1.\" Copyright (c) 1996 2.\" Mike Pritchard <mpp@FreeBSD.org>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. All advertising materials mentioning features or use of this software 13.\" must display the following acknowledgement: 14.\" This product includes software developed by Mike Pritchard. 15.\" 4. Neither the name of the author nor the names of its contributors 16.\" may be used to endorse or promote products derived from this software 17.\" without specific prior written permission. 18.\" 19.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29.\" SUCH DAMAGE. 30.\" 31.Dd May 15, 2008 32.Dt MOUSED 8 33.Os 34.Sh NAME 35.Nm moused 36.Nd pass mouse data to the console driver 37.Sh SYNOPSIS 38.Nm 39.Op Fl DPRacdfs 40.Op Fl I Ar file 41.Op Fl F Ar rate 42.Op Fl r Ar resolution 43.Op Fl S Ar baudrate 44.Op Fl VH Op Fl U Ar distance Fl L Ar distance 45.Op Fl A Ar exp Ns Op , Ns Ar offset 46.Op Fl a Ar X Ns Op , Ns Ar Y 47.Op Fl C Ar threshold 48.Op Fl m Ar N=M 49.Op Fl w Ar N 50.Op Fl z Ar target 51.Op Fl t Ar mousetype 52.Op Fl l Ar level 53.Op Fl 3 Op Fl E Ar timeout 54.Op Fl T Ar distance Ns Op , Ns Ar time Ns Op , Ns Ar after 55.Fl p Ar port 56.Pp 57.Nm 58.Op Fl Pd 59.Fl p Ar port 60.Fl i Ar info 61.Sh DESCRIPTION 62The 63.Nm 64utility and the console driver work together to support 65mouse operation in the text console and user programs. 66They virtualize the mouse and provide user programs with mouse data 67in the standard format 68(see 69.Xr sysmouse 4 ) . 70.Pp 71The mouse daemon listens to the specified port for mouse data, 72interprets and then passes it via ioctls to the console driver. 73The mouse daemon 74reports translation movement, button press/release 75events and movement of the roller or the wheel if available. 76The roller/wheel movement is reported as 77.Dq Z 78axis movement. 79.Pp 80The console driver will display the mouse pointer on the screen 81and provide cut and paste functions if the mouse pointer is enabled 82in the virtual console via 83.Xr vidcontrol 1 . 84If 85.Xr sysmouse 4 86is opened by the user program, the console driver also passes the mouse 87data to the device so that the user program will see it. 88.Pp 89If the mouse daemon receives the signal 90.Dv SIGHUP , 91it will reopen the mouse port and reinitialize itself. 92Useful if 93the mouse is attached/detached while the system is suspended. 94.Pp 95If the mouse daemon receives the signal 96.Dv SIGUSR1 , 97it will stop passing mouse events. 98Sending the signal 99.Dv SIGUSR1 100again will resume passing mouse events. 101Useful if your typing on a laptop is 102interrupted by accidentally touching the mouse pad. 103.Pp 104The following options are available: 105.Bl -tag -width indent 106.It Fl 3 107Emulate the third (middle) button for 2-button mice. 108It is emulated 109by pressing the left and right physical buttons simultaneously. 110.It Fl C Ar threshold 111Set double click speed as the maximum interval in msec between button clicks. 112Without this option, the default value of 500 msec will be assumed. 113This option will have effect only on the cut and paste operations 114in the text mode console. 115The user program which is reading mouse data 116via 117.Xr sysmouse 4 118will not be affected. 119.It Fl D 120Lower DTR on the serial port. 121This option is valid only if 122.Ar mousesystems 123is selected as the protocol type. 124The DTR line may need to be dropped for a 3-button mouse 125to operate in the 126.Ar mousesystems 127mode. 128.It Fl E Ar timeout 129When the third button emulation is enabled 130(see above), 131the 132.Nm 133utility waits 134.Ar timeout 135msec at most before deciding whether two buttons are being pressed 136simultaneously. 137The default timeout is 100 msec. 138.It Fl F Ar rate 139Set the report rate (reports/sec) of the device if supported. 140.It Fl L Ar distance 141When 142.Dq Virtual Scrolling 143is enabled, the 144.Fl L 145option can be used to set the 146.Ar distance 147(in pixels) that the mouse must move before a scroll event 148is generated. 149This effectively controls the scrolling speed. 150The default 151.Ar distance 152is 2 pixels. 153.It Fl H 154Enable 155.Dq Horizontal Virtual Scrolling . 