xref: /illumos-gate/usr/src/Makefile.master (revision 1a220b56b93ff1dc80855691548503117af4cc10) 
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21
22#
23# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28
29#
30# Makefile.master, global definitions for system source
31#
32ROOT=		/proto
33
34# Historically, ON builds were always done with root permissions, and the
35# owner/group information was duplicated in the Makefiles and the packaging
36# data and kept in sync by manual intervention.  This is no longer true.
37# The only source of this information is packaging.  The proto area ($ROOT)
38# does not have definitive onwer/group information, and no Makefile should
39# attempt to set this.  CH once toggled operations restricted to root.  It
40# is now just set to `#'.
41#
42# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all
43# be stripped completely from the source base.  They are kept for now until
44# on10-based projects can merge and transition away from them.
45#
46# RELEASE_BUILD should be cleared for final release builds. This is completely
47# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies.
48#
49# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls
50# identification strings. Enabling RELEASE_BUILD automatically enables
51# INTERNAL_RELEASE_BUILD.
52#
53# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that
54# can be released for export under a binary license.  It is orthogonal to
55# the other *RELEASE_BUILD settings.  ("#" means do an export release
56# build, "" means do a normal build.)
57#
58# CLOSED_BUILD controls whether we try to build files under
59# usr/closed.  ("" means to build closed code, "#" means don't try to
60# build it.)  Skipping the closed code implies doing an export release
61# build.
62#
63# STRIP_COMMENTS toggles comment section striping. Generally the same setting
64# as INTERNAL_RELEASE_BUILD.
65#
66# __GNUC toggles the building of ON components using gcc and related tools.
67# Normally set to `#', set it to `' to do gcc build.
68#
69# The declaration POUND_SIGN is always '#'. This is needed to get around the
70# make feature that '#' is always a comment delimiter, even when escaped or
71# quoted.  The only way of generating this is the :sh macro mechanism.  Note
72# however that in general :sh macros should be avoided in makefiles that are
73# widely included into other makefiles, as the resulting shell executions can
74# cause a noticable slowdown in build times.
75#
76POUND_SIGN:sh=				echo \\043
77CH=					$(POUND_SIGN)
78
79NOT_RELEASE_BUILD=
80INTERNAL_RELEASE_BUILD=			$(POUND_SIGN)
81RELEASE_BUILD=				$(POUND_SIGN)
82$(RELEASE_BUILD)NOT_RELEASE_BUILD=	$(POUND_SIGN)
83$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD=
84PATCH_BUILD=				$(POUND_SIGN)
85
86# If CLOSED_IS_PRESENT is not set, assume the closed tree is present.
87CLOSED_BUILD_1=	$(CLOSED_IS_PRESENT:yes=)
88CLOSED_BUILD=	$(CLOSED_BUILD_1:no=$(POUND_SIGN))
89
90EXPORT_RELEASE_BUILD=			$(POUND_SIGN)
91$(CLOSED_BUILD)EXPORT_RELEASE_BUILD=
92
93# SPARC_BLD is '#' for an Intel build.
94# INTEL_BLD is '#' for a Sparc build.
95SPARC_BLD_1=    $(MACH:i386=$(POUND_SIGN))
96SPARC_BLD=      $(SPARC_BLD_1:sparc=)
97INTEL_BLD_1=    $(MACH:sparc=$(POUND_SIGN))
98INTEL_BLD=      $(INTEL_BLD_1:i386=)
99
100STRIP_COMMENTS=	$(INTERNAL_RELEASE_BUILD)
101
102# set __GNUC= in the environment to build 32-bit with the gcc compiler.
103# The default is to use the Sun Studio 10 compiler for all processor types.
104__GNUC=		$(POUND_SIGN)
105
106# set __GNUC64= in the environment to build 64-bit with the gcc compiler.
107# The default is to use the Sun Studio 10 compiler by using the __GNUC
108# setting.
109__GNUC64=	$(__GNUC)
110
111# CLOSED is the root of the tree that contains source which isn't released
112# as open source
113CLOSED=		$(SRC)/../closed
114
115# BUILD_TOOLS is the root of all tools including compilers.
116# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld.
