1.\" Copyright (c) 2015, 2018 Chelsio Inc 2.\" All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions are met: 6.\" 7.\" 1. Redistributions of source code must retain the above copyright notice, 8.\" this list of conditions and the following disclaimer. 9.\" 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 14.\" 3. Neither the name of the Chelsio Inc nor the names of its 15.\" contributors may be used to endorse or promote products derived from 16.\" this software without specific prior written permission. 17.\" 18.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 22.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28.\" POSSIBILITY OF SUCH DAMAGE. 29.\" 30.\" * Other names and brands may be claimed as the property of others. 31.\" 32.\" $FreeBSD$ 33.\" 34.Dd Sep 21, 2018 35.Dt CXGBETOOL 8 36.Os 37.Sh NAME 38.Nm cxgbetool 39.Nd Userspace companion to 40.Xr cxgbe 4 41.Sh SYNOPSIS 42.Bl -item -compact 43.It 44.Nm Ar nexus command Op Ar parameter ... 45.Pp 46.It 47.Nm Ar nexus Cm clearstats Ar port_id 48.It 49.Nm Ar nexus Cm context Bro Cm ingress | egress | fl | cong Brc Ar cntxt_id 50.It 51.Nm Ar nexus Cm hashfilter mode 52.It 53.Nm Ar nexus Cm hashfilter Ar filter-specification 54.It 55.Nm Ar nexus Cm hashfilter Ar idx Cm delete 56.It 57.Nm Ar nexus Cm hashfilter list 58.It 59.Nm Ar nexus Cm filter mode 60.It 61.Nm Ar nexus Cm filter Ar idx Ar filter-specification 62.It 63.Nm Ar nexus Cm filter Ar idx Cm delete Op Cm prio Bro Cm 0 | 1 Brc 64.It 65.Nm Ar nexus Cm filter list 66.It 67.Nm Ar nexus Cm i2c Ar port_id devaddr addr Op Ar len 68.It 69.Nm Ar nexus Cm loadcfg Ar fw-config.txt 70.It 71.Nm Ar nexus Cm loadcfg clear 72.It 73.Nm Ar nexus Cm loadfw Ar fw-image.bin 74.It 75.Nm Ar nexus Cm memdump Ar addr len 76.It 77.Nm Ar nexus Cm policy Ar cop.txt 78.It 79.Nm Ar nexus Cm policy clear 80.It 81.Nm Ar nexus Bro Cm reg | reg64 Brc Ar addr Ns Op Ar =val 82.It 83.Nm Ar nexus Cm regdump Op Ar register-block ... 84.It 85.Nm Ar nexus Cm sched-class Ar sub-command Op Ar param Ar value 86.It 87.Nm Ar nexus Cm sched-queue Ar port Ar queue Ar class 88.It 89.Nm Ar nexus Cm stdio 90.It 91.Nm Ar nexus Cm tcb Ar tid 92.El 93.Sh DESCRIPTION 94.Nm 95provides command-line access to features and debug facilities exported by 96.Xr cxgbe 4 97via private ioctls. 98The target nexus device, 99.Va t4nex%d 100, is always the first argument. 101(The parent nexus for an Ethernet port 102.Va cxgbe%d 103is listed in 104.Va dev.cxgbe.%d.%parent 105in the 106.Xr sysctl 8 107MIB). 108The rest consists of a command and any parameters required by that command. 109.Ss Commands 110.Bl -ohang 111.It Cm clearstats Ar port_id 112Clear all transmit, receive, and error statistics of all queues associated 113with a port. 114The total number of ports attached to a nexus is listed in 115.Va dev.t4nex.%d.nports 116and the 0 based 117.Ar port_id 118identifies a port within this range. 119.Pp 120.Bl -item -compact 121.It 122.Cm context ingress Ar ingress_cntxt_id 123.It 124.Cm context cong Ar ingress_cntxt_id 125.It 126.Cm context egress Ar egress_cntxt_id 127.It 128.Cm context fl Ar flm_cntxt_id 129.El 130Display hardware context for an ingress queue, congestion manager, egress 131queue, or freelist manager. 132.Bl -tag -width ingress_cntxt_id -compact 133.It Ar ingress_cntxt_id 134context id of an ingress queue -- the value listed in one of 135.Va dev.t4nex.%d.fwq.cntxt_id Ns , 136.Va dev.cxgbe.%d.rxq.%d.cntxt_id Ns , 137or 138.Va dev.cxgbe.%d.ofld_rxq.%d.cntxt_id Ns . 