1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
24 */
25
26 /*
27 * rcapd is a long-running daemon enforcing project-based resource caps (see
28 * rcapd(8)). Each instance of a process aggregate (project or, generically,
29 * "collection") may have a memory cap. A single thread monitors the resource
30 * utilization of capped collections, enforces caps when they are exceeded (and
31 * other conditions are met), and incorporates changes in configuration or
32 * caps. Each of these actions occurs not more frequently than the rate
33 * specified with rcapadm(8).
34 */
35
36 #include <sys/priocntl.h>
37 #include <sys/proc.h>
38 #include <sys/resource.h>
39 #include <sys/sysinfo.h>
40 #include <sys/stat.h>
41 #include <sys/sysmacros.h>
42 #include <sys/time.h>
43 #include <sys/types.h>
44 #include <dirent.h>
45 #include <errno.h>
46 #include <fcntl.h>
47 #include <kstat.h>
48 #include <libintl.h>
49 #include <limits.h>
50 #include <locale.h>
51 #include <priv.h>
52 #include <signal.h>
53 #include <stdarg.h>
54 #include <stdio.h>
55 #include <stdio_ext.h>
56 #include <stdlib.h>
57 #include <libscf.h>
58 #include <strings.h>
59 #include <time.h>
60 #include <unistd.h>
61 #include <zone.h>
62 #include <assert.h>
63 #include <sys/vm_usage.h>
64 #include "rcapd.h"
65 #include "rcapd_mapping.h"
66 #include "rcapd_rfd.h"
67 #include "rcapd_stat.h"
68 #include "utils.h"
69
70 #define POSITIVE_MIN(x, y) \
71 (((x) <= 0) ? (y) : ((y) <= 0) ? (x) : MIN(x, y))
72 #define NEXT_EVENT_TIME(base, seconds) \
73 (((int)seconds > 0) ? (base + (hrtime_t)seconds * (hrtime_t)NANOSEC) \
74 : (hrtime_t)0)
75 #define NEXT_REPORT_EVENT_TIME(base, seconds) \
76 ((rcfg.rcfg_stat_file[0] != 0) ? \
77 NEXT_EVENT_TIME(gethrtime(), seconds) : (hrtime_t)0)
78 #define EVENT_TIME(time, eventtime) \
79 (((time) > (eventtime)) && (eventtime) != 0)
80 #define STAT_TEMPLATE_SUFFIX ".XXXXXX" /* suffix of mkstemp() arg */
81 #define DAEMON_UID 1 /* uid to use */
82
83 #define CAPPED_PROJECT 0x01
84 #define CAPPED_ZONE 0x02
85
86 typedef struct soft_scan_arg {
87 uint64_t ssa_sum_excess;
88 int64_t ssa_scan_goal;
89 boolean_t ssa_project_over_cap;
90 } soft_scan_arg_t;
91
92 typedef struct sample_col_arg {
93 boolean_t sca_any_over_cap;
94 boolean_t sca_project_over_cap;
95 } sample_col_arg_t;
96
97
98 static int debug_mode = 0; /* debug mode flag */
99 static pid_t rcapd_pid; /* rcapd's pid to ensure it's not */
100 /* scanned */
101 static kstat_ctl_t *kctl; /* kstat chain */
102 static int memory_pressure = 0; /* physical memory utilization (%) */
103 static int memory_pressure_sample = 0; /* count of samples */
104 static long page_size_kb = 0; /* system page size in KB */
105 static size_t nvmu_vals = 0; /* # of kernel RSS/swap vals in array */
106 static size_t vmu_vals_len = 0; /* size of RSS/swap vals array */
107 static vmusage_t *vmu_vals = NULL; /* snapshot of kernel RSS/swap values */
108 static hrtime_t next_report; /* time of next report */
109 static int termination_signal = 0; /* terminating signal */
110 static zoneid_t my_zoneid = (zoneid_t)-1;
111 static lcollection_t *gz_col; /* global zone collection */
112
113 rcfg_t rcfg;
114 /*
115 * Updated when we re-read the collection configurations if this rcapd instance
116 * is running in the global zone and the global zone is capped.
117 */
118 boolean_t gz_capped = B_FALSE;
119
120 /*
121 * Flags.
122 */
123 static int ever_ran;
124 int should_run;
125 static int should_reconfigure;
126
127 static int verify_statistics(void);
128 static int update_statistics(void);
129
130 /*
131 * Checks if a process is marked 'system'. Returns FALSE only when it is not.
132 */
133 static boolean_t
proc_issystem(pid_t pid)134 proc_issystem(pid_t pid)
135 {
136 char pc_clname[PC_CLNMSZ];
137
138 if (priocntl(P_PID, pid, PC_GETXPARMS, NULL, PC_KY_CLNAME, pc_clname,
139 PC_KY_NULL) != -1) {
140 return (strcmp(pc_clname, "SYS") == 0);
141 } else {
142 debug("cannot get class-specific scheduling parameters; "
143 "assuming system process\n");
144 return (B_TRUE);
145 }
146 }
147
148 static void
lprocess_insert_mark(psinfo_t * psinfop)149 lprocess_insert_mark(psinfo_t *psinfop)
150 {
151 pid_t pid = psinfop->pr_pid;
152 /* flag indicating whether the process should be scanned. */
153 int unscannable = psinfop->pr_nlwp == 0;
154 rcid_t colid;
155 lcollection_t *lcol;
156 lprocess_t *lproc;
157
158 /*
159 * Determine which collection to put this process into. We only have
160 * to worry about tracking both zone and project capped processes if
161 * this rcapd instance is running in the global zone, since we'll only
162 * see processes in our own projects in a non-global zone. In the
163 * global zone, if the process belongs to a non-global zone, we only
164 * need to track it for the capped non-global zone collection. For
165 * global zone processes, we first attempt to put the process into a
166 * capped project collection. On the second pass into this function
167 * the projid will be cleared so we will just track the process for the
168 * global zone collection as a whole.
169 */
170 if (psinfop->pr_zoneid == my_zoneid && psinfop->pr_projid != -1) {
171 colid.rcid_type = RCIDT_PROJECT;
172 colid.rcid_val = psinfop->pr_projid;
173 } else {
174 /* try to add to zone collection */
175 colid.rcid_type = RCIDT_ZONE;
176 colid.rcid_val = psinfop->pr_zoneid;
177 }
178
179 if ((lcol = lcollection_find(&colid)) == NULL)
180 return;
181
182 /*
183 * If the process is already being tracked, update the unscannable flag,
184 * as determined by the caller, from the process's psinfo.
185 */
186 lproc = lcol->lcol_lprocess;
187 while (lproc != NULL) {
188 if (lproc->lpc_pid == pid) {
189 lproc->lpc_mark = 1;
190 if (unscannable != 0 && lproc->lpc_unscannable == 0) {
191 debug("process %d: became unscannable\n",
192 (int)lproc->lpc_pid);
193 lproc->lpc_unscannable = 1;
194 }
195 return;
196 }
197 lproc = lproc->lpc_next;
198 }
199
200 /*
201 * We've fallen off the list without finding our current process;
202 * insert it at the list head.
203 */
204 if ((lproc = malloc(sizeof (*lproc))) == NULL)
205 debug("insufficient memory to track new process %d", (int)pid);
206 else {
207 (void) bzero(lproc, sizeof (*lproc));
208 lproc->lpc_pid = pid;
209 lproc->lpc_mark = 1;
210 lproc->lpc_collection = lcol;
211 lproc->lpc_psinfo_fd = -1;
212 lproc->lpc_pgdata_fd = -1;
213 lproc->lpc_xmap_fd = -1;
214
215 /*
216 * If the caller didn't flag this process as unscannable
217 * already, do some more checking.
218 */
219 lproc->lpc_unscannable = unscannable || proc_issystem(pid);
220
221 #ifdef DEBUG
222 /*
223 * Verify the sanity of lprocess. It should not contain the
224 * process we are about to prepend.