117
118BUILD_TOOLS=		/ws/onnv-tools
119ONBLD_TOOLS=		$(BUILD_TOOLS)/onbld
120
121JAVA_ROOT=	/usr/java
122
123SFW_ROOT=	/usr/sfw
124SFWINCDIR=	$(SFW_ROOT)/include
125SFWLIBDIR=	$(SFW_ROOT)/lib
126SFWLIBDIR64=	$(SFW_ROOT)/lib/$(MACH64)
127
128RPCGEN=		/usr/bin/rpcgen
129STABS=		$(ONBLD_TOOLS)/bin/$(MACH)/stabs
130ECHO=		echo
131INS=		install
132TRUE=		true
133SYMLINK=	/usr/bin/ln -s
134LN=		/usr/bin/ln
135CHMOD=		/usr/bin/chmod
136CHOWN=		$(TRUE)
137CHGRP=		$(TRUE)
138MV=		/usr/bin/mv -f
139RM=		/usr/bin/rm -f
140GREP=		/usr/bin/grep
141EGREP=		/usr/bin/egrep
142SED=		/usr/bin/sed
143NAWK=		/usr/bin/nawk
144CP=		/usr/bin/cp -f
145MCS=		/usr/ccs/bin/mcs
146CAT=            /usr/bin/cat
147M4=		/usr/ccs/bin/m4
148STRIP=		/usr/ccs/bin/strip
149LEX=		/usr/ccs/bin/lex
150YACC=		/usr/ccs/bin/yacc
151CPP=		/usr/lib/cpp
152JAVAC=		$(JAVA_ROOT)/bin/javac
153JAVAH=		$(JAVA_ROOT)/bin/javah
154JAVADOC=	$(JAVA_ROOT)/bin/javadoc
155RMIC=		$(JAVA_ROOT)/bin/rmic
156JAR=		$(JAVA_ROOT)/bin/jar
157CTFCONVERT=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert
158CTFMERGE=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge
159CTFSTABS=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs
160GENOFFSETS=	$(ONBLD_TOOLS)/bin/genoffsets
161CTFCVTPTBL=	$(ONBLD_TOOLS)/bin/ctfcvtptbl
162CTFFINDMOD=	$(ONBLD_TOOLS)/bin/ctffindmod
163XREF=		$(ONBLD_TOOLS)/bin/xref
164FIND=		/usr/bin/find
165PERL=		/usr/bin/perl
166SORT=		/usr/bin/sort
167TOUCH=		/usr/bin/touch
168WC=		/usr/bin/wc
169XARGS=		/usr/bin/xargs
170ELFSIGN=	/usr/bin/elfsign
171DTRACE=		/usr/sbin/dtrace
172CHECK_FNAMES=	$(ONBLD_TOOLS)/bin/check_fnames
173
174# Due to 6367203, objects built with gcc will fail the namespace checks.
175# Remove this override once the compiler bug is fixed.
176$(__GNUC)CHECK_FNAMES=	$(TRUE)
177
178FILEMODE=	644
179DIRMODE=	755
180
181# Note: owner and group for proto area objects is no longer set by
182# Makefiles at all.  These have no real effect and are kept here for
183# transition purposes.  They (along with CH, CHOWN, and CHGRP) should be
184# removed early in the s11 development cycle.
185OWNER=		root
186GROUP=		bin
187
188#
189# The version of the patch makeup table optimized for build-time use.  Used
190# during patch builds only.
191$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo
192
193# Declare that nothing should be built in parallel.
194# Individual Makefiles can use the .PARALLEL target to declare otherwise.
195.NO_PARALLEL:
196
197# For stylistic checks
198#
199# Note that the X and C checks are not used at this time and may need
200# modification when they are actually used.
201#
202CSTYLE=		cstyle
203CSTYLE_TAIL=
204HDRCHK=		hdrchk
205HDRCHK_TAIL=
206JSTYLE=		jstyle
207
208DOT_H_CHECK=	\
209	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \
210	$(HDRCHK) $< $(HDRCHK_TAIL)
211
212DOT_X_CHECK=	\
213	@$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \
214	$(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL)
215
216DOT_C_CHECK=	\
217	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL)
218
219MANIFEST_CHECK=	\
220	@$(ECHO) "checking $<"; \
221	SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \
222	$(SRC)/cmd/svc/svccfg/svccfg-native validate $<
223
224INS.file=	$(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $<
225INS.dir=	$(INS) -s -d -m $(DIRMODE) $@
226# installs and renames at once
227#
228INS.rename=	$(INS.file); $(MV) $(@D)/$(<F) $@
229
230# install a link
231INSLINKTARGET=	$<
232INS.link=	$(RM) $@; $(LN) $(INSLINKTARGET) $@
233
234# MACH must be set in the shell environment per uname -p on the build host
235# More specific architecture variables should be set in lower makefiles.
236#
237# MACH64 is derived from MACH, and BUILD64 is set to `#' for
238# architectures on which we do not build 64-bit versions.
239# (There are no such architectures at the moment.)
240#
241# Set BUILD64=# in the environment to disable 64-bit amd64
242# builds on i386 machines.
