1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2010 Weongyo Jeong <weongyo@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 18 * NO WARRANTY 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 22 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 23 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 24 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 27 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29 * THE POSSIBILITY OF SUCH DAMAGES. 30 * 31 * $FreeBSD$ 32 */ 33 34 #include <sys/param.h> 35 #include <sys/endian.h> 36 #include <sys/ioctl.h> 37 #include <sys/socket.h> 38 #include <sys/stat.h> 39 #include <sys/sysctl.h> 40 #include <sys/utsname.h> 41 #include <sys/queue.h> 42 #include <net/if.h> 43 #include <net/bpf.h> 44 #include <dev/usb/usb.h> 45 #include <dev/usb/usb_pf.h> 46 #include <dev/usb/usbdi.h> 47 #include <errno.h> 48 #include <fcntl.h> 49 #include <limits.h> 50 #include <stdio.h> 51 #include <stdlib.h> 52 #include <stdint.h> 53 #include <string.h> 54 #include <time.h> 55 #include <unistd.h> 56 #include <sysexits.h> 57 #include <err.h> 58 59 #define BPF_STORE_JUMP(x,_c,_k,_jt,_jf) do { \ 60 (x).code = (_c); \ 61 (x).k = (_k); \ 62 (x).jt = (_jt); \ 63 (x).jf = (_jf); \ 64 } while (0) 65 66 #define BPF_STORE_STMT(x,_c,_k) do { \ 67 (x).code = (_c); \ 68 (x).k = (_k); \ 69 (x).jt = 0; \ 70 (x).jf = 0; \ 71 } while (0) 72 73 struct usb_filt { 74 STAILQ_ENTRY(usb_filt) entry; 75 int unit; 76 int endpoint; 77 }; 78 79 struct usbcap { 80 int fd; /* fd for /dev/usbpf */ 81 uint32_t bufsize; 82 uint8_t *buffer; 83 84 /* for -w option */ 85 int wfd; 86 /* for -r option */ 87 int rfd; 88 /* for -b option */ 89 int bfd; 90 }; 91 92 struct usbcap_filehdr { 93 uint32_t magic; 94 #define USBCAP_FILEHDR_MAGIC 0x9a90000e 95 uint8_t major; 96 uint8_t minor; 97 uint8_t reserved[26]; 98 } __packed; 99 100 struct header_32 { 101 /* capture timestamp */ 102 uint32_t ts_sec; 103 uint32_t ts_usec; 104 /* data length and alignment information */ 105 uint32_t caplen; 106 uint32_t datalen; 107 uint8_t hdrlen; 108 uint8_t align; 109 } __packed; 110 111 static int doexit; 112 static int pkt_captured; 113 static int verbose; 114 static int uf_minor; 115 static char *i_arg; 116 static char *r_arg; 117 static char *w_arg; 118 static char *b_arg; 119 static struct usbcap uc; 120 static const char *errstr_table[USB_ERR_MAX] = { 121 [USB_ERR_NORMAL_COMPLETION] = "0", 122 [USB_ERR_PENDING_REQUESTS] = "PENDING_REQUESTS", 123 [USB_ERR_NOT_STARTED] = "NOT_STARTED", 124 [USB_ERR_INVAL] = "INVAL", 125 [USB_ERR_NOMEM] = "NOMEM", 126 [USB_ERR_CANCELLED] = "CANCELLED", 127 [USB_ERR_BAD_ADDRESS] = "BAD_ADDRESS", 128 [USB_ERR_BAD_BUFSIZE] = "BAD_BUFSIZE", 129 [USB_ERR_BAD_FLAG] = "BAD_FLAG", 130 [USB_ERR_NO_CALLBACK] = "NO_CALLBACK", 131 [USB_ERR_IN_USE] = "IN_USE", 132 [USB_ERR_NO_ADDR] = "NO_ADDR", 133 [USB_ERR_NO_PIPE] = "NO_PIPE", 134 [USB_ERR_ZERO_NFRAMES] = "ZERO_NFRAMES", 135 [USB_ERR_ZERO_MAXP] = "ZERO_MAXP", 136 [USB_ERR_SET_ADDR_FAILED] = "SET_ADDR_FAILED", 137 [USB_ERR_NO_POWER] = "NO_POWER", 138 [USB_ERR_TOO_DEEP] = "TOO_DEEP", 139 [USB_ERR_IOERROR] = "IOERROR", 140 [USB_ERR_NOT_CONFIGURED] = "NOT_CONFIGURED", 141 [USB_ERR_TIMEOUT] = "TIMEOUT", 