1#! /bin/sh 2# 3# SPDX-License-Identifier: BSD-2-Clause-FreeBSD 4# 5# Copyright (c) 2010 Gordon Tetlow 6# All rights reserved. 7# 8# Redistribution and use in source and binary forms, with or without 9# modification, are permitted provided that the following conditions 10# are met: 11# 1. Redistributions of source code must retain the above copyright 12# notice, this list of conditions and the following disclaimer. 13# 2. Redistributions in binary form must reproduce the above copyright 14# notice, this list of conditions and the following disclaimer in the 15# documentation and/or other materials provided with the distribution. 16# 17# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27# SUCH DAMAGE. 28# 29# $FreeBSD$ 30 31# Usage: add_to_manpath path 32# Adds a variable to manpath while ensuring we don't have duplicates. 33# Returns true if we were able to add something. False otherwise. 34add_to_manpath() { 35 case "$manpath" in 36 *:$1) decho " Skipping duplicate manpath entry $1" 2 ;; 37 $1:*) decho " Skipping duplicate manpath entry $1" 2 ;; 38 *:$1:*) decho " Skipping duplicate manpath entry $1" 2 ;; 39 *) if [ -d "$1" ]; then 40 decho " Adding $1 to manpath" 41 manpath="$manpath:$1" 42 return 0 43 fi 44 ;; 45 esac 46 47 return 1 48} 49 50# Usage: build_manlocales 51# Builds a correct MANLOCALES variable. 52build_manlocales() { 53 # If the user has set manlocales, who are we to argue. 54 if [ -n "$MANLOCALES" ]; then 55 return 56 fi 57 58 parse_configs 59 60 # Trim leading colon 61 MANLOCALES=${manlocales#:} 62 63 decho "Available manual locales: $MANLOCALES" 64} 65 66# Usage: build_manpath 67# Builds a correct MANPATH variable. 68build_manpath() { 69 local IFS 70 71 # If the user has set a manpath, who are we to argue. 72 if [ -n "$MANPATH" ]; then 73 case "$MANPATH" in 74 *:) PREPEND_MANPATH=${MANPATH} ;; 75 :*) APPEND_MANPATH=${MANPATH} ;; 76 *::*) 77 PREPEND_MANPATH=${MANPATH%%::*} 78 APPEND_MANPATH=${MANPATH#*::} 79 ;; 80 *) return ;; 81 esac 82 fi 83 84 if [ -n "$PREPEND_MANPATH" ]; then 85 IFS=: 86 for path in $PREPEND_MANPATH; do 87 add_to_manpath "$path" 88 done 89 unset IFS 90 fi 91 92 search_path 93 94 decho "Adding default manpath entries" 95 IFS=: 96 for path in $man_default_path; do 97 add_to_manpath "$path" 98 done 99 unset IFS 100 101 parse_configs 102 103 if [ -n "$APPEND_MANPATH" ]; then 104 IFS=: 105 for path in $APPEND_MANPATH; do 106 add_to_manpath "$path" 107 done 108 unset IFS 109 fi 110 # Trim leading colon 111 MANPATH=${manpath#:} 112 113 decho "Using manual path: $MANPATH" 114} 115 116# Usage: check_cat catglob 117# Checks to see if a cat glob is available. 118check_cat() { 119 if exists "$1"; then 120 use_cat=yes 121 catpage=$found 122 setup_cattool $catpage 123 decho " Found catpage $catpage" 124 return 0 125 else 126 return 1 127 fi 128} 129 130# Usage: check_man manglob catglob 131# Given 2 globs, figures out if the manglob is available, if so, check to 132# see if the catglob is also available and up to date. 133check_man() { 134 if exists "$1"; then 135 # We have a match, check for a cat page 136 manpage=$found 137 setup_cattool $manpage 138 decho " Found manpage $manpage" 139 140 if [ -n "${use_width}" ]; then 141 # non-standard width 142 unset use_cat 143 decho " Skipping catpage: non-standard page width" 144 elif exists "$2" && is_newer $found $manpage; then 145 # cat page found and is newer, use that 146 use_cat=yes 147 catpage=$found 148 setup_cattool $catpage 149 decho " Using catpage $catpage" 150 else 151 # no cat page or is older 152 unset use_cat 153 decho " Skipping catpage: not found or old" 154 fi 155 return 0 156 fi 157 158 return 1 159} 160 161# Usage: decho "string" [debuglevel] 162# Echoes to stderr string prefaced with -- if high enough debuglevel. 