xref: /illumos-gate/usr/src/cmd/mdb/common/modules/usba/usb.c (revision 20a7641f9918de8574b8b3b47dbe35c4bfc78df1)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  *
25  * Copyright 2016 Joyent, Inc.
26  */
27 
28 #include <stddef.h>
29 #include <sys/mdb_modapi.h>
30 #include <mdb/mdb_ks.h>
31 
32 #include <sys/usb/usba.h>
33 #include <sys/ddi_impldefs.h>
34 #include <sys/usb/usba/usba_types.h>
35 #include <sys/usb/usba/usba_impl.h>
36 #include <sys/usb/usba/hcdi_impl.h>
37 #include <sys/usb/hubd/hub.h>
38 #include <sys/usb/hubd/hubdvar.h>
39 #include <sys/file.h>
40 #include <sys/sunndi.h>
41 #include <unistd.h>
42 
43 
44 /*
45  * Prototypes
46  */
47 /* usba.c */
48 extern uintptr_t mdb_usba_get_usba_device(uintptr_t);
49 extern uintptr_t mdb_usba_hcdi_get_hcdi(struct dev_info *);
50 
51 /*
52  * Defines
53  */
54 /* dcmd options */
55 #define	USB_DUMP_VERBOSE	0x01
56 #define	USB_DUMP_ACTIVE_PIPES	0x02
57 
58 /* Hardcoded slop factor designed into debug buf logic */
59 #define	USB_DEBUG_SIZE_EXTRA_ALLOC 8
60 
61 
62 /*
63  * Callback arg struct for find_dip (callback func used in usba_device2devinfo).
64  */
65 typedef struct usba_device2devinfo_data {
66 	uintptr_t	u2d_target_usb_dev_p;	/* one we're looking for */
67 	uintptr_t	*u2d_dip_addr;		/* Where to store result */
68 	boolean_t	u2d_found;		/* Match found */
69 } usba_device2devinfo_cbdata_t;
70 
71 
72 /*
73  * Callback for usba_device2dip.
74  * Callback called from the devinfo_children walk invoked in usba_device2dip.
75  *
76  * For the current dip, get the (potential) pointer to its usba_device_t
77  * struct.
78  * See if this pointer matches the address of the usba_device_t we're looking
79  * for (passed in as usb_dev_p).  If so, stuff its value in u2d_dip_addr,
80  * and terminate the walk.
81  *
82  * - dip_addr is the address in core of the dip currently being processed by the
83  * walk
84  * - local_dip is a pointer to a copy of the struct dev_info in local memory
85  * - cb_data is the addr of the callback arg the walker was invoked with
86  * (passed through transparently from walk invoker).
87  *
88  * Returns:
89  * - WALK_NEXT on success (match not found yet)
90  * - WALK_ERR on errors.
91  * - WALK_DONE is returned, cb_data.found is set to TRUE, and
92  * *cb_data.u2d_dip_addr is set to the matched dip addr if a dip corresponding
93  * to the desired usba_device_t* is found.
94  */
95 /*ARGSUSED*/
96 static int
97 find_dip(uintptr_t dip_addr, const void *local_dip, void *cb_arg)
98 {
99 	uintptr_t			cur_usb_dev;
100 	usba_device2devinfo_cbdata_t	*cb_data =
101 	    (usba_device2devinfo_cbdata_t *)cb_arg;
102 
103 	if ((cur_usb_dev = mdb_usba_get_usba_device(dip_addr)) == 0) {
104 		/*
105 		 * If there's no corresponding usba_device_t, this dip isn't
106 		 * a usb node.  Might be an sd node.  Ignore it.
107 		 */
108 
109 		return (WALK_NEXT);
110 	}
111 
112 	if (cur_usb_dev == cb_data->u2d_target_usb_dev_p) {
113 		*cb_data->u2d_dip_addr = dip_addr;
114 		cb_data->u2d_found = TRUE;
115 
116 		return (WALK_DONE);
117 	}
118 
119 	return (WALK_NEXT);
120 }
121 
122 
123 /*
124  * Given a usba_device pointer, figure out which dip is associated with it.
