1#!/usr/bin/perl -w 2# 3# CDDL HEADER START 4# 5# The contents of this file are subject to the terms of the 6# Common Development and Distribution License (the "License"). 7# You may not use this file except in compliance with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23# Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved. 24# Copyright 2019 Joyent, Inc. 25# 26# 27# tester - run logadm tests 28# 29# requires a <bindir> argument to say where the various logadm 30# binaries live (conftest, globtest, kwtest, luttest, optstest, and 31# logadm itself). 32# 33# to run all the tests: 34# tester [-f] <bindir> 35# 36# to run just a few tests, given their names: 37# tester [-f] <bindir> globtest1 luttest1 38# 39# to setup a test and stop so you can run it by hand: 40# tester [-f] -s globtest1 <bindir> 41# 42# tester will tell you what tmp directory it created for 43# the test. to run it, cd there and run: 44# sh runtest 45# to check the results, run: 46# sh checktest 47# 48# -f means "fast" -- without it, watchmalloc(3MALLOC) is setup for 49# each test and they run a zillion times slower and produce core 50# dumps when malloc/free problems are detected. 51# 52$watchmalloc=1; # default is to use watchmalloc 53${ENV} = "/bin"; 54umask 002; 55 56# list of tests we run by default 57@tests = ( 58 "conftest1", 59 "conftest2", 60 "globtest1", 61 "globtest2", 62 "kwtest1", 63 "kwtest2", 64 "luttest1", 65 "optstest1", 66 "optstest2", 67 "logadmV1", 68 "logadmV2", 69 "logadmr", 70 "logadmw", 71 "logadm1", 72 "logadm1c", 73 "logadm2", 74 "logadm3", 75 "logadm4", 76 "logadm5", 77 "logadm6", 78 "logadm7", 79 "logadm8", 80 "logadm9", 81 "logadm9d", 82 "logadm10", 83 "logadm11", 84 "logadm12", 85 "logadm13", 86 "logadm14", 87 "logadm15", 88 "logadm16", 89 "logadm17", 90 "logadm18", 91 "logadm19", 92 "logadm20", 93 "logadm21", 94 "logadm22", 95 "logadm23", 96 "stderr1" 97); 98 99use Getopt::Std; 100use File::Find; 101 102$usage_summary = '[-s test-name] [-d dir] bindir [test-name...]'; 103$usage_getopts = 'fd:s:'; 104%usage = ( 105 d=>'use dir for tests rather than creating one in /tmp', 106 s=>'setup only, do not run test'); 107 108# spew usage message, plus any given message, and exit 109sub usage { 110 my $msg = shift; 111 112 if ($msg) { 113 chomp $msg; 114 warn "$0: $msg\n" if $msg; 115 } 116 warn "Usage: $0 $usage_summary\n"; 117 foreach (sort keys %usage) { 118 warn " -$_ $usage{$_}\n"; 119 } 120 exit 1; 121} 122 123# 124# basic argument processing 125# 126$myname = $0; 127$myname =~ s/.*\///; # just show last component in error mesages 128getopts($usage_getopts) or usage; 129$bindir = shift or usage; 130usage("$bindir does not exist") unless -d $bindir; 131usage("cannot list more than one test with -s option") if $opt_s && @ARGV; 132@tests = @ARGV if @ARGV; 133print "Fast mode\n" if $opt_f; 134$watchmalloc = 0 if $opt_f; 135 136$mydir=`pwd`; 137chomp $mydir; 138 139$dir = $opt_d; 140$dir = "/tmp/logadmtest$$" unless $dir = $opt_d; 141 142if (!-d $dir) { 143 mkdir $dir, 0777 or die "$myname: mkdir $dir: $!\n"; 144 $needrmdir = 1; 145} 146 147chdir $dir or die "$myname: $dir: $!\n"; 148 149# common commands in runtest by tests 150if ($watchmalloc) { 151 $envsetup = 152 "HOME=$dir export HOME; " . 153 "LD_PRELOAD=watchmalloc.so.1 export LD_PRELOAD; " . 154 "MALLOC_DEBUG=RW export MALLOC_DEBUG"; 155} else { 156 $envsetup = "HOME=$dir export HOME; "; 157} 158 159$| = 1; # a.k.a. setbuf(stdout, NULL) 160 161if ($opt_s) { 162 # 163 # just setup the test, explain how to use it, and exit 164 # 165 $testname = $opt_s; 166 eval "&$opt_s"; 167 die "$myname: ERROR: $@" if $@; 168 print "$myname: $testname setup complete, to run, cd to:\n"; 169 print " $dir\n"; 170 print "and run the command:\n"; 171 print " sh runtest\n"; 172 print "to check the results, run the command:\n"; 173 print " sh checktest\n"; 174 exit 0; 175} else { 176 # 177 # run all the tests 178 # 179 foreach (@tests) { 180 $testname = $_; 181 print "Running $testname..."; 182 eval "&$_"; 183 if ($@) { 184 print " SETUP FAILURE\n"; 185 print STDERR "$myname: ERROR: $@"; 186 exit 1; 187 } 188 eval "runner('runtest')"; 189 if ($@) { 190 print " RUNTEST FAILURE\n"; 191 print STDERR "$myname: ERROR: $@"; 192 print STDERR "results captured in directory $dir\n"; 193 print STDERR " or use: $myname -s $testname $bindir\n"; 194 print STDERR " to do a fresh setup of this test.\n"; 195 exit 1; 196 } 197 eval "runner('checktest', '-x', '> checktest.out 2>&1')"; 198 if ($@) { 199 print " CHECKTEST FAILURE\n"; 200 print STDERR "$myname: ERROR: $@"; 201 print STDERR "results captured in file $dir/checktest.out\n"; 202 print STDERR " or use: $myname -s $testname $bindir\n"; 203 print STDERR " to do a fresh setup of this test.\n"; 204 exit 1; 205 } 206 print "pass\n"; 207 # sanity... 208 die "unexpected dir $dir" unless $dir =~ m,/.+/,; 209 system("/bin/rm -rf $dir/*"); 210 } 211} 212 213# if we were the ones who created $dir, remove it 214if ($needrmdir) { 215 chdir $mydir; 216 rmdir $dir || die "$myname: rmdir $dir: $!\n"; 217} 218 219exit 0; 220 221# 222# run a shell script and check for failure 223# 224# the shell scripts generated by this program always "exec" the binary 225# under test so checking here are for exit code, signals, and core dump 226# is actually checking the program under test and not /bin/sh 227# 228sub runner { 229 my ($cmd, $prefix, $suffix) = (@_, '', ''); 230 231 my $fullcmd = "/bin/sh $prefix $cmd $suffix"; 232 my $rc = 0xffff & system("$fullcmd"); 233 234 if ($rc == 0) { 235 return; # cmd completed normally 236 } elsif ($rc == 0xff00) { 237 die "command \"$cmd\" failed: $!\n"; 238 } elsif (($rc & 0xff) == 0) { 239 $rc >>= 8; 240 die "command \"$cmd\" exit $rc\n"; 241 } else { 242 my $coremsg; 243 $coremsg = " (core dumped)" if ($rc & 0x80); 244 $rc &= ~0x80; 245 die "command \"$cmd\" signal $rc$coremsg\n" ; 246 } 247} 248 249# 250# set_file(filename [, contents]) -- create a file, optionally with contents 251# 252sub set_file { 253 my $file = shift; 254 my $contents = shift; 255 256 open SF, ">$file" or die "create \"$file\": $!\n"; 257 print SF $contents if defined($contents); 258 close SF; 259} 260 261############# 262############# 263############# THE TESTS START AFTER HERE... 264############# 265############# 266 267# common setup step -- create a testfile.conf 268sub set_testconffile { 269 my $fname = shift; 270 $fname = 'testfile.conf' unless defined($fname); 271 272 set_file($fname, <<'EOF'); 273# 274# logadm.conf 275# 276# Default settings for system log file management. 277# The -w option to logadm(1M) is the preferred way to write to this file, 278# but if you do edit it by hand, use "logadm -V" to check it for errors. 279# 280# The format of lines in this file is: 281# <logname> <options> 282# For each logname listed here, the default options to logadm 283# are given. Options given on the logadm command line override 284# the defaults contained in this file. 285# 286# logadm typically runs early every morning via an entry in 287# root's crontab (see crontab(1)). 288# 289/var/adm/messages -C 4 -P 'Thu Nov 1 16:56:42 2001' -a 'kill -HUP `cat /var/run/*syslog*pid`' 290/var/cron/log -s 512k -t /var/cron/olog 291/var/lp/logs/lpsched -C 2 -N -t '$file.$N' 292# 293# The entry below is used by turnacct(1M) 294# 295/var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 296apache -C 24 -a '/usr/apache/bin/apachectl graceful' -p 1m -t '/var/apache/old-logs/$basename.%Y-%m' '/var/apache/logs/*{access,error}_log' 297/var/log/syslog -C 8 -P 'Thu Nov 1 09:16:38 2001' -a 'kill -HUP `cat /var/run/*syslog*pid`' 298/var/apache/logs/access_log -P 'Thu Nov 1 08:27:56 2001' 299/var/apache/logs/error_log -P 'Thu Nov 1 08:27:56 2001' 300/var/apache/logs/suexec_log -P 'Thu Nov 1 08:27:56 2001' 301/var/apache/logs/mod_jserv.log -P 'Thu Nov 1 08:27:56 2001' 302/var/apache/logs/jserv.log -P 'Thu Nov 1 08:27:56 2001' 303EOF 304} 305 306 307########################################################################### 308# 309# conftest1 -- minimal basic test of the conf.c code 310# 311########################################################################### 312sub conftest1 { 313 set_testconffile; 314 315 set_file('checktest', <<'EOF'); 316[ -s std.err ] && { cat std.err; exit 1; } 317/bin/sed '/^conffile <testfile.conf>:$/d' <std.out >sed.out 318exec /bin/diff testfile.conf sed.out 319EOF 320 321 set_file('runtest', <<"EOF"); 322# test "conftest1" 323$envsetup 324exec $bindir/conftest testfile.conf >std.out 2>std.err 325EOF 326} 327 328########################################################################### 329# 330# conftest2 -- error path through conf.c 331# 332########################################################################### 333sub conftest2 { 334 set_file('testfile.conf', 'line fragment'); 335 336 set_file('std.err.expect', <<'EOF'); 337conftest: Warning: file testfile.conf doesn't end with newline, last line ignored. 338EOF 339 340 set_file('checktest', <<'EOF'); 341exec /bin/diff std.err.expect std.err 342EOF 343 344 set_file('runtest', <<"EOF"); 345# test "conftest2" 346$envsetup 347$bindir/conftest testfile.conf >std.out 2>std.err || exit 0 348exit 1 349EOF 350} 351 352########################################################################### 353# 354# globtest1 -- minimal basic test of the glob.c code 355# 356########################################################################### 357sub globtest1 { 358 set_file('fileBname12'); 359 sleep 2; # ensure above name is odler than below name 360 set_file('fileAname12'); 361 set_file('fileAname1'); 362 set_file('fileAname3'); 363 set_file('fileAname5'); 364 set_file('fileAname7'); 365 set_file('fileAname9'); 366 set_file('fileAname11'); 367 set_file('fileBname0'); 368 set_file('fileBname2'); 369 set_file('fileBname4'); 370 set_file('fileBname6'); 371 set_file('fileBname8'); 372 set_file('fileBname10'); 373 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 374 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 375 mkdir 'dir3', 0777 or die "mkdir dir3: $!