1*7c478bd9Sstevel@tonic-gate# 2*7c478bd9Sstevel@tonic-gate# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 3*7c478bd9Sstevel@tonic-gate# Use is subject to license terms. 4*7c478bd9Sstevel@tonic-gate# 5*7c478bd9Sstevel@tonic-gate# CDDL HEADER START 6*7c478bd9Sstevel@tonic-gate# 7*7c478bd9Sstevel@tonic-gate# The contents of this file are subject to the terms of the 8*7c478bd9Sstevel@tonic-gate# Common Development and Distribution License, Version 1.0 only 9*7c478bd9Sstevel@tonic-gate# (the "License"). You may not use this file except in compliance 10*7c478bd9Sstevel@tonic-gate# with the License. 11*7c478bd9Sstevel@tonic-gate# 12*7c478bd9Sstevel@tonic-gate# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 13*7c478bd9Sstevel@tonic-gate# or http://www.opensolaris.org/os/licensing. 14*7c478bd9Sstevel@tonic-gate# See the License for the specific language governing permissions 15*7c478bd9Sstevel@tonic-gate# and limitations under the License. 16*7c478bd9Sstevel@tonic-gate# 17*7c478bd9Sstevel@tonic-gate# When distributing Covered Code, include this CDDL HEADER in each 18*7c478bd9Sstevel@tonic-gate# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 19*7c478bd9Sstevel@tonic-gate# If applicable, add the following below this CDDL HEADER, with the 20*7c478bd9Sstevel@tonic-gate# fields enclosed by brackets "[]" replaced with your own identifying 21*7c478bd9Sstevel@tonic-gate# information: Portions Copyright [yyyy] [name of copyright owner] 22*7c478bd9Sstevel@tonic-gate# 23*7c478bd9Sstevel@tonic-gate# CDDL HEADER END 24*7c478bd9Sstevel@tonic-gate# 25*7c478bd9Sstevel@tonic-gate#ident "%Z%%M% %I% %E% SMI" 26*7c478bd9Sstevel@tonic-gate# 27*7c478bd9Sstevel@tonic-gate# Each caller type that appears in the Devices file (5th field) 28*7c478bd9Sstevel@tonic-gate# should appear in this file except for the built in callers. 29*7c478bd9Sstevel@tonic-gate# Each line consists of three parts: 30*7c478bd9Sstevel@tonic-gate# - the name of the caller 31*7c478bd9Sstevel@tonic-gate# - the translation table for the phone number to translate from 32*7c478bd9Sstevel@tonic-gate# the 801 codes (=-) to the code for the particular device 33*7c478bd9Sstevel@tonic-gate# - a chat script (same format and meaning as the login scripts 34*7c478bd9Sstevel@tonic-gate# that appear in the Systems file. 35*7c478bd9Sstevel@tonic-gate# 36*7c478bd9Sstevel@tonic-gate# Meaning of some of the escape characters: 37*7c478bd9Sstevel@tonic-gate# \p - pause (approximately 1/4-1/2 second delay) 38*7c478bd9Sstevel@tonic-gate# \d - delay (2 seconds) 39*7c478bd9Sstevel@tonic-gate# \D - phone number/token 40*7c478bd9Sstevel@tonic-gate# \T - phone number with Dialcodes and character translation 41*7c478bd9Sstevel@tonic-gate# \N - null byte 42*7c478bd9Sstevel@tonic-gate# \K - insert a BREAK 43*7c478bd9Sstevel@tonic-gate# \E - turn on echo checking (for slow devices) 44*7c478bd9Sstevel@tonic-gate# \e - turn off echo checking 45*7c478bd9Sstevel@tonic-gate# \r - carriage return 46*7c478bd9Sstevel@tonic-gate# \c - no new-line 47*7c478bd9Sstevel@tonic-gate# \n - send new-line 48*7c478bd9Sstevel@tonic-gate# \nnn - send octal number 49*7c478bd9Sstevel@tonic-gate# 50*7c478bd9Sstevel@tonic-gate# See the Administration Documentation for more details. 51*7c478bd9Sstevel@tonic-gate# 52*7c478bd9Sstevel@tonic-gate# NOTE: blank lines and lines that begin with a <space>, <tab>, or # are ignored 53*7c478bd9Sstevel@tonic-gate 54*7c478bd9Sstevel@tonic-gatepenril =W-P "" \d > Q\c : \d- > s\p9\c )-W\p\r\ds\p9\c-) y\c : \E\TP > 9\c OK 55*7c478bd9Sstevel@tonic-gateventel =&-% "" \r\p\r\c $ <K\T%%\r>\c ONLINE! 