1 /*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (C) 2002 5 * Hidetoshi Shimokawa. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * 18 * This product includes software developed by Hidetoshi Shimokawa. 19 * 20 * 4. Neither the name of the author nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 */ 36 37 #if defined(__FreeBSD__) 38 #include <sys/cdefs.h> 39 #endif 40 41 #include <sys/param.h> 42 #include <sys/malloc.h> 43 #include <sys/types.h> 44 #include <sys/sysctl.h> 45 #include <sys/socket.h> 46 #include <sys/ioctl.h> 47 #include <sys/errno.h> 48 #if defined(__FreeBSD__) 49 #include <sys/eui64.h> 50 #include <dev/firewire/firewire.h> 51 #include <dev/firewire/iec13213.h> 52 #include <dev/firewire/fwphyreg.h> 53 #include <dev/firewire/iec68113.h> 54 #elif defined(__NetBSD__) 55 #include "eui64.h" 56 #include <dev/ieee1394/firewire.h> 57 #include <dev/ieee1394/iec13213.h> 58 #include <dev/ieee1394/fwphyreg.h> 59 #include <dev/ieee1394/iec68113.h> 60 #else 61 #warning "You need to add support for your OS" 62 #endif 63 64 65 #include <netinet/in.h> 66 #include <fcntl.h> 67 #include <stdio.h> 68 #include <err.h> 69 #include <stdlib.h> 70 #include <string.h> 71 #include <sysexits.h> 72 #include <unistd.h> 73 #include <stdint.h> 74 #include <stdbool.h> 75 #include "fwmethods.h" 76 77 static void sysctl_set_int(const char *, int); 78 79 static void 80 usage(void) 81 { 82 fprintf(stderr, 83 "%s [-u bus_num] [-prt] [-c node] [-d node] [-o node] [-s node]\n" 84 "\t [-l file] [-g gap_count] [-f force_root ] [-b pri_req]\n" 85 "\t [-M mode] [-R filename] [-S filename] [-m EUI64 | hostname]\n" 86 "\t-u: specify bus number\n" 87 "\t-p: Display current PHY register settings\n" 88 "\t-r: bus reset\n" 89 "\t-t: read topology map\n" 90 "\t-c: read configuration ROM\n" 91 "\t-d: hex dump of configuration ROM\n" 92 "\t-o: send link-on packet to the node\n" 93 "\t-s: write RESET_START register on the node\n" 94 "\t-l: load and parse hex dump file of configuration ROM\n" 95 "\t-g: set gap count\n" 96 "\t-f: force root node\n" 97 "\t-b: set PRIORITY_BUDGET register on all supported nodes\n" 98 "\t-M: specify dv or mpeg\n" 99 "\t-R: Receive DV or MPEG TS stream\n" 100 "\t-S: Send DV stream\n" 101 "\t-m: set fwmem target\n" 102 , getprogname() ); 103 fprintf(stderr, "\n"); 104 } 105 106 static void 107 fweui2eui64(const struct fw_eui64 *fweui, struct eui64 *eui) 108 { 109 *(u_int32_t*)&(eui->octet[0]) = htonl(fweui->hi); 110 *(u_int32_t*)&(eui->octet[4]) = htonl(fweui->lo); 111 } 112 113 static void 114 get_dev(int fd, struct fw_devlstreq *data) 115 { 116 if (data == NULL) 117 err(EX_SOFTWARE, "%s: data malloc", __func__); 118 if( ioctl(fd, FW_GDEVLST, data) < 0) { 119 err(EX_IOERR, "%s: ioctl", __func__); 120 } 121 } 122 123 static int 124 str2node(int fd, const char *nodestr) 125 { 126 struct eui64 eui, tmpeui; 127 struct fw_devlstreq *data; 128 char *endptr; 129 int i, node; 130 131 if (nodestr == NULL || *nodestr == '\0') 132 return (-1); 133 134 /* 135 * Deal with classic node specifications. 136 */ 137 node = strtol(nodestr, &endptr, 0); 138 if (*endptr == '\0') 139 goto gotnode; 140 141 /* 142 * Try to get an eui and match it against available nodes. 