xref: /freebsd/usr.bin/m4/m4.1 (revision f3e7afe2d7b262ab55ab818445d4dfdb6e0c70a9)
1.\"	$NetBSD: m4.1,v 1.23 2012/04/08 22:00:39 wiz Exp $
2.\"	@(#) $OpenBSD: m4.1,v 1.63 2015/09/14 20:06:58 schwarze Exp $
3.\"
4.\" Copyright (c) 1989, 1993
5.\"	The Regents of the University of California.  All rights reserved.
6.\"
7.\" This code is derived from software contributed to Berkeley by
8.\" Ozan Yigit at York University.
9.\"
10.\" Redistribution and use in source and binary forms, with or without
11.\" modification, are permitted provided that the following conditions
12.\" are met:
13.\" 1. Redistributions of source code must retain the above copyright
14.\"    notice, this list of conditions and the following disclaimer.
15.\" 2. Redistributions in binary form must reproduce the above copyright
16.\"    notice, this list of conditions and the following disclaimer in the
17.\"    documentation and/or other materials provided with the distribution.
18.\" 3. Neither the name of the University nor the names of its contributors
19.\"    may be used to endorse or promote products derived from this software
20.\"    without specific prior written permission.
21.\"
22.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32.\" SUCH DAMAGE.
33.\"
34.\" $FreeBSD$
35.\"
36.Dd $Mdocdate: September 14 2015 $
37.Dt M4 1
38.Os
39.Sh NAME
40.Nm m4
41.Nd macro language processor
42.Sh SYNOPSIS
43.Nm
44.Op Fl gPs
45.Oo
46.Sm off
47.Fl D Ar name Op No = Ar value
48.Sm on
49.Oc
50.Op Fl d Ar flags
51.Op Fl I Ar dirname
52.Op Fl o Ar filename
53.Op Fl t Ar macro
54.Op Fl U Ns Ar name
55.Op Ar
56.Sh DESCRIPTION
57The
58.Nm
59utility is a macro processor that can be used as a front end to any
60language (e.g., C, ratfor, fortran, lex, and yacc).
61If no input files are given,
62.Nm
63reads from the standard input,
64otherwise files specified on the command line are
65processed in the given order.
66Input files can be regular files, files in the m4 include paths, or a
67single dash
68.Pq Sq - ,
69denoting standard input.
70.Nm
71writes
72the processed text to the standard output, unless told otherwise.
73.Pp
74Macro calls have the form name(argument1[, argument2, ..., argumentN]).
75.Pp
76There cannot be any space following the macro name and the open
77parenthesis
78.Pq Sq \&( .
79If the macro name is not followed by an open
80parenthesis it is processed with no arguments.
81.Pp
82Macro names consist of a leading alphabetic or underscore
83possibly followed by alphanumeric or underscore characters, e.g.,
84valid macro names match the pattern
85.Dq [a-zA-Z_][a-zA-Z0-9_]* .
86.Pp
87In arguments to macros, leading unquoted space, tab, and newline
88.Pq Sq \en
89characters are ignored.
90To quote strings, use left and right single quotes
91.Pq e.g., Sq \ \&this is a string with a leading space .
92You can change the quote characters with the
93.Ic changequote
94built-in macro.
95.Pp
96Most built-ins do not make any sense without arguments, and hence are not
97recognized as special when not followed by an open parenthesis.
98.Pp
99The options are as follows:
100.Bl -tag -width Ds
101.It Fl D Ns Ar name Ns Op = Ns Ar value
102Define the symbol
103.Ar name
104to have some value (or
105.Dv NULL ) .
106.It Fl d Ar "flags"
107Set trace flags.
108.Ar flags
109may hold the following:
110.Bl -tag -width Ds
111.It Ar a
112print macro arguments.
113.It Ar c
114print macro expansion over several lines.
115.It Ar e
116print result of macro expansion.
117.It Ar f
118print filename location.
119.It Ar l
120print line number.
