xref: /illumos-gate/usr/src/cmd/devfsadm/cfg_link.c (revision bebb829deac32e16136b725d421267d3dceb6cfd)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #include <devfsadm.h>
28 #include <stdio.h>
29 #include <strings.h>
30 #include <stdlib.h>
31 #include <stdarg.h>
32 #include <limits.h>
33 #include <unistd.h>
34 #include <config_admin.h>
35 #include <cfg_link.h>
36 #include <sys/types.h>
37 #include <sys/mkdev.h>
38 #include <sys/hotplug/pci/pcihp.h>
39 
40 #ifdef	DEBUG
41 #define	dprint(args)	devfsadm_errprint args
42 /*
43  * for use in print routine arg list as a shorthand way to locate node via
44  * "prtconf -D" to avoid messy and cluttered debugging code
45  * don't forget the corresponding "%s%d" format
46  */
47 #define	DRVINST(node)	di_driver_name(node), di_instance(node)
48 #else
49 #define	dprint(args)
50 #endif
51 
52 
53 static int	scsi_cfg_creat_cb(di_minor_t minor, di_node_t node);
54 static int	sbd_cfg_creat_cb(di_minor_t minor, di_node_t node);
55 static int	usb_cfg_creat_cb(di_minor_t minor, di_node_t node);
56 static char	*get_roothub(const char *path, void *cb_arg);
57 static int	pci_cfg_creat_cb(di_minor_t minor, di_node_t node);
58 static int	ib_cfg_creat_cb(di_minor_t minor, di_node_t node);
59 static int	sata_cfg_creat_cb(di_minor_t minor, di_node_t node);
60 static int	sdcard_cfg_creat_cb(di_minor_t minor, di_node_t node);
61 
62 static di_node_t	pci_cfg_chassis_node(di_node_t, di_prom_handle_t);
63 static char 	*pci_cfg_slotname(di_node_t, di_prom_handle_t, minor_t);
64 static int	pci_cfg_ap_node(minor_t, di_node_t, di_prom_handle_t,
65 		    char *, int, int);
66 static int	pci_cfg_iob_name(di_minor_t, di_node_t, di_prom_handle_t,
67 		    char *, int);
68 static minor_t	pci_cfg_pcidev(di_node_t, di_prom_handle_t);
69 static int	pci_cfg_ap_path(di_minor_t, di_node_t, di_prom_handle_t,
70 		    char *, int, char **);
71 static char 	*pci_cfg_info_data(char *);
72 static int	pci_cfg_is_ap_path(di_node_t, di_prom_handle_t);
73 static int	pci_cfg_ap_legacy(di_minor_t, di_node_t, di_prom_handle_t,
74 		    char *, int);
75 static void	pci_cfg_rm_invalid_links(char *, char *);
76 static void	pci_cfg_rm_link(char *);
77 static void	pci_cfg_rm_all(char *);
78 static char	*pci_cfg_devpath(di_node_t, di_minor_t);
79 static di_node_t	pci_cfg_snapshot(di_node_t, di_minor_t,
80 			    di_node_t *, di_minor_t *);
81 
82 /* flag definitions for di_propall_*(); value "0" is always the default flag */
83 #define	DIPROP_PRI_NODE		0x0
84 #define	DIPROP_PRI_PROM		0x1
85 static int	di_propall_lookup_ints(di_prom_handle_t, int,
86 		    dev_t, di_node_t, const char *, int **);
87 static int	di_propall_lookup_strings(di_prom_handle_t, int,
88 		    dev_t, di_node_t, const char *, char **);
89 static int 	serid_printable(uint64_t *seridp);
90 static int	di_propall_lookup_slot_names(di_prom_handle_t, int,
91 		    dev_t, di_node_t, di_slot_name_t **);
92 
93 
94 /*
95  * NOTE: The CREATE_DEFER flag is private to this module.
96  *	 NOT to be used by other modules
97  */
98 static devfsadm_create_t cfg_create_cbt[] = {
99 	{ "attachment-point", DDI_NT_SCSI_ATTACHMENT_POINT, NULL,
100 	    TYPE_EXACT | CREATE_DEFER, ILEVEL_0, scsi_cfg_creat_cb
101 	},
102 	{ "attachment-point", DDI_NT_SBD_ATTACHMENT_POINT, NULL,
103 	    TYPE_EXACT, ILEVEL_0, sbd_cfg_creat_cb
104 	},
105 	{ "fc-attachment-point", DDI_NT_FC_ATTACHMENT_POINT, NULL,
106 	    TYPE_EXACT | CREATE_DEFER, ILEVEL_0, scsi_cfg_creat_cb
107 	},
108 	{ "attachment-point", DDI_NT_USB_ATTACHMENT_POINT, NULL,
109 	    TYPE_EXACT, ILEVEL_0, usb_cfg_creat_cb
110 	},
111 	{ "attachment-point", DDI_NT_PCI_ATTACHMENT_POINT, NULL,
112 	    TYPE_EXACT, ILEVEL_0, pci_cfg_creat_cb
113 	},
114 	{ "attachment-point", DDI_NT_IB_ATTACHMENT_POINT, NULL,
115 	    TYPE_EXACT, ILEVEL_0, ib_cfg_creat_cb
116 	},
117 	{ "attachment-point", DDI_NT_SATA_ATTACHMENT_POINT, NULL,
118 	    TYPE_EXACT, ILEVEL_0, sata_cfg_creat_cb
119 	},
120 	{ "attachment-point", DDI_NT_SDCARD_ATTACHMENT_POINT, NULL,
121 	    TYPE_EXACT, ILEVEL_0, sdcard_cfg_creat_cb
122 	}
123 };
124 
125 DEVFSADM_CREATE_INIT_V0(cfg_create_cbt);
126 
127 static devfsadm_remove_t cfg_remove_cbt[] = {
128 	{ "attachment-point", SCSI_CFG_LINK_RE, RM_POST,
129 	    ILEVEL_0, devfsadm_rm_all
130 	},
131 	{ "attachment-point", SBD_CFG_LINK_RE, RM_POST,
132 	    ILEVEL_0, devfsadm_rm_all
133 	},
134 	{ "fc-attachment-point", SCSI_CFG_LINK_RE, RM_POST,
