xref: /freebsd/usr.sbin/mfiutil/mfiutil.c (revision 123af6ec70016f5556da5972d4d63c7d175c06d3)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 2008, 2009 Yahoo!, Inc.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The names of the authors may not be used to endorse or promote
16  *    products derived from this software without specific prior written
17  *    permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  * $FreeBSD$
32  */
33 
34 #include <sys/errno.h>
35 #include <err.h>
36 #include <stdio.h>
37 #include <stdlib.h>
38 #include <string.h>
39 #include <unistd.h>
40 #include "mfiutil.h"
41 
42 SET_DECLARE(MFI_DATASET(top), struct mfiutil_command);
43 
44 MFI_TABLE(top, start);
45 MFI_TABLE(top, stop);
46 MFI_TABLE(top, abort);
47 
48 int mfi_unit;
49 u_int mfi_opts;
50 static int fw_name_width, fw_version_width, fw_date_width, fw_time_width;
51 
52 static void
53 usage(void)
54 {
55 
56 	fprintf(stderr, "usage: mfiutil [-de] [-u unit] <command> ...\n\n");
57 	fprintf(stderr, "Commands include:\n");
58 	fprintf(stderr, "    version\n");
59 	fprintf(stderr, "    show adapter              - display controller information\n");
60 	fprintf(stderr, "    show battery              - display battery information\n");
61 	fprintf(stderr, "    show config               - display RAID configuration\n");
62 	fprintf(stderr, "    show drives               - list physical drives\n");
63 	fprintf(stderr, "    show events               - display event log\n");
64 	fprintf(stderr, "    show firmware             - list firmware images\n");
65 	fprintf(stderr, "    show foreign              - display detected foreign volumes\n");
66 	fprintf(stderr, "    show logstate             - display event log sequence numbers\n");
67 	fprintf(stderr, "    show volumes              - list logical volumes\n");
68 	fprintf(stderr, "    show patrol               - display patrol read status\n");
69 	fprintf(stderr, "    show progress             - display status of active operations\n");
70 	fprintf(stderr, "    fail <drive>              - fail a physical drive\n");
71 	fprintf(stderr, "    good <drive>              - set a failed/SYSPD drive as UNCONFIGURED\n");
72 	fprintf(stderr, "    rebuild <drive>           - mark failed drive ready for rebuild\n");
73 	fprintf(stderr, "    syspd <drive>             - set drive into use as SYSPD JBOD\n");
74 	fprintf(stderr, "    drive progress <drive>    - display status of active operations\n");
75 	fprintf(stderr, "    drive clear <drive> <start|stop> - clear a drive with all 0x00\n");
76 	fprintf(stderr, "    start rebuild <drive>\n");
77 	fprintf(stderr, "    abort rebuild <drive>\n");
78 	fprintf(stderr, "    locate <drive> <on|off>   - toggle drive LED\n");
79 	fprintf(stderr, "    cache <volume> [command [setting]]\n");
80 	fprintf(stderr, "    name <volume> <name>\n");
81 	fprintf(stderr, "    volume progress <volume>  - display status of active operations\n");
82 	fprintf(stderr, "    clear                     - clear volume configuration\n");
83 	fprintf(stderr, "    create <type> [-v] [-s stripe_size] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]\n");
84 	fprintf(stderr, "    delete <volume>\n");
85 	fprintf(stderr, "    add <drive> [volume]      - add a hot spare\n");
86 	fprintf(stderr, "    remove <drive>            - remove a hot spare\n");
87 	fprintf(stderr, "    patrol <disable|auto|manual> [interval [start]]\n");
88 	fprintf(stderr, "    start patrol              - start a patrol read\n");
89 	fprintf(stderr, "    stop patrol               - stop a patrol read\n");
90 	fprintf(stderr, "    foreign scan              - scan for foreign configurations\n");
91 	fprintf(stderr, "    foreign clear [volume]    - clear foreign configurations (default all)\n");
92 	fprintf(stderr, "    foreign diag [volume]     - diagnostic display foreign configurations (default all)\n");
93 	fprintf(stderr, "    foreign preview [volume]  - preview foreign configurations (default all)\n");
94 	fprintf(stderr, "    foreign import [volume]   - import foreign configurations (default all)\n");
95 	fprintf(stderr, "    flash <firmware>\n");
96 	fprintf(stderr, "    start learn               - start a BBU relearn\n");
97 	fprintf(stderr, "    bbu <setting> <value>     - set BBU properties\n");
98 	fprintf(stderr, "    ctrlprop rebuild [rate]   - get/set the volume rebuild rate\n");
99 	fprintf(stderr, "    ctrlprop alarm [0/1]      - enable/disable controller alarms\n");
100 #ifdef DEBUG
101 	fprintf(stderr, "    debug                     - debug 'show config'\n");
102 	fprintf(stderr, "    dump                      - display 'saved' config\n");
103 #endif
104 	exit(1);
105 }
106 
107 static int
108 version(int ac __unused, char **av __unused)
109 {
110 
111 	printf("mfiutil version 1.0.15");
112 #ifdef DEBUG
113 	printf(" (DEBUG)");
114 #endif
115 	printf("\n");
116 	return (0);
117 }
118 MFI_COMMAND(top, version, version);
119 
120 int
121 main(int ac, char **av)
122 {
123 	struct mfiutil_command **cmd;
124 	int ch;
125 
126 	while ((ch = getopt(ac, av, "deu:")) != -1) {
127 		switch (ch) {
128 		case 'd':
129 			mfi_opts |= MFI_DNAME_DEVICE_ID;
130 			break;
131 		case 'e':
132 			mfi_opts |= MFI_DNAME_ES;
133 			break;
134 		case 'u':
135 			mfi_unit = atoi(optarg);
136 			break;
137 		case '?':
138 			usage();
139 		}
140 	}
141 
142 	av += optind;
143 	ac -= optind;
144 
145 	/* getopt() eats av[0], so we can't use mfi_table_handler() directly. */
146 	if (ac == 0)
147 		usage();
148 
149 	SET_FOREACH(cmd, MFI_DATASET(top)) {
150 		if (strcmp((*cmd)->name, av[0]) == 0) {
151 			if ((*cmd)->handler(ac, av))
152 				return (1);
153 			else
154 				return (0);
155 		}
156 	}
157 	warnx("Unknown command %s.", av[0]);
158 	return (1);
159 }
160 
161 void
162 scan_firmware(struct mfi_info_component *comp)
163 {
164 	int len;
165 
166 	len = strlen(comp->name);
167 	if (fw_name_width < len)
168 		fw_name_width = len;
169 	len = strlen(comp->version);
170 	if (fw_version_width < len)
171 		fw_version_width = len;
172 	len = strlen(comp->build_date);
173 	if (fw_date_width < len)
174 		fw_date_width = len;
175 	len = strlen(comp->build_time);
176 	if (fw_time_width < len)
177 		fw_time_width = len;
178 }
179 
180 void
181 display_firmware(struct mfi_info_component *comp, const char *tag)
182 {
183 
184 	printf("%-*s  %-*s  %-*s  %-*s  %s\n", fw_name_width, comp->name,
185 	    fw_version_width, comp->version, fw_date_width, comp->build_date,
186 	    fw_time_width, comp->build_time, tag);
187 }
188