243
244MACH64_1=	$(MACH:sparc=sparcv9)
245MACH64=		$(MACH64_1:i386=amd64)
246
247MACH32_1=	$(MACH:sparc=sparcv7)
248MACH32=		$(MACH32_1:i386=i86)
249
250sparc_BUILD64=
251i386_BUILD64=
252BUILD64=	$($(MACH)_BUILD64)
253
254#
255# C compiler mode. Future compilers may change the default on us,
256# so force extended ANSI mode globally. Lower level makefiles can
257# override this by setting CCMODE.
258#
259CCMODE=			-Xa
260CCMODE64=		-Xa
261
262#
263# C compiler verbose mode. This is so we can enable it globally,
264# but turn it off in the lower level makefiles of things we cannot
265# (or aren't going to) fix.
266#
267CCVERBOSE=		-v
268
269# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings
270# from the compiler about places the -xarch=v9 may differ from -xarch=v9c.
271V9ABIWARN=
272
273# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register
274# symbols (used to detect conflicts between objects that use global registers)
275# we disable this now for safety, and because genunix doesn't link with
276# this feature (the v9 default) enabled.
277#
278# REGSYM is separate since the C++ driver syntax is different.
279CCREGSYM=		-Wc,-Qiselect-regsym=0
280CCCREGSYM=		-Qoption cg -Qiselect-regsym=0
281
282#
283# generate 32-bit addresses in the v9 kernel. Saves memory.
284CCABS32=		-Wc,-xcode=abs32
285
286# One optimization the compiler might perform is to turn this:
287#	#pragma weak foo
288#	extern int foo;
289#	if (&foo)
290#		foo = 5;
291# into
292#	foo = 5;
293# Since we do some of this (foo might be referenced in common kernel code
294# but provided only for some cpu modules or platforms), we disable this
295# optimization.
296#
297sparc_CCUNBOUND	= -Wd,-xsafe=unboundsym
298i386_CCUNBOUND	=
299CCUNBOUND	= $($(MACH)_CCUNBOUND)
300
301#
302# compiler '-xarch' flag. This is here to centralize it and make it
303# overridable for testing.
304sparc_XARCH=		-xarch=v8
305sparcv9_XARCH=		-xarch=v9
306i386_XARCH=
307amd64_XARCH=		-xarch=amd64 -Ui386 -U__i386
308
309# assembler '-xarch' flag.  Different from compiler '-xarch' flag.
310sparc_AS_XARCH=		-xarch=v8plus
311sparcv9_AS_XARCH=	-xarch=v9
312i386_AS_XARCH=
313amd64_AS_XARCH=		-xarch=amd64 -P -Ui386 -U__i386
314
315#
316# These flags define what we need to be 'standalone' i.e. -not- part
317# of the rather more cosy userland environment.  This basically means
318# the kernel.
319#
320# XX64	future versions of gcc will make -mcmodel=kernel imply -mno-red-zone
321#
322sparc_STAND_FLAGS=	-_gcc=-ffreestanding
323sparcv9_STAND_FLAGS=	-_gcc=-ffreestanding
324i386_STAND_FLAGS=	-_gcc=-ffreestanding
325amd64_STAND_FLAGS=	-Wu,-xmodel=kernel
326
327SAVEARGS=		-Wu,-save_args
328amd64_STAND_FLAGS	+= $(SAVEARGS)
329
330STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS)
331STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS)
332
333#
334# disable the incremental linker
335ILDOFF=			-xildoff
336#
337XDEPEND=		-xdepend
338XFFLAG=			-xF
339XESS=			-xs
340XSTRCONST=		-xstrconst
341
342#
343# turn warnings into errors (C)
344CERRWARN = -errtags=yes -errwarn=%all
345CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT
346CERRWARN += -erroff=E_STATEMENT_NOT_REACHED
347
348#
349# turn warnings into errors (C++)
350CCERRWARN=		-xwe
351
352# C99 mode
353C99_ENABLE=	-xc99=%all
354C99_DISABLE=	-xc99=%none
355C99MODE=	$(C99_DISABLE)
356C99LMODE=	$(C99MODE:-xc99%=-Xc99%)
357
358# In most places, assignments to these macros should be appended with +=
359# (CPPFLAGS.master allows values to be prepended to CPPFLAGS).
360sparc_CFLAGS=	$(sparc_XARCH)
361sparcv9_CFLAGS=	$(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM)
362i386_CFLAGS=	$(i386_XARCH)
363amd64_CFLAGS=	$(amd64_XARCH)
364
365sparc_ASFLAGS=	$(sparc_AS_XARCH)
366sparcv9_ASFLAGS=$(sparcv9_AS_XARCH)
367i386_ASFLAGS=	$(i386_AS_XARCH)
368amd64_ASFLAGS=	$(amd64_AS_XARCH)
369
370#
371sparc_COPTFLAG=		-xO3
372sparcv9_COPTFLAG=	-xO3
373i386_COPTFLAG=		-O
374amd64_COPTFLAG=		-xO3
375
376COPTFLAG= $($(MACH)_COPTFLAG)
377COPTFLAG64= $($(MACH64)_COPTFLAG)
378
379# When -g is used, the compiler globalizes static objects
380# (gives them a unique prefix). Disable that.