163decho() { 164 if [ $debug -ge ${2:-1} ]; then 165 echo "-- $1" >&2 166 fi 167} 168 169# Usage: exists glob 170# Returns true if glob resolves to a real file. 171exists() { 172 local IFS 173 174 # Don't accidentally inherit callers IFS (breaks perl manpages) 175 unset IFS 176 177 # Use some globbing tricks in the shell to determine if a file 178 # exists or not. 179 set +f 180 set -- "$1" $1 181 set -f 182 183 if [ "$1" != "$2" -a -r "$2" ]; then 184 found="$2" 185 return 0 186 fi 187 188 return 1 189} 190 191# Usage: find_file path section subdir pagename 192# Returns: true if something is matched and found. 193# Search the given path/section combo for a given page. 194find_file() { 195 local manroot catroot mann man0 catn cat0 196 197 manroot="$1/man$2" 198 catroot="$1/cat$2" 199 if [ -n "$3" ]; then 200 manroot="$manroot/$3" 201 catroot="$catroot/$3" 202 fi 203 204 if [ ! -d "$manroot" -a ! -d "$catroot" ]; then 205 return 1 206 fi 207 decho " Searching directory $manroot" 2 208 209 mann="$manroot/$4.$2*" 210 man0="$manroot/$4.0*" 211 catn="$catroot/$4.$2*" 212 cat0="$catroot/$4.0*" 213 214 # This is the behavior as seen by the original man utility. 215 # Let's not change that which doesn't seem broken. 216 if check_man "$mann" "$catn"; then 217 return 0 218 elif check_man "$man0" "$cat0"; then 219 return 0 220 elif check_cat "$catn"; then 221 return 0 222 elif check_cat "$cat0"; then 223 return 0 224 fi 225 226 return 1 227} 228 229# Usage: is_newer file1 file2 230# Returns true if file1 is newer than file2 as calculated by mtime. 231is_newer() { 232 if ! [ "$1" -ot "$2" ]; then 233 decho " mtime: $1 not older than $2" 3 234 return 0 235 else 236 decho " mtime: $1 older than $2" 3 237 return 1 238 fi 239} 240 241# Usage: manpath_parse_args "$@" 242# Parses commandline options for manpath. 243manpath_parse_args() { 244 local cmd_arg 245 246 while getopts 'Ldq' cmd_arg; do 247 case "${cmd_arg}" in 248 L) Lflag=Lflag ;; 249 d) debug=$(( $debug + 1 )) ;; 250 q) qflag=qflag ;; 251 *) manpath_usage ;; 252 esac 253 done >&2 254} 255 256# Usage: manpath_usage 257# Display usage for the manpath(1) utility. 258manpath_usage() { 259 echo 'usage: manpath [-Ldq]' >&2 260 exit 1 261} 262 263# Usage: manpath_warnings 264# Display some warnings to stderr. 265manpath_warnings() { 266 if [ -n "$Lflag" -a -n "$MANLOCALES" ]; then 267 echo "(Warning: MANLOCALES environment variable set)" >&2 268 fi 269} 270 271# Usage: man_check_for_so page path 272# Returns: True if able to resolve the file, false if it ended in tears. 273# Detects the presence of the .so directive and causes the file to be 274# redirected to another source file. 275man_check_for_so() { 276 local IFS line tstr 277 278 unset IFS 279 if [ -n "$catpage" ]; then 280 return 0 281 fi 282 283 # We need to loop to accommodate multiple .so directives. 