1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# ident "%Z%%M% %I% %E% SMI" 27# 28# Makefile.master, global definitions for system source 29# 30ROOT= /proto 31 32# Historically, ON builds were always done with root permissions, and the 33# owner/group information was duplicated in the Makefiles and the packaging 34# data and kept in sync by manual intervention. This is no longer true. 35# The only source of this information is packaging. The proto area ($ROOT) 36# does not have definitive onwer/group information, and no Makefile should 37# attempt to set this. CH once toggled operations restricted to root. It 38# is now just set to `#'. 39# 40# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all 41# be stripped completely from the source base. They are kept for now until 42# on10-based projects can merge and transition away from them. 43# 44# RELEASE_BUILD should be cleared for final release builds. This is completely 45# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies. 46# 47# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls 48# identification strings. Enabling RELEASE_BUILD automatically enables 49# INTERNAL_RELEASE_BUILD. 50# 51# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that 52# can be released for export under a binary license. It is orthogonal to 53# the other *RELEASE_BUILD settings. 54# 55# STRIP_COMMENTS toggles comment section striping. Generally the same setting 56# as INTERNAL_RELEASE_BUILD. 57# 58# STRIPFLAG is similar. It is set here for use in lower level Makefiles to 59# allow a single point change to affect the entire build. 60# 61# __GNUC toggles the building of ON components using gcc and related tools. 62# Normally set to `#', set it to `' to do gcc build. 63# 64# The declaration POUND_SIGN is always '#'. This is needed to get around the 65# make feature that '#' is always a comment delimiter, even when escaped or 66# quoted. The only way of generating this is the :sh macro mechanism. Note 67# however that in general :sh macros should be avoided in makefiles that are 68# widely included into other makefiles, as the resulting shell executions can 69# cause a noticable slowdown in build times. 70# 71POUND_SIGN:sh= echo \\043 72CH= $(POUND_SIGN) 73 74NOT_RELEASE_BUILD= 75INTERNAL_RELEASE_BUILD= $(POUND_SIGN) 76RELEASE_BUILD= $(POUND_SIGN) 77EXPORT_RELEASE_BUILD= 78$(RELEASE_BUILD)NOT_RELEASE_BUILD= $(POUND_SIGN) 79$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD= 80PATCH_BUILD= $(POUND_SIGN) 81 82# SPARC_BLD is '#' for an Intel build. 83# INTEL_BLD is '#' for a Sparc build. 84SPARC_BLD_1= $(MACH:i386=$(POUND_SIGN)) 85SPARC_BLD= $(SPARC_BLD_1:sparc=) 86INTEL_BLD_1= $(MACH:sparc=$(POUND_SIGN)) 87INTEL_BLD= $(INTEL_BLD_1:i386=) 88 89STRIP_COMMENTS= $(INTERNAL_RELEASE_BUILD) 90 91# Historical notes: at one point, STRIPFLAG was set to '-s' for root builds, 92# and empty for non-root. It's now set empty all the time, so that builds 93# using manual invocation of "make install" will have debug data (as they did 94# when run as non-root before). The 'nightly' script overrides DEF_STRIPFLAG 95# with '-s' so that nightly builds are stripped -- since nightlies were once 96# done only as root, that preserves the known nightly behavior. The 97# non-nightly behavior can always be overridden by putting "STRIPFLAG=" in the 98# environment, on the 'make' command line, or by overriding STRIPFLAG in the 99# subsystem Makefile itself. STRIP_COMMENTS, although similar in nature, has 100# always been controlled by INTERNAL_RELEASE_BUILD (always set by nightly). 101 102DEF_STRIPFLAG= 103STRIPFLAG=$(DEF_STRIPFLAG) 104 105# set __GNUC= in the environment to build 32-bit with the gcc compiler. 