142 [USB_ERR_SHORT_XFER] = "SHORT_XFER", 143 [USB_ERR_STALLED] = "STALLED", 144 [USB_ERR_INTERRUPTED] = "INTERRUPTED", 145 [USB_ERR_DMA_LOAD_FAILED] = "DMA_LOAD_FAILED", 146 [USB_ERR_BAD_CONTEXT] = "BAD_CONTEXT", 147 [USB_ERR_NO_ROOT_HUB] = "NO_ROOT_HUB", 148 [USB_ERR_NO_INTR_THREAD] = "NO_INTR_THREAD", 149 [USB_ERR_NOT_LOCKED] = "NOT_LOCKED", 150 }; 151 152 #define USB_XFERTYPE_MAX 4 153 154 static const char *xfertype_table[USB_XFERTYPE_MAX] = { 155 [UE_CONTROL] = "CTRL", 156 [UE_ISOCHRONOUS] = "ISOC", 157 [UE_BULK] = "BULK", 158 [UE_INTERRUPT] = "INTR" 159 }; 160 161 static const char *speed_table[USB_SPEED_MAX] = { 162 [USB_SPEED_FULL] = "FULL", 163 [USB_SPEED_HIGH] = "HIGH", 164 [USB_SPEED_LOW] = "LOW", 165 [USB_SPEED_VARIABLE] = "VARI", 166 [USB_SPEED_SUPER] = "SUPER", 167 }; 168 169 static STAILQ_HEAD(,usb_filt) usb_filt_head = 170 STAILQ_HEAD_INITIALIZER(usb_filt_head); 171 172 static void 173 add_filter(int usb_filt_unit, int usb_filt_ep) 174 { 175 struct usb_filt *puf; 176 177 puf = malloc(sizeof(struct usb_filt)); 178 if (puf == NULL) 179 errx(EX_SOFTWARE, "Out of memory."); 180 181 puf->unit = usb_filt_unit; 182 puf->endpoint = usb_filt_ep; 183 184 STAILQ_INSERT_TAIL(&usb_filt_head, puf, entry); 185 } 186 187 static void 188 make_filter(struct bpf_program *pprog, int snapshot) 189 { 190 struct usb_filt *puf; 191 struct bpf_insn *dynamic_insn; 192 int len; 193 194 len = 0; 195 196 STAILQ_FOREACH(puf, &usb_filt_head, entry) 197 len++; 198 199 dynamic_insn = malloc(((len * 5) + 1) * sizeof(struct bpf_insn)); 200 201 if (dynamic_insn == NULL) 202 errx(EX_SOFTWARE, "Out of memory."); 203 204 len++; 205 206 if (len == 1) { 207 /* accept all packets */ 208 209 BPF_STORE_STMT(dynamic_insn[0], BPF_RET | BPF_K, snapshot); 210 211 goto done; 212 } 213 214 len = 0; 215 216 STAILQ_FOREACH(puf, &usb_filt_head, entry) { 217 const int addr_off = (uintptr_t)&((struct usbpf_pkthdr *)0)->up_address; 218 const int addr_ep = (uintptr_t)&((struct usbpf_pkthdr *)0)->up_endpoint; 219 220 if (puf->unit != -1) { 221 if (puf->endpoint != -1) { 222 BPF_STORE_STMT(dynamic_insn[len], 223 BPF_LD | BPF_B | BPF_ABS, addr_off); 224 len++; 225 BPF_STORE_JUMP(dynamic_insn[len], 226 BPF_JMP | BPF_JEQ | BPF_K, (uint8_t)puf->unit, 0, 3); 227 len++; 228 BPF_STORE_STMT(dynamic_insn[len], 229 BPF_LD | BPF_W | BPF_ABS, addr_ep); 230 len++; 231 BPF_STORE_JUMP(dynamic_insn[len], 232 BPF_JMP | BPF_JEQ | BPF_K, htobe32(puf->endpoint), 0, 1); 233 len++; 234 } else { 235 BPF_STORE_STMT(dynamic_insn[len], 236 BPF_LD | BPF_B | BPF_ABS, addr_off); 237 len++; 238 BPF_STORE_JUMP(dynamic_insn[len], 239 BPF_JMP | BPF_JEQ | BPF_K, (uint8_t)puf->unit, 0, 1); 240 len++; 241 } 242 } else { 243 if (puf->endpoint != -1) { 244 BPF_STORE_STMT(dynamic_insn[len], 245 BPF_LD | BPF_W | BPF_ABS, addr_ep); 246 len++; 247 BPF_STORE_JUMP(dynamic_insn[len], 248 BPF_JMP | BPF_JEQ | BPF_K, htobe32(puf->endpoint), 0, 1); 249 len++; 250 } 251 } 252 BPF_STORE_STMT(dynamic_insn[len], 253 BPF_RET | BPF_K, snapshot); 254 len++; 255 } 256 257 BPF_STORE_STMT(dynamic_insn[len], BPF_RET | BPF_K, 0); 258 len++; 259 260 done: 261 pprog->bf_len = len; 262 pprog->bf_insns = dynamic_insn; 263 } 264 265 static int 266 