1.\" $KAME: rtadvd.conf.5,v 1.50 2005/01/14 05:30:59 jinmei Exp $ 2.\" 3.\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. 4.\" All rights reserved. 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following conditions 8.\" are met: 9.\" 1. Redistributions of source code must retain the above copyright 10.\" notice, this list of conditions and the following disclaimer. 11.\" 2. Redistributions in binary form must reproduce the above copyright 12.\" notice, this list of conditions and the following disclaimer in the 13.\" documentation and/or other materials provided with the distribution. 14.\" 3. Neither the name of the project nor the names of its contributors 15.\" may be used to endorse or promote products derived from this software 16.\" without specific prior written permission. 17.\" 18.\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND 19.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21.\" ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE 22.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28.\" SUCH DAMAGE. 29.\" 30.\" $FreeBSD$ 31.\" 32.Dd June 4, 2011 33.Dt RTADVD.CONF 5 34.Os 35.Sh NAME 36.Nm rtadvd.conf 37.Nd config file for router advertisement daemon 38.Sh DESCRIPTION 39This file describes how the router advertisement packets must be constructed 40for each of the interfaces. 41.Pp 42As described in 43.Xr rtadvd 8 , 44you do not have to set this configuration file up at all, 45unless you need some special configurations. 46You may even omit the file as a whole. 47In such cases, the 48.Nm rtadvd 49daemon will automatically configure itself using default values 50specified in the specification. 51.Pp 52It obeys the famous 53.Xr termcap 5 54file format. 55Each line in the file describes a network interface. 56Fields are separated by a colon 57.Pq Sq \&: , 58and each field contains one capability description. 59Lines may be concatenated by the 60.Sq \e 61character. 62The comment marker is the 63.Sq \&# 64character. 65.Sh CAPABILITIES 66Capabilities describe the value to be filled into ICMPv6 router 67advertisement messages and to control 68.Xr rtadvd 8 69behavior. 70Therefore, you are encouraged to read IETF neighbor discovery documents 71if you would like to modify the sample configuration file. 72.Pp 73Note that almost all items have default values. 74If you omit an item, the default value of the item will be used. 75.Pp 76There are two items which control the interval of sending router advertisements. 77These items can be omitted, then 78.Nm rtadvd 79will use the default values. 80.Bl -tag -width indent 81.It Cm \&maxinterval 82(num) The maximum time allowed between sending unsolicited 83multicast router advertisements 84.Pq unit: seconds . 85The default value is 600. 86Its value must be no less than 4 seconds 87and no greater than 1800 seconds. 88.It Cm \&mininterval 89(num) The minimum time allowed between sending unsolicited multicast 90router advertisements 91.Pq unit: seconds . 92The default value is the one third of value of 93.Cm maxinterval . 94Its value must be no less than 3 seconds and no greater than .75 * 95the value of 96.Cm maxinterval . 97.El 98.Pp 99The following items are for ICMPv6 router advertisement message 100header. 101These items can be omitted, then 102.Nm rtadvd 103will use the default values. 104.Bl -tag -width indent 105.It Cm \&chlim 106(num) The value for Cur Hop Limit field. 107The default value is 64. 108.It Cm \&raflags 109(str or num) A 8-bit flags field in router advertisement message header. 110This field can be specified either as a case-sensitive string or as an 111integer. 112A string consists of characters each of which corresponds to a 113particular flag bit(s). 114An integer should be the logical OR of all enabled bits. 115Bit 7 116.Po 117.Li 'm' or 0x80 118.Pc 119means Managed address configuration flag bit, 120and Bit 6 121.Po 122.Li 'o' or 0x40 123.Pc 124means Other stateful configuration flag bit. 125Bit 4 126.Po 127.Li 0x10 128.Pc 129and Bit 3 130.Po 131.Li 0x08 132.Pc 133are used to encode router preference. 