284 while true 285 do 286 line=$($cattool $manpage | head -1) 287 case "$line" in 288 .so*) trim "${line#.so}" 289 decho "$manpage includes $tstr" 290 # Glob and check for the file. 291 if ! check_man "$path/$tstr*" ""; then 292 decho " Unable to find $tstr" 293 return 1 294 fi 295 ;; 296 *) break ;; 297 esac 298 done 299 300 return 0 301} 302 303# Usage: man_display_page 304# Display either the manpage or catpage depending on the use_cat variable 305man_display_page() { 306 local IFS pipeline testline 307 308 # We are called with IFS set to colon. This causes really weird 309 # things to happen for the variables that have spaces in them. 310 unset IFS 311 312 # If we are supposed to use a catpage and we aren't using troff(1) 313 # just zcat the catpage and we are done. 314 if [ -z "$tflag" -a -n "$use_cat" ]; then 315 if [ -n "$wflag" ]; then 316 echo "$catpage (source: $manpage)" 317 ret=0 318 else 319 if [ $debug -gt 0 ]; then 320 decho "Command: $cattool $catpage | $MANPAGER" 321 ret=0 322 else 323 eval "$cattool $catpage | $MANPAGER" 324 ret=$? 325 fi 326 fi 327 return 328 fi 329 330 # Okay, we are using the manpage, do we just need to output the 331 # name of the manpage? 332 if [ -n "$wflag" ]; then 333 echo "$manpage" 334 ret=0 335 return 336 fi 337 338 if [ -n "$use_width" ]; then 339 mandoc_args="-O width=${use_width}" 340 fi 341 testline="mandoc -Tlint -Wunsupp >/dev/null 2>&1" 342 if [ -n "$tflag" ]; then 343 pipeline="mandoc -Tps $mandoc_args" 344 else 345 pipeline="mandoc $mandoc_args | $MANPAGER" 346 fi 347 348 if ! eval "$cattool $manpage | $testline" ;then 349 if which -s groff; then 350 man_display_page_groff 351 else 352 echo "This manpage needs groff(1) to be rendered" >&2 353 echo "First install groff(1): " >&2 354 echo "pkg install groff " >&2 355 ret=1 356 fi 357 return 358 fi 359 360 if [ $debug -gt 0 ]; then 361 decho "Command: $cattool $manpage | $pipeline" 362 ret=0 363 else 364 eval "$cattool $manpage | $pipeline" 365 ret=$? 366 fi 367} 368 369# Usage: man_display_page_groff 370# Display the manpage using groff 371man_display_page_groff() { 372 local EQN NROFF PIC TBL TROFF REFER VGRIND 373 local IFS l nroff_dev pipeline preproc_arg tool 374 375 # So, we really do need to parse the manpage. First, figure out the 376 # device flag (-T) we have to pass to eqn(1) and groff(1). Then, 377 # setup the pipeline of commands based on the user's request. 378 379 # If the manpage is from a particular charset, we need to setup nroff 380 # to properly output for the correct device. 381 case "${manpage}" in 382 *.${man_charset}/*) 383 # I don't pretend to know this; I'm just copying from the 384 # previous version of man(1). 385 case "$man_charset" in 386 KOI8-R) nroff_dev="koi8-r" ;; 387 ISO8859-1) nroff_dev="latin1" ;; 388 ISO8859-15) nroff_dev="latin1" ;; 389 UTF-8) nroff_dev="utf8" ;; 390 *) nroff_dev="ascii" ;; 391 esac 392 393 NROFF="$NROFF -T$nroff_dev" 394 EQN="$EQN -T$nroff_dev" 395 396 # Iff the manpage is from the locale and not just the charset, 397 # then we need to define the locale string. 398 case "${manpage}" in 399 */${man_lang}_${man_country}.${man_charset}/*) 400 NROFF="$NROFF -dlocale=$man_lang.$man_charset" 401 ;; 402 */${man_lang}.${man_charset}/*) 403 NROFF="$NROFF -dlocale=$man_lang.$man_charset" 404 ;; 405 esac 406 407 # Allow language specific calls to override the default 408 # set of utilities. 