1.\" 2.\" Copyright (c) 2010 The FreeBSD Foundation 3.\" All rights reserved. 4.\" 5.\" Portions of this documentation were written by Shteryana Sotirova Shopova 6.\" under sponsorship from the FreeBSD Foundation. 7.\" 8.\" Copyright (c) 2005-2007 The FreeBSD Project. 9.\" All rights reserved. 10.\" 11.\" Author: Shteryana Shopova <syrinx@FreeBSD.org> 12.\" 13.\" Redistribution and use in source and binary forms, with or without 14.\" modification, are permitted provided that the following conditions 15.\" are met: 16.\" 1. Redistributions of source code must retain the above copyright 17.\" notice, this list of conditions and the following disclaimer. 18.\" 2. Redistributions in binary form must reproduce the above copyright 19.\" notice, this list of conditions and the following disclaimer in the 20.\" documentation and/or other materials provided with the distribution. 21.\" 22.\" THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 23.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25.\" ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 26.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32.\" SUCH DAMAGE. 33.\" 34.\" $FreeBSD$ 35.\" 36.Dd January 10, 2012 37.Dt BSNMPGET 1 38.Os 39.Sh NAME 40.Nm bsnmpget , 41.Nm bsnmpwalk , 42.Nm bsnmpset 43.Nd "simple tools for querying SNMP agents" 44.Sh SYNOPSIS 45.Nm 46.Op Fl aDdehnK 47.Op Fl A Ar options 48.Op Fl b Ar buffersize 49.Op Fl C Ar options 50.Op Fl I Ar options 51.Op Fl i Ar filelist 52.Op Fl l Ar filename 53.Op Fl M Ar max-repetitions 54.Op Fl N Ar non-repeaters 55.Op Fl o Ar output 56.Op Fl P Ar options 57.Op Fl p Ar pdu 58.Op Fl r Ar retries 59.Op Fl s Ar [trans::][community@][server][:port] 60.Op Fl t Ar timeout 61.Op Fl U Ar options 62.Op Fl v Ar version 63.Op Ar OID ... 64.Pp 65.Nm bsnmpwalk 66.Op Fl dhnK 67.Op Fl A Ar options 68.Op Fl b Ar buffersize 69.Op Fl C Ar options 70.Op Fl I Ar options 71.Op Fl i Ar filelist 72.Op Fl l Ar filename 73.Op Fl o Ar output 74.Op Fl P Ar options 75.Op Fl r Ar retries 76.Op Fl s Ar [trans::][community@][server][:port] 77.Op Fl t Ar timeout 78.Op Fl U Ar options 79.Op Fl v Ar version 80.Op Ar OID ... 81.Pp 82.Nm bsnmpset 83.Op Fl adehnK 84.Op Fl A Ar options 85.Op Fl b Ar buffersize 86.Op Fl C Ar options 87.Op Fl I Ar options 88.Op Fl i Ar filelist 89.Op Fl l Ar filename 90.Op Fl o Ar output 91.Op Fl P Ar options 92.Op Fl r Ar retries 93.Op Fl s Ar [trans::][community@][server][:port] 94.Op Fl t Ar timeout 95.Op Fl U Ar options 96.Op Fl v Ar version 97.Ar OID Ns = Ar syntax Ns : Ns Ar value 98.Op Ar OID Ns = Ar syntax Ns : Ns Ar value ... 99.Sh DESCRIPTION 100.Nm , 101.Nm bsnmpwalk 102and 103.Nm bsnmpset 104are simple tools for retrieving management information from and setting 105management information to a Simple Network Management Protocol (SNMP) agent. 106.Pp 107Depending on the options 108.Nm bsnmpget 109constructs either a SNMP GetRequest, GetNextRequest 110or a GetBulkRequest packet, fills in the object identifiers (OIDs) of the 111objects whose values will be retrieved, waits for a response and prints it if 112received successfully. 113.Pp 114.Nm Bsnmpwalk 115queries an agent with ether SNMP GetNextRequest or GetBulkRequest packets, 116asking for values of OID instances that are a part of the object subtree 117rooted at the provided OIDs. 118.Pp 119.Nm Bsnmpset 120constructs a SNMP SetRequest packet, fills in the OIDs (object identifiers), 121syntaxes and values of the objects whose values are to be set and waits for a 122response from server. 123.Sh OPTIONS 124The options are as follows (not all apply to all three programs): 125.Bl -tag -width ".It Fl D Ar options" 126.It Fl A Ar options 127Authentication options to use with SNMPv3 PDUs 128.Bl -tag -width \& 129.It Cm proto=[md5|sha] 130The protocol to use when calculating the PDU message digest. 