139.It Ar egress_cntxt_id 140context id of an egress queue -- the value listed in one of 141.Va dev.t4nex.%d.mgmtq.cntxt_id Ns , 142.Va dev.cxgbe.%d.txq.%d.cntxt_id Ns , 143.Va dev.cxgbe.%d.ctrlq.%d.cntxt_id Ns , 144.Va dev.cxgbe.%d.ofld_txq.%d.cntxt_id Ns , 145.Va dev.cxgbe.%d.rxq.%d.fl.cntxt_id Ns , 146or 147.Va dev.cxgbe.%d.ofld_rxq.%d.fl.cntxt_id Ns . 148Note that freelists are egress queues too. 149.It Ar flm_cntxt_id 150context id of a freelist manager. 151The FLM context id is displayed in the 152egress context dump of a freelist as FLMcontextID. 153.El 154.Pp 155.Bl -item -compact 156.It 157.Cm hashfilter mode 158.It 159.Cm filter mode 160.El 161Display a list of match-criteria available for use in filter rules. 162A full list of match-criteria known to the chip is in the table below but not 163all can be used together and the firmware sets up the available parameters based 164on "filterMode" in the configuration file. 165Every filter must conform to the filter mode -- multiple match criteria per 166filter are allowed but only from among those in the current setting of the 167filter mode. 168The filter mode for hash filters is a subset of that for normal TCAM filters and 169depends on the "filterMask" setting in the firmware configuration file. 170Hash filters do not support masked matches and an exact value for every 171parameter in the output of "hashfilter mode" (except ipv4/ipv6) must be provided 172when creating a hash filter. 173.Pp 174(Note that 175.Ar mask 176defaults to all 1s when not provided explicitly. 177Hash filters do not support masked matches. 178Also note that many of the items being matched are discrete numeric 179values rather than bit fields and should be masked with caution.) 180.TS 181center expand; 182cb cb cbw(40m) 183cb l l. 184Criteria Usage Matches if ... 185_ 186ipv4 T{ 187.Cm type ipv4 188T} T{ 189incoming packet is an IPv4 datagram. 190T} 191_ 192ipv6 T{ 193.Cm type ipv6 194T} T{ 195incoming packet is an IPv6 datagram. 196T} 197_ 198sip T{ 199.Cm sip Ar addr Ns Op / Ns Ar mask 200T} T{ 201bitwise and of the source address in an incoming IP datagram with 202.Ar mask 203equals 204.Ar addr Ns . 205.Ar addr 206can be an IPv4 or IPv6 address. 207T} 208_ 209dip T{ 210.Cm dip Ar addr Ns Op / Ns Ar mask 211T} T{ 212bitwise and of the destination address in an incoming IP datagram with 213.Ar mask 214equals 215.Ar addr Ns . 216.Ar addr 217can be an IPv4 or IPv6 address. 218T} 219_ 220sport T{ 221.Cm sport Ar port Ns Op : Ns Ar mask 222T} T{ 223bitwise and of the source port in an incoming TCP or UDP datagram with 224.Ar mask 225equals 226.Ar port Ns . 227T} 228_ 229dport T{ 230.Cm dport Ar port Ns Op : Ns Ar mask 231T} T{ 232bitwise and of the destination port in an incoming TCP or UDP datagram with 233.Ar mask 234equals 235.Ar port Ns . 236T} 237_ 238fcoe T{ 239.Cm fcoe Brq 0 | 1 240T} T{ 241incoming frame is Fibre Channel over Ethernet(1) or not(0). 242T} 243_ 244iport T{ 245.Cm iport Ar val Ns Op : Ns Ar mask 246T} T{ 247bitwise and of the ingress port with 248.Ar mask 249equals 250.Ar val Ns . 251The ingress port is a 3 bit number that identifies the port on which a 252frame arrived. 253Physical ports are numbered 0-3 and 4-7 are internal loopback paths 254within the chip. 255Note that ingress port is not a bit field so it is not always possible 256to match an arbitrary subset of ingress ports with a single filter rule. 257T} 258_ 259ovlan T{ 260.Cm ovlan Ar tag Ns Op : Ns Ar mask 261T} T{ 262bitwise and of the 16-bit outer VLAN tag of an incoming frame with 263.Ar mask 264equals 265.Ar tag Ns . 