xref: /illumos-gate/usr/src/cmd/sgs/liblddbg/common/liblddbg.msg (revision d0f40dc6a997c84bacf5f9ba83d57a95495c399b)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21
22#
23# Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26
27@ _START_
28
29# Message file for cmd/sgs/liblddbg.
30
31@ MSG_ID_LIBLDDBG
32
33
34# Usage messages
35
36@ MSG_USE_UNRECOG	"warning: unrecognized debug option (try help): %s"
37@ MSG_USE_CNTNEGOPT	"warning: ignoring non-negatable debug option: %s"
38
39@ MSG_USE_HDR_DCT	"Display Control Tokens:"
40@ MSG_USE_HDR_CST	"Category Selection Tokens:"
41@ MSG_USE_HDR_BOTH	"    [ld and ld.so.1]"
42@ MSG_USE_HDR_RTLD	"    [ld.so.1 only]"
43@ MSG_USE_HDR_LD	"    [ld only]"
44
45# TRANSLATION_NOTE - Use the following output in the C locale as reference 1.
46#
47# The runtime linker and link-editor support a shared debugging
48# facility. Options are selected via a comma separated list of tokens,
49# each of which specifies a display option or a category for which
50# information is desired. Many tokens apply to both linker components,
51# while some are specific to one or the other. Diagnostics are printed,
52# one per line, with a standard prefix prepended to each one. Diagnostic
53# output is sent to stderr unless otherwise redirected.
54
55# TRANSLATION_NOTE - The next series of messages makes the above output in C
56# locale.
57
58@ MSG_USE_R1_A	"The runtime linker and link-editor support a \
59		 shared debugging"
60@ MSG_USE_R1_B	"facility. Options are selected via a comma separated list \
61		 of tokens,"
62@ MSG_USE_R1_C	"each of which specifies a display option or a category \
63		 for which"
64@ MSG_USE_R1_D	"information is desired. Many tokens apply to both linker \
65		 components,"
66@ MSG_USE_R1_E	"while some are specific to one or the other. Diagnostics \
67		 are printed,"
68@ MSG_USE_R1_F	"one per line, with a standard prefix prepended to each one. \
69		 Diagnostic"
70
71# TRANSLATION_NOTE -- do not translate "stderr"
72@ MSG_USE_R1_G	"output is sent to stderr unless otherwise redirected."
73
74# TRANSLATION_NOTE - End of reference 1
75
76
77# TRANSLATION_NOTE - Use the following output in the C locale as reference 2.
78#
79# Runtime Linking (ld.so.1):
80#     Diagnostics that trace the runtime linking of an application
81#     can be enabled via the LD_DEBUG environment variable:
82#          LD_DEBUG=token1,token2 app ...
83#     In addition to the "output" token described below, diagnostic
84#     output from the runtime linker can be redirected to an output
85#     file using the additional environment variable:
86#          LD_DEBUG_OUTPUT=file
87#     If the "output" token and LD_DEBUG_OUTPUT are both specified,
88#     the file specified by LD_DEBUG_OUTPUT is used. If LD_DEBUG_OUTPUT
89#     is used, the output file name is suffixed with the process id.
90#     An output file specified via the "output" token is used as
91#     specified, without a process id suffix. Use of the "output"
92#     token with programs that call fork() results in each process
93#     writing debug output to the same file. The debug output will be
94#     jumbled and incomplete. LD_DEBUG_OUTPUT should be used in such
95#     cases to direct debug output for each process to a unique file.
96#
97#     All runtime linker diagnostics are prepended with the process
98#     id. If thread capabilities are enabled for the process, the
99#     thread id is also shown. All Solaris applications are thread
100#     capable, and a single threaded application may use threads via
101#     the libraries it links to. Diagnostics from such applications
102#     reference thread id 1.
103
104# TRANSLATION_NOTE - The next series of messages makes the above output in C
105# locale.
106
107@ MSG_USE_R2_A	"Runtime Linking (ld.so.1):"
108@ MSG_USE_R2_B	"    Diagnostics that trace the runtime linking \
109		 of an application"
110
111# TRANSLATION_NOTE -- do not translate "LD_DEBUG"
112@ MSG_USE_R2_C	"    can be enabled via the LD_DEBUG environment variable:"
113
114# TRANSLATION_NOTE -- do not translate "LD_DEBUG"
115@ MSG_USE_R2_D	"         LD_DEBUG=token1,token2 app ..."
116
117# TRANSLATION_NOTE -- do not translate "output"
118@ MSG_USE_R2_E	"    In addition to the \"output\" token described \
119		 below, diagnostic"
120@ MSG_USE_R2_F	"    output from the runtime linker can be redirected to \
121		 an output"
122@ MSG_USE_R2_G	"    file using the additional environment variable:"
123
124# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT"
125@ MSG_USE_R2_H	"         LD_DEBUG_OUTPUT=file"
126
127# TRANSLATION_NOTE -- do not translate "output" or "LD_DEBUG_OUTPUT"
128@ MSG_USE_R2_I	"    If the \"output\" token and LD_DEBUG_OUTPUT are \
129		 both specified,"
130
131# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT"
132@ MSG_USE_R2_J	"    the file specified by LD_DEBUG_OUTPUT is used. \
133		 If LD_DEBUG_OUTPUT"
134@ MSG_USE_R2_K	"    is used, the output file name is suffixed with \
135		     the process id."
136
137# TRANSLATION_NOTE -- do not translate "output"
138@ MSG_USE_R2_L	"    An output file specified via the \"output\" token \
139		     is used as"
140
141# TRANSLATION_NOTE -- do not translate "output"
142@ MSG_USE_R2_M	"    specified, without a process id suffix. Use \
143		     of the \"output\""
144
145# TRANSLATION_NOTE -- do not translate "fork"
146@ MSG_USE_R2_N	"    token with programs that call fork() results in \
147		     each process"
148@ MSG_USE_R2_O	"    writing debug output to the same file. The debug \
149		     output will be"
150@ MSG_USE_R2_P	"    jumbled and incomplete. LD_DEBUG_OUTPUT should be \
151		     used in such"
152@ MSG_USE_R2_Q	"    cases to direct debug output for each process to \
153		     a unique file."
154
155
156@ MSG_USE_R2_R	"    All runtime linker diagnostics are prepended with \
157		 the process"
158@ MSG_USE_R2_S	"    id. If thread capabilities are enabled for the \
159		 process, the"
160@ MSG_USE_R2_T	"    thread id is also shown. All Solaris applications are \
161		 thread"
162@ MSG_USE_R2_U	"    capable, and a single threaded application may \
163		 use threads via"
164@ MSG_USE_R2_V	"    the libraries it links to. Diagnostics from such \
165		 applications"
166@ MSG_USE_R2_W	"    reference thread id 1."
167
168# TRANSLATION_NOTE - End of reference 2
169
170
171# TRANSLATION_NOTE - Use the following output in the C locale as reference 3.
172#
173# Link-Editing (ld):
174#     Diagnostics that trace the link-editing of an application are
175#     enabled using the -D option:
176#        ld -Dtoken1,token2 -o prog ...
177#     As compiler drivers may assign -D a different meaning, the
178#     LD_OPTIONS environment variable is often used:
179#        LD_OPTIONS=-Dtoken1,token2 cc -o prog ...
180#
181#     The position of -D on the link-edit command line is significant.
182#     Diagnostics are enabled when a debug token is first encountered,
183#     and can be switched off by prepending the token with "!".
184#
185#     Diagnostic output can be directed to a file using the "output"
186#     token, The output file is used as specified, without a process
187#     id suffix.
188#
189#     All link-editor diagnostics are prepended with the string "debug".
190#
191
192# TRANSLATION_NOTE - The next series of messages makes the above output in C
193# locale.
194
195@ MSG_USE_R3_A	" Link-Editing (ld):"
196@ MSG_USE_R3_B	"    Diagnostics that trace the link-editing of an \
197		 application are"
198@ MSG_USE_R3_C	"    enabled using the -D option:"
199@ MSG_USE_R3_D	"       ld -Dtoken1,token2 -o prog ..."
200@ MSG_USE_R3_E	"    As compiler drivers may assign -D a different meaning, the"
201
202# TRANSLATION_NOTE -- do not translate "LD_OPTIONS"
203@ MSG_USE_R3_F	"    LD_OPTIONS environment variable is often used:"
204
205# TRANSLATION_NOTE -- do not translate "LD_OPTIONS"
206@ MSG_USE_R3_G	"       LD_OPTIONS=-Dtoken1,token2 cc -o prog ..."
207
208@ MSG_USE_R3_H	"    The position of -D on the link-edit command line \
209		 is significant."
210@ MSG_USE_R3_I	"    Diagnostics are enabled when a debug token is \
211		 first encountered,"
212@ MSG_USE_R3_J	"    and can be switched off by prepending the token \
213		 with \"!\"."
214
215# TRANSLATION_NOTE -- do not translate "output"
216@ MSG_USE_R3_K	"    Diagnostic output can be directed to a file using \
217		 the \"output\""
218
219@ MSG_USE_R3_L	"    token, The output file is used as specified, \
220		 without a process"
221@ MSG_USE_R3_M	"    id suffix."
222
223
224# TRANSLATION_NOTE -- do not translate "debug"
225@ MSG_USE_R3_N	"    All link-editor diagnostics are prepended with the \
226		 string \"debug\"."
227
228# TRANSLATION_NOTE - End of reference 3
229
230
231# TRANSLATION_NOTE - Use the following output in the C locale as reference 4.
232#
233#         demangle         show C++ symbol names in their demangled form
234#         detail           provide more information in conjunction with
235#                            other options
236#         dtime            prepend a time delta to diagnostics. The value
237#                            appears as seconds.fraction, and represents
238#                            the elapsed time since that last diagnostic.
239#         long             display long object names without truncation
240#         output=file      debug output is sent to the named file
241#                            instead of stderr. If file is empty (\"\"),
242#                            following output will be sent to stderr.
243#         ttime            prepend a time stamp to diagnostics. The value
244#                            appears as seconds.fraction, and represents
245#                            the time since entering ld or ld.so.1.
246#                            Note, all diagnostics induce a probe affect,
247#                            which should be taken into account when
248#                            interpreting dtime and ttime information.
249#
250
251# TRANSLATION_NOTE - The next series of messages makes the above output in C
252# locale.
253
254# TRANSLATION_NOTE -- do not translate the first token "demangle".
255@ MSG_USE_R4_A	"        demangle         show C++ symbol names in their \
256					  demangled form"
257
258# TRANSLATION_NOTE -- do not translate the first token "detail".
259@ MSG_USE_R4_B	"        detail           provide more information in \
260					  conjunction with"
261@ MSG_USE_R4_B2	"                           other options"
262
263# TRANSLATION_NOTE -- do not translate the first token "dtime".
264@ MSG_USE_R4_C	"        dtime            prepend a time delta to diagnostics. \
265					  The value"
266@ MSG_USE_R4_C2	"                           appears as seconds.fraction, and \
267					  represents"
268@ MSG_USE_R4_C3	"                           the elapsed time since that last \
269					  diagnostic."
270
271# TRANSLATION_NOTE -- do not translate the first token "long".
272@ MSG_USE_R4_D	"        long             display long object names without \
273					  truncation"
274
275# TRANSLATION_NOTE -- do not translate the first token "output".
276@ MSG_USE_R4_E	"        output=file      debug output is sent to the \
277					  named file"
278@ MSG_USE_R4_E2	"                           instead of stderr. If file is \
279					  empty (\"\"),"
280@ MSG_USE_R4_E3	"                           following output will be \
281					    sent to stderr."
282
283# TRANSLATION_NOTE -- do not translate the first token "ttime".
