xref: /illumos-gate/usr/src/cmd/autopush/autopush.c (revision c81d47afd05baeb768e2f032636019b717899efd)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 1999-2003 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
28 /*	  All Rights Reserved  	*/
29 
30 
31 #pragma ident	"%Z%%M%	%I%	%E% SMI"
32 
33 /*
34  * autopush(1) is the command interface to the STREAMS autopush
35  * mechanism.  The autopush command can be used to configure autopush
36  * information about a STREAMS driver, remove autopush information,
37  * and report on current configuration information.  Its use is as
38  * follows:
39  *
40  *	autopush -f file
41  *	autopush -r -M major -m minor
42  *	autopush -g -M major -m minor
43  *
44  * The -f option allows autopush information to be set from a file.  The
45  * format of the file is as follows:
46  *
47  * # Comment lines begin with a # in column one.
48  * # The fields are separated by white space and are:
49  * # major	minor	lastminor	module1 module2 ... module8
50  *
51  * "lastminor" is used to configure ranges of minor devices, from "minor"
52  * to "lastminor" inclusive.  It should be set to zero when not in use.
53  * The -r option allows autopush information to be removed for the given
54  * major/minor pair.  The -g option allows the configuration information
55  * to be printed.  The format of printing is the same as for the file.
56  */
57 
58 /*
59  * Use autopush version 1; keep before #include <sys/sad.h>.
60  * See <sys/sad.h> for details.
61  */
62 #define	AP_VERSION	1
63 
64 #include <sys/types.h>
65 #include <sys/conf.h>
66 #include <sys/modctl.h>
67 #include <sys/sad.h>
68 #include <stdio.h>
69 #include <fcntl.h>
70 #include <errno.h>
71 #include <ctype.h>
72 #include <stdlib.h>
73 #include <unistd.h>
74 #include <string.h>
75 #include <locale.h>
76 #include <sys/stat.h>
77 
78 #define	OPTIONS	"M:f:gm:r"	/* command line options for getopt(3C) */
79 #define	COMMENT	'#'
80 #define	MINUS	'-'
81 #define	SLASH	'/'
82 
83 /*
84  * Output format.
85  */
86 #define	OHEADER		"     Major      Minor  Lastminor\tModules\n"
87 #define	OFORMAT1_ONE	"%10ld %10ld      -    \t"
88 #define	OFORMAT1_RANGE	"%10ld %10ld %10ld\t"
89 #define	OFORMAT1_ALL	"%10ld       ALL       -    \t"
90 
91 #define	AP_ANCHOR	"[anchor]"
92 
93 #define	Openerr		gettext("%s: ERROR: Could not open %s: ")
94 #define	Digiterr	gettext("%s: ERROR: argument to %s option must be " \
95 			    "numeric\n")
96 #define	Badline		gettext("%s: WARNING: File %s: bad input line %d " \
97 			    "ignored\n")
98 
99 static void	usage();
100 static int	rem_info(), get_info(), set_info();
101 static int	is_white_space(), parse_line();
102 
103 static char	*Cmdp;		/* command name */
104 
105 /*
106  * main():
107  *	process command line arguments.
108  */
109 int
110 main(int argc, char *argv[])
111 {
112 	int		c;		/* character read by getopt(3C) */
113 	char		*filenamep;	/* name of configuration file */
114 	major_t		major;		/* major device number */
115 	minor_t		minor;		/* minor device number */
116 	char		*cp;
117 	int		exitcode;
118 	ushort_t	minflag = 0;	/* -m option used */
119 	ushort_t	majflag = 0;	/* -M option used */
120 	ushort_t	fflag = 0;	/* -f option used */
121 	ushort_t	rflag = 0;	/* -r option used */
122 	ushort_t	gflag = 0;	/* -g option used */
123 	ushort_t	errflag = 0;	/* options usage error */
124 
125 	(void) setlocale(LC_ALL, "");
126 #if !defined(TEXT_DOMAIN)
127 #define	TEXT_DOMAIN "SYS_TEST"
128 #endif
129 	(void) textdomain(TEXT_DOMAIN);
130 
131 	/*
132 	 * Get command name.