135 	    ILEVEL_0, devfsadm_rm_all
136 	},
137 	{ "attachment-point", USB_CFG_LINK_RE, RM_POST|RM_HOT|RM_ALWAYS,
138 	    ILEVEL_0, devfsadm_rm_all
139 	},
140 	{ "attachment-point", PCI_CFG_LINK_RE, RM_POST,
141 	    ILEVEL_0, devfsadm_rm_all
142 	},
143 	{ "attachment-point", PCI_CFG_PATH_LINK_RE, RM_POST|RM_HOT,
144 	    ILEVEL_0, pci_cfg_rm_all
145 	},
146 	{ "attachment-point", IB_CFG_LINK_RE, RM_POST|RM_HOT|RM_ALWAYS,
147 	    ILEVEL_0, devfsadm_rm_all
148 	},
149 	{ "attachment-point", SATA_CFG_LINK_RE, RM_POST|RM_HOT|RM_ALWAYS,
150 	    ILEVEL_0, devfsadm_rm_all
151 	},
152 	{ "attachment-point", SDCARD_CFG_LINK_RE, RM_POST|RM_HOT|RM_ALWAYS,
153 	    ILEVEL_0, devfsadm_rm_all
154 	},
155 };
156 
157 DEVFSADM_REMOVE_INIT_V0(cfg_remove_cbt);
158 
159 static int
160 scsi_cfg_creat_cb(di_minor_t minor, di_node_t node)
161 {
162 	char path[PATH_MAX + 1];
163 	char *c_num = NULL, *devfs_path, *mn;
164 	devfsadm_enumerate_t rules[3] = {
165 	    {"^r?dsk$/^c([0-9]+)", 1, MATCH_PARENT},
166 	    {"^cfg$/^c([0-9]+)$", 1, MATCH_ADDR},
167 	    {"^scsi$/^.+$/^c([0-9]+)", 1, MATCH_PARENT}
168 	};
169 
170 	mn = di_minor_name(minor);
171 
172 	if ((devfs_path = di_devfs_path(node)) == NULL) {
173 		return (DEVFSADM_CONTINUE);
174 	}
175 	(void) strcpy(path, devfs_path);
176 	(void) strcat(path, ":");
177 	(void) strcat(path, mn);
178 	di_devfs_path_free(devfs_path);
179 
180 	if (devfsadm_enumerate_int(path, 1, &c_num, rules, 3)
181 	    == DEVFSADM_FAILURE) {
182 		/*
183 		 * Unlike the disks module we don't retry on failure.
184 		 * If we have multiple "c" numbers for a single physical
185 		 * controller due to bug 4045879, we will not assign a
186 		 * c-number/symlink for the controller.
187 		 */
188 		return (DEVFSADM_CONTINUE);
189 	}
190 
191 	(void) strcpy(path, CFG_DIRNAME);
192 	(void) strcat(path, "/c");
193 	(void) strcat(path, c_num);
194 
195 	free(c_num);
196 
197 	(void) devfsadm_mklink(path, node, minor, 0);
198 
199 	return (DEVFSADM_CONTINUE);
200 }
201 
202 static int
203 sbd_cfg_creat_cb(di_minor_t minor, di_node_t node)
204 {
205 	char path[PATH_MAX + 1];
206 
207 	(void) strcpy(path, CFG_DIRNAME);
208 	(void) strcat(path, "/");
209 	(void) strcat(path, di_minor_name(minor));
210 	(void) devfsadm_mklink(path, node, minor, 0);
211 	return (DEVFSADM_CONTINUE);
212 }
213 
214 
215 static int
216 usb_cfg_creat_cb(di_minor_t minor, di_node_t node)
217 {
218 	char *cp, path[PATH_MAX + 1];
219 	devfsadm_enumerate_t rules[1] =
220 		{"^cfg$/^usb([0-9]+)$", 1, MATCH_CALLBACK, NULL, get_roothub};
221 
222 	if ((cp = di_devfs_path(node)) == NULL) {
223 		return (DEVFSADM_CONTINUE);
224 	}
225 
226 	(void) snprintf(path, sizeof (path), "%s:%s", cp, di_minor_name(minor));
227 	di_devfs_path_free(cp);
228 
229 	if (devfsadm_enumerate_int(path, 0, &cp, rules, 1)) {
230 		return (DEVFSADM_CONTINUE);
231 	}
232 
233 	/* create usbN and the symlink */
234 	(void) snprintf(path, sizeof (path), "%s/usb%s/%s", CFG_DIRNAME, cp,
235 	    di_minor_name(minor));
236 	free(cp);
237 
238 	(void) devfsadm_mklink(path, node, minor, 0);
239 
240 	return (DEVFSADM_CONTINUE);
241 }
242 
243 
244 static int
245 sata_cfg_creat_cb(di_minor_t minor, di_node_t node)
246 {
247 	char path[PATH_MAX + 1], l_path[PATH_MAX], *buf, *devfspath;
248 	char *minor_nm;
249 	devfsadm_enumerate_t rules[1] =
250 		{"^cfg$/^sata([0-9]+)$", 1, MATCH_ADDR};
251 
252 	minor_nm = di_minor_name(minor);
253 	if (minor_nm == NULL)
254 		return (DEVFSADM_CONTINUE);
255 
256 	devfspath = di_devfs_path(node);
257 	if (devfspath == NULL)
258 		return (DEVFSADM_CONTINUE);
259 
260 	(void) strlcpy(path, devfspath, sizeof (path));
261 	(void) strlcat(path, ":", sizeof (path));
262 	(void) strlcat(path, minor_nm, sizeof (path));
263 	di_devfs_path_free(devfspath);
264 
265 	/* build the physical path from the components */
266 	if (devfsadm_enumerate_int(path, 0, &buf, rules, 1) ==
267 	    DEVFSADM_FAILURE) {
268 		return (DEVFSADM_CONTINUE);
269 	}
270 
271 	(void) snprintf(l_path, sizeof (l_path), "%s/sata%s/%s", CFG_DIRNAME,
272 	    buf, minor_nm);
273 	free(buf);
274 
275 	(void) devfsadm_mklink(l_path, node, minor, 0);
276 
277 	return (DEVFSADM_CONTINUE);
278 }
279 
280 static int
281 sdcard_cfg_creat_cb(di_minor_t minor, di_node_t node)
282 {
283 	char path[PATH_MAX +1], l_path[PATH_MAX], *buf, *devfspath;
284 	char *minor_nm;
285 	devfsadm_enumerate_t rules[1] =