225 */
226 if (lcollection_member(lcol, lproc)) {
227 lprocess_t *cur = lcol->lcol_lprocess;
228 debug("The collection %lld already has these members, "
229 "including me, %d!\n",
230 (long long)lcol->lcol_id.rcid_val,
231 (int)lproc->lpc_pid);
232 while (cur != NULL) {
233 debug("\t%d\n", (int)cur->lpc_pid);
234 cur = cur->lpc_next;
235 }
236 info(gettext("process already on lprocess\n"));
237 abort();
238 }
239 #endif /* DEBUG */
240 lproc->lpc_next = lcol->lcol_lprocess;
241 if (lproc->lpc_next != NULL)
242 lproc->lpc_next->lpc_prev = lproc;
243 lproc->lpc_prev = NULL;
244 lcol->lcol_lprocess = lproc;
245
246 debug("tracking %s %ld %d %s%s\n",
247 (colid.rcid_type == RCIDT_PROJECT ? "project" : "zone"),
248 (long)colid.rcid_val,
249 (int)pid, psinfop->pr_psargs,
250 (lproc->lpc_unscannable != 0) ? " (not scannable)" : "");
251 lcol->lcol_stat.lcols_proc_in++;
252 }
253 }
254
255 static int
list_walk_process_cb(lcollection_t * lcol,void * arg)256 list_walk_process_cb(lcollection_t *lcol, void *arg)
257 {
258 int (*cb)(lcollection_t *, lprocess_t *) =
259 (int(*)(lcollection_t *, lprocess_t *))arg;
260 lprocess_t *member;
261 lprocess_t *next;
262
263 member = lcol->lcol_lprocess;
264 while (member != NULL) {
265 pid_t pid = member->lpc_pid;
266 next = member->lpc_next;
267
268 debug_high("list_walk_all lpc %d\n", (int)pid);
269 if (cb(lcol, member) != 0) {
270 debug_high("list_walk_all aborted at lpc %d\n",
271 (int)pid);
272 return (1);
273 }
274 member = next;
275 }
276
277 return (0);
278 }
279
280 /*
281 * Invoke the given callback for each process in each collection. Callbacks
282 * are allowed to change the linkage of the process on which they act.
283 */
284 static void
list_walk_all(int (* cb)(lcollection_t *,lprocess_t *))285 list_walk_all(int (*cb)(lcollection_t *, lprocess_t *))
286 {
287 list_walk_collection(list_walk_process_cb, (void *)cb);
288 }
289
290 static void
revoke_psinfo(rfd_t * rfd)291 revoke_psinfo(rfd_t *rfd)
292 {
293 lprocess_t *lpc = (lprocess_t *)rfd->rfd_data;
294
295 if (lpc != NULL) {
296 debug("revoking psinfo fd for process %d\n", (int)lpc->lpc_pid);
297 ASSERT(lpc->lpc_psinfo_fd != -1);
298 lpc->lpc_psinfo_fd = -1;
299 } else
300 debug("revoking psinfo fd for unknown process\n");
301 }
302
303 /*
304 * Retrieve a process's psinfo via an already-opened or new file descriptor.
305 * The supplied descriptor will be closed on failure. An optional callback
306 * will be invoked with the last descriptor tried, and a supplied callback
307 * argument, as its arguments, such that the new descriptor may be cached, or
308 * an old one may be invalidated. If the result of the callback is zero, the
309 * the caller is to assume responsibility for the file descriptor, to close it
310 * with rfd_close().
311 *
312 * On failure, a nonzero value is returned.
313 */
314 int
get_psinfo(pid_t pid,psinfo_t * psinfo,int cached_fd,int (* fd_update_cb)(void *,int),void * arg,lprocess_t * lpc)315 get_psinfo(pid_t pid, psinfo_t *psinfo, int cached_fd,
316 int(*fd_update_cb)(void *, int), void *arg, lprocess_t *lpc)
317 {
318 int fd;
319 int can_try_uncached;
320
321 ASSERT(!(cached_fd > 0 && fd_update_cb == NULL));
322
323 do {
324 if (cached_fd >= 0) {
325 fd = cached_fd;
326 can_try_uncached = 1;
327 debug_high("%d/psinfo, trying cached fd %d\n",
328 (int)pid, fd);
329 } else {
330 char pathbuf[PROC_PATH_MAX];
331
332 can_try_uncached = 0;
333 (void) snprintf(pathbuf, sizeof (pathbuf),
334 "/proc/%d/psinfo", (int)pid);
335 if ((fd = rfd_open(pathbuf, 1, RFD_PSINFO,
336 revoke_psinfo, lpc, O_RDONLY, 0000)) < 0) {
337 debug("cannot open %s", pathbuf);
338 break;
339 } else
340 debug_high("opened %s, fd %d\n", pathbuf, fd);
341 }
342
343 if (pread(fd, psinfo, sizeof (*psinfo), 0) ==
344 sizeof (*psinfo) && psinfo->pr_pid == pid)
345 break;
346 else {
347 debug_high("closed fd %d\n", fd);
348 if (rfd_close(fd) != 0)
349 debug("could not close fd %d", fd);
350 fd = cached_fd = -1;
351 }
352 } while (can_try_uncached == 1);
353
354 if (fd_update_cb == NULL || fd_update_cb(arg, fd) != 0)
355 if (fd >= 0) {
356 debug_high("closed %s fd %d\n", fd_update_cb == NULL ?
357 "uncached" : "cached", fd);
358 if (rfd_close(fd) != 0)
359 debug("could not close fd %d", fd);
360 }
361
362 debug_high("get_psinfo ret %d, fd %d, %s\n", ((fd >= 0) ? 0 : -1), fd,
363 fd_update_cb != NULL ? "cached" : "uncached");
364 return ((fd >= 0) ? 0 : -1);
365 }
366
367 /*
368 * Retrieve the collection membership of all processes and update the psinfo of
369 * those non-system, non-zombie ones in collections. For global zone processes,
370 * we first attempt to put the process into a capped project collection. We
371 * also want to track the process for the global zone collection as a whole.
372 */
373 static void
proc_cb(const pid_t pid)374 proc_cb(const pid_t pid)
375 {
376 psinfo_t psinfo;
377
378 if (get_psinfo(pid, &psinfo, -1, NULL, NULL, NULL) == 0) {
379 lprocess_insert_mark(&psinfo);
380 if (gz_capped && psinfo.pr_zoneid == GLOBAL_ZONEID) {
381 /*
382 * We also want to track this process for the global
383 * zone as a whole so add it to the global zone
384 * collection as well.
385 */
386 psinfo.pr_projid = -1;
387 lprocess_insert_mark(&psinfo);
388 }
389 }
390 }
391
392 /*
393 * Cache the process' psinfo fd, taking responsibility for freeing it.
394 */
395 int
lprocess_update_psinfo_fd_cb(void * arg,int fd)396 lprocess_update_psinfo_fd_cb(void *arg, int fd)
397 {
398 lprocess_t *lpc = arg;
399
400 lpc->lpc_psinfo_fd = fd;
401 return (0);
402 }
403
404 /*
405 * Get the system pagesize.
406 */
407 static void
get_page_size(void)408 get_page_size(void)
409 {
410 page_size_kb = sysconf(_SC_PAGESIZE) / 1024;
411 debug("physical page size: %luKB\n", page_size_kb);
412 }
413
414 static void
tm_fmt(char * msg,hrtime_t t1,hrtime_t t2)415 tm_fmt(char *msg, hrtime_t t1, hrtime_t t2)
416 {
417 hrtime_t diff = t2 - t1;
418
419 if (diff < MILLISEC)
420 debug("%s: %lld nanoseconds\n", msg, diff);
421 else if (diff < MICROSEC)
422 debug("%s: %.2f microseconds\n", msg, (float)diff / MILLISEC);
423 else if (diff < NANOSEC)
424 debug("%s: %.2f milliseconds\n", msg, (float)diff / MICROSEC);
425 else
426 debug("%s: %.2f seconds\n", msg, (float)diff / NANOSEC);
427 }
428
429 /*
430 * Get the zone's & project's RSS from the kernel.