56*7c478bd9Sstevel@tonic-gatevadic =K-K "" \005\p *-\005\p-*\005\p-* D\p BER? \E\T\e \r\c LINE 57*7c478bd9Sstevel@tonic-gatedevelcon "" "" \pr\ps\c est:\007 \E\D\e \n\007 58*7c478bd9Sstevel@tonic-gatemicom "" "" \s\c NAME? \D\r\c GO 59*7c478bd9Sstevel@tonic-gatedirect 60*7c478bd9Sstevel@tonic-gate########## 61*7c478bd9Sstevel@tonic-gate# The following entry is for use with direct connections 62*7c478bd9Sstevel@tonic-gate# using ttymon with the -b and -r options on both ends, 63*7c478bd9Sstevel@tonic-gate# or the old uugetty with the -r option. 64*7c478bd9Sstevel@tonic-gate########## 65*7c478bd9Sstevel@tonic-gateuudirect "" "" \r\d in:--in: 66*7c478bd9Sstevel@tonic-gate 67*7c478bd9Sstevel@tonic-gate# Rixon Intelligent Modem -- modem should be set up in the Rixon 68*7c478bd9Sstevel@tonic-gate# mode and not the Hayes mode. 69*7c478bd9Sstevel@tonic-gate# 70*7c478bd9Sstevel@tonic-gaterixon =&-% "" \r\r\d $ s9\c )-W\r\ds9\c-) s\c : \T\r\c $ 9\c LINE 71*7c478bd9Sstevel@tonic-gate 72*7c478bd9Sstevel@tonic-gate# Hayes Smartmodem -- modem should be set with the configuration 73*7c478bd9Sstevel@tonic-gate# switches as follows: 74*7c478bd9Sstevel@tonic-gate# 75*7c478bd9Sstevel@tonic-gate# S1 - UP S2 - UP S3 - DOWN S4 - UP 76*7c478bd9Sstevel@tonic-gate# S5 - UP S6 - DOWN S7 - ? S8 - DOWN 77*7c478bd9Sstevel@tonic-gate# 78*7c478bd9Sstevel@tonic-gatehayes =,-, "" \dA\pTE1V1X1Q0S2=255S12=255\r\c OK\r \EATDT\T\r\c CONNECT 79*7c478bd9Sstevel@tonic-gate 80*7c478bd9Sstevel@tonic-gate# USR Courier V.32 and Sportster 81*7c478bd9Sstevel@tonic-gate# Set the switches as follows: 82*7c478bd9Sstevel@tonic-gate# 83*7c478bd9Sstevel@tonic-gate# 1 2 3 4 5 6 7 8 9 10 84*7c478bd9Sstevel@tonic-gate# U U D U U U D D D U Courier 85*7c478bd9Sstevel@tonic-gate# U U D U U U U D Sportster 86*7c478bd9Sstevel@tonic-gate# 87*7c478bd9Sstevel@tonic-gateusrv32-ec =,-, "" \dA\pTE1V1X1Q0S2=255S12=255&A0&H1&M5&B2\r\c OK\r \EATDT\T\r\c CONNECT STTY=crtscts,crtsxoff 88*7c478bd9Sstevel@tonic-gateusrv32-nec =,-, "" \dA\pTE1V1X1Q0S2=255S12=255&A0&H1&M0&B0\r\c OK\r \EATDT\T\r\c CONNECT STTY=crtscts,crtsxoff 89*7c478bd9Sstevel@tonic-gate 90*7c478bd9Sstevel@tonic-gate# Telebit TrailBlazer 91*7c478bd9Sstevel@tonic-gate# 92*7c478bd9Sstevel@tonic-gatetb1200 =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=2\r\c OK\r \EATDT\T\r\c CONNECT\s1200 93*7c478bd9Sstevel@tonic-gatetb2400 =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=3\r\c OK\r \EATDT\T\r\c CONNECT\s2400 94*7c478bd9Sstevel@tonic-gatetbfast =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=255\r\c OK\r \EATDT\T\r\c CONNECT\sFAST 95*7c478bd9Sstevel@tonic-gate 96*7c478bd9Sstevel@tonic-gate# Telebit T1600 97*7c478bd9Sstevel@tonic-gate# 98*7c478bd9Sstevel@tonic-gatetb9600-ec =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=6\r\c OK\r \EATDT\T\r\c CONNECT\s9600 STTY=crtscts,crtsxoff 99*7c478bd9Sstevel@tonic-gatetb9600-nec =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=6S180=0\r\c OK\r \EATDT\T\r\c CONNECT\s9600 STTY=crtscts,crtsxoff 100*7c478bd9Sstevel@tonic-gate 101*7c478bd9Sstevel@tonic-gate########## 102*7c478bd9Sstevel@tonic-gate# AT&T Programmable 300/1200 Modem Model 4000 103*7c478bd9Sstevel@tonic-gate# 104*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 105*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 