284@ MSG_USE_R4_F	"        ttime            prepend a time stamp to diagnostics. \
285					  The value"
286@ MSG_USE_R4_F2	"                           appears as seconds.fraction, and \
287					  represents"
288@ MSG_USE_R4_F3	"                           the time since entering ld or \
289					  ld.so.1."
290@ MSG_USE_R4_F4 "                           Note all diagnostics induce a \
291					  probe affect,"
292@ MSG_USE_R4_F5 "                           which should be taken into \
293					  account when"
294@ MSG_USE_R4_F6 "                           interpreting dtime and ttime \
295                                          information."
296
297# TRANSLATION_NOTE - End of reference 4
298
299
300# TRANSLATION_NOTE - Use the following output in the C locale as reference 5.
301#
302#         lmid[=name]      prepend link-map list id to diagnostics, and
303#                          optionally filter the lists: By default,
304#                          diagnostics are produced for all link-map
305#                          lists except that of the runtime linker
306#                          (ldso), without identification. "lmid" causes
307#                          the link-map list id to be prepended.
308#                          "name" limits diagnostics to the named
309#                          link-map list. Additional "lmid" tokens
310#                          can specify multiple link-map lists.
311#                          Valid names are:
312#                              all        all link-map lists except ldso
313#                              alt        all alternative link-map lists
314#                              alt[0-9]+  specific alternative link-map list
315#                              base       the base, or main, link-map list
316#                              ldso       the runtime linker link-map list
317#
318
319# TRANSLATION_NOTE - The next series of messages makes the above output in C
320# locale.
321
322
323# TRANSLATION_NOTE -- do not translate the first token "lmid".
324@ MSG_USE_R5_A	"        lmid[=name]      prepend link-map list id to \
325					  diagnostics, and"
326@ MSG_USE_R5_A2	"                         optionally filter the lists: By \
327					  default,"
328@ MSG_USE_R5_A3	"                         diagnostics are produced for all \
329					  link-map"
330@ MSG_USE_R5_A4	"                         lists except that of the runtime \
331					  linker"
332@ MSG_USE_R5_A5	"                         (ldso), without identification. \
333					  \"lmid\" causes"
334
335# TRANSLATION_NOTE -- do not translate "name"
336@ MSG_USE_R5_A6	"                         the link-map list id to be prepended."
337@ MSG_USE_R5_A7	"                         \"name\" limits diagnostics to the \
338					  named"
339@ MSG_USE_R5_A8	"                         link-map list. Additional \"lmid\" \
340					  tokens"
341@ MSG_USE_R5_A9	"                         can specify multiple link-map \
342					  lists."
343@ MSG_USE_R5_A0	"                         Valid names are:"
344
345# TRANSLATION_NOTE -- do not translate the token "all".
346@ MSG_USE_R5_B	"                             all        all link-map lists \
347							 except ldso"
348
349# TRANSLATION_NOTE -- do not translate the token "alt".
350@ MSG_USE_R5_C	"                             alt        all alternative \
351							 link-map lists"
352
353# TRANSLATION_NOTE -- do not translate the token "alt".
354@ MSG_USE_R5_D	"                             alt[0-9]+  specific alt \
355							 link-map list"
356
357# TRANSLATION_NOTE -- do not translate the token "base".
358@ MSG_USE_R5_E	"                             base       base (main) \
359							 link-map list"
360@ MSG_USE_R5_F	"                             ldso       runtime linker \
361							 link-map list "
362# TRANSLATION_NOTE - End of reference 5
363
364
365# TRANSLATION_NOTE - Use the following output in the C locale as reference 6.
366#
367#         name             prepend output file basename to diagnostics
368#         fullname         prepend full output file name to diagnostics
369#         class            prepend output file elfclass (32/64) to
370#                            diagnostics
371#
372
373# TRANSLATION_NOTE - The next series of messages makes the above output in C
374# locale.
375
376# TRANSLATION_NOTE -- do not translate the first token "name".
377@ MSG_USE_R6_A	"        name             prepend output file basename \
378					  to diagnostics"
379
380# TRANSLATION_NOTE -- do not translate the first token "fullname".
381@ MSG_USE_R6_B	"        fullname         prepend full output file name \
382					  to diagnostics"
383
384# TRANSLATION_NOTE -- do not translate the first token "class".
385@ MSG_USE_R6_C	"        class            prepend output file elfclass \
386					  (32/64) to"
387@ MSG_USE_R6_C2	"                           diagnostics"
388
389# TRANSLATION_NOTE - End of reference 6
390
391
392# TRANSLATION_NOTE - Use the following output in the C locale as reference 7.
393#
394#         all              display information for all categories
395#         basic            basic trace information/warnings
396#         cap              platform/machine/hardware/software capabilities
397#         files            input file processing (files and libraries)
398#         help             this help message
399#         libs             library search paths; detail flag shows
400#                            actual library lookup (-l) processing
401#         move             move sections
402#         reloc            relocations
403#         symbols          symbol tables; detail flag shows internal
404#                            symbol table addition and resolution (ld only)
405#         tls              thread local storage (TLS)
406#         unused           unused/unreferenced files; detail flag
407#                            shows unused sections (ld only)
408#         versions         ELF versioning
409
410# TRANSLATION_NOTE - The next series of messages makes the above output in C
411# locale.
412
413
414# TRANSLATION_NOTE -- do not translate the first token "all".
415@ MSG_USE_R7_A	"        all              display information for \
416					  all categories"
417
418# TRANSLATION_NOTE -- do not translate the first token "basic".
419@ MSG_USE_R7_B	"        basic            basic trace information/warnings"
420
421# TRANSLATION_NOTE -- do not translate the first token "cap".
422@ MSG_USE_R7_C	"        cap              platform/machine/hardware/software \
423					  capabilities"
424
425# TRANSLATION_NOTE -- do not translate the first token "files".
426@ MSG_USE_R7_D	"        files            input file processing (files \
427					  and libraries)"
428
429# TRANSLATION_NOTE -- do not translate the first token "help".
430@ MSG_USE_R7_E	"        help             this help message"
431
432# TRANSLATION_NOTE -- do not translate the first token "libs".
433@ MSG_USE_R7_F	"        libs             library search paths; detail \
434					  flag shows"
435@ MSG_USE_R7_F2	"                           actual library lookup (-l) \
436					    processing"
437
438# TRANSLATION_NOTE -- do not translate the first token "move".
439@ MSG_USE_R7_G	"        move             move sections"
440
441# TRANSLATION_NOTE -- do not translate the first token "reloc".
442@ MSG_USE_R7_H	"        reloc            relocations"
443
444# TRANSLATION_NOTE -- do not translate the first token "symbols".
445@ MSG_USE_R7_I	"        symbols          symbol tables; detail flag shows \
446					  internal"
447@ MSG_USE_R7_I2	"                           symbol table addition/resolution \
448					    (ld only)"
449
450# TRANSLATION_NOTE -- do not translate the first token "tls".
451@ MSG_USE_R7_J	"        tls              thread local storage (TLS)"
452
453# TRANSLATION_NOTE -- do not translate the first token "unused".
454@ MSG_USE_R7_K	"        unused           unused/unreferenced files; \
455					  detail flag"
456@ MSG_USE_R7_K2	"                           shows unused sections (ld only)"
457
458# TRANSLATION_NOTE -- do not translate the first token "versions".
459@ MSG_USE_R7_L	"        versions         ELF versioning"
460
461# TRANSLATION_NOTE - End of reference 7
462
463
464# TRANSLATION_NOTE - Use the following output in the C locale as reference 8.
465#
466#         audit            runtime link-audit processing
467#         bindings         symbol binding; detail flag shows
468#                            absolute:relative addresses
469#         callback         user supplied code executed by ld.so.1
470#                            (i.e. dl_iterate_phdr)
471#         init             init and fini processing
472
473
474# TRANSLATION_NOTE - The next series of messages makes the above output in C
475# locale.
476
477
478# TRANSLATION_NOTE -- do not translate the first token "audit".
479@ MSG_USE_R8_A	"        audit            runtime link-audit processing"
480
481# TRANSLATION_NOTE -- do not translate the first token "bindings".
482@ MSG_USE_R8_B	"        bindings         symbol binding; detail flag shows"
483@ MSG_USE_R8_B2	"                           absolute:relative addresses"
484
485# TRANSLATION_NOTE -- do not translate the first token "dl".
486@ MSG_USE_R8_C	"        dl               user calls to the dl*() family"
487
488# TRANSLATION_NOTE -- do not translate the first token "init".
489@ MSG_USE_R8_D	"        init             init and fini processing"
490
491# TRANSLATION_NOTE - End of reference 8
492
493
494# TRANSLATION_NOTE - Use the following output in the C locale as reference 9.
495#
496#         args             input arguments
497#         entry            entrance criteria descriptors
498#         got              GOT symbol information
499#         map              mapfile processing
500#         sections         input sections
501#         segments         output segments and address/offset processing;
502#                            detail flag shows associated sections
503#         statistics       symbol table and relocation statistics
504#         strtab           string table compression statistics;
505#                            detail flag shows layout of string tables
506#         support          support libraries
507
508# TRANSLATION_NOTE - The next series of messages makes the above output in C
509# locale.
510
511# TRANSLATION_NOTE -- do not translate the first token "args".
512@ MSG_USE_R9_A	"        args             input arguments"
513
514# TRANSLATION_NOTE -- do not translate the first token "entry".
515@ MSG_USE_R9_B	"        entry            entrance criteria descriptors"
516
517# TRANSLATION_NOTE -- do not translate the first token "got".
518@ MSG_USE_R9_C	"        got              GOT symbol information"
519
520# TRANSLATION_NOTE -- do not translate the first token "map".
521@ MSG_USE_R9_D	"        map              mapfile processing"
522
523# TRANSLATION_NOTE -- do not translate the first token "sections".
524@ MSG_USE_R9_E	"        sections         input sections"
525
526# TRANSLATION_NOTE -- do not translate the first token "segments".
527@ MSG_USE_R9_F	"        segments         output segments and address/offset \
528					  processing;"
529@ MSG_USE_R9_F2	"                           detail flag shows associated \
530					    sections"
531
532# TRANSLATION_NOTE -- do not translate the first token "statistics".
533@ MSG_USE_R9_G	"        statistics       symbol table and relocation \
534					  statistics"
535
536# TRANSLATION_NOTE -- do not translate the first token "strtab".
537@ MSG_USE_R9_H	"        strtab           string table compression statistics;"
538@ MSG_USE_R9_H2	"                           detail flag shows layout of \
539					    string tables"
540
541# TRANSLATION_NOTE -- do not translate the first token "support".
542@ MSG_USE_R9_I	"        support          support libraries"
543
544# TRANSLATION_NOTE - End of reference 9
545
546
547# Basic processing (ld).
548
549@ MSG_BASIC_COLLECT	"collect relocations"
550@ MSG_BASIC_CREATE	"create output image"
551@ MSG_BASIC_FILES	"process files"
552@ MSG_BASIC_FINISHED	"processing finished"
553@ MSG_BASIC_OPTIONS	"process options"
554@ MSG_BASIC_RELOCATE	"relocate output image"
555@ MSG_BASIC_VALIDATE	"validating symbols"
556
557# Argument messages
558
559@ MSG_ARG_OPTION	"arg[%d]\toption=-%c"
560@ MSG_ARG_OPTARG	"arg[%d]\toption=-%c:  option-argument: %s"
561@ MSG_ARG_STR2CHR	"arg[%d]\toption=-%s:  translated: new option=-%c"
562@ MSG_ARG_WLDEL		"arg[%d]\toption=-W%s:  translated: prefix -Wl,: \
563			 removed"
564@ MSG_ARG_FILE		"arg[%d]\tfile=%s"
565
566
567# Bindings messages
568# NOTE: these are used by appcert(1) and lari(1), use care when changing.
