1 /* 2 * Copyright (C) 2002 3 * Hidetoshi Shimokawa. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * 16 * This product includes software developed by Hidetoshi Shimokawa. 17 * 18 * 4. Neither the name of the author nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 #if defined(__FreeBSD__) 36 #include <sys/cdefs.h> 37 __FBSDID("$FreeBSD$"); 38 #endif 39 40 #include <sys/param.h> 41 #include <sys/malloc.h> 42 #include <sys/types.h> 43 #include <sys/sysctl.h> 44 #include <sys/socket.h> 45 #include <sys/ioctl.h> 46 #include <sys/errno.h> 47 #if defined(__FreeBSD__) 48 #include <sys/eui64.h> 49 #include <dev/firewire/firewire.h> 50 #include <dev/firewire/iec13213.h> 51 #include <dev/firewire/fwphyreg.h> 52 #include <dev/firewire/iec68113.h> 53 #elif defined(__NetBSD__) 54 #include "eui64.h" 55 #include <dev/ieee1394/firewire.h> 56 #include <dev/ieee1394/iec13213.h> 57 #include <dev/ieee1394/fwphyreg.h> 58 #include <dev/ieee1394/iec68113.h> 59 #else 60 #warning "You need to add support for your OS" 61 #endif 62 63 64 #include <netinet/in.h> 65 #include <fcntl.h> 66 #include <stdio.h> 67 #include <err.h> 68 #include <stdlib.h> 69 #include <string.h> 70 #include <sysexits.h> 71 #include <unistd.h> 72 #include <stdint.h> 73 #include <stdbool.h> 74 #include "fwmethods.h" 75 76 static void sysctl_set_int(const char *, int); 77 78 static void 79 usage(void) 80 { 81 fprintf(stderr, 82 "%s [-u bus_num] [-prt] [-c node] [-d node] [-o node] [-s node]\n" 83 "\t [-l file] [-g gap_count] [-f force_root ] [-b pri_req]\n" 84 "\t [-M mode] [-R filename] [-S filename] [-m EUI64 | hostname]\n" 85 "\t-u: specify bus number\n" 86 "\t-p: Display current PHY register settings\n" 87 "\t-r: bus reset\n" 88 "\t-t: read topology map\n" 89 "\t-c: read configuration ROM\n" 90 "\t-d: hex dump of configuration ROM\n" 91 "\t-o: send link-on packet to the node\n" 92 "\t-s: write RESET_START register on the node\n" 93 "\t-l: load and parse hex dump file of configuration ROM\n" 94 "\t-g: set gap count\n" 95 "\t-f: force root node\n" 96 "\t-b: set PRIORITY_BUDGET register on all supported nodes\n" 97 "\t-M: specify dv or mpeg\n" 98 "\t-R: Receive DV or MPEG TS stream\n" 99 "\t-S: Send DV stream\n" 100 "\t-m: set fwmem target\n" 101 , getprogname() ); 102 fprintf(stderr, "\n"); 103 } 104 105 static void 106 fweui2eui64(const struct fw_eui64 *fweui, struct eui64 *eui) 107 { 108 *(u_int32_t*)&(eui->octet[0]) = htonl(fweui->hi); 109 *(u_int32_t*)&(eui->octet[4]) = htonl(fweui->lo); 110 } 111 112 static void 113 get_dev(int fd, struct fw_devlstreq *data) 114 { 115 if (data == NULL) 116 err(EX_SOFTWARE, "%s: data malloc", __func__); 117 if( ioctl(fd, FW_GDEVLST, data) < 0) { 118 err(EX_IOERR, "%s: ioctl", __func__); 119 } 120 } 121 122 static int 123 str2node(int fd, const char *nodestr) 124 { 125 struct eui64 eui, tmpeui; 126 struct fw_devlstreq *data; 127 char *endptr; 128 int i, node; 129 130 if (nodestr == '\0') 131 return (-1); 132 133 /* 134 * Deal with classic node specifications. 135 */ 136 node = strtol(nodestr, &endptr, 0); 137 if (*endptr == '\0') 138 goto gotnode; 139 140 /* 141 * Try to get an eui and match it against available nodes. 