1#!/bin/sh 2# 3# Copyright (c) 2002-2004 Michael Telahun Makonnen. All rights reserved. 4# 5# Redistribution and use in source and binary forms, with or without 6# modification, are permitted provided that the following conditions 7# are met: 8# 1. Redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer. 10# 2. Redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution. 13# 14# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24# 25# Email: Mike Makonnen <mtm@FreeBSD.Org> 26# 27# $FreeBSD$ 28# 29 30# err msg 31# Display $msg on stderr, unless we're being quiet. 32# 33err() { 34 if [ -z "$quietflag" ]; then 35 echo 1>&2 ${THISCMD}: ERROR: $* 36 fi 37} 38 39# info msg 40# Display $msg on stdout, unless we're being quiet. 41# 42info() { 43 if [ -z "$quietflag" ]; then 44 echo ${THISCMD}: INFO: $* 45 fi 46} 47 48# get_nextuid 49# Output the value of $_uid if it is available for use. If it 50# is not, output the value of the next higher uid that is available. 51# If a uid is not specified, output the first available uid, as indicated 52# by pw(8). 53# 54get_nextuid () { 55 _uid=$1 56 _nextuid= 57 58 if [ -z "$_uid" ]; then 59 _nextuid="`${PWCMD} usernext | cut -f1 -d:`" 60 else 61 while : ; do 62 ${PWCMD} usershow $_uid > /dev/null 2>&1 63 if [ ! "$?" -eq 0 ]; then 64 _nextuid=$_uid 65 break 66 fi 67 _uid=$(($_uid + 1)) 68 done 69 fi 70 echo $_nextuid 71} 72 73# show_usage 74# Display usage information for this utility. 75# 76show_usage() { 77 echo "usage: ${THISCMD} [options]" 78 echo " options may include:" 79 echo " -C save to the configuration file only" 80 echo " -D do not attempt to create the home directory" 81 echo " -E disable this account after creation" 82 echo " -G additional groups to add accounts to" 83 echo " -L login class of the user" 84 echo " -M file permission for home directory" 85 echo " -N do not read configuration file" 86 echo " -S a nonexistent shell is not an error" 87 echo " -d home directory" 88 echo " -f file from which input will be received" 89 echo " -g default login group" 90 echo " -h display this usage message" 91 echo " -k path to skeleton home directory" 92 echo " -m user welcome message file" 93 echo " -q absolute minimal user feedback" 94 echo " -s shell" 95 echo " -u uid to start at" 96 echo " -w password type: no, none, yes or random" 97} 98 99# valid_shells 100# Outputs a list of valid shells from /etc/shells. Only the 101# basename of the shell is output. 102# 103valid_shells() { 104 _prefix= 105 cat ${ETCSHELLS} | 106 while read _path _junk ; do 107 case $_path in 108 \#*|'') 109 ;; 110 *) 111 echo -n "${_prefix}`basename $_path`" 112 _prefix=' ' 113 ;; 114 esac 115 done 116 117 # /usr/sbin/nologin is a special case 118 [ -x "${NOLOGIN_PATH}" ] && echo -n " ${NOLOGIN}" 119} 120 121# fullpath_from_shell shell 122# Given $shell, which is either the full path to a shell or 123# the basename component of a valid shell, get the 124# full path to the shell from the /etc/shells file. 125# 126fullpath_from_shell() { 127 _shell=$1 128 [ -z "$_shell" ] && return 1 129 130 # /usr/sbin/nologin is a special case; it needs to be handled 131 # before the cat | while loop, since a 'return' from within 132 # a subshell will not terminate the function's execution, and 133 # the path to the nologin shell might be printed out twice. 134 # 135 if [ "$_shell" = "${NOLOGIN}" -o \ 136 "$_shell" = "${NOLOGIN_PATH}" ]; then 137 echo ${NOLOGIN_PATH} 138 return 0; 139 fi 140 141 cat ${ETCSHELLS} | 142 while read _path _junk ; do 143 case "$_path" in 144 \#*|'') 145 ;; 146 *) 147 if [ "$_path" = "$_shell" -o \ 148 "`basename $_path`" = "$_shell" ]; then 149 echo $_path 150 return 0 151 fi 152 ;; 153 esac 154 done 155 156 return 1 157} 158 159# shell_exists shell 160# If the given shell is listed in ${ETCSHELLS} or it is 161# the nologin shell this function will return 0. 