xref: /freebsd/usr.bin/tip/libacu/t3000.c (revision fd45b686f9d92f583366c75b22c04c7ee49709c0)
1 /*	$OpenBSD: t3000.c,v 1.14 2006/03/17 19:17:13 moritz Exp $	*/
2 /*	$NetBSD: t3000.c,v 1.5 1997/02/11 09:24:18 mrg Exp $	*/
3 
4 /*-
5  * SPDX-License-Identifier: BSD-3-Clause
6  *
7  * Copyright (c) 1992, 1993
8  *	The Regents of the University of California.  All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  */
34 
35 /*
36  * Routines for calling up on a Telebit T3000 modem.
37  * Derived from Courier driver.
38  */
39 #include "tip.h"
40 
41 #include <sys/ioctl.h>
42 #include <stdio.h>
43 
44 #define	MAXRETRY	5
45 
46 static	int dialtimeout = 0;
47 static	int connected = 0;
48 static	jmp_buf timeoutbuf;
49 
50 static void	sigALRM(int);
51 static int	t3000_swallow(char *);
52 static int	t3000_connect(void);
53 static int	t3000_sync(void);
54 static void	t3000_write(int, char *, int);
55 static void	t3000_nap(void);
56 #ifdef DEBUG
57 static void	t3000_verbose_read(void);
58 #endif
59 
60 int
61 t3000_dialer(char *num, char *acu)
62 {
63 	char *cp;
64 	struct termios cntrl;
65 #ifdef ACULOG
66 	char line[80];
67 #endif
68 
69 	if (boolean(value(VERBOSE)))
70 		printf("Using \"%s\"\n", acu);
71 
72 	tcgetattr(FD, &cntrl);
73 	cntrl.c_cflag |= HUPCL;
74 	tcsetattr(FD, TCSANOW, &cntrl);
75 	/*
76 	 * Get in synch.
77 	 */
78 	if (!t3000_sync()) {
79 badsynch:
80 		printf("can't synchronize with t3000\n");
81 #ifdef ACULOG
82 		logent(value(HOST), num, "t3000", "can't synch up");
83 #endif
84 		return (0);
85 	}
86 	t3000_write(FD, "AT E0\r", 6);	/* turn off echoing */
87 	sleep(1);
88 #ifdef DEBUG
89 	if (boolean(value(VERBOSE)))
90 		t3000_verbose_read();
91 #endif
92 	tcflush(FD, TCIOFLUSH);
93 	t3000_write(FD, "AT E0 H0 Q0 X4 V1\r", 18);
94 	if (!t3000_swallow("\r\nOK\r\n"))
95 		goto badsynch;
96 	fflush(stdout);
97 	t3000_write(FD, "AT D", 4);
98 	for (cp = num; *cp; cp++)
99 		if (*cp == '=')
100 			*cp = ',';
101 	t3000_write(FD, num, strlen(num));
102 	t3000_write(FD, "\r", 1);
103 	connected = t3000_connect();
104 #ifdef ACULOG
105 	if (dialtimeout) {
106 		(void)snprintf(line, sizeof line, "%ld second dial timeout",
107 			number(value(DIALTIMEOUT)));
108 		logent(value(HOST), num, "t3000", line);
109 	}
110 #endif
111 	if (dialtimeout)
112 		t3000_disconnect();
113 	return (connected);
114 }
115 
116 void
117 t3000_disconnect(void)
118 {
119 	 /* first hang up the modem*/
120 	ioctl(FD, TIOCCDTR, 0);
121 	sleep(1);
122 	ioctl(FD, TIOCSDTR, 0);
123 	t3000_sync();				/* reset */
124 	close(FD);
125 }
126 
127 void
128 t3000_abort(void)
129 {
130 	t3000_write(FD, "\r", 1);	/* send anything to abort the call */
131 	t3000_disconnect();
132 }
133 
134 /*ARGSUSED*/
135 static void
136 sigALRM(int signo)
137 {
138 	printf("\07timeout waiting for reply\n");
139 	dialtimeout = 1;
140 	longjmp(timeoutbuf, 1);
141 }
142 
143 static int
144 t3000_swallow(char *match)
145 {
146 	sig_t f;
147 	char c;
148 
149 	f = signal(SIGALRM, sigALRM);
150 	dialtimeout = 0;
151 	do {
152 		if (*match =='\0') {
153 			signal(SIGALRM, f);
154 			return (1);
155 		}
156 		if (setjmp(timeoutbuf)) {
157 			signal(SIGALRM, f);
158 			return (0);
159 		}
160 		alarm(number(value(DIALTIMEOUT)));
161 		read(FD, &c, 1);
162 		alarm(0);
163 		c &= 0177;
164 #ifdef DEBUG
165 		if (boolean(value(VERBOSE)))
166 			putchar(c);
167 #endif
168 	} while (c == *match++);
169 #ifdef DEBUG
170 	if (boolean(value(VERBOSE)))
171 		fflush(stdout);
172 #endif
173 	signal(SIGALRM, SIG_DFL);
174 	return (0);
175 }
176 
177 #ifndef B19200		/* XXX */
178 #define	B19200	EXTA
179 #define	B38400	EXTB
180 #endif
181 
182 struct tbaud_msg {
183 	char *msg;
184 	int baud;
185 	int baud2;
186 } tbaud_msg[] = {
187 	{ "",		B300,	0 },
188 	{ " 1200",	B1200,	0 },
189 	{ " 2400",	B2400,	0 },
190 	{ " 4800",	B4800,	0 },
191 	{ " 9600",	B9600,	0 },
192 	{ " 14400",	B19200,	B9600 },
