xref: /freebsd/usr.sbin/mlxcontrol/mlxcontrol.8 (revision 0b3105a37d7adcadcb720112fed4dc4e8040be99)
1.\"
2.\" Copyright (c) 2000 Michael Smith
3.\" All rights reserved.
4.\"
5.\" Redistribution and use in source and binary forms, with or without
6.\" modification, are permitted provided that the following conditions
7.\" are met:
8.\" 1. Redistributions of source code must retain the above copyright
9.\"    notice, this list of conditions and the following disclaimer.
10.\" 2. The name of the author may not be used to endorse or promote products
11.\"    derived from this software without specific prior written permission
12.\"
13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23.\"
24.\" $FreeBSD$
25.\"
26.Dd April 10, 2000
27.Dt MLXCONTROL 8
28.Os
29.Sh NAME
30.Nm mlxcontrol
31.Nd Mylex DAC-family RAID management utility
32.Sh SYNOPSIS
33.Nm
34.Aq command
35.Op args
36.Nm
37status
38.Op Fl qv
39.Op Ar drive
40.Nm
41rescan
42.Ar controller
43.Op Ar controller ...
44.Nm
45detach
46.Ar drive
47.Op Ar drive ...
48.Nm
49detach
50.Fl a
51.Nm
52check
53.Ar drive
54.Nm
55config
56.Ar controller
57.Nm
58help
59.Ar command
60.Sh DESCRIPTION
61The
62.Nm
63utility provides status monitoring and management functions
64for devices attached
65to the
66.Xr mlx 4
67driver.
68.Pp
69Controller names are of the form "mlxN"
70where N is the unit number of the controller.
71Drive names are of the form "mlxdN"
72where N is the unit number of the drive.
73Do not specify the path to a device node.
74.Bl -tag -width rebuild
75.It status
76Print the status of controllers and system drives.
77If one or more drives are specified,
78only print information about these drives,
79otherwise print information
80about all controllers and drives in the system.
81With the
82.Fl v
83flag, display much more verbose information.
84With the
85.Fl q
86flag, do not print any output.
87This command returns
880 if all drives tested are online,
891 if one or more drives are critical and
902 if one or more are offline.
91.It rescan
92Rescan one or more controllers for non-attached system drives
93(e.g.\& drives that have been
94detached or created subsequent to driver initialisation).
95If the
96.Fl a
97flag is supplied, rescan all controllers in the system.
98.It detach
99Detach one or more system drives.
100Drives must be unmounted
101and not opened by any other utility for this command to succeed.
102If the
103.Fl a
104flag is supplied, detach all system drives from the nominated controller.
105.It check
106Initiate a consistency check and repair pass on a redundant system drive
107(e.g.\& RAID1 or RAID5).
108The controller will scan the system drive and repair any inconsistencies.
109This command returns immediately;
110use the
111.Ar status
112command to monitor the progress of the check.
113.It rebuild
114Requires two arguments,
115.Ar controller
116and
117.Ar physdrive
118as specified in the
119output of the
120.Ar status
121command.
122All system drives using space on the physical drive
123.Ar physdrive
124are rebuilt, reconstructing all data on the drive.
125Note that each controller can only perform one rebuild at a time.
126This command returns immediately; use the
127.Ar status
128command to monitor the progress of the rebuild.
129.It config
130Print the current configuration from the nominated controller.
131This command will be updated
132to allow addition/deletion of system drives from a configuration
133in a future release.
134.It help
135Print usage information for
136.Ar command .
137.El
138.Sh AUTHORS
139The
140.Nm
141utility was written by
142.An Michael Smith Aq Mt msmith@FreeBSD.org .
143.Sh BUGS
144The
145.Ar config
146command does not yet support modifying system drive configuration.
147.Pp
148Error log extraction is not yet supported.
149