162# Otherwise, it will return 1. If shell is valid but 163# the path is invalid or it is not executable it 164# will emit an informational message saying so. 165# 166shell_exists() { 167 _sh="$1" 168 _shellchk="${GREPCMD} '^$_sh$' ${ETCSHELLS} > /dev/null 2>&1" 169 170 if ! eval $_shellchk; then 171 # The nologin shell is not listed in /etc/shells. 172 if [ "$_sh" != "${NOLOGIN_PATH}" ]; then 173 err "Invalid shell ($_sh) for user $username." 174 return 1 175 fi 176 fi 177 ! [ -x "$_sh" ] && 178 info "The shell ($_sh) does not exist or is not executable." 179 180 return 0 181} 182 183# save_config 184# Save some variables to a configuration file. 185# Note: not all script variables are saved, only those that 186# it makes sense to save. 187# 188save_config() { 189 echo "# Configuration file for adduser(8)." > ${ADDUSERCONF} 190 echo "# NOTE: only *some* variables are saved." >> ${ADDUSERCONF} 191 echo "# Last Modified on `${DATECMD}`." >> ${ADDUSERCONF} 192 echo '' >> ${ADDUSERCONF} 193 echo "defaultHomePerm=$uhomeperm" >> ${ADDUSERCONF} 194 echo "defaultLgroup=$ulogingroup" >> ${ADDUSERCONF} 195 echo "defaultclass=$uclass" >> ${ADDUSERCONF} 196 echo "defaultgroups=$ugroups" >> ${ADDUSERCONF} 197 echo "passwdtype=$passwdtype" >> ${ADDUSERCONF} 198 echo "homeprefix=$homeprefix" >> ${ADDUSERCONF} 199 echo "defaultshell=$ushell" >> ${ADDUSERCONF} 200 echo "udotdir=$udotdir" >> ${ADDUSERCONF} 201 echo "msgfile=$msgfile" >> ${ADDUSERCONF} 202 echo "disableflag=$disableflag" >> ${ADDUSERCONF} 203 echo "uidstart=$uidstart" >> ${ADDUSERCONF} 204} 205 206# add_user 207# Add a user to the user database. If the user chose to send a welcome 208# message or lock the account, do so. 209# 210add_user() { 211 212 # Is this a configuration run? If so, don't modify user database. 213 # 214 if [ -n "$configflag" ]; then 215 save_config 216 return 217 fi 218 219 _uid= 220 _name= 221 _comment= 222 _gecos= 223 _home= 224 _group= 225 _grouplist= 226 _shell= 227 _class= 228 _dotdir= 229 _expire= 230 _pwexpire= 231 _passwd= 232 _upasswd= 233 _passwdmethod= 234 235 _name="-n '$username'" 236 [ -n "$uuid" ] && _uid='-u "$uuid"' 237 [ -n "$ulogingroup" ] && _group='-g "$ulogingroup"' 238 [ -n "$ugroups" ] && _grouplist='-G "$ugroups"' 239 [ -n "$ushell" ] && _shell='-s "$ushell"' 240 [ -n "$uclass" ] && _class='-L "$uclass"' 241 [ -n "$ugecos" ] && _comment='-c "$ugecos"' 242 [ -n "$udotdir" ] && _dotdir='-k "$udotdir"' 243 [ -n "$uexpire" ] && _expire='-e "$uexpire"' 244 [ -n "$upwexpire" ] && _pwexpire='-p "$upwexpire"' 245 if [ -z "$Dflag" -a -n "$uhome" ]; then 246 # The /nonexistent home directory is special. It 247 # means the user has no home directory. 248 if [ "$uhome" = "$NOHOME" ]; then 249 _home='-d "$uhome"' 250 else 251 # Use home directory permissions if specified 252 if [ -n "$uhomeperm" ]; then 253 _home='-m -d "$uhome" -M "$uhomeperm"' 254 else 255 _home='-m -d "$uhome"' 256 fi 257 fi 258 elif [ -n "$Dflag" -a -n "$uhome" ]; then 259 _home='-d "$uhome"' 260 fi 261 case $passwdtype in 262 no) 263 _passwdmethod="-w no" 264 _passwd="-h -" 265 ;; 266 yes) 267 # Note on processing the password: The outer double quotes 268 # make literal everything except ` and \ and $. 269 # The outer single quotes make literal ` and $. 270 # We can ensure the \ isn't treated specially by specifying 271 # the -r switch to the read command used to obtain the input. 