143 */ 144 if (eui64_hostton(nodestr, &eui) != 0 && eui64_aton(nodestr, &eui) != 0) 145 return (-1); 146 147 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 148 if (data == NULL) 149 err(EX_SOFTWARE, "%s: data malloc", __func__); 150 get_dev(fd,data); 151 152 for (i = 0; i < data->info_len; i++) { 153 fweui2eui64(&data->dev[i].eui, &tmpeui); 154 if (memcmp(&eui, &tmpeui, sizeof(struct eui64)) == 0) { 155 node = data->dev[i].dst; 156 free(data); 157 goto gotnode; 158 } 159 } 160 if (i >= data->info_len) { 161 if (data != NULL) 162 free(data); 163 return (-1); 164 } 165 166 gotnode: 167 if (node < 0 || node > 63) 168 return (-1); 169 else 170 return (node); 171 } 172 173 static void 174 list_dev(int fd) 175 { 176 struct fw_devlstreq *data; 177 struct fw_devinfo *devinfo; 178 struct eui64 eui; 179 char addr[EUI64_SIZ], hostname[40]; 180 int i; 181 182 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 183 if (data == NULL) 184 err(EX_SOFTWARE, "%s:data malloc", __func__); 185 get_dev(fd, data); 186 printf("%d devices (info_len=%d)\n", data->n, data->info_len); 187 printf("node EUI64 status hostname\n"); 188 for (i = 0; i < data->info_len; i++) { 189 devinfo = &data->dev[i]; 190 fweui2eui64(&devinfo->eui, &eui); 191 eui64_ntoa(&eui, addr, sizeof(addr)); 192 if (eui64_ntohost(hostname, sizeof(hostname), &eui)) 193 hostname[0] = 0; 194 printf("%4d %s %6d %s\n", 195 (devinfo->status || i == 0) ? devinfo->dst : -1, 196 addr, 197 devinfo->status, 198 hostname 199 ); 200 } 201 free((void *)data); 202 } 203 204 static u_int32_t 205 read_write_quad(int fd, struct fw_eui64 eui, u_int32_t addr_lo, int readmode, u_int32_t data) 206 { 207 struct fw_asyreq *asyreq; 208 u_int32_t *qld, res; 209 210 asyreq = malloc(sizeof(*asyreq)); 211 if (asyreq == NULL) 212 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 213 asyreq->req.len = 16; 214 #if 0 215 asyreq->req.type = FWASREQNODE; 216 asyreq->pkt.mode.rreqq.dst = FWLOCALBUS | node; 217 #else 218 asyreq->req.type = FWASREQEUI; 219 asyreq->req.dst.eui = eui; 220 #endif 221 asyreq->pkt.mode.rreqq.tlrt = 0; 222 if (readmode) 223 asyreq->pkt.mode.rreqq.tcode = FWTCODE_RREQQ; 224 else 225 asyreq->pkt.mode.rreqq.tcode = FWTCODE_WREQQ; 226 227 asyreq->pkt.mode.rreqq.dest_hi = 0xffff; 228 asyreq->pkt.mode.rreqq.dest_lo = addr_lo; 229 230 qld = (u_int32_t *)&asyreq->pkt; 231 if (!readmode) 232 asyreq->pkt.mode.wreqq.data = htonl(data); 233 234 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) { 235 err(EX_IOERR, "%s: ioctl", __func__); 236 } 237 res = qld[3]; 238 free(asyreq); 239 if (readmode) 240 return ntohl(res); 241 else 242 return 0; 243 } 244 245 /* 246 * Send a PHY Config Packet 247 * ieee 1394a-2005 4.3.4.3 248 * 249 * Message ID Root ID R T Gap Count 250 * 00(2 bits) (6 bits) 1 1 (6 bits) 251 * 252 * if "R" is set, then Root ID will be the next 253 * root node upon the next bus reset. 254 * if "T" is set, then Gap Count will be the 255 * value that all nodes use for their Gap Count 256 * if "R" and "T" are not set, then this message 257 * is either ignored or interpreted as an extended 258 * PHY config Packet as per 1394a-2005 4.3.4.4 259 */ 260 static void 261 send_phy_config(int fd, int root_node, int gap_count) 262 { 263 struct fw_asyreq *asyreq; 264 265 asyreq = malloc(sizeof(*asyreq)); 266 if (asyreq == NULL) 267 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 268 asyreq->req.len = 12; 269 asyreq->req.type = FWASREQNODE; 270 asyreq->pkt.mode.ld[0] = 0; 271 asyreq->pkt.mode.ld[1] = 0; 272 asyreq->pkt.mode.common.tcode = FWTCODE_PHY; 273 if (root_node >= 0) 274 asyreq->pkt.mode.ld[1] |= ((root_node << 24) | (1 << 23)); 275 if (gap_count >= 0) 276 asyreq->pkt.mode.ld[1] |= ((1 << 22) | (gap_count << 16)); 277 asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1]; 278 279 printf("send phy_config root_node=%d gap_count=%d\n", 280 root_node, gap_count); 281 282 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 283 err(EX_IOERR, "%s: ioctl", __func__); 284 free(asyreq); 285 } 286 287 static void 288 link_on(int fd, int node) 289 { 290 struct fw_asyreq *asyreq; 291 292 asyreq = malloc(sizeof(*asyreq)); 293 if (asyreq == NULL) 294 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 295 asyreq->req.len = 12; 296 asyreq->req.type = FWASREQNODE; 297 asyreq->pkt.mode.common.tcode = FWTCODE_PHY; 298 asyreq->pkt.mode.ld[1] |= (1 << 30) | ((node & 0x3f) << 24); 299 asyreq->pkt.mode.ld[2] = ~asyreq->pkt.mode.ld[1]; 300 301 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 302 err(EX_IOERR, "%s: ioctl", __func__); 303 free(asyreq); 304 } 305 306 static void 307 reset_start(int fd, int node) 308 { 309 struct fw_asyreq *asyreq; 310 311 asyreq = malloc(sizeof(*asyreq)); 312 if (asyreq == NULL) 313 err(EX_SOFTWARE, "%s:asyreq malloc", __func__); 314 asyreq->req.len = 16; 315 asyreq->req.type = FWASREQNODE; 316 asyreq->pkt.mode.wreqq.dst = FWLOCALBUS | (node & 0x3f); 317 asyreq->pkt.mode.wreqq.tlrt = 0; 318 asyreq->pkt.mode.wreqq.tcode = FWTCODE_WREQQ; 319 320 asyreq->pkt.mode.wreqq.dest_hi = 0xffff; 321 asyreq->pkt.mode.wreqq.dest_lo = 0xf0000000 | RESET_START; 322 323 asyreq->pkt.mode.wreqq.data = htonl(0x1); 324 325 if (ioctl(fd, FW_ASYREQ, asyreq) < 0) 326 err(EX_IOERR, "%s: ioctl", __func__); 327 free(asyreq); 328 } 329 330 static void 331 set_pri_req(int fd, u_int32_t pri_req) 332 { 333 struct fw_devlstreq *data; 334 struct fw_devinfo *devinfo; 335 struct eui64 eui; 336 char addr[EUI64_SIZ]; 337 u_int32_t max, reg, old; 338 int i; 339 340 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 341 if (data == NULL) 342 err(EX_SOFTWARE, "%s:data malloc", __func__); 343 get_dev(fd, data); 344 #define BUGET_REG 0xf0000218 345 for (i = 0; i < data->info_len; i++) { 346 devinfo = &data->dev[i]; 347 if (!devinfo->status) 348 continue; 349 reg = read_write_quad(fd, devinfo->eui, BUGET_REG, 1, 0); 350 fweui2eui64(&devinfo->eui, &eui); 351 eui64_ntoa(&eui, addr, sizeof(addr)); 352 printf("%d %s, %08x", 353 devinfo->dst, addr, reg); 354 if (reg > 0) { 355 old = (reg & 0x3f); 356 max = (reg & 0x3f00) >> 8; 357 if (pri_req > max) 358 pri_req = max; 359 printf(" 0x%x -> 0x%x\n", old, pri_req); 360 read_write_quad(fd, devinfo->eui, BUGET_REG, 0, pri_req); 361 } else { 362 printf("\n"); 363 } 364 } 365 free((void *)data); 366 } 367 368 static void 369 parse_bus_info_block(u_int32_t *p) 370 { 371 char addr[EUI64_SIZ]; 372 struct bus_info *bi; 373 struct eui64 eui; 374 375 bi = (struct bus_info *)p; 376 fweui2eui64(&bi->eui64, &eui); 377 eui64_ntoa(&eui, addr, sizeof(addr)); 378 printf("bus_name: 0x%04x\n" 379 "irmc:%d cmc:%d isc:%d bmc:%d pmc:%d\n" 380 "cyc_clk_acc:%d max_rec:%d max_rom:%d\n" 381 "generation:%d link_spd:%d\n" 382 "EUI64: %s\n", 383 bi->bus_name, 384 bi->irmc, bi->cmc, bi->isc, bi->bmc, bi->pmc, 385 bi->cyc_clk_acc, bi->max_rec, bi->max_rom, 386 bi->generation, bi->link_spd, 387 addr); 388 } 389 390 static int 391 get_crom(int fd, int node, void *crom_buf, int len) 392 { 393 struct fw_crom_buf buf; 394 int i, error; 395 struct fw_devlstreq *data; 396 397 data = (struct fw_devlstreq *)malloc(sizeof(struct fw_devlstreq)); 398 if (data == NULL) 399 err(EX_SOFTWARE, "%s:data malloc", __func__); 400 get_dev(fd, data); 401 402 for (i = 0; i < data->info_len; i++) { 403 if (data->dev[i].dst == node && data->dev[i].eui.lo != 0) 404 break; 405 } 406 if (i == data->info_len) 407 errx(1, "no such node %d.", node); 408 else 409 buf.eui = data->dev[i].eui; 410 free((void *)data); 411 412 buf.len = len; 413 buf.ptr = crom_buf; 414 bzero(crom_buf, len); 415 if ((error = ioctl(fd, FW_GCROM, &buf)) < 0) { 416 err(EX_IOERR, "%s: ioctl", __func__); 417 } 418 419 return error; 420 } 421 422 static void 423 show_crom(u_int32_t *crom_buf) 424 { 425 int i; 426 