125  * Relies on usba_device.usb_root_hub_dip being accurate.
126  *
127  * - usb_dev_addr is a pointer to a usba_device_t in core.
128  * - dip_addr is the address of a uintptr_t to receive the address in core
129  * of the found dip (if any).
130  *
131  * Returns:
132  *  0 on success (no match found)
133  *  1 on success (match found)
134  * -1 on errors.
135  */
136 static int
137 usba_device2dip(uintptr_t usb_dev_addr, uintptr_t *dip_addr)
138 {
139 	usba_device_t			usb_dev;
140 	usba_device2devinfo_cbdata_t	cb_data;
141 
142 	/*
143 	 * Walk all USB children of the root hub devinfo.
144 	 * The callback func looks for a match on the usba_device address.
145 	 */
146 	cb_data.u2d_target_usb_dev_p = usb_dev_addr;
147 	cb_data.u2d_dip_addr = dip_addr;
148 	cb_data.u2d_found = FALSE;
149 
150 	if (mdb_vread(&usb_dev, sizeof (usba_device_t),
151 	    usb_dev_addr) == -1) {
152 		mdb_warn("failed to read usba_device struct");
153 
154 		return (-1);
155 	}
156 
157 	/*
158 	 * Walk devinfo children starting with the root hub node,
159 	 * looking for a match on the usba_device pointer (which is what
160 	 * find_dip does).
161 	 * Result is placed in cb_data.dip_addr.
162 	 */
163 	if (mdb_pwalk("devinfo_children", find_dip, &cb_data,
164 	    (uintptr_t)usb_dev.usb_root_hub_dip) != 0) {
165 		mdb_warn("failed to walk devinfo_children");
166 
167 		return (-1);
168 	}
169 
170 	if (cb_data.u2d_found == TRUE) {
171 
172 		return (1);
173 	}
174 
175 	return (0);
176 }
177 
178 
179 /*
180  * Generic walker usba_list_entry_t walker.
181  * Works for any usba_list_entry_t list.
182  */
183 int
184 usba_list_walk_init(mdb_walk_state_t *wsp)
185 {
186 	/* Must have a start addr.  */
187 	if (wsp->walk_addr == 0) {
188 		mdb_warn("not a global walk.  Starting address required\n");
189 
190 		return (WALK_ERR);
191 	}
192 
193 	return (WALK_NEXT);
194 }
195 
196 
197 /*
198  * Generic list walker step routine.
199  * NOTE: multiple walkers share this routine.
200  */
201 int
202 usba_list_walk_step(mdb_walk_state_t *wsp)
203 {
204 	int			status;
205 	usba_list_entry_t	list_entry;
206 
207 	if (mdb_vread(&list_entry, sizeof (usba_list_entry_t),
208 	    (uintptr_t)wsp->walk_addr) == -1) {
209 		mdb_warn("failed to read usba_list_entry_t at %p",
210 		    wsp->walk_addr);
211 
212 		return (WALK_ERR);
213 	}
214 
215 	status = wsp->walk_callback(wsp->walk_addr, &list_entry,
216 	    wsp->walk_cbdata);
217 	wsp->walk_addr = (uintptr_t)list_entry.next;
218 
219 	/* Check if we're at the last element */
220 	if (wsp->walk_addr == 0) {
221 
222 		return (WALK_DONE);
223 	}
224 
225 	return (status);
226 }
227 
228 
229 /*
230  * usb_pipe_handle walker
231  * Given a pointer to a usba_device_t, walk the array of endpoint
232  * pipe_handle lists.
233  * For each list, traverse the list, invoking the callback on each element.
234  *
235  * Note this function takes the address of a usba_device struct (which is
236  * easily obtainable), but actually traverses a sub-portion of the struct
237  * (which address is not so easily obtainable).
238  */
239 int
240 usb_pipe_handle_walk_init(mdb_walk_state_t *wsp)
241 {
242 	if (wsp->walk_addr == 0) {
243 		mdb_warn("not a global walk; usba_device_t required\n");
244 
245 		return (WALK_ERR);
246 	}
247 
248 	wsp->walk_data = mdb_alloc((sizeof (usba_ph_impl_t)) * USBA_N_ENDPOINTS,
249 	    UM_SLEEP | UM_GC);
250 
251 	/*
252 	 * Read the usb_ph_list array into local memory.