156With this option set, holding the middle mouse 157button down will cause motion to be interpreted as 158horizontal scrolling. 159Use the 160.Fl U 161option to set the distance the mouse must move before the scrolling mode is 162activated and the 163.Fl L 164option to set the scrolling speed. 165This option may be used with or without the 166.Fl V 167option. 168.It Fl I Ar file 169Write the process id of the 170.Nm 171utility in the specified file. 172Without this option, the process id will be stored in 173.Pa /var/run/moused.pid . 174.It Fl P 175Do not start the Plug and Play COM device enumeration procedure 176when identifying the serial mouse. 177If this option is given together with the 178.Fl i 179option, the 180.Nm 181utility will not be able to print useful information for the serial mouse. 182.It Fl R 183Lower RTS on the serial port. 184This option is valid only if 185.Ar mousesystems 186is selected as the protocol type by the 187.Fl t 188option below. 189It is often used with the 190.Fl D 191option above. 192Both RTS and DTR lines may need to be dropped for 193a 3-button mouse to operate in the 194.Ar mousesystems 195mode. 196.It Fl S Ar baudrate 197Select the baudrate for the serial port (1200 to 9600). 198Not all serial mice support this option. 199.It Fl T Ar distance Ns Op , Ns Ar time Ns Op , Ns Ar after 200Terminate drift. 201Use this option if mouse pointer slowly wanders when mouse is not moved. 202Movements up to 203.Ar distance 204(for example 4) pixels (X+Y) in 205.Ar time 206msec (default 500) are ignored, except during 207.Ar after 208msec (default 4000) since last real mouse movement. 209.It Fl V 210Enable 211.Dq Virtual Scrolling . 212With this option set, holding the middle mouse 213button down will cause motion to be interpreted as scrolling. 214Use the 215.Fl U 216option to set the distance the mouse must move before the scrolling mode is 217activated and the 218.Fl L 219option to set the scrolling speed. 220.It Fl U Ar distance 221When 222.Dq Virtual Scrolling 223is enabled, the 224.Fl U 225option can be used to set the 226.Ar distance 227(in pixels) that the mouse must move before the scrolling 228mode is activated. 229The default 230.Ar distance 231is 3 pixels. 232.It Fl A Ar exp Ns Op , Ns Ar offset 233Apply exponential (dynamic) acceleration to mouse movements: 234the faster you move the mouse, the more it will be accelerated. 235That means that small mouse movements are not accelerated, 236so they are still very accurate, while a faster movement will 237drive the pointer quickly across the screen. 238.Pp 239The 240.Ar exp 241value specifies the exponent, which is basically 242the amount of acceleration. 243Useful values are in the range 1.1 to 2.0, but it depends on 244your mouse hardware and your personal preference. 245A value of 1.0 means no exponential acceleration. 246A value of 2.0 means squared acceleration (i.e. if 247you move the mouse twice as fast, the pointer will move 248four times as fast on the screen). 249Values beyond 2.0 are possible but not recommended. 250A good value to start is probably 1.5. 251.Pp 252The optional 253.Ar offset 254value specifies the distance at which the acceleration begins. 255The default is 1.0, which means that the acceleration is applied 256to movements larger than one unit. 257If you specify a larger value, it takes more speed for 258the acceleration to kick in, i.e. the speed range for 259small and accurate movements is wider. 260Usually the default should be sufficient, but if you're 261not satisfied with the behaviour, try a value of 2.0. 262.Pp 263Note that the 264.Fl A 265option interacts badly with the X server's own acceleration, 266which doesn't work very well anyway. 267Therefore it is recommended to switch it off if necessary: 268.Dq xset m 1 . 269.It Fl a Ar X Ns Op , Ns Ar Y 270Accelerate or decelerate the mouse input. 271This is a linear acceleration only. 272Values less than 1.0 slow down movement, values greater than 1.0 speed it 273up. 274Specifying only one value sets the acceleration for both axes. 275.Pp 276You can use the 277.Fl a 278and 279.Fl A 280options at the same time to have the combined effect 281of linear and exponential acceleration. 