131.It Cm key=authkey 132A binary localized authentication key to use when calculating the PDU message 133digest. 134.El 135.Pp 136By default SNMPv3 PDUs are sent unauthenticated. 137.It Fl a 138Skip any sanity checks when adding OIDs to a Protocol Data Unit (PDU): 139ingore syntax/access type, allow adding of non-leaf objects for GetPdu and 140read-only objects to a SetPDU. 141.It Fl b Ar buffersize 142Tune the size of buffers used to send and receive packets. 143The default size is 10000 bytes which should be enough unless an agent sends 144a really large octetstring. 145The maximum allowed length is 65535 according to the Structure of Management 146Information (SMIv2). 147.It Fl C Ar options 148The context to query with SNMPv3 PDUs. 149.Bl -tag -width \& 150.It Cm context=name 151The context name. Default is "" (empty). 152.It Cm context-engine=engine-id 153The SNMP Engine ID of the context to query with SNMPv3 PDUs, represented as 154binary octet string. 155By default, this is set to the Engine ID of the SNMP agent. 156.El 157.It Fl D 158Perform SNMP USM Engine Discovery, rather than sending a request for the value 159of a specific object. 160.It Fl d 161Turn on debugging. 162This option will cause the packets sent and received to be dumped to the 163terminal. 164.It Fl e 165Retry on error. 166If an error is returned in the response PDU, resend the request removing the 167variable that caused the error until a valid response is received. 168This is only useful for a GetRequest- and a GetNextRequest-PDU. 169.It Fl h 170Print a short help text with default values for various options. 171.It Fl I Ar options 172Load each MIB description file from the given list to translate symbolic 173object names to their numerical representation and vice versa. 174Use the other options to obtain a non-default behaviour: 175.Bl -tag -width \& 176.It Cm cut=OID 177Specifies the initial OID that was cut by 178.Xr gensnmpdef 1 179when producing the MIB description file. 180The default value is .iso(1).org(3).dod(6) which is what should have been 181used for all the files installed under 182.Pa /usr/share/snmp/defs . 183Use this only if you generated your own files, providing a 184.Fl c 185option to 186.Xr gensnmpdef 1 . 187.It Cm path=filedir 188The directory where files in the list will be searched. 189The default is 190.Pa /usr/share/snmp/defs Ns . 191.It Cm file=filelist 192A comma separated list of files to which the two options above will apply. 193.El 194.Pp 195The file suboption has to come after the other suboptions so that their 196non-default values will be applied to the list of files. 197The order of the other suboptions before each file suboption can be random. 198Suboptions may be separated either by commas or by spaces. 199If using spaces make sure the entire option string is one argument, for 200example using quotes. 201.It Fl i Ar filelist 202List of MIB description files produced by 203.Xr gensnmpdef 1 204which 205.Nm bsnmpget , 206.Nm bsnmpwalk 207or 208.Nm bsnmpset 209will search to translate numerical OIDs to their symbolic object names. 210Multiple files can be provided either giving this option multiple times 211or a comma separated list of file names. 212If a filename begins with a letter the default directory, 213.Pa /usr/share/snmp/defs , 214will be searched. 215.It Fl K 216Calculate and display the localized authentication and privacy keys 217corresponding to a plain text password. 218The password is obtained via the environment. 219Additionally, if one or more OIDs are specified, the calculated 220keys are used when processing the SNMPv3 requests. 