133 	 */
134 	Cmdp = argv[0];
135 	for (filenamep = argv[0]; *filenamep; filenamep++)
136 		if (*filenamep == SLASH)
137 			Cmdp = filenamep + 1;
138 
139 	/*
140 	 * Get options.
141 	 */
142 	while (!errflag && ((c = getopt(argc, argv, OPTIONS)) != -1)) {
143 		switch (c) {
144 		case 'M':
145 			if (fflag|majflag)
146 				errflag++;
147 			else {
148 				majflag++;
149 				for (cp = optarg; *cp; cp++)
150 					if (!isdigit(*cp)) {
151 						(void) fprintf(stderr,
152 						    Digiterr, Cmdp, "-M");
153 						exit(1);
154 					}
155 				major = (major_t)atol(optarg);
156 			}
157 			break;
158 
159 		case 'm':
160 			if (fflag|minflag)
161 				errflag++;
162 			else {
163 				minflag++;
164 				for (cp = optarg; *cp; cp++)
165 					if (!isdigit(*cp)) {
166 						(void) fprintf(stderr,
167 						    Digiterr, Cmdp, "-m");
168 						exit(1);
169 					}
170 				minor = (minor_t)atol(optarg);
171 			}
172 			break;
173 
174 		case 'f':
175 			if (fflag|gflag|rflag|majflag|minflag)
176 				errflag++;
177 			else {
178 				fflag++;
179 				filenamep = optarg;
180 			}
181 			break;
182 
183 		case 'r':
184 			if (fflag|gflag|rflag)
185 				errflag++;
186 			else
187 				rflag++;
188 			break;
189 
190 		case 'g':
191 			if (fflag|gflag|rflag)
192 				errflag++;
193 			else
194 				gflag++;
195 			break;
196 
197 		default:
198 			errflag++;
199 			break;
200 		} /* switch */
201 		if (errflag) {
202 			usage();
203 			exit(1);
204 		}
205 	} /* while */
206 	if (((gflag || rflag) && (!majflag || !minflag)) || (optind != argc)) {
207 		usage();
208 		exit(1);
209 	}
210 	if (fflag)
211 		exitcode = set_info(filenamep);
212 	else if (rflag)
213 		exitcode = rem_info(major, minor);
214 	else if (gflag)
215 		exitcode = get_info(major, minor);
216 	else {
217 		usage();
218 		exit(1);
219 	}
220 
221 	return (exitcode);
222 }
223 
224 /*
225  * usage():
226  *	print out usage statement.
227  */
228 static void
229 usage()
230 {
231 	(void) fprintf(stderr,	gettext("%s: USAGE:\n\t%s -f filename\n"
232 	    "\t%s -r -M major -m minor\n"
233 	    "\t%s -g -M major -m minor\n"), Cmdp, Cmdp, Cmdp, Cmdp);
234 }
235 
236 /*
237  * set_info():
238  *	set autopush configuration information.
