xref: /illumos-gate/usr/src/cmd/fs.d/nfs/svc/nfs-server (revision 2983dda76a6d296fdb560c88114fe41caad1b84f)
1#!/sbin/sh
2#
3# CDDL HEADER START
4#
5# The contents of this file are subject to the terms of the
6# Common Development and Distribution License (the "License").
7# You may not use this file except in compliance with the License.
8#
9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10# or http://www.opensolaris.org/os/licensing.
11# See the License for the specific language governing permissions
12# and limitations under the License.
13#
14# When distributing Covered Code, include this CDDL HEADER in each
15# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16# If applicable, add the following below this CDDL HEADER, with the
17# fields enclosed by brackets "[]" replaced with your own identifying
18# information: Portions Copyright [yyyy] [name of copyright owner]
19#
20# CDDL HEADER END
21#
22#
23# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26
27# Start/stop processes required for server NFS
28
29. /lib/svc/share/smf_include.sh
30. /lib/svc/share/ipf_include.sh
31zone=`smf_zonename`
32
33#
34# Handling a corner case here. If we were in offline state due to an
35# unsatisfied dependency, the ipf_method process wouldn't have generated
36# the ipfilter configuration. When we transition to online because the
37# dependency is satisfied, the start method will have to generate the
38# ipfilter configuration. To avoid all possible deadlock scenarios,
39# we restart ipfilter which will regenerate the ipfilter configuration
40# for the entire system.
41#
42# The ipf_method process signals that it didn't generate ipf rules by
43# removing the service's ipf file. Thus we only restart network/ipfilter
44# when the file is missing.
45#
46configure_ipfilter()
47{
48	ipfile=`fmri_to_file $SMF_FMRI $IPF_SUFFIX`
49	[ -f "$ipfile" ] && return 0
50
51        #
52	# Nothing to do if:
53        # - ipfilter isn't online
54	# - global policy is 'custom'
55	# - service's policy is 'use_global'
56        #
57        service_check_state $IPF_FMRI $SMF_ONLINE || return 0
58        [ "`get_global_def_policy`" = "custom" ] && return 0
59	[ "`get_policy $SMF_FMRI`" = "use_global" ] && return 0
60
61	svcadm restart $IPF_FMRI
62}
63
64case "$1" in
65'start')
66	# The NFS server is not supported in a local zone
67	if smf_is_nonglobalzone; then
68		/usr/sbin/svcadm disable -t svc:/network/nfs/server
69		echo "The NFS server is not supported in a local zone"
70		sleep 5 &
71		exit $SMF_EXIT_OK
72	fi
73
74	# Share all file systems enabled for sharing. sharemgr understands
75	# regular shares and ZFS shares and will handle both. Technically,
76	# the shares would have been started long before getting here since
77	# nfsd has a dependency on them.
78
79	startnfsd=0
80
81	# restart stopped shares from the repository
82	/usr/sbin/sharemgr start -P nfs -a
83
84	# Start up mountd and nfsd if anything is exported.
85
86	if /usr/bin/grep -s nfs /etc/dfs/sharetab >/dev/null; then
87		startnfsd=1
88	fi
89
90	# If auto-enable behavior is disabled, always start nfsd
91
92	if [ `svcprop -p application/auto_enable nfs/server` = "false" ]; then
93		startnfsd=1
94	fi
95
96	# Options for nfsd are now set in /etc/default/nfs
97	if [ $startnfsd -ne 0 ]; then
98		/usr/lib/nfs/mountd
99		rc=$?
100		if [ $rc != 0 ]; then
101			/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
102			echo "$0: mountd failed with $rc"
103			sleep 5 &
104			exit $SMF_EXIT_ERR_FATAL
105		fi
106
107		/usr/lib/nfs/nfsd
108		rc=$?
109		if [ $rc != 0 ]; then
110			/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
111			echo "$0: nfsd failed with $rc"
112			sleep 5 &
113			exit $SMF_EXIT_ERR_FATAL
114		fi
115
116		configure_ipfilter
117	else
118		/usr/sbin/svcadm disable -t svc:/network/nfs/server
119		echo "No NFS filesystems are shared"
120		sleep 5 &
121	fi
122
123	;;
124
125'refresh')
126	/usr/sbin/sharemgr start -P nfs -a
127	;;
128
129'stop')
130	/usr/bin/pkill -x -u 0,1 -z $zone '(nfsd|mountd)'
131
132	# Unshare all shared file systems using NFS
133
134	/usr/sbin/sharemgr stop -P nfs -a
135
136	#
137	# Wait up to 10 seconds for nfslogd to gracefully handle SIGHUP
138	#
139	/usr/bin/pkill -HUP -x -u 0 -z $zone nfslogd
140	wtime=10
141
142	while [ $wtime -gt 0 ]; do
143		/usr/bin/pgrep -x -u 0 -z $zone nfslogd >/dev/null || break
144		wtime=`expr $wtime - 1`
145		sleep 1
146	done
147
148	#
149	# Kill nfslogd more forcefully if it did not shutdown during
150	# the grace period
151	#
152	if [ $wtime -eq 0 ]; then
153		/usr/bin/pkill -TERM -x -u 0 -z $zone nfslogd
154	fi
155
156	# Kill any processes left in service contract
157	smf_kill_contract $2 TERM 1
158	[ $? -ne 0 ] && exit 1
159	;;
160
161'ipfilter')
162	#
163	# NFS related services are RPC. nfs/server has nfsd which has
164	# well-defined port number but mountd is an RPC daemon.
