xref: /freebsd/usr.bin/usbhidaction/usbhidaction.1 (revision ffc07c4cf2ca53a1a234a334624c34735efd6b7e)

.\" $FreeBSD$
.\" $NetBSD: usbhidaction.1,v 1.8 2003/02/25 10:35:59 wiz Exp $
.\"
.\" Copyright (c) 2000 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Lennart Augustsson (lennart@augustsson.net).
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"        This product includes software developed by the NetBSD
.\"        Foundation, Inc. and its contributors.
.\" 4. Neither the name of The NetBSD Foundation nor the names of its
.\"    contributors may be used to endorse or promote products derived
.\"    from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd April 9, 2003
.Dt USBHIDACTION 1
.Os
.Sh NAME
.Nm usbhidaction
.Nd perform actions according to USB HID controls
.Sh SYNOPSIS
.Nm
.Op Fl diev
.Fl c Ar config-file
.Fl f Ar device
.Op Fl p Ar pidfile
.Ar arg ...
.Sh DESCRIPTION
The
.Nm
utility
can be used to execute commands when certain values appear on HID controls.
The normal operation for this program is to read the configuration file
and then become a daemon and execute commands as the HID items specify.
If a read from the HID device fails, the program dies; this will make it
die when the USB device is unplugged.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl d
Toggle the daemon flag.
.It Fl e
Instruct
.Nm
to die early.
Useful when specified with multiple verbose options to see how files are parsed.
.It Fl i
Ignore HID items in the configuration file that do not exist in the device.
.It Fl v
Be verbose, and do not become a daemon.
.It Fl c Ar config-file
Specify a path name for the configuration file.
.It Fl f Ar device
Specify a path name for the device to operate on.
If
.Ar device
is numeric, it is taken to be the USB HID device number.
If it is a relative
path, it is taken to be the name of the device under
.Pa /dev .
An absolute path is taken to be the literal device pathname.
.It Fl p Ar pidfile
Specify an alternate file in which to store the process ID.
.El
.Pp
The configuration file will be re-read if the process gets a
.Dv SIGHUP
signal.
.Sh CONFIGURATION
The configuration file has a very simple format.
Each line describes an
action; if a line begins with a whitespace, it is considered a continuation
of the previous line.
Lines beginning with
.Ql #
are considered as comments.
.Pp
Each line has four parts: a name of a USB HID item, a value for that item,
a debounce value, and an action.
There must be whitespace between the parts.
.Pp
The item names are similar to those used by
.Xr usbhidctl 1 ,
but each part must be prefixed by its page name.
.Pp
The value is simply a numeric value.
When the item reports this value,
the action will be performed.
If the value is
.Ql * ,
it will match any value.
.Pp
The debounce value is an integer not less than 0.
The value of 0 indicates that no debouncing should occur.
A value of 1 will only execute the action when the state changes.
Values greater than one specify that an action should be performed
only when the value changes by that amount.
.Pp
The action is a normal command that is executed with
.Xr system 3 .
Before it is executed some substitution will occur:
.Ql $n
will be replaced by the
.Ar n Ns th
argument on the command line,
.Ql $V
will be replaced by the numeric value of the HID item,
.Ql $N
will be replaced by the name of the control, and
.Ql $H
will be replaced by the name of the HID device.
.Sh FILES
.Bl -tag -width ".Pa /usr/share/misc/usb_hid_usages"
.It Pa /usr/share/misc/usb_hid_usages
The HID usage table.
.It Pa /var/run/usbaction.pid
The default location of the PID file.
.El
.Sh EXAMPLES
The following configuration file can be used to control a pair
of Philips USB speakers with the HID controls on the speakers.
.Bd -literal -offset indent
# Configuration for various Philips USB speakers
Consumer:Volume_Up			 1 0 mixer -f $1 vol +1
Consumer:Volume_Down			 1 0 mixer -f $1 vol -1
# mute not supported
#Consumer:Mute				 1 0 mixer -f $1 mute
Consumer:Channel_Top.Microsoft:Base_Up	 1 0 mixer -f $1 bass +1
Consumer:Channel_Top.Microsoft:Base_Down 1 0 mixer -f $1 bass -1
.Ed
.Pp
A sample invocation using this configuration would be
.Pp
.Dl "usbhidaction -f /dev/uhid1 -c conf /dev/mixer1"
.Pp
The following example controls the mixer volume using a Logitech Wingman.
Notice the debounce of 1 for buttons and 5 for the slider.
.Bd -literal -offset indent
Button:Button_1	  1 1	mixer vol +10
Button:Button_2	  1 1	mixer vol -10
Generic_Desktop:Z * 5	mixer vol `echo $V | awk '{print int($$1/255*100)}'`
.Ed
.Sh SEE ALSO
.Xr usbhidctl 1 ,
.Xr usbhid 3 ,
.Xr uhid 4 ,
.Xr usb 4
.Sh HISTORY
The
.Nm
command first appeared in
.Nx 1.6 .
The
.Nm
command appeared in
.Fx 5.1 .