106__GNUC= $(POUND_SIGN) 107 108# set __GNUC64 to '#' in the environment to build 64-bit with the Studio 109# compiler. 110__GNUC64= 111 112# BUILD_TOOLS is the root of all tools including compilers. 113# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld. 114 115BUILD_TOOLS= /ws/onnv-tools 116ONBLD_TOOLS= $(BUILD_TOOLS)/onbld 117 118JAVA_ROOT= /usr/java 119 120SFW_ROOT= /usr/sfw 121SFWINCDIR= $(SFW_ROOT)/include 122SFWLIBDIR= $(SFW_ROOT)/lib 123SFWLIBDIR64= $(SFW_ROOT)/lib/$(MACH64) 124 125RPCGEN= /usr/bin/rpcgen 126STABS= $(ONBLD_TOOLS)/bin/$(MACH)/stabs 127ECHO= echo 128INS= install 129TRUE= true 130SYMLINK= /usr/bin/ln -s 131LN= /usr/bin/ln 132CHMOD= /usr/bin/chmod 133CHOWN= $(TRUE) 134CHGRP= $(TRUE) 135MV= /usr/bin/mv -f 136RM= /usr/bin/rm -f 137GREP= /usr/bin/grep 138SED= /usr/bin/sed 139NAWK= /usr/bin/nawk 140CP= /usr/bin/cp -f 141MCS= /usr/ccs/bin/mcs 142CAT= /usr/bin/cat 143M4= /usr/ccs/bin/m4 144STRIP= /usr/ccs/bin/strip 145LEX= /usr/ccs/bin/lex 146YACC= /usr/ccs/bin/yacc 147CPP= /usr/lib/cpp 148JAVAC= $(JAVA_ROOT)/bin/javac 149JAVAH= $(JAVA_ROOT)/bin/javah 150JAVADOC= $(JAVA_ROOT)/bin/javadoc 151RMIC= $(JAVA_ROOT)/bin/rmic 152JAR= $(JAVA_ROOT)/bin/jar 153CTFCONVERT= $(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert 154CTFMERGE= $(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge 155CTFSTABS= $(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs 156GENOFFSETS= $(ONBLD_TOOLS)/bin/genoffsets 157CTFCVTPTBL= $(ONBLD_TOOLS)/bin/ctfcvtptbl 158CTFFINDMOD= $(ONBLD_TOOLS)/bin/ctffindmod 159XREF= $(ONBLD_TOOLS)/bin/xref 160FIND= /usr/bin/find 161PERL= /usr/bin/perl 162SORT= /usr/bin/sort 163TOUCH= /usr/bin/touch 164WC= /usr/bin/wc 165XARGS= /usr/bin/xargs 166ELFSIGN= /usr/bin/elfsign 167DTRACE= /usr/sbin/dtrace 168 169FILEMODE= 644 170DIRMODE= 755 171 172# Note: owner and group for proto area objects is no longer set by 173# Makefiles at all. These have no real effect and are kept here for 174# transition purposes. They (along with CH, CHOWN, and CHGRP) should be 175# removed early in the s11 development cycle. 176OWNER= root 177GROUP= bin 178 179# 180# The version of the patch makeup table optimized for build-time use. Used 181# during patch builds only. 182$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo 183 184# Declare that nothing should be built in parallel. 185# Individual Makefiles can use the .PARALLEL target to declare otherwise. 186.NO_PARALLEL: 187 188# For stylistic checks 189# 190# Note that the X and C checks are not used at this time and may need 191# modification when they are actually used. 192# 193CSTYLE= cstyle 194CSTYLE_TAIL= 195HDRCHK= hdrchk 196HDRCHK_TAIL= 197JSTYLE= jstyle 198 199DOT_H_CHECK= \ 200 @$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \ 201 $(HDRCHK) $< $(HDRCHK_TAIL) 202 203DOT_X_CHECK= \ 204 @$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \ 205 $(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL) 206 207DOT_C_CHECK= \ 208 @$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL) 209 210MANIFEST_CHECK= \ 211 @$(ECHO) "checking $<"; \ 212 SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \ 213 $(SRC)/cmd/svc/svccfg/svccfg-native validate $< 214 215INS.file= $(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $< 216INS.dir= $(INS) -s -d -m $(DIRMODE) $@ 217# installs and renames at once 218# 219INS.rename= $(INS.file); $(MV) $(@D)/$(<F) $@ 220 221# install a link 222INSLINKTARGET= $< 223INS.link= $(RM) $@; $(LN) $(INSLINKTARGET) $@ 224 225# MACH must be set in the shell environment per uname -p on the build host 226# More specific architecture variables should be set in lower makefiles. 227# 228# MACH64 is derived from MACH, and BUILD64 is set to `#' for 229# architectures on which we do not build 64-bit versions. 