ MSG_SEG_FLAGS " sg_flags: %s" 1609@ MSG_SEG_SIZESYM_TITLE " sg_sizesym:" 1610@ MSG_SEG_SIZESYM " %s" 1611@ MSG_SEG_IS_ORDER_TITLE " sg_is_order:" 1612@ MSG_SEG_OS_ORDER_TITLE " sg_os_order:" 1613@ MSG_SEG_LIST_ITEM " %s" 1614 1615# Section messages (used when expanding segment information) 1616 1617@ MSG_SEC_NAME " section[%d] os_name: %s" 1618 1619# Symbol strings 1620 1621@ MSG_SYM_GLOBAL "global" 1622@ MSG_SYM_LOCAL "local" 1623@ MSG_SYM_COPY "copy" 1624 1625@ MSG_DLSYM_NEXT "[ RTLD_NEXT ]" 1626@ MSG_DLSYM_DEFAULT "[ RTLD_DEFAULT ]" 1627@ MSG_DLSYM_SELF "[ RTLD_SELF ]" 1628@ MSG_DLSYM_PROBE "[ RTLD_PROBE ]" 1629@ MSG_DLSYM_SINGLETON "( singleton reference )" 1630 1631# Link-map mode strings 1632 1633@ MSG_MODE_GLOBNODEL "[ GLOBAL NODELETE ]" 1634@ MSG_MODE_GLOB "[ GLOBAL ]" 1635@ MSG_MODE_NODEL "[ NODELETE ]" 1636 1637# NOTE: these are used by lari(1), use care when changing. 1638@ MSG_BINFO_START " (" 1639@ MSG_BINFO_DIRECT "direct" 1640@ MSG_BINFO_INTERPOSE "interpose" 1641@ MSG_BINFO_COPYREF "copy-ref" 1642@ MSG_BINFO_FILTEE "filtee" 1643@ MSG_BINFO_PLTADDR "plt-addr" 1644@ MSG_BINFO_END ")" 1645@ MSG_BINFO_SEP "," 1646 1647# Utility messages 1648 1649@ MSG_UTL_EVNT_PREINIT "RD_PREINIT" 1650@ MSG_UTL_EVNT_POSTINIT "RD_POSTINIT" 1651@ MSG_UTL_EVNT_DLACT "RD_DLACTIVITY" 1652 1653@ MSG_UTL_STA_ADD "RT_ADD" 1654@ MSG_UTL_STA_DELETE "RT_DELETE" 1655@ MSG_UTL_STA_CONSIST "RT_CONSISTENT" 1656 1657# Version messages 1658 1659@ MSG_VER_SELECTED " SELECTED %-26.26s %s" 1660@ MSG_VER_L_SELECTED " SELECTED %-26s %s" 1661@ MSG_VER_ALL " ALL %-26.26s" 1662@ MSG_VER_L_ALL " ALL %-26s" 1663 1664# Global offset table entries. 1665 1666@ MSG_GOT_INDEX " [%d]" 1667@ MSG_GOT_SMALL_PIC "pic" 1668@ MSG_GOT_BIG_PIC "PIC" 1669 1670@ MSG_CNTL_ENTRY " [0x%llx] %s" 1671 1672@ MSG_STR_NL "\n" 1673@ MSG_STR_LDVER "Solaris Linkers: %s" 1674 1675@ MSG_FMT_INDEX " [%d]" 1676@ MSG_FMT_ISEC_NAME "[%u]%s" 1677@ MSG_FMT_MEMUNIT " (%lld%c)" 1678 1679@ MSG_SUNW_OST_SGS "SUNW_OST_SGS" 1680 1681@ MSG_ELF_MAGIC " ei_magic: { 0x%x, %c, %c, %c }" 1682@ MSG_ELF_CLASS " ei_class: %-18s ei_data: %s" 1683@ MSG_ELF_OSABI " ei_osabi: %-18s ei_abiversion: %s" 1684@ MSG_ELF_MACHINE " e_machine: %-18s e_version: %s" 1685@ MSG_ELF_TYPE " e_type: %s" 1686@ MSG_ELF_FLAGS " e_flags: %18s" 1687@ MSG_ELF_FLAGS_FMT " e_flags: %s" 1688@ MSG_ELF_ESIZE " e_entry: %#18llx e_ehsize: %2d \ 1689 e_shstrndx: %d" 1690@ MSG_ELFX_ESIZE " e_entry: %#18llx e_ehsize: %2d \ 1691 e_shstrndx: SHN_XINDEX (see shdr[0].sh_link)" 1692@ MSG_ELF_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ 1693 e_shnum: %d" 1694@ MSG_ELFX_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ 1695 e_shnum: 0 (see shdr[0].sh_size)" 