106*7c478bd9Sstevel@tonic-gate# =,-, Use comma for secondary dial tone & for pause 107*7c478bd9Sstevel@tonic-gate# "" expect nothing 108*7c478bd9Sstevel@tonic-gate# ATZ\r\p\p enter command mode, reset modem, 109*7c478bd9Sstevel@tonic-gate# OK\r expect modem to reply OK 110*7c478bd9Sstevel@tonic-gate# ATZ\r enter command mode, reset modem 111*7c478bd9Sstevel@tonic-gate# OK\r expect modem to reply OK 112*7c478bd9Sstevel@tonic-gate# \E turn on echo check mode 113*7c478bd9Sstevel@tonic-gate# ATDT\T\r\c enter command mode, tone dial the number 114*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 115*7c478bd9Sstevel@tonic-gate# \T\r\c phone number to dial 116*7c478bd9Sstevel@tonic-gate# CONNECT expect "CONNECT" from modem when connected 117*7c478bd9Sstevel@tonic-gate########## 118*7c478bd9Sstevel@tonic-gateatt4000 =,-, "" ATZ\r\p\p OK\r ATZ\r OK\r\c \EATDT\T\r\c CONNECT 119*7c478bd9Sstevel@tonic-gate 120*7c478bd9Sstevel@tonic-gate########## 121*7c478bd9Sstevel@tonic-gate# AT&T Model 4024 Modem 122*7c478bd9Sstevel@tonic-gate# 123*7c478bd9Sstevel@tonic-gate# For normal operation, dip switch 4 should be CLOSED. 124*7c478bd9Sstevel@tonic-gate# This disables ENTER INTERACTIVE WITH <CR>. 125*7c478bd9Sstevel@tonic-gate# 126*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 127*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 128*7c478bd9Sstevel@tonic-gate# =,-, Use comma for secondary dial tone & for pause 129*7c478bd9Sstevel@tonic-gate# "" expect nothing 130*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset modem, set options to default 131*7c478bd9Sstevel@tonic-gate# o12=y, set option 12 to 'y' (transparent data mode) 132*7c478bd9Sstevel@tonic-gate# o4=n\r\c set option 4 to 'n' (don't disconnect on rcvd spaces) 133*7c478bd9Sstevel@tonic-gate# \006 expect ACK from modem 134*7c478bd9Sstevel@tonic-gate# atT\T\r\c enter command mode, tone dial the number 135*7c478bd9Sstevel@tonic-gate# ed expect "ed" (actually "Answered") 136*7c478bd9Sstevel@tonic-gate# 137*7c478bd9Sstevel@tonic-gate# Once transparent data mode is enabled, you 138*7c478bd9Sstevel@tonic-gate# cannot enter the interactive mode from the data mode. 139*7c478bd9Sstevel@tonic-gate########## 140*7c478bd9Sstevel@tonic-gateatt4024 =+-, "" atzod,o12=y,o4=n\r\c \006 atT\T\r\c ed 141*7c478bd9Sstevel@tonic-gate 142*7c478bd9Sstevel@tonic-gate########## 143*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2212C Modem 144*7c478bd9Sstevel@tonic-gate# 145*7c478bd9Sstevel@tonic-gate# For normal operation, dip switch 4 should be CLOSED. 146*7c478bd9Sstevel@tonic-gate# This disables ENTER INTERACTIVE WITH <CR>. 147*7c478bd9Sstevel@tonic-gate# 148*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 149*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 150*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 151*7c478bd9Sstevel@tonic-gate# "" expect nothing 152*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset modem, set options to default 153*7c478bd9Sstevel@tonic-gate# o12=y, set option 12 to 'y' (transparent data mode) 154*7c478bd9Sstevel@tonic-gate# o4=n, set option 4 to 'n' (don't disconnect on rcvd spaces) 155*7c478bd9Sstevel@tonic-gate# \006 Wait for ACK 156*7c478bd9Sstevel@tonic-gate# atT\T\r\c enter command mode, tone dial the number 157*7c478bd9Sstevel@tonic-gate# ed expect "ed" (actually "Answered") 158*7c478bd9Sstevel@tonic-gate# 159*7c478bd9Sstevel@tonic-gate# Once transparent data mode is enabled, you 