\n"; 376 mkdir 'dir1/dirA', 0777 or die "mkdir dir1/dirA: $!\n"; 377 mkdir 'dir1/dirB', 0777 or die "mkdir dir1/dirB: $!\n"; 378 mkdir 'dir1/dirC', 0777 or die "mkdir dir1/dirC: $!\n"; 379 mkdir 'dir2/dirA', 0777 or die "mkdir dir2/dirA: $!\n"; 380 mkdir 'dir2/dirB', 0777 or die "mkdir dir2/dirB: $!\n"; 381 mkdir 'dir2/dirC', 0777 or die "mkdir dir2/dirC: $!\n"; 382 set_file('dir1/fileAname1'); 383 set_file('dir1/fileAname2'); 384 set_file('dir1/fileAname3'); 385 set_file('dir1/fileAname4'); 386 set_file('dir1/fileAname5'); 387 set_file('dir1/fileBname1'); 388 set_file('dir1/fileBname2'); 389 set_file('dir1/fileBname3'); 390 set_file('dir1/fileBname4'); 391 set_file('dir1/fileBname5'); 392 # supply some varying sizes to produce different total size values 393 set_file('dir1/dirA/fileAname4', '4444'); 394 sleep 2; # ensure above file is oldest in dirA 395 set_file('dir1/dirA/fileAname1', '1'); 396 set_file('dir1/dirA/fileAname2', '22'); 397 set_file('dir1/dirA/fileAname3', '333'); 398 set_file('dir1/dirA/fileAname5', '55555'); 399 set_file('dir1/dirA/fileBname1', '1'); 400 set_file('dir1/dirA/fileBname2', '22'); 401 set_file('dir1/dirA/fileBname3', '333'); 402 set_file('dir1/dirA/fileBname4', '4444'); 403 set_file('dir1/dirA/fileBname5', '55555'); 404 set_file('dir1/dirB/fileAname1', '1'); 405 set_file('dir1/dirB/fileAname2', '22'); 406 set_file('dir1/dirB/fileAname3', '333'); 407 set_file('dir1/dirB/fileAname4', '4444'); 408 set_file('dir1/dirB/fileAname5', '55555'); 409 set_file('dir1/dirB/fileBname1', '1'); 410 set_file('dir1/dirB/fileBname2', '22'); 411 set_file('dir1/dirB/fileBname3', '333'); 412 set_file('dir1/dirB/fileBname4', '4444'); 413 set_file('dir1/dirB/fileBname5', '55555'); 414 set_file('dir1/dirC/fileAname10', '12345678901'); 415 set_file('dir1/dirC/fileAname20', '123456789022'); 416 set_file('dir1/dirC/fileAname30', '1234567890333'); 417 set_file('dir1/dirC/fileAname40', '12345678904444'); 418 set_file('dir1/dirC/fileAname50', '123456789055555'); 419 set_file('dir1/dirC/fileBname10', '12345678901'); 420 set_file('dir1/dirC/fileBname20', '123456789022'); 421 set_file('dir1/dirC/fileBname30', '1234567890333'); 422 set_file('dir1/dirC/fileBname40', '12345678904444'); 423 set_file('dir1/dirC/fileBname50', '123456789055555'); 424 425 set_file('std.out.expect', <<'EOF'); 426<file{A,B,C}name*>: 427 <./fileAname12> 428 <./fileAname1> 429 <./fileAname3> 430 <./fileAname5> 431 <./fileAname7> 432 <./fileAname9> 433 <./fileAname11> 434 <./fileBname12> 435 <./fileBname0> 436 <./fileBname2> 437 <./fileBname4> 438 <./fileBname6> 439 <./fileBname8> 440 <./fileBname10> 441total size: 0 442 oldest <./fileBname12> 443 oldest <./fileBname8> 444 oldest <./fileBname6> 445 oldest <./fileBname4> 446 oldest <./fileBname2> 447 oldest <./fileBname10> 448 oldest <./fileBname0> 449 oldest <./fileAname9> 450 oldest <./fileAname7> 451 oldest <./fileAname5> 452 oldest <./fileAname3> 453 oldest <./fileAname12> 454 oldest <./fileAname11> 455 oldest <./fileAname1> 456<file{A,B,C}name>: 457 <fileAname> 458 <fileBname> 459 <fileCname> 460total size: 0 461 oldest <fileCname> 462 oldest <fileBname> 463 oldest <fileAname> 464<dir1/dirA/file*>: 465 <./dir1/dirA/fileAname4> 466 <./dir1/dirA/fileAname1> 467 <./dir1/dirA/fileAname2> 468 <./dir1/dirA/fileAname3> 469 <./dir1/dirA/fileAname5> 470 <./dir1/dirA/fileBname1> 471 <./dir1/dirA/fileBname2> 472 <./dir1/dirA/fileBname3> 473 <./dir1/dirA/fileBname4> 474 <./dir1/dirA/fileBname5> 475total size: 30 476 oldest <./dir1/dirA/fileAname4> 477 oldest <./dir1/dirA/fileBname5> 478 oldest <./dir1/dirA/fileBname4> 479 oldest <./dir1/dirA/fileBname3> 480 oldest <./dir1/dirA/fileBname2> 481 oldest <./dir1/dirA/fileBname1> 482 oldest <./dir1/dirA/fileAname5> 483 oldest <./dir1/dirA/fileAname3> 484 oldest <./dir1/dirA/fileAname2> 485 oldest <./dir1/dirA/fileAname1> 486<dir[13]/[e-z]*>: 487 <./dir1/fileAname1> 488 <./dir1/fileAname2> 489 <./dir1/fileAname3> 490 <./dir1/fileAname4> 491 <./dir1/fileAname5> 492 <./dir1/fileBname1> 493 <./dir1/fileBname2> 494 <./dir1/fileBname3> 495 <./dir1/fileBname4> 496 <./dir1/fileBname5> 497total size: 0 498 oldest <./dir1/fileBname5> 499 oldest <./dir1/fileBname4> 500 oldest <./dir1/fileBname3> 501 oldest <./dir1/fileBname2> 502 oldest <./dir1/fileBname1> 503 oldest <./dir1/fileAname5> 504 oldest <./dir1/fileAname4> 505 oldest <./dir1/fileAname3> 506 oldest <./dir1/fileAname2> 507 oldest <./dir1/fileAname1> 508<dir?/dir[AC]/fileBname[2-9]>: 509 <./dir1/dirA/fileBname2> 510 <./dir1/dirA/fileBname3> 511 <./dir1/dirA/fileBname4> 512 <./dir1/dirA/fileBname5> 513total size: 14 514 oldest <./dir1/dirA/fileBname5> 515 oldest <./dir1/dirA/fileBname4> 516 oldest <./dir1/dirA/fileBname3> 517 oldest <./dir1/dirA/fileBname2> 518<file[A-Z]n.*e([0-9]+)$0>: 519 <./fileBname12> 520 <./fileAname12> 521 <./fileAname1> 522 <./fileAname3> 523 <./fileAname5> 524 <./fileAname7> 525 <./fileAname9> 526 <./fileAname11> 527 <./fileBname0> 528 <./fileBname2> 529 <./fileBname4> 530 <./fileBname6> 531 <./fileBname8> 532 <./fileBname10> 533total size: 0 534 oldest <./fileBname12> 535 oldest <./fileAname12> 536 oldest <./fileAname11> 537 oldest <./fileBname10> 538 oldest <./fileAname9> 539 oldest <./fileBname8> 540 oldest <./fileAname7> 541 oldest <./fileBname6> 542 oldest <./fileAname5> 543 oldest <./fileBname4> 544 oldest <./fileAname3> 545 oldest <./fileBname2> 546 oldest <./fileAname1> 547 oldest <./fileBname0> 548EOF 549 550 set_file('checktest', <<'EOF'); 551[ -s std.err ] && { cat std.err; exit 1; } 552exec /bin/diff std.out.expect std.out 553EOF 554 555 $testglobs='\'file{A,B,C}name*\' \'file{A,B,C}name\' \'dir1/dirA/file*\' \'dir[13]/[e-z]*\' \'dir?/dir[AC]/fileBname[2-9]\' -r \'file[A-Z]n.*e([0-9]+)$0\''; 556 557 set_file('runtest', <<"EOF"); 558# test "globtest1" 559$envsetup 560exec $bindir/globtest $testglobs >std.out 2>std.err 561EOF 562} 563 564########################################################################### 565# 566# globtest2 -- error path through glob.c 567# 568########################################################################### 569sub globtest2 { 570 set_file('std.err.expect', <<'EOF'); 571globtest: Error: Missing } 572EOF 573 574 set_file('checktest', <<'EOF'); 575exec /bin/diff std.err.expect std.err 576EOF 577 578 set_file('runtest', <<"EOF"); 579# test "globtest2" 580$envsetup 581$bindir/globtest 'hello{there' >std.out 2>std.err || exit 0 582exit 1 583EOF 584} 585 586########################################################################### 587# 588# kwtest1 -- minimal basic test of the kw.c code 589# 590########################################################################### 591sub kwtest1 { 592 $domainname = `/bin/domainname`; chomp $domainname; 593 $isa = `/bin/uname -p`; chomp $isa; 594 $platform = `/bin/uname -i`; chomp $platform; 595 $nodename = `/bin/uname -n`; chomp $nodename; 596 $machine = `/bin/uname -m`; chomp $machine; 597 $release = `/bin/uname -r`; chomp $release; 598 # /bin/zonename is in SUNWzoneu and so may not be present 599 if (-f "/bin/zonename") { 600 $zonename = `/bin/zonename`; chomp $zonename; 601 } else { 602 $zonename = "global"; 603 } 604$secondblob=<<'EOF'; 605expand<$file.$n> n -1 hasn 1 result </var/log/syslog\.([0-9]+)$0> 606expand<$file.$n> n 0 hasn 1 result </var/log/syslog.0> 607expand<$file.$n> n 1 hasn 1 result </var/log/syslog.1> 608expand<moose%d.$n> n -1 hasn 1 result <moose[0-9]+\.([0-9]+)$0> 609expand<moose%d.$n> n 0 hasn 1 result <moose%d.0> 610expand<moose%d.$n> n 1 hasn 1 result <moose%d.1> 611expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n -1 hasn 1 result </var/logs-[0-9]+/moose-ISAporklips[0-9]+\.([0-9]+)$0> 612expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n 0 hasn 1 result </var/logs-%Y/moose-ISAporklips%d.0> 613expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n 1 hasn 1 result </var/logs-%Y/moose-ISAporklips%d.1> 614EOF 615 $percentd = `/bin/env TZ=UTC /bin/date +%d`; chomp $percentd; 616 $percentY = `/bin/env TZ=UTC /bin/date +%Y`; chomp $percentY; 617 $secondblob =~ s/%d/$percentd/mg; 618 $secondblob =~ s/%Y/$percentY/mg; 619 $secondblob =~ s/ISA/$isa/mg; 620 $utcenv = "TZ=UTC export TZ"; 621 chomp $secondblob; 622 set_file('sed.out.expect', <<"EOF"); 623 basename syslog 624 dirname /var/log 625 domain $domainname 626 file /var/log/syslog 627 home $dir 628 isa $isa 629 logname $ENV{LOGNAME} 630 machine $machine 631 nfile 632 nodename $nodename 633 platform $platform 634 release $release 635 user $ENV{USER} 636 zonename $zonename 637$secondblob 638EOF 639 640 set_file('checktest', <<'EOF'); 641[ -s std.err ] && { cat std.err; exit 1; } 642/bin/sed -e '/^ *secs [0-9][0-9]*$/d'\ 643 -e "s/%d/`/bin/env TZ=UTC /bin/date +%d`/g"\ 644 -e "s/%Y/`/bin/env TZ=UTC /bin/date +%Y`/g"\ 645 <std.out >sed.out 646exec /bin/diff sed.out.expect sed.out 647EOF 648 649 $kwtest='kwtest /var/log/syslog \'$file.$n\' \'moose%d.$n\' \'/var/logs-%Y/moose-$isa$#porklips%d.$n\''; 650 set_file('runtest', <<"EOF"); 651# test "kwtest1" 652$envsetup 653$utcenv 654exec $bindir/$kwtest >std.out 2>std.err 655EOF 656} 657 658########################################################################### 659# 660# kwtest2 -- NULL environment variables test of the kw.c code 661# 662########################################################################### 663sub kwtest2 { 664 $domainname = `/bin/domainname`; chomp $domainname; 665 $isa = `/bin/uname -p`; chomp $isa; 666 $platform = `/bin/uname -i`; chomp $platform; 667 $nodename = `/bin/uname -n`; chomp $nodename; 668 $machine = `/bin/uname -m`; chomp $machine; 669 $release = `/bin/uname -r`; chomp $release; 670 # /bin/zonename is in SUNWzoneu and so may not be present 671 if (-f "/bin/zonename") { 672 $zonename = `/bin/zonename`; chomp $zonename; 673 } else { 674 $zonename = "global"; 675 } 676$secondblob=<<'EOF'; 677expand<$file.