match_filter(int unit, int endpoint) 267 { 268 struct usb_filt *puf; 269 270 if (STAILQ_FIRST(&usb_filt_head) == NULL) 271 return (1); 272 273 STAILQ_FOREACH(puf, &usb_filt_head, entry) { 274 if ((puf->unit == -1 || puf->unit == unit) && 275 (puf->endpoint == -1 || puf->endpoint == endpoint)) 276 return (1); 277 } 278 return (0); 279 } 280 281 static void 282 free_filter(struct bpf_program *pprog) 283 { 284 struct usb_filt *puf; 285 286 while ((puf = STAILQ_FIRST(&usb_filt_head)) != NULL) { 287 STAILQ_REMOVE_HEAD(&usb_filt_head, entry); 288 free(puf); 289 } 290 free(pprog->bf_insns); 291 } 292 293 static void 294 handle_sigint(int sig) 295 { 296 297 (void)sig; 298 doexit = 1; 299 } 300 301 #define FLAGS(x, name) \ 302 (((x) & USBPF_FLAG_##name) ? #name "|" : "") 303 304 #define STATUS(x, name) \ 305 (((x) & USBPF_STATUS_##name) ? #name "|" : "") 306 307 static const char * 308 usb_errstr(uint32_t error) 309 { 310 if (error >= USB_ERR_MAX || errstr_table[error] == NULL) 311 return ("UNKNOWN"); 312 else 313 return (errstr_table[error]); 314 } 315 316 static const char * 317 usb_speedstr(uint8_t speed) 318 { 319 if (speed >= USB_SPEED_MAX || speed_table[speed] == NULL) 320 return ("UNKNOWN"); 321 else 322 return (speed_table[speed]); 323 } 324 325 static const char * 326 usb_xferstr(uint8_t type) 327 { 328 if (type >= USB_XFERTYPE_MAX || xfertype_table[type] == NULL) 329 return ("UNKN"); 330 else 331 return (xfertype_table[type]); 332 } 333 334 static void 335 print_flags(uint32_t flags) 336 { 337 printf(" flags %#x <%s%s%s%s%s%s%s%s%s0>\n", 338 flags, 339 FLAGS(flags, FORCE_SHORT_XFER), 340 FLAGS(flags, SHORT_XFER_OK), 341 FLAGS(flags, SHORT_FRAMES_OK), 342 FLAGS(flags, PIPE_BOF), 343 FLAGS(flags, PROXY_BUFFER), 344 FLAGS(flags, EXT_BUFFER), 345 FLAGS(flags, MANUAL_STATUS), 346 FLAGS(flags, NO_PIPE_OK), 347 FLAGS(flags, STALL_PIPE)); 348 } 349 350 static void 351 print_status(uint32_t status) 352 { 353 printf(" status %#x <%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s0>\n", 354 status, 355 STATUS(status, OPEN), 356 STATUS(status, TRANSFERRING), 357 STATUS(status, DID_DMA_DELAY), 358 STATUS(status, DID_CLOSE), 359 STATUS(status, DRAINING), 360 STATUS(status, STARTED), 361 STATUS(status, BW_RECLAIMED), 362 STATUS(status, CONTROL_XFR), 363 STATUS(status, CONTROL_HDR), 364 STATUS(status, CONTROL_ACT), 365 STATUS(status, CONTROL_STALL), 366 STATUS(status, SHORT_FRAMES_OK), 367 STATUS(status, SHORT_XFER_OK), 368 STATUS(status, BDMA_ENABLE), 369 STATUS(status, BDMA_NO_POST_SYNC), 370 STATUS(status, BDMA_SETUP), 371 STATUS(status, ISOCHRONOUS_XFR), 372 STATUS(status, CURR_DMA_SET), 373 STATUS(status, CAN_CANCEL_IMMED), 374 STATUS(status, DOING_CALLBACK)); 375 } 376 377 /* 378 * Dump a byte into hex format. 379 */ 380 static void 381 hexbyte(char *buf, uint8_t temp) 382 { 383 uint8_t lo; 384 uint8_t hi; 385 386 lo = temp & 0xF; 387 hi = temp >> 4; 388 389 if (hi < 10) 390 buf[0] = '0' + hi; 391 else 392 buf[0] = 'A' + hi - 10; 393 394 if (lo < 10) 395 buf[1] = '0' + lo; 396 else 397 buf[1] = 'A' + lo - 10; 398 } 399 400 /* 401 * Display a region in traditional hexdump format. 