272 # 273 _passwdmethod="-w yes" 274 _passwd="-h 0" 275 _upasswd='echo "$upass" |' 276 ;; 277 none) 278 _passwdmethod="-w none" 279 ;; 280 random) 281 _passwdmethod="-w random" 282 ;; 283 esac 284 285 _pwcmd="$_upasswd ${PWCMD} useradd $_uid $_name $_group $_grouplist $_comment" 286 _pwcmd="$_pwcmd $_shell $_class $_home $_dotdir $_passwdmethod $_passwd" 287 _pwcmd="$_pwcmd $_expire $_pwexpire" 288 289 if ! _output=`eval $_pwcmd` ; then 290 err "There was an error adding user ($username)." 291 return 1 292 else 293 info "Successfully added ($username) to the user database." 294 if [ "random" = "$passwdtype" ]; then 295 randompass="$_output" 296 info "Password for ($username) is: $randompass" 297 fi 298 fi 299 300 if [ -n "$disableflag" ]; then 301 if ${PWCMD} lock $username ; then 302 info "Account ($username) is locked." 303 else 304 info "Account ($username) could NOT be locked." 305 fi 306 fi 307 308 _line= 309 _owner= 310 _perms= 311 if [ -n "$msgflag" ]; then 312 [ -r "$msgfile" ] && { 313 # We're evaluating the contents of an external file. 314 # Let's not open ourselves up for attack. _perms will 315 # be empty if it's writeable only by the owner. _owner 316 # will *NOT* be empty if the file is owned by root. 317 # 318 _dir="`dirname $msgfile`" 319 _file="`basename $msgfile`" 320 _perms=`/usr/bin/find $_dir -name $_file -perm +07022 -prune` 321 _owner=`/usr/bin/find $_dir -name $_file -user 0 -prune` 322 if [ -z "$_owner" -o -n "$_perms" ]; then 323 err "The message file ($msgfile) may be writeable only by root." 324 return 1 325 fi 326 cat "$msgfile" | 327 while read _line ; do 328 eval echo "$_line" 329 done | ${MAILCMD} -s"Welcome" ${username} 330 info "Sent welcome message to ($username)." 331 } 332 fi 333} 334 335# get_user 336# Reads username of the account from standard input or from a global 337# variable containing an account line from a file. The username is 338# required. If this is an interactive session it will prompt in 339# a loop until a username is entered. If it is batch processing from 340# a file it will output an error message and return to the caller. 341# 342get_user() { 343 _input= 344 345 # No need to take down user names if this is a configuration saving run. 346 [ -n "$configflag" ] && return 347 348 while : ; do 349 if [ -z "$fflag" ]; then 350 echo -n "Username: " 351 read _input 352 else 353 _input="`echo "$fileline" | cut -f1 -d:`" 354 fi 355 356 # There *must* be a username, and it must not exist. If 357 # this is an interactive session give the user an 358 # opportunity to retry. 359 # 360 if [ -z "$_input" ]; then 361 err "You must enter a username!" 362 [ -z "$fflag" ] && continue 363 fi 364 ${PWCMD} usershow $_input > /dev/null 2>&1 365 if [ "$?" -eq 0 ]; then 366 err "User exists!" 367 [ -z "$fflag" ] && continue 368 fi 369 break 370 done 371 username="$_input" 372} 373 374# get_gecos 375# Reads extra information about the user. Can be used both in interactive 376# and batch (from file) mode. 377# 378get_gecos() { 379 _input= 380 381 # No need to take down additional user information for a configuration run. 382 [ -n "$configflag" ] && return 383 384 if [ -z "$fflag" ]; then 385 echo -n "Full name: " 386 read _input 387 else 388 _input="`echo "$fileline" | cut -f7 -d:`" 389 fi 390 ugecos="$_input" 391} 392 393# get_shell 394# Get the account's shell. Works in interactive and batch mode. It 395# accepts either the base name of the shell or the full path. 396# If an invalid shell is entered it will simply use the default shell. 