286 	    {"^cfg$/^sdcard([0-9]+)$", 1, MATCH_ADDR};
287 
288 	minor_nm = di_minor_name(minor);
289 	if (minor_nm == NULL)
290 		return (DEVFSADM_CONTINUE);
291 
292 	devfspath = di_devfs_path(node);
293 	if (devfspath == NULL)
294 		return (DEVFSADM_CONTINUE);
295 
296 	(void) snprintf(path, sizeof (path), "%s:%s", devfspath, minor_nm);
297 	di_devfs_path_free(devfspath);
298 
299 	/* build the physical path from the components */
300 	if (devfsadm_enumerate_int(path, 0, &buf, rules, 1) ==
301 	    DEVFSADM_FAILURE) {
302 		return (DEVFSADM_CONTINUE);
303 	}
304 
305 	(void) snprintf(l_path, sizeof (l_path), "%s/sdcard%s/%s",
306 	    CFG_DIRNAME, buf, minor_nm);
307 	free(buf);
308 
309 	(void) devfsadm_mklink(l_path, node, minor, 0);
310 
311 	return (DEVFSADM_CONTINUE);
312 }
313 
314 /*
315  * get_roothub:
316  *	figure out the root hub path to calculate /dev/cfg/usbN
317  */
318 /* ARGSUSED */
319 static char *
320 get_roothub(const char *path, void *cb_arg)
321 {
322 	int  i, count = 0;
323 	char *physpath, *cp;
324 
325 	/* make a copy */
326 	if ((physpath = strdup(path)) == NULL) {
327 		return (NULL);
328 	}
329 
330 	/*
331 	 * physpath must always have a minor name component
332 	 */
333 	if ((cp = strrchr(physpath, ':')) == NULL) {
334 		free(physpath);
335 		return (NULL);
336 	}
337 	*cp++ = '\0';
338 
339 	/*
340 	 * No '.' in the minor name indicates a roothub port.
341 	 */
342 	if (strchr(cp, '.') == NULL) {
343 		/* roothub device */
344 		return (physpath);
345 	}
346 
347 	while (*cp) {
348 		if (*cp == '.')
349 			count++;
350 		cp++;
351 	}
352 
353 	/* Remove as many trailing path components as there are '.'s */
354 	for (i = 0; i < count; i++) {
355 		if ((cp = strrchr(physpath, '/')) == NULL || (cp == physpath)) {
356 			free(physpath);
357 			return (NULL);
358 		}
359 		*cp = '\0';
360 	}
361 
362 	return (physpath);
363 }
364 
365 
366 /*
367  * returns an allocted string containing the device path for <node> and
368  * <minor>
369  */
370 static char *
371 pci_cfg_devpath(di_node_t node, di_minor_t minor)
372 {
373 	char *path;
374 	char *bufp;
375 	char *minor_nm;
376 	int buflen;
377 
378 	path = di_devfs_path(node);
379 	minor_nm = di_minor_name(minor);
380 	buflen = snprintf(NULL, 0, "%s:%s", path, minor_nm) + 1;
381 
382 	bufp = malloc(sizeof (char) * buflen);
383 	if (bufp != NULL)
384 		(void) snprintf(bufp, buflen, "%s:%s", path, minor_nm);
385 
386 	di_devfs_path_free(path);
387 	return (bufp);
388 }
389 
390 
391 static int
392 di_propall_lookup_ints(di_prom_handle_t ph, int flags,
393     dev_t dev, di_node_t node, const char *prop_name, int **prop_data)
394 {
395 	int rv;
396 
397 	if (flags & DIPROP_PRI_PROM) {
398 		rv = di_prom_prop_lookup_ints(ph, node, prop_name, prop_data);
399 		if (rv < 0)
400 			rv = di_prop_lookup_ints(dev, node, prop_name,
401 			    prop_data);
402 	} else {
403 		rv = di_prop_lookup_ints(dev, node, prop_name, prop_data);
404 		if (rv < 0)
405 			rv = di_prom_prop_lookup_ints(ph, node, prop_name,
406 			    prop_data);
407 	}
408 	return (rv);
409 }
410 
411 
412 static int
413 di_propall_lookup_strings(di_prom_handle_t ph, int flags,
414     dev_t dev, di_node_t node, const char *prop_name, char **prop_data)
415 {
416 	int rv;
417 
418 	if (flags & DIPROP_PRI_PROM) {
419 		rv = di_prom_prop_lookup_strings(ph, node, prop_name,
420 		    prop_data);
421 		if (rv < 0)
422 			rv = di_prop_lookup_strings(dev, node, prop_name,
423 			    prop_data);
424 	} else {
425 		rv = di_prop_lookup_strings(dev, node, prop_name, prop_data);
426 		if (rv < 0)
427 			rv = di_prom_prop_lookup_strings(ph, node, prop_name,
428 			    prop_data);
429 	}
430 	return (rv);
431 }
432 
433 
434 static di_node_t
435 pci_cfg_chassis_node(di_node_t node, di_prom_handle_t ph)
436 {
437 	di_node_t curnode = node;
438 	int *firstchas;
439 
440 	do {
441 		if (di_propall_lookup_ints(ph, 0, DDI_DEV_T_ANY, curnode,
442 		    DI_PROP_FIRST_CHAS, &firstchas) >= 0)
443 			return (curnode);
444 	} while ((curnode = di_parent_node(curnode)) != DI_NODE_NIL);
445 
446 	return (DI_NODE_NIL);
447 }
448 
449 
450 static int
451 di_propall_lookup_slot_names(di_prom_handle_t ph, int flags,
452     dev_t dev, di_node_t node, di_slot_name_t **prop_data)
453 {
454 	int rv;
455 
456 	if (flags & DIPROP_PRI_PROM) {
457 		rv = di_prom_prop_lookup_slot_names(ph, node, prop_data);
458 		if (rv < 0)
