1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2013 Chris Torek <torek @ torek net> 5 * All rights reserved. 6 * Copyright (c) 2019 Joyent, Inc. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 #include <sys/param.h> 32 #include <sys/uio.h> 33 34 #include <machine/atomic.h> 35 36 #include <dev/virtio/pci/virtio_pci_legacy_var.h> 37 38 #include <stdio.h> 39 #include <stdint.h> 40 #include <string.h> 41 #include <pthread.h> 42 #include <pthread_np.h> 43 44 #include "bhyverun.h" 45 #include "debug.h" 46 #include "pci_emul.h" 47 #ifdef BHYVE_SNAPSHOT 48 #include "snapshot.h" 49 #endif 50 #include "virtio.h" 51 52 /* 53 * Functions for dealing with generalized "virtual devices" as 54 * defined by <https://www.google.com/#output=search&q=virtio+spec> 55 */ 56 57 /* 58 * In case we decide to relax the "virtio softc comes at the 59 * front of virtio-based device softc" constraint, let's use 60 * this to convert. 61 */ 62 #define DEV_SOFTC(vs) ((void *)(vs)) 63 64 /* 65 * Link a virtio_softc to its constants, the device softc, and 66 * the PCI emulation. 67 */ 68 void 69 vi_softc_linkup(struct virtio_softc *vs, struct virtio_consts *vc, 70 void *dev_softc, struct pci_devinst *pi, 71 struct vqueue_info *queues) 72 { 73 int i; 74 75 /* vs and dev_softc addresses must match */ 76 assert((void *)vs == dev_softc); 77 vs->vs_vc = vc; 78 vs->vs_pi = pi; 79 pi->pi_arg = vs; 80 81 vs->vs_queues = queues; 82 for (i = 0; i < vc->vc_nvq; i++) { 83 queues[i].vq_vs = vs; 84 queues[i].vq_num = i; 85 } 86 } 87 88 /* 89 * Reset device (device-wide). This erases all queues, i.e., 90 * all the queues become invalid (though we don't wipe out the 91 * internal pointers, we just clear the VQ_ALLOC flag). 92 * 93 * It resets negotiated features to "none". 94 * 95 * If MSI-X is enabled, this also resets all the vectors to NO_VECTOR. 96 */ 97 void 98 vi_reset_dev(struct virtio_softc *vs) 99 { 100 struct vqueue_info *vq; 101 int i, nvq; 102 103 if (vs->vs_mtx) 104 assert(pthread_mutex_isowned_np(vs->vs_mtx)); 105 106 nvq = vs->vs_vc->vc_nvq; 107 for (vq = vs->vs_queues, i = 0; i < nvq; vq++, i++) { 108 vq->vq_flags = 0; 109 vq->vq_last_avail = 0; 110 vq->vq_next_used = 0; 111 vq->vq_save_used = 0; 112 vq->vq_pfn = 0; 113 vq->vq_msix_idx = VIRTIO_MSI_NO_VECTOR; 114 } 115 vs->vs_negotiated_caps = 0; 116 vs->vs_curq = 0; 117 /* vs->vs_status = 0; -- redundant */ 118 if (vs->vs_isr) 119 pci_lintr_deassert(vs->vs_pi); 120 vs->vs_isr = 0; 121 vs->vs_msix_cfg_idx = VIRTIO_MSI_NO_VECTOR; 122 } 123 124 /* 125 * Set I/O BAR (usually 0) to map PCI config registers. 126 */ 127 void 128 vi_set_io_bar(struct virtio_softc *vs, int barnum) 129 { 130 size_t size; 131 132 /* 133 * ??? should we use VIRTIO_PCI_CONFIG_OFF(0) if MSI-X is disabled? 134 * Existing code did not... 135 */ 136 size = VIRTIO_PCI_CONFIG_OFF(1) + vs->vs_vc->vc_cfgsize; 137 pci_emul_alloc_bar(vs->vs_pi, barnum, PCIBAR_IO, size); 138 } 139 140 /* 141 * Initialize MSI-X vector capabilities if we're to use MSI-X, 142 * or MSI capabilities if not. 143 * 144 * We assume we want one MSI-X vector per queue, here, plus one 145 * for the config vec. 146 */ 147 int 148 vi_intr_init(struct virtio_softc *vs, int barnum, int use_msix) 149 { 150 int nvec; 151 152 if (use_msix) { 153 vs->vs_flags |= VIRTIO_USE_MSIX; 154 VS_LOCK(vs); 155 vi_reset_dev(vs); /* set all vectors to NO_VECTOR */ 156 VS_UNLOCK(vs); 157 nvec = vs->vs_vc->vc_nvq + 1; 158 if (pci_emul_add_msixcap(vs->vs_pi, nvec, barnum)) 159 return (1); 160 } else 161 vs->vs_flags &= ~VIRTIO_USE_MSIX; 162 163 /* Only 1 MSI vector for bhyve */ 164 pci_emul_add_msicap(vs->vs_pi, 1); 165 166 /* Legacy interrupts are mandatory for virtio devices */ 167 pci_lintr_request(vs->vs_pi); 168 169 return (0); 170 } 171 172 /* 173 * Initialize the currently-selected virtio queue (vs->vs_curq). 