1if [ ! "$_DEVICE_SUBR" ]; then _DEVICE_SUBR=1 2# 3# Copyright (c) 2012-2014 Devin Teske 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26# 27# $FreeBSD$ 28# 29############################################################ INCLUDES 30 31BSDCFG_SHARE="/usr/share/bsdconfig" 32. $BSDCFG_SHARE/common.subr || exit 1 33f_dprintf "%s: loading includes..." device.subr 34f_include $BSDCFG_SHARE/dialog.subr 35f_include $BSDCFG_SHARE/geom.subr 36f_include $BSDCFG_SHARE/strings.subr 37f_include $BSDCFG_SHARE/struct.subr 38 39BSDCFG_LIBE="/usr/libexec/bsdconfig" 40f_include_lang $BSDCFG_LIBE/include/messages.subr 41 42############################################################ GLOBALS 43 44NDEVICES=0 # Set by f_device_register(), used by f_device_*() 45 46# 47# A "device" from legacy sysinstall's point of view (mostly) 48# 49# NB: Disk devices have their `private' property set to GEOM ident 50# NB: USB devices have their `private' property set to USB disk device name 51# 52f_struct_define DEVICE \ 53 capacity \ 54 desc \ 55 devname \ 56 enabled \ 57 flags \ 58 get \ 59 init \ 60 name \ 61 private \ 62 shutdown \ 63 type \ 64 volume 65 66# Network devices have their `private' property set to this 67f_struct_define DEVICE_INFO \ 68 extras \ 69 ipaddr \ 70 ipv6addr \ 71 netmask \ 72 use_dhcp \ 73 use_rtsol 74 75# 76# Device types for f_device_register(), f_device_find(), et al. 77# 78setvar DEVICE_TYPE_ANY "any" # Any 79setvar DEVICE_TYPE_NONE "NONE" # Unknown 80setvar DEVICE_TYPE_DISK "DISK" # GEOM `DISK' 81setvar DEVICE_TYPE_FLOPPY "FD" # GEOM `FD' 82setvar DEVICE_TYPE_FTP "FTP" # Dynamic network device 83setvar DEVICE_TYPE_NETWORK "NETWORK" # See f_device_get_all_network 84setvar DEVICE_TYPE_CDROM "CDROM" # GEOM `DISK' 85setvar DEVICE_TYPE_USB "USB" # GEOM `PART' 86setvar DEVICE_TYPE_DOS "DOS" # GEOM `DISK' `PART' or `LABEL' 87setvar DEVICE_TYPE_UFS "UFS" # GEOM `DISK' `PART' or `LABEL' 88setvar DEVICE_TYPE_NFS "NFS" # Dynamic network device 89setvar DEVICE_TYPE_HTTP_PROXY "HTTP_PROXY" # Dynamic network device 90setvar DEVICE_TYPE_HTTP "HTTP" # Dynamic network device 91 92# Network devices have the following flags available 93setvar IF_ETHERNET 1 94setvar IF_WIRELESS 2 95setvar IF_ACTIVE 4 96 97# 98# Default behavior is to call f_device_get_all() automatically when loaded. 99# 100: ${DEVICE_SELF_SCAN_ALL=1} 101 102# 103# Device Catalog variables 104# 105DEVICE_CATALOG_APPEND_ONLY= # Used by f_device_catalog_set() 106NCATALOG_DEVICES=0 # Used by f_device_catalog_*() and MAIN 107 108# 109# A ``catalog'' device is for mapping GEOM devices to media devices (for 110# example, determining if a $GEOM_CLASS_DISK geom is $DEVICE_TYPE_CDROM or 111# $DEVICE_TYPE_DISK) and also getting default descriptions for devices that 112# either lack a GEOM provided description or lack a presence in GEOM) 113# 114f_struct_define CATALOG_DEVICE \ 115 desc \ 116 name \ 117 type 118 119############################################################ FUNCTIONS 120 121# f_device_register $var_to_set $name $desc $devname $type $enabled 122# $init_function $get_function $shutdown_function 123# $private $capacity 124# 125# Register a device. A `structure' (see struct.subr) is created and if 126# $var_to_set is non-NULL, upon success holds the name of the struct created. 127# The remaining positional arguments correspond to the properties of the 128# `DEVICE' structure-type to be assigned (defined above). 129# 130# If not already registered (based on $name and $type), a new device is created 131# and $NDEVICES is incremented. 132# 133f_device_register() 134{ 135 local __var_to_set="$1" __name="$2" __desc="$3" __devname="$4" 136 local __type="$5" __enabled="$6" __init_func="$7" __get_func="$8" 137 local __shutdown_func="$9" __private="${10}" __capacity="${11}" 138 139 # Required parameter(s) 140 [ "$__name" ] || return $FAILURE 141 if [ "$__var_to_set" ]; then 142 setvar "$__var_to_set" "" || return $FAILURE 143 fi 144 145 local __device 146 if f_device_find -1 "$__name" "$__type" __device; then 147 f_struct_free "$__device" 148 f_struct_new DEVICE "$__device" || return $FAILURE 149 else 150 __device=device_$(( NDEVICES + 1 )) 151 f_struct_new DEVICE "$__device" || return $FAILURE 152 NDEVICES=$(( $NDEVICES + 1 )) 153 fi 154 $__device set name "$__name" 155 $__device set desc "$__desc" 156 $__device set devname "$__devname" 157 $__device set type "$__type" 158 $__device set enabled "$__enabled" 159 $__device set init "$__init_func" 160 $__device set get "$__get_func" 161 $__device set shutdown "$__shutdown_func" 162 $__device set private "$__private" 163 $__device set capacity "$__capacity" 164 165 [ "$__var_to_set" ] && setvar "$__var_to_set" "$__device" 166 return $SUCCESS 167} 168 169# f_device_reset 170# 171# Reset the registered device chain. 172# 173f_device_reset() 174{ 175 local n=1 176 while [ $n -le $NDEVICES ]; do 177 f_device_shutdown device_$n 178 179 # 180 # XXX This potentially leaks $dev->private if it's being 181 # used to point to something dynamic, but you're not supposed 182 # to call this routine at such times that some open instance 183 # has its private member pointing somewhere anyway. 184 # 185 f_struct_free device_$n 186 187 n=$(( $n + 1 )) 188 done 189 NDEVICES=0 190} 191 192# f_device_reset_network 193# 194# Reset the registered network device chain. 