1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2007 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# ident "%Z%%M% %I% %E% SMI" 27# 28 29SYNCPROG= syncinit syncloop syncstat 30DHCPPROG= dhcpconfig dhtadm pntadm 31 32# EXPORT DELETE START 33XMODPROG= wanbootutil 34# EXPORT DELETE END 35 36PROG= 6to4relay arp gettable if_mpadm ikeadm ikecert \ 37 in.comsat in.fingerd in.rarpd in.rexecd in.rlogind \ 38 in.rshd in.rwhod in.telnetd in.tftpd ipaddrsel \ 39 ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \ 40 $(XMODPROG) 41 42MANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \ 43 login.xml shell.xml rexec.xml 44 45ROOTFS_PROG= hostconfig route soconfig 46SBINLINKS= hostconfig route 47 48RPCSVCPROG= hostconfig 49AUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd 50PAMPROG= in.rexecd in.rlogind in.rshd in.telnetd 51SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \ 52 in.fingerd in.rarpd in.rexecd in.rlogind in.rshd \ 53 in.rwhod in.telnetd in.tftpd ipaddrsel \ 54 ipsecalgs ipsecconf ipseckey route 55NSLPROG= 6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \ 56 in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \ 57 in.tftpd ipaddrsel ipsecalgs ipsecconf ipseckey route 58CMDPROG= in.telnetd 59IPSECUTILPROG= ikeadm ipsecalgs ipsecconf ipseckey 60K5PROGS= in.telnetd in.rlogind in.rshd 61TSNETPROG= route 62DEFAULTFILES= telnetd.dfl 63 64PROGSRCS= $(PROG:%=%.c) 65TFTPDOBJS= in.tftpd.o tftpsubs.o 66OTHERSRC= ../usr.bin/tftp/tftpsubs.c 67K5RLOGINOBJS= in.rlogind.o 68K5RSHDOBJS= in.rshd.o 69SRCS= $(PROGSRCS) $(OTHERSRC) 70 71SUBDIRS= bootconfchk htable ifconfig in.ftpd in.rdisc in.routed \ 72 in.talkd inetadm inetconv ipqosconf kssl/kssladm \ 73 kssl/ksslcfg mipagentconfig mipagentstat ping routeadm \ 74 snoop sppptun traceroute wificonfig 75 76MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd \ 77 inetadm inetconv ipqosconf kssl/ksslcfg mipagentconfig \ 78 mipagentstat routeadm sppptun snoop wificonfig 79 80# As programs get lint-clean, add them here and to the 'lint' target. 81# Eventually this hack should go away, and all in PROG should be 82# lint-clean. 83LINTCLEAN= 6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \ 84 ipaddrsel ipsecalgs ipseckey ipsecconf route \ 85 in.rarpd if_mpadm $(SYNCPROG) 86# Likewise, as subdirs get lint-clean, add them here. Once 87# they're all clean, replace the dependency of the lint target 88# with SUBDIRS. Also (sigh) deal with the commented-out build lines 89# for the lint rule. 90LINTSUBDIRS= bootconfchk in.rdisc in.routed in.talkd inetadm inetconv \ 91 ipqosconf mipagentstat ping routeadm sppptun traceroute \ 92 wificonfig 93# And as programs are verified not to attempt to write into constants, 94# -xstrconst should be used to ensure they stay that way. 95CONSTCLEAN= ikeadm 96 97include ../../Makefile.cmd 98ROOTMANIFESTDIR= $(ROOTSVCNETWORK) 99$(ROOTMANIFEST) := FILEMODE= 444 100include ../Makefile.cmd-inet 101 102ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%) 103ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%) 104 105COMMONOBJS= addr_match.o kcmd.o 106COMMONSRCS= $(COMMONOBJS:%.o=$(CMDINETCOMMONDIR)/%.c) 107SRCS+= $(COMMONSRCS) 108 109# 110# Message catalog 111# 112POFILES= 6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \ 113 ipsecalgs.po ipsecconf.po ipseckey.po route.po 114POFILE= usr.sbin.po 115 116all:= TARGET= all 117install:= TARGET= install 118clean:= TARGET= clean 119clobber:= TARGET= clobber 120lint:= TARGET= lint 121_msg:= TARGET= _msg 122 123CLOBBERFILES += $(ROOTFS_PROG) $(PROG) 124CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS) 125 126CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I 127 128include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5 129K5LIBS= 130 131# Eventually just plain CFLAGS should be += -v, but not until all in 132# PROGS are lint clean. 