174 * The guest just gave us a page frame number, from which we can 175 * calculate the addresses of the queue. 176 */ 177 static void 178 vi_vq_init(struct virtio_softc *vs, uint32_t pfn) 179 { 180 struct vqueue_info *vq; 181 uint64_t phys; 182 size_t size; 183 char *base; 184 185 vq = &vs->vs_queues[vs->vs_curq]; 186 vq->vq_pfn = pfn; 187 phys = (uint64_t)pfn << VRING_PFN; 188 size = vring_size_aligned(vq->vq_qsize); 189 base = paddr_guest2host(vs->vs_pi->pi_vmctx, phys, size); 190 191 /* First page(s) are descriptors... */ 192 vq->vq_desc = (struct vring_desc *)base; 193 base += vq->vq_qsize * sizeof(struct vring_desc); 194 195 /* ... immediately followed by "avail" ring (entirely uint16_t's) */ 196 vq->vq_avail = (struct vring_avail *)base; 197 base += (2 + vq->vq_qsize + 1) * sizeof(uint16_t); 198 199 /* Then it's rounded up to the next page... */ 200 base = (char *)roundup2((uintptr_t)base, VRING_ALIGN); 201 202 /* ... and the last page(s) are the used ring. */ 203 vq->vq_used = (struct vring_used *)base; 204 205 /* Mark queue as allocated, and start at 0 when we use it. */ 206 vq->vq_flags = VQ_ALLOC; 207 vq->vq_last_avail = 0; 208 vq->vq_next_used = 0; 209 vq->vq_save_used = 0; 210 } 211 212 /* 213 * Helper inline for vq_getchain(): record the i'th "real" 214 * descriptor. 215 */ 216 static inline void 217 _vq_record(int i, struct vring_desc *vd, struct vmctx *ctx, struct iovec *iov, 218 int n_iov, struct vi_req *reqp) 219 { 220 if (i >= n_iov) 221 return; 222 iov[i].iov_base = paddr_guest2host(ctx, vd->addr, vd->len); 223 iov[i].iov_len = vd->len; 224 if ((vd->flags & VRING_DESC_F_WRITE) == 0) 225 reqp->readable++; 226 else 227 reqp->writable++; 228 } 229 #define VQ_MAX_DESCRIPTORS 512 /* see below */ 230 231 /* 232 * Examine the chain of descriptors starting at the "next one" to 233 * make sure that they describe a sensible request. If so, return 234 * the number of "real" descriptors that would be needed/used in 235 * acting on this request. This may be smaller than the number of 236 * available descriptors, e.g., if there are two available but 237 * they are two separate requests, this just returns 1. Or, it 238 * may be larger: if there are indirect descriptors involved, 239 * there may only be one descriptor available but it may be an 240 * indirect pointing to eight more. We return 8 in this case, 241 * i.e., we do not count the indirect descriptors, only the "real" 242 * ones. 243 * 244 * Basically, this vets the "flags" and "next" field of each 245 * descriptor and tells you how many are involved. Since some may 246 * be indirect, this also needs the vmctx (in the pci_devinst 247 * at vs->vs_pi) so that it can find indirect descriptors. 