402 */ 403 static void 404 hexdump(const uint8_t *region, uint32_t len) 405 { 406 const uint8_t *line; 407 char linebuf[128]; 408 int i; 409 int x; 410 int c; 411 412 for (line = region; line < (region + len); line += 16) { 413 414 i = 0; 415 416 linebuf[i] = ' '; 417 hexbyte(linebuf + i + 1, ((line - region) >> 8) & 0xFF); 418 hexbyte(linebuf + i + 3, (line - region) & 0xFF); 419 linebuf[i + 5] = ' '; 420 linebuf[i + 6] = ' '; 421 i += 7; 422 423 for (x = 0; x < 16; x++) { 424 if ((line + x) < (region + len)) { 425 hexbyte(linebuf + i, 426 *(const u_int8_t *)(line + x)); 427 } else { 428 linebuf[i] = '-'; 429 linebuf[i + 1] = '-'; 430 } 431 linebuf[i + 2] = ' '; 432 if (x == 7) { 433 linebuf[i + 3] = ' '; 434 i += 4; 435 } else { 436 i += 3; 437 } 438 } 439 linebuf[i] = ' '; 440 linebuf[i + 1] = '|'; 441 i += 2; 442 for (x = 0; x < 16; x++) { 443 if ((line + x) < (region + len)) { 444 c = *(const u_int8_t *)(line + x); 445 /* !isprint(c) */ 446 if ((c < ' ') || (c > '~')) 447 c = '.'; 448 linebuf[i] = c; 449 } else { 450 linebuf[i] = ' '; 451 } 452 i++; 453 } 454 linebuf[i] = '|'; 455 linebuf[i + 1] = 0; 456 i += 2; 457 puts(linebuf); 458 } 459 } 460 461 static void 462 print_apacket(const struct header_32 *hdr, const uint8_t *ptr, int ptr_len) 463 { 464 struct tm *tm; 465 struct usbpf_pkthdr up_temp; 466 struct usbpf_pkthdr *up; 467 struct timeval tv; 468 size_t len; 469 uint32_t x; 470 char buf[64]; 471 472 ptr += USBPF_HDR_LEN; 473 ptr_len -= USBPF_HDR_LEN; 474 if (ptr_len < 0) 475 return; 476 477 /* make sure we don't change the source buffer */ 478 memcpy(&up_temp, ptr - USBPF_HDR_LEN, sizeof(up_temp)); 479 up = &up_temp; 480 481 /* 482 * A packet from the kernel is based on little endian byte 483 * order. 484 */ 485 up->up_totlen = le32toh(up->up_totlen); 486 up->up_busunit = le32toh(up->up_busunit); 487 up->up_flags = le32toh(up->up_flags); 488 up->up_status = le32toh(up->up_status); 489 up->up_error = le32toh(up->up_error); 490 up->up_interval = le32toh(up->up_interval); 491 up->up_frames = le32toh(up->up_frames); 492 up->up_packet_size = le32toh(up->up_packet_size); 493 up->up_packet_count = le32toh(up->up_packet_count); 494 up->up_endpoint = le32toh(up->up_endpoint); 495 496 if (!match_filter(up->up_address, up->up_endpoint)) 497 return; 498 499 tv.tv_sec = hdr->ts_sec; 500 tv.tv_usec = hdr->ts_usec; 501 tm = localtime(&tv.tv_sec); 502 503 len = strftime(buf, sizeof(buf), "%H:%M:%S", tm); 504 505 if (verbose >= 0) { 506 printf("%.*s.%06ld usbus%d.%d %s-%s-EP=%08x,SPD=%s,NFR=%d,SLEN=%d,IVAL=%d%s%s\n", 507 (int)len, buf, tv.tv_usec, 508 (int)up->up_busunit, (int)up->up_address, 509 (up->up_type == USBPF_XFERTAP_SUBMIT) ? "SUBM" : "DONE", 510 usb_xferstr(up->up_xfertype), 511 (unsigned int)up->up_endpoint, 512 usb_speedstr(up->up_speed), 513 (int)up->up_frames, 514 (int)(up->up_totlen - USBPF_HDR_LEN - 515 (USBPF_FRAME_HDR_LEN * up->up_frames)), 516 (int)up->up_interval, 517 (up->up_type == USBPF_XFERTAP_DONE) ? ",ERR=" : "", 518 (up->up_type == USBPF_XFERTAP_DONE) ? 