397# 398get_shell() { 399 _input= 400 _fullpath= 401 ushell="$defaultshell" 402 403 # Make sure the current value of the shell is a valid one 404 if [ -z "$Sflag" ]; then 405 if ! shell_exists $ushell ; then 406 info "Using default shell ${defaultshell}." 407 ushell="$defaultshell" 408 fi 409 fi 410 411 if [ -z "$fflag" ]; then 412 echo -n "Shell ($shells) [`basename $ushell`]: " 413 read _input 414 else 415 _input="`echo "$fileline" | cut -f9 -d:`" 416 fi 417 if [ -n "$_input" ]; then 418 if [ -n "$Sflag" ]; then 419 ushell="$_input" 420 else 421 _fullpath=`fullpath_from_shell $_input` 422 if [ -n "$_fullpath" ]; then 423 ushell="$_fullpath" 424 else 425 err "Invalid shell ($_input) for user $username." 426 info "Using default shell ${defaultshell}." 427 ushell="$defaultshell" 428 fi 429 fi 430 fi 431} 432 433# get_homedir 434# Reads the account's home directory. Used both with interactive input 435# and batch input. 436# 437get_homedir() { 438 _input= 439 if [ -z "$fflag" ]; then 440 echo -n "Home directory [${homeprefix}/${username}]: " 441 read _input 442 else 443 _input="`echo "$fileline" | cut -f8 -d:`" 444 fi 445 446 if [ -n "$_input" ]; then 447 uhome="$_input" 448 # if this is a configuration run, then user input is the home 449 # directory prefix. Otherwise it is understood to 450 # be $prefix/$user 451 # 452 [ -z "$configflag" ] && homeprefix="`dirname $uhome`" || homeprefix="$uhome" 453 else 454 uhome="${homeprefix}/${username}" 455 fi 456} 457 458# get_homeperm 459# Reads the account's home directory permissions. 460# 461get_homeperm() { 462 uhomeperm=$defaultHomePerm 463 _input= 464 _prompt= 465 466 if [ -n "$uhomeperm" ]; then 467 _prompt="Home directory permissions [${uhomeperm}]: " 468 else 469 _prompt="Home directory permissions (Leave empty for default): " 470 fi 471 if [ -z "$fflag" ]; then 472 echo -n "$_prompt" 473 read _input 474 fi 475 476 if [ -n "$_input" ]; then 477 uhomeperm="$_input" 478 fi 479} 480 481# get_uid 482# Reads a numeric userid in an interactive or batch session. Automatically 483# allocates one if it is not specified. 484# 485get_uid() { 486 uuid=${uidstart} 487 _input= 488 _prompt= 489 490 if [ -n "$uuid" ]; then 491 _prompt="Uid [$uuid]: " 492 else 493 _prompt="Uid (Leave empty for default): " 494 fi 495 if [ -z "$fflag" ]; then 496 echo -n "$_prompt" 497 read _input 498 else 499 _input="`echo "$fileline" | cut -f2 -d:`" 500 fi 501 502 [ -n "$_input" ] && uuid=$_input 503 uuid=`get_nextuid $uuid` 504 uidstart=$uuid 505} 506 507# get_class 508# Reads login class of account. Can be used in interactive or batch mode. 509# 510get_class() { 511 uclass="$defaultclass" 512 _input= 513 _class=${uclass:-"default"} 514 515 if [ -z "$fflag" ]; then 516 echo -n "Login class [$_class]: " 517 read _input 518 else 519 _input="`echo "$fileline" | cut -f4 -d:`" 520 fi 521 522 [ -n "$_input" ] && uclass="$_input" 523} 524 525# get_logingroup 526# Reads user's login group. Can be used in both interactive and batch 527# modes. The specified value can be a group name or its numeric id. 528# This routine leaves the field blank if nothing is provided and 529# a default login group has not been set. The pw(8) command 530# will then provide a login group with the same name as the username. 531# 532get_logingroup() { 533 ulogingroup="$defaultLgroup" 534 _input= 535 536 if [ -z "$fflag" ]; then 537 echo -n "Login group [${ulogingroup:-$username}]: " 538 read _input 539 else 540 _input="`echo "$fileline" | cut -f3 -d:`" 541 fi 542 543 # Pw(8) will use the username as login group if it's left empty 544 [ -n "$_input" ] && ulogingroup="$_input" 545} 546 547# get_groups 548# Read additional groups for the user. It can be used in both interactive 549# and batch modes. 