248 * 249 * As we process each descriptor, we copy and adjust it (guest to 250 * host address wise, also using the vmtctx) into the given iov[] 251 * array (of the given size). If the array overflows, we stop 252 * placing values into the array but keep processing descriptors, 253 * up to VQ_MAX_DESCRIPTORS, before giving up and returning -1. 254 * So you, the caller, must not assume that iov[] is as big as the 255 * return value (you can process the same thing twice to allocate 256 * a larger iov array if needed, or supply a zero length to find 257 * out how much space is needed). 258 * 259 * If some descriptor(s) are invalid, this prints a diagnostic message 260 * and returns -1. If no descriptors are ready now it simply returns 0. 261 * 262 * You are assumed to have done a vq_ring_ready() if needed (note 263 * that vq_has_descs() does one). 264 */ 265 int 266 vq_getchain(struct vqueue_info *vq, struct iovec *iov, int niov, 267 struct vi_req *reqp) 268 { 269 int i; 270 u_int ndesc, n_indir; 271 u_int idx, next; 272 struct vi_req req; 273 struct vring_desc *vdir, *vindir, *vp; 274 struct vmctx *ctx; 275 struct virtio_softc *vs; 276 const char *name; 277 278 vs = vq->vq_vs; 279 name = vs->vs_vc->vc_name; 280 memset(&req, 0, sizeof(req)); 281 282 /* 283 * Note: it's the responsibility of the guest not to 284 * update vq->vq_avail->idx until all of the descriptors 285 * the guest has written are valid (including all their 286 * "next" fields and "flags"). 287 * 288 * Compute (vq_avail->idx - last_avail) in integers mod 2**16. This is 289 * the number of descriptors the device has made available 290 * since the last time we updated vq->vq_last_avail. 291 * 292 * We just need to do the subtraction as an unsigned int, 293 * then trim off excess bits. 294 */ 295 idx = vq->vq_last_avail; 296 ndesc = (uint16_t)((u_int)vq->vq_avail->idx - idx); 297 if (ndesc == 0) 298 return (0); 299 if (ndesc > vq->vq_qsize) { 300 /* XXX need better way to diagnose issues */ 301 EPRINTLN( 302 "%s: ndesc (%u) out of range, driver confused?", 303 name, (u_int)ndesc); 304 return (-1); 305 } 306 307 /* 308 * Now count/parse "involved" descriptors starting from 309 * the head of the chain. 310 * 311 * To prevent loops, we could be more complicated and 312 * check whether we're re-visiting a previously visited 313 * index, but we just abort if the count gets excessive. 314 */ 315 ctx = vs->vs_pi->pi_vmctx; 316 req.idx = next = vq->vq_avail->ring[idx & (vq->vq_qsize - 1)]; 317 vq->vq_last_avail++; 318 for (i = 0; i < VQ_MAX_DESCRIPTORS; next = vdir->next) { 319 if (next >= vq->vq_qsize) { 320 EPRINTLN( 321 "%s: descriptor index %u out of range, " 322 "driver confused?", 323 name, next); 324 return (-1); 325 } 326 vdir = &vq->vq_desc[next]; 327 if ((vdir->flags & VRING_DESC_F_INDIRECT) == 0) { 328 _vq_record(i, vdir, ctx, iov, niov, &req); 329 i++; 330 } else if ((vs->vs_vc->vc_hv_caps & 331 VIRTIO_RING_F_INDIRECT_DESC) == 0) { 332 EPRINTLN( 333 "%s: descriptor has forbidden INDIRECT flag, " 334 "driver confused?", 335 name); 336 return (-1); 337 } else { 338 n_indir = vdir->len / 16; 339 if ((vdir->len & 0xf) || n_indir == 0) { 340 EPRINTLN( 341 "%s: invalid indir len 0x%x, " 342 "driver confused?", 343 name, (u_int)vdir->len); 344 return (-1); 345 } 346 vindir = paddr_guest2host(ctx, 347 vdir->addr, vdir->len); 348 /* 349 * Indirects start at the 0th, then follow 350 * their own embedded "next"s until those run 351 * out. Each one's indirect flag must be off 352 * (we don't really have to check, could just 353 * ignore errors...). 