282.It Fl c 283Some mice report middle button down events 284as if the left and right buttons are being pressed. 285This option handles this. 286.It Fl d 287Enable debugging messages. 288.It Fl f 289Do not become a daemon and instead run as a foreground process. 290Useful for testing and debugging. 291.It Fl i Ar info 292Print specified information and quit. 293Available pieces of 294information are: 295.Pp 296.Bl -tag -compact -width modelxxx 297.It Ar port 298Port (device file) name, i.e.\& 299.Pa /dev/cuau0 , 300and 301.Pa /dev/psm0 . 302.It Ar if 303Interface type: serial, bus, inport or ps/2. 304.It Ar type 305Protocol type. 306It is one of the types listed under the 307.Fl t 308option below or 309.Ar sysmouse 310if the driver supports the 311.Ar sysmouse 312data format standard. 313.It Ar model 314Mouse model. 315The 316.Nm 317utility may not always be able to identify the model. 318.It Ar all 319All of the above items. 320Print port, interface, type and model in this order 321in one line. 322.El 323.Pp 324If the 325.Nm 326utility cannot determine the requested information, it prints 327.Dq Li unknown 328or 329.Dq Li generic . 330.It Fl l Ar level 331Specifies at which level 332.Nm 333should operate the mouse driver. 334Refer to 335.Sx Operation Levels 336in 337.Xr psm 4 338for more information on this. 339.It Fl m Ar N=M 340Assign the physical button 341.Ar M 342to the logical button 343.Ar N . 344You may specify as many instances of this option as you like. 345More than one physical button may be assigned to a logical button at the 346same time. 347In this case the logical button will be down, 348if either of the assigned physical buttons is held down. 349Do not put space around 350.Ql = . 351.It Fl p Ar port 352Use 353.Ar port 354to communicate with the mouse. 355.It Fl r Ar resolution 356Set the resolution of the device; in Dots Per Inch, or 357.Ar low , 358.Ar medium-low , 359.Ar medium-high 360or 361.Ar high . 362This option may not be supported by all the device. 363.It Fl s 364Select a baudrate of 9600 for the serial line. 365Not all serial mice support this option. 366.It Fl t Ar type 367Specify the protocol type of the mouse attached to the port. 368You may explicitly specify a type listed below, or use 369.Ar auto 370to let the 371.Nm 372utility automatically select an appropriate protocol for the given 373mouse. 374If you entirely omit this option in the command line, 375.Fl t Ar auto 376is assumed. 377Under normal circumstances, 378you need to use this option only if the 379.Nm 380utility is not able to detect the protocol automatically 381(see 382.Sx "Configuring Mouse Daemon" ) . 383.Pp 384Note that if a protocol type is specified with this option, the 385.Fl P 386option above is implied and Plug and Play COM device enumeration 387procedure will be disabled. 388.Pp 389Also note that if your mouse is attached to the PS/2 mouse port, you should 390always choose 391.Ar auto 392or 393.Ar ps/2 , 394regardless of the brand and model of the mouse. 395Likewise, if your 396mouse is attached to the bus mouse port, choose 397.Ar auto 398or 399.Ar busmouse . 400Serial mouse protocols will not work with these mice. 401.Pp 402For the USB mouse, the protocol must be 403.Ar auto . 404No other protocol will work with the USB mouse. 405.Pp 406Valid types for this option are 407listed below. 408.Pp 409For the serial mouse: 410.Bl -tag -compact -width mousesystemsxxx 411.It Ar microsoft 412Microsoft serial mouse protocol. 413Most 2-button serial mice use this protocol. 414.It Ar intellimouse 415Microsoft IntelliMouse protocol. 416Genius NetMouse, 417.Tn ASCII 418Mie Mouse, 419Logitech MouseMan+ and FirstMouse+ use this protocol too. 420Other mice with a roller/wheel may be compatible with this protocol. 421.It Ar mousesystems 422MouseSystems 5-byte protocol. 4233-button mice may use this protocol. 424.It Ar mmseries 425MM Series mouse protocol. 426.It Ar logitech 427Logitech mouse protocol. 428Note that this is for old Logitech models. 429.Ar mouseman 430or 431.Ar intellimouse 432should be specified for newer models. 433.It Ar mouseman 434Logitech MouseMan and TrackMan protocol. 