459 			rv = di_prop_lookup_slot_names(dev, node, prop_data);
460 	} else {
461 		rv = di_prop_lookup_slot_names(dev, node, prop_data);
462 		if (rv < 0)
463 			rv = di_prom_prop_lookup_slot_names(ph, node,
464 			    prop_data);
465 	}
466 	return (rv);
467 }
468 
469 /*
470  * returns an allocated string containing the slot name for the slot with
471  * device number <pci_dev> on bus <node>
472  */
473 static char *
474 pci_cfg_slotname(di_node_t node, di_prom_handle_t ph, minor_t pci_dev)
475 {
476 #ifdef	DEBUG
477 	char *fnm = "pci_cfg_slotname";
478 #endif
479 	int i, count;
480 	char *name = NULL;
481 	di_slot_name_t *slot_names = NULL;
482 
483 	count = di_propall_lookup_slot_names(ph, 0, DDI_DEV_T_ANY, node,
484 	    &slot_names);
485 	if (count < 0)
486 		return (NULL);
487 
488 	for (i = 0; i < count; i++) {
489 		if (slot_names[i].num == (int)pci_dev) {
490 			name = strdup(slot_names[i].name);
491 			break;
492 		}
493 	}
494 #ifdef	DEBUG
495 	if (name == NULL)
496 		dprint(("%s: slot w/ pci_dev %d not found in %s for %s%d\n",
497 		    fnm, (int)pci_dev, DI_PROP_SLOT_NAMES, DRVINST(node)));
498 #endif
499 	if (count > 0)
500 		di_slot_names_free(count, slot_names);
501 	return (name);
502 }
503 
504 
505 /*
506  * returns non-zero if we can return a valid attachment point name for <node>,
507  * for its slot identified by child pci device number <pci_dev>, through <buf>
508  *
509  * prioritized naming scheme:
510  *	1) <DI_PROP_SLOT_NAMES property>    (see pci_cfg_slotname())
511  *	2) <device-type><DI_PROP_PHYS_SLOT property>
512  *	3) <drv name><drv inst>.<device-type><pci_dev>
513  *
514  * where <device-type> is derived from the DI_PROP_DEV_TYPE property:
515  *	if its value is "pciex" then <device-type> is "pcie"
516  *	else the raw value is used
517  *
518  * if <flags> contains APNODE_DEFNAME, then scheme (3) is used
519  */
520 static int
521 pci_cfg_ap_node(minor_t pci_dev, di_node_t node, di_prom_handle_t ph,
522     char *buf, int bufsz, int flags)
523 {
524 	int *nump;
525 	int rv;
526 	char *str, *devtype;
527 
528 	rv = di_propall_lookup_strings(ph, 0, DDI_DEV_T_ANY, node,
529 	    DI_PROP_DEV_TYPE, &devtype);
530 	if (rv < 1)
531 		return (0);
532 
533 	if (strcmp(devtype, PROPVAL_PCIEX) == 0)
534 		devtype = DEVTYPE_PCIE;
535 
536 	if (flags & APNODE_DEFNAME)
537 		goto DEF;
538 
539 	str = pci_cfg_slotname(node, ph, pci_dev);
540 	if (str != NULL) {
541 		(void) strlcpy(buf, str, bufsz);
542 		free(str);
543 		return (1);
544 	}
545 
546 	if (di_propall_lookup_ints(ph, 0, DDI_DEV_T_ANY, node,
547 	    DI_PROP_PHYS_SLOT, &nump) > 0) {
548 		if (*nump > 0) {
549 			(void) snprintf(buf, bufsz, "%s%d", devtype, *nump);
550 			return (1);
551 		}
552 	}
553 DEF:
554 	(void) snprintf(buf, bufsz, "%s%d.%s%d",
555 	    di_driver_name(node), di_instance(node), devtype, pci_dev);
556 
557 	return (1);
558 }
559 
560 
561 /*
562  * returns non-zero if we can return a valid expansion chassis name for <node>
563  * through <buf>
564  *
565  * prioritized naming scheme:
566  *	1) <IOB_PRE string><DI_PROP_SERID property: sun specific portion>
567  *	2) <IOB_PRE string><full DI_PROP_SERID property in hex>
568  *	3) <IOB_PRE string>
569  *
570  * DI_PROP_SERID encoding <64-bit int: msb ... lsb>:
571  * <24 bits: IEEE company id><40 bits: serial number>
572  *
573  * sun encoding of 40 bit serial number:
574  * first byte = device type indicator
575  * next 4 bytes = 4 ascii characters
576  *
577  * In the unlikely event that serial id contains non-printable characters
578  * the full 64 bit raw hex string will be used for the attachment point.
579  */
580 /*ARGSUSED*/
581 static int
582 pci_cfg_iob_name(di_minor_t minor, di_node_t node, di_prom_handle_t ph,
583     char *buf, int bufsz)
584 {
585 	int64_t *seridp;
586 	uint64_t serid;
587 	char *idstr;
588 
589 	if (di_prop_lookup_int64(DDI_DEV_T_ANY, node, DI_PROP_SERID,
590 	    &seridp) < 1) {
591 		(void) strlcpy(buf, IOB_PRE, bufsz);
592 		return (1);
593 	}
594 
595 	serid = (uint64_t)*seridp;
596 
597 	if ((serid >> 40) != (uint64_t)IEEE_SUN_ID ||
598 	    !serid_printable(&serid)) {
599 		(void) snprintf(buf, bufsz, "%s%llx", IOB_PRE, serid);
600 		return (1);
601 	}
602 
603 	/*
604 	 * the serial id is constructed from lower 40 bits of the serialid
605 	 * property and is represented by 5 ascii characters. The first
606 	 * character indicates if the IO Box is PCIe or PCI-X.