$n> n -1 hasn 1 result </var/log/syslog\.([0-9]+)$0> 678expand<$file.$n> n 0 hasn 1 result </var/log/syslog.0> 679expand<$file.$n> n 1 hasn 1 result </var/log/syslog.1> 680expand<moose%d.$n> n -1 hasn 1 result <moose[0-9]+\.([0-9]+)$0> 681expand<moose%d.$n> n 0 hasn 1 result <moose%d.0> 682expand<moose%d.$n> n 1 hasn 1 result <moose%d.1> 683expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n -1 hasn 1 result </var/logs-[0-9]+/moose-ISAporklips[0-9]+\.([0-9]+)$0> 684expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n 0 hasn 1 result </var/logs-%Y/moose-ISAporklips%d.0> 685expand</var/logs-%Y/moose-$isa$#porklips%d.$n> n 1 hasn 1 result </var/logs-%Y/moose-ISAporklips%d.1> 686EOF 687 $percentd = `/bin/env TZ=UTC /bin/date +%d`; chomp $percentd; 688 $percentY = `/bin/env TZ=UTC /bin/date +%Y`; chomp $percentY; 689 $secondblob =~ s/%d/$percentd/mg; 690 $secondblob =~ s/%Y/$percentY/mg; 691 $secondblob =~ s/ISA/$isa/mg; 692 chomp $secondblob; 693 set_file('sed.out.expect', <<"EOF"); 694 basename syslog 695 dirname /var/log 696 domain $domainname 697 file /var/log/syslog 698 home 699 isa $isa 700 logname 701 machine $machine 702 nfile 703 nodename $nodename 704 platform $platform 705 release $release 706 user 707 zonename $zonename 708$secondblob 709EOF 710 711 set_file('checktest', <<'EOF'); 712[ -s std.err ] && { cat std.err; exit 1; } 713/bin/sed -e '/^ *secs [0-9][0-9]*$/d'\ 714 -e "s/%d/`/bin/env TZ=UTC /bin/date +%d`/g"\ 715 -e "s/%Y/`/bin/env TZ=UTC /bin/date +%Y`/g"\ 716 <std.out >sed.out 717exec /bin/diff sed.out.expect sed.out 718EOF 719 720 $kwtest='kwtest /var/log/syslog \'$file.$n\' \'moose%d.$n\' \'/var/logs-%Y/moose-$isa$#porklips%d.$n\''; 721 set_file('runtest', <<"EOF"); 722# test "kwtest2" 723$envsetup 724LOGNAME= 725export LOGNAME 726HOME= 727export HOME 728USER= 729export USER 730TZ=UTC 731export TZ 732exec $bindir/$kwtest >std.out 2>std.err 733EOF 734} 735 736########################################################################### 737# 738# luttest1 -- minimal basic test of the lut.c code 739# 740########################################################################### 741sub luttest1 { 742 set_file('std.out.expect', <<'EOF'); 743lut contains: 744<fix> <NULL> (<NULL>) 745<one> <two> (<two>) 746<seven> <eight> (<eight>) 747<six> <NULL> (<NULL>) 748<three> <four> (<four>) 749dup lut contains: 750<fix> <NULL> (<NULL>) 751<one> <two> (<two>) 752<seven> <eight> (<eight>) 753<six> <NULL> (<NULL>) 754<three> <four> (<four>) 755EOF 756 757 set_file('checktest', <<'EOF'); 758[ -s std.err ] && { cat std.err; exit 1; } 759exec /bin/diff std.out.expect std.out 760EOF 761 762 set_file('runtest', <<"EOF"); 763# test "luttest1" 764$envsetup 765exec $bindir/luttest one=two three=four fix six seven=eight >std.out 2>std.err 766EOF 767} 768 769########################################################################### 770# 771# optstest1 -- minimal basic test of the opts.c code 772# 773########################################################################### 774sub optstest1 { 775 $options="-a -b moose -c 1h -d 'Fri Nov 2 13:19:55 2001' -e 1k -f 2 one two three"; 776 set_file('std.out.expect', <<"EOF"); 777options: $options 778EOF 779 780 set_file('checktest', <<'EOF'); 781[ -s std.err ] && { cat std.err; exit 1; } 782exec /bin/diff std.out.expect std.out 783EOF 784 785 set_file('runtest', <<"EOF"); 786# test "optstest1" 787$envsetup 788exec $bindir/optstest $options >std.out 2>std.err 789EOF 790} 791 792########################################################################### 793# 794# optstest2 -- error path through opts.c code 795# 796########################################################################### 797sub optstest2 { 798 $options="-a -b -c 1h -d 'Fri Nov 2 13:19:55 2001' -e 1k -f 2 one two three"; 799 set_file('std.err.expect', <<'EOF'); 800optstest: Error: Option 'b' requires an argument 801optstest: Error: opts parsing failed 802EOF 803 804 set_file('checktest', <<'EOF'); 805[ -s std.out ] && exit 1 806exec /bin/diff std.err.expect std.err 807EOF 808 809 set_file('runtest', <<"EOF"); 810# test "optstest2" 811$envsetup 812$bindir/optstest $options >std.out 2>std.err || exit 0 813exit 1 814EOF 815} 816 817########################################################################### 818# 819# logadmV1 -- test of "logadm -V" 820# 821########################################################################### 822sub logadmV1 { 823 set_testconffile; 824 825 set_file('std.out.expect', <<'EOF'); 826/var/adm/messages -C 4 -P 'Thu Nov 1 16:56:42 2001' -a 'kill -HUP `cat /var/run/*syslog*pid`' 827/var/cron/log -s 512k -t /var/cron/olog 828/var/lp/logs/lpsched -C 2 -N -t '$file.$N' 829/var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 830apache -C 24 -a '/usr/apache/bin/apachectl graceful' -p 1m -t '/var/apache/old-logs/$basename.%Y-%m' '/var/apache/logs/*{access,error}_log' 831/var/log/syslog -C 8 -P 'Thu Nov 1 09:16:38 2001' -a 'kill -HUP `cat /var/run/*syslog*pid`' 832/var/apache/logs/access_log -P 'Thu Nov 1 08:27:56 2001' 833/var/apache/logs/error_log -P 'Thu Nov 1 08:27:56 2001' 834/var/apache/logs/suexec_log -P 'Thu Nov 1 08:27:56 2001' 835/var/apache/logs/mod_jserv.log -P 'Thu Nov 1 08:27:56 2001' 836/var/apache/logs/jserv.log -P 'Thu Nov 1 08:27:56 2001' 837EOF 838 839 set_file('checktest', <<'EOF'); 840[ -s std.err ] && { cat std.err; exit 1; } 841exec /bin/diff std.out.expect std.out 842EOF 843 844 set_file('runtest', <<"EOF"); 845# test "logadmV1" 846$envsetup 847exec $bindir/logadm -f testfile.conf -F testfile.conf -V >std.out 2>std.err 848EOF 849} 850 851########################################################################### 852# 853# logadmV2 -- test of "logadm -V <entry>" 854# 855########################################################################### 856sub logadmV2 { 857 set_testconffile; 858 859 set_file('std.out.expect', <<'EOF'); 860/var/cron/log -s 512k -t /var/cron/olog 861/var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 862EOF 863 864 set_file('checktest', <<'EOF'); 865[ -s std.err ] && { cat std.err; exit 1; } 866exec /bin/diff std.out.expect std.out 867EOF 868 869 set_file('runtest', <<"EOF"); 870# test "logadmV2" 871$envsetup 872exec $bindir/logadm -f testfile.conf -F testfile.conf -V /var/cron/log /var/adm/pacct >std.out 2>std.err 873EOF 874} 875 876########################################################################### 877# 878# logadmr -- test of "logadm -r <entry>" 879# 880########################################################################### 881sub logadmr { 882 set_testconffile; 883 set_testconffile('testfile.conf.orig'); 884 885 set_file('diff.out.expect', <<'EOF'); 88618d17 887< /var/cron/log -s 512k -t /var/cron/olog 88823d21 889< /var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 890EOF 891 892 set_file('checktest', <<'EOF'); 893[ -s std.err ] && { cat std.err; exit 1; } 894/bin/diff testfile.conf.orig testfile.conf > diff.out 895exec /bin/diff diff.out.expect diff.out 896EOF 897 898 set_file('runtest', <<"EOF"); 899# test "logadmr" 900$envsetup 901exec $bindir/logadm -f testfile.conf -F testfile.conf -r /var/cron/log /var/adm/pacct >std.out 2>std.err 902EOF 903} 904 905########################################################################### 906# 907# logadmw -- test of "logadm -w <entry>" 908# 909########################################################################### 910sub logadmw { 911 set_testconffile; 912 set_testconffile('testfile.conf.orig'); 913 914 set_file('diff.out.expect', <<'EOF'); 91530a31 916> moose -C 20 -a moose_after_cmd -g pig -m 664 -o cow -p never /moose/file 917EOF 918 919 set_file('checktest', <<'EOF'); 920[ -s std.err ] && { cat std.err; exit 1; } 921/bin/diff testfile.conf.orig testfile.conf > diff.out 922exec /bin/diff diff.out.expect diff.out 923EOF 924 925 set_file('runtest', <<"EOF"); 926# test "logadmw" 927$envsetup 928exec $bindir/logadm -f testfile.conf -F testfile.conf -w moose -C 20 -a moose_after_cmd -g pig -m 664 -o cow -p never /moose/file >std.out 2>std.err 929EOF 930} 931 932########################################################################### 933# 934# logadm1 -- minimal basic test of logadm rotation 935# 936########################################################################### 937sub logadm1 { 938 set_file('logfile', 'initially logfile'); 939 set_file('logfile.0', 'initially logfile.0'); 940 my ($stdev, $stino, $stmode, $stnlink, $stuid, $stgid, $strdev, 941 $stsize, $statime, $stmtime, $stctime, $stblksize, $stblocks) = 942 lstat 'logfile' or die "lstat logfile: $!\n"; 943 944 set_file('checktest', <<"EOF"); 945[ -s std.err ] && { cat std.err; exit 1; } 946[ -s std.out ] && exit 1 947[ -s logfile ] && exit 1 948[ -f logfile.0 ] || exit 1 949[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 950[ "`/bin/ls -i logfile.0 | /bin/awk '{ print \$1; }'`" = "$stino" ] || exit 1 951[ -f logfile.1 ] || exit 1 952[ "xinitially logfile.0" = "x`/bin/cat logfile.1`" ] || exit 1 953exit 0 954EOF 955 956 set_file('runtest', <<"EOF"); 957# test "logadm1" 958$envsetup 959exec $bindir/logadm -f /dev/null -p now logfile >std.out 2>std.err 960EOF 961} 962 963########################################################################### 964# 965# logadm1c -- same as logadm1 but with -c option 966# 967########################################################################### 968sub logadm1c { 969 set_file('logfile', 'initially logfile'); 970 set_file('logfile.0', 'initially logfile.0'); 971 my ($stdev, $stino, $stmode, $stnlink, $stuid, $stgid, $strdev, 972 $stsize, $statime, $stmtime, $stctime, $stblksize, $stblocks) = 973 lstat 'logfile' or die "lstat logfile: $!