519 usb_errstr(up->up_error) : ""); 520 } 521 522 if (verbose >= 1 || b_arg != NULL) { 523 for (x = 0; x != up->up_frames; x++) { 524 const struct usbpf_framehdr *uf; 525 uint32_t framelen; 526 uint32_t flags; 527 528 uf = (const struct usbpf_framehdr *)ptr; 529 ptr += USBPF_FRAME_HDR_LEN; 530 ptr_len -= USBPF_FRAME_HDR_LEN; 531 if (ptr_len < 0) 532 return; 533 534 framelen = le32toh(uf->length); 535 flags = le32toh(uf->flags); 536 537 if (verbose >= 1) { 538 printf(" frame[%u] %s %d bytes\n", 539 (unsigned int)x, 540 (flags & USBPF_FRAMEFLAG_READ) ? "READ" : "WRITE", 541 (int)framelen); 542 } 543 544 if (flags & USBPF_FRAMEFLAG_DATA_FOLLOWS) { 545 546 int tot_frame_len; 547 548 tot_frame_len = USBPF_FRAME_ALIGN(framelen); 549 550 ptr_len -= tot_frame_len; 551 552 if (tot_frame_len < 0 || 553 (int)framelen < 0 || (int)ptr_len < 0) 554 break; 555 556 if (b_arg != NULL) { 557 struct usbcap *p = &uc; 558 int ret; 559 ret = write(p->bfd, ptr, framelen); 560 if (ret != (int)framelen) 561 err(EXIT_FAILURE, "Could not write binary data"); 562 } 563 if (verbose >= 1) 564 hexdump(ptr, framelen); 565 566 ptr += tot_frame_len; 567 } 568 } 569 } 570 if (verbose >= 2) 571 print_flags(up->up_flags); 572 if (verbose >= 3) 573 print_status(up->up_status); 574 } 575 576 static void 577 fix_packets(uint8_t *data, const int datalen) 578 { 579 struct header_32 temp; 580 uint8_t *ptr; 581 uint8_t *next; 582 uint32_t hdrlen; 583 uint32_t caplen; 584 585 for (ptr = data; ptr < (data + datalen); ptr = next) { 586 587 const struct bpf_hdr *hdr; 588 589 hdr = (const struct bpf_hdr *)ptr; 590 591 temp.ts_sec = htole32(hdr->bh_tstamp.tv_sec); 592 temp.ts_usec = htole32(hdr->bh_tstamp.tv_usec); 593 temp.caplen = htole32(hdr->bh_caplen); 594 temp.datalen = htole32(hdr->bh_datalen); 595 temp.hdrlen = hdr->bh_hdrlen; 596 temp.align = BPF_WORDALIGN(1); 597 598 hdrlen = hdr->bh_hdrlen; 599 caplen = hdr->bh_caplen; 600 601 if ((hdrlen >= sizeof(temp)) && (hdrlen <= 255) && 602 ((ptr + hdrlen) <= (data + datalen))) { 603 memcpy(ptr, &temp, sizeof(temp)); 604 memset(ptr + sizeof(temp), 0, hdrlen - sizeof(temp)); 605 } else { 606 err(EXIT_FAILURE, "Invalid header length %d", hdrlen); 607 } 608 609 next = ptr + BPF_WORDALIGN(hdrlen + caplen); 610 611 if (next <= ptr) 612 err(EXIT_FAILURE, "Invalid length"); 613 } 614 } 615 616 static void 617 print_packets(uint8_t *data, const int datalen) 618 { 619 struct header_32 temp; 620 uint8_t *ptr; 621 uint8_t *next; 622 623 for (ptr = data; ptr < (data + datalen); ptr = next) { 624 625 const struct header_32 *hdr32; 626 627 hdr32 = (const struct header_32 *)ptr; 628 629 temp.ts_sec = le32toh(hdr32->ts_sec); 630 temp.ts_usec = le32toh(hdr32->ts_usec); 631 temp.caplen = le32toh(hdr32->caplen); 632 temp.datalen = le32toh(hdr32->datalen); 633 temp.hdrlen = hdr32->hdrlen; 634 temp.align = hdr32->align; 635 636 next = ptr + roundup2(temp.hdrlen + temp.caplen, temp.align); 637 638 if (next <= ptr) 639 err(EXIT_FAILURE, "Invalid length"); 640 641 if (verbose >= 0 || r_arg != NULL || b_arg != NULL) { 642 print_apacket(&temp, ptr + 643 temp.hdrlen, temp.caplen); 644 } 645 pkt_captured++; 646 } 647 } 648 649 static void 650 write_packets(struct usbcap *p, const uint8_t *data, const int datalen) 651 { 652 int len = htole32(datalen); 653 int ret; 654 655 ret = write(p->wfd, &len, sizeof(int)); 656 if (ret != sizeof(int)) { 657 err(EXIT_FAILURE, "Could not write length " 658 "field of USB data payload"); 659 } 660 ret = write(p->wfd, data, datalen); 661 if (ret != datalen) { 662 err(EXIT_FAILURE, "Could not write " 663 "complete USB data payload"); 664 } 665 } 666 667 static void 668 read_file(struct usbcap *p) 669 { 670 int datalen; 671 int ret; 672 uint8_t *data; 673 674 while ((ret = read(p->rfd, &datalen, sizeof(int))) == sizeof(int)) { 675 datalen = le32toh(datalen); 676 data = malloc(datalen); 677 if (data == NULL) 678 errx(EX_SOFTWARE, "Out of memory."); 679 ret = read(p->rfd, data, datalen); 680 if (ret != datalen) { 681 err(EXIT_FAILURE, "Could not read complete " 682 "USB data payload"); 683 } 684 if (uf_minor == 2) 685 fix_packets(data, datalen); 686 687 print_packets(data, datalen); 688 free(data); 689 } 690 } 691 692 static void 693 do_loop(struct usbcap *p) 694 { 695 int cc; 696 697 while (doexit == 0) { 698 cc = read(p->fd, (uint8_t *)p->buffer, p->bufsize); 699 if (cc < 0) { 700 switch (errno) { 701 case EINTR: 702 break; 703 default: 704 fprintf(stderr, "read: %s\n", strerror(errno)); 705 return; 706 } 707 continue; 708 } 709 if (cc == 0) 710 continue; 711 712 fix_packets(p->buffer, cc); 713 714 if (w_arg != NULL) 715 write_packets(p, p->buffer, cc); 716 print_packets(p->buffer, cc); 717 } 718 } 719 720 static void 721 init_rfile(struct usbcap *p) 722 { 723 struct usbcap_filehdr uf; 724 int ret; 725 726 p->rfd = open(r_arg, O_RDONLY); 727 if (p->rfd < 0) { 728 err(EXIT_FAILURE, "Could not open " 729 "'%s' for read", r_arg); 730 } 731 ret = read(p->rfd, &uf, sizeof(uf)); 732 if (ret != sizeof(uf)) { 733 err(EXIT_FAILURE, "Could not read USB capture " 734 "file header"); 735 } 736 if (le32toh(uf.magic) != USBCAP_FILEHDR_MAGIC) { 737 errx(EX_SOFTWARE, "Invalid magic field(0x%08x) " 738 "in USB capture file header.", 739 (unsigned int)le32toh(uf.magic)); 740 } 741 if (uf.major != 0) { 742 errx(EX_SOFTWARE, "Invalid major version(%d) " 743 "field in USB capture file header.", (int)uf.major); 744 } 745 746 uf_minor = uf.minor; 747 748 if (uf.minor != 3 && uf.minor != 2) { 749 errx(EX_SOFTWARE, "Invalid minor version(%d) " 750 "field in USB capture file header.", (int)uf.minor); 751 } 752 } 753 754 static void 755 init_wfile(struct usbcap *p) 756 { 757 struct usbcap_filehdr uf; 758 int ret; 759 760 p->wfd = open(w_arg, O_CREAT | O_TRUNC | O_WRONLY, S_IRUSR | S_IWUSR); 761 if (p->wfd < 0) { 762 err(EXIT_FAILURE, "Could not open " 763 "'%s' for write", w_arg); 764 } 765 memset(&uf, 0, sizeof(uf)); 766 uf.magic = htole32(USBCAP_FILEHDR_MAGIC); 767 uf.major = 0; 768 uf.minor = 3; 769 ret = write(p->wfd, (const void *)&uf, sizeof(uf)); 770 if (ret != sizeof(uf)) { 771 err(EXIT_FAILURE, "Could not write " 772 "USB capture header"); 773 } 774 } 775 776 static void 777 usage(void) 778 { 779 780 #define FMT " %-14s %s\n" 781 fprintf(stderr, "usage: usbdump [options]\n"); 782 fprintf(stderr, FMT, "-d [ugen]B", "Listen on bus, B"); 783 fprintf(stderr, FMT, "-d [ugen]B.D", "Listen on bus, B and device, D"); 784 fprintf(stderr, FMT, "-d [ugen]B.D.E", "Listen on bus, B, device, D, and endpoint E"); 785 fprintf(stderr, FMT, "-i <usbusX>", "Listen on this bus interface"); 786 fprintf(stderr, FMT, "-f <unit[.endpoint]>", "Specify a device and endpoint filter"); 787 