431 */
432 static void
rss_sample(boolean_t my_zone_only,uint_t col_types)433 rss_sample(boolean_t my_zone_only, uint_t col_types)
434 {
435 size_t nres;
436 size_t i;
437 uint_t flags;
438 hrtime_t t1, t2;
439
440 if (my_zone_only) {
441 flags = VMUSAGE_ZONE;
442 } else {
443 flags = 0;
444 if (col_types & CAPPED_PROJECT)
445 flags |= VMUSAGE_PROJECTS;
446 if (col_types & CAPPED_ZONE && my_zoneid == GLOBAL_ZONEID)
447 flags |= VMUSAGE_ALL_ZONES;
448 }
449
450 debug("vmusage sample flags 0x%x\n", flags);
451 if (flags == 0)
452 return;
453
454 again:
455 /* try the current buffer to see if the list will fit */
456 nres = vmu_vals_len;
457 t1 = gethrtime();
458 if (getvmusage(flags, my_zone_only ? 0 : rcfg.rcfg_rss_sample_interval,
459 vmu_vals, &nres) != 0) {
460 if (errno != EOVERFLOW) {
461 warn(gettext("can't read RSS from kernel\n"));
462 return;
463 }
464 }
465 t2 = gethrtime();
466 tm_fmt("getvmusage time", t1, t2);
467
468 debug("kernel nres %lu\n", (ulong_t)nres);
469
470 if (nres > vmu_vals_len) {
471 /* array size is now too small, increase it and try again */
472 free(vmu_vals);
473
474 if ((vmu_vals = (vmusage_t *)calloc(nres,
475 sizeof (vmusage_t))) == NULL) {
476 warn(gettext("out of memory: could not read RSS from "
477 "kernel\n"));
478 vmu_vals_len = nvmu_vals = 0;
479 return;
480 }
481 vmu_vals_len = nres;
482 goto again;
483 }
484
485 nvmu_vals = nres;
486
487 debug("vmusage_sample\n");
488 for (i = 0; i < nvmu_vals; i++) {
489 debug("%d: id: %d, type: 0x%x, rss_all: %llu (%lluKB), "
490 "swap: %llu\n", (int)i, (int)vmu_vals[i].vmu_id,
491 vmu_vals[i].vmu_type,
492 (unsigned long long)vmu_vals[i].vmu_rss_all,
493 (unsigned long long)vmu_vals[i].vmu_rss_all / 1024,
494 (unsigned long long)vmu_vals[i].vmu_swap_all);
495 }
496 }
497
498 static void
update_col_rss(lcollection_t * lcol)499 update_col_rss(lcollection_t *lcol)
500 {
501 int i;
502
503 lcol->lcol_rss = 0;
504 lcol->lcol_image_size = 0;
505
506 for (i = 0; i < nvmu_vals; i++) {
507 if (vmu_vals[i].vmu_id != lcol->lcol_id.rcid_val)
508 continue;
509
510 if (vmu_vals[i].vmu_type == VMUSAGE_ZONE &&
511 lcol->lcol_id.rcid_type != RCIDT_ZONE)
512 continue;
513
514 if (vmu_vals[i].vmu_type == VMUSAGE_PROJECTS &&
515 lcol->lcol_id.rcid_type != RCIDT_PROJECT)
516 continue;
517
518 /* we found the right RSS entry, update the collection vals */
519 lcol->lcol_rss = vmu_vals[i].vmu_rss_all / 1024;
520 lcol->lcol_image_size = vmu_vals[i].vmu_swap_all / 1024;
521 break;
522 }
523 }
524
525 /*
526 * Sample the collection RSS, updating the collection's statistics with the
527 * results. Also, sum the rss of all capped projects & return true if
528 * the collection is over cap.
529 */
530 static int
rss_sample_col_cb(lcollection_t * lcol,void * arg)531 rss_sample_col_cb(lcollection_t *lcol, void *arg)
532 {
533 int64_t excess;
534 uint64_t rss;
535 sample_col_arg_t *col_argp = (sample_col_arg_t *)arg;
536
537 update_col_rss(lcol);
538
539 lcol->lcol_stat.lcols_rss_sample++;
540 rss = lcol->lcol_rss;
541 excess = rss - lcol->lcol_rss_cap;
542 if (excess > 0) {
543 lcol->lcol_stat.lcols_rss_act_sum += rss;
544 col_argp->sca_any_over_cap = B_TRUE;
545 if (lcol->lcol_id.rcid_type == RCIDT_PROJECT)
546 col_argp->sca_project_over_cap = B_TRUE;
547 }
548 lcol->lcol_stat.lcols_rss_sum += rss;
549
550 if (lcol->lcol_stat.lcols_min_rss > rss)
551 lcol->lcol_stat.lcols_min_rss = rss;
552 if (lcol->lcol_stat.lcols_max_rss < rss)
553 lcol->lcol_stat.lcols_max_rss = rss;
554
555 return (0);
556 }
557
558 /*
559 * Determine if we have capped projects, capped zones or both.
560 */
561 static int
col_type_cb(lcollection_t * lcol,void * arg)562 col_type_cb(lcollection_t *lcol, void *arg)
563 {
564 uint_t *col_type = (uint_t *)arg;
565
566 /* skip uncapped collections */
567 if (lcol->lcol_rss_cap == 0)
568 return (1);
569
570 if (lcol->lcol_id.rcid_type == RCIDT_PROJECT)
571 *col_type |= CAPPED_PROJECT;
572 else
573 *col_type |= CAPPED_ZONE;
574
575 /* once we know everything is capped, we can stop looking */
576 if ((*col_type & CAPPED_ZONE) && (*col_type & CAPPED_PROJECT))
577 return (1);
578
579 return (0);
580 }
581
582 /*
583 * Open /proc and walk entries.
584 */
585 static void
proc_walk_all(void (* cb)(const pid_t))586 proc_walk_all(void (*cb)(const pid_t))
587 {
588 DIR *pdir;
589 struct dirent *dirent;
590 pid_t pid;
591
592 (void) rfd_reserve(1);
593 if ((pdir = opendir("/proc")) == NULL)
594 die(gettext("couldn't open /proc!"));
595
596 while ((dirent = readdir(pdir)) != NULL) {
597 if (strcmp(".", dirent->d_name) == 0 ||
598 strcmp("..", dirent->d_name) == 0)
599 continue;
600 pid = atoi(dirent->d_name);
601 ASSERT(pid != 0 || strcmp(dirent->d_name, "0") == 0);
602 if (pid == rcapd_pid)
603 continue;
604 else
605 cb(pid);
606 }
607 (void) closedir(pdir);
608 }
609
610 /*
611 * Clear unmarked callback.
612 */
613 /*ARGSUSED*/
614 static int
sweep_process_cb(lcollection_t * lcol,lprocess_t * lpc)615 sweep_process_cb(lcollection_t *lcol, lprocess_t *lpc)
616 {
617 if (lpc->lpc_mark) {
618 lpc->lpc_mark = 0;
619 } else {
620 debug("process %d finished\n", (int)lpc->lpc_pid);
621 lprocess_free(lpc);
622 }
623
624 return (0);
625 }
626
627 /*
628 * Print, for debugging purposes, a collection's recently-sampled RSS and
629 * excess.