381CNOGLOBAL= -W0,-noglobal
382
383# Normally, gcc uses indirect DWARF strings to save space.  However,
384# this causes relocations that ctfconvert cannot handle.  Disable this.
385CDWARFSTR=	-_gcc=-fno-dwarf2-indirect-strings
386
387# Sometimes we want all symbols and types in debugging information even
388# if they aren't used.
389CALLSYMS=	-W0,-xdbggen=no%usedonly
390
391#
392# Flags used to build in debug mode for ctf generation.  Bugs in the Devpro
393# compilers currently prevent us from building with cc-emitted DWARF.
394#
395CTF_FLAGS_sparc	= -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
396CTF_FLAGS_i386	= -g $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
397CTF_FLAGS	= $(CTF_FLAGS_$(MACH))
398
399#
400# Flags used with genoffsets
401#
402GOFLAGS = -_noecho \
403	$(CALLSYMS) \
404	$(CDWARFSTR)
405
406OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
407	$(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS)
408
409OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
410	$(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS)
411
412#
413# tradeoff time for space (smaller is better)
414#
415sparc_SPACEFLAG		= -xspace -W0,-Lt -W2,-Rcond_elim
416sparcv9_SPACEFLAG	= -xspace -W0,-Lt -W2,-Rcond_elim
417i386_SPACEFLAG		= -xspace
418amd64_SPACEFLAG		=
419
420SPACEFLAG		= $($(MACH)_SPACEFLAG)
421SPACEFLAG64		= $($(MACH64)_SPACEFLAG)
422
423sparc_XREGSFLAG		= -xregs=no%appl
424sparcv9_XREGSFLAG	= -xregs=no%appl
425i386_XREGSFLAG		=
426amd64_XREGSFLAG		=
427
428XREGSFLAG		= $($(MACH)_XREGSFLAG)
429XREGSFLAG64		= $($(MACH64)_XREGSFLAG)
430
431CFLAGS=         $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \
432		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
433CFLAGS64=       $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \
434		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
435NATIVE_CFLAGS=	$(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \
436		$(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND)
437
438DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\"	# For messaging.
439DTS_ERRNO=-D_TS_ERRNO
440CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \
441	$(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4)
442CPPFLAGS=	$(CPPFLAGS.master)
443AS_CPPFLAGS=	$(CPPFLAGS.master)
444JAVAFLAGS=	-deprecation
445
446#
447# For source message catalogue
448#
449.SUFFIXES: $(SUFFIXES) .i .po
450MSGROOT= $(ROOT)/catalog
451MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN)
452MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE)
453DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN)
454DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po)
455
456CLOBBERFILES += $(POFILE) $(POFILES)
457COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS)
458XGETTEXT= /usr/bin/xgettext
459XGETFLAGS= -c TRANSLATION_NOTE
460BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\
461	$(RM)	$@ ;\
462	sed "/^domain/d" < $(<F).po > $@ ;\
463	$(RM) $(<F).po $<.i
464#
465# This is overwritten by local Makefile when PROG is a list.
466#
467POFILE= $(PROG).po
468
469sparc_CCFLAGS=		-cg92 -compat=4 \
470			-Qoption ccfe -messages=no%anachronism \
471			$(CCERRWARN)
472sparcv9_CCFLAGS=	$(sparcv9_XARCH) -dalign -compat=5 \
473			-Qoption ccfe -messages=no%anachronism \
474			-Qoption ccfe -features=no%conststrings \
475			$(CCCREGSYM) \
476			$(CCERRWARN)
477i386_CCFLAGS=		-compat=4 \
478			-Qoption ccfe -messages=no%anachronism \
479			-Qoption ccfe -features=no%conststrings \
480			$(CCERRWARN)
481amd64_CCFLAGS=		$(amd64_XARCH) -compat=5 \
482			-Qoption ccfe -messages=no%anachronism \
483			-Qoption ccfe -features=no%conststrings \
484			$(CCERRWARN)
485
486sparc_CCOPTFLAG=	-O
487sparcv9_CCOPTFLAG=	-O
488i386_CCOPTFLAG=		-O
489amd64_CCOPTFLAG=	-O
490
491CCOPTFLAG=	$($(MACH)_CCOPTFLAG)
492CCOPTFLAG64=	$($(MACH64)_CCOPTFLAG)
493CCFLAGS=	$(CCOPTFLAG) $($(MACH)_CCFLAGS)
494CCFLAGS64=	$(CCOPTFLAG64) $($(MACH64)_CCFLAGS)
495#
496# Used by Makefile.cmd, Makefile.lib and Makefile.ucbcmd
497#
498PGA_MAPFILE =	$(SRC)/cmd/sgs/mapfiles/$(MACH)/map.pagealign
499#
500#
501# LDLIBS32 can be set in the environment to override the following assignment.
