1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20 21 22# 23# 24# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 25# Use is subject to license terms. 26# 27# ident "%Z%%M% %I% %E% SMI" 28# 29 30SYNCPROG= syncinit syncloop syncstat 31DHCPPROG= dhcpconfig dhtadm pntadm 32 33# EXPORT DELETE START 34XMODPROG= wanbootutil 35# EXPORT DELETE END 36 37PROG= 6to4relay arp gettable if_mpadm ikeadm ikecert \ 38 in.comsat in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind \ 39 in.rshd in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \ 40 ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \ 41 $(XMODPROG) 42 43MANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \ 44 login.xml shell.xml rexec.xml tname.xml 45 46ROOTFS_PROG= hostconfig route routeadm soconfig 47SBINLINKS= hostconfig route routeadm 48 49RPCSVCPROG= hostconfig 50AUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd 51PAMPROG= in.rexecd in.rlogind in.rshd in.telnetd 52SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \ 53 in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind in.rshd \ 54 in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \ 55 ipsecalgs ipsecconf ipseckey route routeadm 56NSLPROG= 6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \ 57 in.rdisc in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \ 58 in.tftpd in.tnamed ipaddrsel ipsecalgs ipsecconf ipseckey route 59CMDPROG= in.telnetd 60IPSECUTILPROG= ikeadm ipsecalgs ipsecconf ipseckey 61K5PROGS= in.telnetd in.rlogind in.rshd 62TSNETPROG= route 63DEFAULTFILES= telnetd.dfl 64 65PROGSRCS= $(PROG:%=%.c) 66TFTPDOBJS= in.tftpd.o tftpsubs.o 67OTHERSRC= ../usr.bin/tftp/tftpsubs.c 68K5RLOGINOBJS= in.rlogind.o 69K5RSHDOBJS= in.rshd.o 70SRCS= $(PROGSRCS) $(OTHERSRC) 71 72SUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed \ 73 in.talkd inetadm inetconv ipqosconf kssl/kssladm \ 74 kssl/ksslcfg mipagentconfig mipagentstat ping snoop \ 75 sppptun traceroute wificonfig 76 77MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd \ 78 inetadm inetconv ipqosconf kssl/ksslcfg mipagentconfig \ 79 mipagentstat sppptun snoop wificonfig 80 81# As programs get lint-clean, add them here and to the 'lint' target. 82# Eventually this hack should go away, and all in PROG should be 83# lint-clean. 84LINTCLEAN= 6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \ 85 ipaddrsel ipsecalgs ipseckey ipsecconf route routeadm \ 86 in.rarpd if_mpadm $(SYNCPROG) 87# Likewise, as subdirs get lint-clean, add them here. Once 88# they're all clean, replace the dependency of the lint target 89# with SUBDIRS. Also (sigh) deal with the commented-out build lines 90# for the lint rule. 91LINTSUBDIRS= bootconfchk in.routed in.talkd inetadm inetconv ipqosconf \ 92 mipagentstat ping sppptun traceroute wificonfig 93# And as programs are verified not to attempt to write into constants, 94# -xstrconst should be used to ensure they stay that way. 95CONSTCLEAN= ikeadm 96 97include ../../Makefile.cmd 98ROOTMANIFESTDIR= $(ROOTSVCNETWORK) 99$(ROOTMANIFEST) := FILEMODE= 444 100include ../Makefile.cmd-inet 101 102ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%) 103ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%) 104 105COMMONOBJS= kcmd.o 106COMMONSRCS= $(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c) 107SRCS+= $(COMMONSRCS) 108 109# 110# Message catalog 111# 112POFILES= 6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \ 113 ipsecalgs.po ipsecconf.po ipseckey.po route.po routeadm.po 114POFILE= usr.sbin.po 115 116all:= TARGET= all 117install:= TARGET= install 118clean:= TARGET= clean 119clobber:= TARGET= clobber 120lint:= TARGET= lint 121_msg:= TARGET= _msg 122 123CLOBBERFILES += $(ROOTFS_PROG) $(PROG) 124CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS) 125 126CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I. 127 128include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5 129K5LIBS= 130 131# Eventually just plain CFLAGS should be += -v, but not until all in 132# PROGS are lint clean. 