409 l=$(echo $man_lang | tr [:lower:] [:upper:]) 410 for tool in EQN NROFF PIC TBL TROFF REFER VGRIND; do 411 eval "$tool=\${${tool}_$l:-\$$tool}" 412 done 413 ;; 414 *) NROFF="$NROFF -Tascii" 415 EQN="$EQN -Tascii" 416 ;; 417 esac 418 419 if [ -z "$MANCOLOR" ]; then 420 NROFF="$NROFF -P-c" 421 fi 422 423 if [ -n "${use_width}" ]; then 424 NROFF="$NROFF -rLL=${use_width}n -rLT=${use_width}n" 425 fi 426 427 if [ -n "$MANROFFSEQ" ]; then 428 set -- -$MANROFFSEQ 429 while getopts 'egprtv' preproc_arg; do 430 case "${preproc_arg}" in 431 e) pipeline="$pipeline | $EQN" ;; 432 g) ;; # Ignore for compatibility. 433 p) pipeline="$pipeline | $PIC" ;; 434 r) pipeline="$pipeline | $REFER" ;; 435 t) pipeline="$pipeline | $TBL" ;; 436 v) pipeline="$pipeline | $VGRIND" ;; 437 *) usage ;; 438 esac 439 done 440 # Strip the leading " | " from the resulting pipeline. 441 pipeline="${pipeline#" | "}" 442 else 443 pipeline="$TBL" 444 fi 445 446 if [ -n "$tflag" ]; then 447 pipeline="$pipeline | $TROFF" 448 else 449 pipeline="$pipeline | $NROFF | $MANPAGER" 450 fi 451 452 if [ $debug -gt 0 ]; then 453 decho "Command: $cattool $manpage | $pipeline" 454 ret=0 455 else 456 eval "$cattool $manpage | $pipeline" 457 ret=$? 458 fi 459} 460 461# Usage: man_find_and_display page 462# Search through the manpaths looking for the given page. 463man_find_and_display() { 464 local found_page locpath p path sect 465 466 # Check to see if it's a file. But only if it has a '/' in 467 # the filename. 468 case "$1" in 469 */*) if [ -f "$1" -a -r "$1" ]; then 470 decho "Found a usable page, displaying that" 471 unset use_cat 472 manpage="$1" 473 setup_cattool $manpage 474 if man_check_for_so $manpage $(dirname $manpage); then 475 found_page=yes 476 man_display_page 477 fi 478 return 479 fi 480 ;; 481 esac 482 483 IFS=: 484 for sect in $MANSECT; do 485 decho "Searching section $sect" 2 486 for path in $MANPATH; do 487 for locpath in $locpaths; do 488 p=$path/$locpath 489 p=${p%/.} # Rid ourselves of the trailing /. 490 491 # Check if there is a MACHINE specific manpath. 492 if find_file $p $sect $MACHINE "$1"; then 493 if man_check_for_so $manpage $p; then 494 found_page=yes 495 man_display_page 496 if [ -n "$aflag" ]; then 497 continue 2 498 else 499 return 500 fi 501 fi 502 fi 503 504 # Check if there is a MACHINE_ARCH 505 # specific manpath. 506 if find_file $p $sect $MACHINE_ARCH "$1"; then 507 if man_check_for_so $manpage $p; then 508 found_page=yes 509 man_display_page 510 if [ -n "$aflag" ]; then 511 continue 2 512 else 513 return 514 fi 515 fi 516 fi 517 518 # Check plain old manpath. 519 if find_file $p $sect '' "$1"; then 520 if man_check_for_so $manpage $p; then 521 found_page=yes 522 man_display_page 523 if [ -n "$aflag" ]; then 524 continue 2 525 else 526 return 527 fi 528 fi 529 fi 530 done 531 done 532 done 533 unset IFS 534 535 # Nothing? Well, we are done then. 536 if [ -z "$found_page" ]; then 537 echo "No manual entry for $1" >&2 538 ret=1 539 return 540 fi 541} 542 543# Usage: man_parse_args "$@" 544# Parses commandline options for man. 545man_parse_args() { 546 local IFS cmd_arg 547 548 while getopts 'M:P:S:adfhkm:op:tw' cmd_arg; do 549 case "${cmd_arg}" in 550 M) MANPATH=$OPTARG ;; 551 P) MANPAGER=$OPTARG ;; 552 S) MANSECT=$OPTARG ;; 553 a) aflag=aflag ;; 554 d) debug=$(( $debug + 1 )) ;; 555 f) fflag=fflag ;; 556 h) man_usage 0 ;; 557 k) kflag=kflag ;; 558 m) mflag=$OPTARG ;; 559 o) oflag=oflag ;; 560 p) MANROFFSEQ=$OPTARG ;; 561 t) tflag=tflag ;; 562 w) wflag=wflag ;; 563 *) man_usage ;; 564 esac 565 done >&2 566 567 shift $(( $OPTIND - 1 )) 568 569 # Check the args for incompatible options. 