502# LDLIBS64 can be set to override the assignment made in Makefile.master.64.
503# These environment settings make sure that no libraries are searched outside
504# of the local workspace proto area:
505#	LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib
506#	LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64
507#
508LDLIBS32 =	$(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3)
509LDLIBS.cmd = 	$(LDLIBS32)
510LDLIBS.lib =	$(LDLIBS32)
511#
512# Define compilation macros.
513#
514COMPILE.c=	$(CC) $(CFLAGS) $(CPPFLAGS) -c
515COMPILE64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) -c
516COMPILE.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) -c
517COMPILE64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) -c
518COMPILE.s=	$(AS) $(ASFLAGS) $(AS_CPPFLAGS)
519COMPILE64.s=	$(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS)
520COMPILE.d=	$(DTRACE) -G -32
521COMPILE64.d=	$(DTRACE) -G -64
522
523CLASSPATH=	.
524COMPILE.java=	$(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH)
525
526#
527# Link time macros
528#
529CCNEEDED		= -lC
530$(__GNUC)CCNEEDED	= -L$(SFWLIBDIR) -R$(SFWLIBDIR) -lstdc++ -lgcc_s
531
532LINK.c=		$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
533LINK64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS)
534NORUNPATH=	-norunpath -nolib
535LINK.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \
536		$(LDFLAGS) $(CCNEEDED)
537LINK64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \
538		$(LDFLAGS) $(CCNEEDED)
539
540#
541# lint macros
542#
543# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once
544# ON is built with a version of lint that has the fix for 4484186.
545#
546ALWAYS_LINT_DEFS =	-errtags=yes -s
547ALWAYS_LINT_DEFS +=	-erroff=E_PTRDIFF_OVERFLOW
548ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_NARROW_CONV
549ALWAYS_LINT_DEFS +=	-U__PRAGMA_REDEFINE_EXTNAME
550ALWAYS_LINT_DEFS +=	$(C99LMODE)
551ALWAYS_LINT_DEFS +=	-errsecurity=$(SECLEVEL)
552ALWAYS_LINT_DEFS +=	-erroff=E_SEC_CREAT_WITHOUT_EXCL
553ALWAYS_LINT_DEFS +=	-erroff=E_SEC_FORBIDDEN_WARN_CREAT
554# XX64 -- really only needed for amd64 lint
555ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_INT_TO_SMALL_INT
556ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_CONST_TO_SMALL_INT
557ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_TO_SMALL_INT
558ALWAYS_LINT_DEFS +=	-erroff=E_CAST_TO_PTR_FROM_INT
559ALWAYS_LINT_DEFS +=	-erroff=E_COMP_INT_WITH_LARGE_INT
560ALWAYS_LINT_DEFS +=	-erroff=E_INTEGRAL_CONST_EXP_EXPECTED
561ALWAYS_LINT_DEFS +=	-erroff=E_PASS_INT_TO_SMALL_INT
562ALWAYS_LINT_DEFS +=	-erroff=E_PTR_CONV_LOSES_BITS
563
564SECLEVEL=	core
565LINT.c=		$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
566LINT64.c=	$(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
567LINT.s=		$(LINT.c)
568
569# For some future builds, NATIVE_MACH and MACH might be different.
570# Therefore, NATIVE_MACH needs to be redefined in the
571# environment as `uname -p` to override this macro.
572#
573# For now at least, we cross-compile amd64 on i386 machines.
574NATIVE_MACH=	$(MACH:amd64=i386)
575
576# Define native compilation macros
577#
578
579# Base directory where compilers are loaded.
580# Defined here so it can be overridden by developer.
581#
582SPRO_ROOT=		$(BUILD_TOOLS)/SUNWspro
583SPRO_VROOT=		$(SPRO_ROOT)/SOS10
584GNU_ROOT=		$(SFW_ROOT)
585
586# Specify platform compiler versions for languages
587# that we use (currently only c and c++).
