xref: /freebsd/usr.sbin/usbconfig/usbconfig.8 (revision 5eafaf9e68894cda4e8dca5f363be0b4f15b5cd6)

.\" $FreeBSD$
.\"
.\" Copyright (c) 2008-2019 Hans Petter Selasky. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd January 29, 2022
.Dt USBCONFIG 8
.Os
.Sh NAME
.Nm usbconfig
.Nd configure the USB subsystem
.Sh SYNOPSIS
.Nm
.Op Fl u Ar unit
.Op Fl a Ar addr
.Op Fl i Ar interface_index
.Op Fl v
.Op Ar cmds ...
.Nm
.Fl d
.Sm off
.Oo Oo Cm /dev/ Oc Cm ugen Oc Ar unit Cm \&. Ar addr
.Sm on
.Op Fl i Ar interface_index
.Op Fl v
.Op Ar cmds ...
.Sh DESCRIPTION
The
.Nm
utility is used to configure and dump information about the USB subsystem.
.Pp
The options are as follows:
.Bl -tag -width "-u unit"
.It Fl u Ar unit
Limit device range to USB devices connected to the given USBUS unit.
.It Fl a Ar addr
Limit device range to the given USB device index.
Should only be used in conjunction with the unit argument.
.It Xo
.Fl d
.Sm off
.Oo Oo Cm /dev/ Oc Cm ugen Oc Ar unit Cm \&. Ar addr
.Sm on
.Xc
Limit device range to USB devices connected to the given unit and address.
The unit and address coordinates may be prefixed by the lowercased word
.Cm ugen ,
or the full path name
.Cm /dev/ugen .
.It Fl h
Show help and available commands.
.It Fl i Ar interface_index
Specify interface index as indicated by the command description.
If this argument is not specified
a value of zero will be used for the interface index.
.It Fl v
Activate the
.Cm dump_device_desc ,
.Cm dump_curr_config_desc ,
and
.Cm show_ifdrv
commands
.Pq Dq verbose mode .
.El
.Pp
The following commands may be used with
.Nm :
.Bl -tag -width indent
.It Cm set_config Ar cfg_index
Choose the configuration for the USB device.
Valid values range from zero to the number reported as the
.Ar bNumConfigurations
in
.Cm dump_device_desc
output.
The special value of 255 unconfigures the device, detaching
the interface drivers and reducing the power consumption to minimum,
but without going into power saving mode or detaching from the bus.
In some cases, it prevents the device from charging.
.It Cm set_alt Ar alt_index
Choose the alternate interface for the selected interface and USB device.
Alternative settings for the current configuration are available as the
.Ar bAlternateSetting
in
.Cm dump_curr_config_desc
output.
Usually there is no need to adjust this setting.
This command uses the
.Fl i Ar interface_index
option.
.It Cm set_template Ar template
Set the global USB device side template.
See
.Xr usb_template 4
for more information.
.It Cm get_template
Get the current USB device side template.
.It Cm add_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name
Add a quirk by specifying the Vendor ID, Product ID, low and high
revision numbers, and the quirk name.
See
.Xr usb_quirk 4
for more information.
.It Cm remove_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name
Remove a quirk.
.It Cm add_quirk Ar quirk_name
Add quirk for the currently selected USB device.
.It Cm remove_quirk Ar quirk_name
Remove a quirk for the currently selected USB device.
.It Cm dump_all_desc
Display the device and configuration descriptors.
.It Cm dump_quirk_names
Display the list of supported quirk names.
.It Cm dump_device_quirks
Display the list of current device quirks.
.It Cm dump_device_desc
Display the device descriptor.
.It Cm dump_curr_config_desc
Display current configuration descriptor.
.It Cm dump_all_config_desc
Display all the configuration descriptors.
.It Cm dump_string Ar index
Display string descriptor at selected index.
.It Cm dump_info
Display summary information about the device.
.It Cm dump_stats
Display USB transfer statistics.
.It Cm show_ifdrv
Display the list of interface drivers (such as
.Xr ukbd 4
or
.Xr u3g 4 )
currently attached to the device.
.It Cm detach_kernel_driver
Detach kernel driver for the selected interface and USB device.
This command uses the
.Fl i Ar interface_index
option.
.It Cm suspend
Force the device to suspend.
.It Cm resume
Force the device to resume.
.It Cm power_off
Turn the device off.
.It Cm power_save
Turn the automatic suspend and resume on.
This is the default for USB hubs.
.It Cm power_on
Turn the device on and disable automatic suspend and resume.
This is the default for non-hub devices.
.It Cm reset
Reset the device.
This forces the USB stack to reenumerate the bus.
.It Cm list
List all available USB devices.
This is the default if
.Nm
is called without specifying a command.
.It Cm do_request Ar bmReqTyp Ar bReq Ar wVal Ar wIdx Ar wLen Ar data...
Perform a synchronous control request on the specified device.
See
.Xr libusb20_dev_request_sync 3
for more information.
.El
.Sh EXAMPLES
List all connected USB devices and their attached interface drivers:
.Pp
.Dl usbconfig show_ifdrv
.Pp
Dump device and configuration descriptors for device on USB bus 1 at address 2:
.Pp
.Dl usbconfig -d ugen1.2 dump_all_desc
.Pp
Dump HID descriptor for device on USB bus 1 at address 2:
.Pp
.Dl usbconfig -d ugen1.2 do_request 0x81 0x06 0x2200 0 0x100
.Pp
Power off the device on USB bus 1 at address 2:
.Pp
.Dl usbconfig -d ugen1.2 power_off
.Sh SEE ALSO
.Xr usb 4 ,
.Xr usb_quirk 4 ,
.Xr usb_template 4