607 	 */
608 
609 	serid <<= 24;
610 	idstr = (char *)&serid;
611 	idstr[sizeof (serid) -1] = '\0';
612 
613 	(void) snprintf(buf, bufsz, "%s%s", IOB_PRE, idstr);
614 
615 	return (1);
616 }
617 
618 
619 /*
620  * returns the pci device number for <node> if found, else returns PCIDEV_NIL
621  */
622 static minor_t
623 pci_cfg_pcidev(di_node_t node, di_prom_handle_t ph)
624 {
625 	int rv;
626 	int *regp;
627 
628 	rv = di_propall_lookup_ints(ph, 0, DDI_DEV_T_ANY, node, DI_PROP_REG,
629 	    &regp);
630 
631 	if (rv < 1) {
632 		dprint(("pci_cfg_pcidev: property %s not found "
633 		    "for %s%d\n", DI_PROP_REG, DRVINST(node)));
634 		return (PCIDEV_NIL);
635 	}
636 
637 	return (REG_PCIDEV(regp));
638 }
639 
640 
641 /*
642  * returns non-zero when it can successfully return an attachment point
643  * through <ap_path> whose length is less than <ap_pathsz>; returns the full
644  * path of the AP through <pathret> which may be larger than <ap_pathsz>.
645  * Callers need to free <pathret>.  If it cannot return the full path through
646  * <pathret> it will be set to NULL
647  *
648  * The ap path reflects a subset of the device path from an onboard host slot
649  * up to <node>.  We traverse up the device tree starting from <node>, naming
650  * each component using pci_cfg_ap_node().  If we detect that a certain
651  * segment is contained within an expansion chassis, then we skip any bus
652  * nodes in between our current node and the topmost node of the chassis,
653  * which is identified by the DI_PROP_FIRST_CHAS property, and prepend the name
654  * of the expansion chassis as given by pci_cfg_iob_name()
655  *
656  * This scheme is always used for <pathret>.  If however, the size of
657  * <pathret> is greater than <ap_pathsz> then only the default name as given
658  * by pci_cfg_ap_node() for <node> will be used
659  */
660 static int
661 pci_cfg_ap_path(di_minor_t minor, di_node_t node, di_prom_handle_t ph,
662     char *ap_path, int ap_pathsz, char **pathret)
663 {
664 #ifdef	DEBUG
665 	char *fnm = "pci_cfg_ap_path";
666 #endif
667 #define	seplen		(sizeof (AP_PATH_SEP) - 1)
668 #define	iob_pre_len	(sizeof (IOB_PRE) - 1)
669 #define	ap_path_iob_sep_len	(sizeof (AP_PATH_IOB_SEP) - 1)
670 
671 	char *bufptr;
672 	char buf[MAXPATHLEN];
673 	char pathbuf[MAXPATHLEN];
674 	int bufsz;
675 	char *pathptr;
676 	char *pathend = NULL;
677 	int len;
678 	int rv = 0;
679 	int chasflag = 0;
680 	di_node_t curnode = node;
681 	di_node_t chasnode = DI_NODE_NIL;
682 	minor_t pci_dev;
683 
684 	buf[0] = '\0';
685 	pathbuf[0] = '\0';
686 	pathptr = &pathbuf[sizeof (pathbuf) - 1];
687 	*pathptr = '\0';
688 
689 	/*
690 	 * as we traverse up the device tree, we prepend components of our
691 	 * path inside pathbuf, using pathptr and decrementing
692 	 */
693 	pci_dev = PCIHP_AP_MINOR_NUM_TO_PCI_DEVNUM(di_minor_devt(minor));
694 	do {
695 		bufptr = buf;
696 		bufsz = sizeof (buf);
697 
698 		chasnode = pci_cfg_chassis_node(curnode, ph);
699 		if (chasnode != DI_NODE_NIL) {
700 			rv = pci_cfg_iob_name(minor, chasnode, ph,
701 			    bufptr, bufsz);
702 			if (rv == 0) {
703 				dprint(("%s: cannot create iob name "
704 				    "for %s%d\n", fnm, DRVINST(node)));
705 				*pathptr = '\0';
706 				goto OUT;
707 			}
708 
709 			(void) strncat(bufptr, AP_PATH_IOB_SEP, bufsz);
710 			len = strlen(bufptr);
711 			bufptr += len;
712 			bufsz -= len - 1;
713 
714 			/* set chasflag when the leaf node is within an iob */
715 			if ((curnode == node) != NULL)
716 				chasflag = 1;
717 		}
718 		rv = pci_cfg_ap_node(pci_dev, curnode, ph, bufptr, bufsz, 0);
719 		if (rv == 0) {
720 			dprint(("%s: cannot create ap node name "
721 			    "for %s%d\n", fnm, DRVINST(node)));
722 			*pathptr = '\0';
723 			goto OUT;
724 		}
725 
726 		/*
727 		 * if we can't fit the entire path in our pathbuf, then use
728 		 * the default short name and nullify pathptr; also, since
729 		 * we prepend in the buffer, we must avoid adding a null char
730 		 */
731 		if (curnode != node) {
732 			pathptr -= seplen;
733 			if (pathptr < pathbuf) {
734 				pathptr = pathbuf;
735 				*pathptr = '\0';
736 				goto DEF;
737 			}
738 			(void) memcpy(pathptr, AP_PATH_SEP, seplen);
739 		}
740 		len = strlen(buf);
741 		pathptr -= len;
742 		if (pathptr < pathbuf) {
743 			pathptr = pathbuf;
744 			*pathptr = '\0';
745 			goto DEF;
746 		}
747 		(void) memcpy(pathptr, buf, len);
748 
749 		/* remember the leaf component */
750 		if (curnode == node)
751 			pathend = pathptr;
752 
753 		/*
754 		 * go no further than the hosts' onboard slots
755 		 */
756 		if (chasnode == DI_NODE_NIL)
757 			break;
758 		curnode = chasnode;
759 
760 		/*
761 		 * the pci device number of the current node is used to
762 		 * identify which slot of the parent's bus (next iteration)
763 		 * the current node is on
764 		 */
765 		pci_dev = pci_cfg_pcidev(curnode, ph);
766 		if (pci_dev == PCIDEV_NIL) {