630 */
631 /*ARGSUSED*/
632 static int
excess_print_cb(lcollection_t * lcol,void * arg)633 excess_print_cb(lcollection_t *lcol, void *arg)
634 {
635 int64_t excess = lcol->lcol_rss - lcol->lcol_rss_cap;
636
637 debug("%s %s rss/cap: %llu/%llu, excess = %lld kB\n",
638 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ? "project" : "zone"),
639 lcol->lcol_name,
640 (unsigned long long)lcol->lcol_rss,
641 (unsigned long long)lcol->lcol_rss_cap,
642 (long long)excess);
643
644 return (0);
645 }
646
647 /*
648 * Scan those collections which have exceeded their caps.
649 *
650 * If we're running in the global zone it might have a cap. We don't want to
651 * do any capping for the global zone yet since we might get under the cap by
652 * just capping the projects in the global zone.
653 */
654 /*ARGSUSED*/
655 static int
scan_cb(lcollection_t * lcol,void * arg)656 scan_cb(lcollection_t *lcol, void *arg)
657 {
658 int64_t excess;
659
660 /* skip over global zone collection for now but keep track for later */
661 if (lcol->lcol_id.rcid_type == RCIDT_ZONE &&
662 lcol->lcol_id.rcid_val == GLOBAL_ZONEID) {
663 gz_col = lcol;
664 return (0);
665 }
666
667 if ((excess = lcol->lcol_rss - lcol->lcol_rss_cap) > 0) {
668 scan(lcol, excess);
669 lcol->lcol_stat.lcols_scan++;
670 }
671
672 return (0);
673 }
674
675 /*
676 * Scan the global zone collection and see if it still exceeds its cap.
677 * We take into account the effects of capping any global zone projects here.
678 */
679 static void
scan_gz(lcollection_t * lcol,boolean_t project_over_cap)680 scan_gz(lcollection_t *lcol, boolean_t project_over_cap)
681 {
682 int64_t excess;
683
684 /*
685 * If we had projects over their cap and the global zone was also over
686 * its cap then we need to get the up-to-date global zone rss to
687 * determine if we are still over the global zone cap. We might have
688 * gone under while we scanned the capped projects. If there were no
689 * projects over cap then we can use the rss value we already have for
690 * the global zone.
691 */
692 excess = lcol->lcol_rss - lcol->lcol_rss_cap;
693 if (project_over_cap && excess > 0) {
694 rss_sample(B_TRUE, CAPPED_ZONE);
695 update_col_rss(lcol);
696 excess = lcol->lcol_rss - lcol->lcol_rss_cap;
697 }
698
699 if (excess > 0) {
700 debug("global zone excess %lldKB\n", (long long)excess);
701 scan(lcol, excess);
702 lcol->lcol_stat.lcols_scan++;
703 }
704 }
705
706 /*
707 * Do a soft scan of those collections which have excesses. A soft scan is one
708 * in which the cap enforcement pressure is taken into account. The difference
709 * between the utilized physical memory and the cap enforcement pressure will
710 * be scanned-for, and each collection will be scanned proportionally by their
711 * present excesses.
712 */
713 static int
soft_scan_cb(lcollection_t * lcol,void * a)714 soft_scan_cb(lcollection_t *lcol, void *a)
715 {
716 int64_t excess;
717 soft_scan_arg_t *arg = a;
718
719 /* skip over global zone collection for now but keep track for later */
720 if (lcol->lcol_id.rcid_type == RCIDT_ZONE &&
721 lcol->lcol_id.rcid_val == GLOBAL_ZONEID) {
722 gz_col = lcol;
723 return (0);
724 }
725
726 if ((excess = lcol->lcol_rss - lcol->lcol_rss_cap) > 0) {
727 int64_t adjusted_excess =
728 excess * arg->ssa_scan_goal / arg->ssa_sum_excess;
729
730 debug("%s %ld excess %lld scan_goal %lld sum_excess %llu, "
731 "scanning %lld\n",
732 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ?
733 "project" : "zone"),
734 (long)lcol->lcol_id.rcid_val,
735 (long long)excess, (long long)arg->ssa_scan_goal,
736 (unsigned long long)arg->ssa_sum_excess,
737 (long long)adjusted_excess);
738
739 scan(lcol, adjusted_excess);
740 lcol->lcol_stat.lcols_scan++;
741 }
742
743 return (0);
744 }
745
746 static void
soft_scan_gz(lcollection_t * lcol,void * a)747 soft_scan_gz(lcollection_t *lcol, void *a)
748 {
749 int64_t excess;
750 soft_scan_arg_t *arg = a;
751
752 /*
753 * If we had projects over their cap and the global zone was also over
754 * its cap then we need to get the up-to-date global zone rss to
755 * determine if we are still over the global zone cap. We might have
756 * gone under while we scanned the capped projects. If there were no
757 * projects over cap then we can use the rss value we already have for
758 * the global zone.
759 */
760 excess = lcol->lcol_rss - lcol->lcol_rss_cap;
761 if (arg->ssa_project_over_cap && excess > 0) {
762 rss_sample(B_TRUE, CAPPED_ZONE);
763 update_col_rss(lcol);
764 excess = lcol->lcol_rss - lcol->lcol_rss_cap;
765 }
766
767 if (excess > 0) {
768 int64_t adjusted_excess =
769 excess * arg->ssa_scan_goal / arg->ssa_sum_excess;
770
771 debug("%s %ld excess %lld scan_goal %lld sum_excess %llu, "
772 "scanning %lld\n",
773 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ?
774 "project" : "zone"),
775 (long)lcol->lcol_id.rcid_val,
776 (long long)excess, (long long)arg->ssa_scan_goal,
777 (unsigned long long)arg->ssa_sum_excess,
778 (long long)adjusted_excess);
779
780 scan(lcol, adjusted_excess);
781 lcol->lcol_stat.lcols_scan++;
782 }
783 }
784
785 /*
786 * When a scan could happen, but caps aren't enforced tick the
787 * lcols_unenforced_cap counter.
788 */
789 /*ARGSUSED*/
790 static int
unenforced_cap_cb(lcollection_t * lcol,void * arg)791 unenforced_cap_cb(lcollection_t *lcol, void *arg)
792 {
793 lcol->lcol_stat.lcols_unenforced_cap++;
794
795 return (0);
796 }
797
798 /*
799 * Update the count of physically installed memory.
800 */
801 static void
update_phys_total(void)802 update_phys_total(void)
803 {
804 uint64_t old_phys_total;
805
806 old_phys_total = phys_total;
807 phys_total = (uint64_t)sysconf(_SC_PHYS_PAGES) * page_size_kb;
808 if (phys_total != old_phys_total)
809 debug("physical memory%s: %lluM\n", (old_phys_total == 0 ?
810 "" : " adjusted"), (unsigned long long)(phys_total / 1024));
811 }
812
813 /*
814 * Unlink a process from its collection, updating relevant statistics, and
815 * freeing its associated memory.