195# 196f_device_reset_network() 197{ 198 local n=1 device type private i 199 while [ $n -le $NDEVICES ]; do 200 device=device_$n 201 f_struct $device || continue 202 $device get type type 203 [ "$type" = "$DEVICE_TYPE_NETWORK" ] || continue 204 205 # 206 # Leave the device up (don't call shutdown routine) 207 # 208 209 # Network devices may have DEVICE_INFO private member 210 $device get private private 211 [ "$private" ] && f_struct_free "$private" 212 213 # Free the network device 214 f_struct_free $device 215 216 # Fill the gap we just created 217 i=$n 218 while [ $i -lt $NDEVICES ]; do 219 f_struct_copy device_$(( $i + 1 )) device_$i 220 done 221 f_struct_free device_$NDEVICES 222 223 # Finally decrement the number of devices 224 NDEVICES=$(( $NDEVICES - 1 )) 225 226 n=$(( $n + 1 )) 227 done 228} 229 230# f_device_get_all 231# 232# Get all device information for all devices. 233# 234f_device_get_all() 235{ 236 local devname type desc capacity 237 238 f_dprintf "f_device_get_all: Probing devices..." 239 f_dialog_info "$msg_probing_devices_please_wait_this_can_take_a_while" 240 241 # First go for the network interfaces 242 f_device_get_all_network 243 244 # Next, go for the GEOM devices we might want to use as media 245 local geom geoms geom_name 246 debug= f_geom_find "" $GEOM_CLASS_DEV geoms 247 for geom in $geoms; do 248 if ! f_device_probe_geom $geom; then 249 debug= $geom get name geom_name 250 f_dprintf "WARNING! Unable to classify %s as %s" \ 251 "GEOM device $geom_name" "media source" 252 fi 253 done 254} 255 256# f_device_get_all_network 257# 258# Get all network device information for attached network devices. 259# 260f_device_get_all_network() 261{ 262 local devname desc device flags 263 for devname in $( ifconfig -l ); do 264 # Eliminate network devices that don't make sense 265 case "$devname" in 266 lo*) continue ;; 267 esac 268 269 # Try and find its description 270 f_device_desc "$devname" $DEVICE_TYPE_NETWORK desc 271 272 f_dprintf "Found network device named %s" "$devname" 273 debug= f_device_register device $devname "$desc" \ 274 "$devname" $DEVICE_TYPE_NETWORK 1 \ 275 f_media_init_network "" f_media_shutdown_network "" -1 276 277 # Set flags based on media and status 278 flags=0 279 eval "$( ifconfig $devname 2> /dev/null | awk -v var=flags ' 280 function _or(var, mask) { 281 printf "%s=$(( $%s | $%s ))\n", var, var, mask 282 } 283 BEGIN { S = "[[:space:]]+" } 284 { 285 if (!match($0, "^" S "(media|status):" S)) next 286 value = substr($0, RLENGTH + 1) 287 if ($1 == "media:") { 288 if (value ~ /Ethernet/) _or(var, "IF_ETHERNET") 289 if (value ~ /802\.11/) _or(var, "IF_WIRELESS") 290 } else if ($1 == "status:") { 291 if (value ~ /^active/) _or(var, "IF_ACTIVE") 292 } 293 }' )" 294 $device set flags $flags 295 done 296} 297 298# f_device_rescan 299# 300# Rescan all devices, after closing previous set - convenience function. 301# 302f_device_rescan() 303{ 304 f_device_reset 305 f_geom_rescan 306 f_device_get_all 307} 308 309# f_device_rescan_network 310# 311# Rescan all network devices, after closing previous set - for convenience. 312# 313f_device_rescan_network() 314{ 315 f_device_reset_network 316 f_device_get_all_network 317} 318 319# f_device_probe_geom $geom 320# 321# Probe a single GEOM device and if it can be classified as a media source, 322# register it using f_device_register() with known type-specific arguments. 323# 324f_device_probe_geom() 325{ 326 local geom="$1" 327 328 f_struct "$geom" || return $FAILURE 329 330 # geom associated variables 331 local geom_name geom_consumer provider_ref geom_provider= 332 local provider_geom provider_config provider_class= 333 local provider_config_type catalog_struct catalog_type 334 local disk_ident 335 336 # gnop(8)/geli(8) associated variables (p for `parent device') 337 local p_devname p_geom p_consumer p_provider_ref p_provider 338 local p_provider_config p_provider_geom p_provider_class 339 340 # md(4) associated variables 341 local config config_type config_file magic= 342 343 # Temporarily disable debugging to keep debug output light 344 local old_debug="$debug" debug= 345 346 # 347 # Get the GEOM name (for use below in device registration) 348 # 349 $geom get name devname || continue 350 351 # 352 # Attempt to get the consumer, provider, provider config, and 353 # provider class for this geom (errors ignored). 354 # 355 # NB: Each GEOM in the `DEV' class should have one consumer. 356 # That consumer should have a reference to its provider. 357 # 358 $geom get consumer1 geom_consumer 359 f_struct "$geom_consumer" get provider_ref provider_ref && 360 f_geom_find_by id "$provider_ref" provider geom_provider 361 if f_struct "$geom_provider"; then 362 $geom_provider get config provider_config 363 f_geom_parent $geom_provider provider_geom && 364 f_geom_parent $provider_geom provider_class 365 fi 366 367 # 368 # Get values for device registration (errors ignored) 369 # 370 f_struct "$provider_class" get name type 371 f_struct "$geom_provider" get mediasize capacity 372 f_struct "$provider_config" get descr desc 373 374 # 375 # For gnop(8), geli(8), or combination thereof, change device type to 376 # that of the consumer 377 # 378 p_devname= p_geom= p_provider= p_provider_config= 379 case "$devname" in 380 *.nop.eli) p_devname="${devname%.nop.eli}" ;; 381 *.eli.nop) p_devname="${devname%.eli.nop}" ;; 382 *.eli) p_devname="${devname%.eli}" ;; 383 *.nop) p_devname="${devname%.nop}" ;; 384 esac 385 [ "$p_devname" ] && f_geom_find "$p_devname" $GEOM_CLASS_DEV p_geom 386 if [ "${p_geom:-$geom}" != "$geom" ]; then 387 f_struct "$p_geom" get consumer1 p_consumer 388 f_struct "$p_consumer" get provider_ref p_provider_ref && 389 f_geom_find_by id "$p_provider_ref" provider p_provider 390 if f_struct "$p_provider"; then 391 $p_provider get config p_provider_config 392 f_geom_parent $p_provider p_provider_geom && 393 f_geom_parent $p_provider_geom p_provider_class 394 fi 395 f_struct "$p_provider_class" get name type 396 fi 397 398 # Look up geom device in device catalog for default description 399 f_device_catalog_get \ 400 $DEVICE_TYPE_ANY "${p_devname:-$devname}" catalog_struct 