570 case "${fflag}${kflag}${tflag}${wflag}" in 571 fflagkflag*) echo "Incompatible options: -f and -k"; man_usage ;; 572 fflag*tflag*) echo "Incompatible options: -f and -t"; man_usage ;; 573 fflag*wflag) echo "Incompatible options: -f and -w"; man_usage ;; 574 *kflagtflag*) echo "Incompatible options: -k and -t"; man_usage ;; 575 *kflag*wflag) echo "Incompatible options: -k and -w"; man_usage ;; 576 *tflagwflag) echo "Incompatible options: -t and -w"; man_usage ;; 577 esac 578 579 # Short circuit for whatis(1) and apropos(1) 580 if [ -n "$fflag" ]; then 581 do_whatis "$@" 582 exit 583 fi 584 585 if [ -n "$kflag" ]; then 586 do_apropos "$@" 587 exit 588 fi 589 590 IFS=: 591 for sect in $man_default_sections; do 592 if [ "$sect" = "$1" ]; then 593 decho "Detected manual section as first arg: $1" 594 MANSECT="$1" 595 shift 596 break 597 fi 598 done 599 unset IFS 600 601 pages="$*" 602} 603 604# Usage: man_setup 605# Setup various trivial but essential variables. 606man_setup() { 607 # Setup machine and architecture variables. 608 if [ -n "$mflag" ]; then 609 MACHINE_ARCH=${mflag%%:*} 610 MACHINE=${mflag##*:} 611 fi 612 if [ -z "$MACHINE_ARCH" ]; then 613 MACHINE_ARCH=$($SYSCTL -n hw.machine_arch) 614 fi 615 if [ -z "$MACHINE" ]; then 616 MACHINE=$($SYSCTL -n hw.machine) 617 fi 618 decho "Using architecture: $MACHINE_ARCH:$MACHINE" 619 620 setup_pager 621 622 # Setup manual sections to search. 623 if [ -z "$MANSECT" ]; then 624 MANSECT=$man_default_sections 625 fi 626 decho "Using manual sections: $MANSECT" 627 628 build_manpath 629 man_setup_locale 630 man_setup_width 631} 632 633# Usage: man_setup_width 634# Set up page width. 635man_setup_width() { 636 local sizes 637 638 unset use_width 639 case "$MANWIDTH" in 640 [0-9]*) 641 if [ "$MANWIDTH" -gt 0 2>/dev/null ]; then 642 use_width=$MANWIDTH 643 fi 644 ;; 645 [Tt][Tt][Yy]) 646 if { sizes=$($STTY size 0>&3 2>/dev/null); } 3>&1; then 647 set -- $sizes 648 if [ $2 -gt 80 ]; then 649 use_width=$(($2-2)) 650 fi 651 fi 652 ;; 653 esac 654 if [ -n "$use_width" ]; then 655 decho "Using non-standard page width: ${use_width}" 656 else 657 decho 'Using standard page width' 658 fi 659} 660 661# Usage: man_setup_locale 662# Setup necessary locale variables. 663man_setup_locale() { 664 local lang_cc 665 666 locpaths='.' 667 man_charset='US-ASCII' 668 669 # Setup locale information. 670 if [ -n "$oflag" ]; then 671 decho 'Using non-localized manpages' 672 else 673 # Use the locale tool to give us the proper LC_CTYPE 674 eval $( $LOCALE ) 675 676 case "$LC_CTYPE" in 677 C) ;; 678 POSIX) ;; 679 [a-z][a-z]_[A-Z][A-Z]\.*) 680 lang_cc="${LC_CTYPE%.*}" 681 man_lang="${LC_CTYPE%_*}" 682 man_country="${lang_cc#*_}" 683 man_charset="${LC_CTYPE#*.}" 684 locpaths="$LC_CTYPE" 685 locpaths="$locpaths:$man_lang.$man_charset" 686 if [ "$man_lang" != "en" ]; then 687 locpaths="$locpaths:en.$man_charset" 688 fi 689 locpaths="$locpaths:." 690 ;; 691 *) echo 'Unknown locale, assuming C' >&2 692 ;; 693 esac 694 fi 695 696 decho "Using locale paths: $locpaths" 697} 698 699# Usage: man_usage [exitcode] 700# Display usage for the man utility. 701man_usage() { 702 echo 'Usage:' 703 echo ' man [-adho] [-t | -w] [-M manpath] [-P pager] [-S mansect]' 704 echo ' [-m arch[:machine]] [-p [eprtv]] [mansect] page [...]' 