253 	 * Set start address to first element/endpoint in usb_pipehandle_list
254 	 */
255 	if (mdb_vread(wsp->walk_data,
256 	    (sizeof (usba_ph_impl_t)) * USBA_N_ENDPOINTS,
257 	    (uintptr_t)((size_t)(wsp->walk_addr) +
258 	    offsetof(usba_device_t, usb_ph_list))) == -1) {
259 		mdb_warn("failed to read usb_pipehandle_list at %p",
260 		    wsp->walk_addr);
261 
262 		return (WALK_ERR);
263 	}
264 
265 	wsp->walk_arg = 0;
266 
267 	return (WALK_NEXT);
268 }
269 
270 
271 int
272 usb_pipe_handle_walk_step(mdb_walk_state_t *wsp)
273 {
274 	int status;
275 	usba_ph_impl_t *impl_list = (usba_ph_impl_t *)(wsp->walk_data);
276 	intptr_t index = (intptr_t)wsp->walk_arg;
277 
278 	/* Find the first valid endpoint, starting from where we left off. */
279 	while ((index < USBA_N_ENDPOINTS) &&
280 	    (impl_list[index].usba_ph_data == NULL)) {
281 		index++;
282 	}
283 
284 	/* No more valid endpoints. */
285 	if (index >= USBA_N_ENDPOINTS) {
286 
287 		return (WALK_DONE);
288 	}
289 
290 	status = wsp->walk_callback((uintptr_t)impl_list[index].usba_ph_data,
291 	    wsp->walk_data, wsp->walk_cbdata);
292 
293 	/* Set up to start at next pipe handle next time. */
294 	wsp->walk_arg = (void *)(index + 1);
295 
296 	return (status);
297 }
298 
299 
300 /*
301  * Given the address of a usba_pipe_handle_data_t, dump summary info.
302  */
303 /*ARGSUSED*/
304 int
305 usb_pipe_handle(uintptr_t addr, uint_t flags, int argc, const mdb_arg_t *argv)
306 {
307 	char			*dir, *type, *state;
308 	usb_ep_descr_t		ept_descr;
309 	usba_pipe_handle_data_t	pipe_handle;
310 	usba_ph_impl_t		ph_impl;
311 
312 	if (!(flags & DCMD_ADDRSPEC)) {
313 
314 		return (DCMD_USAGE);
315 	}
316 
317 	if (mdb_vread(&pipe_handle,
318 	    sizeof (usba_pipe_handle_data_t), addr) == -1) {
319 		mdb_warn("failed to read pipe handle at %p", addr);
320 
321 		return (DCMD_ERR);
322 	}
323 
324 	if (mdb_vread(&ph_impl, sizeof (usba_ph_impl_t),
325 	    (uintptr_t)pipe_handle.p_ph_impl) == -1) {
326 		state = "*******";
327 	} else {
328 		switch (ph_impl.usba_ph_state) {
329 		case USB_PIPE_STATE_CLOSED:
330 			state = "CLOSED ";
331 			break;
332 
333 		case USB_PIPE_STATE_IDLE:
334 			state = "IDLE   ";
335 			break;
336 
337 		case USB_PIPE_STATE_ACTIVE:
338 			state = "ACTIVE ";
339 			break;
340 
341 		case USB_PIPE_STATE_ERROR:
342 			state = "ERROR  ";
343 			break;
344 
345 		case USB_PIPE_STATE_CLOSING:
346 			state = "CLOSING";
347 			break;
348 
349 		default:
350 			state = "ILLEGAL";
351 			break;
352 		}
353 	}
354 
355 	bcopy(&pipe_handle.p_ep, &ept_descr, sizeof (usb_ep_descr_t));
356 
357 	if (DCMD_HDRSPEC(flags)) {
358 		mdb_printf("\n    %<u>%-3s %5s %3s %7s %-?s %-?s %-?s%</u>\n",
359 		    "EP", "TYPE ", "DIR", "STATE  ", "P_HANDLE", "P_POLICY",
360 		    "EP DESCR");
361 	}
362 
363 	dir = ((ept_descr.bEndpointAddress & USB_EP_DIR_MASK) &
364 	    USB_EP_DIR_IN) ? "In " : "Out";