767 			dprint(("%s: cannot obtain pci device number "
768 			    "for %s%d\n", fnm, DRVINST(node)));
769 			*pathptr = '\0';
770 			goto OUT;
771 		}
772 	} while ((curnode = di_parent_node(curnode)) != DI_NODE_NIL);
773 
774 	pathbuf[sizeof (pathbuf) - 1] = '\0';
775 	if (strlen(pathptr) < ap_pathsz) {
776 		(void) strlcpy(ap_path, pathptr, ap_pathsz);
777 		rv = 1;
778 		goto OUT;
779 	}
780 
781 DEF:
782 	/*
783 	 * when our name won't fit <ap_pathsz> we use the endpoint/leaf
784 	 * <node>'s name ONLY IF it has a serialid# which will make the apid
785 	 * globally unique
786 	 */
787 	if (chasflag && pathend != NULL) {
788 		if ((strncmp(pathend + iob_pre_len, AP_PATH_IOB_SEP,
789 		    ap_path_iob_sep_len) != 0) &&
790 		    (strlen(pathend) < ap_pathsz)) {
791 			(void) strlcpy(ap_path, pathend, ap_pathsz);
792 			rv = 1;
793 			goto OUT;
794 		}
795 	}
796 
797 	/*
798 	 * if our name still won't fit <ap_pathsz>, then use the leaf <node>'s
799 	 * default name
800 	 */
801 	pci_dev = PCIHP_AP_MINOR_NUM_TO_PCI_DEVNUM(di_minor_devt(minor));
802 	rv = pci_cfg_ap_node(pci_dev, node, ph, buf, bufsz, APNODE_DEFNAME);
803 	if (rv == 0) {
804 		dprint(("%s: cannot create default ap node name for %s%d\n",
805 		    fnm, DRVINST(node)));
806 		*pathptr = '\0';
807 		goto OUT;
808 	}
809 	if (strlen(buf) < ap_pathsz) {
810 		(void) strlcpy(ap_path, buf, ap_pathsz);
811 		rv = 1;
812 		goto OUT;
813 	}
814 
815 	/*
816 	 * in this case, cfgadm goes through an expensive process to generate
817 	 * a purely dynamic logical apid: the framework will look through
818 	 * the device tree for attachment point minor nodes and will invoke
819 	 * each plugin responsible for that attachment point class, and if
820 	 * the plugin returns a logical apid that matches the queried apid
821 	 * or matches the default apid generated by the cfgadm framework for
822 	 * that driver/class (occurs when plugin returns an empty logical apid)
823 	 * then that is what it will use
824 	 *
825 	 * it is doubly expensive because the cfgadm pci plugin itself will
826 	 * also search the entire device tree in the absence of a link
827 	 */
828 	rv = 0;
829 	dprint(("%s: cannot create apid for %s%d within length of %d\n",
830 	    fnm, DRVINST(node), ap_pathsz));
831 
832 OUT:
833 	ap_path[ap_pathsz - 1] = '\0';
834 	*pathret = (*pathptr == '\0') ? NULL : strdup(pathptr);
835 	return (rv);
836 
837 #undef	seplen
838 #undef	iob_pre_len
839 #undef	ap_path_iob_sep_len
840 }
841 
842 
843 /*
844  * the DI_PROP_AP_NAMES property contains the first integer section of the
845  * ieee1275 "slot-names" property and functions as a bitmask; see comment for
846  * pci_cfg_slotname()
847  *
848  * we use the name of the attachment point minor node if its pci device
849  * number (encoded in the minor number) is allowed by DI_PROP_AP_NAMES
850  *
851  * returns non-zero if we return a valid attachment point through <path>
852  */
853 static int
854 pci_cfg_ap_legacy(di_minor_t minor, di_node_t node, di_prom_handle_t ph,
855     char *ap_path, int ap_pathsz)
856 {
857 	minor_t pci_dev;
858 	int *anp;
859 
860 	if (di_propall_lookup_ints(ph, 0, DDI_DEV_T_ANY, node, DI_PROP_AP_NAMES,
861 	    &anp) < 1)
862 		return (0);
863 
864 	pci_dev = PCIHP_AP_MINOR_NUM_TO_PCI_DEVNUM(di_minor_devt(minor));
865 	if ((*anp & (1 << pci_dev)) == 0)
866 		return (0);
867 
868 	(void) strlcpy(ap_path, di_minor_name(minor), ap_pathsz);
869 	return (1);
870 }
871 
872 
873 /*
874  * determine if <node> qualifies for a path style apid
875  */
876 static int
877 pci_cfg_is_ap_path(di_node_t node, di_prom_handle_t ph)
878 {
879 	char *devtype;
880 	di_node_t curnode = node;
881 
882 	do {
883 		if (di_propall_lookup_strings(ph, 0, DDI_DEV_T_ANY, curnode,
884 		    DI_PROP_DEV_TYPE, &devtype) > 0)
885 			if (strcmp(devtype, PROPVAL_PCIEX) == 0)
886 				return (1);
887 	} while ((curnode = di_parent_node(curnode)) != DI_NODE_NIL);
888 
889 	return (0);
890 }
891 
892 
893 /*
894  * takes a full path as returned by <pathret> from pci_cfg_ap_path() and
895  * returns an allocated string intendend to be stored in a devlink info (dli)
896  * file
897  *
898  * data format: "Location: <transformed path>"
899  * where <transformed path> is <path> with occurrances of AP_PATH_SEP
900  * replaced by "/"
901  */
902 static char *
903 pci_cfg_info_data(char *path)
904 {
905 #define	head	"Location: "
906 #define	headlen	(sizeof (head) - 1)
907 #define	seplen	(sizeof (AP_PATH_SEP) - 1)
908 
909 	char *sep, *prev, *np;
910 	char *newpath;
911 	int pathlen = strlen(path);
912 	int len;
913 
914 	newpath = malloc(sizeof (char) * (headlen + pathlen + 1));
915 	np = newpath;
916 	(void) strcpy(np, head);
917 	np += headlen;
918 
919 	prev = path;
920 	while ((sep = strstr(prev, AP_PATH_SEP)) != NULL) {
921 		len = sep - prev;
922 		(void) memcpy(np, prev, len);
923 		np += len;
924 		*np++ = '/';
925 		prev = sep + seplen;
926 	}
927 	(void) strcpy(np, prev);