230# (There are no such architectures at the moment.) 231# 232# Set BUILD64=# in the environment to disable 64-bit amd64 233# builds on i386 machines. 234 235MACH64_1= $(MACH:sparc=sparcv9) 236MACH64= $(MACH64_1:i386=amd64) 237 238MACH32_1= $(MACH:sparc=sparcv7) 239MACH32= $(MACH32_1:i386=i86) 240 241sparc_BUILD64= 242i386_BUILD64= 243BUILD64= $($(MACH)_BUILD64) 244 245# 246# C compiler mode. Future compilers may change the default on us, 247# so force extended ANSI mode globally. Lower level makefiles can 248# override this by setting CCMODE. 249# 250CCMODE= -Xa 251CCMODE64= -Xa 252 253# 254# C compiler verbose mode. This is so we can enable it globally, 255# but turn it off in the lower level makefiles of things we cannot 256# (or aren't going to) fix. 257# 258CCVERBOSE= -v 259 260# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings 261# from the compiler about places the -xarch=v9 may differ from -xarch=v9c. 262V9ABIWARN= 263 264# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register 265# symbols (used to detect conflicts between objects that use global registers) 266# we disable this now for safety, and because genunix doesn't link with 267# this feature (the v9 default) enabled. 268# 269# REGSYM is separate since the C++ driver syntax is different. 270CCREGSYM= -Wc,-Qiselect-regsym=0 271CCCREGSYM= -Qoption cg -Qiselect-regsym=0 272 273# 274# generate 32-bit addresses in the v9 kernel. Saves memory. 275CCABS32= -Wc,-xcode=abs32 276 277# One optimization the compiler might perform is to turn this: 278# #pragma weak foo 279# extern int foo; 280# if (&foo) 281# foo = 5; 282# into 283# foo = 5; 284# Since we do some of this (foo might be referenced in common kernel code 285# but provided only for some cpu modules or platforms), we disable this 286# optimization. 287# 288sparc_CCUNBOUND = -Wd,-xsafe=unboundsym 289i386_CCUNBOUND = 290CCUNBOUND = $($(MACH)_CCUNBOUND) 291 292# 293# compiler '-xarch' flag. This is here to centralize it and make it 294# overridable for testing. 295sparc_XARCH= -xarch=v8 296sparcv9_XARCH= -xarch=v9 297i386_XARCH= 298amd64_XARCH= -xarch=amd64 -Ui386 -U__i386 299 300# assembler '-xarch' flag. Different from compiler '-xarch' flag. 301sparc_AS_XARCH= -xarch=v8 302sparcv9_AS_XARCH= -xarch=v9 303i386_AS_XARCH= 304amd64_AS_XARCH= -xarch=amd64 -P -Ui386 -U__i386 305 306# 307# These flags define what we need to be 'standalone' i.e. -not- part 308# of the rather more cosy userland environment. This basically means 309# the kernel. 310# 311# XX64 future versions of gcc will make -mcmodel=kernel imply -mno-red-zone 312# 313sparc_STAND_FLAGS= 314sparcv9_STAND_FLAGS= 315i386_STAND_FLAGS= -_gcc=-ffreestanding 316amd64_STAND_FLAGS= -Wu,-xmodel=kernel 317 318SAVEARGS= -Wu,-save_args 319$(__GNUC64)SAVEARGS= 320amd64_STAND_FLAGS += $(SAVEARGS) 321 322STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS) 323STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS) 324 325# 326# disable the incremental linker 327ILDOFF= -xildoff 328# 329XDEPEND= -xdepend 330XFFLAG= -xF 331XESS= -xs 332XSTRCONST= -xstrconst 333 334# 335# turn warnings into errors (C) 336CERRWARN = -errtags=yes -errwarn=%all 337CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT 338CERRWARN += -erroff=E_STATEMENT_NOT_REACHED 339 340# 341# turn warnings into errors (C++) 342CCERRWARN= -xwe 343 344# C99 mode 345C99_ENABLE= -xc99=%all 346C99_DISABLE= -xc99=%none 347C99MODE= $(C99_DISABLE) 348C99LMODE= -Xc99=%none 349 350# In most places, assignments to these macros should be appended with += 351# (CPPFLAGS.master allows values to be prepended to CPPFLAGS). 