239  *	namep: autopush configuration filename
240  */
241 static int
242 set_info(char *namep)
243 {
244 	int		line;		/* line number of file */
245 	FILE		*fp;		/* file pointer of config file */
246 	char		buf[256];	/* input buffer */
247 	struct strapush push;		/* configuration information */
248 	int		sadfd;		/* file descriptor to SAD driver */
249 	int		retcode = 0;	/* return code */
250 	int		parsecode;	/* return value from parse function */
251 
252 	if ((sadfd = open(ADMINDEV, O_RDWR)) < 0) {
253 		(void) fprintf(stderr, Openerr, Cmdp, ADMINDEV);
254 		perror("");
255 		return (1);
256 	}
257 	if ((fp = fopen(namep, "r")) == NULL) {
258 		(void) fprintf(stderr, Openerr, Cmdp, namep);
259 		perror("");
260 		return (1);
261 	}
262 	line = 0;
263 	while (fgets(buf, sizeof (buf), fp) != NULL) {
264 		line++;
265 		if ((buf[0] == COMMENT) || is_white_space(buf))
266 			continue;
267 		(void) memset(&push, 0, sizeof (struct strapush));
268 
269 		parsecode = parse_line(buf, line, namep, &push);
270 		if (parsecode != 0) {
271 			retcode = parsecode;
272 			continue;
273 		}
274 
275 		if (push.sap_minor == (minor_t)-1)
276 			push.sap_cmd = SAP_ALL;
277 		else if (push.sap_lastminor == 0)
278 			push.sap_cmd = SAP_ONE;
279 		else
280 			push.sap_cmd = SAP_RANGE;
281 
282 		if (ioctl(sadfd, SAD_SAP, &push) < 0) {
283 			int error = errno;
284 
285 			retcode = 1;
286 			(void) fprintf(stderr,
287 			    gettext("%s: ERROR: File %s: could not configure "
288 			    "autopush for line %d\n"), Cmdp, namep, line);
289 			switch (error) {
290 			case EPERM:
291 				(void) fprintf(stderr, gettext("%s: ERROR: "
292 				    "You don't have permission to set autopush "
293 				    "information\n"), Cmdp);
294 				break;
295 
296 			case EINVAL:
297 				(void) fprintf(stderr, gettext("%s: ERROR: "
298 				    "Invalid major device number or invalid "
299 				    "module name or too many modules\n"), Cmdp);
300 				break;
301 
302 			case ENOSTR:
303 				(void) fprintf(stderr, gettext("%s: ERROR: "
304 				    "Major device is not a STREAMS "
305 				    "driver\n"), Cmdp);
306 				break;
307 
308 			case EEXIST:
309 				(void) fprintf(stderr, gettext("%s: ERROR: "
310 				    "Major/minor already configured\n"), Cmdp);
311 				break;
312 
313 			case ENOSR:
314 				(void) fprintf(stderr, gettext("%s: ERROR: Ran "
315 				    "out of autopush structures\n"), Cmdp);
316 				break;
317 
318 			case ERANGE:
319 				(void) fprintf(stderr, gettext("%s: ERROR: "
320 				    "lastminor must be greater than minor\n"),
321 				    Cmdp);
322 				break;
323 
324 			default:
325 				(void) fprintf(stderr, gettext("%s: ERROR: "),
326 				    Cmdp);
327 				(void) fprintf(stderr, "%s\n", strerror(error));
328 				break;
329 			} /* switch */
330 		} /* if */
331 	} /* while */
332 	return (retcode);
333 }
334 
335 /*
336  * rem_info():
337  *	remove autopush configuration information.
338  */
339 static int
340 rem_info(major_t maj, minor_t min)
341 {
342 	struct strapush push;		/* configuration information */
343 	int		sadfd;		/* file descriptor to SAD driver */
344 	int		retcode = 0;	/* return code */
345 
346 	if ((sadfd = open(ADMINDEV, O_RDWR)) < 0) {
347 		(void) fprintf(stderr, Openerr, Cmdp, ADMINDEV);
348 		perror("");
349 		return (1);
350 	}
351 	push.sap_cmd = SAP_CLEAR;
352 	push.sap_minor = min;
353 	push.sap_major = maj;
354 
355 	if (ioctl(sadfd, SAD_SAP, &push) < 0) {
356 		int error = errno;
357 
358 		retcode = 1;
359 		(void) fprintf(stderr, gettext("%s: ERROR: Could not remove "
360 		    "autopush information\n"), Cmdp);
361 		switch (error) {
362 		case EPERM:
363 			(void) fprintf(stderr, gettext("%s: ERROR: You don't "
364 			    "have permission to remove autopush "
365 			    "information\n"), Cmdp);
366 			break;
367 
368 		case EINVAL:
369 			if ((min != 0) && (ioctl(sadfd, SAD_GAP, &push) == 0) &&
370 			    (push.sap_cmd == SAP_ALL))
371 				(void) fprintf(stderr, gettext("%s: ERROR: "
372 				    "When removing an entry for ALL minors, "
373 				    "minor must be set to 0\n"), Cmdp);
374 			else
375 				(void) fprintf(stderr, gettext("%s: ERROR: "
376 				    "Invalid major device number\n"), Cmdp);
377 			break;
378 
379 		case ENODEV:
380 			(void) fprintf(stderr, gettext("%s: ERROR: Major/minor "
381 			    "not configured for autopush\n"), Cmdp);
382 			break;
383 
384 		case ERANGE:
385 			(void) fprintf(stderr, gettext("%s: ERROR: minor must "
386 			    "be set to begining of range when clearing\n"),
387 			    Cmdp);
388 			break;
389 
390 		default:
391 			(void) fprintf(stderr, gettext("%s: ERROR: "), Cmdp);
392 			(void) fprintf(stderr, "%s\n", strerror(error));
393 			break;
394 		} /* switch */
395 	}
396 	return (retcode);
397 }
398 
399 /*
400  * get_info():
401  *	get autopush configuration information.