588#
589sparc_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
590$(__GNUC)sparc_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
591sparc_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
592$(__GNUC)sparc_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
593sparc_CPP=		/usr/ccs/lib/cpp
594sparc_AS=		/usr/ccs/bin/as -xregsym=no
595sparc_LD=		/usr/ccs/bin/ld
596sparc_LINT=		$(SPRO_VROOT)/bin/lint
597
598sparcv9_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
599$(__GNUC64)sparcv9_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
600sparcv9_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
601$(__GNUC64)sparcv9_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
602sparcv9_CPP=		/usr/ccs/lib/cpp
603sparcv9_AS=		/usr/ccs/bin/as -xregsym=no
604sparcv9_LD=		/usr/ccs/bin/ld
605sparcv9_LINT=		$(SPRO_VROOT)/bin/lint
606
607# We compile 32-bit objects with cc by default
608i386_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
609$(__GNUC)i386_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
610i386_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
611$(__GNUC)i386_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
612i386_CPP=		/usr/ccs/lib/cpp
613i386_AS=		/usr/ccs/bin/as
614$(__GNUC)i386_AS=	$(ONBLD_TOOLS)/bin/$(MACH)/aw
615i386_LD=		/usr/ccs/bin/ld
616i386_LINT=		$(SPRO_VROOT)/bin/lint
617
618# We compile 64-bit objects with gcc
619amd64_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
620$(__GNUC64)amd64_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
621amd64_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
622$(__GNUC64)amd64_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
623amd64_CPP=		/usr/ccs/lib/cpp
624amd64_AS=		$(ONBLD_TOOLS)/bin/$(MACH)/aw
625amd64_LD=		/usr/ccs/bin/ld
626amd64_LINT=		$(SPRO_VROOT)/bin/lint
627
628NATIVECC=		$($(NATIVE_MACH)_CC)
629NATIVECCC=		$($(NATIVE_MACH)_CCC)
630NATIVECPP=		$($(NATIVE_MACH)_CPP)
631NATIVEAS=		$($(NATIVE_MACH)_AS)
632NATIVELD=		$($(NATIVE_MACH)_LD)
633NATIVELINT=		$($(NATIVE_MACH)_LINT)
634
635#
636# Makefile.master.64 overrides these settings
637#
638CC=			$(NATIVECC)
639CCC=			$(NATIVECCC)
640CPP=			$(NATIVECPP)
641AS=			$(NATIVEAS)
642LD=			$(NATIVELD)
643LINT=			$(NATIVELINT)
644
645# The real compilers used for this build
646CW_CC_CMD=		$(CC) -_compiler
647CW_CCC_CMD=		$(CCC) -_compiler
648REAL_CC=		$(CW_CC_CMD:sh)
649REAL_CCC=		$(CW_CCC_CMD:sh)
650
651# Pass -Y flag to cpp (method of which is release-dependent)
652CCYFLAG=		-Y I,
653
654BDIRECT=	-Bdirect
655BDYNAMIC=	-Bdynamic
656BLOCAL=		-Blocal
657BREDUCE=	-Breduce
658BSTATIC=	-Bstatic
659BSYMBOLIC=	-Bsymbolic
660
661ZCOMBRELOC=	-zcombreloc
662ZDEFS=		-zdefs
663ZIGNORE=	-zignore
664ZINITFIRST=	-zinitfirst
665ZINTERPOSE=	-zinterpose
666ZLAZYLOAD=	-zlazyload
667ZLOADFLTR=	-zloadfltr
668ZMULDEFS=	-zmuldefs
669ZNODEFAULTLIB=	-znodefaultlib
670ZNODEFS=	-znodefs
671ZNODELETE=	-znodelete
672ZNODLOPEN=	-znodlopen
673ZNODUMP=	-znodump
674ZNOLAZYLOAD=	-znolazyload
675ZNORELOC=	-znoreloc
676ZNOVERSION=	-znoversion
677ZREDLOCSYM=	-zredlocsym
678ZTEXT=		-ztext
679
680GSHARED=	-G
681CCMT=		-mt
682
683# Handle different PIC models on different ISAs
684# (May be overridden by lower-level Makefiles)
685
686sparc_C_PICFLAGS =	-K pic
687sparcv9_C_PICFLAGS =	-K pic
688i386_C_PICFLAGS =	-K pic
689amd64_C_PICFLAGS =	-K pic
690C_PICFLAGS =		$($(MACH)_C_PICFLAGS)
691C_PICFLAGS64 =		$($(MACH64)_C_PICFLAGS)
692
693sparc_C_BIGPICFLAGS =	-K PIC
694sparcv9_C_BIGPICFLAGS =	-K PIC
695i386_C_BIGPICFLAGS =	-K PIC
696amd64_C_BIGPICFLAGS =	-K PIC
697C_BIGPICFLAGS =		$($(MACH)_C_BIGPICFLAGS)
698C_BIGPICFLAGS64 =	$($(MACH64)_C_BIGPICFLAGS)
699
700# CC requires there to be no space between '-K' and 'pic' or 'PIC'.