816 */
817 void
lprocess_free(lprocess_t * lpc)818 lprocess_free(lprocess_t *lpc)
819 {
820 pid_t pid;
821
822 lpc->lpc_collection->lcol_stat.lcols_proc_out++;
823
824 if (lpc->lpc_prev != NULL)
825 lpc->lpc_prev->lpc_next = lpc->lpc_next;
826 if (lpc->lpc_next != NULL)
827 lpc->lpc_next->lpc_prev = lpc->lpc_prev;
828 if (lpc->lpc_collection->lcol_lprocess == lpc)
829 lpc->lpc_collection->lcol_lprocess = (lpc->lpc_next !=
830 lpc ? lpc->lpc_next : NULL);
831 lpc->lpc_next = lpc->lpc_prev = NULL;
832
833 if (lpc->lpc_prpageheader != NULL)
834 free(lpc->lpc_prpageheader);
835 if (lpc->lpc_xmap != NULL)
836 free(lpc->lpc_xmap);
837 if (lpc->lpc_psinfo_fd >= 0) {
838 if (rfd_close(lpc->lpc_psinfo_fd) != 0)
839 debug("could not close %d lpc_psinfo_fd %d",
840 (int)lpc->lpc_pid, lpc->lpc_psinfo_fd);
841 lpc->lpc_psinfo_fd = -1;
842 }
843 if (lpc->lpc_pgdata_fd >= 0) {
844 if (rfd_close(lpc->lpc_pgdata_fd) != 0)
845 debug("could not close %d lpc_pgdata_fd %d",
846 (int)lpc->lpc_pid, lpc->lpc_pgdata_fd);
847 lpc->lpc_pgdata_fd = -1;
848 }
849 if (lpc->lpc_xmap_fd >= 0) {
850 if (rfd_close(lpc->lpc_xmap_fd) != 0)
851 debug("could not close %d lpc_xmap_fd %d",
852 (int)lpc->lpc_pid, lpc->lpc_xmap_fd);
853 lpc->lpc_xmap_fd = -1;
854 }
855 if (lpc->lpc_ignore != NULL)
856 lmapping_free(&lpc->lpc_ignore);
857 pid = lpc->lpc_pid;
858 free(lpc);
859 debug_high("process %d freed\n", (int)pid);
860 }
861
862 /*
863 * Collection clear callback.
864 */
865 /*ARGSUSED*/
866 static int
collection_clear_cb(lcollection_t * lcol,void * arg)867 collection_clear_cb(lcollection_t *lcol, void *arg)
868 {
869 lcol->lcol_mark = 0;
870
871 return (0);
872 }
873
874 /*
875 * Respond to a terminating signal by setting a termination flag.
876 */
877 /*ARGSUSED*/
878 static void
terminate_signal(int signal)879 terminate_signal(int signal)
880 {
881 if (termination_signal == 0)
882 termination_signal = signal;
883 should_run = 0;
884 }
885
886 /*
887 * Handle any synchronous or asynchronous signals that would ordinarily cause a
888 * process to abort.
889 */
890 /*ARGSUSED*/
891 static void
abort_signal(int signal)892 abort_signal(int signal)
893 {
894 /*
895 * Allow the scanner to make a last-ditch effort to resume any stopped
896 * processes.
897 */
898 scan_abort();
899 abort();
900 }
901
902 /*
903 * Clean up collections which have been removed due to configuration. Unlink
904 * the collection from lcollection and free it.
905 */
906 /*ARGSUSED*/
907 static int
collection_sweep_cb(lcollection_t * lcol,void * arg)908 collection_sweep_cb(lcollection_t *lcol, void *arg)
909 {
910 if (lcol->lcol_mark == 0) {
911 debug("freeing %s %s\n",
912 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ?
913 "project" : "zone"), lcol->lcol_name);
914 lcollection_free(lcol);
915 }
916
917 return (0);
918 }
919
920 /*
921 * Set those variables which depend on the global configuration.
922 */
923 static void
finish_configuration(void)924 finish_configuration(void)
925 {
926 /*
927 * Warn that any lnode (or non-project) mode specification (by an SRM
928 * 1.3 configuration file, for example) is ignored.
929 */
930 if (strcmp(rcfg.rcfg_mode_name, "project") != 0) {
931 warn(gettext("%s mode specification ignored -- using project"
932 " mode\n"), rcfg.rcfg_mode_name);
933 rcfg.rcfg_mode_name = "project";
934 rcfg.rcfg_mode = rctype_project;
935 }
936 }
937
938 /*
939 * Cause the configuration to be reread and applied.
940 */
941 static void
reread_configuration(void)942 reread_configuration(void)
943 {
944 rcfg_t rcfg_new;
945
946 if (rcfg_read(&rcfg_new, update_statistics) != E_SUCCESS) {
947 warn(gettext("can't reread configuration \n"));
948 exit(SMF_EXIT_ERR_CONFIG);
949 } else {
950 /*
951 * Done reading configuration. Remove existing
952 * collections in case there is a change in collection type.
953 */
954 if (rcfg.rcfg_mode != rcfg_new.rcfg_mode) {
955 list_walk_collection(collection_clear_cb, NULL);
956 list_walk_collection(collection_sweep_cb, NULL);
957 }
958
959 /*
960 * Make the newly-read configuration the global one, and update
961 * any variables that depend on it.
962 */
963 rcfg = rcfg_new;
964 finish_configuration();
965 }
966 }
967
968 /*
969 * First, examine changes, additions, and deletions to cap definitions.
970 * Then, set the next event time.
971 */
972 static void
reconfigure(hrtime_t now,hrtime_t * next_configuration,hrtime_t * next_proc_walk,hrtime_t * next_rss_sample)973 reconfigure(hrtime_t now, hrtime_t *next_configuration,
974 hrtime_t *next_proc_walk, hrtime_t *next_rss_sample)
975 {
976 debug("reconfigure...\n");
977
978 /*
979 * Walk the lcollection, marking active collections so inactive ones
980 * can be freed.
981 */
982 list_walk_collection(collection_clear_cb, NULL);
983 lcollection_update(LCU_ACTIVE_ONLY); /* mark */
984 list_walk_collection(collection_sweep_cb, NULL);
985
986 *next_configuration = NEXT_EVENT_TIME(now,
987 rcfg.rcfg_reconfiguration_interval);
988
989 /*
990 * Reset each event time to the shorter of the previous and new
991 * intervals.
992 */
993 if (next_report == 0 && rcfg.rcfg_report_interval > 0)
994 next_report = now;
995 else
996 next_report = POSITIVE_MIN(next_report,
997 NEXT_REPORT_EVENT_TIME(now, rcfg.rcfg_report_interval));
998
999 if (*next_proc_walk == 0 && rcfg.rcfg_proc_walk_interval > 0)
1000 *next_proc_walk = now;
1001 else
1002 *next_proc_walk = POSITIVE_MIN(*next_proc_walk,
1003 NEXT_EVENT_TIME(now, rcfg.rcfg_proc_walk_interval));
1004
1005 if (*next_rss_sample == 0 && rcfg.rcfg_rss_sample_interval > 0)
1006 *next_rss_sample = now;
1007 else
1008 *next_rss_sample = POSITIVE_MIN(*next_rss_sample,
1009 NEXT_EVENT_TIME(now, rcfg.rcfg_rss_sample_interval));
1010 }
1011
1012 /*
1013 * Respond to SIGHUP by triggering the rereading the configuration and cap
1014 * definitions.
1015 */
1016 /*ARGSUSED*/
1017 static void
sighup(int signal)1018 sighup(int signal)
1019 {
1020 should_reconfigure = 1;
1021 }
1022
1023 /*
1024 * Print, for debugging purposes, each collection's interval statistics.
1025 */
1026 /*ARGSUSED*/
1027 static int
simple_report_collection_cb(lcollection_t * lcol,void * arg)1028 simple_report_collection_cb(lcollection_t *lcol, void *arg)
1029 {
1030 #define DELTA(field) \
1031 (unsigned long long)( \
1032 (lcol->lcol_stat.field - lcol->lcol_stat_old.field))
1033
1034 debug("%s %s status: succeeded/attempted (k): %llu/%llu, "
1035 "ineffective/scans/unenforced/samplings: %llu/%llu/%llu/%llu, RSS "
1036 "min/max (k): %llu/%llu, cap %llu kB, processes/thpt: %llu/%llu, "
1037 "%llu scans over %llu ms\n",
1038 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ? "project" : "zone"),
1039 lcol->lcol_name,
1040 DELTA(lcols_pg_eff), DELTA(lcols_pg_att),
1041 DELTA(lcols_scan_ineffective), DELTA(lcols_scan),
1042 DELTA(lcols_unenforced_cap), DELTA(lcols_rss_sample),
1043 (unsigned long long)lcol->lcol_stat.lcols_min_rss,
1044 (unsigned long long)lcol->lcol_stat.lcols_max_rss,
1045 (unsigned long long)lcol->lcol_rss_cap,
1046 (unsigned long long)(lcol->lcol_stat.lcols_proc_in -
1047 lcol->lcol_stat.lcols_proc_out), DELTA(lcols_proc_out),
1048 DELTA(lcols_scan_count),
1049 NSEC2MSEC(DELTA(lcols_scan_time_complete)));
1050
1051 #undef DELTA
1052
1053 return (0);
1054 }
1055
1056 /*
1057 * Record each collection's interval statistics in the statistics file.
