1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# ident "%Z%%M% %I% %E% SMI" 27# 28 29# 30# Makefile.master, global definitions for system source 31# 32ROOT= /proto 33 34# Historically, ON builds were always done with root permissions, and the 35# owner/group information was duplicated in the Makefiles and the packaging 36# data and kept in sync by manual intervention. This is no longer true. 37# The only source of this information is packaging. The proto area ($ROOT) 38# does not have definitive onwer/group information, and no Makefile should 39# attempt to set this. CH once toggled operations restricted to root. It 40# is now just set to `#'. 41# 42# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all 43# be stripped completely from the source base. They are kept for now until 44# on10-based projects can merge and transition away from them. 45# 46# RELEASE_BUILD should be cleared for final release builds. This is completely 47# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies. 48# 49# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls 50# identification strings. Enabling RELEASE_BUILD automatically enables 51# INTERNAL_RELEASE_BUILD. 52# 53# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that 54# can be released for export under a binary license. It is orthogonal to 55# the other *RELEASE_BUILD settings. ("#" means do an export release 56# build, "" means do a normal build.) 57# 58# CLOSED_BUILD controls whether we try to build files under 59# usr/closed. ("" means to build closed code, "#" means don't try to 60# build it.) Skipping the closed code implies doing an export release 61# build. 62# 63# STRIP_COMMENTS toggles comment section striping. Generally the same setting 64# as INTERNAL_RELEASE_BUILD. 65# 66# __GNUC toggles the building of ON components using gcc and related tools. 67# Normally set to `#', set it to `' to do gcc build. 68# 69# The declaration POUND_SIGN is always '#'. This is needed to get around the 70# make feature that '#' is always a comment delimiter, even when escaped or 71# quoted. The only way of generating this is the :sh macro mechanism. Note 72# however that in general :sh macros should be avoided in makefiles that are 73# widely included into other makefiles, as the resulting shell executions can 74# cause a noticable slowdown in build times. 75# 76POUND_SIGN:sh= echo \\043 77CH= $(POUND_SIGN) 78 79NOT_RELEASE_BUILD= 80INTERNAL_RELEASE_BUILD= $(POUND_SIGN) 81RELEASE_BUILD= $(POUND_SIGN) 82$(RELEASE_BUILD)NOT_RELEASE_BUILD= $(POUND_SIGN) 83$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD= 84PATCH_BUILD= $(POUND_SIGN) 85 86# If CLOSED_IS_PRESENT is not set, assume the closed tree is present. 87CLOSED_BUILD_1= $(CLOSED_IS_PRESENT:yes=) 88CLOSED_BUILD= $(CLOSED_BUILD_1:no=$(POUND_SIGN)) 89 90EXPORT_RELEASE_BUILD= $(POUND_SIGN) 91$(CLOSED_BUILD)EXPORT_RELEASE_BUILD= 92 93# SPARC_BLD is '#' for an Intel build. 94# INTEL_BLD is '#' for a Sparc build. 95SPARC_BLD_1= $(MACH:i386=$(POUND_SIGN)) 96SPARC_BLD= $(SPARC_BLD_1:sparc=) 97INTEL_BLD_1= $(MACH:sparc=$(POUND_SIGN)) 98INTEL_BLD= $(INTEL_BLD_1:i386=) 99 100STRIP_COMMENTS= $(INTERNAL_RELEASE_BUILD) 101 102# set __GNUC= in the environment to build 32-bit with the gcc compiler. 103# The default is to use the Sun Studio compiler for all processor types. 104__GNUC= $(POUND_SIGN) 105 106# set __GNUC64= in the environment to build 64-bit with the gcc compiler. 107# Inherit the __GNUC value by default, and if that is set to $(POUND_SIGN) 108# then this means use the Sun Studio compiler. 109__GNUC64= $(__GNUC) 110 111# set __SSNEXT= in the enviroment to build with the 'next' release of 112# the Sun Studio compiler. This will cause command line options specific 113# to the 'next' version of the Sun Studio compiler to be used. 114__SSNEXT= $(POUND_SIGN) 115 116# CLOSED is the root of the tree that contains source which isn't released 117# as open source 118CLOSED= $(SRC)/../closed 119 120# BUILD_TOOLS is the root of all tools including compilers. 121# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld. 122 123BUILD_TOOLS= /ws/onnv-tools 124ONBLD_TOOLS= $(BUILD_TOOLS)/onbld 125 126JAVA_ROOT= /usr/java 127 128SFW_ROOT= /usr/sfw 129SFWINCDIR= $(SFW_ROOT)/include 130SFWLIBDIR= $(SFW_ROOT)/lib 131SFWLIBDIR64= $(SFW_ROOT)/lib/$(MACH64) 132 133RPCGEN= /usr/bin/rpcgen 134STABS= $(ONBLD_TOOLS)/bin/$(MACH)/stabs 135ELFEXTRACT= $(ONBLD_TOOLS)/bin/$(MACH)/elfextract 136MBH_PATCH= $(ONBLD_TOOLS)/bin/$(MACH)/mbh_patch 137ECHO= echo 138INS= install 139TRUE= true 140SYMLINK= /usr/bin/ln -s 141LN= /usr/bin/ln 142CHMOD= /usr/bin/chmod 143CHOWN= $(TRUE) 144CHGRP= $(TRUE) 145MV= /usr/bin/mv -f 146RM= /usr/bin/rm -f 147CUT= /usr/bin/cut 148NM= /usr/ccs/bin/nm 149DIFF= /usr/bin/diff 150GREP= /usr/bin/grep 151EGREP= /usr/bin/egrep 152SED= /usr/bin/sed 153NAWK= /usr/bin/nawk 154CP= /usr/bin/cp -f 155MCS= /usr/ccs/bin/mcs 156CAT= /usr/bin/cat 157ELFDUMP= /usr/ccs/bin/elfdump 158M4= /usr/ccs/bin/m4 159STRIP= /usr/ccs/bin/strip 160LEX= /usr/ccs/bin/lex 161FLEX= $(SFW_ROOT)/bin/flex 162YACC= /usr/ccs/bin/yacc 163CPP= /usr/lib/cpp 164JAVAC= $(JAVA_ROOT)/bin/javac 165JAVAH= $(JAVA_ROOT)/bin/javah 166JAVADOC= $(JAVA_ROOT)/bin/javadoc 167RMIC= $(JAVA_ROOT)/bin/rmic 168JAR= $(JAVA_ROOT)/bin/jar 169CTFCONVERT= $(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert 170CTFMERGE= $(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge 171CTFSTABS= $(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs 172NDRGEN= $(ONBLD_TOOLS)/bin/$(MACH)/ndrgen 173GENOFFSETS= $(ONBLD_TOOLS)/bin/genoffsets 174CTFCVTPTBL= $(ONBLD_TOOLS)/bin/ctfcvtptbl 175CTFFINDMOD= $(ONBLD_TOOLS)/bin/ctffindmod 176XREF= $(ONBLD_TOOLS)/bin/xref 177FIND= /usr/bin/find 178PERL= /usr/bin/perl 179SORT= /usr/bin/sort 180TOUCH= /usr/bin/touch 181WC= /usr/bin/wc 182XARGS= /usr/bin/xargs 183ELFEDIT= /usr/bin/elfedit 184ELFSIGN= /usr/bin/elfsign 185DTRACE= /usr/sbin/dtrace 186CHECK_FNAMES= $(ONBLD_TOOLS)/bin/check_fnames 187 188# Due to 6367203, objects built with gcc will fail the namespace checks. 189# Remove this override once the compiler bug is fixed. 190$(__GNUC)CHECK_FNAMES= $(TRUE) 191 192FILEMODE= 644 193DIRMODE= 755 194 195# Note: owner and group for proto area objects is no longer set by 196# Makefiles at all. These have no real effect and are kept here for 197# transition purposes. They (along with CH, CHOWN, and CHGRP) should be 198# removed early in the s11 development cycle. 199OWNER= root 200GROUP= bin 201 202# 203# The version of the patch makeup table optimized for build-time use. Used 204# during patch builds only. 205$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo 206 207# Declare that nothing should be built in parallel. 208# Individual Makefiles can use the .PARALLEL target to declare otherwise. 209.NO_PARALLEL: 210 211# For stylistic checks 212# 213# Note that the X and C checks are not used at this time and may need 214# modification when they are actually used. 215# 216CSTYLE= cstyle 217CSTYLE_TAIL= 218HDRCHK= hdrchk 219HDRCHK_TAIL= 220JSTYLE= jstyle 221 222DOT_H_CHECK= \ 223 @$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \ 224 $(HDRCHK) $< $(HDRCHK_TAIL) 225 226DOT_X_CHECK= \ 227 @$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \ 228 $(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL) 229 230DOT_C_CHECK= \ 231 @$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL) 232 233MANIFEST_CHECK= \ 234 @$(ECHO) "checking $<"; \ 235 SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \ 236 $(SRC)/cmd/svc/svccfg/svccfg-native validate $< 237 238INS.file= $(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $< 239INS.dir= $(INS) -s -d -m $(DIRMODE) $@ 240# installs and renames at once 241# 242INS.rename= $(INS.file); $(MV) $(@D)/$(<F) $@ 243 244# install a link 245INSLINKTARGET= $< 246INS.link= $(RM) $@; $(LN) $(INSLINKTARGET) $@ 247 248# MACH must be set in the shell environment per uname -p on the build host 249# More specific architecture variables should be set in lower makefiles. 250# 251# MACH64 is derived from MACH, and BUILD64 is set to `#' for 252# architectures on which we do not build 64-bit versions. 253# (There are no such architectures at the moment.) 254# 255# Set BUILD64=# in the environment to disable 64-bit amd64 256# builds on i386 machines. 257 258MACH64_1= $(MACH:sparc=sparcv9) 259MACH64= $(MACH64_1:i386=amd64) 260 261MACH32_1= $(MACH:sparc=sparcv7) 262MACH32= $(MACH32_1:i386=i86) 263 264sparc_BUILD64= 265i386_BUILD64= 266BUILD64= $($(MACH)_BUILD64) 267 268# 269# C compiler mode. Future compilers may change the default on us, 270# so force extended ANSI mode globally. Lower level makefiles can 271# override this by setting CCMODE. 