701sparc_CC_PICFLAGS =	-Kpic
702sparcv9_CC_PICFLAGS =	-KPIC
703i386_CC_PICFLAGS = 	-Kpic
704amd64_CC_PICFLAGS = 	-Kpic
705CC_PICFLAGS =		$($(MACH)_CC_PICFLAGS)
706CC_PICFLAGS64 =		$($(MACH64)_CC_PICFLAGS)
707
708AS_PICFLAGS=		$(C_PICFLAGS)
709AS_BIGPICFLAGS=		$(C_BIGPICFLAGS)
710
711#
712# Default label for CTF sections
713#
714CTFCVTFLAGS=		-i -L VERSION
715
716#
717# Override to pass module-specific flags to ctfmerge.  Currently used
718# only by krtld to turn on fuzzy matching.
719#
720CTFMRGFLAGS=
721
722CTFCONVERT_O		= $(CTFCONVERT) $(CTFCVTFLAGS) $@
723
724ELFSIGN_O=	$(TRUE)
725ELFSIGN_CRYPTO=	$(ELFSIGN_O)
726ELFSIGN_OBJECT=	$(ELFSIGN_O)
727$(EXPORT_RELEASE_BUILD)ELFSIGN_O =	$(ELFSIGN)
728$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY =	\
729			$(CLOSED)/cmd/cmd-crypto/etc/keys/SUNWosnet
730$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT=	\
731			$(CLOSED)/cmd/cmd-crypto/etc/certs/SUNWosnet
732$(EXPORT_RELEASE_BUILD)ELFSIGN_SEKEY =	\
733			$(CLOSED)/cmd/cmd-crypto/etc/keys/SUNWosnetSolaris
734$(EXPORT_RELEASE_BUILD)ELFSIGN_SECERT=	\
735			$(CLOSED)/cmd/cmd-crypto/etc/certs/SUNWosnetSolaris
736$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO=	$(ELFSIGN_O) sign \
737			$(ELFSIGN_FORMAT_OPTION) \
738			-k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@
739$(EXPORT_RELEASE_BUILD)ELFSIGN_OBJECT=	$(ELFSIGN_O) sign \
740			$(ELFSIGN_FORMAT_OPTION) \
741			-k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@
742
743# Rules (normally from make.rules) and macros which are used for post
744# processing files. Normally, these do stripping of the comment section
745# automatically.
746#    RELEASE_CM:	Should be editted to reflect the release.
747#    POST_PROCESS_O:	Post-processing for `.o' files.
748#    POST_PROCESS_A:	Post-processing for `.a' files (currently null).
749#    POST_PROCESS_SO:	Post-processing for `.so' files.
750#    POST_PROCESS:	Post-processing for executable files (no suffix).
751# Note that these macros are not completely generalized as they are to be
752# used with the file name to be processed following.
753#
754# It is left as an exercise to Release Engineering to embellish the generation
755# of the release comment string.
756#
757#	If this is a standard development build:
758#		compress the comment section (mcs -c)
759#		add the standard comment (mcs -a $(RELEASE_CM))
760#		add the development specific comment (mcs -a $(DEV_CM))
761#
762#	If this is an installation build:
763#		delete the comment section (mcs -d)
764#		add the standard comment (mcs -a $(RELEASE_CM))
765#		add the development specific comment (mcs -a $(DEV_CM))
766#
767#	If this is an release build:
768#		delete the comment section (mcs -d)
769#		add the standard comment (mcs -a $(RELEASE_CM))
770#
771#	The ONVERS macro sets the default value for the VERSION string
772#	within pkginfo.
773#
774# The following list of macros are used in the definition of RELEASE_CM
775# which is used to label all binaries in the build:
776#
777# 	RELEASE		Specific release of the build, eg: 5.2
778#	VERSION		Version of the build (alpha, beta, Generic)
779#	PATCHID		If this is a patch this value should contain
780#			the patchid value (eg: "Generic 100832-01"), otherwise
781#			it will be set to $(VERSION)
782#	RELEASE_DATE	Date of the Release Build
783#	PATCH_DATE	Date the patch was created, if this is blank it
784#			will default to the RELEASE_DATE
785#
786ONVERS=		"11.11"
787RELEASE=	5.11
788VERSION=	SunOS Development
789PATCHID=	$(VERSION)
790RELEASE_DATE=	October 2007
791PATCH_DATE=	$(RELEASE_DATE)
792RELEASE_CM=	"@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)"
793DEV_CM=		"@($(POUND_SIGN))SunOS Internal Development: \
794`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"
795
796PROCESS_COMMENT=		   @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM)
797$(STRIP_COMMENTS)PROCESS_COMMENT=  @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM)
798$(RELEASE_BUILD)PROCESS_COMMENT=   @?${MCS} -d -a $(RELEASE_CM)
799
800STRIP_STABS=			   :
801$(RELEASE_BUILD)STRIP_STABS=	   $(STRIP) -x $@
802
803POST_PROCESS_O=		$(PROCESS_COMMENT) $@
804POST_PROCESS_A=
805POST_PROCESS_SO=	$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
806			$(ELFSIGN_OBJECT)
807POST_PROCESS=		$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
808			$(ELFSIGN_OBJECT)
809
810#
811# The PKGDEFS macro points to the source directory containing the majority
812# of ON's package definitions plus Makefiles with general package creation
813# rules.
