1 /* 2 * PCMCIA card structures and defines. 3 * These defines relate to the user level 4 * structures and card information, not 5 * driver/process communication. 6 *------------------------------------------------------------------------- 7 */ 8 /*- 9 * SPDX-License-Identifier: BSD-3-Clause 10 * 11 * Copyright (c) 1995 Andrew McRae. All rights reserved. 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 1. Redistributions of source code must retain the above copyright 17 * notice, this list of conditions and the following disclaimer. 18 * 2. Redistributions in binary form must reproduce the above copyright 19 * notice, this list of conditions and the following disclaimer in the 20 * documentation and/or other materials provided with the distribution. 21 * 3. The name of the author may not be used to endorse or promote products 22 * derived from this software without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 25 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 26 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 27 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 28 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 29 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 30 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 31 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 32 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 33 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 * 35 * $FreeBSD$ 36 * 37 */ 38 39 /* 40 * Card Information Structure tuples definitions 41 * The structure of a tuple is basically: 42 * 43 * Tuple_code 44 * Tuple_data_length 45 * Tuple_data ... 46 * 47 * Tuples are contiguous in attribute memory, and 48 * are terminated with a 0xFF for the tuple code or 49 * the tuple length. 50 */ 51 #ifndef _PCCARD_CIS_H 52 #define _PCCARD_CIS_H 53 54 #define CIS_NULL 0 /* Empty tuple */ 55 #define CIS_MEM_COMMON 0x01 /* Device descriptor, common memory */ 56 #define CIS_LONGLINK_CB 0x02 /* Long link to next chain for CardBus */ 57 #define CIS_INDIRECT 0x03 /* Indirect access */ 58 #define CIS_CONF_MAP_CB 0x04 /* Card Configuration map for CardBus */ 59 #define CIS_CONFIG_CB 0x05 /* Card Configuration entry for CardBus */ 60 #define CIS_LONGLINK_MFC 0x06 /* Long link to next chain for Multi function card */ 61 #define CIS_BAR 0x07 /* Base address register for CardBus */ 62 #define CIS_CHECKSUM 0x10 /* Checksum */ 63 #define CIS_LONGLINK_A 0x11 /* Link to Attribute memory */ 64 #define CIS_LONGLINK_C 0x12 /* Link to Common memory */ 65 #define CIS_LINKTARGET 0x13 /* Linked tuple must start with this. */ 66 #define CIS_NOLINK 0x14 /* Assume no common memory link tuple. */ 67 #define CIS_INFO_V1 0x15 /* Card info data, version 1 */ 68 #define CIS_ALTSTR 0x16 /* Alternate language string tuple. */ 69 #define CIS_MEM_ATTR 0x17 /* Device descriptor, Attribute memory */ 70 #define CIS_JEDEC_C 0x18 /* JEDEC descr for common memory */ 71 #define CIS_JEDEC_A 0x19 /* JEDEC descr for Attribute memory */ 72 #define CIS_CONF_MAP 0x1A /* Card Configuration map */ 73 #define CIS_CONFIG 0x1B /* Card Configuration entry */ 74 #define CIS_DEVICE_OC 0x1C /* Other conditions info - common memory */ 75 #define CIS_DEVICE_OA 0x1D /* Other conditions info - attribute memory */ 76 #define CIS_DEVICEGEO 0x1E /* Geometry info for common memory */ 77 #define CIS_DEVICEGEO_A 0x1F /* Geometry info for attribute memory */ 78 #define CIS_MANUF_ID 0x20 /* Card manufacturer's ID */ 79 #define CIS_FUNC_ID 0x21 /* Function of card */ 80 #define CIS_FUNC_EXT 0x22 /* Functional extension */ 81 /* 82 * Data recording format tuples. 