435Some 3-button mice may be compatible 436with this protocol. 437Note that MouseMan+ and FirstMouse+ use 438.Ar intellimouse 439protocol rather than this one. 440.It Ar glidepoint 441ALPS GlidePoint protocol. 442.It Ar thinkingmouse 443Kensington ThinkingMouse protocol. 444.It Ar mmhitab 445Hitachi tablet protocol. 446.It Ar x10mouseremote 447X10 MouseRemote. 448.It Ar kidspad 449Genius Kidspad and Easypad protocol. 450.It Ar versapad 451Interlink VersaPad protocol. 452.It Ar gtco_digipad 453GTCO Digipad protocol. 454.El 455.Pp 456For the bus and InPort mouse: 457.Bl -tag -compact -width mousesystemsxxx 458.It Ar busmouse 459This is the only protocol type available for 460the bus and InPort mouse and should be specified for any bus mice 461and InPort mice, regardless of the brand. 462.El 463.Pp 464For the PS/2 mouse: 465.Bl -tag -compact -width mousesystemsxxx 466.It Ar ps/2 467This is the only protocol type available for the PS/2 mouse 468and should be specified for any PS/2 mice, regardless of the brand. 469.El 470.Pp 471For the USB mouse, 472.Ar auto 473is the only protocol type available for the USB mouse 474and should be specified for any USB mice, regardless of the brand. 475.It Fl w Ar N 476Make the physical button 477.Ar N 478act as the wheel mode button. 479While this button is pressed, X and Y axis movement is reported to be zero 480and the Y axis movement is mapped to Z axis. 481You may further map the Z axis movement to virtual buttons by the 482.Fl z 483option below. 484.It Fl z Ar target 485Map Z axis (roller/wheel) movement to another axis or to virtual buttons. 486Valid 487.Ar target 488maybe: 489.Bl -tag -compact -width x__ 490.It Ar x 491.It Ar y 492X or Y axis movement will be reported when the Z axis movement is detected. 493.It Ar N 494Report down events for the virtual buttons 495.Ar N 496and 497.Ar N+1 498respectively when negative and positive Z axis movement 499is detected. 500There do not need to be physical buttons 501.Ar N 502and 503.Ar N+1 . 504Note that mapping to logical buttons is carried out after mapping 505from the Z axis movement to the virtual buttons is done. 506.It Ar N1 N2 507Report down events for the virtual buttons 508.Ar N1 509and 510.Ar N2 511respectively when negative and positive Z axis movement 512is detected. 513.It Ar N1 N2 N3 N4 514This is useful for the mouse with two wheels of which 515the second wheel is used to generate horizontal scroll action, 516and for the mouse which has a knob or a stick which can detect 517the horizontal force applied by the user. 518.Pp 519The motion of the second wheel will be mapped to the buttons 520.Ar N3 , 521for the negative direction, and 522.Ar N4 , 523for the positive direction. 524If the buttons 525.Ar N3 526and 527.Ar N4 528actually exist in this mouse, their actions will not be detected. 529.Pp 530Note that horizontal movement or second roller/wheel movement may not 531always be detected, 532because there appears to be no accepted standard as to how it is encoded. 533.Pp 534Note also that some mice think left is the negative horizontal direction; 535others may think otherwise. 536Moreover, there are some mice whose two wheels are both mounted vertically, 537and the direction of the second vertical wheel does not match the 538first one. 539.El 540.El 541.Ss Configuring Mouse Daemon 542The first thing you need to know is the interface type 543of the mouse you are going to use. 544It can be determined by looking at the connector of the mouse. 545The serial mouse has a D-Sub female 9- or 25-pin connector. 546The bus and InPort mice have either a D-Sub male 9-pin connector 547or a round DIN 9-pin connector. 548The PS/2 mouse is equipped with a small, round DIN 6-pin connector. 549Some mice come with adapters with which the connector can 550be converted to another. 551If you are to use such an adapter, 552remember the connector at the very end of the mouse/adapter pair is 553what matters. 554The USB mouse has a flat rectangular connector. 555.Pp 556The next thing to decide is a port to use for the given interface. 557The PS/2 mouse is always at 558.Pa /dev/psm0 . 559There may be more than one serial port to which the serial 560mouse can be attached. 