142 */ 143 if (eui64_hostton(nodestr, &eui) != 0 && eui64_aton(nodestr, &eui) != 0) 144 return (-1); 145 146 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 147 if (data == NULL) 148 err(EX_SOFTWARE, "%s: data malloc", __func__); 149 get_dev(fd,data); 150 151 for (i = 0; i < data->info_len; i++) { 152 fweui2eui64(&data->dev[i].eui, &tmpeui); 153 if (memcmp(&eui, &tmpeui, sizeof(struct eui64)) == 0) { 154 node = data->dev[i].dst; 155 if (data != NULL) 156 free(data); 157 goto gotnode; 158 } 159 } 160 if (i >= data->info_len) { 161 if (data != NULL) 162 free(data); 163 return (-1); 164 } 165 166 gotnode: 167 if (node < 0 || node > 63) 168 return (-1); 169 else 170 return (node); 171 } 172 173 static void 174 list_dev(int fd) 175 { 176 struct fw_devlstreq *data; 177 struct fw_devinfo *devinfo; 178 struct eui64 eui; 179 char addr[EUI64_SIZ], hostname[40]; 180 int i; 181 182 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 183 if (data == NULL) 184 err(EX_SOFTWARE, "%s:data malloc", __func__); 185 get_dev(fd, data); 186 printf("%d devices (info_len=%d)\n", data->n, data->info_len); 187 printf("node EUI64 status hostname\n"); 188 for (i = 0; i < data->info_len; i++) { 189 devinfo = &data->dev[i]; 190 fweui2eui64(&devinfo->eui, &eui); 191 eui64_ntoa(&eui, addr, sizeof(addr)); 192 if (eui64_ntohost(hostname, sizeof(hostname), &eui)) 193 hostname[0] = 0; 194 printf("%4d %s %6d %s\n", 195 (devinfo->status || i == 0) ? devinfo->dst : -1, 196 addr, 197 devinfo->status, 198 hostname 199 ); 200 } 201 free((void *)data); 202 } 203 204 static u_int32_t 205 read_write_quad(int fd, struct fw_eui64 eui, u_int32_t addr_lo, int readmode, u_int32_t data) 206 { 207 struct fw_asyreq *asyreq; 208 u_int32_t *qld, res; 209 210 asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16); 211 if (asyreq == NULL) 212 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 213 asyreq->req.len = 16; 214 #if 0 215 asyreq->req.type = FWASREQNODE; 216 asyreq->pkt.mode.rreqq.dst = FWLOCALBUS | node; 217 #else 218 asyreq->req.type = FWASREQEUI; 219 asyreq->req.dst.eui = eui; 220 #endif 221 asyreq->pkt.mode.rreqq.tlrt = 0; 222 if (readmode) 223 asyreq->pkt.mode.rreqq.tcode = FWTCODE_RREQQ; 224 else 225 asyreq->pkt.mode.rreqq.tcode = FWTCODE_WREQQ; 226 227 asyreq->pkt.mode.rreqq.dest_hi = 0xffff; 228 asyreq->pkt.mode.rreqq.dest_lo = addr_lo; 229 230 qld = (u_int32_t *)&asyreq->pkt; 231 if (!readmode) 232 asyreq->pkt.mode.wreqq.data = htonl(data); 233 234 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) { 235 err(EX_IOERR, "%s: ioctl", __func__); 236 } 237 res = qld[3]; 238 free(asyreq); 239 if (readmode) 240 return ntohl(res); 241 else 242 return 0; 243 } 244 245 /* 246 * Send a PHY Config Packet 247 * ieee 1394a-2005 4.3.4.3 248 * 249 * Message ID Root ID R T Gap Count 250 * 00(2 bits) (6 bits) 1 1 (6 bits) 251 * 252 * if "R" is set, then Root ID will be the next 253 * root node upon the next bus reset. 254 * if "T" is set, then Gap Count will be the 255 * value that all nodes use for their Gap Count 256 * if "R" and "T" are not set, then this message 257 * is either ignored or interpreted as an extended 258 * PHY config Packet as per 1394a-2005 4.3.4.4 259 */ 260 static void 261 send_phy_config(int fd, int root_node, int gap_count) 262 { 263 struct fw_asyreq *asyreq; 264 265 asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12); 266 if (asyreq == NULL) 267 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 268 asyreq->req.len = 12; 269 asyreq->req.type = FWASREQNODE; 270 asyreq->pkt.mode.ld[0] = 0; 271 asyreq->pkt.mode.ld[1] = 0; 272 asyreq->pkt.mode.common.tcode = FWTCODE_PHY; 273 if (root_node >= 0) 274 asyreq->pkt.mode.ld[1] |= ((root_node << 24) | (1 << 23)); 275 if (gap_count >= 0) 276 asyreq->pkt.mode.ld[1] |= ((1 << 22) | (gap_count << 16)); 277 asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1]; 278 279 printf("send phy_config root_node=%d gap_count=%d\n", 280 root_node, gap_count); 281 282 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 283 err(EX_IOERR, "%s: ioctl", __func__); 284 free(asyreq); 285 } 286 287 static void 288 link_on(int fd, int node) 289 { 290 struct