569
570@ MSG_BND_BASIC		"binding file=%s to file=%s: symbol '%s'"
571@ MSG_BND_PLT		"binding file=%s (%#llx:%#llx) at plt[%lld]:%s to \
572			 file=%s (%#llx:%#llx): symbol '%s'%s"
573@ MSG_BND_DLSYM		"binding file=%s (dlsym) to file=%s \
574			 (%#llx:%#llx): symbol '%s'%s"
575@ MSG_BND_DEFAULT	"binding file=%s (%#llx:%#llx) to file=%s \
576			 (%#llx:%#llx): symbol '%s'%s"
577@ MSG_BND_WEAK_1	"binding file=%s to 0x0 (undefined weak): symbol '%s'"
578@ MSG_BND_WEAK_2	"binding file=%s (%#llx:%#llx) to 0x0 \
579			 (undefined weak): symbol '%s'"
580
581# NOTE: the rejected message is used by lari(1), use care when changing.  This
582# message is formatted to conform to the pattern used by the MSG_BINFO messages.
583@ MSG_BND_REJECT	"binding file=%s to file=%s: symbol '%s'  \
584			 (rejected: %s)"
585@ MSG_BNDREJ_DIRECT	"attempt to directly bind to a NODIRECT definition"
586@ MSG_BNDREJ_GROUP	"attempt to bind within a group to a NODIRECT \
587			 definition"
588@ MSG_BNDREJ_SINGLE	"attempt to bind to a SINGLETON definition without \
589			 following default search model"
590
591@ MSG_BND_PLTPAD_TO	"   pltpad: %#llx: file=%s bound to file=%s: \
592			 symbol '%s'"
593@ MSG_BND_PLTPAD_FROM	"   pltpad: %#llx: bound from file=%s: symbol '%s'"
594
595@ MSG_BND_PSUM_SPARCV9	"Summary of PLT types bound: 21d=%d, 24d=%d, u32=%d, \
596			 u44=%d, full=%d, far=%d, Total=%d"
597@ MSG_BND_PSUM_SPARC	"Summary of PLT types bound: 21d=%d, 24d=%d, \
598			 full=%d, Total=%d"
599@ MSG_BND_PSUM_DEFAULT	"Summary of PLT types bound: total=%d"
600
601# Relocation messages
602
603@ MSG_REL_GENERATE	"generating input relocations: section=%s"
604@ MSG_REL_COLLECT	"collecting input relocations: section=%s, file=%s"
605@ MSG_REL_ACTIVE	"performing active relocations"
606@ MSG_REL_CREATING	"creating output relocations"
607@ MSG_REL_START		"relocation processing: file=%s%s"
608@ MSG_REL_FINISH	"relocation processing: file=%s; finished%s"
609@ MSG_REL_NONE		"relocation processing: file=%s%s; nothing to do"
610
611@ MSG_REL_PLT		"  (plt processing only)"
612@ MSG_REL_FAIL		"  (failed)"
613
614@ MSG_REL_BADROFFSET	"<offset lies outside memory image; \
615			 relocation discarded>"
616
617@ MSG_REL_TRANSITION	"relocation: %s: section=%s; input from file=%s; \
618			 offset=0x%llx; symbol=%s; transitioned to: %s"
619@ MSG_REL_DISCARDED	"relocation against discarded section=%s from file=%s; \
620			 relocation type=%s offset=0x%llx; relocation discarded"
621@ MSG_REL_COPY		"copy data from file=%s to file=%s: symbol '%s'%s"
622@ MSG_REL_SLOPPYCOMDAT	"the following relocation references a discarded \
623			 section; relocation redirected to section %s in \
624			 file %s"
625
626# Entrance criteria messages
627
628@ MSG_ECR_TITLE		"Segment Entrance Criteria Descriptor List"
629@ MSG_ECR_DESC		"entrance descriptor[%u]"
630
631
632# Elf Data (section) messages
633# TRANSLATION_NOTE - the following two entries provide for a series of one or
634# more standard 32-bit Elf_Data entries that align with the initial title.
635
636@ MSG_EDATA_TITLE_32	"            addr type        size   offset al file"
637@ MSG_EDATA_ENTRY_32	"  %3s %#10llx %-5s %#10llx %#8llx %2lld %s %s%s"
638
639# TRANSLATION_NOTE - the following two entries provide for a series of one or
640# more standard 64-bit Elf_Data entries that align with the initial title.
641
642@ MSG_EDATA_TITLE_64	"                    addr type                \
643			 size           offset al file"
644@ MSG_EDATA_ENTRY_64	"  %3s %#18llx %-5s %#18llx %#16llx %2lld %s %s%s"
645
646@ MSG_EDATA_IGNSCN	"  (section ignored)"
647
648# File messages
649
650@ MSG_FIL_BASIC		"file=%s  [ %s ]"
651@ MSG_FIL_ARCHIVE	"file=%s  [ archive ] %s"
652@ MSG_FIL_SKIP_1	"file=%s;  skipped: already processed as %s"
653@ MSG_FIL_SKIP_2	"file=%s;  skipped: already processed"
654@ MSG_FIL_REUSE		"file=%s;  reusing: originally processed as %s"
655@ MSG_FIL_PROT		"file=%s;  modifying memory protections (%c PROT_WRITE)"
656@ MSG_FIL_DELETE	"file=%s;  deleting"
657@ MSG_FIL_CLEANUP	"file=%s;  loading failed: cleaning up lmco 0x%llx"
658@ MSG_FIL_LAZYLOAD	"file=%s;  lazy loading from file=%s: symbol=%s"
659@ MSG_FIL_PRELOAD	"file=%s;  preloading"
660@ MSG_FIL_NEEDED	"file=%s;  needed by %s"
661@ MSG_FIL_FILTER_1	"file=%s;  filter for %s  (configuration definition)"
662@ MSG_FIL_FILTER_2	"file=%s;  filter for %s"
663@ MSG_FIL_FILTEE_2	"file=%s;  filtee processing failed"
664@ MSG_FIL_FILTEE_3	"file=%s;  filtee skipped  (auditing directed)"
665@ MSG_FIL_FIXNAME	"file=%s;  required name=%s"
666@ MSG_FIL_PROMOTE	"file=%s;  promoting mode to %s"
667@ MSG_FIL_AOUT		"file=%s  [ AOUT ]; generating link map"
668@ MSG_FIL_ELF		"file=%s  [ ELF ]; generating link map%s"
669@ MSG_FIL_LDSO		"file=%s  [ ELF ]"
670
671# NOTE: these are used by lari(1), use care when changing.
672@ MSG_FIL_ANALYZE	"file=%s;  analyzing  %s"
673@ MSG_FIL_FILTEE_1	"file=%s;  filtered by %s"
674@ MSG_FIL_CONFIG	"file=%s  [ ELF ]; configuration alternate found: %s"
675
676
677@ MSG_FIL_DATA_AS	"    addr:     %#18llx  size:   %#18llx"
678@ MSG_FIL_DATA_LL	"    lmid:     %18.18s  lmco:   %#18llx"
679@ MSG_FIL_DATA_EA	"    envp:     %#18llx  auxv:   %#18llx"
680
681@ MSG_FIL_MMAPOBJ	"file=%s  mmapobj entries=%d"
682@ MSG_FIL_MMAPOBJ_1	"  [%d]: addr:  %#18llx  fsize:  %#18llx  %s"
683@ MSG_FIL_MMAPOBJ_2	"       offset: %#17llx  msize:  %#18llx"
684
685@ MSG_FIL_BND_ADD	"file=%s;  add binding to:"
686@ MSG_FIL_BND_FILE	"    file=%s   %s"
687
688@ MSG_FIL_DEP_TITLE	"processing %s dependencies  %s:"
689@ MSG_FIL_DEP_NONE	"  file=%s;  has no dependencies"
690@ MSG_FIL_DEP_ENT	"  file=%s;  depends on:"
691
692@ MSG_FIL_DEP_ADD	"    file=%s;  object added  %s  %s"
693@ MSG_FIL_DEP_UPDATE	"    file=%s;  object updated  %s  %s"
694@ MSG_FIL_DEP_DELETE	"    file=%s;  object deleting  %s"
695@ MSG_FIL_DEP_REMOVE	"    file=%s;  object removed from handle  %s"
696@ MSG_FIL_DEP_REMAIN	"    file=%s;  object must remain on handle  %s"
697@ MSG_FIL_DEP_ORPHAN	"    file=%s;  object remains on orphan handle  %s"
698@ MSG_FIL_DEP_REINST	"    file=%s;  object reinstated  %s"
699
700@ MSG_FIL_HDL_CREATE	"handle=%s;  creating  %s  0x%llx:"
701@ MSG_FIL_HDL_ADD	"handle=%s;  adding dependent objects  %s:"
702@ MSG_FIL_HDL_DELETE	"handle=%s;  inspecting for deletion:"
703@ MSG_FIL_HDL_ORPHAN	"handle=%s;  deletion cannot be completed: moving to \
704			 orphan list:"
705@ MSG_FIL_HDL_REINST	"handle=%s;  reinstating from orphan list:"
706
707@ MSG_FIL_HDL_COLLECT	"handle=%s;  collected for possible removal  %s"
708@ MSG_FIL_HDL_RETAIN	"handle=%s;  externally referenced from %s: handle \
709			 retained"
710@ MSG_FIL_DEL_RESCAN	"pending deletions; rescanning orphan list for \
711			 available deletions"
712
713@ MSG_FIL_AR_RESCAN	"rescanning archives from args[%d-%d]; additional \
714			 members may satisfy prior extractions"
715
716@ MSG_FIL_CONFIG_ERR	"configuration file=%s: %s"
717@ MSG_FIL_CONFIG_ERR_1	"ignored (configuration building)"
718@ MSG_FIL_CONFIG_ERR_2	"invalid version"
719@ MSG_FIL_CONFIG_ERR_3	"unable to process file"
720@ MSG_FIL_CONFIG_ERR_4	"corrupt or truncated file"
721@ MSG_FIL_CONFIG_ERR_5	"incompatible ELF class, byte order, or machine \
722			 architecture"
723
724@ MSG_FIL_MODIFIED	"file=%s; open modified by support library: %s"
725@ MSG_FIL_NAMECHANGE	"    name changed to: %s"
726@ MSG_FIL_FDCHANGE	"    file descriptor changed from: %d to: %d %s"
727@ MSG_FIL_ELFCHANGE	"    ELF descriptor changed from: 0x%llx to: 0x%llx %s"
728@ MSG_FIL_IGNORE	" (file will be ignored)"
729
730@ MSG_CNTL_TITLE	"control list processing complete: moving lmco 0x%llx \
731			 to lmco 0x%llx"
732
733@ MSG_REJ_MACH		"file=%s;  rejected: wrong machine type: %s"
734@ MSG_REJ_CLASS		"file=%s;  rejected: wrong ELF class: %s"
735@ MSG_REJ_DATA		"file=%s;  rejected: wrong ELF data format: %s"
736@ MSG_REJ_TYPE		"file=%s;  rejected: bad ELF type: %s"
737@ MSG_REJ_BADFLAG	"file=%s;  rejected: bad ELF flags value: %s"
738@ MSG_REJ_MISFLAG	"file=%s;  rejected: mismatched ELF flags value: %s"
739@ MSG_REJ_VERSION	"file=%s;  rejected: mismatched ELF/lib version: %s"
740@ MSG_REJ_HAL		"file=%s;  rejected: HAL R1 extensions required"
741@ MSG_REJ_US3		"file=%s;  rejected: Sun UltraSPARC III extensions \
742			 required"
743@ MSG_REJ_STR		"obj=%s;  rejected: %s"
744@ MSG_REJ_UNKFILE	"obj=%s;  rejected: unknown file type"
745@ MSG_REJ_UNKCAP	"obj=%s;  rejected: unknown capability: %d"
746@ MSG_REJ_HWCAP_1	"obj=%s;  rejected: hardware capability (CA_SUNW_HW_1) \
747			 unsupported: %s"