272# 273CCMODE= -Xa 274CCMODE64= -Xa 275 276# 277# C compiler verbose mode. This is so we can enable it globally, 278# but turn it off in the lower level makefiles of things we cannot 279# (or aren't going to) fix. 280# 281CCVERBOSE= -v 282 283# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings 284# from the compiler about places the -xarch=v9 may differ from -xarch=v9c. 285V9ABIWARN= 286 287# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register 288# symbols (used to detect conflicts between objects that use global registers) 289# we disable this now for safety, and because genunix doesn't link with 290# this feature (the v9 default) enabled. 291# 292# REGSYM is separate since the C++ driver syntax is different. 293CCREGSYM= -Wc,-Qiselect-regsym=0 294CCCREGSYM= -Qoption cg -Qiselect-regsym=0 295 296# Prevent the removal of static symbols by the SPARC code generator (cg). 297# The x86 code generator (ube) does not remove such symbols and as such 298# using this workaround is not applicable for x86. 299# 300CCSTATICSYM= -Wc,-Qassembler-ounrefsym=0 301# 302# generate 32-bit addresses in the v9 kernel. Saves memory. 303CCABS32= -Wc,-xcode=abs32 304 305# One optimization the compiler might perform is to turn this: 306# #pragma weak foo 307# extern int foo; 308# if (&foo) 309# foo = 5; 310# into 311# foo = 5; 312# Since we do some of this (foo might be referenced in common kernel code 313# but provided only for some cpu modules or platforms), we disable this 314# optimization. 315# 316sparc_CCUNBOUND = -Wd,-xsafe=unboundsym 317i386_CCUNBOUND = 318CCUNBOUND = $($(MACH)_CCUNBOUND) 319 320# 321# compiler '-xarch' flag. This is here to centralize it and make it 322# overridable for testing. 323sparc_XARCH= -xarch=v8 324sparcv9_XARCH= -xarch=v9 325i386_XARCH= 326amd64_XARCH= -xarch=amd64 -Ui386 -U__i386 327 328# assembler '-xarch' flag. Different from compiler '-xarch' flag. 329sparc_AS_XARCH= -xarch=v8plus 330sparcv9_AS_XARCH= -xarch=v9 331i386_AS_XARCH= 332amd64_AS_XARCH= -xarch=amd64 -P -Ui386 -U__i386 333 334# 335# These flags define what we need to be 'standalone' i.e. -not- part 336# of the rather more cosy userland environment. This basically means 337# the kernel. 338# 339# XX64 future versions of gcc will make -mcmodel=kernel imply -mno-red-zone 340# 341sparc_STAND_FLAGS= -_gcc=-ffreestanding 342sparcv9_STAND_FLAGS= -_gcc=-ffreestanding 343i386_STAND_FLAGS= -_gcc=-ffreestanding 344amd64_STAND_FLAGS= -Wu,-xmodel=kernel 345$(__SSNEXT)amd64_STAND_FLAGS= -xmodel=kernel 346 347SAVEARGS= -Wu,-save_args 348amd64_STAND_FLAGS += $(SAVEARGS) 349 350STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS) 351STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS) 352 353# 354# disable the incremental linker 355ILDOFF= -xildoff 356# 357XDEPEND= -xdepend 358XFFLAG= -xF=%all 359XESS= -xs 360XSTRCONST= -xstrconst 361 362# 363# turn warnings into errors (C) 364CERRWARN = -errtags=yes -errwarn=%all 365CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT 366CERRWARN += -erroff=E_STATEMENT_NOT_REACHED 367 368# 369# turn warnings into errors (C++) 370CCERRWARN= -xwe 371 372# C99 mode 373C99_ENABLE= -xc99=%all 374C99_DISABLE= -xc99=%none 375C99MODE= $(C99_DISABLE) 376C99LMODE= $(C99MODE:-xc99%=-Xc99%) 377 378# In most places, assignments to these macros should be appended with += 379# (CPPFLAGS.master allows values to be prepended to CPPFLAGS). 380sparc_CFLAGS= $(sparc_XARCH) $(CCSTATICSYM) 381sparcv9_CFLAGS= $(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM) \ 382 $(CCSTATICSYM) 383i386_CFLAGS= $(i386_XARCH) 384amd64_CFLAGS= $(amd64_XARCH) 385 386sparc_ASFLAGS= $(sparc_AS_XARCH) 387sparcv9_ASFLAGS=$(sparcv9_AS_XARCH) 388i386_ASFLAGS= $(i386_AS_XARCH) 389amd64_ASFLAGS= $(amd64_AS_XARCH) 390 391# 392sparc_COPTFLAG= -xO3 393sparcv9_COPTFLAG= -xO3 394i386_COPTFLAG= -O 395amd64_COPTFLAG= -xO3 396 397COPTFLAG= $($(MACH)_COPTFLAG) 398COPTFLAG64= $($(MACH64)_COPTFLAG) 399 400# When -g is used, the compiler globalizes static objects 401# (gives them a unique prefix). Disable that. 402CNOGLOBAL= -W0,-noglobal 403 404# Direct the Sun Studio compiler to use a static globalization prefix based on the 405# name of the module rather than something unique. Otherwise, objects 406# will not build deterministically, as subsequent compilations of identical 407# source will yeild objects that always look different. 408# 409# In the same spirit, this will also remove the date from the N_OPT stab. 410CGLOBALSTATIC= -W0,-xglobalstatic 411 412# Normally, gcc uses indirect DWARF strings to save space. However, 413# this causes relocations that ctfconvert cannot handle. Disable this. 414CDWARFSTR= -_gcc=-fno-dwarf2-indirect-strings 415 416# Sometimes we want all symbols and types in debugging information even 417# if they aren't used. 418CALLSYMS= -W0,-xdbggen=no%usedonly 419 420# 421# Default debug format for Sun Studio 11 is dwarf, so force it to 422# generate stabs. 