401 [ "$desc" ] || f_struct "catalog_device_$catalog_struct" get desc desc 402 403 # Use device catalog entry for potential re-classification(s) 404 f_struct "catalog_device_$catalog_struct" get type catalog_type 405 406 # Restore debugging for this next part (device registration) 407 debug="$old_debug" 408 409 # 410 # Register the device 411 # 412 local retval device 413 case "$type" in 414 $GEOM_CLASS_DISK) 415 # First attempt to classify by device catalog (see MAIN) 416 case "$catalog_type" in 417 $DEVICE_TYPE_CDROM) 418 f_dprintf "Found CDROM device for disk %s" "$devname" 419 debug= f_device_register device "$devname" "$desc" \ 420 "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ 421 f_media_init_cdrom f_media_get_cdrom \ 422 f_media_shutdown_cdrom "" "$capacity" && 423 return $SUCCESS 424 ;; 425 esac 426 427 # Fall back to register label device as a disk and taste it 428 f_dprintf "Found disk device named %s" "$devname" 429 debug= f_struct "$p_provider_config" get \ 430 ident disk_ident || 431 debug= f_struct "$provider_config" get \ 432 ident disk_ident 433 debug= f_device_register device "$devname" "$desc" \ 434 "/dev/$devname" $DEVICE_TYPE_DISK 1 \ 435 "" "" "" "$disk_ident" "$capacity" 436 retval=$? 437 438 # Detect ``dangerously dedicated'' filesystems (errors ignored) 439 f_device_probe_disk_fs device "$devname" "$capacity" && 440 retval=$SUCCESS 441 442 return $retval 443 ;; 444 $GEOM_CLASS_FD) 445 f_dprintf "Found floppy device named %s" "$devname" 446 debug= f_device_register device "$devname" "$desc" \ 447 "/dev/$devname" $DEVICE_TYPE_FLOPPY 1 \ 448 f_media_init_floppy f_media_get_floppy \ 449 f_media_shutdown_floppy "" "$capacity" 450 return $? 451 ;; 452 $GEOM_CLASS_LABEL) 453 : fall through to below section # reduces indentation level 454 ;; 455 $GEOM_CLASS_MD) 456 f_dprintf "Found disk device named %s" "$devname" 457 debug= f_device_register device "$devname" "$desc" \ 458 "/dev/$devname" $DEVICE_TYPE_DISK 1 \ 459 "" "" "" "" "$capacity" 460 retval=$? 461 462 # 463 # Attempt to get file(1) magic to potentially classify as 464 # alternate media type. If unable to get magic, fall back to 465 # md(4) characteristics (such as vnode filename). 466 # 467 [ -r "/dev/$devname" ] && 468 magic=$( file -bs "/dev/$devname" 2> /dev/null ) 469 if [ ! "$magic" ]; then 470 # Fall back to md(4) characteristics 471 if f_struct "$p_provider_config"; then 472 config="$p_provider_config" 473 else 474 config="$provider_config" 475 fi 476 debug= f_struct "$config" get type config_type 477 debug= f_struct "$config" get file config_file 478 479 # Substitute magic for below based on type and file 480 case "$config_type=$config_file" in 481 vnode=*.iso) magic="ISO 9660" ;; 482 esac 483 fi 484 f_device_probe_disk_fs device \ 485 "$devname" "$capacity" "$magic" && 486 retval=$SUCCESS # Errors ignored 487 488 return $retval 489 ;; 490 $GEOM_CLASS_PART) 491 if f_struct "$p_provider_config"; then 492 config="$p_provider_config" 493 else 494 config="$provider_config" 495 fi 496 debug= f_struct "$config" get type provider_config_type 497 f_device_probe_geom_part device \ 498 "$provider_config_type" "$devname" "$capacity" 499 retval=$? 500 device_type=$DEVICE_TYPE_NONE 501 [ $retval -eq $SUCCESS ] && 502 debug= f_struct "$device" get type device_type 503 504 # Potentially re-classify as USB device 505 if [ "$device_type" = "$DEVICE_TYPE_UFS" -a \ 506 "$catalog_type" = "$DEVICE_TYPE_USB" ] 507 then 508 f_dprintf "Found USB device for partition %s" \ 509 "$devname" 510 debug= f_struct "$p_provider_geom" get \ 511 name disk_name || 512 debug= f_struct "$provider_geom" get \ 513 name disk_name 514 debug= f_device_register device "$devname" "$desc" \ 515 "/dev/$devname" $DEVICE_TYPE_USB 1 \ 516 f_media_init_usb f_media_get_usb \ 517 f_media_shutdown_usb "$disk_name" "$capacity" 518 retval=$? 519 fi 520 521 return $retval 522 ;; 523 $GEOM_CLASS_RAID) 524 # Use the provider geom name as the description 525 if [ ! "$desc" ]; then 526 f_struct "$p_provider_geom" get name desc || 527 f_struct "$provider_geom" get name desc 528 fi 529 530 f_dprintf "Found disk device named %s" "$devname" 531 debug= f_device_register device \ 532 "$devname" "${desc:-GEOM RAID device}" \ 533 "/dev/$devname" $DEVICE_TYPE_DISK 1 \ 534 "" "" "" "" "$capacity" 535 retval=$? 536 537 # Detect ``dangerously dedicated'' filesystems 538 f_device_probe_disk_fs device "$devname" "$capacity" && 539 retval=$SUCCESS # Errors ignored 540 541 return $retval 542 ;; 543 $GEOM_CLASS_ZFS_ZVOL) 544 f_dprintf "Found disk device named %s" "$devname" 545 debug= f_device_register device \ 546 "$devname" "${desc:-GEOM ZFS::ZVOL device}" \ 547 "/dev/$devname" $DEVICE_TYPE_DISK 1 \ 548 "" "" "" "" "$capacity" 549 retval=$? 550 551 # Detect ``dangerously dedicated'' filesystems 552 f_device_probe_disk_fs device "$devname" "$capacity" && 553 retval=$SUCCESS # Errors ignored 554 555 return $retval 556 ;; 557 *) 558 return $FAILURE # Unknown GEOM class 559 esac 560 561 # 562 # Still here? Must be $GEOM_CLASS_LABEL 563 # 564 565 local label_geom label_devname label_devgeom= label_devconsumer 566 local label_devprovider= label_devprovider_ref label_devprovider_config 567 local label_gpart_type 568 569 if f_struct "$p_provider"; then 570 label_geom="$p_provider_geom" 571 else 572 label_geom="$provider_geom" 573 fi 574 575 case "$devname" in 576 gpt/*|gptid/*) 577 # 578 # Attempt to get the partition type by getting the `config' 579 # member of the provider for our device (which is named in the 580 # parent geom of our current provider). 