266T} 267_ 268vlan T{ 269.Cm vlan Ar tag Ns Op : Ns Ar mask 270T} T{ 271bitwise and of the 16-bit VLAN tag of an incoming QinQ frame with 272.Ar mask 273equals 274.Ar tag Ns . 275The inner VLAN tag is used if the incoming frame is QinQ. 276T} 277_ 278tos T{ 279.Cm tos Ar val Ns Op : Ns Ar mask 280T} T{ 281bitwise and of the 8-bit IP Type of Service/IPv6 Traffic Class in an 282incoming packet with 283.Ar mask 284equals 285.Ar val Ns . 286T} 287_ 288proto T{ 289.Cm proto Ar ipproto Ns Op : Ns Ar mask 290T} T{ 291bitwise and of the 8-bit IP protocol in an incoming packet with 292.Ar mask 293equals 294.Ar ipproto Ns . 295T} 296_ 297ethtype T{ 298.Cm ethtype Ar type Ns Op : Ns Ar mask 299T} T{ 300bitwise and of the 16-bit Ethernet type field of an incoming frame with 301.Ar mask 302equals 303.Ar type Ns . 304T} 305_ 306macidx T{ 307.Cm macidx Ar idx Ns Op : Ns Ar mask 308T} T{ 309bitwise and of the MAC Address Match Index of an incoming frame with 310.Ar mask 311equals 312.Ar idx Ns . 313The MAC Address Match Index refers to an entry in the MPS TCAM or in the 314MPS hash. See 315.Cm matchtype 316for more information. 317T} 318_ 319matchtype T{ 320.Cm matchtype Ar type Ns Op : Ns Ar mask 321T} T{ 322bitwise and of the Match Type of an incoming frame with 323.Ar mask 324equals 325.Ar idx Ns . 326Match Type is one of the following: 327.Bl -tag -width "n" -compact 328.It 0 329destination MAC in incoming frame is a unicast L2 address that is 330programmed in the MPS TCAM. 331.Cm macidx 332can be used to match the index (and thus the MAC address) of the match 333in the TCAM. 334.It 1 335destination MAC in incoming frame is a unicast L2 address that "hit" a 336hash entry in the MPS hash table. 337.Cm macidx 338can be used to match the index of the entry in the MPS hash table. 339.It 2 340destination MAC in incoming frame is a multicast L2 address that is 341programmed in the MPS TCAM. 342.Cm macidx 343can be used to match the index (and thus the MAC address) of the match 344in the TCAM. 345.It 3 346destination MAC in incoming frame is a multicast L2 address that "hit" 347an entry in the MPS hash table. 348.It 4 349interface on which incoming frame was received is in promiscuous mode 350and the destination MAC in the frame is not a broadcast address, and 351does not match in the MPS TCAM or the MPS hash either. (The frame would 352have been discarded if the interface wasn't in promiscuous mode.) 353.It 5 354interface on which incoming frame was received is in promiscuous mode 355and the destination MAC in the frame is not a broadcast address; it 356wasn't looked up in the MPS TCAM or the MPS hash because the chip is 357configured to give precedence to promiscuous mode classification. 358.It 6 359destination MAC in incoming frame is a broadcast address. 360.It 7 361Not documented. Do not use. 362.El 363T} 364_ 365frag T{ 366.Cm frag Brq 0 | 1 367T} T{ 368incoming frame is part of a fragmented IP datagram(1) or not(0). 369T} 370.TE 371.Pp 372.Bl -item -compact 373.It 374.Cm hashfilter Ar filter-specification 375.It 376.Cm filter Ar idx Ar filter-specification 377.El 378Program a filter. 379.Pp 380TCAM filters: The number of available filters is in 381dev.<nexus>.<instance>.nfilters. 382.Ar idx 383must be an unused index between 0 and nfilters - 1. 