134Bits 01 135.Po 136or 'h' 137.Pc 138means high, 00 means medium, and 11 139.Po 140or 'l' 141.Pc 142means low. 143Bits 10 is reserved, and must not be specified. 144There is no character to specify the medium preference explicitly. 145The default value of the entire flag is 0 146.Po 147or a null string, 148.Pc 149which means no additional 150configuration methods, and the medium router preference. 151.It Cm \&rltime 152(num) Router lifetime field 153.Pq unit: seconds . 154The value must be either zero or between 155the value of 156.Cm maxinterval 157and 9000. 158When 159.Nm rtadvd 160runs on a host, this value must explicitly set 0 on all the 161advertising interfaces as described in 162.Xr rtadvd 8 . 163The default value is 1800. 164.It Cm \&rtime 165(num) Reachable time field 166.Pq unit: milliseconds . 167The default value is 0, which means unspecified by this router. 168.It Cm \&retrans 169(num) Retrans Timer field 170.Pq unit: milliseconds . 171The default value is 0, which means unspecified by this router. 172.El 173.Pp 174The following items are for ICMPv6 prefix information option, 175which will be attached to router advertisement header. 176These items can be omitted, then 177.Nm rtadvd 178will automatically get appropriate prefixes from the kernel's routing table, 179and advertise the prefixes with the default parameters. 180Keywords other than 181.Cm clockskew 182and 183.Cm noifprefix 184can be augmented with a number, like 185.Dq Li prefix2 , 186to specify multiple prefixes. 187.Bl -tag -width indent 188.It Cm \&noifprefix 189(bool) Specifies no prefix on the network interfaces will be advertised. 190By default 191.Nm rtadvd 192automatically gathers on-link prefixes from all of the network interfaces 193and advertise them. 194The 195.Cm noifprefix 196disables that behavior. 197If this is specified and no 198.Cm addr 199keyword is specified, no prefix information option will be included in the 200message. 201.It Cm \&clockskew 202(num) Time skew to adjust link propagation delays and clock skews 203between routers on the link 204.Pq unit: seconds . 205This value is used in consistency check for locally-configured and 206advertised prefix lifetimes, and has its meaning when the local router 207configures a prefix on the link with a lifetime that decrements in 208real time. 209If the value is 0, it means the consistency check will be skipped 210for such prefixes. 211The default value is 0. 212.It Cm \&prefixlen 213(num) Prefix length field. 214The default value is 64. 215.It Cm \&pinfoflags 216(str or num) A 8-bit flags field in prefix information option. 217This field can be specified either as a case-sensitive string or as an 218integer. 219A string consists of characters each of which corresponds to a 220particular flag bit(s). 221An integer should be the logical OR of all enabled bits. 222Bit 7 223.Po 224.Li 'l' or 0x80 225.Pc 226means On-link flag bit, 227and Bit 6 228.Po 229.Li 'a' or 0x40 230.Pc 231means Autonomous address-configuration flag bit. 232The default value is "la" or 0xc0, i.e., both bits are set. 233.It Cm \&addr 234(str) The address filled into Prefix field. 235Since 236.Dq \&: 237is used for 238.Xr termcap 5 239file format as well as IPv6 numeric address, the field MUST be quoted by 240doublequote character. 241.It Cm \&vltime 242(num) Valid lifetime field 243.Pq unit: seconds . 244The default value is 2592000 (30 days). 245.It Cm \&vltimedecr 246(bool) This item means the advertised valid lifetime will decrement 247in real time, which is disabled by default. 248.It Cm \&pltime 249(num) Preferred lifetime field 250.Pq unit: seconds . 251The default value is 604800 (7 days). 252.It Cm \&pltimedecr 253(bool) This item means the advertised preferred lifetime will decrement 254in real time, which is disabled by default. 255.El 256.Pp 257The following item is for ICMPv6 MTU option, 258which will be attached to router advertisement header. 