581 # 582 debug= f_struct "$label_geom" get name label_devname && 583 debug= f_geom_find "$label_devname" $GEOM_CLASS_DEV \ 584 label_devgeom 585 debug= f_struct "$label_devgeom" get \ 586 consumer1 label_devconsumer 587 debug= f_struct "$label_devconsumer" get \ 588 provider_ref label_devprovider_ref && 589 debug= f_geom_find_by id "$label_devprovider_ref" \ 590 provider label_devprovider 591 debug= f_struct "$label_devprovider" get \ 592 config label_devprovider_config 593 debug= f_struct "$label_devprovider_config" get \ 594 type label_gpart_type 595 596 # 597 # Register device label based on partition type 598 # 599 f_device_probe_geom_part device \ 600 "$label_gpart_type" "$devname" "$capacity" 601 return $? 602 ;; 603 iso9660/*) 604 f_dprintf "Found CDROM device labeled %s" "$devname" 605 debug= f_device_register device \ 606 "$devname" "ISO9660 file system" \ 607 "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ 608 f_media_init_cdrom f_media_get_cdrom \ 609 f_media_shutdown_cdrom "" "$capacity" 610 return $? 611 ;; 612 label/*) 613 # For generic labels, use provider geom name as real device 614 debug= f_struct "$label_geom" get name label_devname 615 616 # Look up label geom device in device catalog for default desc 617 debug= f_device_catalog_get \ 618 $DEVICE_TYPE_ANY "$label_devname" catalog_struct 619 [ "$desc" ] || debug= f_struct \ 620 "catalog_device_$catalog_struct" get desc desc 621 622 # Use device catalog entry for potential re-classification(s) 623 debug= f_struct "catalog_device_$catalog_struct" get \ 624 type catalog_type 625 626 # First attempt to classify by device catalog (see MAIN) 627 case "$catalog_type" in 628 $DEVICE_TYPE_CDROM) 629 f_dprintf "Found CDROM device for disk %s" "$devname" 630 debug= f_device_register device "$devname" "$desc" \ 631 "/dev/$devname" $DEVICE_TYPE_CDROM 1 \ 632 f_media_init_cdrom f_media_get_cdrom \ 633 f_media_shutdown_cdrom "" "$capacity" && 634 return $SUCCESS 635 ;; 636 esac 637 638 # Fall back to register label device as a disk and taste it 639 f_dprintf "Found disk device labeled %s" "$devname" 640 debug= f_device_register device \ 641 "$devname" "GEOM LABEL device" \ 642 "/dev/$devname" $DEVICE_TYPE_DISK 1 \ 643 "" "" "" "" "$capacity" 644 retval=$? 645 646 # Detect ``dangerously dedicated'' filesystems (errors ignored) 647 f_device_probe_disk_fs device "$devname" "$capacity" && 648 retval=$SUCCESS 649 650 return $retval 651 ;; 652 msdosfs/*) 653 f_dprintf "Found DOS partition labeled %s" "$devname" 654 debug= f_device_register device "$devname" "DOS file system" \ 655 "/dev/$devname" $DEVICE_TYPE_DOS 1 \ 656 f_media_init_dos f_media_get_dos \ 657 f_media_shutdown_dos "" "$capacity" 658 return $? 659 ;; 660 ufs/*|ufsid/*) 661 f_dprintf "Found UFS partition labeled %s" "$devname" 662 debug= f_device_register device "$devname" "UFS file system" \ 663 "/dev/$devname" $DEVICE_TYPE_UFS 1 \ 664 f_media_init_ufs f_media_get_ufs \ 665 f_media_shutdown_ufs "" "$capacity" 666 return $? 667 ;; 668 ext2fs/*|ntfs/*|reiserfs/*) 669 return $FAILURE # No media device handlers for these labels 670 ;; 671 esac 672 673 # Unable to classify GEOM label 674 return $FAILURE 675} 676 677# f_device_probe_geom_part $var_to_set $gpart_type $devname $capacity [$magic] 678# 679# Given a gpart(8) partition type and a device name, register the device if it 680# is a known partition type that we can handle. If $var_to_set is non-NULL, 681# upon success holds the DEVICE struct name of the registered device. 682# 683# Returns success if the device was successfully registered, failure otherwise. 684# 685f_device_probe_geom_part() 686{ 687 local __var_to_set="$1" __gpart_type="$2" __devname="$3" 688 local __capacity="${4:--1}" __magic="$5" 689 690 # 691 # Register device based on partition type 692 # NB: !0 equates to `unused' bsdlabel 693 # 694 case "$__gpart_type" in 695 fat16|fat32) 696 f_dprintf "Found DOS partition named %s" "$__devname" 697 debug= f_device_register "$__var_to_set" \ 698 "$__devname" "DOS file system" \ 699 "/dev/$__devname" $DEVICE_TYPE_DOS 1 \ 700 f_media_init_dos f_media_get_dos \ 701 f_media_shutdown_dos "" "$__capacity" 702 return $? 703 ;; 704 freebsd|!0) # Commonly used inappropriately, taste for FreeBSD 705 [ -r "/dev/$__devname" -a ! "$__magic" ] && 706 __magic=$( file -bs "/dev/$__devname" 2> /dev/null ) 707 case "$__magic" in 708 *"Unix Fast File system"*) 709 f_dprintf "Found UFS partition named %s" "$__devname" 710 debug= f_device_register "$__var_to_set" \ 711 "$__devname" "UFS file system" \ 712 "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ 713 f_media_init_ufs f_media_get_ufs \ 714 f_media_shutdown_ufs "" "$__capacity" 715 return $? 716 esac 717 return $FAILURE 718 ;; 719 freebsd-ufs) 720 f_dprintf "Found UFS partition named %s" "$__devname" 721 debug= f_device_register "$__var_to_set" \ 722 "$__devname" "UFS file system" \ 723 "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ 724 f_media_init_ufs f_media_get_ufs \ 725 f_media_shutdown_ufs "" "$__capacity" 726 return $? 727 ;; 728 apple-*|linux-*|ms-*|netbsd-*|ntfs|vmware-*) 729 return $FAILURE # No device types for these 730 ;; 731 bios-*|ebr|efi|mbr|freebsd-boot|freebsd-swap) 732 return $FAILURE # Not a source for media 733 ;; 734 freebsd-nandfs|freebsd-vinum|freebsd-zfs) 735 return $FAILURE # Unsupported as media source 736 ;; 737 esac 738 739 return $FAILURE # Unknown partition type 740} 741 742# f_device_probe_disk_fs $var_to_set $devname [$capacity [$magic]] 743# 744# Given a device name, taste it and register the device if it is a so-called 745# ``dangerously dedicated'' file system written without a partition table. 746# Tasting is done using file(1) (specifically `file -bs') but if $magic is 747# present and non-NULL it is used instead. If $var_to_set is non-NULL, upon 748# success holds the DEVICE struct name of the registered device. 