160*7c478bd9Sstevel@tonic-gate# cannot enter the interactive mode from the data mode. 161*7c478bd9Sstevel@tonic-gate########## 162*7c478bd9Sstevel@tonic-gateatt2212c =+-, "" atzod,o12=y,o4=n\r\c \006 atT\T\r\c ed 163*7c478bd9Sstevel@tonic-gateatt2212C =+-, "" atzod,o12=y,o4=n\r\c \006 atT\T\r\c ed 164*7c478bd9Sstevel@tonic-gate 165*7c478bd9Sstevel@tonic-gate########## 166*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2224B Modem 167*7c478bd9Sstevel@tonic-gate# 168*7c478bd9Sstevel@tonic-gate# For normal operation dip switch S1 switch 2 should be OPEN. 169*7c478bd9Sstevel@tonic-gate# This disables ENTER INTERACTIVE WITH <CR>. 170*7c478bd9Sstevel@tonic-gate# 171*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 172*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 173*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 174*7c478bd9Sstevel@tonic-gate# "" expect nothing 175*7c478bd9Sstevel@tonic-gate# atT\T\r\c enter command mode, tone dial the number 176*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 177*7c478bd9Sstevel@tonic-gate# ed expect "ed" (actually "Answered") 178*7c478bd9Sstevel@tonic-gate########## 179*7c478bd9Sstevel@tonic-gateatt2224b =+-, "" atT\T\r\c ed 180*7c478bd9Sstevel@tonic-gateatt2224B =+-, "" atT\T\r\c ed 181*7c478bd9Sstevel@tonic-gate 182*7c478bd9Sstevel@tonic-gate########## 183*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2224CEO Modem 184*7c478bd9Sstevel@tonic-gate# 185*7c478bd9Sstevel@tonic-gate# The 2224CEO Modem supports MNP error control protocol. 186*7c478bd9Sstevel@tonic-gate# This entry will use MNP if it is also available on the 187*7c478bd9Sstevel@tonic-gate# remote end. 188*7c478bd9Sstevel@tonic-gate# 189*7c478bd9Sstevel@tonic-gate# For normal operation, dip switch S1 switch 3 should be UP. 190*7c478bd9Sstevel@tonic-gate# This disables ENTER INTERACTIVE WITH <CR>. 191*7c478bd9Sstevel@tonic-gate# 192*7c478bd9Sstevel@tonic-gate# When used with an EPORTS board on a 3B2, it is recommended that 193*7c478bd9Sstevel@tonic-gate# hardware flow control be enabled on the board and that the 194*7c478bd9Sstevel@tonic-gate# corresponding second set of entries below be used. 195*7c478bd9Sstevel@tonic-gate# (i.e. change \\q0 to \\q3 below - use CTS/RTS flow control) 196*7c478bd9Sstevel@tonic-gate# 197*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 198*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 199*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 200*7c478bd9Sstevel@tonic-gate# "" expect nothing 201*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset options to default values, 202*7c478bd9Sstevel@tonic-gate# o12=y, set option 12 to 'y' (transparent data mode) 203*7c478bd9Sstevel@tonic-gate# o4=n, set option 4 to 'n' (don't disconnect on rcvd spaces) 204*7c478bd9Sstevel@tonic-gate# \\n3 select normal operating mode 205*7c478bd9Sstevel@tonic-gate# \\c1 modem does not buffer data 206*7c478bd9Sstevel@tonic-gate# \\j0 do not autobaud modem serial port 207*7c478bd9Sstevel@tonic-gate# \\q0 no flow control 208*7c478bd9Sstevel@tonic-gate# \\g0\r\c no modem port flow control 209*7c478bd9Sstevel@tonic-gate# \006 Wait for ACK 210*7c478bd9Sstevel@tonic-gate# atT\T\r\c enter command mode, tone dial the number 211*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 212*7c478bd9Sstevel@tonic-gate# Connected expect "ed" (actually "Connected") 213*7c478bd9Sstevel@tonic-gate# 214*7c478bd9Sstevel@tonic-gate# Once transparent