fw_asyreq *asyreq; 291 292 asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 12); 293 if (asyreq == NULL) 294 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 295 asyreq->req.len = 12; 296 asyreq->req.type = FWASREQNODE; 297 asyreq->pkt.mode.common.tcode = FWTCODE_PHY; 298 asyreq->pkt.mode.ld[1] |= (1 << 30) | ((node & 0x3f) << 24); 299 asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1]; 300 301 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 302 err(EX_IOERR, "%s: ioctl", __func__); 303 free(asyreq); 304 } 305 306 static void 307 reset_start(int fd, int node) 308 { 309 struct fw_asyreq *asyreq; 310 311 asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 16); 312 if (asyreq == NULL) 313 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 314 asyreq->req.len = 16; 315 asyreq->req.type = FWASREQNODE; 316 asyreq->pkt.mode.wreqq.dst = FWLOCALBUS | (node & 0x3f); 317 asyreq->pkt.mode.wreqq.tlrt = 0; 318 asyreq->pkt.mode.wreqq.tcode = FWTCODE_WREQQ; 319 320 asyreq->pkt.mode.wreqq.dest_hi = 0xffff; 321 asyreq->pkt.mode.wreqq.dest_lo = 0xf0000000 | RESET_START; 322 323 asyreq->pkt.mode.wreqq.data = htonl(0x1); 324 325 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 326 err(EX_IOERR, "%s: ioctl", __func__); 327 free(asyreq); 328 } 329 330 static void 331 set_pri_req(int fd, u_int32_t pri_req) 332 { 333 struct fw_devlstreq *data; 334 struct fw_devinfo *devinfo; 335 struct eui64 eui; 336 char addr[EUI64_SIZ]; 337 u_int32_t max, reg, old; 338 int i; 339 340 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 341 if (data == NULL) 342 err(EX_SOFTWARE, "%s:data malloc", __func__); 343 get_dev(fd, data); 344 #define BUGET_REG 0xf0000218 345 for (i = 0; i < data->info_len; i++) { 346 devinfo = &data->dev[i]; 347 if (!devinfo->status) 348 continue; 349 reg = read_write_quad(fd, devinfo->eui, BUGET_REG, 1, 0); 350 fweui2eui64(&devinfo->eui, &eui); 351 eui64_ntoa(&eui, addr, sizeof(addr)); 352 printf("%d %s, %08x", 353 devinfo->dst, addr, reg); 354 if (reg > 0) { 355 old = (reg & 0x3f); 356 max = (reg & 0x3f00) >> 8; 357 if (pri_req > max) 358 pri_req = max; 359 printf(" 0x%x -> 0x%x\n", old, pri_req); 360 read_write_quad(fd, devinfo->eui, BUGET_REG, 0, pri_req); 361 } else { 362 printf("\n"); 363 } 364 } 365 free((void *)data); 366 } 367 368 static void 369 parse_bus_info_block(u_int32_t *p) 370 { 371 char addr[EUI64_SIZ]; 372 struct bus_info *bi; 373 struct eui64 eui; 374 375 bi = (struct bus_info *)p; 376 fweui2eui64(&bi->eui64, &eui); 377 eui64_ntoa(&eui, addr, sizeof(addr)); 378 printf("bus_name: 0x%04x\n" 379 "irmc:%d cmc:%d isc:%d bmc:%d pmc:%d\n" 380 "cyc_clk_acc:%d max_rec:%d max_rom:%d\n" 381 "generation:%d link_spd:%d\n" 382 "EUI64: %s\n", 383 bi->bus_name, 384 bi->irmc, bi->cmc, bi->isc, bi->bmc, bi->pmc, 385 bi->cyc_clk_acc, bi->max_rec, bi->max_rom, 386 bi->generation, bi->link_spd, 387 addr); 388 } 389 390 static int 391 get_crom(int fd, int node, void *crom_buf, int len) 392 { 393 struct fw_crom_buf buf; 394 int i, error; 395 struct fw_devlstreq *data; 396 397 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 398 if (data == NULL) 399 err(EX_SOFTWARE, "%s:data malloc", __func__); 400 get_dev(fd, data); 401 402 for (i = 0; i < data->info_len; i++) { 403 if (data->dev[i].dst == node && data->dev[i].eui.lo != 0) 404 break; 405 } 406 if (i == data->info_len) 407 errx(1, "no such node %d.", node); 408 else 409 buf.eui = data->dev[i].eui; 410 free((void *)data); 411 412 buf.len = len; 413 buf.ptr = crom_buf; 414 bzero(crom_buf, len); 415 if ((error = ioctl(fd, FW_GCROM, &buf)) < 0) { 416 err(EX_IOERR, "%s: ioctl", __func__); 417 } 418 419 return error; 420 } 421 422 static void 423 show_crom(u_int32_t *crom_buf) 424 { 425 int i; 426 struct crom_context cc; 427 char *desc, info[256]; 428 static const char *key_types = "ICLD"; 429 struct csrreg *reg; 430 struct csrdirectory *dir; 431 struct csrhdr *hdr; 432 u_int16_t crc; 433 434 printf("first quad: 0x%08x ", *crom_buf); 435 if (crom_buf[0] == 0) { 436 printf("(Invalid Configuration ROM)\n"); 437 return; 438 } 439 hdr = (struct csrhdr *)crom_buf; 440 if (hdr->info_len == 1) { 441 /* minimum ROM */ 442 reg = (struct csrreg *)hdr; 443 printf("verndor ID: 0x%06x\n", reg->val); 444 return; 445 } 446 printf("info_len=%d crc_len=%d crc=0x%04x", 447 hdr->info_len, hdr->crc_len, hdr->crc); 448 crc = crom_crc(crom_buf+1, hdr->crc_len); 449 if (crc == hdr->crc) 450 printf("(OK)\n"); 451 else 452 printf("(NG)\n"); 453 parse_bus_info_block(crom_buf+1); 454 455 crom_init_context(&cc, crom_buf); 456 dir = cc.stack[0].dir; 457 if (!dir) { 458 printf("no root directory - giving up\n"); 459 return; 460 } 461 printf("root_directory: len=0x%04x(%d) crc=0x%04x", 462 dir->crc_len, dir->crc_len, dir->crc); 463 crc = crom_crc((u_int32_t *)&dir->entry[0], dir->crc_len); 464 if (crc == dir->crc) 465 printf("(OK)\n"); 466 else 467 printf("(NG)\n"); 468 if (dir->crc_len < 1) 469 return; 470 while (cc.depth >= 0) { 471 desc = crom_desc(&cc, info, sizeof(info)); 472 reg = crom_get(&cc); 473 for (i = 0; i < cc.depth; i++) 474 printf("\t"); 475 printf("%02x(%c:%02x) %06x %s: %s\n", 476 reg->key, 477 key_types[(reg->key & CSRTYPE_MASK)>>6], 478 reg->key & CSRKEY_MASK, reg->val, 479 desc, info); 480 crom_next(&cc); 481 } 482 } 483 484 #define DUMP_FORMAT "%08x %08x %08x %08x %08x %08x %08x %08x\n" 485 486 static void 487 dump_crom(u_int32_t *p) 488 { 489 int len=1024, i; 490 491 for (i = 0; i < len/(4*8); i ++) { 492 printf(DUMP_FORMAT, 493 p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); 494 p += 8; 495 } 496 } 497 498 static void 499 load_crom(char *filename, u_int32_t *p) 500 { 501 FILE *file; 502 int len=1024, i; 503 504 if ((file = fopen(filename, "r")) == NULL) 505 err(1, "load_crom %s", filename); 506 for (i = 0; i < len/(4*8); i ++) { 507 fscanf(file, DUMP_FORMAT, 508 p, p+1, p+2, p+3, p+4, p+5, p+6, p+7); 509 p += 8; 510 } 511 } 512 513 static void 514 show_topology_map(int fd) 515 { 516 struct fw_topology_map *tmap; 517 union fw_self_id sid; 518 int i; 519 static const char *port_status[] = {" ", "-", "P", "C"}; 520 static const char *pwr_class[] = {" 0W", "15W", "30W", "45W", 521 "-1W", "-2W", "-5W", "-9W"}; 522 static const char *speed[] = {"S100", "S200", "S400", "S800"}; 523 tmap = malloc(sizeof(struct fw_topology_map)); 524 if (tmap == NULL) 525 err(EX_SOFTWARE, "%s:tmap malloc", __func__); 526 if (ioctl(fd, FW_GTPMAP, tmap) < 0) { 527 err(EX_IOERR, "%s: ioctl", __func__); 528 } 529 printf("crc_len: %d generation:%d node_count:%d sid_count:%d\n", 530 tmap->crc_len, tmap->generation, 531 tmap->node_count, tmap->self_id_count); 532 printf("id link gap_cnt speed delay cIRM power port0 port1 port2" 533 " ini more\n"); 534 for (i = 0; i < tmap->crc_len - 2; i++) { 535 sid = tmap->self_id[i]; 536 if (sid.p0.sequel) { 537 printf("%02d sequel packet\n", sid.p0.phy_id); 538 continue; 539 } 540 printf("%02d %2d %2d %4s %d %3s" 541 " %s %s %s %d %d\n", 542 sid.p0.phy_id, 543 sid.p0.link_active, 544 sid.p0.gap_count, 545 speed[sid.p0.phy_speed], 546 sid.p0.contender, 547 pwr_class[sid.p0.power_class], 548 port_status[sid.p0.port0], 549 port_status[sid.p0.port1], 550 port_status[sid.p0.port2], 551 sid.p0.initiated_reset, 552 sid.p0.more_packets 553 ); 554 } 555 free(tmap); 556 } 557 558 static void 559 read_phy_registers(int