352sparc_CFLAGS= $(sparc_XARCH) 353sparcv9_CFLAGS= $(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM) 354i386_CFLAGS= $(i386_XARCH) 355amd64_CFLAGS= $(amd64_XARCH) 356 357sparc_ASFLAGS= $(sparc_AS_XARCH) 358sparcv9_ASFLAGS=$(sparcv9_AS_XARCH) 359i386_ASFLAGS= $(i386_AS_XARCH) 360amd64_ASFLAGS= $(amd64_AS_XARCH) 361 362# 363sparc_COPTFLAG= -xO3 364sparcv9_COPTFLAG= -xO3 365i386_COPTFLAG= -O 366amd64_COPTFLAG= -O 367 368COPTFLAG= $($(MACH)_COPTFLAG) 369COPTFLAG64= $($(MACH64)_COPTFLAG) 370 371# When -g is used, the compiler globalizes static objects 372# (gives them a unique prefix). Disable that. 373CNOGLOBAL= -W0,-noglobal 374 375# 376# Flags used to build in debug mode for ctf generation. Bugs in the Devpro 377# compilers currently prevent us from building with cc-emitted DWARF. 378# 379CTF_FLAGS_sparc = -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL) 380CTF_FLAGS_i386 = -g $(C99MODE) $(CNOGLOBAL) 381CTF_FLAGS = $(CTF_FLAGS_$(MACH)) 382 383# 384# Flags used with genoffsets 385# 386GOFLAGS = 387$(INTEL_BLD)GOFLAGS = -_noecho \ 388 -_gcc=-fno-eliminate-unused-debug-symbols \ 389 -_gcc=-fno-eliminate-unused-debug-types 390 391OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \ 392 $(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS) 393 394OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \ 395 $(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS) 396 397# 398# tradeoff time for space (smaller is better) 399# 400sparc_SPACEFLAG = -xspace -W0,-Lt -W2,-Rcond_elim 401sparcv9_SPACEFLAG = -xspace -W0,-Lt -W2,-Rcond_elim 402i386_SPACEFLAG = -xspace 403amd64_SPACEFLAG = 404 405SPACEFLAG = $($(MACH)_SPACEFLAG) 406SPACEFLAG64 = $($(MACH64)_SPACEFLAG) 407 408sparc_XREGSFLAG = -xregs=no%appl 409sparcv9_XREGSFLAG = -xregs=no%appl 410i386_XREGSFLAG = 411amd64_XREGSFLAG = 412 413XREGSFLAG = $($(MACH)_XREGSFLAG) 414XREGSFLAG64 = $($(MACH64)_XREGSFLAG) 415 416CFLAGS= $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \ 417 $(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) 418CFLAGS64= $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \ 419 $(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND) 420NATIVE_CFLAGS= $(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \ 421 $(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND) 422 423DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\" # For messaging. 424DTS_ERRNO=-D_TS_ERRNO 425CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \ 426 $(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4) 427CPPFLAGS= $(CPPFLAGS.master) 428AS_CPPFLAGS= $(CPPFLAGS.master) 429JAVAFLAGS= -deprecation 430 431# 432# For source message catalogue 433# 434.SUFFIXES: $(SUFFIXES) .i .po 435MSGROOT= $(ROOT)/catalog 436MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN) 437MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE) 438DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN) 439DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po) 440 441CLOBBERFILES += $(POFILE) $(POFILES) 442COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS) 443XGETTEXT= /usr/bin/xgettext 444XGETFLAGS= -c TRANSLATION_NOTE 445BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\ 446 $(RM) $@ ;\ 447 sed "/^domain/d" < $(<F).po > $@ ;\ 448 $(RM) $(<F).po $<.i 449# 450# This is overwritten by local Makefile when PROG is a list. 451# 452POFILE= $(PROG).po 453 454sparc_CCFLAGS= -cg92 -compat=4 \ 455 -Qoption ccfe -messages=no%anachronism \ 456 $(CCERRWARN) 457sparcv9_CCFLAGS= $(sparcv9_XARCH) -dalign -compat=5 \ 458 -Qoption ccfe -messages=no%anachronism \ 459 -Qoption ccfe -features=no%conststrings \ 460 $(CCCREGSYM) \ 461 $(CCERRWARN) 462i386_CCFLAGS= -compat=4 \ 463 -Qoption ccfe -messages=no%anachronism \ 464 -Qoption ccfe -features=no%conststrings \ 465 $(CCERRWARN) 466amd64_CCFLAGS= $(amd64_XARCH) -compat=5 \ 467 -Qoption ccfe -messages=no%anachronism \ 468 -Qoption ccfe -features=no%conststrings \ 469 $(CCERRWARN) 470 471sparc_CCOPTFLAG= -O 472sparcv9_CCOPTFLAG= -O 473i386_CCOPTFLAG= -O 474amd64_CCOPTFLAG= -O 475 476CCOPTFLAG= $($(MACH)_CCOPTFLAG) 477CCOPTFLAG64= $($(MACH64)_CCOPTFLAG) 478CCFLAGS= $(CCOPTFLAG) $($(MACH)_CCFLAGS) 479CCFLAGS64= $(CCOPTFLAG64) $($(MACH64)_CCFLAGS) 480# 481# Used by Makefile.cmd, Makefile.lib and Makefile.ucbcmd 482# 483PGA_MAPFILE = $(SRC)/cmd/sgs/mapfiles/$(MACH)/map.pagealign 484# 485# 486# LDLIBS32 can be set in the environment to override the following assignment. 487# LDLIBS64 can be set to override the assignment made in Makefile.master.64. 488# These environment settings make sure that no libraries are searched outside 489# of the local workspace proto area: 490# LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib 491# LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64 492# 493LDLIBS32 = $(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3) 494LDLIBS.cmd = $(LDLIBS32) 495LDLIBS.lib = $(LDLIBS32) 496# 497# Define compilation macros. 498# 499COMPILE.c= $(CC) $(CFLAGS) $(CPPFLAGS) -c 500COMPILE64.c= $(CC) $(CFLAGS64) $(CPPFLAGS) -c 501COMPILE.cc= $(CCC) $(CCFLAGS) $(CPPFLAGS) -c 502COMPILE64.cc= $(CCC) $(CCFLAGS64) $(CPPFLAGS) -c 503COMPILE.s= $(AS) $(ASFLAGS) $(AS_CPPFLAGS) 504COMPILE64.s= $(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS) 505COMPILE.d= $(DTRACE) -G -32 506COMPILE64.d= $(DTRACE) -G -64 507 508CLASSPATH= . 509COMPILE.java= $(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH) 510 511# 512# Link time macros 513# 514CCNEEDED = -lC 515# XX64 What to do about libstdc++ for g++ ??? 516 517LINK.c= $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) 518LINK64.c= $(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS) 519NORUNPATH= -norunpath -nolib 520LINK.cc= $(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \ 521 $(LDFLAGS) $(CCNEEDED) 522LINK64.cc= $(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \ 523 $(LDFLAGS) $(CCNEEDED) 524 525# 526# lint macros 527# 528# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once 529# ON is built with a version of lint that has the fix for 4484186. 530# 531ALWAYS_LINT_DEFS = -errtags=yes -s 532ALWAYS_LINT_DEFS += -erroff=E_PTRDIFF_OVERFLOW 533ALWAYS_LINT_DEFS += -erroff=E_ASSIGN_NARROW_CONV 534ALWAYS_LINT_DEFS += -U__PRAGMA_REDEFINE_EXTNAME 535ALWAYS_LINT_DEFS += $(C99LMODE) 536ALWAYS_LINT_DEFS += -errsecurity=$(SECLEVEL) 537ALWAYS_LINT_DEFS += -erroff=E_SEC_CREAT_WITHOUT_EXCL 538ALWAYS_LINT_DEFS += -erroff=E_SEC_FORBIDDEN_WARN_CREAT 539# XX64 -- really only needed for amd64 lint 540ALWAYS_LINT_DEFS += -erroff=E_ASSIGN_INT_TO_SMALL_INT 541ALWAYS_LINT_DEFS += -erroff=E_CAST_INT_CONST_TO_SMALL_INT 542ALWAYS_LINT_DEFS += -erroff=E_CAST_INT_TO_SMALL_INT 543ALWAYS_LINT_DEFS += -erroff=E_CAST_TO_PTR_FROM_INT 544ALWAYS_LINT_DEFS += -erroff=E_COMP_INT_WITH_LARGE_INT 545ALWAYS_LINT_DEFS += -erroff=E_INTEGRAL_CONST_EXP_EXPECTED 546ALWAYS_LINT_DEFS += -erroff=E_PASS_INT_TO_SMALL_INT 547ALWAYS_LINT_DEFS += -erroff=E_PTR_CONV_LOSES_BITS 548 549SECLEVEL= core 550LINT.c= $(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS) 551LINT64.c= $(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS) 552LINT.s= $(LINT.c) 553 554# For some future builds, NATIVE_MACH and MACH might be different. 555# Therefore, NATIVE_MACH needs to be redefined in the 556# environment as `uname -p` to override this macro. 557# 558# For now at least, we cross-compile amd64 on i386 machines. 559NATIVE_MACH= $(MACH:amd64=i386) 560 561# Define native compilation macros 562# 563 564# Base directory where compilers are loaded. 