384IPv6 filters consume 4 consecutive entries on T4/T5 and 2 on T6 and 385.Ar idx 386must be aligned to 4 or 2 in this case. 387.Pp 388Hash filters: These reside in the card's memory instead of its TCAM and are 389enabled with a special configuration file that is selected with 390.Cm hw.cxgbe.config_file="hashfilter" 391in loader.conf. 392There are at least half a million filters available with the sample config 393shipped with the driver. 394Note that the hardware selects the index for a hashfilter and this index is 395displayed when the filter is created. 396Hash and TCAM filters can be used together. 397.Pp 398.Ar filter-specification 399consists of one or more matches (see Usage in the table above) to try against an 400incoming frame, an action to perform when all matches succeed, and some 401additional operational parameters. 402Hashfilters require an exact value for the 5-tuple (sip, dip, sport, dport, 403proto) and for any other match-criteria listed in "hashfilter mode". 404Possible filter actions are 405.Cm drop Ns , 406.Cm pass Ns , or 407.Cm switch Ns . 408.Pp 409.Bl -tag -width nat_dport -offset indent -compact 410Operational parameters that can be used with all filters: 411.It Cm hitcnts 412Count filter hits: 0 or 1 (default). 413.It Cm prio 414Filter has priority over active and server regions of TCAM: 0 (default) or 1. 415.El 416.Pp 417.Bl -tag -width nat_dport -offset indent -compact 418Operational parameters that can be used with filters with 419.Cm action pass Ns : 420.It Cm queue 421Context id of an ingress queue to which to deliver the packet. 422The context id is available in 423.Va dev.cxgbe.%d.rxq.%d.cntxt_id . 424By default, packets that hit a filter with action pass are delivered based on 425their RSS hash as usual. 426Use this to steer them to a particular queue. 427.It Cm rpttid 428Report the filter tid instead of the RSS hash in the rx descriptor. 4290 (default) or 1. 430.It Cm tcbhash 431Select TCB hash information in rx descriptor. 4320 (default) or 1 433.El 434.Pp 435.Bl -tag -width nat_dport -offset indent -compact 436Operational parameters that can be used with filters with 437.Cm action switch Ns : 438.It Cm eport 439Egress port number on which to send the packet matching the filter. 4400 to dev.<nexus>.<instance>.nports - 1. 441.It Cm dmac 442Replace packet destination MAC address with the one provided before switching 443it out of eport. 444.It Cm smac 445Replace packet source MAC address with the one provided before switching it 446out of eport. 447.It Cm swapmac 448Swap packet source and destination MAC addresses before switching it out of 449eport. 450.It Cm vlan 451Insert, remove, or rewrite the VLAN tag before switching the packet out of 452eport. 453.Cm none 454removes the tag, 455.Cm = Ns Ar tag 456replaces the existing tag with the one provided, and 457.Cm + Ns Ar tag 458inserts the given tag into the frame. 459.It Cm nat 460Specify the desired NAT mode. Valid NAT modes values are: 461.Bl -tag -width dip-dp-sip -compact 462.It Cm dip 463Perform NAT on destination IP. 464.It Cm dip-dp 465Perform NAT on destination IP, destination port. 466.It Cm dip-dp-sip 467Perform NAT on destination IP, destination port, source IP. 468.It Cm dip-dp-sp 469Perform NAT on destination IP, destination port, source port. 470.It Cm sip-sp 471Perform NAT on source IP, source port. 472.It Cm dip-sip-sp 473Perform NAT on destination IP, source IP, source port. 474.It Cm all 475Perform NAT on all 4-tuple fields. 476.El 477.It Cm natflag 478Perform NAT only on segments which do not have TCP FIN or RST set. 479.It Cm natseq 480Perform NAT only if incoming segment's sequence number + payload length is less 481than this supplied value. 