402  */
403 static int
404 get_info(major_t maj, minor_t min)
405 {
406 	struct strapush push;	/* configuration information */
407 	int		i;	/* counter */
408 	int		sadfd;	/* file descriptor to SAD driver */
409 
410 	if ((sadfd = open(USERDEV, O_RDWR)) < 0) {
411 		(void) fprintf(stderr, Openerr, Cmdp, USERDEV);
412 		perror("");
413 		return (1);
414 	}
415 	push.sap_major = maj;
416 	push.sap_minor = min;
417 
418 	if (ioctl(sadfd, SAD_GAP, &push) < 0) {
419 		int error = errno;
420 
421 		(void) fprintf(stderr, gettext("%s: ERROR: Could not get "
422 		    "autopush information\n"), Cmdp);
423 		switch (error) {
424 		case EINVAL:
425 			(void) fprintf(stderr, gettext("%s: ERROR: Invalid "
426 			    "major device number\n"), Cmdp);
427 			break;
428 
429 		case ENOSTR:
430 			(void) fprintf(stderr, gettext("%s: ERROR: Major "
431 			    "device is not a STREAMS driver\n"), Cmdp);
432 			break;
433 
434 		case ENODEV:
435 			(void) fprintf(stderr, gettext("%s: ERROR: Major/minor "
436 			    "not configured for autopush\n"), Cmdp);
437 			break;
438 
439 		default:
440 			(void) fprintf(stderr, gettext("%s: ERROR: "), Cmdp);
441 			(void) fprintf(stderr, "%s\n", strerror(error));
442 			break;
443 		} /* switch */
444 		return (1);
445 	}
446 	(void) printf(OHEADER);
447 	switch (push.sap_cmd) {
448 	case SAP_ONE:
449 		(void) printf(OFORMAT1_ONE, push.sap_major, push.sap_minor);
450 		break;
451 
452 	case SAP_RANGE:
453 		(void) printf(OFORMAT1_RANGE, push.sap_major, push.sap_minor,
454 		    push.sap_lastminor);
455 		break;
456 
457 	case SAP_ALL:
458 		(void) printf(OFORMAT1_ALL, push.sap_major);
459 		break;
460 
461 	default:
462 		(void) fprintf(stderr,
463 		    gettext("%s: ERROR: Unknown configuration type\n"), Cmdp);
464 		return (1);
465 	}
466 
467 	for (i = 0; i < push.sap_npush; i++) {
468 
469 		(void) printf("%s", push.sap_list[i]);
470 
471 		if (push.sap_anchor == (i + 1))
472 			(void) printf(" %s", AP_ANCHOR);
473 
474 		if (i < push.sap_npush - 1)
475 			(void) printf(" ");
476 
477 	}
478 
479 	(void) printf("\n");
480 	return (0);
481 }
482 
483 /*
484  * is_white_space():
485  *	Return 1 if buffer is all white space.
486  *	Return 0 otherwise.
487  */
488 static int
489 is_white_space(char *bufp)
490 {
491 	while (*bufp) {
492 		if (!isspace(*bufp))
493 			return (0);
494 		bufp++;
495 	}
496 	return (1);
497 }
498 
499 /*
500  * parse_line():
501  *	Parse input line from file and report any errors found.  Fill
502  *	strapush structure along the way.  Returns 1 if the line has
503  *	errors and 0 if the line is well-formed.  Another hidden
504  *	dependency on MAXAPUSH. `linep' is the input buffer, `lineno'
505  *	is the current line number, and `namep' is the filename.