133$(LINTCLEAN) := CFLAGS += $(CCVERBOSE) 134$(CONSTCLEAN) := CFLAGS += $(XSTRCONST) 135 136$(SYNCPROG) := LDLIBS += -ldlpi 137$(SOCKETPROG) := LDLIBS += -lsocket 138$(NSLPROG) := LDLIBS += -lnsl 139$(AUDITPROG) := LDLIBS += -lbsm 140$(PAMPROG) := LDLIBS += -lpam 141$(RPCSVCPROG) := LDLIBS += -lrpcsvc 142$(CMDPROG) := LDLIBS += -lcmd 143$(K5PROGS) := LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \ 144 -L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL) 145$(K5PROGS) := K5LIBS= -lmech_krb5 146$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \ 147 -I$(SRC)/uts/common/ \ 148 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 149 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 150 -I$(SRC)/lib/pam_modules/krb5 151LDLIBS += $(K5LIBS) 152$(IPSECUTILPROG) := LDLIBS += -lipsecutil 153$(TSNETPROG) := LDLIBS += $(ZLAZYLOAD) -ltsnet $(ZNOLAZYLOAD) 154 155in.rarpd := LDLIBS += -linetutil 156route := CPPFLAGS += -DNDEBUG 157 158.KEEP_STATE: 159 160.PARALLEL: 161 162all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) 163 164# 165# message catalog 166# 167_msg: $(MSGSUBDIRS) $(POFILE) 168 169syncutil: $(SYNCPROG) 170 171$(POFILE): $(POFILES) 172 $(RM) $@ 173 cat $(POFILES) > $@ 174 175$(COMMONOBJS): $(COMMONSRCS) 176 $(COMPILE.c) $(COMMONSRCS) 177 178in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS) 179 $(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 180 $(POST_PROCESS) 181 182in.rshd: $(K5RSHDOBJS) $(COMMONOBJS) 183 $(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 184 $(POST_PROCESS) 185 186in.tftpd: $(TFTPDOBJS) 187 $(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS) 188 $(POST_PROCESS) 189 190tftpsubs.o: $(OTHERSRC) 191 $(COMPILE.c) $(OTHERSRC) -o $@ 192 $(POST_PROCESS_O) 193 194$(ROOTUSRSBINLINKS): 195 -$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@ 196 197install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \ 198 $(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \ 199 $(ROOTMANIFEST) 200 201# 202# The reason this rule checks for the existence of the 203# Makefile is that some of the directories do not exist 204# in our exportable source builds. 205# 206$(SUBDIRS): FRC 207 @if [ -f $@/Makefile ]; then \ 208 cd $@; pwd; $(MAKE) $(TARGET); \ 209 else \ 210 true; \ 211 fi 212 213FRC: 214 215check: $(CHKMANIFEST) 216 217clean: $(SUBDIRS) 218 -$(RM) $(CLEANFILES) 219 220clobber: $(SUBDIRS) 221 -$(RM) $(CLEANFILES) $(CLOBBERFILES) 222 223lint: $(LINTSUBDIRS) 224 $(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl 225 $(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl 226 @# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam 227 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 228 -I$(SRC)/head -I$(SRC)/uts/common/ \ 229 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 230 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 231 -I$(SRC)/lib/pam_modules/krb5 \ 232 in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 233 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 234 -I$(SRC)/head -I$(SRC)/uts/common/ \ 235 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 236 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 237 -I$(SRC)/lib/pam_modules/krb5 \ 238 in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 239 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \ 240 -erroff=E_GLOBAL_COULD_BE_STATIC2 \ 241 -I$(SRC)/head -I$(SRC)/uts/common/ \ 242 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 243 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 244 -I$(SRC)/lib/pam_modules/krb5 \ 245 in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl 246 $(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp 247 $(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl 248 $(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil 249 $(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil 250 $(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil 251 $(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil 252 $(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet 253 $(LINT.c) routeadm.c $(LDLIBS) -lsocket 254 $(LINT.c) syncinit.c $(LDLIBS) -ldlpi 255 $(LINT.c) syncloop.c $(LDLIBS) -ldlpi 256 $(LINT.c) syncstat.c $(LDLIBS) -ldlpi 257 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \ 258 -lsocket -lnsl 259 $(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \ 260 -lsocket -lnsl 261 262# EXPORT DELETE START 263EXPORT_SRC: 264 $(RM) Makefile+ 265 sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \ 266 < Makefile > Makefile+ 267 $(RM) Makefile 268 $(MV) Makefile+ Makefile 269 $(CHMOD) 444 Makefile 270# EXPORT DELETE END 271