data mode is enabled, you 215*7c478bd9Sstevel@tonic-gate# cannot enter the interactive mode from the data mode. 216*7c478bd9Sstevel@tonic-gate########## 217*7c478bd9Sstevel@tonic-gateatt2224ceo =+-, "" atzod,o12=y,o4=n,\\n3\\c1\\j0\\q0\\g0\r\c \006 atT\T\r\c Connected 218*7c478bd9Sstevel@tonic-gateatt2224CEO =+-, "" atzod,o12=y,o4=n,\\n3\\c1\\j0\\q0\\g0\r\c \006 atT\T\r\c Connected 219*7c478bd9Sstevel@tonic-gate#att2224ceo =+-, "" atzod,o12=y,o4=n,\\n3\\c1\\j0\\q3\\g0\r\c \006 atT\T\r\c Connected 220*7c478bd9Sstevel@tonic-gate#att2224CEO =+-, "" atzod,o12=y,o4=n,\\n3\\c1\\j0\\q3\\g0\r\c \006 atT\T\r\c Connected 221*7c478bd9Sstevel@tonic-gate 222*7c478bd9Sstevel@tonic-gate########## 223*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2224G Modem 224*7c478bd9Sstevel@tonic-gate# 225*7c478bd9Sstevel@tonic-gate# The 2224G Modem supports MNP error control protocol. 226*7c478bd9Sstevel@tonic-gate# This entry will use MNP if it is also available on the 227*7c478bd9Sstevel@tonic-gate# remote end. 228*7c478bd9Sstevel@tonic-gate# 229*7c478bd9Sstevel@tonic-gate# For normal operation, dip switch S1 switch 3 should be RIGHT. 230*7c478bd9Sstevel@tonic-gate# This disables ENTER INTERACTIVE WITH <CR>. 231*7c478bd9Sstevel@tonic-gate# 232*7c478bd9Sstevel@tonic-gate# When used with an EPORTS board on a 3B2, it is recommended that 233*7c478bd9Sstevel@tonic-gate# hardware flow control be enabled on the board and that the 234*7c478bd9Sstevel@tonic-gate# corresponding second set of entries below be used. 235*7c478bd9Sstevel@tonic-gate# (i.e. change \\q0 to \\q3 below - use CTS/RTS flow control) 236*7c478bd9Sstevel@tonic-gate# 237*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 238*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 239*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 240*7c478bd9Sstevel@tonic-gate# "" expect nothing 241*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset options to default values, 242*7c478bd9Sstevel@tonic-gate# o12=y, set option 12 to 'y' (transparent data mode) 243*7c478bd9Sstevel@tonic-gate# o4=n, set option 4 to 'n' (don't disconnect on rcvd spaces) 244*7c478bd9Sstevel@tonic-gate# o1=n\r\c set option 1 to 'n' (don't wait for far end sense first) 245*7c478bd9Sstevel@tonic-gate# \006 Wait for ACK 246*7c478bd9Sstevel@tonic-gate# atz enter command mode 247*7c478bd9Sstevel@tonic-gate# \\n3 select auto-reliable operating mode 248*7c478bd9Sstevel@tonic-gate# \\c1 select auto-reliable buffering scheme 1 249*7c478bd9Sstevel@tonic-gate# \\j0 do not autobaud modem serial port 250*7c478bd9Sstevel@tonic-gate# \\q0 no flow control 251*7c478bd9Sstevel@tonic-gate# \\g0\r\c no modem port flow control 252*7c478bd9Sstevel@tonic-gate# \datT\T\r\c delay, enter command mode, tone dial the number 253*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 254*7c478bd9Sstevel@tonic-gate# Connected expect "Connected" 255*7c478bd9Sstevel@tonic-gate# 256*7c478bd9Sstevel@tonic-gate# Once transparent data mode is enabled, you 257*7c478bd9Sstevel@tonic-gate# cannot enter the interactive mode from the data mode. 258*7c478bd9Sstevel@tonic-gate########## 259*7c478bd9Sstevel@tonic-gateatt2224g =+-, "" atzod,o12=y,o4=n,o1=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 260*7c478bd9Sstevel@tonic-gateatt2224G =+-, "" atzod,o12=y,o4=n,o1=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 261*7c478bd9Sstevel@tonic-gate#att2224g =+-, "" atzod,o12=y,o4=n,o1=n\r\c \006 atz\\n3\\c1\\j0\\q3\\g0\r\c "" \datT\T\r\c Connected 262*7c478bd9Sstevel@tonic-gate#att2224G =+-, "" atzod,o12=y,o4=n,o1=n\r\c \006 atz\\n3\\c1\\j0\\q3\\g0\r\c "" \datT\T\r\c Connected 263*7c478bd9Sstevel@tonic-gate 264*7c478bd9Sstevel@tonic-gate########## 265*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2224 Modem 266*7c478bd9Sstevel@tonic-gate# 267*7c478bd9Sstevel@tonic-gate# This entry is for 2224 with the optional automatic caller. 