928 	return (newpath);
929 
930 #undef	head
931 #undef	headlen
932 #undef	seplen
933 }
934 
935 
936 static void
937 pci_cfg_rm_link(char *file)
938 {
939 	char *dlipath;
940 
941 	dlipath = di_dli_name(file);
942 	(void) unlink(dlipath);
943 
944 	devfsadm_rm_all(file);
945 	free(dlipath);
946 }
947 
948 /*
949  * removes all registered devlinks to physical path <physpath> except for
950  * the devlink <valid> if not NULL;
951  * <physpath> must include the minor node
952  */
953 static void
954 pci_cfg_rm_invalid_links(char *physpath, char *valid)
955 {
956 	char **dnp;
957 	char *cp, *vcp;
958 	int i, dnlen;
959 
960 	dnp = devfsadm_lookup_dev_names(physpath, NULL, &dnlen);
961 	if (dnp == NULL)
962 		return;
963 
964 	if (valid != NULL) {
965 		if (strncmp(valid, DEV "/", DEV_LEN + 1) == 0)
966 			vcp = valid + DEV_LEN + 1;
967 		else
968 			vcp = valid;
969 	}
970 
971 	for (i = 0; i < dnlen; i++) {
972 		if (strncmp(dnp[i], DEV "/", DEV_LEN + 1) == 0)
973 			cp = dnp[i] + DEV_LEN + 1;
974 		else
975 			cp = dnp[i];
976 
977 		if (valid != NULL) {
978 			if (strcmp(vcp, cp) == 0)
979 				continue;
980 		}
981 		pci_cfg_rm_link(cp);
982 	}
983 	devfsadm_free_dev_names(dnp, dnlen);
984 }
985 
986 
987 /*
988  * takes a complete devinfo snapshot and returns the root node;
989  * callers must do a di_fini() on the returned node;
990  * if the snapshot failed, DI_NODE_NIL is returned instead
991  *
992  * if <pci_node> is not DI_NODE_NIL, it will search for the same devinfo node
993  * in the new snapshot and return it through <ret_node> if it is found,
994  * else DI_NODE_NIL is returned instead
995  *
996  * in addition, if <pci_minor> is not DI_MINOR_NIL, it will also return
997  * the matching minor in the new snapshot through <ret_minor> if it is found,
998  * else DI_MINOR_NIL is returned instead
999  */
1000 static di_node_t
1001 pci_cfg_snapshot(di_node_t pci_node, di_minor_t pci_minor,
1002     di_node_t *ret_node, di_minor_t *ret_minor)
1003 {
1004 	di_node_t root_node;
1005 	di_node_t node;
1006 	di_minor_t minor;
1007 	int pci_inst;
1008 	dev_t pci_devt;
1009 
1010 	*ret_node = DI_NODE_NIL;
1011 	*ret_minor = DI_MINOR_NIL;
1012 
1013 	root_node = di_init("/", DINFOCPYALL);
1014 	if (root_node == DI_NODE_NIL)
1015 		return (DI_NODE_NIL);
1016 
1017 	/*
1018 	 * narrow down search by driver, then instance, then minor
1019 	 */
1020 	if (pci_node == DI_NODE_NIL)
1021 		return (root_node);
1022 
1023 	pci_inst = di_instance(pci_node);
1024 	node = di_drv_first_node(di_driver_name(pci_node), root_node);
1025 	do {
1026 		if (pci_inst == di_instance(node)) {
1027 			*ret_node = node;
1028 			break;
1029 		}
1030 	} while ((node = di_drv_next_node(node)) != DI_NODE_NIL);
1031 
1032 	if (node == DI_NODE_NIL)
1033 		return (root_node);
1034 
1035 	/*
1036 	 * found node, now search minors
1037 	 */
1038 	if (pci_minor == DI_MINOR_NIL)
1039 		return (root_node);
1040 
1041 	pci_devt = di_minor_devt(pci_minor);
1042 	minor = DI_MINOR_NIL;
1043 	while ((minor = di_minor_next(node, minor)) != DI_MINOR_NIL) {
1044 		if (pci_devt == di_minor_devt(minor)) {
1045 			*ret_minor = minor;
1046 			break;
1047 		}
1048 	}
1049 	return (root_node);
1050 }
1051 
1052 
1053 static int
1054 pci_cfg_creat_cb(di_minor_t pci_minor, di_node_t pci_node)
1055 {
1056 #ifdef	DEBUG
1057 	char *fnm = "pci_cfg_creat_cb";
1058 #endif
1059 #define	ap_pathsz	(sizeof (ap_path))
1060 
1061 	char ap_path[CFGA_LOG_EXT_LEN];
1062 	char linkbuf[MAXPATHLEN];
1063 	char *fullpath = NULL;
1064 	char *pathinfo = NULL;
1065 	char *devpath = NULL;
1066 	int rv, fd = -1;
1067 	size_t sz;
1068 	di_prom_handle_t ph;
1069 	di_node_t node;
1070 	di_node_t root_node = DI_NODE_NIL;
1071 	di_minor_t minor;
1072 
1073 	ph = di_prom_init();
1074 	if (ph == DI_PROM_HANDLE_NIL) {
1075 		dprint(("%s: di_prom_init() failed for %s%d\n",
1076 		    fnm, DRVINST(pci_node)));
1077 		goto OUT;
1078 	}
1079 
1080 	/*
1081 	 * Since incoming nodes from hotplug events are from snapshots that
1082 	 * do NOT contain parent/ancestor data, we must retake our own
1083 	 * snapshot and search for the target node
1084 	 */
1085 	root_node = pci_cfg_snapshot(pci_node, pci_minor, &node, &minor);
1086 	if (root_node == DI_NODE_NIL || node == DI_NODE_NIL ||
1087 	    minor == DI_MINOR_NIL) {
1088 		dprint(("%s: devinfo snapshot or search failed for %s%d\n",
1089 		    fnm, DRVINST(pci_node)));
1090 		goto OUT;
1091 	}
1092 
1093 	if (pci_cfg_is_ap_path(node, ph)) {
1094 		rv = pci_cfg_ap_path(minor, node, ph, ap_path, ap_pathsz,
1095 		    &fullpath);
1096 		if (rv == 0)
1097 			goto OUT;
1098 
1099 		(void) snprintf(linkbuf, sizeof (linkbuf), "%s/%s",
1100 		    CFG_DIRNAME, ap_path);
1101 
1102 		/*
1103 		 * We must remove existing links because we may have invalid
1104 		 * apids that are valid links.  Since these are not dangling,
1105 		 * devfsadm will not invoke the remove callback on them.