fd, u_int8_t *buf, int offset, int len) 560 { 561 struct fw_reg_req_t reg; 562 int i; 563 564 for (i = 0; i < len; i++) { 565 reg.addr = offset + i; 566 if (ioctl(fd, FWOHCI_RDPHYREG, ®) < 0) 567 err(EX_IOERR, "%s: ioctl", __func__); 568 buf[i] = (u_int8_t) reg.data; 569 printf("0x%02x ", reg.data); 570 } 571 printf("\n"); 572 } 573 574 static void 575 read_phy_page(int fd, u_int8_t *buf, int page, int port) 576 { 577 struct fw_reg_req_t reg; 578 579 reg.addr = 0x7; 580 reg.data = ((page & 7) << 5) | (port & 0xf); 581 if (ioctl(fd, FWOHCI_WRPHYREG, ®) < 0) 582 err(EX_IOERR, "%s: ioctl", __func__); 583 read_phy_registers(fd, buf, 8, 8); 584 } 585 586 static void 587 dump_phy_registers(int fd) 588 { 589 struct phyreg_base b; 590 struct phyreg_page0 p; 591 struct phyreg_page1 v; 592 int i; 593 594 printf("=== base register ===\n"); 595 read_phy_registers(fd, (u_int8_t *)&b, 0, 8); 596 printf( 597 "Physical_ID:%d R:%d CPS:%d\n" 598 "RHB:%d IBR:%d Gap_Count:%d\n" 599 "Extended:%d Num_Ports:%d\n" 600 "PHY_Speed:%d Delay:%d\n" 601 "LCtrl:%d C:%d Jitter:%d Pwr_Class:%d\n" 602 "WDIE:%d ISBR:%d CTOI:%d CPSI:%d STOI:%d PEI:%d EAA:%d EMC:%d\n" 603 "Max_Legacy_SPD:%d BLINK:%d Bridge:%d\n" 604 "Page_Select:%d Port_Select%d\n", 605 b.phy_id, b.r, b.cps, 606 b.rhb, b.ibr, b.gap_count, 607 b.extended, b.num_ports, 608 b.phy_speed, b.delay, 609 b.lctrl, b.c, b.jitter, b.pwr_class, 610 b.wdie, b.isbr, b.ctoi, b.cpsi, b.stoi, b.pei, b.eaa, b.emc, 611 b.legacy_spd, b.blink, b.bridge, 612 b.page_select, b.port_select 613 ); 614 615 for (i = 0; i < b.num_ports; i ++) { 616 printf("\n=== page 0 port %d ===\n", i); 617 read_phy_page(fd, (u_int8_t *)&p, 0, i); 618 printf( 619 "Astat:%d BStat:%d Ch:%d Con:%d RXOK:%d Dis:%d\n" 620 "Negotiated_speed:%d PIE:%d Fault:%d Stanby_fault:%d Disscrm:%d B_Only:%d\n" 621 "DC_connected:%d Max_port_speed:%d LPP:%d Cable_speed:%d\n" 622 "Connection_unreliable:%d Beta_mode:%d\n" 623 "Port_error:0x%x\n" 624 "Loop_disable:%d In_standby:%d Hard_disable:%d\n", 625 p.astat, p.bstat, p.ch, p.con, p.rxok, p.dis, 626 p.negotiated_speed, p.pie, p.fault, p.stanby_fault, p.disscrm, p.b_only, 627 p.dc_connected, p.max_port_speed, p.lpp, p.cable_speed, 628 p.connection_unreliable, p.beta_mode, 629 p.port_error, 630 p.loop_disable, p.in_standby, p.hard_disable 631 ); 632 } 633 printf("\n=== page 1 ===\n"); 634 read_phy_page(fd, (u_int8_t *)&v, 1, 0); 635 printf( 636 "Compliance:%d\n" 637 "Vendor_ID:0x%06x\n" 638 "Product_ID:0x%06x\n", 639 v.compliance, 640 (v.vendor_id[0] << 16) | (v.vendor_id[1] << 8) | v.vendor_id[2], 641 (v.product_id[0] << 16) | (v.product_id[1] << 8) | v.product_id[2] 642 ); 643 } 644 645 static int 646 open_dev(int *fd, char *devname) 647 { 648 if (*fd < 0) { 649 *fd = open(devname, O_RDWR); 650 if (*fd < 0) 651 return(-1); 652 653 } 654 return(0); 655 } 656 657 static void 658 sysctl_set_int(const char *name, int val) 659 { 660 if (sysctlbyname(name, NULL, NULL, &val, sizeof(int)) < 0) 661 err(1, "sysctl %s failed.", name); 662 } 663 664 static fwmethod * 665 detect_recv_fn(int fd, char ich) 666 { 667 char *buf; 668 struct fw_isochreq isoreq; 669 struct fw_isobufreq bufreq; 670 int len; 671 u_int32_t *ptr; 672 struct ciphdr *ciph; 673 fwmethod *retfn; 674 #define RECV_NUM_PACKET 16 675 #define RECV_PACKET_SZ 1024 676 677 bufreq.rx.nchunk = 8; 678 bufreq.rx.npacket = RECV_NUM_PACKET; 679 bufreq.rx.psize = RECV_PACKET_SZ; 680 bufreq.tx.nchunk = 0; 681 bufreq.tx.npacket = 0; 682 bufreq.tx.psize = 0; 683 684 if (ioctl(fd, FW_SSTBUF, &bufreq) < 0) 685 err(EX_IOERR, "%s: ioctl FW_SSTBUF", __func__); 686 687 isoreq.ch = ich & 0x3f; 688 isoreq.tag = (ich >> 6) & 3; 689 690 if (ioctl(fd, FW_SRSTREAM, &isoreq) < 0) 691 err(EX_IOERR, "%s: ioctl FW_SRSTREAM", __func__); 692 693 buf = (char *)malloc(RECV_NUM_PACKET * RECV_PACKET_SZ); 694 if (buf == NULL) 695 err(EX_SOFTWARE, "%s:buf malloc", __func__); 696 /* 697 * fwdev.c seems to return EIO on error and 698 * the return value of the last uiomove 699 * on success. For now, checking that the 700 * return is not less than zero should be 701 * sufficient. fwdev.c::fw_read() should 702 * return the total length read, not the value 703 * of the last uiomove(). 