561Many people often assign the first, built-in 562serial port 563.Pa /dev/cuau0 564to the mouse. 565You can attach multiple USB mice to your system or to your USB hub. 566They are accessible as 567.Pa /dev/ums0 , /dev/ums1 , 568and so on. 569.Pp 570You may want to create a symbolic link 571.Pa /dev/mouse 572pointing to the real port to which the mouse is connected, so that you 573can easily distinguish which is your 574.Dq mouse 575port later. 576.Pp 577The next step is to guess the appropriate protocol type for the mouse. 578The 579.Nm 580utility may be able to automatically determine the protocol type. 581Run the 582.Nm 583utility with the 584.Fl i 585option and see what it says. 586If the command can identify 587the protocol type, no further investigation is necessary on your part. 588You may start the daemon without explicitly specifying a protocol type 589(see 590.Sx EXAMPLES ) . 591.Pp 592The command may print 593.Ar sysmouse 594if the mouse driver supports this protocol type. 595.Pp 596Note that the 597.Dv type 598and 599.Dv model 600printed by the 601.Fl i 602option do not necessarily match the product name of the pointing device 603in question, but they may give the name of the device with which it is 604compatible. 605.Pp 606If the 607.Fl i 608option yields nothing, you need to specify a protocol type to the 609.Nm 610utility by the 611.Fl t 612option. 613You have to make a guess and try. 614There is rule of thumb: 615.Pp 616.Bl -enum -compact -width 1.X 617.It 618The bus and InPort mice always use 619.Ar busmouse 620protocol regardless of the brand of the mouse. 621.It 622The 623.Ar ps/2 624protocol should always be specified for the PS/2 mouse 625regardless of the brand of the mouse. 626.It 627You must specify the 628.Ar auto 629protocol for the USB mouse. 630.It 631Most 2-button serial mice support the 632.Ar microsoft 633protocol. 634.It 6353-button serial mice may work with the 636.Ar mousesystems 637protocol. 638If it does not, it may work with the 639.Ar microsoft 640protocol although 641the third (middle) button will not function. 6423-button serial mice may also work with the 643.Ar mouseman 644protocol under which the third button may function as expected. 645.It 6463-button serial mice may have a small switch to choose between 647.Dq MS 648and 649.Dq PC , 650or 651.Dq 2 652and 653.Dq 3 . 654.Dq MS 655or 656.Dq 2 657usually mean the 658.Ar microsoft 659protocol. 660.Dq PC 661or 662.Dq 3 663will choose the 664.Ar mousesystems 665protocol. 666.It 667If the mouse has a roller or a wheel, it may be compatible with the 668.Ar intellimouse 669protocol. 670.El 671.Pp 672To test if the selected protocol type is correct for the given mouse, 673enable the mouse pointer in the current virtual console, 674.Pp 675.Dl "vidcontrol -m on" 676.Pp 677start the mouse daemon in the foreground mode, 678.Pp 679.Dl "moused -f -p <selected_port> -t <selected_protocol>" 680.Pp 681and see if the mouse pointer travels correctly 682according to the mouse movement. 683Then try cut & paste features by 684clicking the left, right and middle buttons. 685Type ^C to stop 686the command. 687.Ss Multiple Mice 688As many instances of the mouse daemon as the number of mice attached to 689the system may be run simultaneously; one 690instance for each mouse. 691This is useful if the user wants to use the built-in PS/2 pointing device 692of a laptop computer while on the road, but wants to use a serial 693mouse when s/he attaches the system to the docking station in the office. 694Run two mouse daemons and tell the application program 695(such as the 696.Tn "X\ Window System" ) 697to use 698.Xr sysmouse 4 , 699then the application program will always see mouse data from either mouse. 700When the serial mouse is not attached, the corresponding mouse daemon 701will not detect any movement or button state change and the application 702program will only see mouse data coming from the daemon for the 703PS/2 mouse. 704In contrast when both mice are attached and both of them 705are moved at the same time in this configuration, 706the mouse pointer will travel across the screen just as if movement of 707the mice is combined all together. 