423# 424DEBUGFORMAT= -xdebugformat=stabs 425 426# 427# Flags used to build in debug mode for ctf generation. Bugs in the Devpro 428# compilers currently prevent us from building with cc-emitted DWARF. 429# 430CTF_FLAGS_sparc = -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR) 431CTF_FLAGS_i386 = -g $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR) 432CTF_FLAGS = $(CTF_FLAGS_$(MACH)) $(DEBUGFORMAT) 433 434# 435# Flags used with genoffsets 436# 437GOFLAGS = -_noecho \ 438 $(CALLSYMS) \ 439 $(CDWARFSTR) 440 441OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \ 442 $(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS) 443 444OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \ 445 $(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS) 446 447# 448# tradeoff time for space (smaller is better) 449# 450sparc_SPACEFLAG = -xspace -W0,-Lt 451sparcv9_SPACEFLAG = -xspace -W0,-Lt 452i386_SPACEFLAG = -xspace 453amd64_SPACEFLAG = 454 455SPACEFLAG = $($(MACH)_SPACEFLAG) 456SPACEFLAG64 = $($(MACH64)_SPACEFLAG) 457 458# 459# The Sun Studio 11 compiler has changed the behaviour of integer 460# wrap arounds and so a flag is needed to use the legacy behaviour 461# (without this flag panics/hangs could be exposed within the source). 462# 463sparc_IROPTFLAG = -W2,-xwrap_int 464sparcv9_IROPTFLAG = -W2,-xwrap_int 465i386_IROPTFLAG = 466amd64_IROPTFLAG = 467 468IROPTFLAG = $($(MACH)_IROPTFLAG) 469IROPTFLAG64 = $($(MACH64)_IROPTFLAG) 470 471sparc_XREGSFLAG = -xregs=no%appl 472sparcv9_XREGSFLAG = -xregs=no%appl 473i386_XREGSFLAG = 474amd64_XREGSFLAG = 475 476XREGSFLAG = $($(MACH)_XREGSFLAG) 477XREGSFLAG64 = $($(MACH64)_XREGSFLAG) 478 479CFLAGS= $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \ 480 $(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) $(IROPTFLAG) \ 481 $(CGLOBALSTATIC) 482CFLAGS64= $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \ 483 $(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) $(IROPTFLAG64) \ 484 $(CGLOBALSTATIC) 485# 486# Flags that are used to build parts of the code that are subsequently 487# run on the build machine (also known as the NATIVE_BUILD). 488# 489NATIVE_CFLAGS= $(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \ 490 $(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND) \ 491 $(IROPTFLAG) $(CGLOBALSTATIC) 492 493DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\" # For messaging. 494DTS_ERRNO=-D_TS_ERRNO 495CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \ 496 $(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4) 497CPPFLAGS= $(CPPFLAGS.master) 498AS_CPPFLAGS= $(CPPFLAGS.master) 499JAVAFLAGS= -deprecation 500 501# 502# For source message catalogue 503# 504.SUFFIXES: $(SUFFIXES) .i .po 505MSGROOT= $(ROOT)/catalog 506MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN) 507MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE) 508DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN) 509DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po) 510 511CLOBBERFILES += $(POFILE) $(POFILES) 512COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS) 513XGETTEXT= /usr/bin/xgettext 514XGETFLAGS= -c TRANSLATION_NOTE 515BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\ 516 $(RM) $@ ;\ 517 sed "/^domain/d" < $(<F).po > $@ ;\ 518 $(RM) $(<F).po $<.i 519# 520# This is overwritten by local Makefile when PROG is a list. 521# 522POFILE= $(PROG).po 523 524sparc_CCFLAGS= -cg92 -compat=4 \ 525 -Qoption ccfe -messages=no%anachronism \ 526 $(CCERRWARN) 527sparcv9_CCFLAGS= $(sparcv9_XARCH) -dalign -compat=5 \ 528 -Qoption ccfe -messages=no%anachronism \ 529 -Qoption ccfe -features=no%conststrings \ 530 $(CCCREGSYM) \ 531 $(CCERRWARN) 532i386_CCFLAGS= -compat=4 \ 533 -Qoption ccfe -messages=no%anachronism \ 534 -Qoption ccfe -features=no%conststrings \ 535 $(CCERRWARN) 536amd64_CCFLAGS= $(amd64_XARCH) -compat=5 \ 537 -Qoption ccfe -messages=no%anachronism \ 538 -Qoption ccfe -features=no%conststrings \ 539 $(CCERRWARN) 540 541sparc_CCOPTFLAG= -O 542sparcv9_CCOPTFLAG= -O 543i386_CCOPTFLAG= -O 544amd64_CCOPTFLAG= -O 545 546CCOPTFLAG= $($(MACH)_CCOPTFLAG) 547CCOPTFLAG64= $($(MACH64)_CCOPTFLAG) 548CCFLAGS= $(CCOPTFLAG) $($(MACH)_CCFLAGS) 