550# 551get_groups() { 552 ugroups="$defaultgroups" 553 _input= 554 _group=${ulogingroup:-"${username}"} 555 556 if [ -z "$configflag" ]; then 557 [ -z "$fflag" ] && echo -n "Login group is $_group. Invite $username" 558 [ -z "$fflag" ] && echo -n " into other groups? [$ugroups]: " 559 else 560 [ -z "$fflag" ] && echo -n "Enter additional groups [$ugroups]: " 561 fi 562 read _input 563 564 [ -n "$_input" ] && ugroups="$_input" 565} 566 567# get_expire_dates 568# Read expiry information for the account and also for the password. This 569# routine is used only from batch processing mode. 570# 571get_expire_dates() { 572 upwexpire="`echo "$fileline" | cut -f5 -d:`" 573 uexpire="`echo "$fileline" | cut -f6 -d:`" 574} 575 576# get_password 577# Read the password in batch processing mode. The password field matters 578# only when the password type is "yes" or "random". If the field is empty and the 579# password type is "yes", then it assumes the account has an empty passsword 580# and changes the password type accordingly. If the password type is "random" 581# and the password field is NOT empty, then it assumes the account will NOT 582# have a random password and set passwdtype to "yes." 583# 584get_password() { 585 # We may temporarily change a password type. Make sure it's changed 586 # back to whatever it was before we process the next account. 587 # 588 [ -n "$savedpwtype" ] && { 589 passwdtype=$savedpwtype 590 savedpwtype= 591 } 592 593 # There may be a ':' in the password 594 upass=${fileline#*:*:*:*:*:*:*:*:*:} 595 596 if [ -z "$upass" ]; then 597 case $passwdtype in 598 yes) 599 # if it's empty, assume an empty password 600 passwdtype=none 601 savedpwtype=yes 602 ;; 603 esac 604 else 605 case $passwdtype in 606 random) 607 passwdtype=yes 608 savedpwtype=random 609 ;; 610 esac 611 fi 612} 613 614# input_from_file 615# Reads a line of account information from standard input and 616# adds it to the user database. 617# 618input_from_file() { 619 _field= 620 621 while read -r fileline ; do 622 case "$fileline" in 623 \#*|'') 624 ;; 625 *) 626 get_user || continue 627 get_gecos 628 get_uid 629 get_logingroup 630 get_class 631 get_shell 632 get_homedir 633 get_homeperm 634 get_password 635 get_expire_dates 636 ugroups="$defaultgroups" 637 638 add_user 639 ;; 640 esac 641 done 642} 643 644# input_interactive 645# Prompts for user information interactively, and commits to 646# the user database. 647# 648input_interactive() { 649 _disable= 650 _pass= 651 _passconfirm= 652 _random="no" 653 _emptypass="no" 654 _usepass="yes" 655 _logingroup_ok="no" 656 _groups_ok="no" 657 case $passwdtype in 658 none) 659 _emptypass="yes" 660 _usepass="yes" 661 ;; 662 no) 663 _usepass="no" 664 ;; 665 random) 666 _random="yes" 667 ;; 668 esac 669 670 get_user 671 get_gecos 672 get_uid 673 674 # The case where group = user is handled elsewhere, so 675 # validate any other groups the user is invited to. 676 until [ "$_logingroup_ok" = yes ]; do 677 get_logingroup 678 _logingroup_ok=yes 679 if [ -n "$ulogingroup" -a "$username" != "$ulogingroup" ]; then 680 if ! ${PWCMD} show group $ulogingroup > /dev/null 2>&1; then 681 echo "Group $ulogingroup does not exist!" 682 _logingroup_ok=no 683 fi 684 fi 685 done 686 until [ "$_groups_ok" = yes ]; do 687 get_groups 688 _groups_ok=yes 689 for i in $ugroups; do 690 if [ "$username" != "$i" ]; then 691 if ! ${PWCMD} show group $i > /dev/null 2>&1; then 692 echo "Group $i does not exist!" 