749# 750# Returns success if the device was successfully registered, failure otherwise. 751# 752f_device_probe_disk_fs() 753{ 754 local __var_to_set="$1" __devname="$2" __capacity="${3:--1}" 755 local __magic="$4" 756 757 [ -r "/dev/${__devname#/dev/}" -a ! "$__magic" ] && 758 __magic=$( file -bs "/dev/$__devname" 2> /dev/null ) 759 760 case "$__magic" in 761 *"ISO 9660"*) 762 f_dprintf "Found CDROM device for disk %s" "$__devname" 763 debug= f_device_register "$__var_to_set" \ 764 "$__devname" "ISO9660 file system" \ 765 "/dev/$__devname" $DEVICE_TYPE_CDROM 1 \ 766 f_media_init_cdrom f_media_get_cdrom \ 767 f_media_shutdown_cdrom "" "$__capacity" 768 return $? 769 ;; 770 *"Unix Fast File system"*) 771 f_dprintf "Found UFS device for disk %s" "$__devname" 772 debug= f_device_register "$__var_to_set" \ 773 "$__devname" "UFS file system" \ 774 "/dev/$__devname" $DEVICE_TYPE_UFS 1 \ 775 f_media_init_ufs f_media_get_ufs \ 776 f_media_shutdown_ufs "" "$__capacity" 777 return $? 778 ;; 779 *"FAT (12 bit)"*|*"FAT (16 bit)"*|*"FAT (32 bit)"*) 780 f_dprintf "Found DOS device for disk %s" "$__devname" 781 debug= f_device_register "$__var_to_set" \ 782 "$__devname" "DOS file system" \ 783 "/dev/$__devname" $DEVICE_TYPE_DOS 1 \ 784 f_media_init_dos f_media_get_dos \ 785 f_media_shutdown_dos "" "$__capacity" 786 return $? 787 ;; 788 esac 789 790 return $FAILURE # Unknown file system type 791} 792 793# f_device_catalog_get $type $name [$var_to_set] 794# 795# Fetch the struct name of the catalog device matching device $name. If $type 796# is either NULL, missing, or set to $DEVICE_TYPE_ANY then only $name is used. 797# Returns success if a match was found, otherwise failure. 798# 799# If $var_to_set is missing or NULL, the struct name is printed to standard out 800# for capturing in a sub-shell (which is less-recommended because of 801# performance degredation; for example, when called in a loop). 802# 803f_device_catalog_get() 804{ 805 local __type="$1" __name="$2" __var_to_set="$3" 806 local __dname= 807 808 # Return failure if no $name 809 [ "$__name" ] || return $FAILURE 810 811 # Disable debugging to keep debug output light 812 local debug= 813 814 # 815 # Attempt to create an alternate-form of $__name that contains the 816 # first contiguous string of numbers replaced with `%d' for comparison 817 # against stored pattern names (see MAIN). 818 # 819 local __left="${__name%%[0-9]*}" __right="${__name#*[0-9]}" 820 if [ "$__left" != "$__name" ]; then 821 # Chop leading digits from right 'til we hit first non-digit 822 while :; do 823 case "$__right" in 824 [0-9]*) __right="${__right#[0-9]}" ;; 825 *) break 826 esac 827 done 828 __dname="${__left}%d$__right" 829 fi 830 831 [ "$__type" = "$DEVICE_TYPE_ANY" ] && __type= 832 local __dev __dev_name __dev_type 833 for __dev in $DEVICE_CATALOG; do 834 catalog_device_$__dev get name __dev_name 835 [ "$__dev_name" = "$__name" -o "$__dev_name" = "$__dname" ] || 836 continue 837 catalog_device_$__dev get type __dev_type 838 [ "${__type:-$__dev_type}" = "$__dev_type" ] || continue 839 if [ "$__var_to_set" ]; then 840 setvar "$__var_to_set" $__dev 841 else 842 echo $__dev 843 fi 844 return $? 845 done 846 847 [ "$__var_to_set" ] && setvar "$__var_to_set" "" 848 return $FAILURE 849} 850 851# f_device_catalog_set $type $name $desc 852# 853# Store a description (desc) in-association with device $type and $name. 854# Returns success unless $name is NULL or missing. Use f_device_catalog_get() 855# routine with the same $name and optionally $type to retrieve catalog device 856# structure (see CATALOG_DEVICE struct definition in GLOBALS section). 857# 858f_device_catalog_set() 859{ 860 local type="$1" name="$2" desc="$3" 861 local struct dev dev_type found= 862 863 [ "$name" ] || return $FAILURE 864 865 # Disable debugging to keep debug output light 866 local debug= 867 868 f_str2varname "$name" struct 869 if [ ! "$DEVICE_CATALOG_APPEND_ONLY" ]; then 870 for dev in $DEVICE_CATALOG; do 871 [ "$dev" = "$struct" ] || continue 872 found=1 break 873 done 874 fi 875 if [ "$found" ]; then 876 f_struct_free "catalog_device_$struct" 877 else 878 DEVICE_CATALOG="$DEVICE_CATALOG $struct" 879 fi 880 f_struct_new CATALOG_DEVICE "catalog_device_$struct" || return $FAILURE 881 catalog_device_$struct set type "$type" 882 catalog_device_$struct set name "$name" 883 catalog_device_$struct set desc "$desc" 884 return $SUCCESS 885} 886 887# f_device_desc $device_name $device_type [$var_to_set] 888# 889# Print a description for a device name (eg., `fxp0') given a specific device 890# type/class. 891# 892# If $var_to_set is missing or NULL, the device description is printed to 893# standard out for capturing in a sub-shell (which is less-recommended because 894# of performance degredation; for example, when called in a loop). 895# 896f_device_desc() 897{ 898 local __name="$1" __type="$2" __var_to_set="$3" 899 local __devname __devunit __cp 900 901 # Check variables 902 [ "$__name" ] || return $SUCCESS 903 [ "$__type" = "$DEVICE_TYPE_ANY" ] && type= 904 [ "$__var_to_set" ] && { setvar "$__var_to_set" "" || return; } 905 906 # 907 # Return sysctl MIB dev.NAME.UNIT.%desc if it exists, otherwise fall 908 # through to further alternate methods. 909 # 910 if f_have sysctl; then 911 __devname="${__name%%[0-9]*}" 912 __devunit="${__name#$__devname}" 913 __devunit="${__devunit%%[!0-9]*}" 914 if [ "$__var_to_set" ]; then 915 if __cp=$( 916 sysctl -n "dev.$__devname.$__devunit.%desc" \ 917 2> /dev/null 918 ); then 919 setvar "$__var_to_set" "$__cp" && 920 return $SUCCESS 921 fi 922 else 923 sysctl -n "dev.$__devname.$__devunit.