\n"; 974 975 set_file('checktest', <<"EOF"); 976[ -s std.err ] && { cat std.err; exit 1; } 977[ -s std.out ] && exit 1 978[ -s logfile ] && exit 1 979[ -f logfile.0 ] || exit 1 980[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 981[ "`/bin/ls -i logfile.0 | /bin/awk '{ print \$1; }'`" = "$stino" ] && exit 1 982[ -f logfile.1 ] || exit 1 983[ "xinitially logfile.0" = "x`/bin/cat logfile.1`" ] || exit 1 984exit 0 985EOF 986 987 set_file('runtest', <<"EOF"); 988# test "logadm1c" 989$envsetup 990exec $bindir/logadm -f /dev/null -p now -c logfile >std.out 2>std.err 991EOF 992} 993 994########################################################################### 995# 996# logadm2 -- minimal basic test of logadm expiration 997# 998########################################################################### 999sub logadm2 { 1000 set_file('logfile', 'initially logfile'); 1001 set_file('logfile.0', 'initially logfile.0'); 1002 set_file('logfile.1', 'initially logfile.1'); 1003 1004 set_file('checktest', <<'EOF'); 1005[ -s std.err ] && { cat std.err; exit 1; } 1006[ -s std.out ] && exit 1 1007[ -s logfile ] && exit 1 1008[ -f logfile.0 ] || exit 1 1009[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 1010[ -f logfile.1 ] || exit 1 1011[ "xinitially logfile.0" = "x`/bin/cat logfile.1`" ] || exit 1 1012[ -f logfile.2 ] && exit 1 1013exit 0 1014EOF 1015 1016 set_file('runtest', <<"EOF"); 1017# test "logadm2" 1018$envsetup 1019exec $bindir/logadm -f /dev/null -p now logfile -C2 >std.out 2>std.err 1020EOF 1021} 1022 1023########################################################################### 1024# 1025# logadm3 -- minimal basic test of logadm pre/post-commands 1026# 1027########################################################################### 1028sub logadm3 { 1029 set_file('logfile', 'initially logfile'); 1030 set_file('logfile.0', 'initially logfile.0'); 1031 set_file('logfile.1', 'initially logfile.1'); 1032 1033 set_file('checktest', <<'EOF'); 1034[ -s std.err ] && { cat std.err; exit 1; } 1035[ -s std.out ] && exit 1 1036[ -s logfile ] && exit 1 1037[ -f logfile.0 ] || exit 1 1038[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 1039[ -f logfile.1 ] || exit 1 1040[ "xinitially logfile.0" = "x`/bin/cat logfile.1`" ] || exit 1 1041[ -f logfile.2 ] && exit 1 1042[ -f pre.out ] || exit 1 1043[ "xpre-command-stuff" = "x`/bin/cat pre.out`" ] || exit 1 1044[ -f post.out ] || exit 1 1045[ "xpost-command-stuff" = "x`/bin/cat post.out`" ] || exit 1 1046exit 0 1047EOF 1048 1049 set_file('runtest', <<"EOF"); 1050# test "logadm3" 1051$envsetup 1052exec $bindir/logadm -f /dev/null -p now logfile -C2 -b 'echo pre-command-stuff > pre.out' -a 'echo post-command-stuff > post.out' >std.out 2>std.err 1053EOF 1054} 1055 1056########################################################################### 1057# 1058# logadm4 -- test of -t template 1059# 1060########################################################################### 1061sub logadm4 { 1062 set_file('logfile', 'initially logfile'); 1063 1064 set_file('checktest', <<'EOF'); 1065[ -s std.err ] && { cat std.err; exit 1; } 1066[ -s std.out ] && exit 1 1067[ -s logfile ] && exit 1 1068TZ=UTC export TZ 1069d=`/bin/date +%d` 1070[ -f logfile.$d ] || exit 1 1071[ "xinitially logfile" = "x`/bin/cat logfile.$d`" ] || exit 1 1072exit 0 1073EOF 1074 1075 set_file('runtest', <<"EOF"); 1076# test "logadm4" 1077$envsetup 1078exec $bindir/logadm -f /dev/null -p now logfile -t '\$file.\%d' >std.out 2>std.err 1079EOF 1080} 1081 1082########################################################################### 1083# 1084# logadm5 -- test of -R cmd and -E cmd 1085# 1086########################################################################### 1087sub logadm5 { 1088 set_file('logfile', 'initially logfile'); 1089 set_file('logfile.0', 'initially logfile.0'); 1090 1091 set_file('cmd.out.expect', <<'EOF'); 1092just rotated: initially logfile 1093just expired: initially logfile.0 1094EOF 1095 1096 set_file('checktest', <<'EOF'); 1097[ -s std.err ] && { cat std.err; exit 1; } 1098[ -s std.out ] && exit 1 1099[ -s logfile ] && exit 1 1100[ -f logfile.0 ] || exit 1 1101[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 1102[ -f logfile.1 ] || exit 1 1103[ "xinitially logfile.0" = "x`/bin/cat logfile.1`" ] || exit 1 1104exec /bin/diff cmd.out.expect cmd.out 1105EOF 1106 1107 set_file('runtest', <<"EOF"); 1108# test "logadm5" 1109$envsetup 1110exec $bindir/logadm -f /dev/null -p now logfile -C1 -R 'echo just rotated: `/bin/cat \$file` >>cmd.out' -E 'echo just expired: `/bin/cat \$file` >>cmd.out' >std.out 2>std.err 1111EOF 1112} 1113 1114########################################################################### 1115# 1116# logadm6 -- test of -m, -o, -g 1117# 1118########################################################################### 1119sub logadm6 { 1120 set_file('logfile', 'initially logfile'); 1121 1122 set_file('std.err.expect', <<'EOF'); 1123logadm: Warning: command failed: /bin/chown _nonexistentuser_:_nonexistentgroup_ logfile 1124chown: unknown group id _nonexistentgroup_ 1125EOF 1126 1127 set_file('checktest', <<'EOF'); 1128[ -s std.err ] || exit 1; 1129[ -s std.out ] && exit 1 1130[ -s logfile ] && exit 1 1131[ -f logfile.0 ] || exit 1 1132[ "xinitially logfile" = "x`/bin/cat logfile.0`" ] || exit 1 1133[ "`/bin/ls -l logfile | /bin/awk '{ print $1; }'`" = "-r----x--x" ] || exit 1 1134exec /bin/diff std.err.expect std.err 1135EOF 1136 1137 set_file('runtest', <<"EOF"); 1138# test "logadm6" 1139$envsetup 1140exec $bindir/logadm -f /dev/null -p now logfile -m 411 -o _nonexistentuser_ -g _nonexistentgroup_ >std.out 2>std.err 1141EOF 1142} 1143 1144########################################################################### 1145# 1146# logadm7 -- test running through a conffile 1147# 1148########################################################################### 1149sub logadm7 { 1150 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1151 set_file('dir1/syslog', 'initially dir1/syslog'); 1152 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1153 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1154 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1155 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1156 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1157 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1158 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1159 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1160 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1161 set_file('dir2/messages', 'initially dir2/messages'); 1162 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1163 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1164 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1165 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1166 1167 set_file('logadm.conf', <<'EOF'); 1168# 1169# logadm.conf 1170# 1171# this comment # has at least another #-sign in it #... 1172# 1173# Default settings for system log file management. 1174# The -w option to logadm(1M) is the preferred way to write to this file, 1175# but if you do edit it by hand, use "logadm -V" to check it for errors. 1176# but if you do edit it by hand, use "logadm -V" to check it for errors. 1177# 1178# The format of lines in this file is: 1179# <logname> <options> 1180# For each logname listed here, the default options to logadm 1181# are given. Options given on the logadm command line override 1182# the defaults contained in this file. 1183# 1184# logadm typically runs early every morning via an entry in 1185# root's crontab (see crontab(1)). 1186# 1187dir1/syslog -C 8 -a 'echo kill -HUP `cat /var/run/*syslog*pid` >> cmd.out' 1188dir2/messages -C 4 -a 'echo kill -HUP `cat /var/run/*syslog*pid` >> cmd.out' 1189# 1190# The entry below is used by turnacct(1M) 1191# 1192/var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 1193EOF 1194 1195 system("/bin/cp logadm.conf logadm.conf.orig"); 1196 1197 $pid=`cat /var/run/*syslog*pid`; 1198 chomp $pid; 1199 set_file('cmd.out.expect', <<"EOF"); 1200kill -HUP $pid 1201second kill -HUP $pid 1202EOF 1203 1204 set_file('sed.out.expect', <<'EOF'); 1205# This file holds internal data for logadm(1M). 