354 */ 355 next = 0; 356 for (;;) { 357 vp = &vindir[next]; 358 if (vp->flags & VRING_DESC_F_INDIRECT) { 359 EPRINTLN( 360 "%s: indirect desc has INDIR flag," 361 " driver confused?", 362 name); 363 return (-1); 364 } 365 _vq_record(i, vp, ctx, iov, niov, &req); 366 if (++i > VQ_MAX_DESCRIPTORS) 367 goto loopy; 368 if ((vp->flags & VRING_DESC_F_NEXT) == 0) 369 break; 370 next = vp->next; 371 if (next >= n_indir) { 372 EPRINTLN( 373 "%s: invalid next %u > %u, " 374 "driver confused?", 375 name, (u_int)next, n_indir); 376 return (-1); 377 } 378 } 379 } 380 if ((vdir->flags & VRING_DESC_F_NEXT) == 0) 381 goto done; 382 } 383 384 loopy: 385 EPRINTLN( 386 "%s: descriptor loop? count > %d - driver confused?", 387 name, i); 388 return (-1); 389 390 done: 391 *reqp = req; 392 return (i); 393 } 394 395 /* 396 * Return the first n_chain request chains back to the available queue. 397 * 398 * (These chains are the ones you handled when you called vq_getchain() 399 * and used its positive return value.) 400 */ 401 void 402 vq_retchains(struct vqueue_info *vq, uint16_t n_chains) 403 { 404 405 vq->vq_last_avail -= n_chains; 406 } 407 408 void 409 vq_relchain_prepare(struct vqueue_info *vq, uint16_t idx, uint32_t iolen) 410 { 411 struct vring_used *vuh; 412 struct vring_used_elem *vue; 413 uint16_t mask; 414 415 /* 416 * Notes: 417 * - mask is N-1 where N is a power of 2 so computes x % N 418 * - vuh points to the "used" data shared with guest 419 * - vue points to the "used" ring entry we want to update 420 */ 421 mask = vq->vq_qsize - 1; 422 vuh = vq->vq_used; 423 424 vue = &vuh->ring[vq->vq_next_used++ & mask]; 425 vue->id = idx; 426 vue->len = iolen; 427 } 428 429 void 430 vq_relchain_publish(struct vqueue_info *vq) 431 { 432 /* 433 * Ensure the used descriptor is visible before updating the index. 434 * This is necessary on ISAs with memory ordering less strict than x86 435 * (and even on x86 to act as a compiler barrier). 436 */ 437 atomic_thread_fence_rel(); 438 vq->vq_used->idx = vq->vq_next_used; 439 } 440 441 /* 442 * Return specified request chain to the guest, setting its I/O length 443 * to the provided value. 444 * 445 * (This chain is the one you handled when you called vq_getchain() 446 * and used its positive return value.) 447 */ 448 void 449 vq_relchain(struct vqueue_info *vq, uint16_t idx, uint32_t iolen) 450 { 451 vq_relchain_prepare(vq, idx, iolen); 452 vq_relchain_publish(vq); 453 } 454 455 /* 456 * Driver has finished processing "available" chains and calling 457 * vq_relchain on each one. If driver used all the available 458 * chains, used_all should be set. 459 * 460 * If the "used" index moved we may need to inform the guest, i.e., 461 * deliver an interrupt. Even if the used index did NOT move we 462 * may need to deliver an interrupt, if the avail ring is empty and 463 * we are supposed to interrupt on empty. 464 * 465 * Note that used_all_avail is provided by the caller because it's 466 * a snapshot of the ring state when he decided to finish interrupt 467 * processing -- it's possible that descriptors became available after 468 * that point. (It's also typically a constant 1/True as well.) 469 */ 470 void 471 vq_endchains(struct vqueue_info *vq, int used_all_avail) 472 { 473 struct virtio_softc *vs; 474 uint16_t event_idx, new_idx, old_idx; 475 int intr; 476 477 /* 478 * Interrupt generation: if we're using EVENT_IDX, 479 * interrupt if we've crossed the event threshold. 