struct crom_context cc; 427 char *desc, info[256]; 428 static const char *key_types = "ICLD"; 429 struct csrreg *reg; 430 struct csrdirectory *dir; 431 struct csrhdr *hdr; 432 u_int16_t crc; 433 434 printf("first quad: 0x%08x ", *crom_buf); 435 if (crom_buf[0] == 0) { 436 printf("(Invalid Configuration ROM)\n"); 437 return; 438 } 439 hdr = (struct csrhdr *)crom_buf; 440 if (hdr->info_len == 1) { 441 /* minimum ROM */ 442 reg = (struct csrreg *)hdr; 443 printf("verndor ID: 0x%06x\n", reg->val); 444 return; 445 } 446 printf("info_len=%d crc_len=%d crc=0x%04x", 447 hdr->info_len, hdr->crc_len, hdr->crc); 448 crc = crom_crc(crom_buf+1, hdr->crc_len); 449 if (crc == hdr->crc) 450 printf("(OK)\n"); 451 else 452 printf("(NG)\n"); 453 parse_bus_info_block(crom_buf+1); 454 455 crom_init_context(&cc, crom_buf); 456 dir = cc.stack[0].dir; 457 if (!dir) { 458 printf("no root directory - giving up\n"); 459 return; 460 } 461 printf("root_directory: len=0x%04x(%d) crc=0x%04x", 462 dir->crc_len, dir->crc_len, dir->crc); 463 crc = crom_crc((u_int32_t *)&dir->entry[0], dir->crc_len); 464 if (crc == dir->crc) 465 printf("(OK)\n"); 466 else 467 printf("(NG)\n"); 468 if (dir->crc_len < 1) 469 return; 470 while (cc.depth >= 0) { 471 desc = crom_desc(&cc, info, sizeof(info)); 472 reg = crom_get(&cc); 473 for (i = 0; i < cc.depth; i++) 474 printf("\t"); 475 printf("%02x(%c:%02x) %06x %s: %s\n", 476 reg->key, 477 key_types[(reg->key & CSRTYPE_MASK)>>6], 478 reg->key & CSRKEY_MASK, reg->val, 479 desc, info); 480 crom_next(&cc); 481 } 482 } 483 484 #define DUMP_FORMAT "%08x %08x %08x %08x %08x %08x %08x %08x\n" 485 486 static void 487 dump_crom(u_int32_t *p) 488 { 489 int len=1024, i; 490 491 for (i = 0; i < len/(4*8); i ++) { 492 printf(DUMP_FORMAT, 493 p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); 494 p += 8; 495 } 496 } 497 498 static void 499 load_crom(char *filename, u_int32_t *p) 500 { 501 FILE *file; 502 int len=1024, i; 503 504 if ((file = fopen(filename, "r")) == NULL) 505 err(1, "load_crom %s", filename); 506 for (i = 0; i < len/(4*8); i ++) { 507 fscanf(file, DUMP_FORMAT, 508 p, p+1, p+2, p+3, p+4, p+5, p+6, p+7); 509 p += 8; 510 } 511 fclose(file); 512 } 513 514 static void 515 show_topology_map(int fd) 516 { 517 struct fw_topology_map *tmap; 518 union fw_self_id sid; 519 int i; 520 static const char *port_status[] = {" ", "-", "P", "C"}; 521 static const char *pwr_class[] = {" 0W", "15W", "30W", "45W", 522 "-1W", "-2W", "-5W", "-9W"}; 523 static const char *speed[] = {"S100", "S200", "S400", "S800"}; 524 tmap = malloc(sizeof(struct fw_topology_map)); 525 if (tmap == NULL) 526 err(EX_SOFTWARE, "%s:tmap malloc", __func__); 527 if (ioctl(fd, FW_GTPMAP, tmap) < 0) { 528 err(EX_IOERR, "%s: ioctl", __func__); 529 } 530 printf("crc_len: %d generation:%d node_count:%d sid_count:%d\n", 531 tmap->crc_len, tmap->generation, 532 tmap->node_count, tmap->self_id_count); 533 printf("id link gap_cnt speed delay cIRM power port0 port1 port2" 534 " ini more\n"); 535 for (i = 0; i < tmap->crc_len - 2; i++) { 536 sid = tmap->self_id[i]; 537 if (sid.p0.sequel) { 538 printf("%02d sequel packet\n", sid.p0.phy_id); 539 continue; 540 } 541 printf("%02d %2d %2d %4s %d %3s" 542 " %s %s %s %d %d\n", 543 sid.p0.phy_id, 544 sid.p0.link_active, 545 sid.p0.gap_count, 546 speed[sid.p0.phy_speed], 547 sid.p0.contender, 548 pwr_class[sid.p0.power_class], 549 port_status[sid.p0.port0], 550 port_status[sid.p0.port1], 551 port_status[sid.p0.port2], 552 sid.p0.initiated_reset, 553 sid.p0.more_packets 554 ); 555 } 556 free(tmap); 557 } 558 559 static void 560 read_phy_registers(int fd, u_int8_t *buf, int offset, int len) 561 { 