1696@ MSG_ELF_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ 1697 e_phnum: %d" 1698@ MSG_ELFX_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ 1699 e_phnum: PN_XNUM (see shdr[0].sh_info)" 1700 1701# Shdr[0] messages 1702 1703@ MSG_SHD0_TITLE "Section Header[0]: (ELF Ehdr extensions)" 1704@ MSG_SHD0_ADDR " sh_addr: %-6lld sh_flags: %s" 1705@ MSG_SHD0_SIZE " sh_size: %-6lld (e_shnum) sh_type: %s" 1706@ MSG_SHD0_OFFSET " sh_offset: %-6lld \ 1707 sh_entsize: %lld" 1708@ MSG_SHD0_LINK " sh_link: %-6d (e_shstrndx) sh_info: \ 1709 %d (e_phnum)" 1710@ MSG_SHD0_ALIGN " sh_addralign: %-6lld" 1711 1712# Section header messages 1713 1714@ MSG_SHD_ADDR_32 " sh_addr: %#-10llx sh_flags: %s" 1715@ MSG_SHD_SIZE_32 " sh_size: %#-10llx sh_type: %s" 1716@ MSG_SHD_OFFSET_32 " sh_offset: %#-10llx sh_entsize: %#llx" 1717@ MSG_SHD_OFFSET_ENT_32 " sh_offset: %#-10llx sh_entsize: %#llx \ 1718 (%lld %s)" 1719@ MSG_SHD_LINK_32 " sh_link: %-14s sh_info: %s" 1720@ MSG_SHD_ALIGN_32 " sh_addralign: %#-10llx" 1721 1722@ MSG_SHD_ADDR_64 " sh_addr: %#-18llx sh_flags: %s" 1723@ MSG_SHD_SIZE_64 " sh_size: %#-18llx sh_type: %s" 1724@ MSG_SHD_OFFSET_64 " sh_offset: %#-18llx sh_entsize: %#llx" 1725@ MSG_SHD_OFFSET_ENT_64 " sh_offset: %#-18llx sh_entsize: %#llx \ 1726 (%lld %s)" 1727@ MSG_SHD_LINK_64 " sh_link: %-18s sh_info: %s" 1728@ MSG_SHD_ALIGN_64 " sh_addralign: %#-18llx" 1729 1730# Program header messages 1731 1732@ MSG_PHD_VADDR_32 " p_vaddr: %#-10llx p_flags: %s" 1733@ MSG_PHD_PADDR_32 " p_paddr: %#-10llx p_type: %s" 1734@ MSG_PHD_FILESZ_32 " p_filesz: %#-10llx p_memsz: %#llx" 1735@ MSG_PHD_OFFSET_32 " p_offset: %#-10llx p_align: %#llx" 1736 1737@ MSG_PHD_VADDR_64 " p_vaddr: %#-18llx p_flags: %s" 1738@ MSG_PHD_PADDR_64 " p_paddr: %#-18llx p_type: %s" 1739@ MSG_PHD_FILESZ_64 " p_filesz: %#-18llx p_memsz: %#llx" 1740@ MSG_PHD_OFFSET_64 " p_offset: %#-18llx p_align: %#llx" 1741 1742# Syminfo formats 1743 1744@ MSG_SYMINFO_UNKFLAG "[0x%x]" 1745 1746# Lc_interface interface tags. 1747 1748@ MSG_CI_NULL "NULL" 1749@ MSG_CI_VERSION "VERSION" 1750@ MSG_CI_ATEXIT "ATEXIT" 1751@ MSG_CI_LCMESSAGES "LCMESSAGES" 1752@ MSG_CI_BIND_GUARD "BIND_GUARD" 1753@ MSG_CI_BIND_CLEAR "BIND_CLEAR" 1754@ MSG_CI_THR_SELF "THR_SELF" 1755@ MSG_CI_TLS_MODADD "TLS_MODADD" 1756@ MSG_CI_TLS_MODREM "TLS_MODREM" 1757@ MSG_CI_TLS_STATMOD "TLS_STATMOD" 1758@ MSG_CI_THRINIT "THRINIT" 1759@ MSG_CI_CRITICAL "CRITICAL" 1760 1761# TLS information flags 1762 1763@ MSG_TLS_FLAG_STATIC "STATIC-TLS" 1764 1765# mmapobj() mr_flags. 1766 1767@ MSG_MR_PADDING "[ PADDING ]" 1768@ MSG_MR_HDR_ELF "[ HDR_ELF ]" 1769 1770# audit originator 1771 1772@ MSG_AUD_PRELOAD "[ LD_AUDIT ]" 1773@ MSG_AUD_GLOBAL "[ GLOBAL AUDIT ]" 1774