480 * Otherwise interrupt is generated if we added "used" entries, 481 * but suppressed by VRING_AVAIL_F_NO_INTERRUPT. 482 * 483 * In any case, though, if NOTIFY_ON_EMPTY is set and the 484 * entire avail was processed, we need to interrupt always. 485 */ 486 vs = vq->vq_vs; 487 old_idx = vq->vq_save_used; 488 vq->vq_save_used = new_idx = vq->vq_used->idx; 489 490 /* 491 * Use full memory barrier between "idx" store from preceding 492 * vq_relchain() call and the loads from VQ_USED_EVENT_IDX() or 493 * "flags" field below. 494 */ 495 atomic_thread_fence_seq_cst(); 496 if (used_all_avail && 497 (vs->vs_negotiated_caps & VIRTIO_F_NOTIFY_ON_EMPTY)) 498 intr = 1; 499 else if (vs->vs_negotiated_caps & VIRTIO_RING_F_EVENT_IDX) { 500 event_idx = VQ_USED_EVENT_IDX(vq); 501 /* 502 * This calculation is per docs and the kernel 503 * (see src/sys/dev/virtio/virtio_ring.h). 504 */ 505 intr = (uint16_t)(new_idx - event_idx - 1) < 506 (uint16_t)(new_idx - old_idx); 507 } else { 508 intr = new_idx != old_idx && 509 !(vq->vq_avail->flags & VRING_AVAIL_F_NO_INTERRUPT); 510 } 511 if (intr) 512 vq_interrupt(vs, vq); 513 } 514 515 /* Note: these are in sorted order to make for a fast search */ 516 static struct config_reg { 517 uint16_t cr_offset; /* register offset */ 518 uint8_t cr_size; /* size (bytes) */ 519 uint8_t cr_ro; /* true => reg is read only */ 520 const char *cr_name; /* name of reg */ 521 } config_regs[] = { 522 { VIRTIO_PCI_HOST_FEATURES, 4, 1, "HOST_FEATURES" }, 523 { VIRTIO_PCI_GUEST_FEATURES, 4, 0, "GUEST_FEATURES" }, 524 { VIRTIO_PCI_QUEUE_PFN, 4, 0, "QUEUE_PFN" }, 525 { VIRTIO_PCI_QUEUE_NUM, 2, 1, "QUEUE_NUM" }, 526 { VIRTIO_PCI_QUEUE_SEL, 2, 0, "QUEUE_SEL" }, 527 { VIRTIO_PCI_QUEUE_NOTIFY, 2, 0, "QUEUE_NOTIFY" }, 528 { VIRTIO_PCI_STATUS, 1, 0, "STATUS" }, 529 { VIRTIO_PCI_ISR, 1, 0, "ISR" }, 530 { VIRTIO_MSI_CONFIG_VECTOR, 2, 0, "CONFIG_VECTOR" }, 531 { VIRTIO_MSI_QUEUE_VECTOR, 2, 0, "QUEUE_VECTOR" }, 532 }; 533 534 static inline struct config_reg * 535 vi_find_cr(int offset) { 536 u_int hi, lo, mid; 537 struct config_reg *cr; 538 539 lo = 0; 540 hi = sizeof(config_regs) / sizeof(*config_regs) - 1; 541 while (hi >= lo) { 542 mid = (hi + lo) >> 1; 543 cr = &config_regs[mid]; 544 if (cr->cr_offset == offset) 545 return (cr); 546 if (cr->cr_offset < offset) 547 lo = mid + 1; 548 else 549 hi = mid - 1; 550 } 551 return (NULL); 552 } 553 554 /* 555 * Handle pci config space reads. 556 * If it's to the MSI-X info, do that. 557 * If it's part of the virtio standard stuff, do that. 558 * Otherwise dispatch to the actual driver. 559 */ 560 uint64_t 561 vi_pci_read(struct pci_devinst *pi, int baridx, uint64_t offset, int size) 562 { 563 struct virtio_softc *vs = pi->pi_arg; 564 struct virtio_consts *vc; 565 struct config_reg *cr; 566 uint64_t virtio_config_size, max; 567 const char *name; 568 uint32_t newoff; 569 uint32_t value; 570 int error; 571 572 if (vs->vs_flags & VIRTIO_USE_MSIX) { 573 if (baridx == pci_msix_table_bar(pi) || 574 baridx == pci_msix_pba_bar(pi)) { 575 return (pci_emul_msix_tread(pi, offset, size)); 576 } 577 } 578 579 /* XXX probably should do something better than just assert() */ 580 assert(baridx == 0); 581 582 if (vs->vs_mtx) 583 pthread_mutex_lock(vs->vs_mtx); 584 585 vc = vs->vs_vc; 586 name = vc->vc_name; 587 value = size == 1 ? 