%desc" \ 924 2> /dev/null && return $SUCCESS 925 fi 926 fi 927 928 # Look up device in catalog for default description 929 local __catalog_struct 930 debug= f_device_catalog_get "$__type" "$__name" __catalog_struct 931 debug= f_struct "catalog_device_$__catalog_struct" get \ 932 desc "$__var_to_set" && return $SUCCESS 933 934 # 935 # Sensible fall-backs for specific types 936 # 937 case "$__type" in 938 $DEVICE_TYPE_CDROM) __cp="<unknown cdrom device type>" ;; 939 $DEVICE_TYPE_DISK) __cp="<unknown disk device type>" ;; 940 $DEVICE_TYPE_FLOPPY) __cp="<unknown floppy device type>" ;; 941 $DEVICE_TYPE_USB) __cp="<unknown USB storage device type>" ;; 942 $DEVICE_TYPE_NETWORK) __cp="<unknown network interface type>" ;; 943 *) 944 __cp="<unknown device type>" 945 esac 946 947 if [ "$__var_to_set" ]; then 948 setvar "$__var_to_set" "$__cp" 949 else 950 echo "$__cp" 951 fi 952 953 return $FAILURE 954} 955 956# f_device_is_ethernet $device 957# 958# Returns true if $device is a wired Ethernet network interface. Otherwise 959# returns false. Example wired interfaces include: fxp0 em0 bge0 rl0 etc. 960# 961f_device_is_ethernet() 962{ 963 local dev="$1" type flags 964 965 # Make sure we have an actual device by that name 966 f_struct "$dev" || return $FAILURE 967 968 # Make sure that the device is a network device 969 $dev get type type 970 [ "$type" = "$DEVICE_TYPE_NETWORK" ] || return $FAILURE 971 972 # Make sure that the media flags indicate that it is Ethernet 973 $dev get flags flags 974 [ $(( ${flags:-0} & $IF_ETHERNET )) -eq $IF_ETHERNET ] 975} 976 977# f_device_is_wireless $device 978# 979# Returns true if $device is a Wireless network interface. Otherwise returns 980# false. Examples of wireless interfaces include: iwn0 981# 982f_device_is_wireless() 983{ 984 local dev="$1" type flags 985 986 # Make sure we have an actual device by that name 987 f_struct "$dev" || return $FAILURE 988 989 # Make sure that the device is a network device 990 $dev get type type 991 [ "$type" = "$DEVICE_TYPE_NETWORK" ] || return $FAILURE 992 993 # Make sure that the media flags indicate that it is 802.11 wireless 994 $dev get flags flags 995 [ $(( ${flags:-0} & $IF_WIRELESS )) -eq $IF_WIRELESS ] 996} 997 998# f_device_is_active $device 999# 1000# Returns true if $device is active. Otherwise returns false. Currently this 1001# only works for network interfaces. 1002# 1003f_device_is_active() 1004{ 1005 local dev="$1" type flags=0 1006 1007 # Make sure we have an actual device by that name 1008 f_struct "$dev" || return $FAILURE 1009 1010 $dev get type type 1011 case "$type" in 1012 $DEVICE_TYPE_NETWORK) 1013 # Make sure that the media flags indicate that it is active 1014 $dev get flags flags 1015 [ $(( ${flags:-0} & $IF_ACTIVE )) -eq $IF_ACTIVE ] 1016 ;; 1017 *) 1018 return $FAILURE 1019 esac 1020} 1021 1022# f_device_find [-1] $name [$type [$var_to_set]] 1023# 1024# Find one or more registered devices by name, type, or both. Returns a space- 1025# separated list of devices matching the search criterion. 1026# 1027# If `-1' option flag is given, only the first matching device is returned. 1028# 1029# If $var_to_set is missing or NULL, the device name(s) are printed to standard 1030# out for capturing in a sub-shell (which is less-recommended because of 1031# performance degredation; for example, when called in a loop). 1032# 1033f_device_find() 1034{ 1035 local OPTIND OPTARG flag only_one= 1036 while getopts 1 flag; do 1037 case "$flag" in 1038 1) only_one=1 ;; 1039 esac 1040 done 1041 shift $(( $OPTIND - 1 )) 1042 1043 local __name="$1" __type="${2:-$DEVICE_TYPE_ANY}" __var_to_set="$3" 1044 local __n=1 __devname __devtype __found= 1045 while [ $__n -le $NDEVICES ]; do 1046 device_$__n get name __devname 1047 device_$__n get type __devtype 1048 if [ "$__name" = "$__devname" -o ! "$__name" ] && 1049 [ "$__type" = "$DEVICE_TYPE_ANY" -o \ 1050 "$__type" = "$__devtype" ] 1051 then 1052 __found="$__found device_$__n" 1053 [ "$only_one" ] && break 1054 fi 1055 __n=$(( $__n + 1 )) 1056 done 1057 1058 if [ "$__var_to_set" ]; then 1059 setvar "$__var_to_set" "${__found# }" 1060 else 1061 echo $__found 1062 fi 1063 [ "$__found" ] # Return status 1064} 1065 1066# f_device_init $device 1067# 1068# Initialize a device by evaluating its `init' function. The $device argument 1069# is a DEVICE struct name. 1070# 1071f_device_init() 1072{ 1073 local device="$1" init_func 1074 f_struct "$device" || return $? 1075 $device get init init_func 1076 ${init_func:-:} "$device" 1077} 1078 1079# f_device_get $device $file [$probe] 1080# 1081# Read $file by evaluating the device's `get' function. The file is commonly 1082# produced on standard output (but it truly depends on the function called). 1083# The $device argument is a DEVICE struct name. 1084# 1085f_device_get() 1086{ 1087 local device="$1" file="$2" probe="$3" get_func 1088 f_struct "$device" || return $? 1089 $device get get get_func 1090 ${get_func:-:} "$device" "$file" ${3+"$probe"} 1091} 1092 1093# f_device_shutdown $device 1094# 1095# Shutdown a device by evaluating its `shutdown' function. The $device argument 1096# is a DEVICE struct name. 1097# 1098f_device_shutdown() 1099{ 1100 local device="$1" shutdown_func 1101 f_struct "$device" || return $? 1102 $device get shutdown shutdown_func 1103 ${shutdown_func:-:} "$device" 1104} 1105 1106# f_devices_sort_by $property $var_to_get [$var_to_set] 1107# 1108# Take list of devices from $var_to_get (separated by whitespace, newline 1109# included) and sort them by $property (e.g., `name'). The sorted list of 1110# DEVICE struct names is returned on standard output separated by whitespace 1111# (newline to be specific) unless $var_to_set is present and non-NULL. 1112# 1113# This function is a two-parter. Below is the awk(1) portion of the function, 1114# afterward is the sh(1) function which utilizes the below awk script. 