268*7c478bd9Sstevel@tonic-gate# Is is provided only to provide compatibility with previous 269*7c478bd9Sstevel@tonic-gate# releases. The entry for the specific model modem you own 270*7c478bd9Sstevel@tonic-gate# should be found above. 271*7c478bd9Sstevel@tonic-gate# 272*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 273*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 274*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 275*7c478bd9Sstevel@tonic-gate# "" expect nothing 276*7c478bd9Sstevel@tonic-gate# \r\c send carriage return to enter interactive mode 277*7c478bd9Sstevel@tonic-gate# :--: expect colon. if don't see it, send newline 278*7c478bd9Sstevel@tonic-gate# and expect colon again. 279*7c478bd9Sstevel@tonic-gate# T\T\r\c dial the given number, using touch-tone signaling 280*7c478bd9Sstevel@tonic-gate# (change the first T to P if you want to use pulse 281*7c478bd9Sstevel@tonic-gate# dialing). 282*7c478bd9Sstevel@tonic-gate# red expect "red" (actually "Answered") 283*7c478bd9Sstevel@tonic-gate########## 284*7c478bd9Sstevel@tonic-gateatt2224 =+-, "" \r\c :--: T\T\r\c red 285*7c478bd9Sstevel@tonic-gate 286*7c478bd9Sstevel@tonic-gate########## 287*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2248A Modem 288*7c478bd9Sstevel@tonic-gate# 289*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 290*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 291*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 292*7c478bd9Sstevel@tonic-gate# "" expect nothing 293*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset modem, set options to default 294*7c478bd9Sstevel@tonic-gate# o12=y\r\c set option 12 to 'y' (transparent data mode) 295*7c478bd9Sstevel@tonic-gate# \006 Wait for ACK 296*7c478bd9Sstevel@tonic-gate# atT\T\r\c enter command mode, tone dial the number 297*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 298*7c478bd9Sstevel@tonic-gate# Connected expect "Connected" 299*7c478bd9Sstevel@tonic-gate# 300*7c478bd9Sstevel@tonic-gate########## 301*7c478bd9Sstevel@tonic-gateatt2248a =+-, "" atzod,o12=y\r\c \006 atT\T\r\c Connected 302*7c478bd9Sstevel@tonic-gateatt2248A =+-, "" atzod,o12=y\r\c \006 atT\T\r\c Connected 303*7c478bd9Sstevel@tonic-gate 304*7c478bd9Sstevel@tonic-gate########## 305*7c478bd9Sstevel@tonic-gate# AT&T DATAPHONE II 2296A Modem 306*7c478bd9Sstevel@tonic-gate# 307*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 308*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 309*7c478bd9Sstevel@tonic-gate# =+-, '+' for secondary dial tone, ',' for pause 310*7c478bd9Sstevel@tonic-gate# "" expect nothing 311*7c478bd9Sstevel@tonic-gate# atzod, enter command mode, reset options to default values, 312*7c478bd9Sstevel@tonic-gate# o12=y, set option 12 to 'y' (transparent data mode) 313*7c478bd9Sstevel@tonic-gate# o50=y, set option 50 to 'y' 314*7c478bd9Sstevel@tonic-gate# o51=n, set option 51 to 'n' (don't strap CTS/RTS) 315*7c478bd9Sstevel@tonic-gate# o55=n, set option 55 to 'n' (CD does not indicate carrier) 