565# Defined here so it can be overridden by developer. 566# 567SPRO_ROOT= $(BUILD_TOOLS)/SUNWspro 568SPRO_VROOT= $(SPRO_ROOT)/SOS8 569GNU_ROOT= $(SFW_ROOT) 570 571# Specify platform compiler versions for languages 572# that we use (currently only c and c++). 573# 574sparc_CC= $(SPRO_VROOT)/bin/cc 575sparc_CCC= $(SPRO_VROOT)/bin/CC 576sparc_CPP= /usr/ccs/lib/cpp 577sparc_AS= /usr/ccs/bin/as -xregsym=no 578sparc_LD= /usr/ccs/bin/ld 579sparc_LINT= $(SPRO_VROOT)/bin/lint 580 581sparcv9_CC= $(SPRO_VROOT)/bin/cc 582sparcv9_CCC= $(SPRO_VROOT)/bin/CC 583sparcv9_CPP= /usr/ccs/lib/cpp 584sparcv9_AS= /usr/ccs/bin/as -xregsym=no 585sparcv9_LD= /usr/ccs/bin/ld 586sparcv9_LINT= $(SPRO_VROOT)/bin/lint 587 588# We compile 32-bit objects with cc by default 589i386_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 590$(__GNUC)i386_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 591i386_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 592$(__GNUC)i386_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 593i386_CPP= /usr/ccs/lib/cpp 594i386_AS= /usr/ccs/bin/as 595$(__GNUC)i386_AS= $(ONBLD_TOOLS)/bin/$(MACH)/aw 596i386_LD= /usr/ccs/bin/ld 597i386_LINT= $(SPRO_VROOT)/bin/lint 598 599# We compile 64-bit objects with gcc 600amd64_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc 601$(__GNUC64)amd64_CC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc 602amd64_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC 603$(__GNUC64)amd64_CCC= $(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++ 604amd64_CPP= /usr/ccs/lib/cpp 605amd64_AS= $(ONBLD_TOOLS)/bin/$(MACH)/aw 606amd64_LD= /usr/ccs/bin/ld 607amd64_LINT= $(SPRO_ROOT)/SOS10-EA/bin/lint 608 609NATIVECC= $($(NATIVE_MACH)_CC) 610NATIVECCC= $($(NATIVE_MACH)_CCC) 611NATIVECPP= $($(NATIVE_MACH)_CPP) 612NATIVEAS= $($(NATIVE_MACH)_AS) 613NATIVELD= $($(NATIVE_MACH)_LD) 614NATIVELINT= $($(NATIVE_MACH)_LINT) 615 616# 617# Makefile.master.64 overrides these settings 618# 619CC= $(NATIVECC) 620CCC= $(NATIVECCC) 621CPP= $(NATIVECPP) 622AS= $(NATIVEAS) 623LD= $(NATIVELD) 624LINT= $(NATIVELINT) 625 626# Pass -Y flag to cpp (method of which is release-dependent) 627CCYFLAG= -Y I, 628 629BDIRECT= -Bdirect 630BDYNAMIC= -Bdynamic 631BLOCAL= -Blocal 632BREDUCE= -Breduce 633BSTATIC= -Bstatic 634BSYMBOLIC= -Bsymbolic 635 636ZCOMBRELOC= -zcombreloc 637ZDEFS= -zdefs 638ZIGNORE= -zignore 639ZINITFIRST= -zinitfirst 640ZINTERPOSE= -zinterpose 641ZLAZYLOAD= -zlazyload 642ZLOADFLTR= -zloadfltr 643ZMULDEFS= -zmuldefs 644ZNODEFAULTLIB= -znodefaultlib 645ZNODEFS= -znodefs 646ZNODELETE= -znodelete 647ZNODLOPEN= -znodlopen 648ZNODUMP= -znodump 649ZNOLAZYLOAD= -znolazyload 650ZNOVERSION= -znoversion 651ZREDLOCSYM= -zredlocsym 652ZTEXT= -ztext 653 654GSHARED= -G 655CCMT= -mt 656 657# Handle different PIC models on different ISAs 658# (May be overridden by lower-level Makefiles) 659 660sparc_C_PICFLAGS = -K pic 661sparcv9_C_PICFLAGS = -K pic 662i386_C_PICFLAGS = -K pic 663amd64_C_PICFLAGS = -K pic 664C_PICFLAGS = $($(MACH)_C_PICFLAGS) 665C_PICFLAGS64 = $($(MACH64)_C_PICFLAGS) 666 667sparc_C_BIGPICFLAGS = -K PIC 668sparcv9_C_BIGPICFLAGS = -K PIC 669i386_C_BIGPICFLAGS = -K PIC 670amd64_C_BIGPICFLAGS = -K PIC 671C_BIGPICFLAGS = $($(MACH)_C_BIGPICFLAGS) 672C_BIGPICFLAGS64 = $($(MACH64)_C_BIGPICFLAGS) 673 674# CC requires there to be no space between '-K' and 'pic' or 'PIC'. 675sparc_CC_PICFLAGS = -Kpic 676sparcv9_CC_PICFLAGS = -KPIC 677i386_CC_PICFLAGS = -Kpic 678amd64_CC_PICFLAGS = -Kpic 679CC_PICFLAGS = $($(MACH)_CC_PICFLAGS) 680CC_PICFLAGS64 = $($(MACH64)_CC_PICFLAGS) 681 682AS_PICFLAGS= $(C_PICFLAGS) 683AS_BIGPICFLAGS= $(C_BIGPICFLAGS) 684 685# 686# Default label for CTF sections 687# 688CTFCVTFLAGS= -i -L VERSION 689 690# 691# Override to pass module-specific flags to ctfmerge. Currently used 692# only by krtld to turn on fuzzy matching. 