748@ MSG_REJ_SFCAP_1	"obj=%s;  rejected: software capability (CA_SUNW_SF_1) \
749			 unsupported: %s"
750@ MSG_REJ_MACHCAP	"obj=%s;  rejected: machine capability (CA_SUNW_MACH) \
751			 unsupported: %s"
752@ MSG_REJ_PLATCAP	"obj=%s;  rejected: platform capability (CA_SUNW_PLAT) \
753			 unsupported: %s"
754@ MSG_REJ_HWCAP_2	"obj=%s;  rejected: hardware capability (CA_SUNW_HW_2) \
755			 unsupported: %s"
756
757# Libs messages
758
759@ MSG_LIB_INITPATH	"Library Search Paths (initial)"
760@ MSG_LIB_UPPATH	"Library Search Paths (-L updated)"
761@ MSG_LIB_LOPT		"find lib=-l%s; path=%s"
762@ MSG_LIB_REQUIRED	"find lib=%s; path=%s (required by %s)"
763@ MSG_LIB_LDLIBPATH	" search path=%s  (LD_LIBRARY_PATH)"
764@ MSG_LIB_LDLIBPATHC	" search path=%s  (configuration LD_LIBRARY_PATH - %s)"
765@ MSG_LIB_RUNPATH	" search path=%s  (RUNPATH/RPATH from file %s)"
766@ MSG_LIB_DEFAULT	" search path=%s  (default)"
767@ MSG_LIB_DEFAULTC	" search path=%s  (configuration default - %s)"
768@ MSG_LIB_TDEFAULT	" search path=%s  (trusted default)"
769@ MSG_LIB_TDEFAULTC	" search path=%s  (trusted configuration default - %s)"
770@ MSG_LIB_LIBPATH	" search path=%s  (LIBPATH or -YP)"
771@ MSG_LIB_YPATH		" search path=%s  replaces  path=%s  (-Y%c)"
772
773@ MSG_LIB_FIND		"find object=%s; searching"
774@ MSG_LIB_TRYING	" trying path=%s%s"
775@ MSG_LIB_ALTER		" trying path=%s  (auditing supplied alternative)"
776@ MSG_LIB_SKIP		"   skip path=%s  (auditing directed)"
777@ MSG_LIB_IGNORE	" ignore path=%s  (insecure directory name)"
778@ MSG_LIB_INUSE		"    use path=%s  (implicitly secure, as directory \
779			 has already provided dependencies)"
780
781# Mapfile messages
782
783@ MSG_MAP_MAPFILE	"mapfile=%s; version=%d (%s)"
784@ MSG_MAP_SEG		"segment directive; line=%llu; %s"
785@ MSG_MAP_SEG_ORDER	"segment order directive; line=%llu; list_cnt=%lld; %s"
786@ MSG_MAP_CAP		"capability directive; line=%llu"
787@ MSG_MAP_EC		"entrance criteria; line=%llu; added"
788@ MSG_MAP_OS_ORDER	"output section ordering; line=%llu; segment=%s \
789			 section=%s; index=%d"
790@ MSG_MAP_HDR_NOALLOC	"header noalloc directive; line=%llu; first loadable \
791			 segment will not contain ELF and program headers"
792
793@ MSG_MAP_SYM_SCOPE	"symbol scope definition"
794@ MSG_MAP_SYM_SIZE	"size-symbol directive; line=%llu; segment=%s; \
795			 symbol=%s; %s"
796@ MSG_MAP_SYM_VER_1	"%s, %s; symbol=%s  (%s)"
797@ MSG_MAP_SYM_VER_2	"%s; symbol=%s  (%s)"
798
799@ MSG_MAP_DV		"depend versions directive; line=%llu, object=%s"
800@ MSG_MAP_DV_ENTRY	"%12.12s  %s; line=%llu"
801
802@ MSG_MAP_SORT_TITLE	"mapfile additions: segment sorting required"
803@ MSG_MAP_SORT_TITLE_O	"before:"
804@ MSG_MAP_SORT_TITLE_S	"after:"
805@ MSG_MAP_POST_TITLE	"mapfile post processing"
806@ MSG_MAP_ENT_ORD_TITLE	"set entrance criteria input section sort keys; \
807			 segment=%s"
808
809@ MSG_MAP_ID_ADD	"%s: %lld: enter conditional expression id: %s"
810@ MSG_MAP_ID_CLEAR	"%s: %lld: delete conditional expression id: %s"
811@ MSG_MAP_PASS		"%s: %lld: input enabled by %s"
812@ MSG_MAP_NOPASS	"%s: %lld: input disabled by %s"
813
814# Move messages
815
816@ MSG_MOVE_FILE		"file=%s  processing move data"
817
818@ MSG_MOVE_TITLE1	"  i/o     offset   size repeat stride            \
819			 value  with respect to"
820@ MSG_MOVE_TITLE2	"  i/o    address   size repeat stride            \
821			 value  with respect to"
822
823@ MSG_MOVE_ENTRYIN	"   in %#10llx %6d %6d %6d %#16llx  %s"
824@ MSG_MOVE_ENTRYOUT	"  out %#10llx %6d %6d %6d %#16llx  %s"
825@ MSG_MOVE_EXPAND	"      %#10llx                      %#16llx  (expanded)"
826
827@ MSG_MOVE_ADJEXPAND	"for symbol=%s roffset: new=0x%llx"
828@ MSG_MOVE_ADJMOVE	"for symbol=%s roffset: from=0x%llx, to=0x%llx"
829@ MSG_MOVE_OUTSCTADJ	"adjusting addend for symbol=%s"
830@ MSG_MOVE_PAREXPN	"expanding symbol=%s into .data: %s"
831@ MSG_MOVE_OUTMOVE	"copying move entries for symbol=%s into .SUNW_move"
832@ MSG_MOVE_INPUT	"collecting move entries: file=%s"
833@ MSG_MOVE_BAD		"move %lld offset invalid: %s: offset=0x%llx \
834			 lies outside memory image; move discarded"
835
836# Section header messages
837
838@ MSG_SHD_MODIFIED	"section=%s; section header modified by support \
839			 library: %s"
840@ MSG_SHD_ORIG		"  original:"
841@ MSG_SHD_NEW		"  new:"
842
843# TRANSLATION_NOTE - The following two items are used following a number in
844# the MSG_SHD_OFFSET_ENT_XX format strings below. For example "1 entry"
845# or "23 entries".
846#
847@ MSG_SHD_ENTRY_1	"entry"
848@ MSG_SHD_ENTRY_N	"entries"
849
850
851# Section messages
852
853@ MSG_SEC_BACKING	"mapfile symbol definitions: create backing storage:"
854
855@ MSG_SEC_INPUT		"section=%s; input from file=%s"
856@ MSG_SEC_INPUT_GEN	"section=%s"
857@ MSG_SEC_INPUT_GENSTR	"section=%s; input generated merged string section"
858@ MSG_SEC_ADDED		"section=%s; added to segment=%s"
859@ MSG_SEC_CREATED	"section=%s; added to segment=%s (created)"
860@ MSG_SEC_REDIRECTED	"section=%s; redirected to section=%s"
861@ MSG_SEC_DISCARDED	"section=%s; input from file=%s; \
862			 discarded in favor of section=%s; file=%s"
863
864@ MSG_SEC_GNU_COMDAT_1	"section=%s; identified as COMDAT with \
865			 relaxed relocations enabled"
866@ MSG_SEC_GNU_COMDAT_2	"section=%s; identified as COMDAT"
867@ MSG_SEC_GNU_COMDAT_3	"section=%s; relaxed relocations enabled"
868
869@ MSG_SEC_GRP_DEFINE	"section=%s; input from file=%s; defines %s\
870			 group: signature symbol: %s"
871@ MSG_SEC_GRP_MEMBER	"section=%s; input from file=%s; member of %s\
872			 group: signature symbol: %s"
873@ MSG_SEC_GRP_DISCARDED	"section=%s; input from file=%s; discarded in \
874			 favor of group: signature symbol: %s: file=%s"
875
876@ MSG_SEC_STRMERGE_DISCARDED "section=%s; input from file=%s; \
877			 discarded in favor of generated merged string section"
878@ MSG_SEC_STRMERGE_UNSUP "section=%s; input from file=%s; sh_addralign=%lld; \
879			  sh_entsize=%lld; unable to merge sections with this \
880			  size and alignment"
881
882@ MSG_SEC_STRTAB_STND	"strtab=%s; full size: %lld; uncompressed"
883@ MSG_SEC_STRTAB_COMP	"strtab=%s; full size: %lld; compressed down to: %lld"
884@ MSG_SEC_GENSTR_COMP	"section=%s (generated merged string section); \
885			 full size: %lld; compressed down to: %lld"
886@ MSG_SEC_STRTAB_HD	"strtab=%s; compression information [%d buckets]:"
887@ MSG_SEC_STRTAB_BCKT	" bucket[%d]:"
888@ MSG_SEC_STRTAB_MSTR	"   [%lld] %s  <master>"
889@ MSG_SEC_STRTAB_SUFSTR	"   [%lld] %s  <suffix of: %s>"
890
891# Unused messages
892
893@ MSG_USD_SEC		"section=%s; size=0x%llx; input from file=%s; \
894			 unused: does not satisfy any references%s"
895@ MSG_USD_SECDISCARD	"; discarded"
896@ MSG_USD_FILE		"file=%s  unused: does not satisfy any references"
897@ MSG_USD_NEEDSTR	"file=%s  unused: unable to determine use"
898@ MSG_USD_UNREF		"file=%s  unreferenced: unused dependency of %s"
899@ MSG_USD_FILECYCLIC	"file=%s  unused: cyclic group [%d] member: \
900			 unreferenced outside of group"
901@ MSG_USD_LCINTERFACE	"file=%s  unused interface [%s]: using interface \
902			 from previously loaded object: file=%s"
903
904@ MSG_USD_LDLIBPATH	" search path=%s  unused: LD_LIBRARY_PATH entry"
905@ MSG_DUP_LDLIBPATH	" search path=%s  unused: (duplicate) LD_LIBRARY_PATH \
906			 entry"
907@ MSG_USD_LDLIBPATHC	" search path=%s  unused: configuration \
908			 LD_LIBRARY_PATH entry - %s"
909@ MSG_DUP_LDLIBPATHC	" search path=%s  unused: (duplicate) configuration \
910			 LD_LIBRARY_PATH entry - %s"
911@ MSG_USD_RUNPATH	" search path=%s  unused: RUNPATH/RPATH from file %s"
912
913# Segment messages
914
915@ MSG_SEG_DESC_INUSE	"Program Header / Segment Descriptor List (in use)"
916@ MSG_SEG_DESC_AVAIL	"Program Header / Segment Descriptor List (available)"
917
918
919# Support messages
920
921@ MSG_SUP_REQ		"support object request=%s  (%s)"
922@ MSG_SUP_REQ_ENV	"supplied via SGS_SUPPORT"
923@ MSG_SUP_REQ_CMD	"supplied via -S"
924
925@ MSG_SUP_ROUTINE	"  support object=%s:  provides routine %s"
926
927@ MSG_SUP_CALLING_1	"  calling routine=%s (%s)"
928@ MSG_SUP_CALLING_2	"  calling routine=%s (%s)  %s=%s"
929@ MSG_SUP_VNONE		"  unloading object=%s: version=LD_SUP_VNONE"
930@ MSG_SUP_OUTFILE	"output file"
931@ MSG_SUP_INFILE	"input file"
932@ MSG_SUP_INSEC		"input section"
933@ MSG_SUP_SEC		"section"
934
935# Symbol strings
936@ MSG_SYM_AR_FILE	"symbol table processing; input file=%s  [ archive ] %s"
937@ MSG_SYM_AR_ENTRY	"archive[%lld]=%s"
938@ MSG_SYM_AR_CHECK	"archive[%lld]=%s  (%s) checking for tentative or \
939			 restricted visibility override"