83 */ 84 #define CIS_SW_INTERLV 0x23 /* Software interleave */ 85 #define CIS_VERS_2 0x40 /* Card info data, version 2 */ 86 #define CIS_FORMAT 0x41 /* Memory card format */ 87 #define CIS_GEOMETRY 0x42 /* Disk sector layout */ 88 #define CIS_BYTEORDER 0x43 /* Byte order of memory data */ 89 #define CIS_DATE 0x44 /* Format data/time */ 90 #define CIS_BATTERY 0x45 /* Battery replacement date */ 91 #define CIS_ORG 0x46 /* Organization of data on card */ 92 #define CIS_END 0xFF /* Termination code */ 93 94 /* 95 * Internal tuple definitions. 96 * 97 * Device descriptor for memory (CIS_MEM_ATTR, CIS_MEM_COMMON) 98 * 99 * Byte 1: 100 * 0xF0 - Device type 101 * 0x08 - Write protect switch 102 * 0x07 - Speed index (7 = extended speed) 103 * Byte 2: Extended speed (bit 7 = another follows) 104 * Byte 3: (ignored if 0xFF) 105 * 0xF8 - Addressable units (0's numbered) 106 * 0x07 - Unit size 107 * The three byte sequence is repeated until byte 1 == 0xFF 108 */ 109 110 /* 111 * CIS_INFO_V1 - Version one card information. 112 * 113 * Byte 1: Major version number (should be 4) 114 * Byte 2: Minor version number (should be 1) 115 * Byte 3-x: Null terminated Manufacturer name 116 * Byte x-x: Null terminated product name 117 * Byte x-x: Null terminated additional info 1 118 * Byte x-x: Null terminated additional info 2 119 * Byte x: final byte must be 0xFF 120 */ 121 #define CIS_MAJOR_VERSION 4 122 #define CIS_MINOR_VERSION 1 123 124 /* 125 * CIS_CONF_MAP - Provides an address map for the card 126 * configuration register(s), and a max value 127 * identifying the last configuration tuple. 128 * 129 * Byte 1: 130 * 0x3C - Register mask size (0's numbered) 131 * 0x03 - Register address size (0's numbered) 132 * Byte 2: 133 * 0x3F - ID of last configuration. 134 * Byte 3-n: Card register address (size is determined by 135 * the value in byte 1). 136 * Byte x-x: Card register masks (size determined by the 137 * value in byte 1) 138 */ 139 140 /* 141 * CIS_CONFIG - Card configuration entry. Multiple tuples may 142 * exist of this type, each one describing a different 143 * memory/I-O map that can be used to address this card. 144 * The first one usually has extra config data about the 145 * card features. The final configuration tuple number 146 * is stored in the CIS_CONF_MAP tuple so that the complete 147 * list can be scanned. 148 * 149 * Byte 1: 150 * 0x3F - Configuration ID number. 151 * 0x40 - Indicates this is the default configuration 152 * 0x80 - Interface byte exists 153 * Byte 2: (exists only if bit 0x80 set in byte 1) 154 * 0x0F - Interface type value 155 * 0x10 - Battery voltage detect 156 * 0x20 - Write protect active 157 * 0x40 - RdyBsy active bit 158 * 0x80 - Wait signal required 159 * Byte 3: (features byte) 160 * 0x03 - Power sub-tuple(s) exists 161 * 0x04 - Timing sub-tuple exists 162 * 0x08 - I/O space sub-tuple exists 163 * 0x10 - IRQ sub-tuple exists 164 * 0x60 - Memory space sub-tuple(s) exists 165 * 0x80 - Miscellaneous sub-tuple exists 166 */ 167 #define CIS_FEAT_POWER(x) ((x) & 0x3) 168 #define CIS_FEAT_TIMING 0x4 169 #define CIS_FEAT_I_O 0x8 170 #define CIS_FEAT_IRQ 0x10 171 #define CIS_FEAT_MEMORY(x) (((x) >> 5) & 0x3) 172 #define CIS_FEAT_MISC 0x80 173 /* 174 * Depending on whether the "features" byte has the corresponding 175 * bit set, a number of sub-tuples follow. Some features have 176 * more than one sub-tuple, depending on the count within the 177 * features byte (e.g power feature bits allows up to 3 sub-tuples). 