705 echo ' man -f page [...] -- Emulates whatis(1)' 706 echo ' man -k page [...] -- Emulates apropos(1)' 707 708 # When exit'ing with -h, it's not an error. 709 exit ${1:-1} 710} 711 712# Usage: parse_configs 713# Reads the end-user adjustable config files. 714parse_configs() { 715 local IFS file files 716 717 if [ -n "$parsed_configs" ]; then 718 return 719 fi 720 721 unset IFS 722 723 # Read the global config first in case the user wants 724 # to override config_local. 725 if [ -r "$config_global" ]; then 726 parse_file "$config_global" 727 fi 728 729 # Glob the list of files to parse. 730 set +f 731 files=$(echo $config_local) 732 set -f 733 734 for file in $files; do 735 if [ -r "$file" ]; then 736 parse_file "$file" 737 fi 738 done 739 740 parsed_configs='yes' 741} 742 743# Usage: parse_file file 744# Reads the specified config files. 745parse_file() { 746 local file line tstr var 747 748 file="$1" 749 decho "Parsing config file: $file" 750 while read line; do 751 decho " $line" 2 752 case "$line" in 753 \#*) decho " Comment" 3 754 ;; 755 MANPATH*) decho " MANPATH" 3 756 trim "${line#MANPATH}" 757 add_to_manpath "$tstr" 758 ;; 759 MANLOCALE*) decho " MANLOCALE" 3 760 trim "${line#MANLOCALE}" 761 manlocales="$manlocales:$tstr" 762 ;; 763 MANCONFIG*) decho " MANCONFIG" 3 764 trim "${line#MANCONFIG}" 765 config_local="$tstr" 766 ;; 767 # Set variables in the form of FOO_BAR 768 *_*[\ \ ]*) var="${line%%[\ \ ]*}" 769 trim "${line#$var}" 770 eval "$var=\"$tstr\"" 771 decho " Parsed $var" 3 772 ;; 773 esac 774 done < "$file" 775} 776 777# Usage: search_path 778# Traverse $PATH looking for manpaths. 779search_path() { 780 local IFS p path 781 782 decho "Searching PATH for man directories" 783 784 IFS=: 785 for path in $PATH; do 786 if add_to_manpath "$path/man"; then 787 : 788 elif add_to_manpath "$path/MAN"; then 789 : 790 else 791 case "$path" in 792 */bin) p="${path%/bin}/share/man" 793 add_to_manpath "$p" 794 p="${path%/bin}/man" 795 add_to_manpath "$p" 796 ;; 797 esac 798 fi 799 done 800 unset IFS 801 802 if [ -z "$manpath" ]; then 803 decho ' Unable to find any manpaths, using default' 804 manpath=$man_default_path 805 fi 806} 807 808# Usage: search_whatis cmd [arglist] 809# Do the heavy lifting for apropos/whatis 810search_whatis() { 811 local IFS bad cmd f good key keywords loc opt out path rval wlist 812 813 cmd="$1" 814 shift 815 816 whatis_parse_args "$@" 817 818 build_manpath 819 build_manlocales 820 setup_pager 821 822 if [ "$cmd" = "whatis" ]; then 823 opt="-w" 824 fi 825 826 f='whatis' 827 828 IFS=: 829 for path in $MANPATH; do 830 if [ \! -d "$path" ]; then 831 decho "Skipping non-existent path: $path" 2 832 continue 833 fi 834 835 if [ -f "$path/$f" -a -r "$path/$f" ]; then 836 decho "Found whatis: $path/$f" 837 wlist="$wlist $path/$f" 838 fi 839 840 for loc in $MANLOCALES; do 841 if [ -f "$path/$loc/$f" -a -r "$path/$loc/$f" ]; then 842 decho "Found whatis: $path/$loc/$f" 843 wlist="$wlist $path/$loc/$f" 844 fi 845 done 846 done 847 unset IFS 848 849 if [ -z "$wlist" ]; then 850 echo "$cmd: no whatis databases in $MANPATH" >&2 851 exit 1 852 fi 853 854 rval=0 855 for key in $keywords; do 856 out=$(grep -Ehi $opt -- "$key" $wlist) 857 if [ -n "$out" ]; then 858 good="$good\\n$out" 859 else 860 bad="$bad\\n$key: nothing appropriate" 861 rval=1 862 fi 863 done 864 865 # Strip leading carriage return. 