549CCFLAGS64= $(CCOPTFLAG64) $($(MACH64)_CCFLAGS) 550 551# 552# Various mapfiles that are used throughout the build, and delivered to 553# /usr/lib/ld. 554# 555MAPFILE.NED_i386 = $(SRC)/common/mapfiles/i386/map.noexdata 556MAPFILE.NED_sparc = 557MAPFILE.NED = $(MAPFILE.NED_$(MACH)) 558MAPFILE.PGA = $(SRC)/common/mapfiles/$(MACH)/map.pagealign 559MAPFILE.NES = $(SRC)/common/mapfiles/common/map.noexstk 560MAPFILE.FLT = $(SRC)/common/mapfiles/common/map.filter 561MAPFILE.LEX = $(SRC)/common/mapfiles/common/map.lex.yy 562 563# 564# Generated mapfiles that are compiler specific, and used throughout the 565# build. These mapfiles are not delivered in /usr/lib/ld. 566# 567MAPFILE.NGB_sparc= $(SRC)/common/mapfiles/gen/sparc_cc_map.noexeglobs 568$(__GNUC64)MAPFILE.NGB_sparc= \ 569 $(SRC)/common/mapfiles/gen/sparc_gcc_map.noexeglobs 570MAPFILE.NGB_sparcv9= $(SRC)/common/mapfiles/gen/sparcv9_cc_map.noexeglobs 571$(__GNUC64)MAPFILE.NGB_sparcv9= \ 572 $(SRC)/common/mapfiles/gen/sparcv9_gcc_map.noexeglobs 573MAPFILE.NGB_i386= $(SRC)/common/mapfiles/gen/i386_cc_map.noexeglobs 574$(__GNUC64)MAPFILE.NGB_i386= \ 575 $(SRC)/common/mapfiles/gen/i386_gcc_map.noexeglobs 576MAPFILE.NGB_amd64= $(SRC)/common/mapfiles/gen/amd64_cc_map.noexeglobs 577$(__GNUC64)MAPFILE.NGB_amd64= \ 578 $(SRC)/common/mapfiles/gen/amd64_gcc_map.noexeglobs 579MAPFILE.NGB = $(MAPFILE.NGB_$(MACH)) 580 581# 582# A generic interface mapfile name, used by various dynamic objects to define 583# the interfaces and interposers the object must export. 584# 585MAPFILE.INT = mapfile-intf 586 587# 588# LDLIBS32 can be set in the environment to override the following assignment. 589# LDLIBS64 can be set to override the assignment made in Makefile.master.64. 590# These environment settings make sure that no libraries are searched outside 591# of the local workspace proto area: 592# LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib 593# LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64 594# 595LDLIBS32 = $(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3) 596LDLIBS.cmd = $(LDLIBS32) 597LDLIBS.lib = $(LDLIBS32) 598# 599# Define compilation macros. 600# 601COMPILE.c= $(CC) $(CFLAGS) $(CPPFLAGS) -c 602COMPILE64.c= $(CC) $(CFLAGS64) $(CPPFLAGS) -c 603COMPILE.cc= $(CCC) $(CCFLAGS) $(CPPFLAGS) -c 604COMPILE64.cc= $(CCC) $(CCFLAGS64) $(CPPFLAGS) -c 605COMPILE.s= $(AS) $(ASFLAGS) $(AS_CPPFLAGS) 606COMPILE64.s= $(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS) 607COMPILE.d= $(DTRACE) -G -32 608COMPILE64.d= $(DTRACE) -G -64 609 610CLASSPATH= . 611COMPILE.java= $(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH) 612 613# 614# Link time macros 615# 616CCNEEDED = -lC 617$(__GNUC)CCNEEDED = -L$(SFWLIBDIR) -R$(SFWLIBDIR) -lstdc++ -lgcc_s 618 619LINK.c= $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) 620LINK64.c= $(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS) 621NORUNPATH= -norunpath -nolib 622LINK.cc= $(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \ 623 $(LDFLAGS) $(CCNEEDED) 624LINK64.cc= $(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \ 625 $(LDFLAGS) $(CCNEEDED) 626 627# 628# lint macros 629# 630# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once 631# ON is built with a version of lint that has the fix for 4484186. 632# 633ALWAYS_LINT_DEFS = -errtags=yes -s 634ALWAYS_LINT_DEFS += -erroff=E_PTRDIFF_OVERFLOW 635ALWAYS_LINT_DEFS += -erroff=E_ASSIGN_NARROW_CONV 636ALWAYS_LINT_DEFS += -U__PRAGMA_REDEFINE_EXTNAME 637ALWAYS_LINT_DEFS += $(C99LMODE) 638ALWAYS_LINT_DEFS += -errsecurity=$(SECLEVEL) 639ALWAYS_LINT_DEFS += -erroff=E_SEC_CREAT_WITHOUT_EXCL 640ALWAYS_LINT_DEFS += -erroff=E_SEC_FORBIDDEN_WARN_CREAT 641# XX64 -- really only needed for amd64 lint 642ALWAYS_LINT_DEFS += -erroff=E_ASSIGN_INT_TO_SMALL_INT 643ALWAYS_LINT_DEFS += -erroff=E_CAST_INT_CONST_TO_SMALL_INT 644ALWAYS_LINT_DEFS += -erroff=E_CAST_INT_TO_SMALL_INT 645ALWAYS_LINT_DEFS += -erroff=E_CAST_TO_PTR_FROM_INT 646ALWAYS_LINT_DEFS += -erroff=E_COMP_INT_WITH_LARGE_INT 647ALWAYS_LINT_DEFS += -erroff=E_INTEGRAL_CONST_EXP_EXPECTED 648ALWAYS_LINT_DEFS += -erroff=E_PASS_INT_TO_SMALL_INT 649ALWAYS_LINT_DEFS += -erroff=E_PTR_CONV_LOSES_BITS 650 651SECLEVEL= core 652LINT.c= $(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS) 653LINT64.c= $(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS) 654LINT.s= $(LINT.c) 655 656# For some future builds, NATIVE_MACH and MACH might be different. 