fprintf(stderr, FMT, "-r <file>", "Read the raw packets from file"); 788 fprintf(stderr, FMT, "-s <snaplen>", "Snapshot bytes from each packet"); 789 fprintf(stderr, FMT, "-v", "Increase the verbose level"); 790 fprintf(stderr, FMT, "-b <file>", "Save raw version of all recorded data to file"); 791 fprintf(stderr, FMT, "-w <file>", "Write the raw packets to file"); 792 fprintf(stderr, FMT, "-h", "Display summary of command line options"); 793 #undef FMT 794 exit(EX_USAGE); 795 } 796 797 static void 798 check_usb_pf_sysctl(void) 799 { 800 int error; 801 int no_pf_val = 0; 802 size_t no_pf_len = sizeof(int); 803 804 /* check "hw.usb.no_pf" sysctl for 8- and 9- stable */ 805 806 error = sysctlbyname("hw.usb.no_pf", &no_pf_val, 807 &no_pf_len, NULL, 0); 808 if (error == 0 && no_pf_val != 0) { 809 warnx("The USB packet filter might be disabled."); 810 warnx("See the \"hw.usb.no_pf\" sysctl for more information."); 811 } 812 } 813 814 int 815 main(int argc, char *argv[]) 816 { 817 struct timeval tv; 818 struct bpf_program total_prog; 819 struct bpf_stat us; 820 struct bpf_version bv; 821 struct usbcap *p = &uc; 822 struct ifreq ifr; 823 long snapshot = 192; 824 uint32_t v; 825 int fd; 826 int o; 827 int filt_unit; 828 int filt_ep; 829 int s; 830 int ifindex; 831 const char *optstring; 832 char *pp; 833 834 optstring = "b:d:hi:r:s:vw:f:"; 835 while ((o = getopt(argc, argv, optstring)) != -1) { 836 switch (o) { 837 case 'd': 838 pp = optarg; 839 if (pp[0] == 'u' && pp[1] == 'g' && pp[2] == 'e' && pp[3] == 'n') 840 pp += 4; 841 ifindex = strtol(pp, &pp, 10); 842 /* Must be same bus when using -d option. */ 843 if (i_arg != NULL) { 844 if (atoi(i_arg + 5) != ifindex) 845 usage(); 846 } else { 847 asprintf(&i_arg, "usbus%d", ifindex); 848 } 849 /* Parse unit and endpoint, if any. */ 850 if (pp != NULL) { 851 if (*pp == '.') { 852 filt_unit = strtol(pp + 1, &pp, 10); 853 filt_ep = -1; 854 if (pp != NULL) { 855 if (*pp == '.') { 856 filt_ep = strtol(pp + 1, &pp, 10); 857 if (pp != NULL && *pp != 0) 858 usage(); 859 } else if (*pp != 0) { 860 usage(); 861 } 862 } 863 add_filter(filt_unit, filt_ep); 864 } else if (*pp != 0) { 865 usage(); 866 } 867 } 868 break; 869 case 'i': 870 i_arg = optarg; 871 break; 872 case 'r': 873 r_arg = optarg; 874 init_rfile(p); 875 break; 876 case 's': 877 snapshot = strtol(optarg, &pp, 10); 878 errno = 0; 879 if (pp != NULL && *pp != 0) 880 usage(); 881 if (snapshot == 0 && errno == EINVAL) 882 usage(); 883 /* snapeshot == 0 is special */ 884 if (snapshot == 0) 885 snapshot = -1; 886 break; 887 case 'b': 888 b_arg = optarg; 889 break; 890 case 'v': 891 verbose++; 892 break; 893 case 'w': 894 w_arg = optarg; 895 init_wfile(p); 896 break; 897 case 'f': 898 filt_unit = strtol(optarg, &pp, 10); 899 filt_ep = -1; 900 if (pp != NULL) { 901 if (*pp == '.') { 902 filt_ep = strtol(pp + 1, &pp, 10); 903 if (pp != NULL && *pp != 0) 904 usage(); 905 } else if (*pp != 0) { 906 usage(); 907 } 908 } 909 add_filter(filt_unit, filt_ep); 910 break; 911 default: 912 usage(); 913 /* NOTREACHED */ 914 } 915 } 916 917 if (i_arg == NULL) 918 i_arg = "usbus0"; 919 920 if (b_arg != NULL) { 921 p->bfd = open(b_arg, O_CREAT | O_TRUNC | 922 O_WRONLY, S_IRUSR | S_IWUSR); 923 