121.It Ar q
122quote arguments and expansion with the current quotes.
123.It Ar t
124start with all macros traced.
125.It Ar x
126number macro expansions.
127.It Ar V
128turn on all options.
129.El
130.Pp
131By default, trace is set to
132.Qq eq .
133.It Fl g
134Activate GNU-m4 compatibility mode.
135In this mode, translit handles simple character
136ranges (e.g., a-z), regular expressions mimic emacs behavior,
137multiple m4wrap calls are handled as a stack,
138the number of diversions is unlimited,
139empty names for macro definitions are allowed,
140and eval understands
141.Sq 0rbase:value
142numbers.
143.It Fl I Ar "dirname"
144Add directory
145.Ar dirname
146to the include path.
147.It Fl o Ar filename
148Send trace output to
149.Ar filename .
150.It Fl P
151Prefix all built-in macros with
152.Sq m4_ .
153For example, instead of writing
154.Ic define ,
155use
156.Ic m4_define .
157.It Fl s
158Output line synchronization directives, suitable for
159.Xr cpp 1 .
160.It Fl t Ar macro
161Turn tracing on for
162.Ar macro .
163.It Fl "U" Ns Ar "name"
164Undefine the symbol
165.Ar name .
166.El
167.Sh SYNTAX
168.Nm
169provides the following built-in macros.
170They may be redefined, losing their original meaning.
171Return values are null unless otherwise stated.
172.Bl -tag -width changequote
173.It Fn builtin name
174Calls a built-in by its
175.Fa name ,
176overriding possible redefinitions.
177.It Fn changecom startcomment endcomment
178Changes the start comment and end comment sequences.
179Comment sequences may be up to five characters long.
180The default values are the hash sign
181and the newline character.
182.Bd -literal -offset indent
183# This is a comment
184.Ed
185.Pp
186With no arguments, comments are turned off.
187With one single argument, the end comment sequence is set
188to the newline character.
189.It Fn changequote beginquote endquote
190Defines the open quote and close quote sequences.
191Quote sequences may be up to five characters long.
192The default values are the backquote character and the quote
193character.
194.Bd -literal -offset indent
195`Here is a quoted string'
196.Ed
197.Pp
198With no arguments, the default quotes are restored.
199With one single argument, the close quote sequence is set
200to the newline character.
201.It Fn decr arg
202Decrements the argument
203.Fa arg
204by 1.
205The argument
206.Fa arg
207must be a valid numeric string.
208.It Fn define name value
209Define a new macro named by the first argument
210.Fa name
211to have the
212value of the second argument
213.Fa value .
214Each occurrence of
215.Sq $n
216(where
217.Ar n
218is 0 through 9) is replaced by the
219.Ar n Ns 'th
220argument.
221.Sq $0
222is the name of the calling macro.
223Undefined arguments are replaced by a null string.
224.Sq $#
225is replaced by the number of arguments;
226.Sq $*
227is replaced by all arguments comma separated;
228.Sq $@
229is the same as
230.Sq $*
231but all arguments are quoted against further expansion.
232.It Fn defn name ...
233Returns the quoted definition for each argument.
234This can be used to rename
235macro definitions (even for built-in macros).
236.It Fn divert num
237There are 10 output queues (numbered 0-9).
238At the end of processing
239.Nm
240concatenates all the queues in numerical order to produce the
241final output.
242Initially the output queue is 0.
243The divert
244macro allows you to select a new output queue (an invalid argument
245passed to divert causes output to be discarded).
246.It Ic divnum
247Returns the current output queue number.
248.It Ic dnl
249Discard input characters up to and including the next newline.
250.It Fn dumpdef name ...
251Prints the names and definitions for the named items, or for everything
252if no arguments are passed.
253.It Fn errprint msg
254Prints the first argument on the standard error output stream.
255.It Fn esyscmd cmd
256Passes its first argument to a shell and returns the shell's standard output.
257Note that the shell shares its standard input and standard error with
258.Nm .