259This item can be omitted, then 260.Nm rtadvd 261will use the default value. 262.Bl -tag -width indent 263.It Cm \&mtu 264(num or str) MTU (maximum transmission unit) field. 265If 0 is specified, it means that the option will not be included. 266The default value is 0. 267If the special string 268.Dq auto 269is specified for this item, MTU option will be included and its value 270will be set to the interface MTU automatically. 271.El 272.Pp 273The following item controls ICMPv6 source link-layer address option, 274which will be attached to router advertisement header. 275As noted above, you can just omit the item, then 276.Nm rtadvd 277will use the default value. 278.Bl -tag -width indent 279.It Cm \&nolladdr 280(bool) By default 281.Po 282if 283.Cm \&nolladdr 284is not specified 285.Pc , 286.Xr rtadvd 8 287will try to get link-layer address for the interface from the kernel, 288and attach that in source link-layer address option. 289If this capability exists, 290.Xr rtadvd 8 291will not attach source link-layer address option to 292router advertisement packets. 293.El 294.Pp 295The following item controls ICMPv6 home agent information option, 296which was defined with mobile IPv6 support. 297It will be attached to router advertisement header just like other options do. 298.Bl -tag -width indent 299.It Cm \&hapref 300(num) Specifies home agent preference. 301If set to non-zero, 302.Cm \&hatime 303must be present as well. 304.It Cm \&hatime 305(num) Specifies home agent lifetime. 306.El 307.Pp 308When mobile IPv6 support is turned on for 309.Xr rtadvd 8 , 310advertisement interval option will be attached to router advertisement 311packet, by configuring 312.Cm \&maxinterval 313explicitly. 314.Pp 315The following items are for ICMPv6 route information option, 316which will be attached to router advertisement header. 317These items are optional. 318Each items can be augmented with number, like 319.Dq Li rtplen2 , 320to specify multiple routes. 321.Bl -tag -width indent 322.It Cm \&rtprefix 323(str) The prefix filled into the Prefix field of route information option. 324Since 325.Dq \&: 326is used for 327.Xr termcap 5 328file format as well as IPv6 numeric address, the field MUST be quoted by 329doublequote character. 330.It Cm \&rtplen 331(num) Prefix length field in route information option. 332The default value is 64. 333.It Cm \&rtflags 334(str or num) A 8-bit flags field in route information option. 335Currently only the preference values are defined. 336The notation is same as that of the raflags field. 337Bit 4 338.Po 339.Li 0x10 340.Pc 341and 342Bit 3 343.Po 344.Li 0x08 345.Pc 346are used to encode the route preference for the route. 347The default value is 0x00, i.e., medium preference. 348.It Cm \&rtltime 349(num) route lifetime field in route information option. 350.Pq unit: seconds . 351Since the specification does not define the default value of this 352item, the value for this item should be specified by hand. 353However, 354.Nm rtadvd 355allows this item to be unspecified, and uses the router lifetime 356as the default value in such a case, just for compatibility with an 357old version of the program. 358.El 359.Pp 360In the above list, each keyword beginning with 361.Dq Li rt 362could be replaced with the one beginning with 363.Dq Li rtr 364for backward compatibility reason. 365For example, 366.Cm rtrplen 367is accepted instead of 368.Cm rtplen . 369However, keywords that start with 370.Dq Li rtr 371have basically been obsoleted, and should not be used any more. 372.Pp 373The following items are for ICMPv6 Recursive DNS Server Option and 374DNS Search List Option 375.Pq RFC 6106 , 376which will be attached to router advertisement header. 377These items are optional. 378.Bl -tag -width indent 379.It Cm \&rdnss 380(str) The IPv6 address of one or more recursive DNS servers. 381The argument must be inside double quotes. 382Multiple DNS servers can be specified in a comma-separated string. 