940@ MSG_SYM_AR_RESOLVE	"archive[%lld]=%s  (%s) resolves undefined or tentative \
941			 symbol"
942@ MSG_SYM_AR_FORCEDEXRT	"archive[%lld]=%s  (%s) forced extraction"
943
944@ MSG_SYM_SPECIAL	"symbol table processing; building special symbols"
945@ MSG_SYM_PROCESS	"symbol table processing; input file=%s  [ %s ]"
946@ MSG_SYM_FINAL		"symbol table processing; final update"
947@ MSG_SYM_INDEX		"symbol table processing; determining section \
948			 symbol's index"
949@ MSG_SYM_BSS		"symbol table processing; assigning to bss \
950			 (possible copy relocations)"
951@ MSG_SYM_REDUCED	"symbol table processing; reducing global symbols"
952@ MSG_SYM_RETAINING	"symbol table processing; retaining local symbols"
953@ MSG_SYM_VERSION	"symbol table processing; adding version symbols"
954@ MSG_SYM_CAPABILITIES	"symbol table processing; adding local capabilities \
955			 symbols"
956
957@ MSG_SYM_BASIC		"symbol[%d]=%s"
958@ MSG_SYM_ADDING	"symbol[%d]=%s  (global); adding"
959@ MSG_SYM_SECTION	"symbol[%d]=%s  (section); segment=%s"
960@ MSG_SYM_RESOLVING	"symbol[%d]=%s  (global); resolving [%d][%d]"
961@ MSG_SYM_UPDATE	"symbol=%s;  updated"
962@ MSG_SYM_CREATE	"symbol=%s;  creating"
963@ MSG_SYM_REDUCING	"symbol=%s;  reducing to local"
964@ MSG_SYM_ELIMINATING	"symbol=%s;  eliminating"
965@ MSG_SYM_NOTELIMINATE	"symbol=%s;  not eliminated: referenced by \
966			 section=%s, entry[%d]"
967@ MSG_SYM_DISCARD_SEC	"symbol=%s;  discarded: originates from unused or \
968			 discarded section=%s from file=%s"
969@ MSG_SYM_DISCARD_FILE	"symbol=%s;  discarded: originates from unused or \
970			 discarded file=%s"
971@ MSG_SYM_DISCARD_DUP	"symbol[%d]=%s;  discarded duplicate: originates from \
972			 file=%s"
973@ MSG_SYM_WRAP		"symbol[%d]=%s  renamed to %s (-z wrap)"
974@ MSG_SYM_CAP_ORIG	"symbol[%d]=%s  converting to symbol capability \
975			 (-z symbolcap)"
976@ MSG_SYM_CAP_LOCAL	"symbol[%d]=%s  creating local capability \
977			 (-z symbolcap)"
978
979@ MSG_SYM_AOUT		"symbol=%s;  (original AOUT name)"
980@ MSG_SYM_LOOKUP	"symbol=%s;  lookup in file=%s  [ %s ]"
981
982@ MSG_DLSYM_1		"symbol=%s;  dlsym() called from file=%s %s %s"
983@ MSG_DLSYM_2		"symbol=%s;  dlsym() called from file=%s; starting \
984			 at file=%s %s %s"
985
986@ MSG_CAP_SYM_DEFAULT	"  symbol=%s[%u]:  capability family default"
987@ MSG_CAP_SYM_USED	"  symbol=%s[%u]:  used"
988@ MSG_CAP_SYM_CANDIDATE	"  symbol=%s[%u]:  capability candidate"
989@ MSG_CAP_SYM_REJECTED	"  symbol=%s[%u]:  capability rejected"
990@ MSG_CAP_SYM_HW_1	"  symbol=%s[%u]:  capability specific \
991			 (CA_SUNW_HW_1):  [ %s ]"
992@ MSG_CAP_SYM_SF_1	"  symbol=%s[%u]:  capability specific \
993			 (CA_SUNW_SF_1):  [ %s ]"
994@ MSG_CAP_SYM_MACH	"  symbol=%s[%u]:  capability specific \
995			 (CA_SUNW_MACH):  [ %s ]"
996@ MSG_CAP_SYM_PLAT	"  symbol=%s[%u]:  capability specific \
997			 (CA_SUNW_PLAT):  [ %s ]"
998@ MSG_CAP_SYM_HW_2	"  symbol=%s[%u]:  capability specific \
999			 (CA_SUNW_HW_2):  [ %s ]"
1000
1001@ MSG_SYM_LAZY_RESCAN	"rescanning for lazy dependencies for symbol: %s"
1002
1003@ MSG_SYM_DUPSORTADDR	"section %s: symbol '%s' and symbol '%s' have the \
1004			 same address: %#llx"
1005
1006@ MSG_SYM_IGNGNUVER	"symbol=%s;  hash index=%d;  version=%d;  skipping \
1007			 symbol with GNU version hidden bit set in file=%s"
1008
1009# Syminfo string
1010
1011@ MSG_SYMINFO_INFO	"syminfo information"
1012
1013
1014# Version strings
1015
1016@ MSG_VER_AVAIL_1	"version availability: file=%s"
1017@ MSG_VER_AVAIL_2	" available  version                     selected from"
1018@ MSG_VER_DEF_TITLE	"version definition processing: file=%s"
1019@ MSG_VER_NEED_TITLE	"version needed processing: file=%s"
1020@ MSG_VER_NOINTERFACE	"version definition has no interface symbols: %s"
1021
1022# SHF_ORDERED related messages. Token used is sections.
1023
1024@ MSG_ORD_SORT_BEFORE	"section=%s; requires output section reordering:"
1025@ MSG_ORD_SORT_AFTER	"section=%s; output section reordered:"
1026@ MSG_ORD_HDR_1		" number of SHN_BEGIN=%u, ordered=%u, default=%u, \
1027			 SHN_AFTER=%u"
1028@ MSG_ORD_TITLE_1	" %s=SHN_BEGIN: section=%s from %s"
1029@ MSG_ORD_TITLE_2	" %s=SHN_AFTER: section=%s from %s"
1030@ MSG_ORD_TITLE_3	" sort key=%u: section=%s from %s, %s=%s"
1031
1032@ MSG_ORD_ERR_TITLE	"the SHF_ORDERED section %s from %s has \
1033			 an error;  flag ignored"
1034
1035@ MSG_ORD_ERR_INFORANGE	" the sh_info field is out of range"
1036@ MSG_ORD_ERR_ORDER	" the section pointed by sh_info is an ordered section"
1037@ MSG_ORD_ERR_LINKRANGE	" the sh_link field is out of range"
1038@ MSG_ORD_ERR_FLAGS	" the sh_flag is incorrect"
1039@ MSG_ORD_ERR_CYCLIC	" the sh_link is cyclic"
1040@ MSG_ORD_ERR_LINKINV	" a section pointed to by sh_link has an error"
1041
1042# Link-Auditing Messages
1043
1044@ MSG_AUD_INIT		"audit library %s: processing"
1045@ MSG_AUD_VERSION	"audit library %s: running at version: %d"
1046@ MSG_AUD_INTERFACE	"audit library %s: provides interface: %s"
1047@ MSG_AUD_OBJECT	"audit library %s: offered object: %s"
1048@ MSG_AUD_SYM		"audit library %s: %s: symbol: %s: value: 0x%llx %s"
1049@ MSG_AUD_SYMNEW	"modified to: 0x%llx"
1050
1051@ MSG_AUD_IGNORE	"file=%s;  global auditing request ignored: object \
1052			 did not initiate process"
1053@ MSG_AUD_SKIP		"file=%s;  skipped: using auditor from %s"
1054@ MSG_AUD_TERM		"file=%s;  auditing terminated search"
1055
1056# GOT Messages
1057
1058@ MSG_GOT_INFO		"Global Offset Table information:  (%u entries)"
1059
1060# TRANSLATION_NOTE
1061#	Do not translate .init or .fini, they represent reserved section names.
1062
1063@ MSG_UTL_INIT		"calling .init (%s): %s"
1064@ MSG_UTL_FINI		"calling .fini: %s"
1065@ MSG_UTL_ARRAY		"calling %s[%d]:0x%llx: %s"
1066@ MSG_UTL_TRANS		"transferring control: %s"
1067@ MSG_UTL_INTOOLATE	"loading after relocation has started: interposition \
1068			 request (DF_1_INTERPOSE) ignored: %s"
1069
1070@ MSG_UTL_EDGE_TITLE_I	"traversing %s dependency edge for interposer:"
1071@ MSG_UTL_EDGE_TITLE_S	"traversing %s dependency edge:"
1072@ MSG_UTL_EDGE_START	"  node (%d): file=%s"
1073@ MSG_UTL_EDGE_IN	"  node (%d): file=%s: referenced by %s  %s"
1074@ MSG_UTL_EDGE_OUT	"  node (%d): file=%s; cyclic dependency on %s"
1075@ MSG_UTL_COLLECT	"    [%d]  %s;  collecting %s section"
1076
1077@ MSG_UTL_SORT		"from sorted order"
1078@ MSG_UTL_PEND		"pending"
1079@ MSG_UTL_DYN		"dynamically triggered"
1080@ MSG_UTL_DONE		"done"
1081
1082@ MSG_UTL_NOINIT	"warning: calling %s whose init has not completed"
1083
1084@ MSG_UTL_DBNOTIFY	"notify debugger: event: %s state: %s"
1085
1086@ MSG_UTL_SCC_TITLE	"  cycle detected - sorting cyclic dependencies in %s"
1087@ MSG_UTL_SCC_SUBI	"reverse load-order"
1088@ MSG_UTL_SCC_SUBF	"load-order"
1089
1090@ MSG_UTL_LCINTERFACE	"file=%s;  provides interface [%s]: 0x%llx"
1091
1092# Generic strings
1093
1094@ MSG_STR_IGNORE	"ignored"
1095@ MSG_STR_ENTERED	"entered"
1096@ MSG_STR_ORIGINAL	"original"
1097@ MSG_STR_EXCLUDE	"exclude"
1098@ MSG_STR_RESET		"reset"
1099@ MSG_STR_IN		" in"
1100@ MSG_STR_OUT		"out"
1101@ MSG_STR_ACT		"act"
1102@ MSG_STR_CURRENT	"current"
1103@ MSG_STR_ADD		"add"
1104@ MSG_STR_OLD		"old"
1105@ MSG_STR_NEW		"new"
1106@ MSG_STR_NEW_IMPLICIT	"new (implicit)"
1107@ MSG_STR_RESOLVED	"resolved"
1108@ MSG_STR_ADDING	"adding"
1109@ MSG_STR_UP_1		"updating"
1110@ MSG_STR_UP_2		"updated"
1111@ MSG_STR_ALLOW		"allow"
1112@ MSG_STR_REQUIRE	"require"
1113@ MSG_STR_MOD_BEFORE	"modify (before)"
1114@ MSG_STR_MOD_AFTER	"modify (after)"
1115
1116@ MSG_STR_UNKNOWN	"<unknown>"
1117@ MSG_STR_ORPHAN	"<orphan>"
1118
1119@ MSG_STR_UNUSED	"(unused)"
1120@ MSG_STR_AGAIN		"(again)"
1121@ MSG_STR_NULL		"(null)"
1122@ MSG_STR_ALTER		"  (alternate)"
1123@ MSG_STR_COPYZERO	"  (copy zero's unnecessary)"
1124@ MSG_STR_TEMPORARY	"  (temporary)"
1125@ MSG_STR_RETRY		" (retry) "
1126
1127# TLS related messages
1128
1129@ MSG_TLS_STATBLOCK1	"static TLS module: [%ld] %s"
1130@ MSG_TLS_STATBLOCK2	"static TLS reservation: in use %#llx: \
1131			 additional backup: %#llx"
1132@ MSG_TLS_STATBLOCK3	"static TLS requirement: [%ld] %s: size %#llx: \
1133			 satisfied from backup reservation: remaining %#llx"
1134@ MSG_TLS_MODENT1	"    block:  %#18llx    soff:   %#10llx  flags:  %#llx \
1135			 %s"
1136@ MSG_TLS_MODENT2	"    filesz: %#18llx    memsz:  %#10llx  modid:  %lld"
1137@ MSG_TLS_MODACT	"%s TLS module: %s"
1138@ MSG_TLS_ADD		"add"
1139@ MSG_TLS_REMOVE	"remove"
1140
1141# Statistics related messages
1142
1143@ MSG_STATS_AR		"archive %s: count=%d, used=%d  (%d%%)"
1144
1145@ MSG_STATS_GENERAL	"General Statistics:"