259.It Fn eval expr[,radix[,minimum]]
260Computes the first argument as an arithmetic expression using 32-bit
261arithmetic.
262Operators are the standard C ternary, arithmetic, logical,
263shift, relational, bitwise, and parentheses operators.
264You can specify
265octal, decimal, and hexadecimal numbers as in C.
266The optional second argument
267.Fa radix
268specifies the radix for the result and the optional third argument
269.Fa minimum
270specifies the minimum number of digits in the result.
271.It Fn expr expr
272This is an alias for
273.Ic eval .
274.It Fn format formatstring arg1 ...
275Returns
276.Fa formatstring
277with escape sequences substituted with
278.Fa arg1
279and following arguments, in a way similar to
280.Xr printf 3 .
281This built-in is only available in GNU-m4 compatibility mode, and the only
282parameters implemented are there for autoconf compatibility:
283left-padding flag, an optional field width, a maximum field width,
284*-specified field widths, and the %s and %c data type.
285.It Fn ifdef name yes no
286If the macro named by the first argument is defined then return the second
287argument, otherwise the third.
288If there is no third argument, the value is
289.Dv NULL .
290The word
291.Qq unix
292is predefined.
293.It Fn ifelse a b yes ...
294If the first argument
295.Fa a
296matches the second argument
297.Fa b
298then
299.Fn ifelse
300returns
301the third argument
302.Fa yes .
303If the match fails the three arguments are
304discarded and the next three arguments are used until there is
305zero or one arguments left, either this last argument or
306.Dv NULL
307is returned if no other matches were found.
308.It Fn include name
309Returns the contents of the file specified in the first argument.
310If the file is not found as is, look through the include path:
311first the directories specified with
312.Fl I
313on the command line, then the environment variable
314.Ev M4PATH ,
315as a colon-separated list of directories.
316Include aborts with an error message if the file cannot be included.
317.It Fn incr arg
318Increments the argument by 1.
319The argument must be a valid numeric string.
320.It Fn index string substring
321Returns the index of the second argument in the first argument (e.g.,
322.Ic index(the quick brown fox jumped, fox)
323returns 16).
324If the second
325argument is not found index returns \-1.
326.It Fn indir macro arg1 ...
327Indirectly calls the macro whose name is passed as the first argument,
328with the remaining arguments passed as first, ... arguments.
329.It Fn len arg
330Returns the number of characters in the first argument.
331Extra arguments
332are ignored.
333.It Fn m4exit code
334Immediately exits with the return value specified by the first argument,
3350 if none.
336.It Fn m4wrap todo
337Allows you to define what happens at the final
338.Dv EOF ,
339usually for cleanup purposes (e.g.,
340.Ic m4wrap("cleanup(tempfile)")
341causes the macro cleanup to be
342invoked after all other processing is done).
343.Pp
344Multiple calls to
345.Fn m4wrap
346get inserted in sequence at the final
347.Dv EOF .
348.It Fn maketemp template
349Like
350.Ic mkstemp .
351.It Fn mkstemp template
352Invokes
353.Xr mkstemp 3
354on the first argument, and returns the modified string.
355This can be used to create unique
356temporary file names.
357.It Fn paste file
358Includes the contents of the file specified by the first argument without
359any macro processing.
360Aborts with an error message if the file cannot be
361included.
362.It Fn patsubst string regexp replacement
363Substitutes a regular expression in a string with a replacement string.
364Usual substitution patterns apply: an ampersand
365.Pq Sq \&&
366is replaced by the string matching the regular expression.
367The string
368.Sq \e# ,
369where
370.Sq #
371is a digit, is replaced by the corresponding back-reference.
372.It Fn popdef arg ...
373Restores the
374.Ic pushdef Ns ed
375definition for each argument.
376.It Fn pushdef macro def
377Takes the same arguments as
378.Ic define ,
379but it saves the definition on a
380stack for later retrieval by
381.Fn popdef .