693 _groups_ok=no 694 fi 695 fi 696 done 697 done 698 699 get_class 700 get_shell 701 get_homedir 702 get_homeperm 703 704 while : ; do 705 echo -n "Use password-based authentication? [$_usepass]: " 706 read _input 707 [ -z "$_input" ] && _input=$_usepass 708 case $_input in 709 [Nn][Oo]|[Nn]) 710 passwdtype="no" 711 ;; 712 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 713 while : ; do 714 echo -n "Use an empty password? (yes/no) [$_emptypass]: " 715 read _input 716 [ -n "$_input" ] && _emptypass=$_input 717 case $_emptypass in 718 [Nn][Oo]|[Nn]) 719 echo -n "Use a random password? (yes/no) [$_random]: " 720 read _input 721 [ -n "$_input" ] && _random="$_input" 722 case $_random in 723 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 724 passwdtype="random" 725 break 726 ;; 727 esac 728 passwdtype="yes" 729 [ -n "$configflag" ] && break 730 trap 'stty echo; exit' 0 1 2 3 15 731 stty -echo 732 echo -n "Enter password: " 733 read -r upass 734 echo'' 735 echo -n "Enter password again: " 736 read -r _passconfirm 737 echo '' 738 stty echo 739 # if user entered a blank password 740 # explicitly ask again. 741 [ -z "$upass" -a -z "$_passconfirm" ] \ 742 && continue 743 ;; 744 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 745 passwdtype="none" 746 break; 747 ;; 748 *) 749 # invalid answer; repeat the loop 750 continue 751 ;; 752 esac 753 if [ "$upass" != "$_passconfirm" ]; then 754 echo "Passwords did not match!" 755 continue 756 fi 757 break 758 done 759 ;; 760 *) 761 # invalid answer; repeat loop 762 continue 763 ;; 764 esac 765 break; 766 done 767 _disable=${disableflag:-"no"} 768 while : ; do 769 echo -n "Lock out the account after creation? [$_disable]: " 770 read _input 771 [ -z "$_input" ] && _input=$_disable 772 case $_input in 773 [Nn][Oo]|[Nn]) 774 disableflag= 775 ;; 776 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 777 disableflag=yes 778 ;; 779 *) 780 # invalid answer; repeat loop 781 continue 782 ;; 783 esac 784 break 785 done 786 787 # Display the information we have so far and prompt to 788 # commit it. 789 # 790 _disable=${disableflag:-"no"} 791 [ -z "$configflag" ] && printf "%-10s : %s\n" Username $username 792 case $passwdtype in 793 yes) 794 _pass='*****' 795 ;; 796 no) 797 _pass='<disabled>' 798 ;; 799 none) 800 _pass='<blank>' 801 ;; 802 random) 803 _pass='<random>' 804 ;; 805 esac 806 [ -z "$configflag" ] && printf "%-10s : %s\n" "Password" "$_pass" 807 [ -n "$configflag" ] && printf "%-10s : %s\n" "Pass Type" "$passwdtype" 808 [ -z "$configflag" ] && printf "%-10s : %s\n" "Full Name" "$ugecos" 809 [ -z "$configflag" ] && printf "%-10s : %s\n" "Uid" "$uuid" 810 printf "%-10s : %s\n" "Class" "$uclass" 811 printf "%-10s : %s %s\n" "Groups" "${ulogingroup:-$username}" "$ugroups" 812 printf "%-10s : %s\n" "Home" "$uhome" 813 printf "%-10s : %s\n" "Home Mode" "$uhomeperm" 814 printf "%-10s : %s\n" "Shell" "$ushell" 815 printf "%-10s : %s\n" "Locked" "$_disable" 816 while : ; do 817 echo -n "OK? (yes/no): " 818 read _input 819 case $_input in 820 [Nn][Oo]|[Nn]) 821 return 1 822 ;; 823 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 824 add_user 825 ;; 826 *) 827 continue 828 ;; 829 esac 830 break 831 done 832 return 0 833} 834 835#### END SUBROUTINE DEFINITION #### 836 837THISCMD=`/usr/bin/basename $0` 838DEFAULTSHELL=/bin/sh 839ADDUSERCONF="${ADDUSERCONF:-/etc/adduser.conf}" 840PWCMD="${PWCMD:-/usr/sbin/pw}" 841MAILCMD="${MAILCMD:-mail}" 842ETCSHELLS="${ETCSHELLS:-/etc/shells}" 843NOHOME="/nonexistent" 844NOLOGIN="nologin" 845NOLOGIN_PATH="/usr/sbin/nologin" 846GREPCMD="/usr/bin/grep" 847DATECMD="/bin/date" 848 849# Set default values 850# 851username= 852uuid= 853uidstart= 854ugecos= 855ulogingroup= 856uclass= 857uhome= 858uhomeperm= 