if (p->bfd < 0) { 924 err(EXIT_FAILURE, "Could not open " 925 "'%s' for write", b_arg); 926 } 927 } 928 929 /* 930 * Require more verbosity to print anything when -w or -b is 931 * specified on the command line: 932 */ 933 if (w_arg != NULL || b_arg != NULL) 934 verbose--; 935 936 if (r_arg != NULL) { 937 read_file(p); 938 exit(EXIT_SUCCESS); 939 } 940 941 check_usb_pf_sysctl(); 942 943 p->fd = fd = open("/dev/bpf", O_RDONLY); 944 if (p->fd < 0) 945 err(EXIT_FAILURE, "Could not open BPF device"); 946 947 if (ioctl(fd, BIOCVERSION, (caddr_t)&bv) < 0) 948 err(EXIT_FAILURE, "BIOCVERSION ioctl failed"); 949 950 if (bv.bv_major != BPF_MAJOR_VERSION || 951 bv.bv_minor < BPF_MINOR_VERSION) 952 errx(EXIT_FAILURE, "Kernel BPF filter out of date"); 953 954 /* USB transfers can be greater than 64KByte */ 955 v = 1U << 16; 956 957 /* clear ifr structure */ 958 memset(&ifr, 0, sizeof(ifr)); 959 960 /* Try to create usbusN interface if it is not available. */ 961 s = socket(AF_LOCAL, SOCK_DGRAM, 0); 962 if (s < 0) 963 errx(EXIT_FAILURE, "Could not open a socket"); 964 ifindex = if_nametoindex(i_arg); 965 if (ifindex == 0) { 966 (void)strlcpy(ifr.ifr_name, i_arg, sizeof(ifr.ifr_name)); 967 if (ioctl(s, SIOCIFCREATE2, &ifr) < 0) 968 errx(EXIT_FAILURE, "Invalid bus interface: %s", i_arg); 969 } 970 971 for ( ; v >= USBPF_HDR_LEN; v >>= 1) { 972 (void)ioctl(fd, BIOCSBLEN, (caddr_t)&v); 973 (void)strlcpy(ifr.ifr_name, i_arg, sizeof(ifr.ifr_name)); 974 if (ioctl(fd, BIOCSETIF, (caddr_t)&ifr) >= 0) 975 break; 976 } 977 if (v == 0) 978 errx(EXIT_FAILURE, "No buffer size worked."); 979 980 if (ioctl(fd, BIOCGBLEN, (caddr_t)&v) < 0) 981 err(EXIT_FAILURE, "BIOCGBLEN ioctl failed"); 982 983 p->bufsize = v; 984 p->buffer = (uint8_t *)malloc(p->bufsize); 985 if (p->buffer == NULL) 986 errx(EX_SOFTWARE, "Out of memory."); 987 988 make_filter(&total_prog, snapshot); 989 990 if (ioctl(p->fd, BIOCSETF, (caddr_t)&total_prog) < 0) 991 err(EXIT_FAILURE, "BIOCSETF ioctl failed"); 992 993 free_filter(&total_prog); 994 995 /* 1 second read timeout */ 996 tv.tv_sec = 1; 997 tv.tv_usec = 0; 998 if (ioctl(p->fd, BIOCSRTIMEOUT, (caddr_t)&tv) < 0) 999 err(EXIT_FAILURE, "BIOCSRTIMEOUT ioctl failed"); 1000 1001 (void)signal(SIGINT, handle_sigint); 1002 1003 do_loop(p); 1004 1005 if (ioctl(fd, BIOCGSTATS, (caddr_t)&us) < 0) 1006 err(EXIT_FAILURE, "BIOCGSTATS ioctl failed"); 1007 1008 /* XXX what's difference between pkt_captured and us.us_recv? */ 1009 printf("\n"); 1010 printf("%d packets captured\n", pkt_captured); 1011 printf("%d packets received by filter\n", us.bs_recv); 1012 printf("%d packets dropped by kernel\n", us.bs_drop); 1013 1014 /* 1015 * Destroy the usbusN interface only if it was created by 1016 * usbdump(8). Ignore when it was already destroyed. 1017 */ 1018 if (ifindex == 0 && if_nametoindex(i_arg) > 0) { 1019 (void)strlcpy(ifr.ifr_name, i_arg, sizeof(ifr.ifr_name)); 1020 if (ioctl(s, SIOCIFDESTROY, &ifr) < 0) 1021 warn("SIOCIFDESTROY ioctl failed"); 1022 } 1023 close(s); 1024 1025 if (p->fd > 0) 1026 close(p->fd); 1027 if (p->rfd > 0) 1028 close(p->rfd); 1029 if (p->wfd > 0) 1030 close(p->wfd); 1031 if (p->bfd > 0) 1032 close(p->bfd); 1033 1034 return (EXIT_SUCCESS); 1035 } 1036