657# Therefore, NATIVE_MACH needs to be redefined in the 658# environment as `uname -p` to override this macro. 659# 660# For now at least, we cross-compile amd64 on i386 machines. 661NATIVE_MACH= $(MACH:amd64=i386) 662 663# Define native compilation macros 664# 665 666# Base directory where compilers are loaded. 667# Defined here so it can be overridden by developer. 668# 669SPRO_ROOT= $(BUILD_TOOLS)/SUNWspro 670SPRO_VROOT= $(SPRO_ROOT)/SS11 671GNU_ROOT= $(SFW_ROOT) 672 673# Specify platform compiler versions for languages 674# that we use (currently only c and c++). 675# 676sparc_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 677$(__GNUC)sparc_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 678sparc_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 679$(__GNUC)sparc_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 680sparc_CPP= /usr/ccs/lib/cpp 681sparc_AS= /usr/ccs/bin/as -xregsym=no 682sparc_LD= /usr/ccs/bin/ld 683sparc_LINT= $(SPRO_VROOT)/bin/lint 684 685sparcv9_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 686$(__GNUC64)sparcv9_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 687sparcv9_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 688$(__GNUC64)sparcv9_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 689sparcv9_CPP= /usr/ccs/lib/cpp 690sparcv9_AS= /usr/ccs/bin/as -xregsym=no 691sparcv9_LD= /usr/ccs/bin/ld 692sparcv9_LINT= $(SPRO_VROOT)/bin/lint 693 694# We compile 32-bit objects with cc by default 695i386_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 696$(__GNUC)i386_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 697i386_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 698$(__GNUC)i386_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 699i386_CPP= /usr/ccs/lib/cpp 700i386_AS= /usr/ccs/bin/as 701$(__GNUC)i386_AS= $(ONBLD_TOOLS)/bin/$(MACH)/aw 702i386_LD= /usr/ccs/bin/ld 703i386_LINT= $(SPRO_VROOT)/bin/lint 704 705# We compile 64-bit objects with gcc 706amd64_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 707$(__GNUC64)amd64_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 708amd64_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 709$(__GNUC64)amd64_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 710amd64_CPP= /usr/ccs/lib/cpp 711amd64_AS= $(ONBLD_TOOLS)/bin/$(MACH)/aw 712amd64_LD= /usr/ccs/bin/ld 713amd64_LINT= $(SPRO_VROOT)/bin/lint 714 715NATIVECC= $($(NATIVE_MACH)_CC) 716NATIVECCC= $($(NATIVE_MACH)_CCC) 717NATIVECPP= $($(NATIVE_MACH)_CPP) 718NATIVEAS= $($(NATIVE_MACH)_AS) 719NATIVELD= $($(NATIVE_MACH)_LD) 720NATIVELINT= $($(NATIVE_MACH)_LINT) 721 722# 723# Makefile.master.64 overrides these settings 724# 725CC= $(NATIVECC) 726CCC= $(NATIVECCC) 727CPP= $(NATIVECPP) 728AS= $(NATIVEAS) 729LD= $(NATIVELD) 730LINT= $(NATIVELINT) 731 732# The real compilers used for this build 733CW_CC_CMD= $(CC) -_compiler 734CW_CCC_CMD= $(CCC) -_compiler 735REAL_CC= $(CW_CC_CMD:sh) 736REAL_CCC= $(CW_CCC_CMD:sh) 737 738# Pass -Y flag to cpp (method of which is release-dependent) 739CCYFLAG= -Y I, 740 741BDIRECT= -Bdirect 742BDYNAMIC= -Bdynamic 743BLOCAL= -Blocal 744BNODIRECT= -Bnodirect 745BREDUCE= -Breduce 746BSTATIC= -Bstatic 747 748ZCOMBRELOC= -zcombreloc 749ZDEFS= -zdefs 750ZDIRECT= -zdirect 751ZIGNORE= -zignore 752ZINITFIRST= -zinitfirst 753ZINTERPOSE= -zinterpose 754ZLAZYLOAD= -zlazyload 755ZLOADFLTR= -zloadfltr 756ZMULDEFS= -zmuldefs 757ZNODEFAULTLIB= -znodefaultlib 758ZNODEFS= -znodefs 759ZNODELETE= -znodelete 760ZNODLOPEN= -znodlopen 761ZNODUMP= -znodump 762ZNOLAZYLOAD= -znolazyload 763ZNORELOC= -znoreloc 764ZNOVERSION= -znoversion 765ZRECORD= -zrecord 766ZREDLOCSYM= -zredlocsym 767ZTEXT= -ztext 768ZVERBOSE= -zverbose 769 770GSHARED= -G 771CCMT= -mt 772 773# Handle different PIC models on different ISAs 774# (May be overridden by lower-level Makefiles) 775 776sparc_C_PICFLAGS = -K pic 777sparcv9_C_PICFLAGS = -K pic 778i386_C_PICFLAGS = -K pic 779amd64_C_PICFLAGS = -K pic 780C_PICFLAGS = $($(MACH)_C_PICFLAGS) 781C_PICFLAGS64 = $($(MACH64)_C_PICFLAGS) 782 783sparc_C_BIGPICFLAGS = -K PIC 784sparcv9_C_BIGPICFLAGS = -K PIC 785i386_C_BIGPICFLAGS = -K PIC 786amd64_C_BIGPICFLAGS = -K PIC 787C_BIGPICFLAGS = $($(MACH)_C_BIGPICFLAGS) 788C_BIGPICFLAGS64 = $($(MACH64)_C_BIGPICFLAGS) 789 790# CC requires there to be no space between '-K' and 'pic' or 'PIC'. 