1206# Do not edit. 1207dir1/syslog 1208dir2/messages 1209EOF 1210 1211 set_file('checktest', <<'EOF'); 1212[ -s std.err ] && { cat std.err; exit 1; } 1213[ -s std.out ] && exit 1 1214[ -s logadm.timestamps ] || exit 1 1215[ -s std.err2 ] && exit 1 1216[ -s std.out2 ] && exit 1 1217[ -s std.err3 ] && exit 1 1218[ -s std.out3 ] && exit 1 1219[ -s std.err4 ] && exit 1 1220[ -s std.out4 ] && exit 1 1221[ -f dir1/syslog ] || exit 1 1222[ "xsomething" = "x`/bin/cat dir1/syslog`" ] || exit 1 1223[ -f dir1/syslog.0 ] || exit 1 1224[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1225[ -f dir1/syslog.1 ] || exit 1 1226[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1227[ -f dir1/syslog.2 ] || exit 1 1228[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1229[ -f dir1/syslog.3 ] || exit 1 1230[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 1231[ -f dir1/syslog.4 ] || exit 1 1232[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 1233[ -f dir1/syslog.5 ] || exit 1 1234[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 1235[ -f dir1/syslog.6 ] || exit 1 1236[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 1237[ -f dir1/syslog.7 ] || exit 1 1238[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 1239[ -f dir1/syslog.8 ] && exit 1 1240 1241[ -s dir2/messages ] && exit 1 1242[ -f dir2/messages.0 ] || exit 1 1243[ "xsomething" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1244[ -f dir2/messages.1 ] || exit 1 1245[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1246[ -f dir2/messages.2 ] || exit 1 1247[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1248[ -f dir2/messages.3 ] || exit 1 1249[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.3`" ] || exit 1 1250[ -f dir2/messages.4 ] && exit 1 1251/bin/sed "s/ -P '[^']*' *//" < logadm.timestamps > sed.out 1252/bin/diff sed.out.expect sed.out || exit 1 1253exec /bin/diff logadm.conf.orig logadm.conf 1254EOF 1255 1256 # first logadm call will rotate both syslog and messages 1257 # second one won't because size is zero 1258 # third one won't because of -P timestamps stored in conffile 1259 # fourth one will do messages because of -p now on command line 1260 set_file('runtest', <<"EOF"); 1261# test "logadm7" 1262$envsetup 1263$bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err || exit 1 1264$bindir/logadm -f logadm.conf -F logadm.timestamps dir1/syslog dir2/messages >std.out2 2>std.err2 || exit 1 1265echo something > dir1/syslog 1266echo something > dir2/messages 1267$bindir/logadm -f logadm.conf -F logadm.timestamps >std.out3 2>std.err3 || exit 1 1268exec $bindir/logadm -f logadm.conf -F logadm.timestamps dir2/messages -p now -a 'echo second kill -HUP `cat /var/run/*syslog*pid` >> cmd.out' >std.out4 2>std.err4 1269EOF 1270} 1271 1272########################################################################### 1273# 1274# logadm8 -- test of -z 1275# 1276########################################################################### 1277sub logadm8 { 1278 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1279 set_file('dir1/syslog', 'initially dir1/syslog'); 1280 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1281 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1282 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1283 system("/bin/gzip dir1/syslog.2"); 1284 die "gzip dir1/syslog.2 didn't work\n" unless -f 'dir1/syslog.2.gz'; 1285 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1286 system("/bin/gzip dir1/syslog.3"); 1287 die "gzip dir1/syslog.3 didn't work\n" unless -f 'dir1/syslog.3.gz'; 1288 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1289 system("/bin/gzip dir1/syslog.4"); 1290 die "gzip dir1/syslog.4 didn't work\n" unless -f 'dir1/syslog.4.gz'; 1291 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1292 system("/bin/gzip dir1/syslog.5"); 1293 die "gzip dir1/syslog.5 didn't work\n" unless -f 'dir1/syslog.5.gz'; 1294 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1295 system("/bin/gzip dir1/syslog.6"); 1296 die "gzip dir1/syslog.6 didn't work\n" unless -f 'dir1/syslog.6.gz'; 1297 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1298 system("/bin/gzip dir1/syslog.7"); 1299 die "gzip dir1/syslog.7 didn't work\n" unless -f 'dir1/syslog.7.gz'; 1300 1301 set_file('checktest', <<'EOF'); 1302[ -s std.err ] && { cat std.err; exit 1; } 1303[ -s std.out ] && exit 1 1304[ -f dir1/syslog ] || exit 1 1305[ -s dir1/syslog ] && exit 1 1306[ -f dir1/syslog.0 ] || exit 1 1307[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1308[ -f dir1/syslog.1 ] || exit 1 1309[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1310[ -f dir1/syslog.2.gz ] || exit 1 1311[ "xinitially dir1/syslog.1" = "x`/bin/gzcat dir1/syslog.2.gz`" ] || exit 1 1312[ -f dir1/syslog.3.gz ] || exit 1 1313[ "xinitially dir1/syslog.2" = "x`/bin/gzcat dir1/syslog.3.gz`" ] || exit 1 1314[ -f dir1/syslog.4.gz ] || exit 1 1315[ "xinitially dir1/syslog.3" = "x`/bin/gzcat dir1/syslog.4.gz`" ] || exit 1 1316[ -f dir1/syslog.5.gz ] || exit 1 1317[ "xinitially dir1/syslog.4" = "x`/bin/gzcat dir1/syslog.5.gz`" ] || exit 1 1318[ -f dir1/syslog.6.gz ] || exit 1 1319[ "xinitially dir1/syslog.5" = "x`/bin/gzcat dir1/syslog.6.gz`" ] || exit 1 1320[ -f dir1/syslog.7.gz ] || exit 1 1321[ "xinitially dir1/syslog.6" = "x`/bin/gzcat dir1/syslog.7.gz`" ] || exit 1 1322[ -f dir1/syslog.8 ] && exit 1 1323[ -f dir1/syslog.8.gz ] && exit 1 1324exit 0 1325EOF 1326 1327 set_file('runtest', <<"EOF"); 1328# test "logadm8" 1329$envsetup 1330exec $bindir/logadm -f /dev/null dir1/syslog -z 2 -C 8 >std.out 2>std.err 1331EOF 1332} 1333 1334########################################################################### 1335# 1336# logadm9 -- test of age check 1337# 1338########################################################################### 1339sub logadm9 { 1340 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1341 set_file('dir1/syslog', 'initially dir1/syslog'); 1342 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1343 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1344 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1345 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1346 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1347 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1348 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1349 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1350 set_file('dir1/notes', 'initially dir1/notes'); 1351 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1352 set_file('dir2/messages', 'initially dir2/messages'); 1353 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1354 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1355 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1356 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1357 set_file('dir2/log', 'initially dir2/log'); 1358 1359 $now = time; 1360 $nowstr = gmtime($now); 1361 # a week minus 30 seconds ago... 1362 # technically not a full week, but the heuristic used by logadm 1363 # should think this is "close enough" to a full week 1364 $closetoweeksecs = $now - (60 * 60 * 24 * 7 - 30); 1365 $closetoweek = gmtime($closetoweeksecs); 1366 # a week minus six hours ago... 1367 $lessthanweeksecs = $now - (60 * 60 * 24 * 7 - 60 * 60 * 6); 1368 $lessthanweek = gmtime($lessthanweeksecs); 1369 1370 set_file('logadm.conf', <<"EOF"); 1371# now: $nowstr is $now 1372# $closetoweek is $closetoweeksecs 1373dir1/syslog -C 8 -P '$closetoweek' 1374dir2/log -C 4 1375# $lessthanweek is $lessthanweeksecs 1376dir1/notes -C 2 -P '$lessthanweek' 1377dir2/messages -C 4 1378EOF 1379 set_file('logadm.timestamps', <<"EOF"); 1380dir2/log -P '$closetoweek' 1381dir2/messages -P '$lessthanweek' 1382EOF 1383 1384 set_file('sed.out.expect', <<"EOF"); 1385# This file holds internal data for logadm(1M). 1386# Do not edit. 1387dir1/syslog 1388dir2/log 1389dir1/notes 1390dir2/messages 1391EOF 1392 1393 set_file('checktest', <<'EOF'); 1394[ -s std.err ] && { cat std.err; exit 1; } 1395[ -s std.out ] && exit 1 1396[ -f dir1/syslog ] || exit 1 1397[ -s dir1/syslog ] && exit 1 1398[ -f dir1/syslog.0 ] || exit 1 1399[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1400[ -f dir1/syslog.1 ] || exit 1 1401[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1402[ -f dir1/syslog.2 ] || exit 1 1403[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1404[ -f dir1/syslog.3 ] || exit 1 1405[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 1406[ -f dir1/syslog.4 ] || exit 1 1407[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 1408[ -f dir1/syslog.5 ] || exit 1 1409[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 1410[ -f dir1/syslog.6 ] || exit 1 1411[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 1412[ -f dir1/syslog.7 ] || exit 1 1413[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 1414[ -f dir1/syslog.8 ] && exit 1 1415 1416[ -s dir1/notes ] || exit 1 1417[ "xinitially dir1/notes" = "x`/bin/cat dir1/notes`" ] || exit 1 1418[ -f dir1/notes.0 ] && exit 1 1419 1420[ -f dir2/messages ] || exit 1 1421[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages`" ] || exit 1 1422[ -f dir2/messages.0 ] || exit 1 1423[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1424[ -f dir2/messages.1 ] || exit 1 1425[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1426[ -f dir2/messages.2 ] || exit 1 1427[ "xinitially dir2/messages.2" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1428[ -f dir2/messages.3 ] || exit 1 1429[ "xinitially dir2/messages.3" = "x`/bin/cat dir2/messages.3`" ] || exit 1 1430[ -f dir2/messages.4 ] && exit 1 1431 1432[ -f dir2/log ] || exit 1 1433[ -s dir2/log ] && exit 1 1434[ -f dir2/log.0 ] || exit 1 1435[ "xinitially dir2/log" = "x`/bin/cat dir2/log.0`" ] || exit 1 1436[ -f dir2/log.1 ] && exit 1 1437 1438/bin/sed "s/ -P '[^']*' *//" < logadm.timestamps > sed.out 1439/bin/diff sed.out.expect sed.out || exit 1 1440/bin/sed -n "s/ -P '[^']*' */<&>/p" < logadm.conf > sed.out 1441[ -s sed.out ] && exit 1 1442exit 0 1443EOF 1444 1445 set_file('runtest', <<"EOF"); 1446# test "logadm9" 1447$envsetup 1448exec $bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err 1449EOF 1450} 1451 1452########################################################################### 1453# 1454# logadm9d -- test of age check like logadm9, but age is a couple days 1455# 1456########################################################################### 1457sub logadm9d { 1458 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1459 set_file('dir1/syslog', 'initially dir1/syslog'); 1460 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1461 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1462 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1463 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1464 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1465 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1466 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1467 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1468 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1469 set_file('dir2/messages', 'initially dir2/messages'); 1470 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1471 