482.It Cm nat_dip 483Perform NAT using this destination IP. 484.It Cm nat_sip 485Perform NAT using this source IP. 486.It Cm nat_dport 487Perform NAT using this destination port. 488.It Cm nat_sport 489Perform NAT using this source port. 490Perform NAT only if incoming segment's sequence number + payload length is less 491than this supplied value. 492.El 493.Pp 494.Bl -item -compact 495.It 496.Cm hashfilter Ar idx Cm delete 497.It 498.Cm filter Ar idx Cm delete 499.El 500Delete filter that is at the given index. 501.It Cm filter Cm list 502List all filters programmed into the hardware. 503.It Cm i2c Ar port_id devaddr addr Op Ar len 504.It Cm loadcfg Ar fw-config.txt 505Install the firmware configuration file contained in 506.Ar fw-config.txt 507to the card. 508Set hw.cxgbe.config_file="flash" in loader.conf to get 509.Xr cxgbe 4 510to use the on-flash configuration. 511.It Cm loadcfg Cm clear 512Erase configuration file from the card. 513.It Cm loadfw Ar fw-image.bin 514Install the firmware contained in 515.Ar fw-image.bin 516to the card. 517.It Cm memdump Ar addr len 518Display 519.Ar len 520bytes of data of the card's memory starting at 521.Ar addr Ns . 522The card's memory map is available in 523.Va dev.t4nex.%d.misc.meminfo Ns . 524.It Cm policy Ar cop.txt 525Install the Connection Offload Policy (COP) in 526.Ar cop.txt Ns . 527A COP offers fine-grained control over which connections get offloaded and with 528what parameters. 529Set 530.Cm hw.cxgbe.cop_managed_offloading="1" 531in loader.conf to ensure that t4_tom will not offload any connection before a 532COP is installed. 533Note that t4_tom must be loaded and operational (IFCAP_TOE enabled) as always 534for any kind of offload based on the hardware TOE. 535.Bl -column -offset indent "COP installed" "cop_managed_offloading" "Behavior" 536.It Sy COP installed Ta Sy cop_managed_offloading Ta Sy Behavior 537.It NO Ta 0 Ta offload all [Default] 538.It NO Ta 1 Ta no offload 539.It YES Ta Don't Care Ta Rule based offload 540.El 541.Pp 542The policy file consists of empty lines, comments (lines begining with #) and 543any number of rules. 544Rules are applied in the order they appear in the file and processing stops at 545the first match. 546There is an implicit rule that disables offload for connections that do not 547match anything in the policy. 548.Pp 549Each rule consists of a filter part, which determines what connections the 550rule applies to, and a settings part, which determines whether matching 551connections will be offloaded and, if so, with what settings. 552The general form of a rule is 553.Bl -ohang -offset indent 554.It Cm \&[ Ar socket-type Cm \&] Ar pcap-filter Cm => Ar settings 555.Pp 556.Ar socket-type 557is one of the following. 558.Bl -tag -width "X" -compact 559.It Sy A 560Active open. 561Connection is being opened by this host. 562.It Sy P 563Passive open. 564Connection was requested by a peer. 565.It Sy L 566Listen called on a socket. 567Disabling offload in such a rule will prevent a hardware listener from being started. 568.It Sy D 569Don't care. 570Matches all of the above. 571.El 572.Pp 573.Ar pcap-filter 574is an expression that follows the 575.Xr pcap-filter 7 576syntax, or it is the keyword 577.Cm all 578that matches everything. 579.Pp 580.Ar settings 581determine whether connections matching 582.Ar socket-type 583and 584.Ar pcap-filter 585are offloaded and optionally sets some per-connection properties if they are. 586A combination of the following is allowed. 