704 */ 705 len = read(fd, buf, RECV_NUM_PACKET * RECV_PACKET_SZ); 706 if (len < 0) 707 err(EX_IOERR, "%s: error reading from device", __func__); 708 ptr = (u_int32_t *) buf; 709 ciph = (struct ciphdr *)(ptr + 1); 710 711 switch(ciph->fmt) { 712 case CIP_FMT_DVCR: 713 fprintf(stderr, "Detected DV format on input.\n"); 714 retfn = dvrecv; 715 break; 716 case CIP_FMT_MPEG: 717 fprintf(stderr, "Detected MPEG TS format on input.\n"); 718 retfn = mpegtsrecv; 719 break; 720 default: 721 errx(1, "Unsupported format for receiving: fmt=0x%x", ciph->fmt); 722 } 723 free(buf); 724 return retfn; 725 } 726 727 int 728 main(int argc, char **argv) 729 { 730 #define MAX_BOARDS 10 731 u_int32_t crom_buf[1024/4]; 732 u_int32_t crom_buf_hex[1024/4]; 733 char devbase[64]; 734 const char *device_string = "/dev/fw"; 735 int fd = -1, ch, len=1024; 736 int32_t current_board = 0; 737 /* 738 * If !command_set, then -u will display the nodes for the board. 739 * This emulates the previous behavior when -u is passed by itself 740 */ 741 bool command_set = false; 742 bool open_needed = false; 743 long tmp; 744 struct fw_eui64 eui; 745 struct eui64 target; 746 fwmethod *recvfn = NULL; 747 /* 748 * Holders for which functions 749 * to iterate through 750 */ 751 bool display_board_only = false; 752 bool display_crom = false; 753 bool send_bus_reset = false; 754 bool display_crom_hex = false; 755 bool load_crom_from_file = false; 756 bool set_fwmem_target = false; 757 bool dump_topology = false; 758 bool dump_phy_reg = false; 759 760 int32_t priority_budget = -1; 761 int32_t set_root_node = -1; 762 int32_t set_gap_count = -1; 763 int32_t send_link_on = -1; 764 int32_t send_reset_start = -1; 765 766 char *crom_string = NULL; 767 char *crom_string_hex = NULL; 768 char *recv_data = NULL; 769 char *send_data = NULL; 770 771 if (argc < 2) { 772 for (current_board = 0; current_board < MAX_BOARDS; current_board++) { 773 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 774 if (open_dev(&fd, devbase) < 0) { 775 if (current_board == 0) { 776 usage(); 777 err(EX_IOERR, "%s: Error opening firewire controller #%d %s", 778 __func__, current_board, devbase); 779 } 780 return(EIO); 781 } 782 list_dev(fd); 783 close(fd); 784 fd = -1; 785 } 786 } 787 /* 788 * Parse all command line options, then execute requested operations. 789 */ 790 while ((ch = getopt(argc, argv, "M:f:g:m:o:s:b:prtc:d:l:u:R:S:")) != -1) { 791 switch(ch) { 792 case 'b': 793 priority_budget = strtol(optarg, NULL, 0); 794 if (priority_budget < 0 || priority_budget > INT32_MAX) 795 errx(EX_USAGE, "%s: priority_budget out of range: %s", __func__, optarg); 796 command_set = true; 797 open_needed = true; 798 display_board_only = false; 799 break; 800 case 'c': 801 crom_string = malloc(strlen(optarg)+1); 802 if (crom_string == NULL) 803 err(EX_SOFTWARE, "%s:crom_string malloc", __func__); 804 if ( (strtol(crom_string, NULL, 0) < 0) || strtol(crom_string, NULL, 0) > MAX_BOARDS) 805 errx(EX_USAGE, "%s:Invalid value for node", __func__); 806 strcpy(crom_string, optarg); 807 display_crom = 1; 808 open_needed = true; 809 command_set = true; 810 