165	#
166	# Essentially, we generate rules for the following "services"
167	#  - nfs/server which has nfsd and mountd
168	#  - nfs/rquota
169	#
170	# The following services are enabled for both nfs client and
171	# server so we'll treat them as client services and simply
172	# allow incoming traffic.
173	#  - nfs/status
174	#  - nfs/nlockmgr
175	#  - nfs/cbd
176	#
177	NFS_FMRI="svc:/network/nfs/server:default"
178	RQUOTA_FMRI="svc:/network/nfs/rquota:default"
179	FMRI=$2
180
181	file=`fmri_to_file $FMRI $IPF_SUFFIX`
182	echo "# $FMRI" >$file
183	policy=`get_policy $NFS_FMRI`
184	ip="any"
185
186	#
187	# nfs/server configuration is processed in the start method.
188	#
189	if [ "$FMRI" = "$NFS_FMRI" ]; then
190		service_check_state $FMRI $SMF_ONLINE
191		if [ $? -ne 0 ]; then
192			rm  $file
193			exit $SMF_EXIT_OK
194		fi
195
196		nfs_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI 2>/dev/null`
197		tport=`$SERVINFO -p -t -s $nfs_name 2>/dev/null`
198		if [ -n "$tport" ]; then
199			generate_rules $FMRI $policy "tcp" $ip $tport $file
200		fi
201
202		uport=`$SERVINFO -p -u -s $nfs_name 2>/dev/null`
203		if [ -n "$uport" ]; then
204			generate_rules $FMRI $policy "udp" $ip $uport $file
205		fi
206
207		tports=`$SERVINFO -R -p -t -s "mountd" 2>/dev/null`
208		if [ -n "$tports" ]; then
209			for tport in $tports; do
210				generate_rules $FMRI $policy "tcp" $ip \
211				    $tport $file
212			done
213		fi
214
215		uports=`$SERVINFO -R -p -u -s "mountd" 2>/dev/null`
216		if [ -n "$uports" ]; then
217			for uport in $uports; do
218				generate_rules $FMRI $policy "udp" $ip \
219				    $uport $file
220			done
221		fi
222
223	elif [ "$FMRI" = "$RQUOTA_FMRI" ]; then
224		iana_name=`svcprop -p inetd/name $FMRI`
225
226		tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
227		if [ -n "$tports" ]; then
228			for tport in $tports; do
229				generate_rules $NFS_FMRI $policy "tcp" \
230				    $ip $tport $file
231			done
232		fi
233
234		uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
235		if [ -n "$uports" ]; then
236			for uport in $uports; do
237				generate_rules $NFS_FMRI $policy "udp" \
238				    $ip $uport $file
239			done
240		fi
241	else
242		#
243		# Handle the client services here
244		#
245		restarter=`svcprop -p general/restarter $FMRI 2>/dev/null`
246		if [ "$restarter" = "$INETDFMRI" ]; then
247			iana_name=`svcprop -p inetd/name $FMRI`
248			isrpc=`svcprop -p inetd/isrpc $FMRI`
249		else
250			iana_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI`
251			isrpc=`svcprop -p $FW_CONTEXT_PG/isrpc $FMRI`
252		fi
253
254		if [ "$isrpc" = "true" ]; then
255			tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
256			uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
257		else
258			tports=`$SERVINFO -p -t -s $iana_name 2>/dev/null`
259			uports=`$SERVINFO -p -u -s $iana_name 2>/dev/null`
260		fi
261
262		if [ -n "$tports" ]; then
263			for tport in $tports; do
264				echo "pass in log quick proto tcp from any" \
265				    "to any port = ${tport} flags S " \
266				    "keep state" >>${file}
267			done
268		fi
269
270		if [ -n "$uports" ]; then
271			for uport in $uports; do
272				echo "pass in log quick proto udp from any" \
273				    "to any port = ${uport}" >>${file}
274			done
275		fi
276	fi
277
278	;;
279
280*)
281	echo "Usage: $0 { start | stop | refresh }"
282	exit 1
283	;;
284esac
285exit $SMF_EXIT_OK
286