xref: /freebsd/usr.bin/tip/libacu/biz31.c (revision 4e462178745853ecc014c13f82f89cfe39b83e9c)
1 /*	$OpenBSD: biz31.c,v 1.10 2006/03/17 19:17:13 moritz Exp $	*/
2 /*	$NetBSD: biz31.c,v 1.5 1997/02/11 09:24:14 mrg Exp $	*/
3 
4 /*-
5  * SPDX-License-Identifier: BSD-3-Clause
6  *
7  * Copyright (c) 1983, 1993
8  *	The Regents of the University of California.  All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  */
34 
35 #include <sys/cdefs.h>
36 __FBSDID("$FreeBSD$");
37 
38 #ifndef lint
39 #if 0
40 static char sccsid[] = "@(#)biz31.c	8.1 (Berkeley) 6/6/93";
41 static char rcsid[] = "$OpenBSD: biz31.c,v 1.10 2006/03/17 19:17:13 moritz Exp $";
42 #endif
43 #endif /* not lint */
44 
45 #include "tip.h"
46 
47 #define MAXRETRY	3		/* sync up retry count */
48 #define DISCONNECT_CMD	"\21\25\11\24"	/* disconnection string */
49 
50 static int	biz_dialer(char *, char *);
51 static int	bizsync(int);
52 static int	echo(char *);
53 static void	sigALRM(int);
54 static int	detect(char *);
55 static int	flush(char *);
56 static int	bizsync(int);
57 
58 static	int timeout = 0;
59 static	jmp_buf timeoutbuf;
60 
61 /*
62  * Dial up on a BIZCOMP Model 1031 with either
63  * 	tone dialing (mod = "f")
64  *	pulse dialing (mod = "w")
65  */
66 static int
67 biz_dialer(char *num, char *mod)
68 {
69 	int connected = 0;
70 
71 	if (!bizsync(FD)) {
72 		logent(value(HOST), "", "biz", "out of sync");
73 		printf("bizcomp out of sync\n");
74 		delock(uucplock);
75 		exit(0);
76 	}
77 	if (boolean(value(VERBOSE)))
78 		printf("\nstarting call...");
79 	echo("#\rk$\r$\n");			/* disable auto-answer */
80 	echo("$>$.$ #\r");			/* tone/pulse dialing */
81 	echo(mod);
82 	echo("$\r$\n");
83 	echo("$>$.$ #\re$ ");			/* disconnection sequence */
84 	echo(DISCONNECT_CMD);
85 	echo("\r$\n$\r$\n");
86 	echo("$>$.$ #\rr$ ");			/* repeat dial */
87 	echo(num);
88 	echo("\r$\n");
89 	if (boolean(value(VERBOSE)))
90 		printf("ringing...");
91 	/*
92 	 * The reply from the BIZCOMP should be:
93 	 *	`^G NO CONNECTION\r\n^G\r\n'	failure
94 	 *	` CONNECTION\r\n^G'		success
95 	 */
96 	connected = detect(" ");
97 #ifdef ACULOG
98 	if (timeout) {
99 		char line[80];
100 
101 		(void)snprintf(line, sizeof line, "%ld second dial timeout",
102 			number(value(DIALTIMEOUT)));
103 		logent(value(HOST), num, "biz", line);
104 	}
105 #endif
106 	if (!connected)
107 		flush(" NO CONNECTION\r\n\07\r\n");
108 	else
109 		flush("CONNECTION\r\n\07");
110 	if (timeout)
111 		biz31_disconnect();	/* insurance */
112 	return (connected);
113 }
114 
115 int
116 biz31w_dialer(char *num, char *acu)
117 {
118 	return (biz_dialer(num, "w"));
119 }
120 
121 int
122 biz31f_dialer(char *num, char *acu)
123 {
124 	return (biz_dialer(num, "f"));
125 }
126 
127 void
128 biz31_disconnect(void)
129 {
130 	write(FD, DISCONNECT_CMD, sizeof(DISCONNECT_CMD)-1);
131 	sleep(2);
132 	tcflush(FD, TCIOFLUSH);
133 }
134 
135 void
136 biz31_abort(void)
137 {
138 	write(FD, "\33", 1);
139 }
140 
141 static int
142 echo(char *s)
143 {
144 	char c;
145 
146 	while (c = *s++) switch (c) {
147 
148 	case '$':
149 		read(FD, &c, 1);
150 		s++;
151 		break;
152 
153 	case '#':
154 		c = *s++;
155 		write(FD, &c, 1);
156 		break;
157 
158 	default:
159 		write(FD, &c, 1);
160 		read(FD, &c, 1);
161 	}
162 }
163 
164 /*ARGSUSED*/
165 static void
166 sigALRM(int signo)
167 {
168 	timeout = 1;
169 	longjmp(timeoutbuf, 1);
170 }
171 
172 static int
173 detect(char *s)
174 {
175 	sig_t f;
176 	char c;
177 
178 	f = signal(SIGALRM, sigALRM);
179 	timeout = 0;
180 	while (*s) {
181 		if (setjmp(timeoutbuf)) {
182 			printf("\07timeout waiting for reply\n");
183 			biz31_abort();
184 			break;
185 		}
186 		alarm(number(value(DIALTIMEOUT)));
187 		read(FD, &c, 1);
188 		alarm(0);
189 		if (c != *s++)
190 			break;
191 	}
192 	signal(SIGALRM, f);
193 	return (timeout == 0);
194 }
195 
196 static int
197 flush(char *s)
198 {
199 	sig_t f;
200 	char c;
201 
202 	f = signal(SIGALRM, sigALRM);
203 	while (*s++) {
204 		if (setjmp(timeoutbuf))
205 			break;
206 		alarm(10);
207 		read(FD, &c, 1);
208 		alarm(0);
209 	}
210 	signal(SIGALRM, f);
211 	timeout = 0;			/* guard against disconnection */
212 }
213 
214 /*
215  * This convoluted piece of code attempts to get
216  *  the bizcomp in sync.  If you don't have the capacity or nread
217  *  call there are gory ways to simulate this.
218  */
219 static int
220 bizsync(int fd)
221 {
222 #ifdef FIOCAPACITY
223 	struct capacity b;
224 #	define chars(b)	((b).cp_nbytes)
225 #	define IOCTL	FIOCAPACITY
226 #endif
227 #ifdef FIONREAD
228 	long b;
229 #	define chars(b)	(b)
230 #	define IOCTL	FIONREAD
231 #endif
232 	int already = 0;
233 	char buf[10];
234 
235 retry:
236 	if (ioctl(fd, IOCTL, (caddr_t)&b) >= 0 && chars(b) > 0)
237 		tcflush(FD, TCIOFLUSH);
238 	write(fd, "\rp>\r", 4);
239 	sleep(1);
240 	if (ioctl(fd, IOCTL, (caddr_t)&b) >= 0) {
241 		if (chars(b) != 10) {
242 	nono:
243 			if (already > MAXRETRY)
244 				return (0);
245 			write(fd, DISCONNECT_CMD, 4);
246 			sleep(2);
247 			already++;
248 			goto retry;
249 		} else {
250 			read(fd, buf, 10);
251 			if (strncmp(buf, "p >\r\n\r\n>", 8))
252 				goto nono;
253 		}
254 	}
255 	return (1);
256 }
257