791sparc_CC_PICFLAGS = -Kpic 792sparcv9_CC_PICFLAGS = -KPIC 793i386_CC_PICFLAGS = -Kpic 794amd64_CC_PICFLAGS = -Kpic 795CC_PICFLAGS = $($(MACH)_CC_PICFLAGS) 796CC_PICFLAGS64 = $($(MACH64)_CC_PICFLAGS) 797 798AS_PICFLAGS= $(C_PICFLAGS) 799AS_BIGPICFLAGS= $(C_BIGPICFLAGS) 800 801# 802# Default label for CTF sections 803# 804CTFCVTFLAGS= -i -L VERSION 805 806# 807# Override to pass module-specific flags to ctfmerge. Currently used 808# only by krtld to turn on fuzzy matching. 809# 810CTFMRGFLAGS= 811 812CTFCONVERT_O = $(CTFCONVERT) $(CTFCVTFLAGS) $@ 813 814ELFSIGN_O= $(TRUE) 815ELFSIGN_CRYPTO= $(ELFSIGN_O) 816ELFSIGN_OBJECT= $(ELFSIGN_O) 817ELFSIGN_CRYPTO_LIMITED= $(ELFSIGN_O) 818$(EXPORT_RELEASE_BUILD)ELFSIGN_O = $(ELFSIGN) 819$(EXPORT_RELEASE_BUILD)ELFSIGN_CFNAME = SUNWosnetCF 820$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY = \ 821 $(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_CFNAME) 822$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT= \ 823 $(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_CFNAME) 824$(EXPORT_RELEASE_BUILD)ELFSIGN_CLNAME = SUNWosnetCFLimited 825$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY_LIMITED = \ 826 $(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_CLNAME) 827$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT_LIMITED= \ 828 $(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_CLNAME) 829$(EXPORT_RELEASE_BUILD)ELFSIGN_SENAME = SUNWosnetSE 830$(EXPORT_RELEASE_BUILD)ELFSIGN_SEKEY = \ 831 $(CLOSED)/cmd/cmd-crypto/etc/keys/$(ELFSIGN_SENAME) 832$(EXPORT_RELEASE_BUILD)ELFSIGN_SECERT= \ 833 $(CLOSED)/cmd/cmd-crypto/etc/certs/$(ELFSIGN_SENAME) 834$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO= $(ELFSIGN_O) sign \ 835 $(ELFSIGN_FORMAT_OPTION) \ 836 -k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@ 837$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO_LIMITED= $(ELFSIGN_O) sign \ 838 $(ELFSIGN_FORMAT_OPTION) \ 839 -k $(ELFSIGN_KEY_LIMITED) -c $(ELFSIGN_CERT_LIMITED) \ 840 -e $@ 841$(EXPORT_RELEASE_BUILD)ELFSIGN_OBJECT= $(ELFSIGN_O) sign \ 842 $(ELFSIGN_FORMAT_OPTION) \ 843 -k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@ 844 845# Rules (normally from make.rules) and macros which are used for post 846# processing files. Normally, these do stripping of the comment section 847# automatically. 848# RELEASE_CM: Should be editted to reflect the release. 849# POST_PROCESS_O: Post-processing for `.o' files. 850# POST_PROCESS_A: Post-processing for `.a' files (currently null). 851# POST_PROCESS_SO: Post-processing for `.so' files. 852# POST_PROCESS: Post-processing for executable files (no suffix). 853# Note that these macros are not completely generalized as they are to be 854# used with the file name to be processed following. 855# 856# It is left as an exercise to Release Engineering to embellish the generation 857# of the release comment string. 858# 859# If this is a standard development build: 860# compress the comment section (mcs -c) 861# add the standard comment (mcs -a $(RELEASE_CM)) 862# add the development specific comment (mcs -a $(DEV_CM)) 863# 864# If this is an installation build: 865# delete the comment section (mcs -d) 866# add the standard comment (mcs -a $(RELEASE_CM)) 867# add the development specific comment (mcs -a $(DEV_CM)) 868# 869# If this is an release build: 870# delete the comment section (mcs -d) 871# add the standard comment (mcs -a $(RELEASE_CM)) 872# 873# The ONVERS macro sets the default value for the VERSION string 874# within pkginfo. 875# 876# The following list of macros are used in the definition of RELEASE_CM 877# which is used to label all binaries in the build: 878# 879# RELEASE Specific release of the build, eg: 5.2 880# RELEASE_MAJOR Major version number part of $(RELEASE) 881# RELEASE_MINOR Minor version number part of $(RELEASE) 882# VERSION Version of the build (alpha, beta, Generic) 883# PATCHID If this is a patch this value should contain 884# the patchid value (eg: "Generic 100832-01"), otherwise 885# it will be set to $(VERSION) 886# RELEASE_DATE Date of the Release Build 887# PATCH_DATE Date the patch was created, if this is blank it 888# will default to the RELEASE_DATE 889# 890ONVERS= "11.11" 891RELEASE_MAJOR= 5 892RELEASE_MINOR= 11 893RELEASE= $(RELEASE_MAJOR).$(RELEASE_MINOR) 894VERSION= SunOS Development 895PATCHID= $(VERSION) 896RELEASE_DATE= October 2007 897PATCH_DATE= $(RELEASE_DATE) 898RELEASE_CM= "@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)" 899DEV_CM= "@($(POUND_SIGN))SunOS Internal Development: \ 900`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`" 901 902PROCESS_COMMENT= @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM) 903$(STRIP_COMMENTS)PROCESS_COMMENT= @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM) 904$(RELEASE_BUILD)PROCESS_COMMENT= @?