365 	switch (ept_descr.bmAttributes & USB_EP_ATTR_MASK) {
366 	case USB_EP_ATTR_CONTROL:
367 		type = "Cntrl";
368 		break;
369 
370 	case USB_EP_ATTR_ISOCH:
371 		type = "Isoch";
372 		break;
373 
374 	case USB_EP_ATTR_BULK:
375 		type = "Bulk ";
376 		break;
377 
378 	case USB_EP_ATTR_INTR:
379 		type = "Intr ";
380 		break;
381 
382 	default:
383 		type = "*****";
384 		break;
385 	}
386 
387 	mdb_printf("    %3d %5s %3s %7s %-?p %-?p %-?p\n",
388 	    ept_descr.bEndpointAddress & USB_EP_NUM_MASK, type, dir, state,
389 	    addr, addr + offsetof(usba_pipe_handle_data_t, p_policy),
390 	    addr + offsetof(usba_pipe_handle_data_t, p_ep));
391 
392 	return (DCMD_OK);
393 }
394 
395 
396 /*
397  * usba_device walker:
398  *
399  * walks the chain of usba_device structs headed by usba_device_list in usba.c
400  * NOTE: It uses the generic list walk step routine usba_list_walk_step.
401  * No walk_fini routine is needed.
402  */
403 int
404 usba_device_walk_init(mdb_walk_state_t *wsp)
405 {
406 	usba_list_entry_t	list_entry;
407 
408 	if (wsp->walk_addr != 0) {
409 		mdb_warn(
410 		    "global walk only.  Must be invoked without an address\n");
411 
412 		return (WALK_ERR);
413 	}
414 
415 	if (mdb_readvar(&list_entry, "usba_device_list") == -1) {
416 		mdb_warn("failed to read usba_device_list");
417 
418 		return (WALK_ERR);
419 	}
420 
421 	/* List head is not part of usba_device_t, get first usba_device_t */
422 	wsp->walk_addr = (uintptr_t)list_entry.next;
423 
424 	return (WALK_NEXT);
425 }
426 
427 int
428 usba_hubd_walk_init(mdb_walk_state_t *wsp)
429 {
430 	if (wsp->walk_addr != 0) {
431 		mdb_warn("hubd only supports global walks.\n");
432 		return (WALK_ERR);
433 	}
434 
435 	if (mdb_layered_walk("usba_device", wsp) == -1) {
436 		mdb_warn("couldn't walk 'usba_device'");
437 		return (WALK_ERR);
438 	}
439 
440 	return (WALK_NEXT);
441 }
442 
443 /*
444  * Getting the hub state is annoying. The root hubs are stored on dev_info_t
445  * while the normal hubs are stored as soft state.
446  */
447 int
448 usba_hubd_walk_step(mdb_walk_state_t *wsp)
449 {
450 	usba_device_t ud;
451 	hubd_t hubd;
452 	struct dev_info dev_info;
453 	uintptr_t state_addr;
454 
455 	if (mdb_vread(&ud, sizeof (ud), wsp->walk_addr) != sizeof (ud)) {
456 		mdb_warn("failed to read usba_device_t at %p", wsp->walk_addr);
457 		return (WALK_ERR);
458 	}
459 
460 	if (ud.usb_root_hubd != NULL) {
461 		if (mdb_vread(&hubd, sizeof (hubd),
462 		    (uintptr_t)ud.usb_root_hubd) != sizeof (hubd)) {
463 			mdb_warn("failed to read hubd at %p", ud.usb_root_hubd);
464 			return (WALK_ERR);
465 		}
466 		return (wsp->walk_callback((uintptr_t)ud.usb_root_hubd, &hubd,
467 		    wsp->walk_cbdata));
468 	}
469 
470 	if (ud.usb_hubdi == NULL)
471 		return (WALK_NEXT);
472 
473 	/*
474 	 * For non-root hubs, the hubd_t is stored in the soft state. Figure out
475 	 * the instance from the dev_info_t and then get its soft state.