383If different lifetimes are needed for different servers, 384separate entries can be given by using 385.Cm rdnss , 386.Cm rdnss0 , 387.Cm rdnss1 , 388.Cm rdnss2 ... 389options with corresponding 390.Cm rdnssltime , 391.Cm rdnssltime0 , 392.Cm rdnssltime1 , 393.Cm rdnssltime2 ... 394entries. 395Note that the maximum number of servers depends on the receiver side. 396See also 397.Xr resolver 5 398manual page for resolver implementation in 399.Fx . 400.It Cm \&rdnssltime 401The lifetime of the 402.Cm rdnss 403DNS server entries. 404The default value is 3/2 of the interval time. 405.It Cm \&dnssl 406(str) One or more domain names in a comma-separated string. 407These domain names will be used when making DNS queries on a 408non-fully-qualified domain name. 409If different lifetimes are needed for different domains, separate entries 410can be given by using 411.Cm dnssl , 412.Cm dnssl0 , 413.Cm dnssl1 , 414.Cm dnssl2 ... 415options with corresponding 416.Cm dnsslltime , 417.Cm dnsslltime0 , 418.Cm dnsslltime1 , 419.Cm dnsslltime2 ... 420entries. 421Note that the maximum number of names depends on the receiver side. 422See also 423.Xr resolver 5 424manual page for resolver implementation in 425.Fx . 426.It Cm \&dnsslltime 427The lifetime of the 428.Cm dnssl 429DNS search list entries. 430The default value is 3/2 of the interval time. 431.El 432.Pp 433You can also refer one line from another by using 434.Cm tc 435capability. 436See 437.Xr termcap 5 438for details on the capability. 439.Sh EXAMPLES 440As presented above, all of the advertised parameters have default values 441defined in specifications, and hence you usually do not have to set them 442by hand, unless you need special non-default values. 443It can cause interoperability problem if you use an ill-configured 444parameter. 445.Pp 446To override a configuration parameter, you can specify the parameter alone. 447With the following configuration, 448.Xr rtadvd 8 449overrides the router lifetime parameter for the 450.Li ne0 451interface. 452.Bd -literal -offset indent 453ne0:\\ 454 :rltime#0: 455.Ed 456.Pp 457The following example manually configures prefixes advertised from the 458.Li ef0 459interface. 460The configuration must be used with the 461.Fl s 462option to 463.Xr rtadvd 8 . 464.Bd -literal -offset indent 465ef0:\\ 466 :addr="2001:db8:ffff:1000::":prefixlen#64: 467.Ed 468.Pp 469The following example configures the 470.Li wlan0 471interface and adds two DNS servers and a DNS domain search options 472using the default option lifetime values. 473.Bd -literal -offset indent 474wlan0:\\ 475 :addr="2001:db8:ffff:1000::":prefixlen#64:\\ 476 :rdnss="2001:db8:ffff::10,2001:db8:ffff::2:43":\\ 477 :dnssl="example.com": 478.Ed 479.Pp 480The following example presents the default values in an explicit manner. 481The configuration is provided just for reference purposes; 482YOU DO NOT NEED TO HAVE IT AT ALL. 483.Bd -literal -offset indent 484default:\\ 485 :chlim#64:raflags#0:rltime#1800:rtime#0:retrans#0:\\ 486 :pinfoflags="la":vltime#2592000:pltime#604800:mtu#0: 487ef0:\\ 488 :addr="2001:db8:ffff:1000::":prefixlen#64:tc=default: 489.Ed 490.Sh SEE ALSO 491.Xr resolver 5 , 492.Xr termcap 5 , 493.Xr rtadvd 8 , 494.Xr rtsol 8 495.Rs 496.%A Thomas Narten 497.%A Erik Nordmark 498.%A W. A. Simpson 499.%A Hesham Soliman 500.%T Neighbor Discovery for IP version 6 (IPv6) 501.%R RFC 4861 502.Re 503.Rs 504.%A Thomas Narten 505.%A Erik Nordmark 506.%A W. A. Simpson 507.%T Neighbor Discovery for IP version 6 (IPv6) 508.%R RFC 2461 (obsoleted by RFC 4861) 509.Re 510.Rs 511.%A Richard Draves 512.%T Default Router Preferences and More-Specific Routes 513.%R draft-ietf-ipngwg-router-selection-xx.txt 514.Re 515.Rs 516.%A J. Jeong 517.%A S. Park 518.%A L. Beloeil 519.%A S. Madanapalli 520.%T IPv6 Router Advertisement Options for DNS Configuration 521.%R RFC 6106 522.Re 523.Sh HISTORY 524The 525.Xr rtadvd 8 526and the configuration file 527.Nm 528first appeared in WIDE Hydrangea IPv6 protocol stack kit. 529.\" .Sh BUGS 530.\" (to be written) 531