193 	{ " 19200",	B19200,	B9600 },
194 	{ " 38400",	B38400,	B9600 },
195 	{ " 57600",	B38400,	B9600 },
196 	{ " 7512",	B9600,	0 },
197 	{ " 1275",	B2400,	0 },
198 	{ " 7200",	B9600,	0 },
199 	{ " 12000",	B19200,	B9600 },
200 	{ 0,		0,	0 },
201 };
202 
203 static int
204 t3000_connect(void)
205 {
206 	char c;
207 	int nc, nl, n;
208 	char dialer_buf[64];
209 	struct tbaud_msg *bm;
210 	sig_t f;
211 
212 	if (t3000_swallow("\r\n") == 0)
213 		return (0);
214 	f = signal(SIGALRM, sigALRM);
215 again:
216 	nc = 0; nl = sizeof(dialer_buf)-1;
217 	bzero(dialer_buf, sizeof(dialer_buf));
218 	dialtimeout = 0;
219 	for (nc = 0, nl = sizeof(dialer_buf)-1 ; nl > 0 ; nc++, nl--) {
220 		if (setjmp(timeoutbuf))
221 			break;
222 		alarm(number(value(DIALTIMEOUT)));
223 		n = read(FD, &c, 1);
224 		alarm(0);
225 		if (n <= 0)
226 			break;
227 		c &= 0x7f;
228 		if (c == '\r') {
229 			if (t3000_swallow("\n") == 0)
230 				break;
231 			if (!dialer_buf[0])
232 				goto again;
233 			if (strcmp(dialer_buf, "RINGING") == 0 &&
234 			    boolean(value(VERBOSE))) {
235 #ifdef DEBUG
236 				printf("%s\r\n", dialer_buf);
237 #endif
238 				goto again;
239 			}
240 			if (strncmp(dialer_buf, "CONNECT",
241 				    sizeof("CONNECT")-1) != 0)
242 				break;
243 			for (bm = tbaud_msg ; bm->msg ; bm++)
244 				if (strcmp(bm->msg,
245 				    dialer_buf+sizeof("CONNECT")-1) == 0) {
246 					struct termios	cntrl;
247 
248 					tcgetattr(FD, &cntrl);
249 					cfsetospeed(&cntrl, bm->baud);
250 					cfsetispeed(&cntrl, bm->baud);
251 					tcsetattr(FD, TCSAFLUSH, &cntrl);
252 					signal(SIGALRM, f);
253 #ifdef DEBUG
254 					if (boolean(value(VERBOSE)))
255 						printf("%s\r\n", dialer_buf);
256 #endif
257 					return (1);
258 				}
259 			break;
260 		}
261 		dialer_buf[nc] = c;
262 #ifdef notdef
263 		if (boolean(value(VERBOSE)))
264 			putchar(c);
265 #endif
266 	}
267 	printf("%s\r\n", dialer_buf);
268 	signal(SIGALRM, f);
269 	return (0);
270 }
271 
272 /*
273  * This convoluted piece of code attempts to get
274  * the t3000 in sync.
275  */
276 static int
277 t3000_sync(void)
278 {
279 	int already = 0;
280 	int len;
281 	char buf[40];
282 
283 	while (already++ < MAXRETRY) {
284 		tcflush(FD, TCIOFLUSH);
285 		t3000_write(FD, "\rAT Z\r", 6);	/* reset modem */
286 		bzero(buf, sizeof(buf));
287 		sleep(2);
288 		ioctl(FD, FIONREAD, &len);
289 #if 1
290 if (len == 0) len = 1;
291 #endif
292 		if (len) {
293 			len = read(FD, buf, sizeof(buf));
294 #ifdef DEBUG
295 			buf[len] = '\0';
296 			printf("t3000_sync: (\"%s\")\n\r", buf);
297 #endif
298 			if (strchr(buf, '0') ||
299 		   	   (strchr(buf, 'O') && strchr(buf, 'K')))
300 				return(1);
301 		}
302 		/*
303 		 * If not strapped for DTR control,
304 		 * try to get command mode.
305 		 */
306 		sleep(1);
307 		t3000_write(FD, "+++", 3);
308 		sleep(1);
309 		/*
310 		 * Toggle DTR to force anyone off that might have left
311 		 * the modem connected.
312 		 */
313 		ioctl(FD, TIOCCDTR, 0);
314 		sleep(1);
315 		ioctl(FD, TIOCSDTR, 0);
316 	}
317 	t3000_write(FD, "\rAT Z\r", 6);
318 	return (0);
319 }
320 
321 static void
322 t3000_write(int fd, char *cp, int n)
323 {
324 #ifdef notdef
325 	if (boolean(value(VERBOSE)))
326 		write(1, cp, n);
327 #endif
328 	tcdrain(fd);
329 	t3000_nap();
330 	for ( ; n-- ; cp++) {
331 		write(fd, cp, 1);
332 		tcdrain(fd);
333 		t3000_nap();
334 	}
335 }
336 
337 #ifdef DEBUG
338 static void
339 t3000_verbose_read(void)
340 {
341 	int n = 0;
342 	char buf[BUFSIZ];
343 
344 	if (ioctl(FD, FIONREAD, &n) < 0)
345 		return;
346 	if (n <= 0)
347 		return;
348 	if (read(FD, buf, n) != n)
349 		return;
350 	write(1, buf, n);
351 }
352 #endif
353 
354 /* Give the t3000 50 milliseconds between characters */
355 static void
356 t3000_nap(void)
357 {
358 	struct timespec ts;
359 
360 	ts.tv_sec = 0;
361 	ts.tv_nsec = 50 * 1000000;
362 
363 	nanosleep(&ts, NULL);
364 }
365