476 	 */
477 	if (mdb_vread(&dev_info, sizeof (struct dev_info),
478 	    (uintptr_t)ud.usb_dip) != sizeof (struct dev_info)) {
479 		mdb_warn("failed to read dev_info_t for device %p at %p",
480 		    wsp->walk_addr, ud.usb_dip);
481 		return (WALK_ERR);
482 	}
483 
484 	if (mdb_get_soft_state_byname("hubd_statep", dev_info.devi_instance,
485 	    &state_addr, &hubd, sizeof (hubd)) == -1) {
486 		mdb_warn("failed to read hubd soft state for instance %d from "
487 		    "usb device %p", dev_info.devi_instance, wsp->walk_addr);
488 		return (WALK_ERR);
489 	}
490 
491 	return (wsp->walk_callback(state_addr, &hubd, wsp->walk_cbdata));
492 }
493 
494 /*
495  * usba_device dcmd
496  *	Given the address of a usba_device struct, dump summary info
497  *	-v:	Print more (verbose) info
498  *	-p:	Walk/dump all open pipes for this usba_device
499  */
500 /*ARGSUSED*/
501 int
502 usba_device(uintptr_t addr, uint_t flags, int argc, const mdb_arg_t *argv)
503 {
504 	int		status;
505 	char		pathname[MAXNAMELEN];
506 	char		dname[MODMAXNAMELEN + 1] = "<unatt>"; /* Driver name */
507 	char		drv_statep[MODMAXNAMELEN+ 10];
508 	uint_t		usb_flag  = 0;
509 	boolean_t	no_driver_attached = FALSE;
510 	uintptr_t	dip_addr;
511 	struct dev_info	devinfo;
512 
513 	if (!(flags & DCMD_ADDRSPEC)) {
514 		/* Global walk */
515 		if (mdb_walk_dcmd("usba_device", "usba_device", argc,
516 		    argv) == -1) {
517 			mdb_warn("failed to walk usba_device");
518 
519 			return (DCMD_ERR);
520 		}
521 
522 		return (DCMD_OK);
523 	}
524 
525 	if (mdb_getopts(argc, argv,
526 	    'p', MDB_OPT_SETBITS, USB_DUMP_ACTIVE_PIPES, &usb_flag,
527 	    'v', MDB_OPT_SETBITS, USB_DUMP_VERBOSE, &usb_flag, NULL) != argc) {
528 
529 		return (DCMD_USAGE);
530 	}
531 
532 	if (usb_flag && !(DCMD_HDRSPEC(flags))) {
533 		mdb_printf("\n");
534 	}
535 
536 	if (DCMD_HDRSPEC(flags)) {
537 		mdb_printf("%<u>%-15s %4s %-?s %-42s%</u>\n",
538 		    "NAME", "INST", "DIP", "PATH                             ");
539 	}
540 
541 	status = usba_device2dip(addr, &dip_addr);
542 	/*
543 	 * -1 = error
544 	 * 0 = no error, no match
545 	 * 1 = no error, match
546 	 */
547 	if (status != 1) {
548 		if (status == -1) {
549 			mdb_warn("error looking for dip for usba_device %p",
550 			    addr);
551 		} else {
552 			mdb_warn("failed to find dip for usba_device %p\n",
553 			    addr);
554 		}
555 		mdb_warn("dip and statep unobtainable\n");
556 
557 		return (DCMD_ERR);
558 	}
559 
560 	/* Figure out what driver (name) is attached to this node. */
561 	(void) mdb_devinfo2driver(dip_addr, (char *)dname, sizeof (dname));
562 
563 	if (mdb_vread(&devinfo, sizeof (struct dev_info),
564 	    dip_addr) == -1) {
565 		mdb_warn("failed to read devinfo");
566 
567 		return (DCMD_ERR);
568 	}
569 
570 	if (!(DDI_CF2(&devinfo))) {
571 		no_driver_attached = TRUE;
572 	}
573 
574 	(void) mdb_ddi_pathname(dip_addr, pathname, sizeof (pathname));
575 	mdb_printf("%-15s %2d   %-?p %s\n", dname, devinfo.devi_instance,
576 	    dip_addr, pathname);
577 
578 	if (usb_flag & USB_DUMP_VERBOSE) {
579 		int		i;
580 		uintptr_t	statep = 0;
581 		char		*string_descr;
582 		char		**config_cloud, **conf_str_descr;
583 		usb_dev_descr_t	usb_dev_descr;
584 		usba_device_t	usba_device_struct;
585 
586 		if (mdb_vread(&usba_device_struct,