382.It Fn regexp string regexp replacement
383Finds a regular expression in a string.
384If no further arguments are given,
385it returns the first match position or \-1 if no match.
386If a third argument
387is provided, it returns the replacement string, with sub-patterns replaced.
388.It Fn shift arg1 ...
389Returns all but the first argument, the remaining arguments are
390quoted and pushed back with commas in between.
391The quoting
392nullifies the effect of the extra scan that will subsequently be
393performed.
394.It Fn sinclude file
395Similar to
396.Ic include ,
397except it ignores any errors.
398.It Fn spaste file
399Similar to
400.Fn paste ,
401except it ignores any errors.
402.It Fn substr string offset length
403Returns a substring of the first argument starting at the offset specified
404by the second argument and the length specified by the third argument.
405If no third argument is present it returns the rest of the string.
406.It Fn syscmd cmd
407Passes the first argument to the shell.
408Nothing is returned.
409.It Ic sysval
410Returns the return value from the last
411.Ic syscmd .
412.It Fn traceon arg ...
413Enables tracing of macro expansions for the given arguments, or for all
414macros if no argument is given.
415.It Fn traceoff arg ...
416Disables tracing of macro expansions for the given arguments, or for all
417macros if no argument is given.
418.It Fn translit string mapfrom mapto
419Transliterate the characters in the first argument from the set
420given by the second argument to the set given by the third.
421You cannot use
422.Xr tr 1
423style abbreviations.
424.It Fn undefine name1 ...
425Removes the definition for the macros specified by its arguments.
426.It Fn undivert arg ...
427Flushes the named output queues (or all queues if no arguments).
428.It Ic unix
429A pre-defined macro for testing the OS platform.
430.It Ic __line__
431Returns the current file's line number.
432.It Ic __file__
433Returns the current file's name.
434.El
435.Sh EXIT STATUS
436.Ex -std m4
437.Pp
438But note that the
439.Ic m4exit
440macro can modify the exit status.
441.Sh STANDARDS
442The
443.Nm
444utility is compliant with the
445.St -p1003.1-2008
446specification.
447.Pp
448The flags
449.Op Fl dgIPot
450and the macros
451.Ic builtin ,
452.Ic esyscmd ,
453.Ic expr ,
454.Ic format ,
455.Ic indir ,
456.Ic paste ,
457.Ic patsubst ,
458.Ic regexp ,
459.Ic spaste ,
460.Ic unix ,
461.Ic __line__ ,
462and
463.Ic __file__
464are extensions to that specification.
465.Pp
466.Ic maketemp
467is not supposed to be a synonym for
468.Ic mkstemp ,
469but instead to be an insecure temporary file name creation function.
470It is marked by
471.St -p1003.1-2008
472as being obsolescent and should not be used if portability is a concern.
473.Pp
474The output format of
475.Ic traceon
476and
477.Ic dumpdef
478are not specified in any standard,
479are likely to change and should not be relied upon.
480The current format of tracing is closely modelled on
481.Nm gnu-m4 ,
482to allow
483.Nm autoconf
484to work.
485.Pp
486The built-ins
487.Ic pushdef
488and
489.Ic popdef
490handle macro definitions as a stack.
491However,
492.Ic define
493interacts with the stack in an undefined way.
494In this implementation,
495.Ic define
496replaces the top-most definition only.
497Other implementations may erase all definitions on the stack instead.
498.Pp
499All built-ins do expand without arguments in many other
500.Nm .
501.Pp
502Many other
503.Nm
504have dire size limitations with respect to buffer sizes.
505.Sh AUTHORS
506.An -nosplit
507.An Ozan Yigit Aq Mt oz@sis.yorku.ca
508and
509.An Richard A. O'Keefe Aq Mt ok@goanna.cs.rmit.OZ.AU .
510.Pp
511GNU-m4 compatibility extensions by
512.An Marc Espie Aq Mt espie@cvs.openbsd.org .
513