178 * 179 * Power structure sub-tuple: 180 * Byte 1: parameter exists - Each bit (starting from 0x01) indicates 181 * that a parameter block exists - up to 8 parameter blocks 182 * are therefore allowed). 183 * Byte 2: 184 * 0x7F - Parameter data 185 * 0x80 - More bytes follow (0 = last byte) 186 * 187 * Timing sub-tuple 188 * Byte 1: 189 * 0x03 - Wait scale 190 * 0x1C - Ready scale 191 * 0xE0 - Reserved scale 192 * Byte 2: extended wait scale if wait scale != 3 193 * Byte 3: extended ready scale if ready scale != 7 194 * Byte 4: extended reserved scale if reserved scale != 7 195 */ 196 #define CIS_WAIT_SCALE(x) ((x) & 0x3) 197 #define CIS_READY_SCALE(x) (((x)>>2) & 0x7) 198 #define CIS_RESERVED_SCALE(x) (((x)>>5) & 0x7) 199 /* 200 * I/O mapping sub-tuple: 201 * Byte 1: 202 * 0x1F - I/O address lines 203 * 0x20 - 8 bit I/O 204 * 0x40 - 16 bit I/O 205 * 0x80 - I/O range?? 206 * Byte 2: 207 * 0x0F - 0's numbered count of I/O block subtuples following. 208 * 0x30 - Size of I/O address value within subtuple. Values 209 * can be 1 (8 bits), 2 (16 bits) or 3 (32 bits). 210 * 0xC0 - Size of I/O port block size value within subtuple. 211 * I/O block sub-tuples, count from previous block: 212 * Byte 1-n: I/O start address 213 * Byte x-x: Size of I/O port block. 214 */ 215 #define CIS_IO_ADDR(x) ((x) & 0x1F) 216 #define CIS_IO_8BIT 0x20 217 #define CIS_IO_16BIT 0x40 218 #define CIS_IO_RANGE 0x80 219 #define CIS_IO_BLKS(x) ((x) & 0xF) 220 #define CIS_IO_ADSZ(x) (((x)>>4) & 3) 221 #define CIS_IO_BLKSZ(x) (((x)>>6) & 3) 222 /* 223 * IRQ sub-tuple. 224 * Byte 1: 225 * 0x0F - Irq number or mask bits 226 * 0x10 - IRQ mask values exist 227 * 0x20 - Level triggered interrupts 228 * 0x40 - Pulse triggered requests 229 * 0x80 - Interrupt sharing. 230 * Byte 2-3: Interrupt req mask (if 0x10 of byte 1 set). 231 */ 232 #define CIS_IRQ_IRQN(x) ((x) & 0xF) 233 #define CIS_IRQ_MASK 0x10 234 #define CIS_IRQ_LEVEL 0x20 235 #define CIS_IRQ_PULSE 0x40 236 #define CIS_IRQ_SHARING 0x80 237 /* 238 * Memory block subtuple. Depending on the features bits, the 239 * following subtuples are used: 240 * mem features == 1 241 * Byte 1-2: upper 16 bits of 24 bit memory length. 242 * mem features == 2 243 * Byte 1-2: upper 16 bits of 24 bit memory length. 244 * Byte 3-4: upper 16 bits of 24 bit memory address. 245 * mem_features == 3 246 * Byte 1: 247 * 0x07 - 0's numbered count of memory sub-tuples 248 * 0x18 - Memory length size (1's numbered) 249 * 0x60 - Memory address size (1's numbered) 250 * 0x80 - Host address value exists 251 * Memory sub-tuples follow: 252 * Byte 1-n: Memory length value (<< 8) 253 * Byte n-n: Memory card address value (<< 8) 254 * Byte n-n: Memory host address value (<< 8) 255 */ 256 #define CIS_FEAT_MEM_NONE 0 /* No memory config */ 257 #define CIS_FEAT_MEM_LEN 1 /* Just length */ 258 #define CIS_FEAT_MEM_ADDR 2 /* Card address & length */ 259 #define CIS_FEAT_MEM_WIN 3 /* Multiple windows */ 260 261 #define CIS_MEM_WINS(x) (((x) & 0x7)+1) 262 #define CIS_MEM_LENSZ(x) (((x) >> 3) & 0x3) 263 #define CIS_MEM_ADDRSZ(x) (((x) >> 5) & 0x3) 264 #define CIS_MEM_HOST 0x80 265 /* 266 * Misc sub-tuple. 267 * Byte 1: 268 * Byte 2: 269 * 0x0c - DMA Request Signal 270 * 00 - not support DMA 271 * 01 - use SPKR# line 272 * 10 - use IOIS16# line 273 * 11 - use INPACK# line 274 * 0x10 - DMA Width 275 * 0 - 8 bit DMA 276 * 1 - 16 bit DMA 277 */ 278 #define CIS_MISC_DMA_WIDTH(x) (((x) & 0x10) >> 4) 279 #define CIS_MISC_DMA_REQ(x) (((x) >> 2) & 0x3) 280 281 #endif /* _PCCARD_CIS_H */ 282