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1472 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1473 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1474 1475 $now = time; 1476 $nowstr = gmtime($now); 1477 # a day minus 30 seconds ago... 1478 $closetodaysecs = $now - (60 * 60 * 24 - 30); 1479 $closetoday = gmtime($closetodaysecs); 1480 # a day minus six hours ago... 1481 $lessthandaysecs = $now - (60 * 60 * 24 - 60 * 60 * 6); 1482 $lessthanday = gmtime($lessthandaysecs); 1483 1484 set_file('logadm.conf', <<"EOF"); 1485# now: $nowstr is $now 1486# $closetoday is $closetodaysecs 1487dir1/syslog -p 1d -C 8 -P '$closetoday' 1488# $lessthanday is $lessthandaysecs 1489dir2/messages -p 1d -C 4 -P '$lessthanday' 1490EOF 1491 1492 set_file('checktest', <<'EOF'); 1493[ -s std.err ] && { cat std.err; exit 1; } 1494[ -s std.out ] && exit 1 1495[ -f dir1/syslog ] || exit 1 1496[ -s dir1/syslog ] && exit 1 1497[ -f dir1/syslog.0 ] || exit 1 1498[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1499[ -f dir1/syslog.1 ] || exit 1 1500[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1501[ -f dir1/syslog.2 ] || exit 1 1502[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1503[ -f dir1/syslog.3 ] || exit 1 1504[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 1505[ -f dir1/syslog.4 ] || exit 1 1506[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 1507[ -f dir1/syslog.5 ] || exit 1 1508[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 1509[ -f dir1/syslog.6 ] || exit 1 1510[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 1511[ -f dir1/syslog.7 ] || exit 1 1512[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 1513[ -f dir1/syslog.8 ] && exit 1 1514 1515[ -f dir2/messages ] || exit 1 1516[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages`" ] || exit 1 1517[ -f dir2/messages.0 ] || exit 1 1518[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1519[ -f dir2/messages.1 ] || exit 1 1520[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1521[ -f dir2/messages.2 ] || exit 1 1522[ "xinitially dir2/messages.2" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1523[ -f dir2/messages.3 ] || exit 1 1524[ "xinitially dir2/messages.3" = "x`/bin/cat dir2/messages.3`" ] || exit 1 1525[ -f dir2/messages.4 ] && exit 1 1526exit 0 1527EOF 1528 1529 set_file('runtest', <<"EOF"); 1530# test "logadm9d" 1531$envsetup 1532exec $bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err 1533EOF 1534} 1535 1536########################################################################### 1537# 1538# logadm10 -- test of size-based rotation check 1539# 1540########################################################################### 1541sub logadm10 { 1542 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1543 set_file('dir1/syslog', 'initially dir1/syslogXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX'); 1544 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1545 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1546 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1547 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1548 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1549 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1550 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1551 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1552 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1553 set_file('dir2/messages', 'initially dir2/messages'); 1554 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1555 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1556 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1557 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1558 1559 set_file('logadm.conf', <<"EOF"); 1560dir1/syslog -C 8 -s 30b 1561dir2/messages -C 4 -s 30b 1562EOF 1563 1564 set_file('checktest', <<'EOF'); 1565[ -s std.err ] && { cat std.err; exit 1; } 1566[ -s std.out ] && exit 1 1567[ -f dir1/syslog ] || exit 1 1568[ -s dir1/syslog ] && exit 1 1569[ -f dir1/syslog.0 ] || exit 1 1570[ "xinitially dir1/syslogXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1571[ -f dir1/syslog.1 ] || exit 1 1572[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1573[ -f dir1/syslog.2 ] || exit 1 1574[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1575[ -f dir1/syslog.3 ] || exit 1 1576[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 1577[ -f dir1/syslog.4 ] || exit 1 1578[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 1579[ -f dir1/syslog.5 ] || exit 1 1580[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 1581[ -f dir1/syslog.6 ] || exit 1 1582[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 1583[ -f dir1/syslog.7 ] || exit 1 1584[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 1585[ -f dir1/syslog.8 ] && exit 1 1586 1587[ -f dir2/messages ] || exit 1 1588[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages`" ] || exit 1 1589[ -f dir2/messages.0 ] || exit 1 1590[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1591[ -f dir2/messages.1 ] || exit 1 1592[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1593[ -f dir2/messages.2 ] || exit 1 1594[ "xinitially dir2/messages.2" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1595[ -f dir2/messages.3 ] || exit 1 1596[ "xinitially dir2/messages.3" = "x`/bin/cat dir2/messages.3`" ] || exit 1 1597[ -f dir2/messages.4 ] && exit 1 1598exit 0 1599EOF 1600 1601 set_file('runtest', <<"EOF"); 1602# test "logadm10" 1603$envsetup 1604exec $bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err 1605EOF 1606} 1607 1608########################################################################### 1609# 1610# logadm11 -- test of size-based expiration check 1611# 1612########################################################################### 1613sub logadm11 { 1614 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1615 set_file('dir1/syslog', 'initially dir1/syslog'); 1616 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1617 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1618 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1619 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1620 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1621 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1622 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1623 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1624 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1625 set_file('dir2/messages', 'initially dir2/messages'); 1626 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1627 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1628 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1629 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1630 1631 set_file('logadm.conf', <<"EOF"); 1632dir1/syslog -C 8 -s 30b -S 75b 1633dir2/messages -C 4 -s 30b -S 75b 1634EOF 1635 1636 set_file('checktest', <<'EOF'); 1637[ -s std.err ] && { cat std.err; exit 1; } 1638[ -s std.out ] && exit 1 1639[ -f dir1/syslog ] || exit 1 1640[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog`" ] || exit 1 1641[ -f dir1/syslog.0 ] || exit 1 1642[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1643[ -f dir1/syslog.1 ] || exit 1 1644[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1645[ -f dir1/syslog.2 ] || exit 1 1646[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1647[ -f dir1/syslog.3 ] && exit 1 1648[ -f dir1/syslog.4 ] && exit 1 1649[ -f dir1/syslog.5 ] && exit 1 1650[ -f dir1/syslog.6 ] && exit 1 1651[ -f dir1/syslog.7 ] && exit 1 1652[ -f dir1/syslog.8 ] && exit 1 1653 1654[ -f dir2/messages ] || exit 1 1655[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages`" ] || exit 1 1656[ -f dir2/messages.0 ] || exit 1 1657[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1658[ -f dir2/messages.1 ] || exit 1 1659[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1660[ -f dir2/messages.2 ] || exit 1 1661[ "xinitially dir2/messages.2" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1662[ -f dir2/messages.3 ] && exit 1 1663[ -f dir2/messages.4 ] && exit 1 1664exit 0 1665EOF 1666 1667 set_file('runtest', <<"EOF"); 1668# test "logadm11" 1669$envsetup 1670exec $bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err 1671EOF 1672} 1673 1674########################################################################### 1675# 1676# logadm12 -- ENOENT error path 1677# 1678########################################################################### 1679sub logadm12 { 1680 set_file('std.err.expect', <<'EOF'); 1681logadm: Warning: logfile: No such file or directory 1682EOF 1683 1684 set_file('checktest', <<"EOF"); 1685[ -s std.out ] && exit 1 1686exec /bin/diff std.err.expect std.err 1687EOF 1688 1689 set_file('runtest', <<"EOF"); 1690# test "logadm12" 1691$envsetup 1692exec $bindir/logadm -f /dev/null logfile >std.out 2>std.err 1693EOF 1694} 1695 1696########################################################################### 1697# 1698# logadm13 -- ENOENT error path with -N flag 1699# 1700########################################################################### 1701sub logadm13 { 1702 set_file('checktest', <<"EOF"); 1703[ -s std.err ] && { cat std.err; exit 1; } 1704[ -s std.out ] && exit 1 1705exit 0 1706EOF 1707 1708 set_file('runtest', <<"EOF"); 1709# test "logadm13" 1710$envsetup 1711exec $bindir/logadm -N -f /dev/null logfile >std.out 2>std.err 1712EOF 1713} 1714 1715########################################################################### 1716# 1717# logadm14 -- test of -n and -v flags 1718# 1719########################################################################### 1720sub logadm14 { 1721 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 1722 set_file('dir1/syslog', 'initially dir1/syslog'); 1723 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 1724 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 1725 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 1726 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 1727 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 1728 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 1729 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 1730 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 1731 mkdir 'dir2', 0777 or die "mkdir dir2: $!