221.It Fl l Ar filename 222The path of the posix local (unix domain) socket if local 223transport is used. 224.It Fl M Ar max-repetitions 225The value for the max-repetitions field in a GetBulk PDU. 226Default is 10. 227.It Fl N Ar non-repeaters 228The value for the non-repeaters field in a GetBulk PDU. 229Default is 0. 230.It Fl n 231Only use numerical representations for input and output OIDs and do not 232try to resolve symbolic object names. 233Note that 234.Nm bsnmpget , 235.Nm bsnmpwalk 236and 237.Nm bsnmpset 238will print numerical OIDs anyway if the corresponding string representation 239is not found in the MIB description files. 240.It Fl o Ar [quiet|short|verbose] 241The format used to print the received response. 242Quiet only prints values, short (default) prints an abbreviated OID 243representation and the value. 244In addition to the short output verbose prints the type before the value. 245.It Fl P Ar options 246Privacy options to use with SNMPv3 PDUs 247.Bl -tag -width \& 248.It Cm proto=[aes|des] 249The protocol to use when encrypting/decrypting SNMPv3 PDU data. 250.It Cm key=privkey 251A binary localized privacy key to use when encrypting/decrypting SNMPv3 PDU data. 252.El 253.Pp 254By default plain text SNMPv3 PDUs are sent. 255.It Fl p Ar [get|getnext|getbulk] 256The PDU type to send by 257.Nm bsmpget 258and 259.Nm bsnmpwalk . 260Default is get 261for 262.Nm bsmpget 263and getnext for 264.Nm bsnmpwalk . 265Getbulk allows executing the so called SNMP "bulkwalks" allowing the values of 266multiple columns to be retrieved in a single PDU by 267.Nm bsnmpwalk . 268.It Fl r Ar retries 269Number of resends of request packets before giving up if the agent does 270not respond after the first try. 271Default is 3. 272.It Fl s Ar [trans::] Ns Ar [community@] Ns Ar [server] Ns Ar [:port] 273Each of the server specification components is optional but at least one 274has to be provided if the 275.Ar s 276option is used. 277The server specification is constructed in the following manner: 278.Bl -tag -width \& 279.It Cm trans:: 280Transport type may be one of udp, stream or dgram. 281If this option is not provided an UDP inet/inet6 socket will be used, which 282is the most common. 283Stream stands for a posix local stream socket and a posix local datagram 284socket will be used if dgram is specified. 285.It Cm community@ 286Specify an SNMP community string to be used when sending packets. 287If the option is skipped the default "public" will be used for 288.Nm 289and 290.Nm bsnmpwalk 291and the default "private" community string will be used for 292.Nm bsnmpset . 293.It Cm server 294This might be either the IP address or the hostname where the agent is 295listening. 296The default is 297.Qq localhost . 298.It Cm port 299The destination port to send the requests to. 300This is useful if the SNMP agent listens on a non-default port. 301Default is given by the 302.Qq snmp 303entry in 304.Pa /etc/services , 305port 161. 306.El 307.It Fl t Ar timeout 308Number of seconds before resending a request packet if the agent does 309not respond. 310The default value is 3 seconds. 311.It Fl U Ar options 312User credentials when sending SNMPv3 PDUs. 313.Bl -tag -width \& 314.It Cm engine=id 315The Engine ID of the SNMP agent represented as a binary octet string. 316.It Cm engine-boots=value 317The value of the snmpEngineBoots of the SNMP agent. 318.It Cm engine-time=value 319The value of the snmpEngineTime of the SNMP agent. 320.Pp 321If any of the above is not specified, SNMP USM Engine Discovery is attempted. 322This is also the default behavior. 323.It Cm name=username 324The USM user name to include in the SNMPv3 PDUs. 325By default, the user name is 326obtained via the environment. 