814#
815# PKGARCHIVE specifies the default location where packages should be
816# placed if built.
817#
818PKGDEFS=$(SRC)/pkgdefs
819$(RELEASE_BUILD)PKGARCHIVESUFFIX=	-nd
820PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX)
821
822#	Default build rules which perform comment section post-processing.
823#
824.c:
825	$(LINK.c) -o $@ $< $(LDLIBS)
826	$(POST_PROCESS)
827.c.o:
828	$(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK)
829	$(POST_PROCESS_O)
830.c.a:
831	$(COMPILE.c) -o $% $<
832	$(PROCESS_COMMENT) $%
833	$(AR) $(ARFLAGS) $@ $%
834	$(RM) $%
835.s.o:
836	$(COMPILE.s) -o $@ $<
837	$(POST_PROCESS_O)
838.s.a:
839	$(COMPILE.s) -o $% $<
840	$(PROCESS_COMMENT) $%
841	$(AR) $(ARFLAGS) $@ $%
842	$(RM) $%
843.cc:
844	$(LINK.cc) -o $@ $< $(LDLIBS)
845	$(POST_PROCESS)
846.cc.o:
847	$(COMPILE.cc) $(OUTPUT_OPTION) $<
848	$(POST_PROCESS_O)
849.cc.a:
850	$(COMPILE.cc) -o $% $<
851	$(AR) $(ARFLAGS) $@ $%
852	$(PROCESS_COMMENT) $%
853	$(RM) $%
854.y:
855	$(YACC.y) $<
856	$(LINK.c) -o $@ y.tab.c $(LDLIBS)
857	$(POST_PROCESS)
858	$(RM) y.tab.c
859.y.o:
860	$(YACC.y) $<
861	$(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK)
862	$(POST_PROCESS_O)
863	$(RM) y.tab.c
864.l:
865	$(RM) $*.c
866	$(LEX.l) $< > $*.c
867	$(LINK.c) -o $@ $*.c -ll $(LDLIBS)
868	$(POST_PROCESS)
869	$(RM) $*.c
870.l.o:
871	$(RM) $*.c
872	$(LEX.l) $< > $*.c
873	$(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK)
874	$(POST_PROCESS_O)
875	$(RM) $*.c
876
877.java.class:
878	$(COMPILE.java) $<
879
880#
881# Rules to create message catalogue files from .sh, .c, .y, and .l files.
882# For .sh files, we extract all gettext strings with sed(1) (being careful
883# to permit multiple gettext strings on the same line), weed out the dups,
884# and build the catalogue with awk(1).
885#
886
887.sh.po:
888	$(SED) -n -e ":a" 					\
889		  -e "h" 					\
890		  -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p"	\
891		  -e "x"					\
892		  -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/"	\
893		  -e "t a"					\
894	       $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@
895
896#
897# When using xgettext, we want messages to go to the default domain,
898# rather than the specified one.  This special version of the
899# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN,
900# causing xgettext to put all messages into the default domain.
901#
902CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN)
903
904.c.i:
905	$(CPPFORPO) $< > $@
906
907.h.i:
908	$(CPPFORPO) $< > $@
909
910.y.i:
911	$(YACC) -d $<
912	$(CPPFORPO) y.tab.c  > $@
913	$(RM) y.tab.c
914
915.l.i:
916	$(LEX) $<
917	$(CPPFORPO) lex.yy.c  > $@
918	$(RM) lex.yy.c
919
920.c.po:
921	$(CPPFORPO) $< > $<.i
922	$(BUILD.po)
923
924.y.po:
925	$(YACC) -d $<
926	$(CPPFORPO) y.tab.c  > $<.i
927	$(BUILD.po)
928	$(RM) y.tab.c
929
930.l.po:
931	$(LEX) $<
932	$(CPPFORPO) lex.yy.c  > $<.i
933	$(BUILD.po)
934	$(RM) lex.yy.c
935
936#
937# Rules to perform stylistic checks
938#
939.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk
940
941.h.check:
942	$(DOT_H_CHECK)
943
944.x.check:
945	$(DOT_X_CHECK)
946
947.xml.xmlchk:
948	$(MANIFEST_CHECK)
949
950#
951# Rules to process ONC+ Source partial files
952#
953%_onc_plus:	%
954	@$(ECHO) "extracting code from $< ... "
955	sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $<  > $@
956
957#
958# Include rules to render automated sccs get rules "safe".
959#
960include $(SRC)/Makefile.noget
961