\n"; 1732 set_file('dir2/messages', 'initially dir2/messages'); 1733 set_file('dir2/messages.0', 'initially dir2/messages.0'); 1734 set_file('dir2/messages.1', 'initially dir2/messages.1'); 1735 set_file('dir2/messages.2', 'initially dir2/messages.2'); 1736 set_file('dir2/messages.3', 'initially dir2/messages.3'); 1737 1738 set_file('logadm.conf', <<'EOF'); 1739# 1740# logadm.conf 1741# 1742# Default settings for system log file management. 1743# The -w option to logadm(1M) is the preferred way to write to this file, 1744# but if you do edit it by hand, use "logadm -V" to check it for errors. 1745# but if you do edit it by hand, use "logadm -V" to check it for errors. 1746# 1747# The format of lines in this file is: 1748# <logname> <options> 1749# For each logname listed here, the default options to logadm 1750# are given. Options given on the logadm command line override 1751# the defaults contained in this file. 1752# 1753# logadm typically runs early every morning via an entry in 1754# root's crontab (see crontab(1)). 1755# 1756dir1/syslog -C 8 -a 'echo kill -HUP `cat /var/run/*syslog*pid` >> cmd.out' 1757dir2/messages -C 4 -a 'echo kill -HUP `cat /var/run/*syslog*pid` >> cmd.out' 1758# 1759# The entry below is used by turnacct(1M) 1760# 1761/var/adm/pacct -C 0 -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never 1762EOF 1763 1764 $gid = $); 1765 $gid =~ s/ .*//; 1766 set_file('grep.out.expect', <<'EOF'.<<"EOF".<<'EOF'.<<"EOF".<<'EOF'); 1767# loading logadm.conf 1768# processing logname: dir1/syslog 1769# using default rotate rules: -s1b -p1w 1770# using default template: $file.$n 1771mkdir -p dir1 # verify directory exists 1772mv -f dir1/syslog.7 dir1/syslog.8 # rotate log file 1773mkdir -p dir1 # verify directory exists 1774mv -f dir1/syslog.6 dir1/syslog.7 # rotate log file 1775mkdir -p dir1 # verify directory exists 1776mv -f dir1/syslog.5 dir1/syslog.6 # rotate log file 1777mkdir -p dir1 # verify directory exists 1778mv -f dir1/syslog.4 dir1/syslog.5 # rotate log file 1779mkdir -p dir1 # verify directory exists 1780mv -f dir1/syslog.3 dir1/syslog.4 # rotate log file 1781mkdir -p dir1 # verify directory exists 1782mv -f dir1/syslog.2 dir1/syslog.3 # rotate log file 1783mkdir -p dir1 # verify directory exists 1784mv -f dir1/syslog.1 dir1/syslog.2 # rotate log file 1785mkdir -p dir1 # verify directory exists 1786mv -f dir1/syslog.0 dir1/syslog.1 # rotate log file 1787mkdir -p dir1 # verify directory exists 1788mv -f dir1/syslog dir1/syslog.0 # rotate log file 1789touch dir1/syslog 1790EOF 1791chown $>:$gid dir1/syslog 1792EOF 1793chmod 664 dir1/syslog 1794# processing logname: dir2/messages 1795# using default rotate rules: -s1b -p1w 1796# using default template: $file.$n 1797mkdir -p dir2 # verify directory exists 1798mv -f dir2/messages.3 dir2/messages.4 # rotate log file 1799mkdir -p dir2 # verify directory exists 1800mv -f dir2/messages.2 dir2/messages.3 # rotate log file 1801mkdir -p dir2 # verify directory exists 1802mv -f dir2/messages.1 dir2/messages.2 # rotate log file 1803mkdir -p dir2 # verify directory exists 1804mv -f dir2/messages.0 dir2/messages.1 # rotate log file 1805mkdir -p dir2 # verify directory exists 1806mv -f dir2/messages dir2/messages.0 # rotate log file 1807touch dir2/messages 1808EOF 1809chown $>:$gid dir2/messages 1810EOF 1811chmod 664 dir2/messages 1812# processing logname: /var/adm/pacct 1813# using default template: $file.$n 1814sh -c echo kill -HUP `cat /var/run/*syslog*pid` >> cmd.out # -a cmd 1815# logadm.conf and logadm.timestamps unchanged 1816EOF 1817 1818 set_file('checktest', <<'EOF'); 1819[ -s std.err ] && { cat std.err; exit 1; } 1820[ -f std.out ] || exit 1 1821[ -f dir1/syslog ] || exit 1 1822[ "xinitially dir1/syslog" = "x`/bin/cat dir1/syslog`" ] || exit 1 1823[ -f dir1/syslog.0 ] || exit 1 1824[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 1825[ -f dir1/syslog.1 ] || exit 1 1826[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 1827[ -f dir1/syslog.2 ] || exit 1 1828[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 1829[ -f dir1/syslog.3 ] || exit 1 1830[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 1831[ -f dir1/syslog.4 ] || exit 1 1832[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 1833[ -f dir1/syslog.5 ] || exit 1 1834[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 1835[ -f dir1/syslog.6 ] || exit 1 1836[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 1837[ -f dir1/syslog.7 ] || exit 1 1838[ "xinitially dir1/syslog.7" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 1839[ -f dir1/syslog.8 ] && exit 1 1840 1841[ -f dir2/messages ] || exit 1 1842[ "xinitially dir2/messages" = "x`/bin/cat dir2/messages`" ] || exit 1 1843[ -f dir2/messages.0 ] || exit 1 1844[ "xinitially dir2/messages.0" = "x`/bin/cat dir2/messages.0`" ] || exit 1 1845[ -f dir2/messages.1 ] || exit 1 1846[ "xinitially dir2/messages.1" = "x`/bin/cat dir2/messages.1`" ] || exit 1 1847[ -f dir2/messages.2 ] || exit 1 1848[ "xinitially dir2/messages.2" = "x`/bin/cat dir2/messages.2`" ] || exit 1 1849[ -f dir2/messages.3 ] || exit 1 1850[ "xinitially dir2/messages.3" = "x`/bin/cat dir2/messages.3`" ] || exit 1 1851[ -f dir2/messages.4 ] && exit 1 1852/bin/grep -v 'recording rotation date' std.out > grep.out 1853exec /bin/diff grep.out.expect grep.out 1854EOF 1855 1856 set_file('runtest', <<"EOF"); 1857# test "logadm14" 1858$envsetup 1859exec $bindir/logadm -nv -f logadm.conf -F logadm.timestamps >std.out 2>std.err 1860EOF 1861} 1862 1863########################################################################### 1864# 1865# logadm15 -- test of -T 1866# 1867########################################################################### 1868sub logadm15 { 1869 set_file('logfile', ''); 1870 set_file('logfile.0', 'initially logfile.0'); 1871 set_file('logfile.1', 'initially logfile.1'); 1872 set_file('logfile.2', 'initially logfile.2'); 1873 set_file('logfile.3', 'initially logfile.3'); 1874 set_file('logfile.4', 'initially logfile.4'); 1875 set_file('logfile.5', 'initially logfile.5'); 1876 set_file('logfile.6', 'initially logfile.6'); 1877 set_file('logfile.7', 'initially logfile.7'); 1878 set_file('logfile.8', 'initially logfile.8'); 1879 set_file('logfile.9', 'initially logfile.9'); 1880 1881 set_file('checktest', <<'EOF'); 1882[ -s std.err ] && { cat std.err; exit 1; } 1883[ -s std.out ] && exit 1 1884[ -f logfile ] || exit 1 1885[ "x" = "x`/bin/cat logfile`" ] || exit 1 1886[ -f logfile.0 ] || exit 1 1887[ "xinitially logfile.0" = "x`/bin/cat logfile.0`" ] || exit 1 1888[ -f logfile.1 ] || exit 1 1889[ "xinitially logfile.1" = "x`/bin/cat logfile.1`" ] || exit 1 1890[ -f logfile.2 ] || exit 1 1891[ "xinitially logfile.2" = "x`/bin/cat logfile.2`" ] || exit 1 1892[ -f logfile.3 ] && exit 1 1893[ -f logfile.4 ] || exit 1 1894[ "xinitially logfile.4" = "x`/bin/cat logfile.4`" ] || exit 1 1895[ -f logfile.5 ] && exit 1 1896[ -f logfile.6 ] || exit 1 1897[ "xinitially logfile.6" = "x`/bin/cat logfile.6`" ] || exit 1 1898[ -f logfile.7 ] && exit 1 1899[ -f logfile.8 ] || exit 1 1900[ "xinitially logfile.8" = "x`/bin/cat logfile.8`" ] || exit 1 1901[ -f logfile.9 ] && exit 1 1902[ -f logfile.10 ] && exit 1 1903exit 0 1904EOF 1905 1906 set_file('runtest', <<"EOF"); 1907# test "logadm15" 1908$envsetup 1909exec $bindir/logadm -f /dev/null logfile -C1 -T '*.[13579]'>std.out 2>std.err 1910EOF 1911} 1912 1913########################################################################### 1914# 1915# logadm16 -- test of -h 1916# 1917########################################################################### 1918sub logadm16 { 1919 set_file('std.err.expect', <<'EOF'); 1920Usage: logadm [options] 1921 (processes all entries in /etc/logadm.conf or conffile given by -f) 1922 or: logadm [options] logname... 1923 (processes the given lognames) 1924 1925General options: 1926 -e mailaddr mail errors to given address 1927 -F timestamps use timestamps instead of /var/logadm/timestamps 1928 -f conffile use conffile instead of /etc/logadm.conf 1929 -h display help 1930 -N not an error if log file nonexistent 1931 -n show actions, don't perform them 1932 -r remove logname entry from conffile 1933 -V ensure conffile entries exist, correct 1934 -v print info about actions happening 1935 -w entryname write entry to config file 1936 1937Options which control when a logfile is rotated: 1938(default is: -s1b -p1w if no -s or -p) 1939 -p period only rotate if period passed since last rotate 1940 -P timestamp used to store rotation date in conffile 1941 -s size only rotate if given size or greater 1942 1943Options which control how a logfile is rotated: 1944(default is: -t '$file.