display_board_only = false; 811 break; 812 case 'd': 813 crom_string_hex = malloc(strlen(optarg)+1); 814 if (crom_string_hex == NULL) 815 err(EX_SOFTWARE, "%s:crom_string_hex malloc", __func__); 816 strcpy(crom_string_hex, optarg); 817 display_crom_hex = 1; 818 open_needed = true; 819 command_set = true; 820 display_board_only = false; 821 break; 822 case 'f': 823 #define MAX_PHY_CONFIG 0x3f 824 set_root_node = strtol(optarg, NULL, 0); 825 if ( (set_root_node < 0) || (set_root_node > MAX_PHY_CONFIG) ) 826 errx(EX_USAGE, "%s:set_root_node out of range", __func__); 827 open_needed = true; 828 command_set = true; 829 display_board_only = false; 830 break; 831 case 'g': 832 set_gap_count = strtol(optarg, NULL, 0); 833 if ( (set_gap_count < 0) || (set_gap_count > MAX_PHY_CONFIG) ) 834 errx(EX_USAGE, "%s:set_gap_count out of range", __func__); 835 open_needed = true; 836 command_set = true; 837 display_board_only = false; 838 break; 839 case 'l': 840 load_crom_from_file = 1; 841 load_crom(optarg, crom_buf); 842 command_set = true; 843 display_board_only = false; 844 break; 845 case 'm': 846 set_fwmem_target = 1; 847 open_needed = 0; 848 command_set = true; 849 display_board_only = false; 850 if (eui64_hostton(optarg, &target) != 0 && 851 eui64_aton(optarg, &target) != 0) 852 errx(EX_USAGE, "%s: invalid target: %s", __func__, optarg); 853 break; 854 case 'o': 855 send_link_on = str2node(fd, optarg); 856 if ( (send_link_on < 0) || (send_link_on > MAX_PHY_CONFIG) ) 857 errx(EX_USAGE, "%s: node out of range: %s\n",__func__, optarg); 858 open_needed = true; 859 command_set = true; 860 display_board_only = false; 861 break; 862 case 'p': 863 dump_phy_reg = 1; 864 open_needed = true; 865 command_set = true; 866 display_board_only = false; 867 break; 868 case 'r': 869 send_bus_reset = 1; 870 open_needed = true; 871 command_set = true; 872 display_board_only = false; 873 break; 874 case 's': 875 send_reset_start = str2node(fd, optarg); 876 if ( (send_reset_start < 0) || (send_reset_start > MAX_PHY_CONFIG) ) 877 errx(EX_USAGE, "%s: node out of range: %s\n", __func__, optarg); 878 open_needed = true; 879 command_set = true; 880 display_board_only = false; 881 break; 882 case 't': 883 dump_topology = 1; 884 open_needed = true; 885 command_set = true; 886 display_board_only = false; 887 break; 888 case 'u': 889 if(!command_set) 890 display_board_only = true; 891 current_board = strtol(optarg, NULL, 0); 892 open_needed = true; 893 break; 894 case 'M': 895 switch (optarg[0]) { 896 case 'm': 897 recvfn = mpegtsrecv; 898 break; 899 case 'd': 900 recvfn = dvrecv; 901 break; 902 default: 903 errx(EX_USAGE, "unrecognized method: %s", 904 optarg); 905 } 906 command_set = true; 907 display_board_only = false; 908 break; 909 case 'R': 910 recv_data = malloc(strlen(optarg)+1); 911 if (recv_data == NULL) 912 err(EX_SOFTWARE, "%s:recv_data malloc", __func__); 913 strcpy(recv_data, optarg); 914 open_needed = false; 915 command_set = true; 916 display_board_only = false; 917 break; 918 case 'S': 919 send_data = malloc(strlen(optarg)+1); 920 if (send_data == NULL) 921 err(EX_SOFTWARE, "%s:send_data malloc", __func__); 922 strcpy(send_data, optarg); 923 open_needed = true; 924 command_set = true; 925 display_board_only = false; 926 break; 927 case '?': 928 default: 929 usage(); 930 warnc(EINVAL, "%s: Unknown command line arguments", __func__); 931 return 0; 932 } 933 } /* end while */ 934 935 /* 936 * Catch the error case when the user 937 * executes the command with non ''-'' 938 * delimited arguments. 