1106 		 *
1107 		 * What are "invalid apids with valid links"?  Consider swapping
1108 		 * an attachment point bus with another while the system is
1109 		 * down, on the same device path bound to the same drivers
1110 		 * but with the new AP bus having different properties
1111 		 * (e.g. serialid#).  If the previous apid is not removed,
1112 		 * there will now be two different links pointing to the same
1113 		 * attachment point, but only one reflects the correct
1114 		 * logical apid
1115 		 */
1116 		devpath = pci_cfg_devpath(node, minor);
1117 		if (devpath == NULL)
1118 			goto OUT;
1119 		pci_cfg_rm_invalid_links(devpath, linkbuf);
1120 		free(devpath);
1121 
1122 		(void) devfsadm_mklink(linkbuf, node, minor, 0);
1123 
1124 		/*
1125 		 * we store the full logical path of the attachment point for
1126 		 * cfgadm to display in its info field which is useful when
1127 		 * the full logical path exceeds the size limit for logical
1128 		 * apids (CFGA_LOG_EXT_LEN)
1129 		 *
1130 		 * for the cfgadm pci plugin to do the same would be expensive
1131 		 * (i.e. devinfo snapshot + top down exhaustive minor search +
1132 		 * equivalent of pci_cfg_ap_path() on every invocation)
1133 		 *
1134 		 * note that if we do not create a link (pci_cfg_ap_path() is
1135 		 * not successful), that is what cfgadm will do anyways to
1136 		 * create a purely dynamic apid
1137 		 */
1138 		pathinfo = pci_cfg_info_data(fullpath);
1139 		fd = di_dli_openw(linkbuf);
1140 		if (fd < 0)
1141 			goto OUT;
1142 
1143 		sz = strlen(pathinfo) + 1;
1144 		rv = write(fd, pathinfo, sz);
1145 		if (rv < sz) {
1146 			dprint(("%s: could not write full pathinfo to dli "
1147 			    "file for %s%d\n", fnm, DRVINST(node)));
1148 			goto OUT;
1149 		}
1150 		di_dli_close(fd);
1151 	} else {
1152 		rv = pci_cfg_ap_legacy(minor, node, ph, ap_path,
1153 		    ap_pathsz);
1154 		if (rv == 0)
1155 			goto OUT;
1156 
1157 		(void) snprintf(linkbuf, sizeof (linkbuf), "%s/%s",
1158 		    CFG_DIRNAME, ap_path);
1159 		(void) devfsadm_mklink(linkbuf, node, minor, 0);
1160 	}
1161 
1162 OUT:
1163 	if (fd >= 0)
1164 		di_dli_close(fd);
1165 	if (fullpath != NULL)
1166 		free(fullpath);
1167 	if (pathinfo != NULL)
1168 		free(pathinfo);
1169 	if (ph != DI_PROM_HANDLE_NIL)
1170 		di_prom_fini(ph);
1171 	if (root_node != DI_NODE_NIL)
1172 		di_fini(root_node);
1173 	return (DEVFSADM_CONTINUE);
1174 
1175 #undef	ap_pathsz
1176 }
1177 
1178 
1179 static void
1180 pci_cfg_rm_all(char *file)
1181 {
1182 	pci_cfg_rm_link(file);
1183 }
1184 
1185 
1186 /*
1187  * ib_cfg_creat_cb() creates two types of links
1188  * One for the fabric as /dev/cfg/ib
1189  * Another for each HCA seen in the fabric as /dev/cfg/hca:<HCA-GUID>
1190  */
1191 static int
1192 ib_cfg_creat_cb(di_minor_t minor, di_node_t node)
1193 {
1194 	char	*cp;
1195 	char	path[PATH_MAX + 1];
1196 
1197 	if ((cp = di_devfs_path(node)) == NULL) {
1198 		return (DEVFSADM_CONTINUE);
1199 	}
1200 
1201 	(void) snprintf(path, sizeof (path), "%s:%s", cp, di_minor_name(minor));
1202 	di_devfs_path_free(cp);
1203 
1204 	/* create fabric or hca:GUID and the symlink */
1205 	if (strstr(path, "ib:fabric") != NULL) {
1206 		(void) snprintf(path, sizeof (path), "%s/ib", CFG_DIRNAME);
1207 	} else {
1208 		(void) snprintf(path, sizeof (path), "%s/hca:%s", CFG_DIRNAME,
1209 		    di_minor_name(minor));
1210 	}
1211 
1212 	(void) devfsadm_mklink(path, node, minor, 0);
1213 	return (DEVFSADM_CONTINUE);
1214 }
1215 
1216 /*
1217  * This function verifies if the serial id is printable.
1218  */
1219 
1220 static int
1221 serid_printable(uint64_t *seridp)
1222 {
1223 
1224 	char *ptr;
1225 	int i = 0;
1226 
1227 	for (ptr = (char *)seridp+3; i < 5; ptr++, i++)
1228 		if (*ptr < 0x21 || *ptr >= 0x7f)
1229 			return (0);
1230 
1231 	return (1);
1232 
1233 }
1234