506  */
507 static int
508 parse_line(char *linep, int lineno, char *namep, struct strapush *pushp)
509 {
510 	char		*wp;		/* word pointer */
511 	char		*cp;		/* character pointer */
512 	int		midx;		/* module index */
513 	int		npush;		/* number of modules to push */
514 	char		c;
515 	major_t		major_num;
516 
517 	pushp->sap_anchor = 0;		/* by default, no anchor */
518 
519 	/*
520 	 * Find the major device number.
521 	 */
522 	for (wp = linep; isspace(*wp); wp++)
523 		;
524 	for (cp = wp; !isspace(*cp); cp++)
525 		;
526 	if (!isspace(*cp)) {
527 		(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
528 		return (1);
529 	}
530 	c = *cp;
531 	*cp = '\0';
532 	if (modctl(MODGETMAJBIND, wp, strlen(wp) + 1, &major_num) != 0) {
533 		(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
534 		return (1);
535 	}
536 	*cp = c;
537 	pushp->sap_major = major_num;
538 
539 	/*
540 	 * Find the minor device number.  Must handle negative values here.
541 	 */
542 	for (wp = cp; isspace(*wp); wp++)
543 		;
544 	for (cp = wp; (isdigit(*cp) || (*cp == MINUS)); cp++)
545 		;
546 	if (!isspace(*cp)) {
547 		(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
548 		return (1);
549 	}
550 	pushp->sap_minor = (minor_t)atol(wp);
551 
552 	/*
553 	 * Find the lastminor.
554 	 */
555 	for (wp = cp; isspace(*wp); wp++)
556 		;
557 	for (cp = wp; isdigit(*cp); cp++)
558 		;
559 	if (!isspace(*cp)) {
560 		(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
561 		return (1);
562 	}
563 	pushp->sap_lastminor = (minor_t)atol(wp);
564 
565 	/*
566 	 * Read the list of module names.
567 	 */
568 	npush = 0;
569 	while ((npush < MAXAPUSH) && (*cp)) {
570 
571 		while (isspace(*cp))
572 			cp++;
573 
574 		if (strncasecmp(cp, AP_ANCHOR, sizeof (AP_ANCHOR) - 1) == 0) {
575 			if (pushp->sap_anchor != 0) {
576 				(void) fprintf(stderr,
577 				    gettext("%s: ERROR: File %s: more than "
578 				    "one anchor in line, line %d ignored\n"),
579 				    Cmdp, namep, lineno);
580 				return (1);
581 			}
582 			if (npush == 0)
583 				(void) fprintf(stderr,
584 				    gettext("%s: WARNING: File %s: anchor at "
585 				    "beginning of stream on line %d ignored\n"),
586 				    Cmdp, namep, lineno);
587 			pushp->sap_anchor = npush;
588 			cp += sizeof (AP_ANCHOR) - 1;
589 			continue;
590 		}
591 
592 		for (midx = 0; !isspace(*cp) && *cp; midx++) {
593 			if (midx == FMNAMESZ) {
594 				(void) fprintf(stderr, gettext("%s: ERROR: "
595 				    "File %s: module name too long, line %d "
596 				    "ignored\n"), Cmdp, namep, lineno);
597 				return (1);
598 			}
599 			pushp->sap_list[npush][midx] = *cp++;
600 		}
601 
602 		if (midx > 0) {
603 			pushp->sap_list[npush][midx] = '\0';
604 			npush++;
605 		}
606 	}
607 	pushp->sap_npush = npush;
608 
609 	/*
610 	 * We have everything we want from the line.
611 	 * Now make sure there is no extra garbage on the line.
612 	 */
613 	while (isspace(*cp))
614 		cp++;
615 	if (*cp) {
616 		(void) fprintf(stderr,
617 		    gettext("%s: ERROR: File %s: too many modules, line %d "
618 		    "ignored\n"), Cmdp, namep, lineno);
619 		return (1);
620 	}
621 	return (0);
622 }
623