562 struct fw_reg_req_t reg; 563 int i; 564 565 for (i = 0; i < len; i++) { 566 reg.addr = offset + i; 567 if (ioctl(fd, FWOHCI_RDPHYREG, ®) < 0) 568 err(EX_IOERR, "%s: ioctl", __func__); 569 buf[i] = (u_int8_t) reg.data; 570 printf("0x%02x ", reg.data); 571 } 572 printf("\n"); 573 } 574 575 static void 576 read_phy_page(int fd, u_int8_t *buf, int page, int port) 577 { 578 struct fw_reg_req_t reg; 579 580 reg.addr = 0x7; 581 reg.data = ((page & 7) << 5) | (port & 0xf); 582 if (ioctl(fd, FWOHCI_WRPHYREG, ®) < 0) 583 err(EX_IOERR, "%s: ioctl", __func__); 584 read_phy_registers(fd, buf, 8, 8); 585 } 586 587 static void 588 dump_phy_registers(int fd) 589 { 590 struct phyreg_base b; 591 struct phyreg_page0 p; 592 struct phyreg_page1 v; 593 int i; 594 595 printf("=== base register ===\n"); 596 read_phy_registers(fd, (u_int8_t *)&b, 0, 8); 597 printf( 598 "Physical_ID:%d R:%d CPS:%d\n" 599 "RHB:%d IBR:%d Gap_Count:%d\n" 600 "Extended:%d Num_Ports:%d\n" 601 "PHY_Speed:%d Delay:%d\n" 602 "LCtrl:%d C:%d Jitter:%d Pwr_Class:%d\n" 603 "WDIE:%d ISBR:%d CTOI:%d CPSI:%d STOI:%d PEI:%d EAA:%d EMC:%d\n" 604 "Max_Legacy_SPD:%d BLINK:%d Bridge:%d\n" 605 "Page_Select:%d Port_Select%d\n", 606 b.phy_id, b.r, b.cps, 607 b.rhb, b.ibr, b.gap_count, 608 b.extended, b.num_ports, 609 b.phy_speed, b.delay, 610 b.lctrl, b.c, b.jitter, b.pwr_class, 611 b.wdie, b.isbr, b.ctoi, b.cpsi, b.stoi, b.pei, b.eaa, b.emc, 612 b.legacy_spd, b.blink, b.bridge, 613 b.page_select, b.port_select 614 ); 615 616 for (i = 0; i < b.num_ports; i ++) { 617 printf("\n=== page 0 port %d ===\n", i); 618 read_phy_page(fd, (u_int8_t *)&p, 0, i); 619 printf( 620 "Astat:%d BStat:%d Ch:%d Con:%d RXOK:%d Dis:%d\n" 621 "Negotiated_speed:%d PIE:%d Fault:%d Stanby_fault:%d Disscrm:%d B_Only:%d\n" 622 "DC_connected:%d Max_port_speed:%d LPP:%d Cable_speed:%d\n" 623 "Connection_unreliable:%d Beta_mode:%d\n" 624 "Port_error:0x%x\n" 625 "Loop_disable:%d In_standby:%d Hard_disable:%d\n", 626 p.astat, p.bstat, p.ch, p.con, p.rxok, p.dis, 627 p.negotiated_speed, p.pie, p.fault, p.stanby_fault, p.disscrm, p.b_only, 628 p.dc_connected, p.max_port_speed, p.lpp, p.cable_speed, 629 p.connection_unreliable, p.beta_mode, 630 p.port_error, 631 p.loop_disable, p.in_standby, p.hard_disable 632 ); 633 } 634 printf("\n=== page 1 ===\n"); 635 read_phy_page(fd, (u_int8_t *)&v, 1, 0); 636 printf( 637 "Compliance:%d\n" 638 "Vendor_ID:0x%06x\n" 639 "Product_ID:0x%06x\n", 640 v.compliance, 641 (v.vendor_id[0] << 16) | (v.vendor_id[1] << 8) | v.vendor_id[2], 642 (v.product_id[0] << 16) | (v.product_id[1] << 8) | v.product_id[2] 643 ); 644 } 645 646 static int 647 open_dev(int *fd, char *devname) 648 { 649 if (*fd < 0) { 650 *fd = open(devname, O_RDWR); 651 if (*fd < 0) 652 return(-1); 653 654 } 655 return(0); 656 } 657 658 static void 659 sysctl_set_int(const char *name, int val) 660 { 661 if (sysctlbyname(name, NULL, NULL, &val, sizeof(int)) < 0) 662 err(1, "sysctl %s failed.", name); 663 } 664 665 static fwmethod * 666 detect_recv_fn(int fd, char ich) 667 { 668 char *buf; 669 struct fw_isochreq isoreq; 670 struct fw_isobufreq bufreq; 671 int len; 672 u_int32_t *ptr; 673 struct ciphdr *ciph; 674 fwmethod *retfn; 675 #define RECV_NUM_PACKET 16 676 #define RECV_PACKET_SZ 1024 677 678 bufreq.rx.nchunk = 8; 679 bufreq.rx.npacket = RECV_NUM_PACKET; 680 bufreq.rx.psize = RECV_PACKET_SZ; 681 bufreq.tx.nchunk = 0; 682 bufreq.tx.npacket = 0; 683 bufreq.tx.psize = 0; 684 685 if (ioctl(fd, FW_SSTBUF, &bufreq) < 0) 686 err(EX_IOERR, "%s: ioctl FW_SSTBUF", __func__); 687 688 isoreq.ch = ich & 0x3f; 689 isoreq.tag = (ich >> 6) & 3; 690 691 if (ioctl(fd, FW_SRSTREAM, &isoreq) < 0) 692 err(EX_IOERR, "%s: ioctl FW_SRSTREAM", __func__); 693 694 buf = (char *)malloc(RECV_NUM_PACKET * RECV_PACKET_SZ); 695 if (buf == NULL) 696 err(EX_SOFTWARE, "%s:buf malloc", __func__); 697 /* 698 * fwdev.c seems to return EIO on error and 699 * the return value of the last uiomove 700 * on success. For now, checking that the 701 * return is not less than zero should be 702 * sufficient. fwdev.c::fw_read() should 703 * return the total length read, not the value 704 * of the last uiomove(). 