1.\" 2.\" Copyright (c) 2018, 2019 Mellanox Technologies 3.\" All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 14.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24.\" SUCH DAMAGE. 25.\" 26.Dd May 7, 2019 27.Dt mlx5tool 8 28.Os 29.Sh NAME 30.Nm mlx5tool 31.Nd Utility for managing Connect-X 4/5/6 Mellanox network adapters 32.Sh SYNOPSIS 33.Nm 34.Fl d Ar domain:bus:slot:func 35.Fl E 36.Nm 37.Fl d Ar domain:bus:slot:func 38.Fl e 39.Nm 40.Fl d Ar domain:bus:slot:func 41.Fl f Ar file.mfa2 42.Nm 43.Fl d Ar domain:bus:slot:func 44.Fl o Ar file 45.Fl w 46.Nm 47.Fl d Ar domain:bus:slot:func 48.Fl r 49.Nm 50.Fl d Ar domain:bus:slot:func 51.Fl z 52.Sh DESCRIPTION 53The 54.Nm 55utility is provided for management of the Connect-X4, 5 and 6 network adapters 56in the aspects not covered by the generic 57.Xr ifconfig 8 58command, mostly related to the PCIe attachment and internal card working. 59The utility executes commands on specific adapter, which is addressed using 60.Em device:bus:slot:function 61conventions of the PCIe buses. 62You can match adapters ethernet name and addresses using the 63.X pciconf 8 64utility. 65The address is passed as an argument of the 66.Fl d 67option, which must be specified for each invocation. 68.Pp 69When the driver detects the malfunctioning of the hardware, or by user 70request, it is possible to create 71.Em firmware dump , 72which contains debugging information about internal device state, for 73analysis of the failure by the Mellanox support team. 74.Pp 75The following commands are currently implemented: 76.Bl -tag -width indent 77.It Fl E 78Print EEPROM information 79.It Fl e 80Take the snapshot of the firmware registers state and store it in the 81kernel buffer. 82The buffer must be empty, in other words, no dumps should be written so 83far, or existing dump cleared with the 84.It Fl f 85Flashes the firmware image 86.Fa file.mfa2 87to the specified adapter. 88Image must be in MFA2 pack format and contain a component suitable 89for the adapter hardware. 90.Pp 91Typically, PCIe link-level reset is required to activate the 92newly flashed image, which can be performed by the system reboot 93or using the 94.Fl z 95option. 96.Fl r 97command for the specified device. 98.It Fl r 99Clear the stored firmware dump, preparing the kernel buffer for 100the next dump. 101.It Fl w 102Fetches the stored firmware dump and writes it into the file specified 103by the 104.Fl o 105option argument. 106.It Fl z 107Performs PCIe link-level reset on the specified device. 108.El 109.Sh FILES 110The 111.Pa /dev/mlx5ctl 112.Xr devfs 4 113node is used to pass commands to the driver. 114.Sh SEE ALSO 115.Xr mlx5en 4 , 116.Xr mlx5ib 4 , 117.Xr mlx5io 4 , 118.Xr ifconfig 8 119and 120.Xr pciconf 8 . 121