1115# 1116f_device_sort_by_awk=' 1117# Variables that should be defined on the invocation line: 1118# -v prop="property" 1119function _asorti(src, dest) 1120{ 1121 k = nitems = 0 1122 for (i in src) dest[++nitems] = i 1123 for (i = 1; i <= nitems; k = i++) { 1124 idx = dest[i] 1125 while ((k > 0) && (dest[k] > idx)) { 1126 dest[k+1] = dest[k]; k-- 1127 } 1128 dest[k+1] = idx 1129 } 1130 return nitems 1131} 1132{ 1133 split($0, devs, FS) 1134 for (d in devs) { 1135 name = ENVIRON["_struct_value_" devs[d] "_" prop] 1136 devices[name] = devs[d] 1137 } 1138} 1139END { 1140 nitems = _asorti(devices, devices_sorted) 1141 for (i = 1; i <= nitems; i++) print devices[devices_sorted[i]] 1142} 1143' 1144f_device_sort_by() 1145{ 1146 local __property="${1:-name}" __var_to_get="$2" __var_to_set="$3" 1147 1148 f_isset "$__var_to_get" || return $FAILURE 1149 1150 local __dev 1151 for __dev in $( f_getvar "$__var_to_get" ); do 1152 export _struct_value_${__dev}_$__property 1153 done 1154 1155 local __cp 1156 setvar "${__var_to_set:-__cp}" "$( 1157 f_getvar "$__var_to_get" | 1158 awk -v prop="$__property" "$f_device_sort_by_awk" 1159 )" 1160 [ "$__var_to_set" ] || echo "$__cp" 1161} 1162 1163# f_device_menu $title $prompt $hline $device_type [$helpfile] 1164# 1165# Display a menu listing all the devices of a certain type in the system. 1166# 1167f_device_menu() 1168{ 1169 f_dialog_title "$1" 1170 local title="$DIALOG_TITLE" btitle="$DIALOG_BACKTITLE" 1171 f_dialog_title_restore 1172 1173 local prompt="$2" hline="$3" type="$4" helpfile="$5" 1174 1175 local devs 1176 f_device_find "" "$type" devs || return $DIALOG_CANCEL 1177 1178 local name desc menu_list= 1179 f_device_sort_by name devs devs 1180 for dev in $devs; do 1181 $dev get name name 1182 $dev get desc desc 1183 f_shell_escape "$name" name 1184 f_shell_escape "$desc" desc 1185 menu_list="$menu_list 1186 '$name' '$desc'" # END-QUOTE 1187 done 1188 menu_list="${menu_list#$NL}" 1189 1190 local height width rows 1191 eval f_dialog_menu_size height width rows \ 1192 \"\$title\" \ 1193 \"\$btitle\" \ 1194 \"\$prompt\" \ 1195 \"\$hline\" \ 1196 $menu_list 1197 1198 local errexit= 1199 case $- in *e*) errexit=1; esac 1200 set +e 1201 1202 local mtag 1203 while :; do 1204 mtag=$( eval $DIALOG \ 1205 --title \"\$title\" \ 1206 --backtitle \"\$btitle\" \ 1207 --hline \"\$hline\" \ 1208 --ok-label \"\$msg_ok\" \ 1209 --cancel-label \"\$msg_cancel\" \ 1210 ${helpfile:+ \ 1211 --help-button \ 1212 --help-label \"\$msg_help\" \ 1213 ${USE_XDIALOG:+--help \"\"} \ 1214 } \ 1215 --menu \"\$prompt\" \ 1216 $height $width $rows \ 1217 $menu_list \ 1218 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 1219 ) 1220 local retval=$? 1221 1222 [ $retval -ne $DIALOG_HELP ] && break 1223 # Otherwise, the Help button was pressed 1224 f_show_help "$helpfile" 1225 # ...then loop back to menu 1226 done 1227 f_dprintf "retval=%u mtag=[%s]" $retval "$mtag" 1228 1229 [ "$errexit" ] && set -e 1230 1231 if [ $retval -eq $DIALOG_OK ]; then 1232 # Clean up the output of [X]dialog(1) 1233 f_dialog_data_sanitize mtag 1234 1235 # Map the user's choice back to a struct name 1236 local index device 1237 index=$( eval f_dialog_menutag2index \"\$mtag\" $menu_list ) 1238 device=$( set -- $devs; eval echo \${$index} ) 1239 1240 echo "$device" >&2 1241 fi 1242 1243 return $retval 1244} 1245 1246# 1247# Short-hand 1248# 1249f_cdrom() { f_device_catalog_set $DEVICE_TYPE_CDROM "$1" "$2"; } 1250f_disk() { f_device_catalog_set $DEVICE_TYPE_DISK "$1" "$2"; } 1251f_floppy() { f_device_catalog_set $DEVICE_TYPE_FLOPPY "$1" "$2"; } 1252f_usb() { f_device_catalog_set $DEVICE_TYPE_USB "$1" "$2"; } 1253f_network() { f_device_catalog_set $DEVICE_TYPE_NETWORK "$1" "$2"; } 1254 1255############################################################ MAIN 1256 1257# 1258# The below classifications allow us to re-group the GEOM devices from the 1259# `DEV' GEOM class appropriately while providing fall-back descriptions both 1260# for making the below code more maintainable and handling the rare case the 1261# GEOM device lacks a description. 1262# 1263 1264DEVICE_CATALOG_APPEND_ONLY=1 # Make initial loading faster 1265 1266# CDROM, Disk, Floppy, and USB devices/names 1267f_cdrom "cd%d" "SCSI CDROM drive" 1268f_cdrom "mcd%d" "Mitsumi (old model) CDROM drive" 1269f_cdrom "scd%d" "Sony CDROM drive - CDU31/33A type" 1270f_disk "aacd%d" "Adaptec FSA RAID array" 1271f_disk "ada%d" "ATA/SATA disk device" 1272f_disk "amrd%d" "AMI MegaRAID drive" 1273f_disk "da%d" "SCSI disk device" 1274f_disk "idad%d" "Compaq RAID array" 1275f_disk "ipsd%d" "IBM ServeRAID RAID array" 1276f_disk "md%d" "md(4) disk device" 1277f_disk "mfid%d" "LSI MegaRAID SAS array" 1278f_disk "mlxd%d" "Mylex RAID disk" 1279f_disk "twed%d" "3ware ATA RAID array" 1280f_disk "vtbd%d" "VirtIO Block Device" 1281f_floppy "fd%d" "Floppy Drive unit A" 1282f_usb "da%da" "USB Mass Storage Device" 1283 1284# Network interfaces/names 1285f_network "ae%d" "Attansic/Atheros L2 Fast Ethernet" 1286f_network "age%d" "Attansic/Atheros L1 Gigabit Ethernet" 1287f_network "alc%d" "Atheros AR8131/AR8132 PCIe Ethernet" 1288f_network "ale%d" "Atheros AR8121/AR8113/AR8114 PCIe Ethernet" 1289f_network "an%d" "Aironet 4500/4800 802.11 wireless adapter" 1290f_network "ath%d" "Atheros IEEE 802.11 wireless adapter" 1291f_network "aue%d" "ADMtek USB Ethernet adapter" 1292f_network "axe%d" "ASIX Electronics USB Ethernet adapter" 1293f_network "bce%d" "Broadcom NetXtreme II Gigabit Ethernet card" 1294f_network "bfe%d" "Broadcom BCM440x PCI Ethernet card" 1295f_network "bge%d" "Broadcom BCM570x PCI Gigabit Ethernet card" 1296f_network "bm%d" "Apple BMAC Built-in Ethernet" 1297f_network "bwn%d" "Broadcom