1058 */
1059 static int
report_collection_cb(lcollection_t * lcol,void * arg)1060 report_collection_cb(lcollection_t *lcol, void *arg)
1061 {
1062 lcollection_report_t dc;
1063 int fd = (intptr_t)arg;
1064
1065 /*
1066 * Copy the relevant fields to the collection's record.
1067 */
1068 bzero(&dc, sizeof (dc));
1069 dc.lcol_id = lcol->lcol_id;
1070 (void) strcpy(dc.lcol_name, lcol->lcol_name);
1071 dc.lcol_rss = lcol->lcol_rss;
1072 dc.lcol_image_size = lcol->lcol_image_size;
1073 dc.lcol_rss_cap = lcol->lcol_rss_cap;
1074 dc.lcol_stat = lcol->lcol_stat;
1075
1076 if (write(fd, &dc, sizeof (dc)) == sizeof (dc)) {
1077 lcol->lcol_stat_old = lcol->lcol_stat;
1078 } else {
1079 debug("can't write %s %s statistics",
1080 (lcol->lcol_id.rcid_type == RCIDT_PROJECT ?
1081 "project" : "zone"),
1082 lcol->lcol_name);
1083 }
1084
1085 return (0);
1086 }
1087
1088 /*
1089 * Determine the count of pages scanned by the global page scanner, obtained
1090 * from the cpu_stat:*::scan kstats. Return zero on success.
1091 */
1092 static int
get_globally_scanned_pages(uint64_t * scannedp)1093 get_globally_scanned_pages(uint64_t *scannedp)
1094 {
1095 kstat_t *ksp;
1096 uint64_t scanned = 0;
1097
1098 if (kstat_chain_update(kctl) == -1) {
1099 warn(gettext("can't update kstat chain"));
1100 return (0);
1101 }
1102
1103 for (ksp = kctl->kc_chain; ksp != NULL; ksp = ksp->ks_next) {
1104 if (strcmp(ksp->ks_module, "cpu_stat") == 0) {
1105 if (kstat_read(kctl, ksp, NULL) != -1) {
1106 scanned += ((cpu_stat_t *)
1107 ksp->ks_data)->cpu_vminfo.scan;
1108 } else {
1109 return (-1);
1110 }
1111 }
1112 }
1113
1114 *scannedp = scanned;
1115 return (0);
1116 }
1117
1118 /*
1119 * Determine if the global page scanner is running, during which no memory
1120 * caps should be enforced, to prevent interference with the global page
1121 * scanner.
1122 */
1123 static boolean_t
is_global_scanner_running()1124 is_global_scanner_running()
1125 {
1126 /* measure delta in page scan count */
1127 static uint64_t new_sp = 0;
1128 static uint64_t old_sp = 0;
1129 boolean_t res = B_FALSE;
1130
1131 if (get_globally_scanned_pages(&new_sp) == 0) {
1132 if (old_sp != 0 && (new_sp - old_sp) > 0) {
1133 debug("global memory pressure detected (%llu "
1134 "pages scanned since last interval)\n",
1135 (unsigned long long)(new_sp - old_sp));
1136 res = B_TRUE;
1137 }
1138 old_sp = new_sp;
1139 } else {
1140 warn(gettext("unable to read cpu statistics"));
1141 new_sp = old_sp;
1142 }
1143
1144 return (res);
1145 }
1146
1147 /*
1148 * If soft caps are in use, determine if global memory pressure exceeds the
1149 * configured maximum above which soft caps are enforced.
1150 */
1151 static boolean_t
must_enforce_soft_caps()1152 must_enforce_soft_caps()
1153 {
1154 /*
1155 * Check for changes to the amount of installed physical memory, to
1156 * compute the current memory pressure.
1157 */
1158 update_phys_total();
1159
1160 memory_pressure = 100 - (int)((sysconf(_SC_AVPHYS_PAGES) * page_size_kb)
1161 * 100.0 / phys_total);
1162 memory_pressure_sample++;
1163 if (rcfg.rcfg_memory_cap_enforcement_pressure > 0 &&
1164 memory_pressure > rcfg.rcfg_memory_cap_enforcement_pressure) {
1165 return (B_TRUE);
1166 }
1167
1168 return (B_FALSE);
1169 }
1170
1171 /*
1172 * Update the shared statistics file with each collection's current statistics.
1173 * Return zero on success.
1174 */
1175 static int
update_statistics(void)1176 update_statistics(void)
1177 {
1178 int fd, res;
1179 static char template[LINELEN];
1180
1181 /*
1182 * Try to create a directory irrespective of whether it is existing
1183 * or not. If it is not there then it will create. Otherwise any way
1184 * it will fail at mkstemp call below.
1185 */
1186 (void) mkdir(STAT_FILE_DIR, 0755);
1187
1188 /*
1189 * Create a temporary file.
1190 */
1191 if (sizeof (template) < (strlen(rcfg.rcfg_stat_file) +
1192 strlen(STAT_TEMPLATE_SUFFIX) + 1)) {
1193 debug("temporary file template size too small\n");
1194 return (-1);
1195 }
1196 (void) strcpy(template, rcfg.rcfg_stat_file);
1197 (void) strcat(template, STAT_TEMPLATE_SUFFIX);
1198 (void) rfd_reserve(1);
1199 fd = mkstemp(template);
1200
1201 /*
1202 * Write the header and per-collection statistics.
1203 */
1204 if (fd >= 0) {
1205 rcapd_stat_hdr_t rs;
1206
1207 rs.rs_pid = rcapd_pid;
1208 rs.rs_time = gethrtime();
1209 ASSERT(sizeof (rs.rs_mode) > strlen(rcfg.rcfg_mode_name));
1210 (void) strcpy(rs.rs_mode, rcfg.rcfg_mode_name);
1211 rs.rs_pressure_cur = memory_pressure;
1212 rs.rs_pressure_cap = rcfg.rcfg_memory_cap_enforcement_pressure;
1213 rs.rs_pressure_sample = memory_pressure_sample;
1214
1215 if (fchmod(fd, 0644) == 0 && write(fd, &rs, sizeof (rs)) ==
1216 sizeof (rs)) {
1217 list_walk_collection(report_collection_cb,
1218 (void *)(intptr_t)fd);
1219 /*
1220 * Replace the existing statistics file with this new
1221 * one.
1222 */
1223 res = rename(template, rcfg.rcfg_stat_file);
1224 } else
1225 res = -1;
1226 (void) close(fd);
1227 } else
1228 res = -1;
1229
1230 return (res);
1231 }
1232
1233 /*
1234 * Verify the statistics file can be created and written to, and die if an
1235 * existing file may be in use by another rcapd.
1236 */
1237 static int
verify_statistics(void)1238 verify_statistics(void)
1239 {
1240 pid_t pid;
1241
1242 /*
1243 * Warn if another instance of rcapd might be active.
1244 */
1245 (void) rfd_reserve(1);
1246 pid = stat_get_rcapd_pid(rcfg.rcfg_stat_file);
1247 if (pid != rcapd_pid && pid != -1)
1248 die(gettext("%s exists; rcapd may already be active\n"),
1249 rcfg.rcfg_stat_file);
1250
1251 return (update_statistics());
1252 }
1253
1254 static int
sum_excess_cb(lcollection_t * lcol,void * arg)1255 sum_excess_cb(lcollection_t *lcol, void *arg)
1256 {
1257 uint64_t *sum_excess = arg;
1258
1259 *sum_excess += MAX((int64_t)0, (int64_t)(lcol->lcol_rss -
1260 lcol->lcol_rss_cap));
1261 return (0);
1262 }
1263
1264 /*
1265 * Compute the quantity of memory (in kilobytes) above the cap enforcement
1266 * pressure. Set the scan goal to that quantity (or at most the excess).