708.Sh FILES 709.Bl -tag -width /dev/consolectl -compact 710.It Pa /dev/consolectl 711device to control the console 712.It Pa /dev/psm%d 713PS/2 mouse driver 714.It Pa /dev/sysmouse 715virtualized mouse driver 716.It Pa /dev/ttyv%d 717virtual consoles 718.It Pa /dev/ums%d 719USB mouse driver 720.It Pa /var/run/moused.pid 721process id of the currently running 722.Nm 723utility 724.It Pa /var/run/MouseRemote 725UNIX-domain stream socket for X10 MouseRemote events 726.El 727.Sh EXAMPLES 728.Dl "moused -p /dev/cuau0 -i type" 729.Pp 730Let the 731.Nm 732utility determine the protocol type of the mouse at the serial port 733.Pa /dev/cuau0 . 734If successful, the command will print the type, otherwise it will say 735.Dq Li unknown . 736.Bd -literal -offset indent 737moused -p /dev/cuau0 738vidcontrol -m on 739.Ed 740.Pp 741If the 742.Nm 743utility is able to identify the protocol type of the mouse at the specified 744port automatically, you can start the daemon without the 745.Fl t 746option and enable the mouse pointer in the text console as above. 747.Bd -literal -offset indent 748moused -p /dev/mouse -t microsoft 749vidcontrol -m on 750.Ed 751.Pp 752Start the mouse daemon on the serial port 753.Pa /dev/mouse . 754The protocol type 755.Ar microsoft 756is explicitly specified by the 757.Fl t 758option. 759.Pp 760.Dl "moused -p /dev/mouse -m 1=3 -m 3=1" 761.Pp 762Assign the physical button 3 (right button) to the logical button 1 763(logical left) and the physical button 1 (left) to the logical 764button 3 (logical right). 765This will effectively swap the left and right buttons. 766.Pp 767.Dl "moused -p /dev/mouse -t intellimouse -z 4" 768.Pp 769Report negative Z axis movement (i.e., mouse wheel) as the button 4 pressed 770and positive Z axis movement (i.e., mouse wheel) as the button 5 pressed. 771.Pp 772If you add 773.Pp 774.Dl "ALL ALL = NOPASSWD: /usr/bin/killall -USR1 moused" 775.Pp 776to your 777.Pa /usr/local/etc/sudoers 778file, and bind 779.Pp 780.Dl "killall -USR1 moused" 781.Pp 782to a key in your window manager, you can suspend mouse events on your laptop if 783you keep brushing over the mouse pad while typing. 784.Sh SEE ALSO 785.Xr kill 1 , 786.Xr vidcontrol 1 , 787.Xr xset 1 , 788.Xr keyboard 4 , 789.Xr psm 4 , 790.Xr screen 4 , 791.Xr sysmouse 4 , 792.Xr ums 4 793.Sh STANDARDS 794The 795.Nm 796utility partially supports 797.Dq Plug and Play External COM Device Specification 798in order to support PnP serial mice. 799However, due to various degrees of conformance to the specification by 800existing serial mice, it does not strictly follow the version 1.0 of the 801standard. 802Even with this less strict approach, 803it may not always determine an appropriate protocol type 804for the given serial mouse. 805.Sh HISTORY 806The 807.Nm 808utility first appeared in 809.Fx 2.2 . 810.Sh AUTHORS 811.An -nosplit 812The 813.Nm 814utility was written by 815.An Michael Smith Aq Mt msmith@FreeBSD.org . 816This manual page was written by 817.An Mike Pritchard Aq Mt mpp@FreeBSD.org . 818The command and manual page have since been updated by 819.An Kazutaka Yokota Aq Mt yokota@FreeBSD.org . 820.Sh CAVEATS 821Many pad devices behave as if the first (left) button were pressed if 822the user 823.Dq taps 824the surface of the pad. 825In contrast, some ALPS GlidePoint and Interlink VersaPad models 826treat the tapping action 827as fourth button events. 828Use the option 829.Dq Fl m Li 1=4 830for these models 831to obtain the same effect as the other pad devices. 832.Pp 833Cut and paste functions in the virtual console assume that there 834are three buttons on the mouse. 835The logical button 1 (logical left) selects a region of text in the 836console and copies it to the cut buffer. 837The logical button 3 (logical right) extends the selected region. 838The logical button 2 (logical middle) pastes the selected text 839at the text cursor position. 840If the mouse has only two buttons, the middle, `paste' button 841is not available. 842To obtain the paste function, use the 843.Fl 3 844option to emulate the middle button, or use the 845.Fl m 846option to assign the physical right button to the logical middle button: 847.Dq Fl m Li 2=3 . 848