133$(LINTCLEAN) := CFLAGS += $(CCVERBOSE) 134$(CONSTCLEAN) := CFLAGS += $(XSTRCONST) 135 136$(SYNCPROG) := LDLIBS += -ldlpi 137$(SOCKETPROG) := LDLIBS += -lsocket 138$(NSLPROG) := LDLIBS += -lnsl 139$(AUDITPROG) := LDLIBS += -lbsm 140$(PAMPROG) := LDLIBS += -lpam 141$(RPCSVCPROG) := LDLIBS += -lrpcsvc 142$(K5PROGS) := LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \ 143 -L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL) 144$(K5PROGS) := K5LIBS= -lmech_krb5 145$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \ 146 -I$(SRC)/uts/common/ \ 147 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 148 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 149 -I$(SRC)/lib/pam_modules/krb5 150LDLIBS += $(K5LIBS) 151$(IPSECUTILPROG) := LDLIBS += -lipsecutil 152$(TSNETPROG) := LDLIBS += $(ZLAZYLOAD) -ltsnet $(ZNOLAZYLOAD) 153 154in.rarpd := LDLIBS += -linetutil 155route := CPPFLAGS += -DNDEBUG 156 157.KEEP_STATE: 158 159.PARALLEL: 160 161all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) THIRDPARTYLICENSE.arp 162 163# 164# message catalog 165# 166_msg: $(MSGSUBDIRS) $(POFILE) 167 168syncutil: $(SYNCPROG) 169 170$(POFILE): $(POFILES) 171 $(RM) $@ 172 cat $(POFILES) > $@ 173 174%.o: $(CMDINETCOMMONDIR)/%.c 175 $(COMPILE.c) -o $@ $< 176 177in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS) 178 $(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 179 $(POST_PROCESS) 180 181in.rshd: $(K5RSHDOBJS) $(COMMONOBJS) 182 $(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 183 $(POST_PROCESS) 184 185in.tftpd: $(TFTPDOBJS) 186 $(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS) 187 $(POST_PROCESS) 188 189tftpsubs.o: $(OTHERSRC) 190 $(COMPILE.c) $(OTHERSRC) -o $@ 191 $(POST_PROCESS_O) 192 193$(ROOTUSRSBINLINKS): 194 -$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@ 195 196install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \ 197 $(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \ 198 $(ROOTMANIFEST) THIRDPARTYLICENSE.arp 199 200THIRDPARTYLICENSE.arp: arp.c 201 $(SED) -n '/University of California/,/SUCH DAMAGE/p' arp.c > $@ 202 203CLOBBERFILES += THIRDPARTYLICENSE.arp 204 205# 206# The reason this rule checks for the existence of the 207# Makefile is that some of the directories do not exist 208# in our exportable source builds. 209# 210$(SUBDIRS): FRC 211 @if [ -f $@/Makefile ]; then \ 212 cd $@; pwd; $(MAKE) $(TARGET); \ 213 else \ 214 true; \ 215 fi 216 217FRC: 218 219check: $(CHKMANIFEST) 220 221clean: $(SUBDIRS) 222 -$(RM) $(CLEANFILES) 223 224clobber: $(SUBDIRS) 225 -$(RM) $(CLEANFILES) $(CLOBBERFILES) 226 227lint: $(LINTSUBDIRS) 228 $(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl 229 $(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl 230 @# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam 231 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 232 -I$(SRC)/head -I$(SRC)/uts/common/ \ 233 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 234 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 235 -I$(SRC)/lib/pam_modules/krb5 \ 236 in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 237 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 238 -I$(SRC)/head -I$(SRC)/uts/common/ \ 239 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 240 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 241 -I$(SRC)/lib/pam_modules/krb5 \ 242 in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 243 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \ 244 -erroff=E_GLOBAL_COULD_BE_STATIC2 \ 245 -I$(SRC)/head -I$(SRC)/uts/common/ \ 246 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 247 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 248 -I$(SRC)/lib/pam_modules/krb5 \ 249 in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl 250 $(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp 251 $(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl 252 $(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil 253 $(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil 254 $(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil 255 $(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil 256 $(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet 257 $(LINT.c) syncinit.c $(LDLIBS) -ldlpi 258 $(LINT.c) syncloop.c $(LDLIBS) -ldlpi 259 $(LINT.c) syncstat.c $(LDLIBS) -ldlpi 260 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \ 261 -lsocket -lnsl 262 $(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \ 263 -lsocket -lnsl 264 265# EXPORT DELETE START 266EXPORT_SRC: 267 $(RM) Makefile+ 268 sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \ 269 < Makefile > Makefile+ 270 $(RM) Makefile 271 $(MV) Makefile+ Makefile 272 $(CHMOD) 444 Makefile 273# EXPORT DELETE END 274