693# 694CTFMRGFLAGS= 695 696CTFCONVERT_O = $(CTFCONVERT) $(CTFCVTFLAGS) $@ 697 698ELFSIGN_O= $(TRUE) 699ELFSIGN_CRYPTO= $(ELFSIGN_O) 700ELFSIGN_OBJECT= $(ELFSIGN_O) 701# EXPORT DELETE START 702# Note: The setting of ELFSIGN_O, etc. to $(TRUE) above must stay outside 703# of the export src markers. The real setting for non source product builds 704# is inside the markers. 705# This is needed to reduce the amount of changes to Makefiles elsewhere 706# in the source tree (particularly in uts/{sparc,intel}) 707ELFSIGN_O = $(ELFSIGN) 708ELFSIGN_KEY = $(SRC)/cmd/cmd-crypto/etc/keys/SUNWosnet 709ELFSIGN_CERT= $(SRC)/cmd/cmd-crypto/etc/certs/SUNWosnet 710ELFSIGN_SEKEY = $(SRC)/cmd/cmd-crypto/etc/keys/SUNWosnetSolaris 711ELFSIGN_SECERT= $(SRC)/cmd/cmd-crypto/etc/certs/SUNWosnetSolaris 712ELFSIGN_CRYPTO= $(ELFSIGN_O) sign $(ELFSIGN_FORMAT_OPTION) \ 713 -k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@ 714ELFSIGN_OBJECT= $(ELFSIGN_O) sign $(ELFSIGN_FORMAT_OPTION) \ 715 -k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@ 716# EXPORT DELETE END 717 718# Rules (normally from make.rules) and macros which are used for post 719# processing files. Normally, these do stripping of the comment section 720# automatically. 721# RELEASE_CM: Should be editted to reflect the release. 722# POST_PROCESS_O: Post-processing for `.o' files. 723# POST_PROCESS_A: Post-processing for `.a' files (currently null). 724# POST_PROCESS_SO: Post-processing for `.so' files. 725# POST_PROCESS: Post-processing for executable files (no suffix). 726# Note that these macros are not completely generalized as they are to be 727# used with the file name to be processed following. 728# 729# It is left as an exercise to Release Engineering to embellish the generation 730# of the release comment string. 731# 732# If this is a standard development build: 733# compress the comment section (mcs -c) 734# add the standard comment (mcs -a $(RELEASE_CM)) 735# add the development specific comment (mcs -a $(DEV_CM)) 736# 737# If this is an installation build: 738# delete the comment section (mcs -d) 739# add the standard comment (mcs -a $(RELEASE_CM)) 740# add the development specific comment (mcs -a $(DEV_CM)) 741# 742# If this is an release build: 743# delete the comment section (mcs -d) 744# add the standard comment (mcs -a $(RELEASE_CM)) 745# 746# The ONVERS macro sets the default value for the VERSION string 747# within pkginfo. 748# 749# The following list of macros are used in the definition of RELEASE_CM 750# which is used to label all binaries in the build: 751# 752# RELEASE Specific release of the build, eg: 5.2 753# VERSION Version of the build (alpha, beta, Generic) 754# PATCHID If this is a patch this value should contain 755# the patchid value (eg: "Generic 100832-01"), otherwise 756# it will be set to $(VERSION) 757# RELEASE_DATE Date of the Release Build 758# PATCH_DATE Date the patch was created, if this is blank it 759# will default to the RELEASE_DATE 760# 761ONVERS= "11.11" 762RELEASE= 5.11 763VERSION= SunOS Development 764PATCHID= $(VERSION) 765RELEASE_DATE= October 2007 766PATCH_DATE= $(RELEASE_DATE) 767RELEASE_CM= "@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)" 768DEV_CM= "@($(POUND_SIGN))SunOS Internal Development: \ 769`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`" 770 771PROCESS_COMMENT= @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM) 772$(STRIP_COMMENTS)PROCESS_COMMENT= @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM) 773$(RELEASE_BUILD)PROCESS_COMMENT= @?