587 		    sizeof (usba_device_t), addr) == -1) {
588 			mdb_warn("failed to read usba_device struct");
589 
590 			return (DCMD_ERR);
591 		}
592 
593 		mdb_printf("    usba_device: %-16p\n\n", (usba_device_t *)addr);
594 
595 		if (mdb_vread(&usb_dev_descr, sizeof (usb_dev_descr),
596 		    (uintptr_t)usba_device_struct.usb_dev_descr) == -1) {
597 			mdb_warn("failed to read usb_dev_descr_t struct");
598 
599 			return (DCMD_ERR);
600 		}
601 
602 		mdb_printf("\n    idVendor: 0x%04x idProduct: 0x%04x "
603 		    "usb_addr: 0x%02x\n", usb_dev_descr.idVendor,
604 		    usb_dev_descr.idProduct, usba_device_struct.usb_addr);
605 
606 		/* Get the string descriptor string into local space. */
607 		string_descr = (char *)mdb_alloc(USB_MAXSTRINGLEN, UM_GC);
608 
609 		if (usba_device_struct.usb_mfg_str == NULL) {
610 			(void) strcpy(string_descr, "<No Manufacturer String>");
611 		} else {
612 			if (mdb_readstr(string_descr, USB_MAXSTRINGLEN,
613 			    (uintptr_t)usba_device_struct.usb_mfg_str) == -1) {
614 				mdb_warn("failed to read manufacturer "
615 				    "string descriptor");
616 				(void) strcpy(string_descr, "???");
617 			}
618 		}
619 		mdb_printf("\n    Manufacturer String:\t%s\n", string_descr);
620 
621 		if (usba_device_struct.usb_product_str == NULL) {
622 			(void) strcpy(string_descr, "<No Product String>");
623 		} else {
624 			if (mdb_readstr(string_descr, USB_MAXSTRINGLEN,
625 			    (uintptr_t)usba_device_struct.usb_product_str) ==
626 			    -1) {
627 				mdb_warn("failed to read product string "
628 				    "descriptor");
629 				(void) strcpy(string_descr, "???");
630 			}
631 		}
632 		mdb_printf("    Product String:\t\t%s\n", string_descr);
633 
634 		if (usba_device_struct.usb_serialno_str == NULL) {
635 			(void) strcpy(string_descr, "<No SerialNumber String>");
636 		} else {
637 			if (mdb_readstr(string_descr, USB_MAXSTRINGLEN,
638 			    (uintptr_t)usba_device_struct.usb_serialno_str) ==
639 			    -1) {
640 				mdb_warn("failed to read serial number string "
641 				    "descriptor");
642 				(void) strcpy(string_descr, "???");
643 			}
644 		}
645 		mdb_printf("    SerialNumber String:\t%s\n", string_descr);
646 
647 		if (no_driver_attached) {
648 			mdb_printf("\n");
649 		} else {
650 			mdb_printf("      state_p: ");
651 
652 			/*
653 			 * Given the dip, find the associated statep. The
654 			 * convention to generate this soft state anchor is:
655 			 *	<driver_name>_statep
656 			 */
657 			(void) mdb_snprintf(drv_statep, sizeof (drv_statep),
658 			    "%s_statep", dname);
659 			if (mdb_devinfo2statep(dip_addr, drv_statep,
660 			    &statep) == -1) {
661 				mdb_warn("failed to find %s state struct for "
662 				    "dip %p", drv_statep, dip_addr);
663 
664 				return (DCMD_ERR);
665 			}
666 			mdb_printf("%-?p\n", statep);
667 		}
668 
669 		config_cloud = (char **)mdb_alloc(sizeof (void *) *
670 		    usba_device_struct.usb_n_cfgs, UM_GC);
671 
672 		conf_str_descr = (char **)mdb_alloc(sizeof (void *) *
673 		    usba_device_struct.usb_n_cfgs, UM_GC);
674 
675 		if ((usba_device_struct.usb_cfg_array) &&
676 		    (usba_device_struct.usb_cfg_str_descr)) {
677 			if ((mdb_vread(config_cloud,  sizeof (void *) *
678 			    usba_device_struct.usb_n_cfgs,