587.Bl -tag -width "timestamp" -compact 588.It Cm offload 589Connection should be offloaded. 590Use 591.Cm !offload 592or 593.Cm not offload 594to disable offload instead. 595.It Cm coalesce 596Enable rx payload coalescing. 597Negate to disable. 598.It Cm timestamp 599Enable TCP timestamp option. 600Negate to disable. 601.It Cm sack 602Enable TCP Selective Acknowledgements (SACK). 603Negate to disable. 604.It Cm nagle 605Enable Nagle's algorithm. 606Negate to disable. 607.It Cm ecn 608Enable Explicit Congestion Notification (ECN). 609Negate to disable. 610.It Cm ddp 611Use Direct Data Placement (zero copy receive) and zero copy transmit on the 612connection to service AIO requests on the socket. 613Negate to disable. 614.It Cm tls 615Set ULP mode to ULP_MODE_TLS. 616.It Cm cong Ar algo 617Use the specified congestion control algorithm. 618.Ar algo 619must be one of 620.Cm reno Ns , Cm tahoe Ns , Cm newreno Ns , or Cm highspeed Ns . 621.It Cm class Ar sc 622Bind the connection to the specified tx scheduling class. 623Valid range is 0 to 14 (for T4) and 0 to 15 (T5 onwards). 624.It Cm rxq Ar qid 625Use the specified offload rx queue. 626.Ar qid 627should be between 0 and nofldrxq for the ifnet. 628.It Cm txq Ar qnum 629Use the specified offload tx queue. 630.Ar qid 631should be between 0 and nofldtxq for the ifnet. 632.It Cm bind Ar qnum 633Shorthand for 634.Cm rxq Ar qnum Cm txq Ar qnum Ns . 635Use only when nofldrxq is the same as nofldtxq. 636.It Cm mss Ar val 637Set the advertised TCP MSS in the SYN for this connection to 638.Ar val 639(in bytes). 640The hardware MTU table must already have an entry that is suitable for the MSS. 641.El 642.Pp 643.It Example of a COP. 644Note that hardware listener for port 22 will be IPv4 only because the rule 645before it will prevent any IPv6 servers other than the first two. Also note 646that outgoing connections to 192.168/16 are the only outgoing connections that 647will get offloaded. 648.Bd -literal 649[L] port 80 => offload 650[L] port 443 => offload 651[L] ip6 => !offload 652[L] port 22 => offload 653[P] dst port 80 => offload cong highspeed !sack !ecn 654[P] dst port 443 => offload tls 655[A] dst net 192.168/16 => offload 656[A] all => !offload 657[D] port 22 => offload !nagle 658.Ed 659.El 660.It Cm policy clear 661Remove the Connection Offload Policy (COP) if one is in use. 662.It Bro Cm reg | reg64 Brc Ar addr Ns Op Ar =val 663.It Cm regdump Op Ar register-block ... 664Display contents of device registers. 665One or more 666.Ar register-block 667can be specified to limit the registers displayed. 668The default is to display registers for all blocks. 669Registers with read side effects are not read during a 670.Cm regdump 671operation. 672.Ar register-block 673can be 674.Cm sge pci dbg mc ma edc0 edc1 cim tp ulp_rx ulp_tx pmrx pmtx mps cplsw 675.Cm smb i2c mi uart pmu sf pl le ncsi xgmac Ns . 676.It Cm sched-class config Op Ar param Ar value 677Configure optional feature capabilities for the TX scheduler. 678.Bl -ohang -offset indent 679.It Sy type Ar scheduler-type 680Use packet for the packet scheduler. 681.It Sy minmax Ar value 682A non-zero value will enable "minmax" mode; a zero value will disable "minmax" mode. 683.Pp 684NOTE: Many (most) of the parameters and constraints are adapter-specific 685- for instance the number of channels and classes which are available 686whether various modes are implemented, etc. 687Consult the adapter documentation for specific information on any limitations. 