705 */ 706 len = read(fd, buf, RECV_NUM_PACKET * RECV_PACKET_SZ); 707 if (len < 0) 708 err(EX_IOERR, "%s: error reading from device", __func__); 709 ptr = (u_int32_t *) buf; 710 ciph = (struct ciphdr *)(ptr + 1); 711 712 switch(ciph->fmt) { 713 case CIP_FMT_DVCR: 714 fprintf(stderr, "Detected DV format on input.\n"); 715 retfn = dvrecv; 716 break; 717 case CIP_FMT_MPEG: 718 fprintf(stderr, "Detected MPEG TS format on input.\n"); 719 retfn = mpegtsrecv; 720 break; 721 default: 722 errx(1, "Unsupported format for receiving: fmt=0x%x", ciph->fmt); 723 } 724 free(buf); 725 return retfn; 726 } 727 728 int 729 main(int argc, char **argv) 730 { 731 #define MAX_BOARDS 10 732 u_int32_t crom_buf[1024/4]; 733 u_int32_t crom_buf_hex[1024/4]; 734 char devbase[64]; 735 const char *device_string = "/dev/fw"; 736 int fd = -1, ch, len=1024; 737 int32_t current_board = 0; 738 /* 739 * If !command_set, then -u will display the nodes for the board. 740 * This emulates the previous behavior when -u is passed by itself 741 */ 742 bool command_set = false; 743 bool open_needed = false; 744 long tmp; 745 struct fw_eui64 eui; 746 struct eui64 target; 747 fwmethod *recvfn = NULL; 748 /* 749 * Holders for which functions 750 * to iterate through 751 */ 752 bool display_board_only = false; 753 bool display_crom = false; 754 bool send_bus_reset = false; 755 bool display_crom_hex = false; 756 bool load_crom_from_file = false; 757 bool set_fwmem_target = false; 758 bool dump_topology = false; 759 bool dump_phy_reg = false; 760 761 int32_t priority_budget = -1; 762 int32_t set_root_node = -1; 763 int32_t set_gap_count = -1; 764 int32_t send_link_on = -1; 765 int32_t send_reset_start = -1; 766 767 char *crom_string = NULL; 768 char *crom_string_hex = NULL; 769 char *recv_data = NULL; 770 char *send_data = NULL; 771 772 if (argc < 2) { 773 for (current_board = 0; current_board < MAX_BOARDS; current_board++) { 774 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 775 if (open_dev(&fd, devbase) < 0) { 776 if (current_board == 0) { 777 usage(); 778 err(EX_IOERR, "%s: Error opening firewire controller #%d %s", 779 __func__, current_board, devbase); 780 } 781 return(EIO); 782 } 783 list_dev(fd); 784 close(fd); 785 fd = -1; 786 } 787 } 788 /* 789 * Parse all command line options, then execute requested operations. 790 */ 791 while ((ch = getopt(argc, argv, "M:f:g:m:o:s:b:prtc:d:l:u:R:S:")) != -1) { 792 switch(ch) { 793 case 'b': 794 priority_budget = strtol(optarg, NULL, 0); 795 if (priority_budget < 0 || priority_budget > INT32_MAX) 796 errx(EX_USAGE, "%s: priority_budget out of range: %s", __func__, optarg); 797 command_set = true; 798 open_needed = true; 799 display_board_only = false; 800 break; 801 case 'c': 802 crom_string = malloc(strlen(optarg)+1); 803 if (crom_string == NULL) 804 err(EX_SOFTWARE, "%s:crom_string malloc", __func__); 805 if ( (strtol(crom_string, NULL, 0) < 0) || strtol(crom_string, NULL, 0) > MAX_BOARDS) 806 errx(EX_USAGE, "%s:Invalid value for node", __func__); 807 strcpy(crom_string, optarg); 808 display_crom = 1; 809 open_needed = true; 810 command_set = true; 811 display_board_only = false; 812 break; 813 case 