327.El 328.It Fl v Ar version 329The SNMP protocol version to use when sending requests. 330SNMP versions 1, 2 and 3313 are supported. 332If no version option is provided 333.Nm bsnmpget , 334.Nm bsnmpwalk 335and 336.Nm bsnmpset 337will use version 2. 338Note that GetBulkRequest-PDUs were introduced in SNMPv2 thus setting the 339version to 1 is incompatible with sending a GetBulk PDU. 340.It OID 341The object identifier whose value to retrieve. 342At least one OID should be provided for 343.Nm bsnmpget 344to be able to send a request. 345.Pp 346For 347.Nm bsnmpwalk 348this is the root object identifier of the subtree whose values are to be 349retrieved. 350If no OID is provided 351.Nm bsnmpwalk 352will walk the mib2 subtree rooted 353at .iso(1).org(3).dod(6).internet(1).mgmt(2).mib2(1) . 354.Pp 355Any of the formats used to print a single variable 356is valid as input OID: 357.Bl -tag -width \& 358.It 1.3.6.1.2.1.25.1.1.0 359.It sysDescr 360.It ifPhysAddress.1 361.It ifRcvAddressStatus.2.6.255.255.255.255.255.255 362.It ifRcvAddressType[2,ff:ff:ff:ff:ff:ff] 363.It ifRcvAddressStatus[Integer:1,OctetString:ff:ff:ff:ff:ff:ff] 364(requires the 365.Fl o Ar verbose 366option) 367.El 368.Pp 369Square brackets are used to denote an entry's indexes. 370When used in an input OID, the square brackets may have to be 371escaped or the OID has to be quoted to protect it from the shell. 372Note there is no difference between ifName.1 and "ifName[1]". 373.It OID Ns = Ns Ar [syntax Ns :] Ns Ar value 374The object identifier with its syntax type and value that is to be set. 375At least one such string OID=[syntax:]value should be provided to 376.Nm bsnmpset 377to be able to send a request. 378.Bl -tag -width \& 379.It Cm OID 380OID may be input as a string, a string followed by a random number of integers 381(suboids) separated by dots, a sequence of integers separated by dots - that is 382if the 383.Ar n 384option is used - and in such case a syntax is required for every value, 385or a string followed by square brackets (used to denote an entry's indexes) and 386corresponding indexes. 387Any of the formats used to print a single variable by 388.Nm bsnmpset 389is valid as input OID as well: 390.Bl -tag -width \& 391.It 1.3.6.1.2.1.25.1.1.0=TimeTicks:537615486 392.It sysLocation=OctetString:"@ Home" (with Fl o Ar verbose No option) 393.It sysLocation.0="@ Home" 394.It 1.3.6.1.2.1.2.2.1.6.1=OctetString:ffffffffffff 395.It ifPhysAddress.1="00:02:b3:1d:1c:a3" 396.It ifRcvAddressStatus.1.6.255.255.255.255.255.255=1 397.It "ifRcvAddressStatus[Integer:1,OctetString:ff:ff:ff:ff:ff:ff]=Integer:1" 398(with the 399.Fl o Ar verbose 400option) 401.El 402.It Cm syntax 403where the syntax string is one of: 404Integer, OctetString, OID, IpAddress, Counter32, Gauge, TimeTicks, Counter64. 405.It Cm value 406The value to be set - IP address in form of u.u.u.u - for example 4071.3.1.6.1.2.0=IpAddress:192.168.0.1, strings require inverted-commas if they 408contain any special characters or spaces, all other numeric types do not. 409.El 410.El 411.Sh ENVIRONMENT 412.Nm , 413.Nm bsnmpwalk 414and 415.Nm bsnmpset 416use the following environment variables: 417.Bl -tag -width SNMPAUTH 418.It Ev SNMPAUTH 419Specifies a default SNMP USM authentication protocol. 420.It Ev SNMPPRIV 421Specifies a default SNMP USM privacy protocol. 422.It Ev SNMPUSER 423Specifies a default SNMP USM user name. 424.It Ev SNMPPASSWD 425Specifies the SNMP USM plain text password to use when calculating localized 426authentication and privacy keys. 427If this variable exists in the environment, 428SNMPv3 is the default version to use for outgoing requests. 429.El 430.Sh SEE ALSO 431.Xr gensnmpdef 1 432.Sh AUTHORS 433.An Shteryana Shopova Aq syrinx@FreeBSD.org 434