1 2# 3# This enables a simple local "raw" printer, hooked up to the first 4# parallel port. No kind of filtering is done, so everything you pass 5# to the "lpr" command will be printed unmodified. 6# 7# Remember, for further print queues you're going to add, you have 8# to choose different spool directories (the "sd" capability below), 9# otherwise you will greatly confuse lpd. 10# 11# For some advanced printing, have a look at the "apsfilter" package. 12# It plugs into the lpd system, allowing you to print a variety of 13# different file types by converting everything to PostScript(tm) 14# format. For more information about apsfilter visit 15# 16# http://www.apsfilter.org/ 17# 18# If you don't have a PostScript(tm) printer, don't panic, but do 19# also install the latest "ghostscript" package for best printer support. 20# 21# Do also refer to the "printing" section of the handbook. 22# 23# https://docs.freebsd.org/en/books/handbook/printing/ 24# 25# A local copy can be found under 26# 27# /usr/share/doc/handbook/handbook.{html,latin1}. 28# 29# Banner pages are now suppressed by default. Remove the :sh: capability 30# to turn them back on. 31# 32#lp|local line printer:\ 33# :sh:\ 34# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: 35# 36# Sample remote printer. The physical printer is on machine "lphost". 37# You can perform any kind of local filtering directly. If you need 38# local filters (e.g. LF -> CR-LF conversion for HP printers), create 39# a filter script that sends the proper escape sequence to the printer 40# and then concatenates stdin to stdout. 41# 42#remote|sample remote printer:\ 43# :sh:\ 44# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\ 45# :if=/usr/local/libexec/if-script: 46# 47# Simple Russian printer with hardware CP866 character set, output filter 48# used for KOI8-R -> CP866 conversion 49# 50#lp|Russian local line printer:\ 51# :sh:of=/usr/libexec/lpr/ru/koi2alt:\ 52# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: 53