'd': 814 crom_string_hex = malloc(strlen(optarg)+1); 815 if (crom_string_hex == NULL) 816 err(EX_SOFTWARE, "%s:crom_string_hex malloc", __func__); 817 strcpy(crom_string_hex, optarg); 818 display_crom_hex = 1; 819 open_needed = true; 820 command_set = true; 821 display_board_only = false; 822 break; 823 case 'f': 824 #define MAX_PHY_CONFIG 0x3f 825 set_root_node = strtol(optarg, NULL, 0); 826 if ( (set_root_node < 0) || (set_root_node > MAX_PHY_CONFIG) ) 827 errx(EX_USAGE, "%s:set_root_node out of range", __func__); 828 open_needed = true; 829 command_set = true; 830 display_board_only = false; 831 break; 832 case 'g': 833 set_gap_count = strtol(optarg, NULL, 0); 834 if ( (set_gap_count < 0) || (set_gap_count > MAX_PHY_CONFIG) ) 835 errx(EX_USAGE, "%s:set_gap_count out of range", __func__); 836 open_needed = true; 837 command_set = true; 838 display_board_only = false; 839 break; 840 case 'l': 841 load_crom_from_file = 1; 842 load_crom(optarg, crom_buf); 843 command_set = true; 844 display_board_only = false; 845 break; 846 case 'm': 847 set_fwmem_target = 1; 848 open_needed = 0; 849 command_set = true; 850 display_board_only = false; 851 if (eui64_hostton(optarg, &target) != 0 && 852 eui64_aton(optarg, &target) != 0) 853 errx(EX_USAGE, "%s: invalid target: %s", __func__, optarg); 854 break; 855 case 'o': 856 send_link_on = str2node(fd, optarg); 857 if ( (send_link_on < 0) || (send_link_on > MAX_PHY_CONFIG) ) 858 errx(EX_USAGE, "%s: node out of range: %s\n",__func__, optarg); 859 open_needed = true; 860 command_set = true; 861 display_board_only = false; 862 break; 863 case 'p': 864 dump_phy_reg = 1; 865 open_needed = true; 866 command_set = true; 867 display_board_only = false; 868 break; 869 case 'r': 870 send_bus_reset = 1; 871 open_needed = true; 872 command_set = true; 873 display_board_only = false; 874 break; 875 case 's': 876 send_reset_start = str2node(fd, optarg); 877 if ( (send_reset_start < 0) || (send_reset_start > MAX_PHY_CONFIG) ) 878 errx(EX_USAGE, "%s: node out of range: %s\n", __func__, optarg); 879 open_needed = true; 880 command_set = true; 881 display_board_only = false; 882 break; 883 case 't': 884 dump_topology = 1; 885 open_needed = true; 886 command_set = true; 887 display_board_only = false; 888 break; 889 case 'u': 890 if(!command_set) 891 display_board_only = true; 892 current_board = strtol(optarg, NULL, 0); 893 open_needed = true; 894 break; 895 case 'M': 896 switch (optarg[0]) { 897 case 'm': 898 recvfn = mpegtsrecv; 899 break; 900 case 'd': 901 recvfn = dvrecv; 902 break; 903 default: 904 errx(EX_USAGE, "unrecognized method: %s", 905 optarg); 906 } 907 command_set = true; 908 display_board_only = false; 909 break; 910 case 'R': 911 recv_data = malloc(strlen(optarg)+1); 912 if (recv_data == NULL) 913 err(EX_SOFTWARE, "%s:recv_data malloc", __func__); 914 strcpy(recv_data, optarg); 915 open_needed = false; 916 command_set = true; 917 display_board_only = false; 918 break; 919 case 'S': 920 send_data = malloc(strlen(optarg)+1); 921 if (send_data == NULL) 922 err(EX_SOFTWARE, "%s:send_data malloc", __func__); 923 strcpy(send_data, optarg); 924 open_needed = true; 925 command_set = true; 926 display_board_only = false; 927 break; 928 case '?': 929 default: 930 usage(); 931 warnc(EINVAL, "%s: Unknown command line arguments", __func__); 932 return 0; 933 } 934 } /* end while */ 935 936 /* 937 * Catch the error case when the user 938 * executes the command with non ''-'' 939 * delimited arguments. 