316*7c478bd9Sstevel@tonic-gate# o69=n,\r\c set option 69 to 'n' 317*7c478bd9Sstevel@tonic-gate# \006 Wait for ACK 318*7c478bd9Sstevel@tonic-gate# atz enter command mode 319*7c478bd9Sstevel@tonic-gate# \\n3 select auto-reliable operating mode 320*7c478bd9Sstevel@tonic-gate# \\c1 select auto-reliable buffering scheme 1 321*7c478bd9Sstevel@tonic-gate# \\j0 do not autobaud modem serial port 322*7c478bd9Sstevel@tonic-gate# \\q0 no flow control 323*7c478bd9Sstevel@tonic-gate# \\g0\r\c no modem port flow control 324*7c478bd9Sstevel@tonic-gate# \datT\T\r\c delay, enter command mode, tone dial the number 325*7c478bd9Sstevel@tonic-gate# (substitute 'P' for first 'T' for pulse dialing) 326*7c478bd9Sstevel@tonic-gate# Connected expect "Connected" 327*7c478bd9Sstevel@tonic-gate# 328*7c478bd9Sstevel@tonic-gate# When used with an EPORTS board on a 3B2, it is recommended that 329*7c478bd9Sstevel@tonic-gate# hardware flow control be enabled on the board and that the 330*7c478bd9Sstevel@tonic-gate# corresponding second set of entries below be used. 331*7c478bd9Sstevel@tonic-gate# (i.e. change \\q0 to \\q3 below - use CTS/RTS flow control) 332*7c478bd9Sstevel@tonic-gate# 333*7c478bd9Sstevel@tonic-gate########## 334*7c478bd9Sstevel@tonic-gateatt2296a =+-, "" atzod,o12=y,o50=y,o51=n,o55=n,o69=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 335*7c478bd9Sstevel@tonic-gateatt2296A =+-, "" atzod,o12=y,o50=y,o51=n,o55=n,o69=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 336*7c478bd9Sstevel@tonic-gate#att2296a =+-, "" atzod,o12=y,o50=y,o51=n,o55=n,o69=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 337*7c478bd9Sstevel@tonic-gate#att2296A =+-, "" atzod,o12=y,o50=y,o51=n,o55=n,o69=n\r\c \006 atz\\n3\\c1\\j0\\q0\\g0\r\c "" \datT\T\r\c Connected 338*7c478bd9Sstevel@tonic-gate 339*7c478bd9Sstevel@tonic-gate########## 340*7c478bd9Sstevel@tonic-gate# Network Listener Service 341*7c478bd9Sstevel@tonic-gate# The format of the request to the listener is 342*7c478bd9Sstevel@tonic-gate# NLPS:000:001:<service_code>\N\c 343*7c478bd9Sstevel@tonic-gate# where <service_code> determines what server the listener invokes. 344*7c478bd9Sstevel@tonic-gate# The entry below asks for service code 1. 345*7c478bd9Sstevel@tonic-gate# 346*7c478bd9Sstevel@tonic-gate# If cu & uucico use different service codes, you will have to use 347*7c478bd9Sstevel@tonic-gate# separate Dialers files (e.g., Dialers.cico and Dialers.cu). 348*7c478bd9Sstevel@tonic-gate# See comments in Sysfiles for instructions. 349*7c478bd9Sstevel@tonic-gate########## 350*7c478bd9Sstevel@tonic-gatenls "" "" NLPS:000:001:1\N\c 351*7c478bd9Sstevel@tonic-gate 352*7c478bd9Sstevel@tonic-gate########## 353*7c478bd9Sstevel@tonic-gate# DATAKIT(r) serial port connection script 354*7c478bd9Sstevel@tonic-gate# 355*7c478bd9Sstevel@tonic-gate# Commands: Explanation: 356*7c478bd9Sstevel@tonic-gate# ------------ --------------------------------------------------- 357*7c478bd9Sstevel@tonic-gate# "" no special character translation table 358*7c478bd9Sstevel@tonic-gate# "" expect nothing 359*7c478bd9Sstevel@tonic-gate# \d delay to give some settling time 360*7c478bd9Sstevel@tonic-gate# TION:--TION: wait for the DESTINATION: prompt, if it does not come 361*7c478bd9Sstevel@tonic-gate# send a carriage return and wait again. 362*7c478bd9Sstevel@tonic-gate# \D send the specified token 363*7c478bd9Sstevel@tonic-gate########## 364*7c478bd9Sstevel@tonic-gatedatakit "" "" \d TION:--TION: \D 365