0xff : size == 2 ? 0xffff : 0xffffffff; 588 589 if (size != 1 && size != 2 && size != 4) 590 goto bad; 591 592 virtio_config_size = VIRTIO_PCI_CONFIG_OFF(pci_msix_enabled(pi)); 593 594 if (offset >= virtio_config_size) { 595 /* 596 * Subtract off the standard size (including MSI-X 597 * registers if enabled) and dispatch to underlying driver. 598 * If that fails, fall into general code. 599 */ 600 newoff = offset - virtio_config_size; 601 max = vc->vc_cfgsize ? vc->vc_cfgsize : 0x100000000; 602 if (newoff + size > max) 603 goto bad; 604 if (vc->vc_cfgread != NULL) 605 error = (*vc->vc_cfgread)(DEV_SOFTC(vs), newoff, size, &value); 606 else 607 error = 0; 608 if (!error) 609 goto done; 610 } 611 612 bad: 613 cr = vi_find_cr(offset); 614 if (cr == NULL || cr->cr_size != size) { 615 if (cr != NULL) { 616 /* offset must be OK, so size must be bad */ 617 EPRINTLN( 618 "%s: read from %s: bad size %d", 619 name, cr->cr_name, size); 620 } else { 621 EPRINTLN( 622 "%s: read from bad offset/size %jd/%d", 623 name, (uintmax_t)offset, size); 624 } 625 goto done; 626 } 627 628 switch (offset) { 629 case VIRTIO_PCI_HOST_FEATURES: 630 value = vc->vc_hv_caps; 631 break; 632 case VIRTIO_PCI_GUEST_FEATURES: 633 value = vs->vs_negotiated_caps; 634 break; 635 case VIRTIO_PCI_QUEUE_PFN: 636 if (vs->vs_curq < vc->vc_nvq) 637 value = vs->vs_queues[vs->vs_curq].vq_pfn; 638 break; 639 case VIRTIO_PCI_QUEUE_NUM: 640 value = vs->vs_curq < vc->vc_nvq ? 641 vs->vs_queues[vs->vs_curq].vq_qsize : 0; 642 break; 643 case VIRTIO_PCI_QUEUE_SEL: 644 value = vs->vs_curq; 645 break; 646 case VIRTIO_PCI_QUEUE_NOTIFY: 647 value = 0; /* XXX */ 648 break; 649 case VIRTIO_PCI_STATUS: 650 value = vs->vs_status; 651 break; 652 case VIRTIO_PCI_ISR: 653 value = vs->vs_isr; 654 vs->vs_isr = 0; /* a read clears this flag */ 655 if (value) 656 pci_lintr_deassert(pi); 657 break; 658 case VIRTIO_MSI_CONFIG_VECTOR: 659 value = vs->vs_msix_cfg_idx; 660 break; 661 case VIRTIO_MSI_QUEUE_VECTOR: 662 value = vs->vs_curq < vc->vc_nvq ? 663 vs->vs_queues[vs->vs_curq].vq_msix_idx : 664 VIRTIO_MSI_NO_VECTOR; 665 break; 666 } 667 done: 668 if (vs->vs_mtx) 669 pthread_mutex_unlock(vs->vs_mtx); 670 return (value); 671 } 672 673 /* 674 * Handle pci config space writes. 675 * If it's to the MSI-X info, do that. 676 * If it's part of the virtio standard stuff, do that. 677 * Otherwise dispatch to the actual driver. 678 */ 679 void 680 vi_pci_write(struct pci_devinst *pi, int baridx, uint64_t offset, int size, 681 uint64_t value) 682 { 683 struct virtio_softc *vs = pi->pi_arg; 684 struct vqueue_info *vq; 685 struct virtio_consts *vc; 686 struct config_reg *cr; 687 uint64_t virtio_config_size, max; 688 const char *name; 689 uint32_t newoff; 690 int error; 691 692 if (vs->vs_flags & VIRTIO_USE_MSIX) { 693 if (baridx == pci_msix_table_bar(pi) || 694 baridx == pci_msix_pba_bar(pi)) { 695 pci_emul_msix_twrite(pi, offset, size, value); 696 return; 697 } 698 } 699 700 /* XXX probably should do something better than just assert() */ 701 assert(baridx == 0); 702 703 if (vs->vs_mtx) 704 pthread_mutex_lock(vs->vs_mtx); 705 706 vc = vs->vs_vc; 707 name = vc->vc_name; 708 709 if (size != 1 && size != 2 && size != 4) 710 goto bad; 711 712 virtio_config_size = VIRTIO_PCI_CONFIG_OFF(pci_msix_enabled(pi)); 713 714 if (offset >= virtio_config_size) { 715 /* 716 * Subtract off the standard size (including MSI-X 717 * registers if enabled) and dispatch to underlying driver. 