859upass= 860ushell= 861udotdir=/usr/share/skel 862ugroups= 863uexpire= 864upwexpire= 865shells="`valid_shells`" 866passwdtype="yes" 867msgfile=/etc/adduser.msg 868msgflag= 869quietflag= 870configflag= 871fflag= 872infile= 873disableflag= 874Dflag= 875Sflag= 876readconfig="yes" 877homeprefix="/home" 878randompass= 879fileline= 880savedpwtype= 881defaultclass= 882defaultLgroup= 883defaultgroups= 884defaultshell="${DEFAULTSHELL}" 885defaultHomePerm= 886 887# Make sure the user running this program is root. This isn't a security 888# measure as much as it is a useful method of reminding the user to 889# 'su -' before he/she wastes time entering data that won't be saved. 890# 891procowner=${procowner:-`/usr/bin/id -u`} 892if [ "$procowner" != "0" ]; then 893 err 'you must be the super-user (uid 0) to use this utility.' 894 exit 1 895fi 896 897# Overide from our conf file 898# Quickly go through the commandline line to see if we should read 899# from our configuration file. The actual parsing of the commandline 900# arguments happens after we read in our configuration file (commandline 901# should override configuration file). 902# 903for _i in $* ; do 904 if [ "$_i" = "-N" ]; then 905 readconfig= 906 break; 907 fi 908done 909if [ -n "$readconfig" ]; then 910 # On a long-lived system, the first time this script is run it 911 # will barf upon reading the configuration file for its perl predecessor. 912 if ( . ${ADDUSERCONF} > /dev/null 2>&1 ); then 913 [ -r ${ADDUSERCONF} ] && . ${ADDUSERCONF} > /dev/null 2>&1 914 fi 915fi 916 917# Proccess command-line options 918# 919for _switch ; do 920 case $_switch in 921 -L) 922 defaultclass="$2" 923 shift; shift 924 ;; 925 -C) 926 configflag=yes 927 shift 928 ;; 929 -D) 930 Dflag=yes 931 shift 932 ;; 933 -E) 934 disableflag=yes 935 shift 936 ;; 937 -k) 938 udotdir="$2" 939 shift; shift 940 ;; 941 -f) 942 [ "$2" != "-" ] && infile="$2" 943 fflag=yes 944 shift; shift 945 ;; 946 -g) 947 defaultLgroup="$2" 948 shift; shift 949 ;; 950 -G) 951 defaultgroups="$2" 952 shift; shift 953 ;; 954 -h) 955 show_usage 956 exit 0 957 ;; 958 -d) 959 homeprefix="$2" 960 shift; shift 961 ;; 962 -m) 963 case "$2" in 964 [Nn][Oo]) 965 msgflag= 966 ;; 967 *) 968 msgflag=yes 969 msgfile="$2" 970 ;; 971 esac 972 shift; shift 973 ;; 974 -M) 975 defaultHomePerm=$2 976 shift; shift 977 ;; 978 -N) 979 readconfig= 980 shift 981 ;; 982 -w) 983 case "$2" in 984 no|none|random|yes) 985 passwdtype=$2 986 ;; 987 *) 988 show_usage 989 exit 1 990 ;; 991 esac 992 shift; shift 993 ;; 994 -q) 995 quietflag=yes 996 shift 997 ;; 998 -s) 999 defaultshell="`fullpath_from_shell $2`" 1000 shift; shift 1001 ;; 1002 -S) 1003 Sflag=yes 1004 shift 1005 ;; 1006 -u) 1007 uidstart=$2 1008 shift; shift 1009 ;; 1010 esac 1011done 1012 1013# If the -f switch was used, get input from a file. Otherwise, 1014# this is an interactive session. 1015# 1016if [ -n "$fflag" ]; then 1017 if [ -z "$infile" ]; then 1018 input_from_file 1019 elif [ -n "$infile" ]; then 1020 if [ -r "$infile" ]; then 1021 input_from_file < $infile 1022 else 1023 err "File ($infile) is unreadable or does not exist." 1024 fi 1025 fi 1026else 1027 input_interactive 1028 while : ; do 1029 if [ -z "$configflag" ]; then 1030 echo -n "Add another user? (yes/no): " 1031 else 1032 echo -n "Re-edit the default configuration? (yes/no): " 1033 fi 1034 read _input 1035 case $_input in 1036 [Yy][Ee][Ss]|[Yy][Ee]|[Yy]) 1037 uidstart=`get_nextuid $uidstart` 1038 input_interactive 1039 continue 1040 ;; 1041 [Nn][Oo]|[Nn]) 1042 echo "Goodbye!" 1043 ;; 1044 *) 1045 continue 1046 ;; 1047 esac 1048 break 1049 done 1050fi 1051