${MCS} -d -a $(RELEASE_CM) 905 906STRIP_STABS= : 907$(RELEASE_BUILD)STRIP_STABS= $(STRIP) -x $@ 908 909POST_PROCESS_O= $(PROCESS_COMMENT) $@ 910POST_PROCESS_A= 911POST_PROCESS_SO= $(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \ 912 $(ELFSIGN_OBJECT) 913POST_PROCESS= $(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \ 914 $(ELFSIGN_OBJECT) 915 916# 917# The PKGDEFS macro points to the source directory containing the majority 918# of ON's package definitions plus Makefiles with general package creation 919# rules. 920# 921# PKGARCHIVE specifies the default location where packages should be 922# placed if built. 923# 924PKGDEFS=$(SRC)/pkgdefs 925$(RELEASE_BUILD)PKGARCHIVESUFFIX= -nd 926PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX) 927 928# Default build rules which perform comment section post-processing. 929# 930.c: 931 $(LINK.c) -o $@ $< $(LDLIBS) 932 $(POST_PROCESS) 933.c.o: 934 $(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK) 935 $(POST_PROCESS_O) 936.c.a: 937 $(COMPILE.c) -o $% $< 938 $(PROCESS_COMMENT) $% 939 $(AR) $(ARFLAGS) $@ $% 940 $(RM) $% 941.s.o: 942 $(COMPILE.s) -o $@ $< 943 $(POST_PROCESS_O) 944.s.a: 945 $(COMPILE.s) -o $% $< 946 $(PROCESS_COMMENT) $% 947 $(AR) $(ARFLAGS) $@ $% 948 $(RM) $% 949.cc: 950 $(LINK.cc) -o $@ $< $(LDLIBS) 951 $(POST_PROCESS) 952.cc.o: 953 $(COMPILE.cc) $(OUTPUT_OPTION) $< 954 $(POST_PROCESS_O) 955.cc.a: 956 $(COMPILE.cc) -o $% $< 957 $(AR) $(ARFLAGS) $@ $% 958 $(PROCESS_COMMENT) $% 959 $(RM) $% 960.y: 961 $(YACC.y) $< 962 $(LINK.c) -o $@ y.tab.c $(LDLIBS) 963 $(POST_PROCESS) 964 $(RM) y.tab.c 965.y.o: 966 $(YACC.y) $< 967 $(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK) 968 $(POST_PROCESS_O) 969 $(RM) y.tab.c 970.l: 971 $(RM) $*.c 972 $(LEX.l) $< > $*.c 973 $(LINK.c) -o $@ $*.c -ll $(LDLIBS) 974 $(POST_PROCESS) 975 $(RM) $*.c 976.l.o: 977 $(RM) $*.c 978 $(LEX.l) $< > $*.c 979 $(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK) 980 $(POST_PROCESS_O) 981 $(RM) $*.c 982 983.java.class: 984 $(COMPILE.java) $< 985 986# 987# Rules to create message catalogue files from .sh, .ksh, .c, .y, and .l 988# files. For .sh and .ksh files, we extract all gettext strings with 989# sed(1) (being careful to permit multiple gettext strings on the same 990# line), weed out the dups, and build the catalogue with awk(1). 991# 992 993.sh.po: 994 $(SED) -n -e ":a" \ 995 -e "h" \ 996 -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p" \ 997 -e "x" \ 998 -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/" \ 999 -e "t a" \ 1000 $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@ 1001 1002.ksh.po: 1003 $(SED) -n -e ":a" \ 1004 -e "h" \ 1005 -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p" \ 1006 -e "x" \ 1007 -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/" \ 1008 -e "t a" \ 1009 $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@ 1010 1011# 1012# When using xgettext, we want messages to go to the default domain, 1013# rather than the specified one. This special version of the 1014# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN, 1015# causing xgettext to put all messages into the default domain. 1016# 1017CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN) 1018 1019.c.i: 1020 $(CPPFORPO) $< > $@ 1021 1022.h.i: 1023 $(CPPFORPO) $< > $@ 1024 1025.y.i: 1026 $(YACC) -d $< 1027 $(CPPFORPO) y.tab.c > $@ 1028 $(RM) y.tab.c 1029 1030.l.i: 1031 $(LEX) $< 1032 $(CPPFORPO) lex.yy.c > $@ 1033 $(RM) lex.yy.c 1034 1035.c.po: 1036 $(CPPFORPO) $< > $<.i 1037 $(BUILD.po) 1038 1039.y.po: 1040 $(YACC) -d $< 1041 $(CPPFORPO) y.tab.c > $<.i 1042 $(BUILD.po) 1043 $(RM) y.tab.c 1044 1045.l.po: 1046 $(LEX) $< 1047 $(CPPFORPO) lex.yy.c > $<.i 1048 $(BUILD.po) 1049 $(RM) lex.yy.c 1050 1051# 1052# Rules to perform stylistic checks 1053# 1054.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk 1055 1056.h.check: 1057 $(DOT_H_CHECK) 1058 1059.x.check: 1060 $(DOT_X_CHECK) 1061 1062.xml.xmlchk: 1063 $(MANIFEST_CHECK) 1064 1065# 1066# Rules to process ONC+ Source partial files 1067# 1068%_onc_plus: % 1069 @$(ECHO) "extracting code from $< ... " 1070 sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $< > $@ 1071 1072# 1073# Include rules to render automated sccs get rules "safe". 1074# 1075include $(SRC)/Makefile.noget 1076