${MCS} -d -a $(RELEASE_CM) 774 775STRIP_STABS= : 776$(RELEASE_BUILD)STRIP_STABS= $(STRIP) -x $@ 777 778POST_PROCESS_O= $(PROCESS_COMMENT) $@ 779POST_PROCESS_A= 780POST_PROCESS_SO= $(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \ 781 $(ELFSIGN_OBJECT) 782POST_PROCESS= $(PROCESS_COMMENT) $@ ; $(ELFSIGN_OBJECT) 783 784# 785# The PKGDEFS macro points to the source directory containing the majority 786# of ON's package definitions plus Makefiles with general package creation 787# rules. 788# 789# PKGARCHIVE specifies the default location where packages should be 790# placed if built. 791# 792PKGDEFS=$(SRC)/pkgdefs 793$(RELEASE_BUILD)PKGARCHIVESUFFIX= -nd 794PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX) 795 796# Default build rules which perform comment section post-processing. 797# 798.c: 799 $(LINK.c) -o $@ $< $(LDLIBS) 800 $(POST_PROCESS) 801.c.o: 802 $(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK) 803 $(POST_PROCESS_O) 804.c.a: 805 $(COMPILE.c) -o $% $< 806 $(PROCESS_COMMENT) $% 807 $(AR) $(ARFLAGS) $@ $% 808 $(RM) $% 809.s.o: 810 $(COMPILE.s) -o $@ $< 811 $(POST_PROCESS_O) 812.s.a: 813 $(COMPILE.s) -o $% $< 814 $(PROCESS_COMMENT) $% 815 $(AR) $(ARFLAGS) $@ $% 816 $(RM) $% 817.cc: 818 $(LINK.cc) -o $@ $< $(LDLIBS) 819 $(POST_PROCESS) 820.cc.o: 821 $(COMPILE.cc) $(OUTPUT_OPTION) $< 822 $(POST_PROCESS_O) 823.cc.a: 824 $(COMPILE.cc) -o $% $< 825 $(AR) $(ARFLAGS) $@ $% 826 $(PROCESS_COMMENT) $% 827 $(RM) $% 828.y: 829 $(YACC.y) $< 830 $(LINK.c) -o $@ y.tab.c $(LDLIBS) 831 $(POST_PROCESS) 832 $(RM) y.tab.c 833.y.o: 834 $(YACC.y) $< 835 $(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK) 836 $(POST_PROCESS_O) 837 $(RM) y.tab.c 838.l: 839 $(RM) $*.c 840 $(LEX.l) $< > $*.c 841 $(LINK.c) -o $@ $*.c -ll $(LDLIBS) 842 $(POST_PROCESS) 843 $(RM) $*.c 844.l.o: 845 $(RM) $*.c 846 $(LEX.l) $< > $*.c 847 $(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK) 848 $(POST_PROCESS_O) 849 $(RM) $*.c 850 851.java.class: 852 $(COMPILE.java) $< 853 854# 855# Rules to create message catalogue files from .sh, .c, .y, and .l files. 856# For .sh files, we extract all gettext strings with sed(1) (being careful 857# to permit multiple gettext strings on the same line), weed out the dups, 858# and build the catalogue with awk(1). 859# 860 861.sh.po: 862 $(SED) -n -e ":a" \ 863 -e "h" \ 864 -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p" \ 865 -e "x" \ 866 -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/" \ 867 -e "t a" \ 868 $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@ 869 870# 871# When using xgettext, we want messages to go to the default domain, 872# rather than the specified one. This special version of the 873# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN, 874# causing xgettext to put all messages into the default domain. 875# 876CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN) 877 878.c.i: 879 $(CPPFORPO) $< > $@ 880 881.h.i: 882 $(CPPFORPO) $< > $@ 883 884.y.i: 885 $(YACC) -d $< 886 $(CPPFORPO) y.tab.c > $@ 887 $(RM) y.tab.c 888 889.l.i: 890 $(LEX) $< 891 $(CPPFORPO) lex.yy.c > $@ 892 $(RM) lex.yy.c 893 894.c.po: 895 $(CPPFORPO) $< > $<.i 896 $(BUILD.po) 897 898.y.po: 899 $(YACC) -d $< 900 $(CPPFORPO) y.tab.c > $<.i 901 $(BUILD.po) 902 $(RM) y.tab.c 903 904.l.po: 905 $(LEX) $< 906 $(CPPFORPO) lex.yy.c > $<.i 907 $(BUILD.po) 908 $(RM) lex.yy.c 909 910# 911# Rules to perform stylistic checks 912# 913.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk 914 915.h.check: 916 $(DOT_H_CHECK) 917 918.x.check: 919 $(DOT_X_CHECK) 920 921.xml.xmlchk: 922 $(MANIFEST_CHECK) 923 924# 925# Rules to process ONC+ Source partial files 926# 927%_onc_plus: % 928 @$(ECHO) "extracting code from $< ... " 929 sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $< > $@ 930