1267 */
1268 static void
compute_soft_scan_goal(soft_scan_arg_t * argp)1269 compute_soft_scan_goal(soft_scan_arg_t *argp)
1270 {
1271 /*
1272 * Compute the sum of the collections' excesses, which will be the
1273 * denominator.
1274 */
1275 argp->ssa_sum_excess = 0;
1276 list_walk_collection(sum_excess_cb, &(argp->ssa_sum_excess));
1277
1278 argp->ssa_scan_goal = MIN((sysconf(_SC_PHYS_PAGES) *
1279 (100 - rcfg.rcfg_memory_cap_enforcement_pressure) / 100 -
1280 sysconf(_SC_AVPHYS_PAGES)) * page_size_kb,
1281 argp->ssa_sum_excess);
1282 }
1283
1284 static void
rcapd_usage(void)1285 rcapd_usage(void)
1286 {
1287 info(gettext("usage: rcapd [-d]\n"));
1288 }
1289
1290 void
check_update_statistics(void)1291 check_update_statistics(void)
1292 {
1293 hrtime_t now = gethrtime();
1294
1295 if (EVENT_TIME(now, next_report)) {
1296 debug("updating statistics...\n");
1297 list_walk_collection(simple_report_collection_cb, NULL);
1298 if (update_statistics() != 0)
1299 debug("couldn't update statistics");
1300 next_report = NEXT_REPORT_EVENT_TIME(now,
1301 rcfg.rcfg_report_interval);
1302 }
1303 }
1304
1305 static void
verify_and_set_privileges(void)1306 verify_and_set_privileges(void)
1307 {
1308 priv_set_t *required =
1309 priv_str_to_set("zone,sys_resource,proc_owner", ",", NULL);
1310
1311 /*
1312 * Ensure the required privileges, suitable for controlling processes,
1313 * are possessed.
1314 */
1315 if (setppriv(PRIV_SET, PRIV_PERMITTED, required) != 0 || setppriv(
1316 PRIV_SET, PRIV_EFFECTIVE, required) != 0)
1317 die(gettext("can't set requisite privileges"));
1318
1319 /*
1320 * Ensure access to /var/run/daemon.
1321 */
1322 if (setreuid(DAEMON_UID, DAEMON_UID) != 0)
1323 die(gettext("cannot become user daemon"));
1324
1325 priv_freeset(required);
1326 }
1327
1328 /*
1329 * This function does the top-level work to determine if we should do any
1330 * memory capping, and if so, it invokes the right call-backs to do the work.
1331 */
1332 static void
do_capping(hrtime_t now,hrtime_t * next_proc_walk)1333 do_capping(hrtime_t now, hrtime_t *next_proc_walk)
1334 {
1335 boolean_t enforce_caps;
1336 /* soft cap enforcement flag, depending on memory pressure */
1337 boolean_t enforce_soft_caps;
1338 /* avoid interference with kernel's page scanner */
1339 boolean_t global_scanner_running;
1340 sample_col_arg_t col_arg;
1341 soft_scan_arg_t arg;
1342 uint_t col_types = 0;
1343
1344 /* check what kind of collections (project/zone) are capped */
1345 list_walk_collection(col_type_cb, &col_types);
1346 debug("collection types: 0x%x\n", col_types);
1347
1348 /* no capped collections, skip checking rss */
1349 if (col_types == 0)
1350 return;
1351
1352 /* Determine if soft caps are enforced. */
1353 enforce_soft_caps = must_enforce_soft_caps();
1354
1355 /* Determine if the global page scanner is running. */
1356 global_scanner_running = is_global_scanner_running();
1357
1358 /*
1359 * Sample collections' member processes RSSes and recompute
1360 * collections' excess.
1361 */
1362 rss_sample(B_FALSE, col_types);
1363
1364 col_arg.sca_any_over_cap = B_FALSE;
1365 col_arg.sca_project_over_cap = B_FALSE;
1366 list_walk_collection(rss_sample_col_cb, &col_arg);
1367 list_walk_collection(excess_print_cb, NULL);
1368 debug("any collection/project over cap = %d, %d\n",
1369 col_arg.sca_any_over_cap, col_arg.sca_project_over_cap);
1370
1371 if (enforce_soft_caps)
1372 debug("memory pressure %d%%\n", memory_pressure);
1373
1374 /*
1375 * Cap enforcement is determined by the previous conditions.
1376 */
1377 enforce_caps = !global_scanner_running && col_arg.sca_any_over_cap &&
1378 (rcfg.rcfg_memory_cap_enforcement_pressure == 0 ||
1379 enforce_soft_caps);
1380
1381 debug("%senforcing caps\n", enforce_caps ? "" : "not ");
1382
1383 /*
1384 * If soft caps are in use, determine the size of the portion from each
1385 * collection to scan for.
1386 */
1387 if (enforce_caps && enforce_soft_caps)
1388 compute_soft_scan_goal(&arg);
1389
1390 /*
1391 * Victimize offending collections.
1392 */
1393 if (enforce_caps && (!enforce_soft_caps ||
1394 (arg.ssa_scan_goal > 0 && arg.ssa_sum_excess > 0))) {
1395
1396 /*
1397 * Since at least one collection is over its cap & needs
1398 * enforcing, check if it is at least time for a process walk
1399 * (we could be well past time since we only walk /proc when
1400 * we need to) and if so, update each collections process list
1401 * in a single pass through /proc.
1402 */
1403 if (EVENT_TIME(now, *next_proc_walk)) {
1404 debug("scanning process list...\n");
1405 proc_walk_all(proc_cb); /* insert & mark */
1406 list_walk_all(sweep_process_cb); /* free dead procs */
1407 *next_proc_walk = NEXT_EVENT_TIME(now,
1408 rcfg.rcfg_proc_walk_interval);
1409 }
1410
1411 gz_col = NULL;
1412 if (enforce_soft_caps) {
1413 debug("scan goal is %lldKB\n",
1414 (long long)arg.ssa_scan_goal);
1415 list_walk_collection(soft_scan_cb, &arg);
1416 if (gz_capped && gz_col != NULL) {
1417 /* process global zone */
1418 arg.ssa_project_over_cap =
1419 col_arg.sca_project_over_cap;
1420 soft_scan_gz(gz_col, &arg);
1421 }
1422 } else {
1423 list_walk_collection(scan_cb, NULL);
1424 if (gz_capped && gz_col != NULL) {
1425 /* process global zone */
1426 scan_gz(gz_col, col_arg.sca_project_over_cap);
1427 }
1428 }
1429 } else if (col_arg.sca_any_over_cap) {
1430 list_walk_collection(unenforced_cap_cb, NULL);
1431 }
1432 }
1433
1434 int
main(int argc,char * argv[])1435 main(int argc, char *argv[])
1436 {
1437 int res;
1438 int should_fork = 1; /* fork flag */
1439 hrtime_t now; /* current time */
1440 hrtime_t next; /* time of next event */
1441 int sig; /* signal iteration */
1442 struct rlimit rl;
1443 hrtime_t next_proc_walk; /* time of next /proc scan */
1444 hrtime_t next_configuration; /* time of next configuration */
1445 hrtime_t next_rss_sample; /* (latest) time of next RSS sample */
1446
1447 (void) set_message_priority(RCM_INFO);
1448 (void) setpname("rcapd");
1449 rcapd_pid = getpid();
1450 (void) chdir("/");
1451 should_run = 1;
1452 ever_ran = 0;
1453
1454 (void) setlocale(LC_ALL, "");
1455 (void) textdomain(TEXT_DOMAIN);
1456
1457 /*
1458 * Parse command-line options.