718 */ 719 newoff = offset - virtio_config_size; 720 max = vc->vc_cfgsize ? vc->vc_cfgsize : 0x100000000; 721 if (newoff + size > max) 722 goto bad; 723 if (vc->vc_cfgwrite != NULL) 724 error = (*vc->vc_cfgwrite)(DEV_SOFTC(vs), newoff, size, value); 725 else 726 error = 0; 727 if (!error) 728 goto done; 729 } 730 731 bad: 732 cr = vi_find_cr(offset); 733 if (cr == NULL || cr->cr_size != size || cr->cr_ro) { 734 if (cr != NULL) { 735 /* offset must be OK, wrong size and/or reg is R/O */ 736 if (cr->cr_size != size) 737 EPRINTLN( 738 "%s: write to %s: bad size %d", 739 name, cr->cr_name, size); 740 if (cr->cr_ro) 741 EPRINTLN( 742 "%s: write to read-only reg %s", 743 name, cr->cr_name); 744 } else { 745 EPRINTLN( 746 "%s: write to bad offset/size %jd/%d", 747 name, (uintmax_t)offset, size); 748 } 749 goto done; 750 } 751 752 switch (offset) { 753 case VIRTIO_PCI_GUEST_FEATURES: 754 vs->vs_negotiated_caps = value & vc->vc_hv_caps; 755 if (vc->vc_apply_features) 756 (*vc->vc_apply_features)(DEV_SOFTC(vs), 757 vs->vs_negotiated_caps); 758 break; 759 case VIRTIO_PCI_QUEUE_PFN: 760 if (vs->vs_curq >= vc->vc_nvq) 761 goto bad_qindex; 762 vi_vq_init(vs, value); 763 break; 764 case VIRTIO_PCI_QUEUE_SEL: 765 /* 766 * Note that the guest is allowed to select an 767 * invalid queue; we just need to return a QNUM 768 * of 0 while the bad queue is selected. 769 */ 770 vs->vs_curq = value; 771 break; 772 case VIRTIO_PCI_QUEUE_NOTIFY: 773 if (value >= (unsigned int)vc->vc_nvq) { 774 EPRINTLN("%s: queue %d notify out of range", 775 name, (int)value); 776 goto done; 777 } 778 vq = &vs->vs_queues[value]; 779 if (vq->vq_notify) 780 (*vq->vq_notify)(DEV_SOFTC(vs), vq); 781 else if (vc->vc_qnotify) 782 (*vc->vc_qnotify)(DEV_SOFTC(vs), vq); 783 else 784 EPRINTLN( 785 "%s: qnotify queue %d: missing vq/vc notify", 786 name, (int)value); 787 break; 788 case VIRTIO_PCI_STATUS: 789 vs->vs_status = value; 790 if (value == 0) 791 (*vc->vc_reset)(DEV_SOFTC(vs)); 792 break; 793 case VIRTIO_MSI_CONFIG_VECTOR: 794 vs->vs_msix_cfg_idx = value; 795 break; 796 case VIRTIO_MSI_QUEUE_VECTOR: 797 if (vs->vs_curq >= vc->vc_nvq) 798 goto bad_qindex; 799 vq = &vs->vs_queues[vs->vs_curq]; 800 vq->vq_msix_idx = value; 801 break; 802 } 803 goto done; 804 805 bad_qindex: 806 EPRINTLN( 807 "%s: write config reg %s: curq %d >= max %d", 808 name, cr->cr_name, vs->vs_curq, vc->vc_nvq); 809 done: 810 if (vs->vs_mtx) 811 pthread_mutex_unlock(vs->vs_mtx); 812 } 813 814 #ifdef BHYVE_SNAPSHOT 815 int 816 vi_pci_pause(struct pci_devinst *pi) 817 { 818 struct virtio_softc *vs; 819 struct virtio_consts *vc; 820 821 vs = pi->pi_arg; 822 vc = vs->vs_vc; 823 824 vc = vs->vs_vc; 825 assert(vc->vc_pause != NULL); 826 (*vc->vc_pause)(DEV_SOFTC(vs)); 827 828 return (0); 829 } 830 831 int 832 vi_pci_resume(struct pci_devinst *pi) 833 { 834 struct virtio_softc *vs; 835 struct virtio_consts *vc; 836 837 vs = pi->pi_arg; 838 vc = vs->vs_vc; 839 840 vc = vs->vs_vc; 841 assert(vc->vc_resume != NULL); 842 (*vc->vc_resume)(DEV_SOFTC(vs)); 843 