866 good=${good#\\n} 867 bad=${bad#\\n} 868 869 if [ -n "$good" ]; then 870 echo -e "$good" | $MANPAGER 871 fi 872 873 if [ -n "$bad" ]; then 874 echo -e "$bad" >&2 875 fi 876 877 exit $rval 878} 879 880# Usage: setup_cattool page 881# Finds an appropriate decompressor based on extension 882setup_cattool() { 883 case "$1" in 884 *.bz) cattool='/usr/bin/bzcat' ;; 885 *.bz2) cattool='/usr/bin/bzcat' ;; 886 *.gz) cattool='/usr/bin/zcat' ;; 887 *.lzma) cattool='/usr/bin/lzcat' ;; 888 *.xz) cattool='/usr/bin/xzcat' ;; 889 *) cattool='/usr/bin/zcat -f' ;; 890 esac 891} 892 893# Usage: setup_pager 894# Correctly sets $MANPAGER 895setup_pager() { 896 # Setup pager. 897 if [ -z "$MANPAGER" ]; then 898 if [ -n "$MANCOLOR" ]; then 899 MANPAGER="less -sR" 900 else 901 if [ -n "$PAGER" ]; then 902 MANPAGER="$PAGER" 903 else 904 MANPAGER="less -s" 905 fi 906 fi 907 fi 908 decho "Using pager: $MANPAGER" 909} 910 911# Usage: trim string 912# Trims whitespace from beginning and end of a variable 913trim() { 914 tstr=$1 915 while true; do 916 case "$tstr" in 917 [\ \ ]*) tstr="${tstr##[\ \ ]}" ;; 918 *[\ \ ]) tstr="${tstr%%[\ \ ]}" ;; 919 *) break ;; 920 esac 921 done 922} 923 924# Usage: whatis_parse_args "$@" 925# Parse commandline args for whatis and apropos. 926whatis_parse_args() { 927 local cmd_arg 928 while getopts 'd' cmd_arg; do 929 case "${cmd_arg}" in 930 d) debug=$(( $debug + 1 )) ;; 931 *) whatis_usage ;; 932 esac 933 done >&2 934 935 shift $(( $OPTIND - 1 )) 936 937 keywords="$*" 938} 939 940# Usage: whatis_usage 941# Display usage for the whatis/apropos utility. 942whatis_usage() { 943 echo "usage: $cmd [-d] keyword [...]" 944 exit 1 945} 946 947 948 949# Supported commands 950do_apropos() { 951 [ $(stat -f %i /usr/bin/man) -ne $(stat -f %i /usr/bin/apropos) ] && \ 952 exec apropos "$@" 953 search_whatis apropos "$@" 954} 955 956do_man() { 957 man_parse_args "$@" 958 if [ -z "$pages" ]; then 959 echo 'What manual page do you want?' >&2 960 exit 1 961 fi 962 man_setup 963 964 for page in $pages; do 965 decho "Searching for $page" 966 man_find_and_display "$page" 967 done 968 969 exit ${ret:-0} 970} 971 972do_manpath() { 973 manpath_parse_args "$@" 974 if [ -z "$qflag" ]; then 975 manpath_warnings 976 fi 977 if [ -n "$Lflag" ]; then 978 build_manlocales 979 echo $MANLOCALES 980 else 981 build_manpath 982 echo $MANPATH 983 fi 984 exit 0 985} 986 987do_whatis() { 988 [ $(stat -f %i /usr/bin/man) -ne $(stat -f %i /usr/bin/whatis) ] && \ 989 exec whatis "$@" 990 search_whatis whatis "$@" 991} 992 993# User's PATH setting decides on the groff-suite to pick up. 994EQN=eqn 995NROFF='groff -S -P-h -Wall -mtty-char -man' 996PIC=pic 997REFER=refer 998TBL=tbl 999TROFF='groff -S -man' 1000VGRIND=vgrind 1001 1002LOCALE=/usr/bin/locale 1003STTY=/bin/stty 1004SYSCTL=/sbin/sysctl 1005 1006debug=0 1007man_default_sections='1:8:2:3:n:4:5:6:7:9:l' 1008man_default_path='/usr/share/man:/usr/share/openssl/man:/usr/local/share/man:/usr/local/man' 1009cattool='/usr/bin/zcat -f' 1010 1011config_global='/etc/man.conf' 1012 1013# This can be overridden via a setting in /etc/man.conf. 1014config_local='/usr/local/etc/man.d/*.conf' 1015 1016# Set noglobbing for now. I don't want spurious globbing. 1017set -f 1018 1019case "$0" in 1020*apropos) do_apropos "$@" ;; 1021*manpath) do_manpath "$@" ;; 1022*whatis) do_whatis "$@" ;; 1023*) do_man "$@" ;; 1024esac 1025