679 			    (uintptr_t)usba_device_struct.usb_cfg_array) ==
680 			    -1) || (mdb_vread(conf_str_descr, sizeof (void *)
681 			    * usba_device_struct.usb_n_cfgs, (uintptr_t)
682 			    usba_device_struct.usb_cfg_str_descr)) == -1) {
683 
684 				mdb_warn("failed to read config cloud "
685 				    "pointers");
686 
687 			} else {
688 
689 				mdb_printf("\n    Device Config Clouds:\n"
690 				    "    Index\tConfig\t\tConfiguration "
691 				    "String\n"
692 				    "    -----\t------\t\t"
693 				    "--------------------\n");
694 
695 				for (i = 0; i < usba_device_struct.usb_n_cfgs;
696 				    i++) {
697 					if (mdb_readstr(string_descr,
698 					    USB_MAXSTRINGLEN,
699 					    (uintptr_t)conf_str_descr[i]) ==
700 					    -1) {
701 						(void) strcpy(string_descr,
702 						    "<No Configuration "
703 						    "String>");
704 					}
705 					mdb_printf("    %4d\t0x%p\t%s\n", i,
706 					    config_cloud[i], string_descr);
707 				}
708 			}
709 		}
710 
711 		mdb_printf("\n    Active configuration index: %d\n",
712 		    usba_device_struct.usb_active_cfg_ndx);
713 	}
714 
715 	if (usb_flag & USB_DUMP_ACTIVE_PIPES) {
716 
717 		if (mdb_pwalk_dcmd("usb_pipe_handle", "usb_pipe_handle",
718 		    0, NULL, addr) == -1) {
719 			mdb_warn("failed to walk usb_pipe_handle");
720 			return (DCMD_ERR);
721 		}
722 	}
723 
724 	return (DCMD_OK);
725 }
726 
727 
728 /*
729  * Dump the contents of the usba_debug_buf, from the oldest to newest,
730  * wrapping around if necessary.
731  */
732 /*ARGSUSED*/
733 int
734 usba_debug_buf(uintptr_t addr, uint_t flags, int argc, const mdb_arg_t *argv)
735 {
736 	char	*debug_buf_addr;	/* addr in core */
737 	char	*local_debug_buf;	/* local copy of buf */
738 	int	debug_buf_size;
739 	char	*term_p;
740 	int	being_cleared;
741 
742 	if (flags & DCMD_ADDRSPEC) {
743 
744 		return (DCMD_USAGE);
745 	}
746 
747 	if (mdb_readvar(&being_cleared, "usba_clear_debug_buf_flag") ==
748 	    -1) {
749 		mdb_warn("failed to read usba_clear_debug_buf_flag");
750 
751 		return (DCMD_ERR);
752 	}
753 	if (being_cleared) {
754 
755 		return (DCMD_OK);
756 	}
757 
758 	if (mdb_readvar(&debug_buf_addr, "usba_debug_buf") == -1) {
759 		mdb_warn("failed to read usba_debug_buf");
760 
761 		return (DCMD_ERR);
762 	}
763 
764 	if (debug_buf_addr == NULL) {
765 		mdb_warn("usba_debug_buf not allocated\n");
766 
767 		return (DCMD_OK);
768 	}
769 
770 
771 	if (mdb_readvar(&debug_buf_size, "usba_debug_buf_size") == -1) {
772 		mdb_warn("failed to read usba_debug_buf_size");
773 
774 		return (DCMD_ERR);
775 	}
776 
777 	debug_buf_size += USB_DEBUG_SIZE_EXTRA_ALLOC;
778 	local_debug_buf = (char *)mdb_alloc(debug_buf_size, UM_SLEEP | UM_GC);
779 
780 	if ((mdb_vread(local_debug_buf, debug_buf_size,
781 	    (uintptr_t)debug_buf_addr)) == -1) {
782 		mdb_warn("failed to read usba_debug_buf at %p",
783 		    local_debug_buf);
784 
785 		return (DCMD_ERR);
786 	}
787 	local_debug_buf[debug_buf_size - 1] = '\0';
788 
789 	if (strlen(local_debug_buf) == 0) {
790 
791 		return (DCMD_OK);
792 	}
793 
794 	if ((term_p = strstr(local_debug_buf, ">>>>")) == NULL) {
795 		mdb_warn("failed to find terminator \">>>>\"\n");
796 
797 		return (DCMD_ERR);
798 	}
799 
800 	/*
801 	 * Print the chunk of buffer from the terminator to the end.