BCM43xx IEEE 802.11 wireless adapter" 1298f_network "cas%d" "Sun Cassini/Cassini+ or NS DP83065 Saturn Ethernet" 1299f_network "cc3i%d" "SDL HSSI sync serial PCI card" 1300f_network "cue%d" "CATC USB Ethernet adapter" 1301f_network "cxgb%d" "Chelsio T3 10Gb Ethernet card" 1302f_network "dc%d" "DEC/Intel 21143 (and clones) PCI Fast Ethernet card" 1303f_network "de%d" "DEC DE435 PCI NIC or other DC21040-AA based card" 1304f_network "disc%d" "Software discard network interface" 1305f_network "ed%d" "Novell NE1000/2000; 3C503; NE2000-compatible PCMCIA" 1306f_network "el%d" "3Com 3C501 Ethernet card" 1307f_network "em%d" "Intel(R) PRO/1000 Ethernet card" 1308f_network "en%d" "Efficient Networks ATM PCI card" 1309f_network "ep%d" "3Com 3C509 Ethernet card/3C589 PCMCIA" 1310f_network "et%d" "Agere ET1310 based PCI Express Gigabit Ethernet card" 1311f_network "ex%d" "Intel EtherExpress Pro/10 Ethernet card" 1312f_network "fe%d" "Fujitsu MB86960A/MB86965A Ethernet card" 1313f_network "fpa%d" "DEC DEFPA PCI FDDI card" 1314f_network "fwe%d" "FireWire Ethernet emulation" 1315f_network "fwip%d" "IP over FireWire" 1316f_network "fxp%d" "Intel EtherExpress Pro/100B PCI Fast Ethernet card" 1317f_network "gem%d" "Apple GMAC or Sun ERI/GEM Ethernet adapter" 1318f_network "hme%d" "Sun HME (Happy Meal Ethernet) Ethernet adapter" 1319f_network "ie%d" "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" 1320f_network "igb%d" "Intel(R) PRO/1000 PCI Express Gigabit Ethernet card" 1321f_network "ipw%d" "Intel PRO/Wireless 2100 IEEE 802.11 adapter" 1322f_network "iwi%d" "Intel PRO/Wireless 2200BG/2225BG/2915ABG adapter" 1323f_network "iwn%d" "Intel Wireless WiFi Link 4965AGN IEEE 802.11n adapter" 1324f_network "ix%d" "Intel Etherexpress Ethernet card" 1325f_network "ixgb%d" "Intel(R) PRO/10Gb Ethernet card" 1326f_network "ixgbe%d" "Intel(R) PRO/10Gb Ethernet card" 1327f_network "jme%d" "JMicron JMC250 Gigabit/JMC260 Fast Ethernet" 1328f_network "kue%d" "Kawasaki LSI USB Ethernet adapter" 1329f_network "le%d" "AMD Am7900 LANCE or Am79C9xx PCnet Ethernet adapter" 1330f_network "lge%d" "Level 1 LXT1001 Gigabit Ethernet card" 1331f_network "lnc%d" "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) Ethernet" 1332f_network "lo%d" "Loop-back (local) network interface" 1333f_network "lp%d" "Parallel Port IP (PLIP) peer connection" 1334f_network "malo%d" "Marvell Libertas 88W8335 802.11 wireless adapter" 1335f_network "msk%d" "Marvell/SysKonnect Yukon II Gigabit Ethernet" 1336f_network "mxge%d" "Myricom Myri10GE 10Gb Ethernet card" 1337f_network "nfe%d" "NVIDIA nForce MCP Ethernet" 1338f_network "ng%d" "Vimage netgraph(4) bridged Ethernet device" 1339f_network "nge%d" "NatSemi PCI Gigabit Ethernet card" 1340f_network "nve%d" "NVIDIA nForce MCP Ethernet" 1341f_network "nxge%d" "Neterion Xframe 10GbE Server/Storage adapter" 1342f_network "pcn%d" "AMD Am79c79x PCI Ethernet card" 1343f_network "plip%d" "Parallel Port IP (PLIP) peer connection" 1344f_network "ral%d" "Ralink Technology IEEE 802.11 wireless adapter" 1345f_network "ray%d" "Raytheon Raylink 802.11 wireless adapter" 1346f_network "re%d" "RealTek 8139C+/8169/8169S/8110S PCI Ethernet adapter" 1347f_network "rl%d" "RealTek 8129/8139 PCI Ethernet card" 1348f_network "rue%d" "RealTek USB Ethernet card" 1349f_network "rum%d" "Ralink Technology USB IEEE 802.11 wireless adapter" 1350f_network "sf%d" "Adaptec AIC-6915 PCI Ethernet card" 1351f_network "sge%d" "Silicon Integrated Systems SiS190/191 Ethernet" 1352f_network "sis%d" "SiS 900/SiS 7016 PCI Ethernet card" 1353f_network "sk%d" "SysKonnect PCI Gigabit Ethernet card" 1354f_network "sn%d" "SMC/Megahertz Ethernet card" 1355f_network "snc%d" "SONIC Ethernet card" 1356f_network "sr%d" "SDL T1/E1 sync serial PCI card" 1357f_network "ste%d" "Sundance ST201 PCI Ethernet card" 1358f_network "stge%d" "Sundance/Tamarack TC9021 Gigabit Ethernet" 1359f_network "ti%d" "Alteon Networks PCI Gigabit Ethernet card" 1360f_network "tl%d" "Texas Instruments ThunderLAN PCI Ethernet card" 1361f_network "tx%d" "SMC 9432TX Ethernet card" 1362f_network "txp%d" "3Com 3cR990 Ethernet card" 1363f_network "uath%d" "Atheros AR5005UG and AR5005UX USB wireless adapter" 1364f_network "upgt%d" "Conexant/Intersil PrismGT USB wireless adapter" 1365f_network "ural%d" "Ralink Technology RT2500USB 802.11 wireless adapter" 1366f_network "urtw%d" "Realtek 8187L USB wireless adapter" 1367f_network "vge%d" "VIA VT612x PCI Gigabit Ethernet card" 1368f_network "vlan%d" "IEEE 802.1Q VLAN network interface" 1369f_network "vr%d" "VIA VT3043/VT86C100A Rhine PCI Ethernet card" 1370f_network "vx%d" "3COM 3c590 / 3c595 Ethernet card" 1371f_network "wb%d" "Winbond W89C840F PCI Ethernet card" 1372f_network "wi%d" "Lucent WaveLAN/IEEE 802.11 wireless adapter" 1373f_network "wpi%d" "Intel 3945ABG IEEE 802.11 wireless adapter" 1374f_network "wx%d" "Intel Gigabit Ethernet (82452) card" 1375f_network "xe%d" "Xircom/Intel EtherExpress Pro100/16 Ethernet card" 1376f_network "xl%d" "3COM 3c90x / 3c90xB PCI Ethernet card" 1377f_network "zyd%d" "ZyDAS ZD1211/ZD1211B USB 802.11 wireless adapter" 1378 1379DEVICE_CATALOG_APPEND_ONLY= # Additional loading modifies existing devices 1380 1381f_count NCATALOG_DEVICES $DEVICE_CATALOG 1382f_dprintf "%s: Initialized device catalog with %u names/descriptions." \ 1383 device.subr $NCATALOG_DEVICES 1384 1385# 1386# Scan for the above devices unless requeted otherwise 1387# 1388f_dprintf "%s: DEVICE_SELF_SCAN_ALL=[%s]" device.subr "$DEVICE_SELF_SCAN_ALL" 1389case "$DEVICE_SELF_SCAN_ALL" in 1390""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;; 1391*) f_device_get_all 1392esac 1393 1394f_dprintf "%s: Successfully loaded." device.subr 1395 1396fi # ! $_DEVICE_SUBR 1397