1 /*- 2 * Copyright (C) 2008-2009 Semihalf, Michal Hajduk and Bartlomiej Sieka 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <err.h> 31 #include <errno.h> 32 #include <sysexits.h> 33 #include <fcntl.h> 34 #include <stdio.h> 35 #include <stdlib.h> 36 #include <string.h> 37 #include <stdarg.h> 38 #include <unistd.h> 39 #include <sys/ioctl.h> 40 41 #include <dev/iicbus/iic.h> 42 43 #define I2C_DEV "/dev/iic0" 44 #define I2C_MODE_NOTSET 0 45 #define I2C_MODE_NONE 1 46 #define I2C_MODE_STOP_START 2 47 #define I2C_MODE_REPEATED_START 3 48 49 struct options { 50 int width; 51 int count; 52 int verbose; 53 int addr_set; 54 int binary; 55 int scan; 56 int skip; 57 int reset; 58 int mode; 59 char dir; 60 uint32_t addr; 61 uint32_t off; 62 }; 63 64 struct skip_range { 65 int start; 66 int end; 67 }; 68 69 __dead2 static void 70 usage(void) 71 { 72 73 fprintf(stderr, "usage: %s -a addr [-f device] [-d [r|w]] [-o offset] " 74 "[-w [0|8|16]] [-c count] [-m [ss|rs|no]] [-b] [-v]\n", 75 getprogname()); 76 fprintf(stderr, " %s -s [-f device] [-n skip_addr] -v\n", 77 getprogname()); 78 fprintf(stderr, " %s -r [-f device] -v\n", getprogname()); 79 exit(EX_USAGE); 80 } 81 82 static struct skip_range 83 skip_get_range(char *skip_addr) 84 { 85 struct skip_range addr_range; 86 char *token; 87 88 addr_range.start = 0; 89 addr_range.end = 0; 90 91 token = strsep(&skip_addr, ".."); 92 if (token) { 93 addr_range.start = strtoul(token, 0, 16); 94 token = strsep(&skip_addr, ".."); 95 if ((token != NULL) && !atoi(token)) { 96 token = strsep(&skip_addr, ".."); 97 if (token) 98 addr_range.end = strtoul(token, 0, 16); 99 } 100 } 101 102 return (addr_range); 103 } 104 105 /* Parse the string to get hex 7 bits addresses */ 106 static int 107 skip_get_tokens(char *skip_addr, int *sk_addr, int max_index) 108 { 109 char *token; 110 int i; 111 112 for (i = 0; i < max_index; i++) { 113 token = strsep(&skip_addr, ":"); 114 if (token == NULL) 115 break; 116 sk_addr[i] = strtoul(token, 0, 16); 117 } 118 return (i); 119 } 120 121 static int 122 scan_bus(struct iiccmd cmd, char *dev, int skip, char *skip_addr) 123 { 124 struct skip_range addr_range = { 0, 0 }; 125 int *tokens, fd, error, i, index, j; 126 int len = 0, do_skip = 0, no_range = 1; 127 128 fd = open(dev, O_RDWR); 129 if (fd == -1) { 130 fprintf(stderr, "Error opening I2C controller (%s) for " 131 "scanning: %s\n", dev, strerror(errno)); 132 return (EX_NOINPUT); 133 } 134 135 if (skip) { 136 len = strlen(skip_addr); 137 if (strstr(skip_addr, "..") != NULL) { 138 addr_range = skip_get_range(skip_addr); 139 no_range = 0; 140 } else { 141 tokens = (int *)malloc((len / 2 + 1) * sizeof(int)); 142 if (tokens == NULL) { 143 fprintf(stderr, "Error allocating tokens " 144 "buffer\n"); 145 goto out; 146 } 147 index = skip_get_tokens(skip_addr, tokens, 148 len / 2 + 1); 149 } 150 151 if (!no_range && (addr_range.start > addr_range.end)) { 152 fprintf(stderr, "Skip address out of range\n"); 153 goto out; 154 } 155 } 156 157 printf("Scanning I2C devices on %s: ", dev); 158 for (i = 1; i < 127; i++) { 159 160 if (skip && ( addr_range.start < addr_range.end)) { 161 if (i >= addr_range.start && i <= addr_range.end) 162 continue; 163 164 } else if (skip && no_range) 165 for (j = 0; j < index; j++) { 166 if (tokens[j] == i) { 167 do_skip = 1; 168 break; 169 } 170 } 171 172 if (do_skip) { 173 do_skip = 0; 174 continue; 175 } 176 177 cmd.slave = i << 1; 178 cmd.last = 1; 179 cmd.count = 0; 180 error = ioctl(fd, I2CRSTCARD, &cmd); 181 if (error) 182 goto out; 183 184 cmd.slave = i << 1; 185 cmd.last = 1; 186 error = ioctl(fd, I2CSTART, &cmd); 187 if (!error) 188 printf("%x ", i); 189 cmd.slave = i << 1; 190 cmd.last = 1; 191 error = ioctl(fd, I2CSTOP, &cmd); 192 } 193 printf("\n"); 194 195 error = ioctl(fd, I2CRSTCARD, &cmd); 196 out: 197 close(fd); 198 if (skip && no_range) 199 free(tokens); 200 201 if (error) { 202 fprintf(stderr, "Error scanning I2C controller (%s): %s\n", 203 dev, strerror(errno)); 204 return (EX_NOINPUT); 205 } else 206 return (EX_OK); 207 } 208 209 static int 210 reset_bus(struct iiccmd cmd, char *dev) 211 { 212 int fd, error; 213 214 fd = open(dev, O_RDWR); 215 if (fd == -1) { 216 fprintf(stderr, "Error opening I2C controller (%s) for " 217 "resetting: %s\n", dev, strerror(errno)); 218 return (EX_NOINPUT); 219 } 220 221 printf("Resetting I2C controller on %s: ", dev); 222 error = ioctl(fd, I2CRSTCARD, &cmd); 223 close (fd); 224 225 if (error) { 226 printf("error: %s\n", strerror(errno)); 227 return (EX_IOERR); 228 } else { 229 printf("OK\n"); 230 return (EX_OK); 231 } 232 } 233 234 static char * 235 prepare_buf(int size, uint32_t off) 236 { 237 char *buf; 238 239 buf = malloc(size); 240 if (buf == NULL) 241 return (buf); 242 243 if (size == 1) 244 buf[0] = off & 0xff; 245 else if (size == 2) { 246 buf[0] = (off >> 8) & 0xff; 247 buf[1] = off & 0xff; 248 } 249 250 return (buf); 251 } 252 253 static int 254 i2c_write(char *dev, struct options i2c_opt, char *i2c_buf) 255 { 256 struct iiccmd cmd; 257 int ch, i, error, fd, bufsize; 258 char *err_msg, *buf; 259 260 /* 261 * Read data to be written to the chip from stdin 262 */ 263 if (i2c_opt.verbose && !i2c_opt.binary) 264 fprintf(stderr, "Enter %u bytes of data: ", i2c_opt.count); 265 266 for (i = 0; i < i2c_opt.count; i++) { 267 ch = getchar(); 268 if (ch == EOF) { 269 free(i2c_buf); 270 err(1, "not enough data, exiting\n"); 271 } 272 i2c_buf[i] = ch; 273 } 274 275 fd = open(dev, O_RDWR); 276 if (fd == -1) { 277 free(i2c_buf); 278 err(1, "open failed"); 279 } 280 281 /* 282 * Write offset where the data will go 283 */ 284 cmd.slave = i2c_opt.addr; 285 error = ioctl(fd, I2CSTART, &cmd); 286 if (error == -1) { 287 err_msg = "ioctl: error sending start condition"; 288 goto err1; 289 } 290 291 if (i2c_opt.width) { 292 bufsize = i2c_opt.width / 8; 293 buf = prepare_buf(bufsize, i2c_opt.off); 294 if (buf == NULL) { 295 err_msg = "error: offset malloc"; 296 goto err1; 297 } 298 299 cmd.count = bufsize; 300 cmd.buf = buf; 301 error = ioctl(fd, I2CWRITE, &cmd); 302 free(buf); 303 if (error == -1) { 304 err_msg = "ioctl: error when write offset"; 305 goto err1; 306 } 307 } 308 309 /* Mode - stop start */ 310 if (i2c_opt.mode == I2C_MODE_STOP_START) { 311 cmd.slave = i2c_opt.addr; 312 error = ioctl(fd, I2CSTOP, &cmd); 313 if (error == -1) { 314 err_msg = "ioctl: error sending stop condition"; 315 goto err2; 316 } 317 cmd.slave = i2c_opt.addr; 318 error = ioctl(fd, I2CSTART, &cmd); 319 if (error == -1) { 320 err_msg = "ioctl: error sending start condition"; 321 goto err1; 322 } 323 } 324 /* Mode - repeated start */ 325 if (i2c_opt.mode == I2C_MODE_REPEATED_START) { 326 cmd.slave = i2c_opt.addr; 327 error = ioctl(fd, I2CRPTSTART, &cmd); 328 if (error == -1) { 329 err_msg = "ioctl: error sending repeated start " 330 "condition"; 331 goto err1; 332 } 333 } 334 335 /* 336 * Write the data 337 */ 338 cmd.count = i2c_opt.count; 339 cmd.buf = i2c_buf; 340 cmd.last = 0; 341 error = ioctl(fd, I2CWRITE, &cmd); 342 if (error == -1) { 343 err_msg = "ioctl: error when write"; 344 goto err1; 345 } 346 cmd.slave = i2c_opt.addr; 347 error = ioctl(fd, I2CSTOP, &cmd); 348 if (error == -1) { 349 err_msg = "ioctl: error sending stop condition"; 350 goto err2; 351 } 352 353 close(fd); 354 return (0); 355 356 err1: 357 cmd.slave = i2c_opt.addr; 358 error = ioctl(fd, I2CSTOP, &cmd); 359 if (error == -1) 360 fprintf(stderr, "error sending stop condtion\n"); 361 err2: 362 if (err_msg) 363 fprintf(stderr, "%s", err_msg); 364 365 close(fd); 366 return (1); 367 } 368 369 static int 370 i2c_read(char *dev, struct options i2c_opt, char *i2c_buf) 371 { 372 struct iiccmd cmd; 373 int i, fd, error, bufsize; 374 char *err_msg, data = 0, *buf; 375 376 fd = open(dev, O_RDWR); 377 if (fd == -1) 378 err(1, "open failed"); 379 380 bzero(&cmd, sizeof(cmd)); 381 382 if (i2c_opt.width) { 383 cmd.slave = i2c_opt.addr; 384 cmd.count = 1; 385 cmd.last = 0; 386 cmd.buf = &data; 387 error = ioctl(fd, I2CSTART, &cmd); 388 if (error == -1) { 389 err_msg = "ioctl: error sending start condition"; 390 goto err1; 391 } 392 bufsize = i2c_opt.width / 8; 393 buf = prepare_buf(bufsize, i2c_opt.off); 394 if (buf == NULL) { 395 err_msg = "error: offset malloc"; 396 goto err1; 397 } 398 399 cmd.count = bufsize; 400 cmd.buf = buf; 401 cmd.last = 0; 402 error = ioctl(fd, I2CWRITE, &cmd); 403 free(buf); 404 if (error == -1) { 405 err_msg = "ioctl: error when write offset"; 406 goto err1; 407 } 408 409 if (i2c_opt.mode == I2C_MODE_STOP_START) { 410 cmd.slave = i2c_opt.addr; 411 error = ioctl(fd, I2CSTOP, &cmd); 412 if (error == -1) 413 goto err2; 414 } 415 } 416 cmd.slave = i2c_opt.addr; 417 cmd.count = 1; 418 cmd.last = 0; 419 cmd.buf = &data; 420 if (i2c_opt.mode == I2C_MODE_STOP_START) { 421 error = ioctl(fd, I2CSTART, &cmd); 422 if (error == -1) { 423 err_msg = "ioctl: error sending start condition"; 424 goto err1; 425 } 426 } else if (i2c_opt.mode == I2C_MODE_REPEATED_START) { 427 error = ioctl(fd, I2CRPTSTART, &cmd); 428 if (error == -1) { 429 err_msg = "ioctl: error sending repeated start " 430 "condition"; 431 goto err1; 432 } 433 } 434 error = ioctl(fd, I2CSTOP, &cmd); 435 if (error == -1) 436 goto err2; 437 438 for (i = 0; i < i2c_opt.count; i++) { 439 error = read(fd, &i2c_buf[i], 1); 440 if (error == -1) { 441 err_msg = "ioctl: error while reading"; 442 goto err1; 443 } 444 } 445 446 close(fd); 447 return (0); 448 449 err1: 450 cmd.slave = i2c_opt.addr; 451 error = ioctl(fd, I2CSTOP, &cmd); 452 if (error == -1) 453 fprintf(stderr, "error sending stop condtion\n"); 454 err2: 455 if (err_msg) 456 fprintf(stderr, "%s", err_msg); 457 458 close(fd); 459 return (1); 460 } 461 462 int 463 main(int argc, char** argv) 464 { 465 struct iiccmd cmd; 466 struct options i2c_opt; 467 char *dev, *skip_addr, *i2c_buf; 468 int error, chunk_size, i, j, ch; 469 470 errno = 0; 471 error = 0; 472 473 /* Line-break the output every chunk_size bytes */ 474 chunk_size = 16; 475 476 dev = I2C_DEV; 477 478 /* Default values */ 479 i2c_opt.addr_set = 0; 480 i2c_opt.off = 0; 481 i2c_opt.verbose = 0; 482 i2c_opt.dir = 'r'; /* direction = read */ 483 i2c_opt.width = 8; 484 i2c_opt.count = 1; 485 i2c_opt.binary = 0; /* ASCII text output */ 486 i2c_opt.scan = 0; /* no bus scan */ 487 i2c_opt.skip = 0; /* scan all addresses */ 488 i2c_opt.reset = 0; /* no bus reset */ 489 i2c_opt.mode = I2C_MODE_NOTSET; 490 491 while ((ch = getopt(argc, argv, "a:f:d:o:w:c:m:n:sbvrh")) != -1) { 492 switch(ch) { 493 case 'a': 494 i2c_opt.addr = (strtoul(optarg, 0, 16) << 1); 495 if (i2c_opt.addr == 0 && errno == EINVAL) 496 i2c_opt.addr_set = 0; 497 else 498 i2c_opt.addr_set = 1; 499 break; 500 case 'f': 501 dev = optarg; 502 break; 503 case 'd': 504 i2c_opt.dir = optarg[0]; 505 break; 506 case 'o': 507 i2c_opt.off = strtoul(optarg, 0, 16); 508 if (i2c_opt.off == 0 && errno == EINVAL) 509 error = 1; 510 break; 511 case 'w': 512 i2c_opt.width = atoi(optarg); 513 break; 514 