939 * Generate the usage() display and exit. 940 */ 941 if (!command_set && !display_board_only) { 942 usage(); 943 warnc(EINVAL, "%s: Unknown command line arguments", __func__); 944 return 0; 945 } 946 947 /* 948 * If -u <bus_number> is passed, execute 949 * command for that card only. 950 * 951 * If -u <bus_number> is not passed, execute 952 * command for card 0 only. 953 * 954 */ 955 if(open_needed){ 956 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 957 if (open_dev(&fd, devbase) < 0) { 958 err(EX_IOERR, "%s: Error opening firewire controller #%d %s", __func__, current_board, devbase); 959 } 960 } 961 /* 962 * display the nodes on this board "-u" 963 * only 964 */ 965 if (display_board_only) 966 list_dev(fd); 967 968 /* 969 * dump_phy_reg "-p" 970 */ 971 if (dump_phy_reg) 972 dump_phy_registers(fd); 973 974 /* 975 * send a BUS_RESET Event "-r" 976 */ 977 if (send_bus_reset) { 978 if(ioctl(fd, FW_IBUSRST, &tmp) < 0) 979 err(EX_IOERR, "%s: Ioctl of bus reset failed for %s", __func__, devbase); 980 } 981 /* 982 * Print out the CROM for this node "-c" 983 */ 984 if (display_crom) { 985 tmp = str2node(fd, crom_string); 986 get_crom(fd, tmp, crom_buf, len); 987 show_crom(crom_buf); 988 free(crom_string); 989 } 990 /* 991 * Hex Dump the CROM for this node "-d" 992 */ 993 if (display_crom_hex) { 994 tmp = str2node(fd, crom_string_hex); 995 get_crom(fd, tmp, crom_buf_hex, len); 996 dump_crom(crom_buf_hex); 997 free(crom_string_hex); 998 } 999 /* 1000 * Set Priority Budget to value for this node "-b" 1001 */ 1002 if (priority_budget >= 0) 1003 set_pri_req(fd, priority_budget); 1004 1005 /* 1006 * Explicitly set the root node of this bus to value "-f" 1007 */ 1008 if (set_root_node >= 0) 1009 send_phy_config(fd, set_root_node, -1); 1010 1011 /* 1012 * Set the gap count for this card/bus "-g" 1013 */ 1014 if (set_gap_count >= 0) 1015 send_phy_config(fd, -1, set_gap_count); 1016 1017 /* 1018 * Load a CROM from a file "-l" 1019 */ 1020 if (load_crom_from_file) 1021 show_crom(crom_buf); 1022 /* 1023 * Set the fwmem target for a node to argument "-m" 1024 */ 1025 if (set_fwmem_target) { 1026 eui.hi = ntohl(*(u_int32_t*)&(target.octet[0])); 1027 eui.lo = ntohl(*(u_int32_t*)&(target.octet[4])); 1028 #if defined(__FreeBSD__) 1029 sysctl_set_int("hw.firewire.fwmem.eui64_hi", eui.hi); 1030 sysctl_set_int("hw.firewire.fwmem.eui64_lo", eui.lo); 1031 #elif defined(__NetBSD__) 1032 sysctl_set_int("hw.fwmem.eui64_hi", eui.hi); 1033 sysctl_set_int("hw.fwmem.eui64_lo", eui.lo); 1034 #else 1035 #warning "You need to add support for your OS" 1036 #endif 1037 1038 } 1039 1040 /* 1041 * Send a link on to this board/bus "-o" 1042 */ 1043 if (send_link_on >= 0) 1044 link_on(fd, send_link_on); 1045 1046 /* 1047 * Send a reset start to this board/bus "-s" 1048 */ 1049 if (send_reset_start >= 0) 1050 reset_start(fd, send_reset_start); 1051 1052 /* 1053 * Dump the node topology for this board/bus "-t" 1054 */ 1055 if (dump_topology) 1056 show_topology_map(fd); 1057 1058 /* 1059 * Recieve data file from node "-R" 1060 */ 1061 #define TAG (1<<6) 1062 #define CHANNEL 63 1063 if (recv_data != NULL){ 1064 if (recvfn == NULL) { /* guess... */ 1065 recvfn = detect_recv_fn(fd, TAG | CHANNEL); 1066 close(fd); 1067 fd = -1; 1068 } 1069 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 1070 if (open_dev(&fd, devbase) < 0) 1071 err(EX_IOERR, "%s: Error opening firewire controller #%d %s in recv_data\n", __func__, current_board, devbase); 1072 (*recvfn)(fd, recv_data, TAG | CHANNEL, -1); 1073 free(recv_data); 1074 } 1075 1076 /* 1077 * Send data file to node "-S" 1078 */ 1079 if (send_data != NULL){ 1080 dvsend(fd, send_data, TAG | CHANNEL, -1); 1081 free(send_data); 1082 } 1083 1084 if (fd > 0) { 1085 close(fd); 1086 fd = -1; 1087 } 1088 return 0; 1089 } 1090