1146@ MSG_STATS_FILES	"  Input files: relocatables=%lld  \
1147			 shared objects=%lld  archives=%lld"
1148@ MSG_STATS_SYMBOLS_OUT	"      Symbols output: globals=%-10lld locals=%lld"
1149@ MSG_STATS_SYMBOLS_IN	"      Symbols  input: globals=%-10lld scoped=%-10lld \
1150			 eliminated=%lld"
1151@ MSG_STATS_RELOCS_OUT	"  Relocations output: records=%lld"
1152@ MSG_STATS_RELOCS_IN	"  Relocations  input: records=%-10lld applied=%lld"
1153
1154# Capabilities messages
1155
1156@ MSG_CAP_SYS_HW_1	"hardware capabilities (CA_SUNW_HW_1) - %s"
1157@ MSG_CAP_SYS_SF_1	"software capabilities (CA_SUNW_SF_1) - %s"
1158@ MSG_CAP_SYS_MACH	"machine capability (CA_SUNW_MACH) - %s"
1159@ MSG_CAP_SYS_PLAT	"platform capability (CA_SUNW_PLAT) - %s"
1160@ MSG_CAP_SYS_HW_2	"hardware capabilities (CA_SUNW_HW_2) - %s"
1161
1162@ MSG_CAP_ALT_HW_1	"alternative hardware capabilities (CA_SUNW_HW_1) - %s"
1163@ MSG_CAP_ALT_SF_1	"alternative software capabilities (CA_SUNW_SF_1) - %s"
1164@ MSG_CAP_ALT_MACH	"alternative machine capability (CA_SUNW_MACH) - %s"
1165@ MSG_CAP_ALT_PLAT	"alternative platform capability (CA_SUNW_PLAT) - %s"
1166@ MSG_CAP_ALT_HW_2	"alternative hardware capabilities (CA_SUNW_HW_2) - %s"
1167
1168@ MSG_CAP_SEC_TITLE	"capabilities; input file=%s"
1169@ MSG_CAP_SEC_ENTRY     "%12.12s  %-15.15s  %s"
1170
1171@ MSG_CAP_CANDIDATE	"obj=%s;  capabilities candidate"
1172@ MSG_CAP_POST_TITLE	"capabilities post processing"
1173
1174@ MSG_CAP_FILTER_1	"dir=%s;  capability directory filtered by %s"
1175@ MSG_CAP_FILTER_2	"dir=%s;  no capability objects found"
1176
1177@ MSG_ELF_HEADER	"ELF Header"
1178
1179# Capabilities entries.
1180# TRANSLATION_NOTE - the following two entries provide for a series of one or
1181# more capabilities table entries that align with the initial title.
1182
1183@ MSG_CAP_ELF_TITLE	"     index  tag               value"
1184@ MSG_CAP_ELF_ENTRY	"%10.10s  %-15.15s  %s"
1185
1186# Dynamic entries.
1187# TRANSLATION_NOTE - the following two entries provide for a series of one or
1188# more dynamic table entries that align with the initial title.
1189
1190@ MSG_DYN_TITLE		"     index  tag                value"
1191@ MSG_DYN_ENTRY		"%10.10s  %-16.16s  %-#16llx    %s"
1192
1193# Symbol table entries.
1194# TRANSLATION_NOTE - the following entries provide for a series of one or more
1195# standard 32-bit symbol table entries that align with the initial title.
1196
1197@ MSG_SYM_EFS_TITLE_32	"     index    value      size      type bind \
1198			 oth ver shndx          name"
1199@ MSG_SYM_LDS_TITLE_32	"              value      size      type bind \
1200			 oth ver shndx"
1201@ MSG_SYM_EFS_ENTRY_32	"%10.10s  %10.10s 0x%8.8x  %4s %4s %2s %4s \
1202			 %-14.14s %s"
1203
1204# TRANSLATION_NOTE - the following entries provide for a series of one or more
1205# long 32-bit symbol table entries that align with the initial title.
1206
1207@ MSG_SYM_EFL_TITLE_32	"     index    value      size      type bind \
1208			 oth ver shndx / name"
1209@ MSG_SYM_LDL_TITLE_32	"              value      size      type bind \
1210			 oth ver shndx"
1211@ MSG_SYM_EFL_ENTRY_32	"%10.10s  %10.10s 0x%8.8x  %4s %4s %2s %4s \
1212			 %-14s %s"
1213
1214# TRANSLATION_NOTE - the following entries provide for a series of one or more
1215# standard 64-bit symbol table entries that align with the initial title.
1216
1217@ MSG_SYM_EFS_TITLE_64	"     index    value              size              \
1218			 type bind oth ver shndx          name"
1219@ MSG_SYM_LDS_TITLE_64	"              value              size              \
1220			 type bind oth ver shndx"
1221@ MSG_SYM_EFS_ENTRY_64	"%10.10s  %18.18s 0x%16.16llx  %4s %4s %2s %4s \
1222			 %-14.14s %s"
1223
1224# TRANSLATION_NOTE - the following entries provide for a series of one or more
1225# long 64-bit symbol table entries that align with the initial title.
1226
1227@ MSG_SYM_EFL_TITLE_64	"     index    value              size              \
1228			 type bind oth ver shndx / name"
1229@ MSG_SYM_LDL_TITLE_64	"              value              size              \
1230			 type bind oth ver shndx"
1231@ MSG_SYM_EFL_ENTRY_64	"%10.10s  %18.18s 0x%16.16llx  %4s %4s %2s %4s \
1232			 %-14s %s"
1233
1234
1235# Syminfo entries.
1236# TRANSLATION_NOTE - the following two entries provide for a series of one or
1237# more symbol information table entries that align with the initial title.
1238
1239@ MSG_SYMINFO_TITLE	"     index  flags            \
1240			 bound to                 symbol"
1241@ MSG_SYMINFO_ENTRY	"%10.10s  %-8s %7s %-24s %s"
1242
1243@ MSG_SYMINFO_CAP	"<symbol capabilities>"
1244@ MSG_SYMINFO_SELF	"<self>"
1245@ MSG_SYMINFO_PARENT	"<parent>"
1246@ MSG_SYMINFO_EXTERN	"<extern>"
1247
1248
1249# Global offset table entries.
1250# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and
1251# provide for a series of one or more 32-bit got table entries that align with
1252# the initial title.
1253
1254@ MSG_GOT_TITLE_32	"     index    addr        value     \
1255			 pending relocation"
1256@ MSG_GOT_ENTRY_RE_32	"%10.10s  0x%08llx  0x%08llx  %-24s  %s"
1257@ MSG_GOT_ENTRY_NR_32	"%10.10s  0x%08llx  0x%08llx"
1258
1259# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and
1260# provide for a series of one or more 64-bit got table entries that align with
1261# the initial title.
1262
1263@ MSG_GOT_TITLE_64	"     index    addr                \
1264			 value             pending relocation"
1265@ MSG_GOT_ENTRY_RE_64	"%10.10s  0x%016llx  0x%016llx  %-24s  %s"
1266@ MSG_GOT_ENTRY_NR_64	"%10.10s  0x%016llx  0x%016llx"
1267
1268# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide
1269# for a series of one or more 32-bit got table entries that align with one of
1270# the initial titles.
1271
1272@ MSG_GOT_COLUMNS1_32	"     index ref      offset    addend    symbol"
1273@ MSG_GOT_COLUMNS2_32	"     index ref      offset    value     symbol"
1274@ MSG_GOT_FORMAT1_32	"%10.10s %3s  0x%08llx  0x%08llx  %s"
1275@ MSG_GOT_FORMAT2_32	"%10.10s %3s  0x%08llx  0x%08llx  %s:%s"
1276
1277# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide
1278# for a series of one or more 64-bit got table entries that align with one of
1279# the initial titles.
1280
1281@ MSG_GOT_COLUMNS1_64	"     index ref    offset              \
1282			 addend            symbol"
1283@ MSG_GOT_COLUMNS2_64	"     index ref    offset              \
1284			 value             symbol"
1285@ MSG_GOT_FORMAT1_64	"%10.10s %3s  0x%016llx  0x%016llx  %s"
1286@ MSG_GOT_FORMAT2_64	"%10.10s %3s  0x%016llx  0x%016llx  %s:%s"
1287
1288# Version table entries.
1289@ MSG_VER_DEF		"     index  version                     dependency"
1290@ MSG_VER_NEED		"            file                        version"
1291@ MSG_VER_NEED_GNUVER	"     index  file                        version"
1292
1293@ MSG_VER_LINE_1	"%10.10s  %-26.26s  %-20s %s"
1294@ MSG_VER_LLINE_1	"%10s  %-26s  %-20s %s"
1295@ MSG_VER_LINE_2	"%47s  %s"
1296@ MSG_VER_LINE_3	"%38s  %-20s %s"
1297@ MSG_VER_LINE_4	"                                        %s"
1298@ MSG_VER_LINE_5	"            %-26.26s  %s"
1299@ MSG_VER_LLINE_5	"            %-26s  %s"
1300
1301
1302# Relocation entries.
1303# TRANSLATION_NOTE - the following strings are used by elfdump(1).  These
1304# strings provide for a series of one or more 32-bit relocation table entries,
1305# using truncated section names, that align with one of the initial titles.
1306
1307@ MSG_REL_EFSA_TITLE_32	"    type                       offset     addend  \
1308			 section        symbol"
1309@ MSG_REL_EFSN_TITLE_32	"    type                       offset             \
1310			 section        symbol"
1311@ MSG_REL_EFSA_ENTRY_32	"  %-24s %#10llx %#10llx  %-14.14s %s"
1312@ MSG_REL_EFSN_ENTRY_32	"  %-24s %#10llx             %-14.14s %s"
1313
1314# TRANSLATION_NOTE - the following strings are used by elfdump(1).  These
1315# strings provide for a series of one or more 32-bit relocation table entries,
1316# using long section names, that align with one of the initial titles.
1317
1318@ MSG_REL_EFLA_TITLE_32	"    type                       offset     addend  \
1319			 section / symbol"
1320@ MSG_REL_EFLN_TITLE_32	"    type                       offset             \
1321			 section / symbol"
1322@ MSG_REL_EFLA_ENTRY_32	"  %-24s %#10llx %#10llx  %-14s %s"
1323@ MSG_REL_EFLN_ENTRY_32	"  %-24s %#10llx             %-14s %s"
1324
1325
1326# TRANSLATION_NOTE - the following strings are used by ld.so.1(1).  These
1327# strings provide for a series of one or more 32-bit relocation table entries,
1328# that align with the initial titles.