case 'c': 515 i2c_opt.count = atoi(optarg); 516 break; 517 case 'm': 518 if (!strcmp(optarg, "no")) 519 i2c_opt.mode = I2C_MODE_NONE; 520 else if (!strcmp(optarg, "ss")) 521 i2c_opt.mode = I2C_MODE_STOP_START; 522 else if (!strcmp(optarg, "rs")) 523 i2c_opt.mode = I2C_MODE_REPEATED_START; 524 else 525 usage(); 526 break; 527 case 'n': 528 i2c_opt.skip = 1; 529 skip_addr = optarg; 530 break; 531 case 's': 532 i2c_opt.scan = 1; 533 break; 534 case 'b': 535 i2c_opt.binary = 1; 536 break; 537 case 'v': 538 i2c_opt.verbose = 1; 539 break; 540 case 'r': 541 i2c_opt.reset = 1; 542 break; 543 case 'h': 544 default: 545 usage(); 546 } 547 } 548 argc -= optind; 549 argv += optind; 550 551 /* Set default mode if option -m is not specified */ 552 if (i2c_opt.mode == I2C_MODE_NOTSET) { 553 if (i2c_opt.dir == 'r') 554 i2c_opt.mode = I2C_MODE_STOP_START; 555 else if (i2c_opt.dir == 'w') 556 i2c_opt.mode = I2C_MODE_NONE; 557 } 558 559 /* Basic sanity check of command line arguments */ 560 if (i2c_opt.scan) { 561 if (i2c_opt.addr_set) 562 usage(); 563 } else if (i2c_opt.reset) { 564 if (i2c_opt.addr_set) 565 usage(); 566 } else if (error) { 567 usage(); 568 } else if ((i2c_opt.dir == 'r' || i2c_opt.dir == 'w')) { 569 if ((i2c_opt.addr_set == 0) || 570 !(i2c_opt.width == 0 || i2c_opt.width == 8 || 571 i2c_opt.width == 16)) 572 usage(); 573 } 574 575 if (i2c_opt.verbose) 576 fprintf(stderr, "dev: %s, addr: 0x%x, r/w: %c, " 577 "offset: 0x%02x, width: %u, count: %u\n", dev, 578 i2c_opt.addr >> 1, i2c_opt.dir, i2c_opt.off, 579 i2c_opt.width, i2c_opt.count); 580 581 if (i2c_opt.scan) 582 exit(scan_bus(cmd, dev, i2c_opt.skip, skip_addr)); 583 584 if (i2c_opt.reset) 585 exit(reset_bus(cmd, dev)); 586 587 i2c_buf = malloc(i2c_opt.count); 588 if (i2c_buf == NULL) 589 err(1, "data malloc"); 590 591 if (i2c_opt.dir == 'w') { 592 error = i2c_write(dev, i2c_opt, i2c_buf); 593 if (error) { 594 free(i2c_buf); 595 return (1); 596 } 597 } 598 if (i2c_opt.dir == 'r') { 599 error = i2c_read(dev, i2c_opt, i2c_buf); 600 if (error) { 601 free(i2c_buf); 602 return (1); 603 } 604 } 605 606 if (i2c_opt.verbose) 607 fprintf(stderr, "\nData %s (hex):\n", i2c_opt.dir == 'r' ? 608 "read" : "written"); 609 610 i = 0; 611 j = 0; 612 while (i < i2c_opt.count) { 613 if (i2c_opt.verbose || (i2c_opt.dir == 'r' && 614 !i2c_opt.binary)) 615 fprintf (stderr, "%02hhx ", i2c_buf[i++]); 616 617 if (i2c_opt.dir == 'r' && i2c_opt.binary) { 618 fprintf(stdout, "%c", i2c_buf[j++]); 619 if(!i2c_opt.verbose) 620 i++; 621 } 622 if (!i2c_opt.verbose && (i2c_opt.dir == 'w')) 623 break; 624 if ((i % chunk_size) == 0) 625 fprintf(stderr, "\n"); 626 } 627 if ((i % chunk_size) != 0) 628 fprintf(stderr, "\n"); 629 630 free(i2c_buf); 631 return (0); 632 } 633