688.El 689.It Cm sched-class params Op Ar param Ar value 690Configure parameters for a scheduling class. 691.Bl -ohang -offset indent 692.It Sy type Ar scheduler-type 693Use packet for packet scheduler. 694.It Sy level Ar scheduler-hierarchy-level 695The "level" within the scheduling hierarchy which is being programed: 696.Pp 697.Bl -tag -width "cl-wrr" -compact -offset indent 698.It Sy cl-rl 699Class Rate Limiting. 700.Pp 701.It Sy cl-wrr 702Class Weighted Round Robin. 703.Pp 704.It Sy ch-rl 705Channel Rate Limiting. 706.El 707.It Sy mode Ar scheduler-mode 708The mode in which the scheduling class is going to operate: 709.Pp 710.Bl -tag -width "class" -compact -offset indent 711.It Sy class 712All of the "flows" bound to the scheduling class will be held to aggregate scheduling constraints. 713.Pp 714.It Sy flow 715Each of the "flows" bound to the scheduling class will be held to the scheduling constraints. 716.El 717.Pp 718E.g. if the scheduling class has a TX bandwidth of 10Mb/s, in 719.Cm class 720mode, all of the "flows" bound to the class would be limited to an 721aggregate bandwidth of 10Mb/s; but in 722.Cm flow 723mode, each of the "flows" bound to the scheduling class would be limited to 10Mb/s. 724.It Sy rate-unit Ar scheduler-rate-unit 725The units of the scheduler rate constraints: 726.Pp 727.Bl -tag -width "bits" -compact -offset indent 728.It Sy bits 729bit rate in Kb/s. 730.Pp 731.It Sy pkts 732packets/s. 733.El 734.It Sy rate-mode Ar scheduler-rate-mode 735The mode of the scheduler rate constraints: 736.Pp 737.Bl -tag -width "relative" -compact -offset indent 738.It Sy relative 739percent of port rate. 740.Pp 741.It Sy absolute 742Kb/s. 743.El 744.It Sy channel Ar scheduler-channel-index 745The scheduling channel to which the scheduling class will be bound. 746.It Sy class Ar scheduler-class-index 747The scheduling class being programmed. 748.It Sy min-rate Ar minimum-rate 749The minimum guaranteed rate to which a rate-limiting scheduling class hierarchy will have access. 750.It Sy max-rate Ar maximum-rate 751The maximum rate for a rate-limiting scheduling class hierarchy. 752.It Sy weight Ar round-robin-weight 753The weight to be used for a weighted-round-robin scheduling hierarchy. 754.It Sy pkt-size Ar average-packet-size 755The average packet size will be used to compute scheduler constraints for a rate-limited scheduler class hierarchy. 756.Pp 757NOTE: Many (most) of the parameters and constraints are adapter-specific - for instance the number of channels and classes which are available, 758whether various modes are implemented, etc. 759Consult the adapter documentation for specific information on any limitations. 760.El 761.It Cm sched-queue Ar port queue class 762Bind the indicated port's NIC TX 763.Ar queue 764to the specified TX Scheduler 765.Ar class. 766If the TX 767.Ar queue 768is 769.Cm all, * 770or any negative value, the binding will apply to 771all of the TX queues associated with the 772.Ar interface. 773If the class is 774.Cm unbind, clear 775or any negative value, the TX queue(s) will be unbound from 776any current TX Scheduler Class binding. 777.It Cm stdio 778Switch to interactive mode. 779.It Cm tcb Ar tid 780Display contents of the hardware TCB (TCP Control Block) for the 781connection identfied by 782.Ar tid Ns . 783.El 784.Sh FILES 785/sys/dev/cxgbe/t4_ioctl.h 786.Sh AUTHORS 787This manual page was written by 788.An Navdeep Parhar Aq np@FreeBSD.org . 789