940 * Generate the usage() display and exit. 941 */ 942 if (!command_set && !display_board_only) { 943 usage(); 944 warnc(EINVAL, "%s: Unknown command line arguments", __func__); 945 return 0; 946 } 947 948 /* 949 * If -u <bus_number> is passed, execute 950 * command for that card only. 951 * 952 * If -u <bus_number> is not passed, execute 953 * command for card 0 only. 954 * 955 */ 956 if(open_needed){ 957 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 958 if (open_dev(&fd, devbase) < 0) { 959 err(EX_IOERR, "%s: Error opening firewire controller #%d %s", __func__, current_board, devbase); 960 } 961 } 962 /* 963 * display the nodes on this board "-u" 964 * only 965 */ 966 if (display_board_only) 967 list_dev(fd); 968 969 /* 970 * dump_phy_reg "-p" 971 */ 972 if (dump_phy_reg) 973 dump_phy_registers(fd); 974 975 /* 976 * send a BUS_RESET Event "-r" 977 */ 978 if (send_bus_reset) { 979 if(ioctl(fd, FW_IBUSRST, &tmp) < 0) 980 err(EX_IOERR, "%s: Ioctl of bus reset failed for %s", __func__, devbase); 981 } 982 /* 983 * Print out the CROM for this node "-c" 984 */ 985 if (display_crom) { 986 tmp = str2node(fd, crom_string); 987 get_crom(fd, tmp, crom_buf, len); 988 show_crom(crom_buf); 989 free(crom_string); 990 } 991 /* 992 * Hex Dump the CROM for this node "-d" 993 */ 994 if (display_crom_hex) { 995 tmp = str2node(fd, crom_string_hex); 996 get_crom(fd, tmp, crom_buf_hex, len); 997 dump_crom(crom_buf_hex); 998 free(crom_string_hex); 999 } 1000 /* 1001 * Set Priority Budget to value for this node "-b" 1002 */ 1003 if (priority_budget >= 0) 1004 set_pri_req(fd, priority_budget); 1005 1006 /* 1007 * Explicitly set the root node of this bus to value "-f" 1008 */ 1009 if (set_root_node >= 0) 1010 send_phy_config(fd, set_root_node, -1); 1011 1012 /* 1013 * Set the gap count for this card/bus "-g" 1014 */ 1015 if (set_gap_count >= 0) 1016 send_phy_config(fd, -1, set_gap_count); 1017 1018 /* 1019 * Load a CROM from a file "-l" 1020 */ 1021 if (load_crom_from_file) 1022 show_crom(crom_buf); 1023 /* 1024 * Set the fwmem target for a node to argument "-m" 1025 */ 1026 if (set_fwmem_target) { 1027 eui.hi = ntohl(*(u_int32_t*)&(target.octet[0])); 1028 eui.lo = ntohl(*(u_int32_t*)&(target.octet[4])); 1029 #if defined(__FreeBSD__) 1030 sysctl_set_int("hw.firewire.fwmem.eui64_hi", eui.hi); 1031 sysctl_set_int("hw.firewire.fwmem.eui64_lo", eui.lo); 1032 #elif defined(__NetBSD__) 1033 sysctl_set_int("hw.fwmem.eui64_hi", eui.hi); 1034 sysctl_set_int("hw.fwmem.eui64_lo", eui.lo); 1035 #else 1036 #warning "You need to add support for your OS" 1037 #endif 1038 1039 } 1040 1041 /* 1042 * Send a link on to this board/bus "-o" 1043 */ 1044 if (send_link_on >= 0) 1045 link_on(fd, send_link_on); 1046 1047 /* 1048 * Send a reset start to this board/bus "-s" 1049 */ 1050 if (send_reset_start >= 0) 1051 reset_start(fd, send_reset_start); 1052 1053 /* 1054 * Dump the node topology for this board/bus "-t" 1055 */ 1056 if (dump_topology) 1057 show_topology_map(fd); 1058 1059 /* 1060 * Receive data file from node "-R" 1061 */ 1062 #define TAG (1<<6) 1063 #define CHANNEL 63 1064 if (recv_data != NULL){ 1065 if (recvfn == NULL) { /* guess... */ 1066 recvfn = detect_recv_fn(fd, TAG | CHANNEL); 1067 close(fd); 1068 fd = -1; 1069 } 1070 snprintf(devbase, sizeof(devbase), "%s%d.0", device_string, current_board); 1071 if (open_dev(&fd, devbase) < 0) 1072 err(EX_IOERR, "%s: Error opening firewire controller #%d %s in recv_data\n", __func__, current_board, devbase); 1073 (*recvfn)(fd, recv_data, TAG | CHANNEL, -1); 1074 free(recv_data); 1075 } 1076 1077 /* 1078 * Send data file to node "-S" 1079 */ 1080 if (send_data != NULL){ 1081 dvsend(fd, send_data, TAG | CHANNEL, -1); 1082 free(send_data); 1083 } 1084 1085 if (fd > 0) { 1086 close(fd); 1087 fd = -1; 1088 } 1089 return 0; 1090 } 1091