$n', owner/group/mode taken from log file) 1945 -a cmd execute cmd after taking actions 1946 -b cmd execute cmd before taking actions 1947 -c copy & truncate logfile, don't rename 1948 -g group new empty log file group 1949 -l rotate log file with local time rather than UTC 1950 -m mode new empty log file mode 1951 -M cmd execute cmd to rotate the log file 1952 -o owner new empty log file owner 1953 -R cmd run cmd on file after rotate 1954 -t template template for naming old logs 1955 -z count gzip old logs except most recent count 1956 1957Options which control the expiration of old logfiles: 1958(default is: -C10 if no -A, -C, or -S) 1959 -A age expire logs older than age 1960 -C count expire old logs until count remain 1961 -E cmd run cmd on file to expire 1962 -S size expire until space used is below size 1963 -T pattern pattern for finding old logs 1964EOF 1965 1966 set_file('checktest', <<'EOF'); 1967[ -s std.out ] && exit 1 1968exec /bin/diff std.err.expect std.err 1969EOF 1970 1971 set_file('runtest', <<"EOF"); 1972# test "logadm16" 1973$envsetup 1974exec $bindir/logadm -h >std.out 2>std.err 1975EOF 1976} 1977 1978########################################################################### 1979# 1980# logadm17 -- test that mkdir -p happens as necessary 1981# 1982########################################################################### 1983sub logadm17 { 1984 set_file('logfile', 'initially logfile'); 1985 1986 set_file('checktest', <<'EOF'); 1987[ -s std.err ] && { cat std.err; exit 1; } 1988[ -s std.out ] && exit 1 1989[ -f dir1/dir2/logfile ] || exit 1 1990[ -f logfile ] || exit 1 1991[ "xinitially logfile" = "x`/bin/cat dir1/dir2/logfile`" ] || exit 1 1992exit 0 1993EOF 1994 1995 set_file('runtest', <<"EOF"); 1996# test "logadm17" 1997$envsetup 1998exec $bindir/logadm -f /dev/null -t 'dir1/dir2/\$basename' logfile -p now >std.out 2>std.err 1999EOF 2000} 2001 2002########################################################################### 2003# 2004# logadm18 -- test of -M option 2005# 2006########################################################################### 2007sub logadm18 { 2008 mkdir 'dir1', 0777 or die "mkdir dir1: $!\n"; 2009 set_file('dir1/syslog', 'initially dir1/syslog'); 2010 set_file('dir1/syslog.0', 'initially dir1/syslog.0'); 2011 set_file('dir1/syslog.1', 'initially dir1/syslog.1'); 2012 set_file('dir1/syslog.2', 'initially dir1/syslog.2'); 2013 set_file('dir1/syslog.3', 'initially dir1/syslog.3'); 2014 set_file('dir1/syslog.4', 'initially dir1/syslog.4'); 2015 set_file('dir1/syslog.5', 'initially dir1/syslog.5'); 2016 set_file('dir1/syslog.6', 'initially dir1/syslog.6'); 2017 set_file('dir1/syslog.7', 'initially dir1/syslog.7'); 2018 2019 set_file('logadm.conf', <<"EOF"); 2020dir1/syslog -C 8 -s 1b -M '/bin/tr [a-z] [A-Z] < \$file > \$nfile; /bin/rm -f \$file' 2021EOF 2022 2023 set_file('checktest', <<'EOF'); 2024[ -s std.err ] && { cat std.err; exit 1; } 2025[ -s std.out ] && exit 1 2026[ -f dir1/syslog ] || exit 1 2027[ -s dir1/syslog ] && exit 1 2028[ -f dir1/syslog.0 ] || exit 1 2029[ "xINITIALLY DIR1/SYSLOG" = "x`/bin/cat dir1/syslog.0`" ] || exit 1 2030[ -f dir1/syslog.1 ] || exit 1 2031[ "xinitially dir1/syslog.0" = "x`/bin/cat dir1/syslog.1`" ] || exit 1 2032[ -f dir1/syslog.2 ] || exit 1 2033[ "xinitially dir1/syslog.1" = "x`/bin/cat dir1/syslog.2`" ] || exit 1 2034[ -f dir1/syslog.3 ] || exit 1 2035[ "xinitially dir1/syslog.2" = "x`/bin/cat dir1/syslog.3`" ] || exit 1 2036[ -f dir1/syslog.4 ] || exit 1 2037[ "xinitially dir1/syslog.3" = "x`/bin/cat dir1/syslog.4`" ] || exit 1 2038[ -f dir1/syslog.5 ] || exit 1 2039[ "xinitially dir1/syslog.4" = "x`/bin/cat dir1/syslog.5`" ] || exit 1 2040[ -f dir1/syslog.6 ] || exit 1 2041[ "xinitially dir1/syslog.5" = "x`/bin/cat dir1/syslog.6`" ] || exit 1 2042[ -f dir1/syslog.7 ] || exit 1 2043[ "xinitially dir1/syslog.6" = "x`/bin/cat dir1/syslog.7`" ] || exit 1 2044[ -f dir1/syslog.8 ] && exit 1 2045 2046exit 0 2047EOF 2048 2049 set_file('runtest', <<"EOF"); 2050# test "logadm18" 2051$envsetup 2052exec $bindir/logadm -f logadm.conf -F logadm.timestamps >std.out 2>std.err 2053EOF 2054} 2055 2056############################################################################# 2057# 2058# logadm19 -- test of -l 2059# 2060############################################################################# 2061sub logadm19 { 2062 set_file('logfile', 'initially logfile'); 2063 2064 set_file('checktest', <<'EOF'); 2065[ -s std.err ] && { cat std.err; exit 1; } 2066[ -s std.out ] && exit 1 2067[ -s logfile ] && exit 1 2068TZ= export TZ 2069d=`/bin/date +\%d\%H\%M` 2070[ -f logfile.$d ] || exit 1 2071[ "xinitially logfile" = "x`/bin/cat logfile.$d`" ] || exit 1 2072exit 0 2073EOF 2074 2075 set_file('runtest', <<"EOF"); 2076# test "logadm19" 2077$envsetup 2078exec $bindir/logadm -f /dev/null -l -p now logfile -t '\$file.\%d\%H\%M' >std.out 2>std.err 2079EOF 2080} 2081 2082############################################################################# 2083# 2084# logadm20 -- test of unquotables/error handling 2085# 2086############################################################################# 2087sub logadm20 { 2088 set_file('logadm.conf', <<'EOF'); 2089# non-trivial entry 2090/var/log/syslog -C 8 -a 'kill -HUP `cat /var/run/*syslog*pid`' 2091EOF 2092 2093 set_file('std.err.expect', <<'EOF'); 2094logadm: Error: Can't protect quotes in </bin/echo "She can't take anymore, Cap'n!"> 2095logadm: Error: unsafe to update configuration file or timestamps 2096logadm: Error: bailing out due to command line errors 2097Use "logadm -h" for help. 2098exit=1 2099EOF 2100 2101 set_file('checktest', <<'EOF'); 2102[ -s std.err ] || exit 1 2103[ -s std.out ] && exit 1 2104[ -f logadm.conf????? ] && exit 1 2105[ -f logadm.timestamps????? ] && exit 1 2106exec /bin/diff std.err.expect std.err 2107EOF 2108 2109 set_file('runtest', <<"EOF"); 2110# test "logadm20" 2111$envsetup 2112$bindir/logadm -f logadm.conf -F logadm.timestamps -w /a/b/c -p 1w -l -b "/bin/echo \\"She can't take anymore, Cap'n!\\"" >std.out 2>std.err 2113echo exit=\$? >>std.err 2114EOF 2115} 2116 2117############################################################################# 2118# 2119# logadm21 -- test of busted configuration file 2120# 2121############################################################################# 2122sub logadm21 { 2123 set_file('logadm.conf', <<'EOF'); 2124poop 2125EOF 2126 set_file('checktest', <<'EOF'); 2127[ -s std.err ] || exit 1 2128grep Warning std.err > /dev/null 2129EOF 2130 2131 set_file('runtest', <<"EOF"); 2132# test "logadm21" 2133$envsetup 2134$bindir/logadm -f logadm.conf -F /dev/null 2>std.err 2135exit 0 2136EOF 2137} 2138 2139############################################################################# 2140# 2141# logadm22 - test for keeping timestamps in timestamps file on -w 2142# 2143############################################################################# 2144 2145sub logadm22 { 2146 set_file('logadm.conf', <<'EOF'); 2147wildcard_test -A 3d dir1/*.log 2148regular_test -A 3d dir2/test.log 2149EOF 2150 2151set_file('logadm.conf.expect', <<'EOF'); 2152wildcard_test -A 3d dir1/*.log 2153regular_test -A 3d dir2/test.log 2154dir3/test.log -A 3d 2155EOF 2156 2157 set_file('logadm.timestamps', <<'EOF'); 2158# This file holds internal data for logadm(1M). 2159# Do not edit. 2160dir1/foo.log -P 'Thu Nov 1 16:56:42 2001' 2161dir2/test.log -P 'Thu Nov 1 16:56:42 2001' 2162EOF 2163 system("/bin/cp logadm.timestamps logadm.timestamps.expect"); 2164 2165 set_file('checktest', <<'EOF'); 2166[ -s std.err ] && { cat std.err; exit 1; } 2167/bin/diff logadm.conf.expect logadm.conf || exit 1 2168/bin/diff logadm.timestamps.expect logadm.timestamps || exit 1 2169EOF 2170 2171 set_file('runtest', <<"EOF"); 2172# test "logadm22" 2173$envsetup 2174$bindir/logadm -f logadm.conf -F logadm.timestamps -w dir3/test.log -A 3d 2>std.err 2175exit 0 2176EOF 2177 2178} 2179 2180############################################################################# 2181# 2182# logadm23 - test for keeping timestamps in timestamps file on -r 2183# 2184############################################################################# 2185 2186sub logadm23 { 2187 set_file('logadm.conf', <<'EOF'); 2188wildcard_test -A 3d dir1/*.log 2189regular_test -A 3d dir2/test.log 2190EOF 2191 2192set_file('logadm.conf.expect', <<'EOF'); 2193wildcard_test -A 3d dir1/*.log 2194EOF 2195 2196 set_file('logadm.timestamps', <<'EOF'); 2197# This file holds internal data for logadm(1M). 2198# Do not edit. 2199dir1/foo.log -P 'Thu Nov 1 16:56:42 2001' 2200dir2/test.log -P 'Thu Nov 1 16:56:42 2001' 2201EOF 2202 system("/bin/cp logadm.timestamps logadm.timestamps.expect"); 2203 2204 set_file('checktest', <<'EOF'); 2205[ -s std.err ] && { cat std.err; exit 1; } 2206/bin/diff logadm.conf.expect logadm.conf || exit 1 2207/bin/diff logadm.timestamps.expect logadm.timestamps || exit 1 2208EOF 2209 2210 set_file('runtest', <<"EOF"); 2211# test "logadm23" 2212$envsetup 2213$bindir/logadm -f logadm.conf -F logadm.timestamps -r regular_test 2>std.err 2214exit 0 2215EOF 2216 2217} 2218 2219########################################################################### 2220# 2221# stderr1 -- ensure verbose stderr does not deadlock 2222# 2223########################################################################### 2224sub stderr1 { 2225 set_file('logfile', 'initially logfile'); 2226 2227 set_file('std.err.uniq.expect', <<'EOF'); 2228 1 logadm: Warning: command failed: /bin/sh -c exec 1>&2; for i in {1..250000}; do echo pre-command-stuff; done 2229250000 pre-command-stuff 2230 1 logadm: Warning: command failed: /bin/sh -c exec 1>&2; for i in {1..250000}; do echo post-command-stuff; done 2231250000 post-command-stuff 2232EOF 2233 2234 set_file('checktest', <<'EOF'); 2235[ -s std.out ] && exit 1 2236/bin/diff -u std.err.uniq.expect std.err.uniq || exit 1 2237exit 0 2238EOF 2239 2240 # The output redirection below looks wrong, but it is not. The redirect 2241 # of stderr before the redirect of stdout causes stderr to be piped to 2242 # uniq. 2243 set_file('runtest', <<"EOF"); 2244# test "stderr1" 2245$envsetup 2246exec $bindir/logadm -f /dev/null -p now logfile \\ 2247 -b 'exec 1>&2; for i in {1..250000}; do echo pre-command-stuff; done' \\ 2248 -a 'exec 1>&2; for i in {1..250000}; do echo post-command-stuff; done' \\ 2249 2>&1 >std.out | uniq -c >std.err.uniq 2250EOF 2251} 2252