1459 */
1460 while ((res = getopt(argc, argv, "dF")) > 0)
1461 switch (res) {
1462 case 'd':
1463 should_fork = 0;
1464 if (debug_mode == 0) {
1465 debug_mode = 1;
1466 (void) set_message_priority(RCM_DEBUG);
1467 } else
1468 (void) set_message_priority(RCM_DEBUG_HIGH);
1469 break;
1470 case 'F':
1471 should_fork = 0;
1472 break;
1473 default:
1474 rcapd_usage();
1475 return (E_USAGE);
1476 /*NOTREACHED*/
1477 }
1478
1479 /*
1480 * Read the configuration.
1481 */
1482 if (rcfg_read(&rcfg, verify_statistics) != E_SUCCESS) {
1483 warn(gettext("resource caps not configured\n"));
1484 return (SMF_EXIT_ERR_CONFIG);
1485 }
1486
1487 /*
1488 * If not debugging, fork and continue operating, changing the
1489 * destination of messages to syslog().
1490 */
1491 if (should_fork == 1) {
1492 pid_t child;
1493 debug("forking\n");
1494 child = fork();
1495 if (child == -1)
1496 die(gettext("cannot fork"));
1497 if (child > 0)
1498 return (0);
1499 else {
1500 rcapd_pid = getpid();
1501 (void) set_message_destination(RCD_SYSLOG);
1502 (void) fclose(stdin);
1503 (void) fclose(stdout);
1504 (void) fclose(stderr);
1505 }
1506 /*
1507 * Start a new session and detatch from the controlling tty.
1508 */
1509 if (setsid() == (pid_t)-1)
1510 debug(gettext("setsid() failed; cannot detach from "
1511 "terminal"));
1512 }
1513
1514 finish_configuration();
1515 should_reconfigure = 0;
1516
1517 /*
1518 * Check that required privileges are possessed.
1519 */
1520 verify_and_set_privileges();
1521
1522 now = next_report = next_proc_walk = next_rss_sample = gethrtime();
1523 next_configuration = NEXT_EVENT_TIME(gethrtime(),
1524 rcfg.rcfg_reconfiguration_interval);
1525
1526 /*
1527 * Open the kstat chain.
1528 */
1529 kctl = kstat_open();
1530 if (kctl == NULL)
1531 die(gettext("can't open kstats"));
1532
1533 /*
1534 * Set RLIMIT_NOFILE as high as practical, so roughly 10K processes can
1535 * be effectively managed without revoking descriptors (at 3 per
1536 * process).
1537 */
1538 rl.rlim_cur = 32 * 1024;
1539 rl.rlim_max = 32 * 1024;
1540 if (setrlimit(RLIMIT_NOFILE, &rl) != 0 &&
1541 getrlimit(RLIMIT_NOFILE, &rl) == 0) {
1542 rl.rlim_cur = rl.rlim_max;
1543 (void) setrlimit(RLIMIT_NOFILE, &rl);
1544 }
1545 (void) enable_extended_FILE_stdio(-1, -1);
1546
1547 if (getrlimit(RLIMIT_NOFILE, &rl) == 0)
1548 debug("fd limit: %lu\n", rl.rlim_cur);
1549 else
1550 debug("fd limit: unknown\n");
1551
1552 get_page_size();
1553 my_zoneid = getzoneid();
1554
1555 /*
1556 * Handle those signals whose (default) exit disposition
1557 * prevents rcapd from finishing scanning before terminating.
1558 */
1559 (void) sigset(SIGINT, terminate_signal);
1560 (void) sigset(SIGQUIT, abort_signal);
1561 (void) sigset(SIGILL, abort_signal);
1562 (void) sigset(SIGEMT, abort_signal);
1563 (void) sigset(SIGFPE, abort_signal);
1564 (void) sigset(SIGBUS, abort_signal);
1565 (void) sigset(SIGSEGV, abort_signal);
1566 (void) sigset(SIGSYS, abort_signal);
1567 (void) sigset(SIGPIPE, terminate_signal);
1568 (void) sigset(SIGALRM, terminate_signal);
1569 (void) sigset(SIGTERM, terminate_signal);
1570 (void) sigset(SIGUSR1, terminate_signal);
1571 (void) sigset(SIGUSR2, terminate_signal);
1572 (void) sigset(SIGPOLL, terminate_signal);
1573 (void) sigset(SIGVTALRM, terminate_signal);
1574 (void) sigset(SIGXCPU, abort_signal);
1575 (void) sigset(SIGXFSZ, abort_signal);
1576 for (sig = SIGRTMIN; sig <= SIGRTMAX; sig++)
1577 (void) sigset(sig, terminate_signal);
1578
1579 /*
1580 * Install a signal handler for reconfiguration processing.
1581 */
1582 (void) sigset(SIGHUP, sighup);
1583
1584 /*
1585 * Determine which process collections to cap.
1586 */
1587 lcollection_update(LCU_COMPLETE);
1588
1589 /*
1590 * Loop forever, monitoring collections' resident set sizes and
1591 * enforcing their caps. Look for changes in caps as well as
1592 * responding to requests to reread the configuration. Update
1593 * per-collection statistics periodically.
1594 */
1595 while (should_run != 0) {
1596 struct timespec ts;
1597
1598 /*
1599 * Announce that rcapd is starting.
1600 */
1601 if (ever_ran == 0) {
1602 info(gettext("starting\n"));
1603 ever_ran = 1;
1604 }
1605
1606 /*
1607 * Check the configuration at every next_configuration interval.
1608 * Update the rss data once every next_rss_sample interval.
1609 * The condition of global memory pressure is also checked at
1610 * the same frequency, if strict caps are in use.
1611 */
1612 now = gethrtime();
1613
1614 /*
1615 * Detect configuration and cap changes only when SIGHUP
1616 * is received. Call reconfigure to apply new configuration
1617 * parameters.
1618 */
1619 if (should_reconfigure == 1) {
1620 reread_configuration();
1621 should_reconfigure = 0;
1622 reconfigure(now, &next_configuration, &next_proc_walk,
1623 &next_rss_sample);
1624 }
1625
1626 if (EVENT_TIME(now, next_configuration)) {
1627 reconfigure(now, &next_configuration, &next_proc_walk,
1628 &next_rss_sample);
1629 }
1630
1631 /*
1632 * Do the main work for enforcing caps.
1633 */
1634 if (EVENT_TIME(now, next_rss_sample)) {
1635 do_capping(now, &next_proc_walk);
1636
1637 next_rss_sample = NEXT_EVENT_TIME(now,
1638 rcfg.rcfg_rss_sample_interval);
1639 }
1640
1641 /*
1642 * Update the statistics file, if it's time.
1643 */
1644 check_update_statistics();
1645
1646 /*
1647 * Sleep for some time before repeating.
1648 */
1649 now = gethrtime();
1650 next = next_configuration;
1651 next = POSITIVE_MIN(next, next_report);
1652 next = POSITIVE_MIN(next, next_rss_sample);
1653 if (next > now && should_run != 0) {
1654 debug("sleeping %-4.2f seconds\n", (float)(next -
1655 now) / (float)NANOSEC);
1656 hrt2ts(next - now, &ts);
1657 (void) nanosleep(&ts, NULL);
1658 }
1659 }
1660 if (termination_signal != 0)
1661 debug("exiting due to signal %d\n", termination_signal);
1662 if (ever_ran != 0)
1663 info(gettext("exiting\n"));
1664
1665 /*
1666 * Unlink the statistics file before exiting.
1667 */
1668 if (rcfg.rcfg_stat_file[0] != 0)
1669 (void) unlink(rcfg.rcfg_stat_file);
1670
1671 return (E_SUCCESS);
1672 }
1673