1329
1330@ MSG_REL_RTA_TITLE_32	"         type                       offset     \
1331			 addend  symbol"
1332@ MSG_REL_RTN_TITLE_32	"         type                       offset      \
1333			 value  symbol"
1334@ MSG_REL_RTV_TITLE_32	"                                                value"
1335@ MSG_REL_RTA_ENTRY_32	" %5s %-24s %#10llx %#10llx  %s  %s"
1336@ MSG_REL_RTN_ENTRY_32	" %5s %-24s %#10llx             %s  %s"
1337@ MSG_REL_RT_APLVAL_32	" apply                          %#10llx %#10llx"
1338@ MSG_REL_RT_APLREG_32	" apply                          %10.10s %#10llx"
1339
1340
1341# TRANSLATION_NOTE - the following strings are used by ld(1).  These strings
1342# provide for a series of one or more 32-bit relocation table entries, using
1343# truncated section names, that align with one of the initial titles.
1344
1345@ MSG_REL_LDSA_TITLE_32	"         type                       \
1346			 offset     addend  section        symbol"
1347@ MSG_REL_LDSN_TITLE_32	"         type                       \
1348			 offset             section        symbol"
1349@ MSG_REL_LDSA_ENTRY_32	" %5s %-24s %#10llx %#10llx  %-14.14s %s  %s"
1350@ MSG_REL_LDSN_ENTRY_32	" %5s %-24s %#10llx             %-14.14s %s  %s"
1351
1352@ MSG_REL_LDSV_TITLE_32	"         type                       \
1353			 offset      value  section        symbol"
1354
1355# TRANSLATION_NOTE - the following strings are used by ld(1).  These strings
1356# provide for a series of one or more 32-bit relocation table entries, using
1357# long section names, that align with one of the initial titles.
1358
1359@ MSG_REL_LDLA_TITLE_32	"         type                       \
1360			 offset     addend  section / symbol"
1361@ MSG_REL_LDLN_TITLE_32	"         type                       \
1362			 offset             section / symbol"
1363@ MSG_REL_LDLA_ENTRY_32	" %5s %-24s %#10llx %#10llx  %-14s %s  %s"
1364@ MSG_REL_LDLN_ENTRY_32	" %5s %-24s %#10llx             %-14s %s  %s"
1365
1366@ MSG_REL_LDLV_TITLE_32	"         type                       \
1367			 offset      value  section / symbol"
1368
1369# TRANSLATION_NOTE - the following strings are used by elfdump(1).  These
1370# strings provide for a series of one or more 64-bit relocation table entries,
1371# using truncated section names, that align with one of the initial titles.
1372
1373@ MSG_REL_EFSA_TITLE_64	"    type                               \
1374			 offset             addend  section        symbol"
1375@ MSG_REL_EFSN_TITLE_64	"    type                               \
1376			 offset                     section        symbol"
1377@ MSG_REL_EFSA_ENTRY_64	"  %-24s %#18llx %#18llx  %-14.14s %s"
1378@ MSG_REL_EFSN_ENTRY_64	"  %-24s %#18llx                     %-14.14s %s"
1379
1380# TRANSLATION_NOTE - the following strings are used by elfdump(1).  These
1381# strings provide for a series of one or more 64-bit relocation table entries,
1382# using long section names, that align with one of the initial titles.
1383
1384@ MSG_REL_EFLA_TITLE_64	"    type                               \
1385			 offset             addend  section / symbol"
1386@ MSG_REL_EFLN_TITLE_64	"    type                               \
1387			 offset                     section / symbol"
1388@ MSG_REL_EFLA_ENTRY_64	"  %-24s %#18llx %#18llx  %-14s %s"
1389@ MSG_REL_EFLN_ENTRY_64	"  %-24s %#18llx                     %-14s %s"
1390
1391
1392# TRANSLATION_NOTE - the following strings are used by ld.so.1(1).  These
1393# strings provide for a series of one or more 64-bit relocation table entries,
1394# that align with the initial titles.
1395
1396@ MSG_REL_RTA_TITLE_64	"         type                               \
1397			 offset             addend  symbol"
1398@ MSG_REL_RTN_TITLE_64	"         type                               \
1399			 offset              value  symbol"
1400@ MSG_REL_RTV_TITLE_64	"                                                                value"
1401@ MSG_REL_RTA_ENTRY_64	" %5s %-24s %#18llx %#18llx  %s  %s"
1402@ MSG_REL_RTN_ENTRY_64	" %5s %-24s %#18llx                    %s  %s"
1403@ MSG_REL_RT_APLVAL_64	" apply                          %#18llx %#18llx"
1404@ MSG_REL_RT_APLREG_64	" apply                          %18.18s %#18llx"
1405
1406# TRANSLATION_NOTE - the following strings are used by ld(1).  These strings
1407# provide for a series of one or more 64-bit relocation table entries, using
1408# truncated section names, that align with one of the initial titles.
1409
1410@ MSG_REL_LDSA_TITLE_64	"         type                               \
1411			 offset             addend  section        symbol"
1412@ MSG_REL_LDSN_TITLE_64	"         type                               \
1413			 offset                     section        symbol"
1414@ MSG_REL_LDSA_ENTRY_64	" %5s %-24s %#18llx %#18llx  %-14.14s %s  %s"
1415@ MSG_REL_LDSN_ENTRY_64	" %5s %-24s %#18llx                     %-14.14s %s  %s"
1416
1417@ MSG_REL_LDSV_TITLE_64	"         type                               \
1418			 offset              value  section        symbol"
1419
1420# TRANSLATION_NOTE - the following strings are used by ld(1).  These strings
1421# provide for a series of one or more 64-bit relocation table entries, using
1422# long section names, that align with one of the initial titles.
1423
1424@ MSG_REL_LDLA_TITLE_64	"         type                               \
1425			 offset             addend  section / symbol"
1426@ MSG_REL_LDLN_TITLE_64	"         type                               \
1427			 offset                     section / symbol"
1428@ MSG_REL_LDLA_ENTRY_64	" %5s %-24s %#18llx %#18llx  %-14s %s  %s"
1429@ MSG_REL_LDLN_ENTRY_64	" %5s %-24s %#18llx                     %-14s %s  %s"
1430
1431@ MSG_REL_LDLV_TITLE_64	"         type                               \
1432			 offset              value  section / symbol"
1433
1434# dl*() family messages
1435
1436@ MSG_DL_IPHDR_ENTER	"dl_iterate_phdr() called from file=%s"
1437@ MSG_DL_IPHDR_MAPCNG	"dl_iterate_phdr() object map/unmap in callback"
1438@ MSG_DL_IPHDR_UNMAP	"dl_iterate_phdr() early return due to object unmap"
1439@ MSG_DL_IPHDR_CALLBACK	"dl_iterate_phdr() callback"
1440@ MSG_DL_IPHDR_NAME	"    dlpi_name:    %s"
1441@ MSG_DL_IPHDR_MAPCNT	"    dlpi_adds:    %-18llu   dlpi_subs:   %-18llu"
1442
1443@ MSG_DL_IPHDR_ADDR_32	"    dlpi_addr:    %#-10llx"
1444@ MSG_DL_IPHDR_PHDR_32	"    dlpi_phdr:    %#-10llx  dlpi_phnum:  %u"
1445
1446@ MSG_DL_IPHDR_ADDR_64	"    dlpi_addr:    %#-18llx"
1447@ MSG_DL_IPHDR_PHDR_64	"    dlpi_phdr:    %#-18llx   dlpi_phnum:  %u"
1448
1449@ MSG_DL_DLCLOSE	"file=%s;  dlclose() called from file=%s  %s"
1450@ MSG_DL_DLDUMP		"file=%s;  dldump() called from file=%s: dumping to \
1451			 file=%s  %s"
1452@ MSG_DL_DLOPEN		"file=%s;  dlopen() called from file=%s %s %s"
1453
1454@ MSG_DL_DLADDR		"dladdr() called from file=%s: %#llx"
1455@ MSG_DL_DLERROR	"dlerror() called from file=%s: %s"
1456@ MSG_DL_DLINFO		"dlinfo() called from file=%s: handle=%s, request=%s, \
1457			 user data=%#llx"
1458
1459@ _END_
1460
1461# Debug enabling tokens (for now these are untranslated)
1462
1463@ MSG_TOK_ALL		"all"
1464@ MSG_TOK_ARGS		"args"
1465@ MSG_TOK_BINDINGS	"bindings"
1466@ MSG_TOK_DL		"dl"
1467@ MSG_TOK_CAP		"cap"
1468@ MSG_TOK_BASIC		"basic"
1469@ MSG_TOK_ENTRY		"entry"
1470@ MSG_TOK_FILES		"files"
1471@ MSG_TOK_HELP		"help"
1472@ MSG_TOK_INIT		"init"
1473@ MSG_TOK_LIBS		"libs"
1474@ MSG_TOK_MAP		"map"
1475@ MSG_TOK_RELOC		"reloc"
1476@ MSG_TOK_SECTIONS	"sections"
1477@ MSG_TOK_SEGMENTS	"segments"
1478@ MSG_TOK_SUPPORT	"support"
1479@ MSG_TOK_SYMBOLS	"symbols"
1480@ MSG_TOK_TLS		"tls"
1481@ MSG_TOK_VERSIONS	"versions"
1482@ MSG_TOK_AUDIT		"audit"
1483@ MSG_TOK_GOT		"got"
1484@ MSG_TOK_MOVE		"move"
1485@ MSG_TOK_DEMANGLE	"demangle"
1486@ MSG_TOK_STRTAB	"strtab"
1487@ MSG_TOK_STATS		"statistics"
1488@ MSG_TOK_UNUSED	"unused"
1489
1490@ MSG_TOK_DETAIL	"detail"
1491@ MSG_TOK_LONG		"long"
1492@ MSG_TOK_NAME		"name"
1493@ MSG_TOK_FULLNAME	"fullname"
1494@ MSG_TOK_CLASS		"class"
1495@ MSG_TOK_LMID		"lmid"
1496@ MSG_TOK_TTIME		"ttime"
1497@ MSG_TOK_DTIME		"dtime"
1498
1499@ MSG_TOK_OUTFILE	"output"
1500
1501@ MSG_TOK_LMID_ALL	"ALL"
1502@ MSG_TOK_LMID_ALT	"ALT"
1503@ MSG_TOK_LMID_BASE	"BASE"
1504@ MSG_TOK_LMID_LDSO	"LDSO"
1505
1506
1507# The following strings represent reserved words, files, pathnames and symbols.
1508# Reference to this strings is via the MSG_ORIG() macro, and thus no message
1509# translation is required.