802 	 * This will print a null string if no wrap has occurred yet.
803 	 */
804 	mdb_printf("%s", term_p+5);	/* after >>>>\0 to end of buf */
805 	mdb_printf("%s\n", local_debug_buf);	/* beg of buf to >>>>\0 */
806 
807 	return (DCMD_OK);
808 }
809 
810 /*ARGSUSED*/
811 int
812 usba_clear_debug_buf(
813 	uintptr_t addr, uint_t flags, int argc, const mdb_arg_t *argv)
814 {
815 	int clear = 1;
816 
817 	/* stop the tracing */
818 	if (mdb_writevar((void*)&clear, "usba_clear_debug_buf_flag") == -1) {
819 		mdb_warn("failed to set usba_clear_debug_buf_flag");
820 
821 		return (DCMD_ERR);
822 	}
823 
824 	return (DCMD_OK);
825 }
826 
827 /* prtusb entries */
828 extern int prtusb(uintptr_t, uint_t, int, const mdb_arg_t *);
829 
830 extern void prt_usb_usage(void);
831 
832 /*
833  * MDB module linkage information:
834  *
835  * We declare a list of structures describing our dcmds, and a function
836  * named _mdb_init to return a pointer to our module information.
837  */
838 static const mdb_dcmd_t dcmds[] = {
839 	{ "usb_pipe_handle", ":",
840 	    "print a usb_pipe_handle struct", usb_pipe_handle, NULL},
841 	{ "usba_device", ": [-pv]",
842 	    "print summary info for a usba_device_t struct", usba_device, NULL},
843 	{ "usba_debug_buf", NULL,
844 	    "print usba_debug_buf", usba_debug_buf, NULL},
845 	{ "usba_clear_debug_buf", NULL,
846 	    "clear usba_debug_buf", usba_clear_debug_buf, NULL},
847 	{ "prtusb", "?[-t] [-v] [-i index]",
848 	    "print trees and descriptors for usba_device_t",
849 	    prtusb, prt_usb_usage},
850 	{ NULL }
851 };
852 
853 static const mdb_walker_t walkers[] = {
854 	/* Generic list walker. */
855 	{ "usba_list_entry", "walk list of usba_list_entry_t structures",
856 	    usba_list_walk_init, usba_list_walk_step, NULL, NULL },
857 	{ "usb_pipe_handle", "walk USB pipe handles, given a usba_device_t ptr",
858 	    usb_pipe_handle_walk_init, usb_pipe_handle_walk_step, NULL, NULL },
859 	{ "usba_device", "walk global list of usba_device_t structures",
860 	    usba_device_walk_init, usba_list_walk_step, NULL, NULL },
861 	{ "hubd", "walk hubd instances", usba_hubd_walk_init,
862 	    usba_hubd_walk_step, NULL, NULL },
863 	{ NULL }
864 };
865 
866 static const mdb_modinfo_t modinfo = {
867 	MDB_API_VERSION, dcmds, walkers
868 };
869 
870 const mdb_modinfo_t *
871 _mdb_init(void)
872 {
873 	return (&modinfo);
874 }
875