844 return (0); 845 } 846 847 static int 848 vi_pci_snapshot_softc(struct virtio_softc *vs, struct vm_snapshot_meta *meta) 849 { 850 int ret; 851 852 SNAPSHOT_VAR_OR_LEAVE(vs->vs_flags, meta, ret, done); 853 SNAPSHOT_VAR_OR_LEAVE(vs->vs_negotiated_caps, meta, ret, done); 854 SNAPSHOT_VAR_OR_LEAVE(vs->vs_curq, meta, ret, done); 855 SNAPSHOT_VAR_OR_LEAVE(vs->vs_status, meta, ret, done); 856 SNAPSHOT_VAR_OR_LEAVE(vs->vs_isr, meta, ret, done); 857 SNAPSHOT_VAR_OR_LEAVE(vs->vs_msix_cfg_idx, meta, ret, done); 858 859 done: 860 return (ret); 861 } 862 863 static int 864 vi_pci_snapshot_consts(struct virtio_consts *vc, struct vm_snapshot_meta *meta) 865 { 866 int ret; 867 868 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_nvq, meta, ret, done); 869 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_cfgsize, meta, ret, done); 870 SNAPSHOT_VAR_CMP_OR_LEAVE(vc->vc_hv_caps, meta, ret, done); 871 872 done: 873 return (ret); 874 } 875 876 static int 877 vi_pci_snapshot_queues(struct virtio_softc *vs, struct vm_snapshot_meta *meta) 878 { 879 int i; 880 int ret; 881 struct virtio_consts *vc; 882 struct vqueue_info *vq; 883 struct vmctx *ctx; 884 uint64_t addr_size; 885 886 ctx = vs->vs_pi->pi_vmctx; 887 vc = vs->vs_vc; 888 889 /* Save virtio queue info */ 890 for (i = 0; i < vc->vc_nvq; i++) { 891 vq = &vs->vs_queues[i]; 892 893 SNAPSHOT_VAR_CMP_OR_LEAVE(vq->vq_qsize, meta, ret, done); 894 SNAPSHOT_VAR_CMP_OR_LEAVE(vq->vq_num, meta, ret, done); 895 896 SNAPSHOT_VAR_OR_LEAVE(vq->vq_flags, meta, ret, done); 897 SNAPSHOT_VAR_OR_LEAVE(vq->vq_last_avail, meta, ret, done); 898 SNAPSHOT_VAR_OR_LEAVE(vq->vq_next_used, meta, ret, done); 899 SNAPSHOT_VAR_OR_LEAVE(vq->vq_save_used, meta, ret, done); 900 SNAPSHOT_VAR_OR_LEAVE(vq->vq_msix_idx, meta, ret, done); 901 902 SNAPSHOT_VAR_OR_LEAVE(vq->vq_pfn, meta, ret, done); 903 904 if (!vq_ring_ready(vq)) 905 continue; 906 907 addr_size = vq->vq_qsize * sizeof(struct vring_desc); 908 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(ctx, vq->vq_desc, addr_size, 909 false, meta, ret, done); 910 911 addr_size = (2 + vq->vq_qsize + 1) * sizeof(uint16_t); 912 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(ctx, vq->vq_avail, addr_size, 913 false, meta, ret, done); 914 915 addr_size = (2 + 2 * vq->vq_qsize + 1) * sizeof(uint16_t); 916 SNAPSHOT_GUEST2HOST_ADDR_OR_LEAVE(ctx, vq->vq_used, addr_size, 917 false, meta, ret, done); 918 919 SNAPSHOT_BUF_OR_LEAVE(vq->vq_desc, 920 vring_size_aligned(vq->vq_qsize), meta, ret, done); 921 } 922 923 done: 924 return (ret); 925 } 926 927 int 928 vi_pci_snapshot(struct vm_snapshot_meta *meta) 929 { 930 int ret; 931 struct pci_devinst *pi; 932 struct virtio_softc *vs; 933 struct virtio_consts *vc; 934 935 pi = meta->dev_data; 936 vs = pi->pi_arg; 937 vc = vs->vs_vc; 938 939 /* Save virtio softc */ 940 ret = vi_pci_snapshot_softc(vs, meta); 941 if (ret != 0) 942 goto done; 943 944 /* Save virtio consts */ 945 ret = vi_pci_snapshot_consts(vc, meta); 946 if (ret != 0) 947 goto done; 948 949 /* Save virtio queue info */ 950 ret = vi_pci_snapshot_queues(vs, meta); 951 if (ret != 0) 952 goto done; 953 954 /* Save device softc, if needed */ 955 if (vc->vc_snapshot != NULL) { 956 ret = (*vc->vc_snapshot)(DEV_SOFTC(vs), meta); 957 if (ret != 0) 958 goto done; 959 } 960 961 done: 962 return (ret); 963 } 964 #endif 965