1510
1511@ MSG_STR_EMPTY		""
1512@ MSG_STR_DELIMIT	",:"
1513@ MSG_STR_COMDAT	"COMDAT "
1514
1515@ MSG_SCN_GOT		".got"
1516@ MSG_SCN_PLT		".plt"
1517@ MSG_SCN_BSS		".bss"
1518@ MSG_SCN_INIT		".init"
1519@ MSG_SCN_FINI		".fini"
1520@ MSG_SCN_INITARRAY	".initarray"
1521@ MSG_SCN_FINIARRAY	".finiarray"
1522@ MSG_SCN_PREINITARRAY	".preinitarray"
1523
1524@ MSG_SH_INFO		"sh_info"
1525@ MSG_SH_LINK		"sh_link"
1526
1527@ MSG_UTL_SCC_ENTRY	"    [%d]  %s"
1528
1529@ MSG_FMT_INDEX		" [%d]"
1530@ MSG_FMT_INDEX_RANGE	" [%d-%d]"
1531@ MSG_FMT_STR		"%s"
1532@ MSG_FMT_PATH		"%s/%s"
1533
1534@ MSG_PTH_OBJECT	"/tmp/ld.so-OBJECT-"
1535
1536@ MSG_SUNW_OST_SGS	"SUNW_OST_SGS"
1537
1538# Entrance criteria messages
1539
1540@ MSG_ECR_NAME		"  ec_name:       %s"
1541@ MSG_ECR_FLAGS		"  ec_flags:      %s"
1542@ MSG_ECR_IS_NAME	"  ec_is_name:    %-8s  ec_attrmask:  %s"
1543@ MSG_ECR_SEGMENT	"  ec_segment:    %-8s  ec_attrbits:  %s"
1544@ MSG_ECR_NDX		"  ec_ordndx:     %-8d  ec_type:      %s"
1545@ MSG_ECR_FILES		"  ec_files:"
1546@ MSG_ECR_FILE		"    %-21s  %s"
1547
1548@ MSG_MAP_SORT_SEG	"    %s"
1549@ MSG_MAP_SORT_SEG_NAME	"    %-20s  %s"
1550@ MSG_MAP_SORT_SEG_V	"    %-20s  %-20s  p_vaddr=0x%llx"
1551@ MSG_MAP_SORT_SEG_O	"    %-20s  %-20s  order=%d"
1552
1553# Libs messages
1554
1555@ MSG_LIB_FILE		"  %s"
1556
1557# PLT binding methods
1558
1559@ MSG_PLT_21D		"21d"
1560@ MSG_PLT_24D		"24d"
1561@ MSG_PLT_U32		"u32"
1562@ MSG_PLT_U44		"u44"
1563@ MSG_PLT_FULL		"full"
1564@ MSG_PLT_FAR		"far"
1565
1566# Segment messages
1567
1568@ MSG_SEG_DESC		"segment[%d]"
1569@ MSG_SEG_NAME		"    sg_name:      %s"
1570@ MSG_SEG_LENGTH	"    sg_length:    %#llx"
1571@ MSG_SEG_ROUND		"    sg_round:     %#llx"
1572@ MSG_SEG_ALIGN		"    sg_align:     %#llx"
1573@ MSG_SEG_FLAGS		"    sg_flags:     %s"
1574@ MSG_SEG_SIZESYM_TITLE	"    sg_sizesym:"
1575@ MSG_SEG_SIZESYM	"        %s"
1576@ MSG_SEG_IS_ORDER_TITLE "    sg_is_order:"
1577@ MSG_SEG_OS_ORDER_TITLE "    sg_os_order:"
1578@ MSG_SEG_LIST_ITEM	"        %s"
1579
1580# Section messages (used when expanding segment information)
1581
1582@ MSG_SEC_NAME		"  section[%d] os_name:  %s"
1583
1584# Symbol strings
1585
1586@ MSG_SYM_GLOBAL	"global"
1587@ MSG_SYM_LOCAL		"local"
1588@ MSG_SYM_COPY		"copy rel"
1589
1590@ MSG_DLSYM_NEXT	"[ RTLD_NEXT ]"
1591@ MSG_DLSYM_DEFAULT	"[ RTLD_DEFAULT ]"
1592@ MSG_DLSYM_SELF	"[ RTLD_SELF ]"
1593@ MSG_DLSYM_PROBE	"[ RTLD_PROBE ]"
1594@ MSG_DLSYM_SINGLETON	"( singleton reference )"
1595
1596# Link-map mode strings
1597
1598@ MSG_MODE_GLOBNODEL	"[ GLOBAL  NODELETE ]"
1599@ MSG_MODE_GLOB		"[ GLOBAL ]"
1600@ MSG_MODE_NODEL	"[ NODELETE ]"
1601
1602# NOTE: these are used by lari(1), use care when changing.
1603@ MSG_BINFO_START	"  ("
1604@ MSG_BINFO_DIRECT	"direct"
1605@ MSG_BINFO_INTERPOSE	"interpose"
1606@ MSG_BINFO_COPYREF	"copy-ref"
1607@ MSG_BINFO_FILTEE	"filtee"
1608@ MSG_BINFO_PLTADDR	"plt-addr"
1609@ MSG_BINFO_END		")"
1610@ MSG_BINFO_SEP		","
1611
1612# Utility messages
1613
1614@ MSG_UTL_EVNT_PREINIT	"RD_PREINIT"
1615@ MSG_UTL_EVNT_POSTINIT	"RD_POSTINIT"
1616@ MSG_UTL_EVNT_DLACT	"RD_DLACTIVITY"
1617
1618@ MSG_UTL_STA_ADD	"RT_ADD"
1619@ MSG_UTL_STA_DELETE	"RT_DELETE"
1620@ MSG_UTL_STA_CONSIST	"RT_CONSISTENT"
1621
1622# Version messages
1623
1624@ MSG_VER_SELECTED	"  SELECTED  %-26.26s  %s"
1625@ MSG_VER_L_SELECTED	"  SELECTED  %-26s  %s"
1626@ MSG_VER_ALL		"       ALL  %-26.26s"
1627@ MSG_VER_L_ALL		"       ALL  %-26s"
1628
1629# Global offset table entries.
1630
1631@ MSG_GOT_INDEX		" [%d]"
1632@ MSG_GOT_SMALL_PIC	"pic"
1633@ MSG_GOT_BIG_PIC	"PIC"
1634
1635@ MSG_CNTL_ENTRY	"   [0x%llx]  %s"
1636
1637@ MSG_STR_NL		"\n"
1638@ MSG_STR_LDVER		"Solaris Linkers: %s"
1639
1640@ MSG_FMT_INDEX		" [%d]"
1641@ MSG_FMT_ISEC_NAME	"[%u]%s"
1642
1643@ MSG_SUNW_OST_SGS	"SUNW_OST_SGS"
1644
1645@ MSG_ELF_MAGIC		"  ei_magic:   { 0x%x, %c, %c, %c }"
1646@ MSG_ELF_CLASS		"  ei_class:   %-18s  ei_data:       %s"
1647@ MSG_ELF_OSABI		"  ei_osabi:   %-18s  ei_abiversion: %s"
1648@ MSG_ELF_MACHINE	"  e_machine:  %-18s  e_version:     %s"
1649@ MSG_ELF_TYPE		"  e_type:     %s"
1650@ MSG_ELF_FLAGS		"  e_flags:    %18s"
1651@ MSG_ELF_FLAGS_FMT	"  e_flags:    %s"
1652@ MSG_ELF_ESIZE		"  e_entry:    %#18llx  e_ehsize:     %2d  \
1653			 e_shstrndx:  %d"
1654@ MSG_ELFX_ESIZE	"  e_entry:    %#18llx  e_ehsize:     %2d  \
1655			 e_shstrndx:  SHN_XINDEX  (see shdr[0].sh_link)"
1656@ MSG_ELF_SHOFF		"  e_shoff:    %#18llx  e_shentsize:  %2d  \
1657			 e_shnum:     %d"
1658@ MSG_ELFX_SHOFF	"  e_shoff:    %#18llx  e_shentsize:  %2d  \
1659			 e_shnum:     0  (see shdr[0].sh_size)"
1660@ MSG_ELF_PHOFF		"  e_phoff:    %#18llx  e_phentsize:  %2d  \
1661			 e_phnum:     %d"
1662@ MSG_ELFX_PHOFF	"  e_phoff:    %#18llx  e_phentsize:  %2d  \
1663			 e_phnum:     PN_XNUM  (see shdr[0].sh_info)"
1664
1665# Shdr[0] messages
1666
1667@ MSG_SHD0_TITLE	"Section Header[0]:  (ELF Ehdr extensions)"
1668@ MSG_SHD0_ADDR		"    sh_addr:      %-6lld               sh_flags:   %s"
1669@ MSG_SHD0_SIZE		"    sh_size:      %-6lld (e_shnum)     sh_type:    %s"
1670@ MSG_SHD0_OFFSET	"    sh_offset:    %-6lld               \
1671			 sh_entsize: %lld"
1672@ MSG_SHD0_LINK		"    sh_link:      %-6d (e_shstrndx)  sh_info:    \
1673			 %d (e_phnum)"
1674@ MSG_SHD0_ALIGN	"    sh_addralign: %-6lld"
1675
1676# Section header messages
1677
1678@ MSG_SHD_ADDR_32	"    sh_addr:      %#-10llx      sh_flags:   %s"
1679@ MSG_SHD_SIZE_32	"    sh_size:      %#-10llx      sh_type:    %s"
1680@ MSG_SHD_OFFSET_32	"    sh_offset:    %#-10llx      sh_entsize: %#llx"
1681@ MSG_SHD_OFFSET_ENT_32	"    sh_offset:    %#-10llx      sh_entsize: %#llx \
1682			 (%lld %s)"
1683@ MSG_SHD_LINK_32	"    sh_link:      %-14s  sh_info:    %s"
1684@ MSG_SHD_ALIGN_32	"    sh_addralign: %#-10llx"
1685
1686@ MSG_SHD_ADDR_64	"    sh_addr:      %#-18llx  sh_flags:   %s"
1687@ MSG_SHD_SIZE_64	"    sh_size:      %#-18llx  sh_type:    %s"
1688@ MSG_SHD_OFFSET_64	"    sh_offset:    %#-18llx  sh_entsize: %#llx"
1689@ MSG_SHD_OFFSET_ENT_64	"    sh_offset:    %#-18llx  sh_entsize: %#llx \
1690			 (%lld %s)"
1691@ MSG_SHD_LINK_64	"    sh_link:      %-18s  sh_info:    %s"
1692@ MSG_SHD_ALIGN_64	"    sh_addralign: %#-18llx"
1693
1694# Program header messages
1695
1696@ MSG_PHD_VADDR_32	"    p_vaddr:      %#-10llx  p_flags:    %s"
1697@ MSG_PHD_PADDR_32	"    p_paddr:      %#-10llx  p_type:     %s"
1698@ MSG_PHD_FILESZ_32	"    p_filesz:     %#-10llx  p_memsz:    %#llx"
1699@ MSG_PHD_OFFSET_32	"    p_offset:     %#-10llx  p_align:    %#llx"
1700
1701@ MSG_PHD_VADDR_64	"    p_vaddr:      %#-18llx  p_flags:    %s"
1702@ MSG_PHD_PADDR_64	"    p_paddr:      %#-18llx  p_type:     %s"
1703@ MSG_PHD_FILESZ_64	"    p_filesz:     %#-18llx  p_memsz:    %#llx"
1704@ MSG_PHD_OFFSET_64	"    p_offset:     %#-18llx  p_align:    %#llx"
1705
1706# Syminfo formats
1707
1708@ MSG_SYMINFO_UNKFLAG	"[0x%x]"
1709
1710# Lc_interface interface tags.
1711
1712@ MSG_CI_NULL		"NULL"
1713@ MSG_CI_VERSION	"VERSION"
1714@ MSG_CI_ATEXIT		"ATEXIT"
1715@ MSG_CI_LCMESSAGES	"LCMESSAGES"
1716@ MSG_CI_BIND_GUARD	"BIND_GUARD"
1717@ MSG_CI_BIND_CLEAR	"BIND_CLEAR"
1718@ MSG_CI_THR_SELF	"THR_SELF"
1719@ MSG_CI_TLS_MODADD	"TLS_MODADD"
1720@ MSG_CI_TLS_MODREM	"TLS_MODREM"
1721@ MSG_CI_TLS_STATMOD	"TLS_STATMOD"
1722@ MSG_CI_THRINIT	"THRINIT"
1723@ MSG_CI_CRITICAL	"CRITICAL"
1724
1725# TLS information flags
1726
1727@ MSG_TLS_FLAG_STATIC	"STATIC-TLS"
1728
1729# mmapobj() mr_flags.
1730
1731@ MSG_MR_PADDING	"[ PADDING ]"
1732@ MSG_MR_HDR_ELF	"[ HDR_ELF ]"
1733@ MSG_MR_HDR_AOUT	"[ HDR_AOUT ]"
1734