xref: /freebsd/usr.bin/login/login.conf (revision d3b764acc6430b5969ada27b751ff4fd99bbea67) 
1# login.conf - login class capabilities database.
2#
3# Remember to rebuild the database after each change to this file:
4#
5#	cap_mkdb /etc/login.conf
6#
7# This file controls resource limits, accounting limits and
8# default user environment settings.
9#
10# $FreeBSD$
11#
12
13# Default settings effectively disable resource limits, see the
14# examples below for a starting point to enable them.
15
16# defaults
17# These settings are used by login(1) by default for classless users
18# Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
19#
20# Note that since a colon ':' is used to separate capability entries,
21# a \c escape sequence must be used to embed a literal colon in the
22# value or name of a capability (see the ``CGETNUM AND CGETSTR SYNTAX
23# AND SEMANTICS'' section of getcap(3) for more escape sequences).
24
25default:\
26	:passwd_format=sha512:\
27	:copyright=/etc/COPYRIGHT:\
28	:welcome=/etc/motd:\
29	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
30	:path=/sbin /bin /usr/sbin /usr/bin /usr/local/sbin /usr/local/bin ~/bin:\
31	:nologin=/var/run/nologin:\
32	:cputime=unlimited:\
33	:datasize=unlimited:\
34	:stacksize=unlimited:\
35	:memorylocked=64K:\
36	:memoryuse=unlimited:\
37	:filesize=unlimited:\
38	:coredumpsize=unlimited:\
39	:openfiles=unlimited:\
40	:maxproc=unlimited:\
41	:sbsize=unlimited:\
42	:vmemoryuse=unlimited:\
43	:swapuse=unlimited:\
44	:pseudoterminals=unlimited:\
45	:kqueues=unlimited:\
46	:umtxp=unlimited:\
47	:priority=0:\
48	:ignoretime@:\
49	:umask=022:
50
51
52#
53# A collection of common class names - forward them all to 'default'
54# (login would normally do this anyway, but having a class name
55#  here suppresses the diagnostic)
56#
57standard:\
58	:tc=default:
59xuser:\
60	:tc=default:
61staff:\
62	:tc=default:
63daemon:\
64	:memorylocked=128M:\
65	:tc=default:
66news:\
67	:tc=default:
68dialer:\
69	:tc=default:
70
71#
72# Root can always login
73#
74# N.B.  login_getpwclass(3) will use this entry for the root account,
75#       in preference to 'default'.
76root:\
77	:ignorenologin:\
78	:memorylocked=unlimited:\
79	:tc=default:
80
81#
82# Russian Users Accounts. Setup proper environment variables.
83#
84russian|Russian Users Accounts:\
85	:charset=UTF-8:\
86	:lang=ru_RU.UTF-8:\
87	:tc=default:
88
89
90######################################################################
91######################################################################
92##
93## Example entries
94##
95######################################################################
96######################################################################
97
98## Example defaults
99## These settings are used by login(1) by default for classless users
100## Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
101#
102#default:\
103#	:cputime=infinity:\
104#	:datasize-cur=22M:\
105#	:stacksize-cur=8M:\
106#	:memorylocked-cur=10M:\
107#	:memoryuse-cur=30M:\
108#	:filesize=infinity:\
109#	:coredumpsize=infinity:\
110#	:maxproc-cur=64:\
111#	:openfiles-cur=64:\
112#	:priority=0:\
113#	:requirehome@:\
114#	:umask=022:\
115#	:tc=auth-defaults:
116#
117#
118##
119## standard - standard user defaults
120##
121#standard:\
122#	:copyright=/etc/COPYRIGHT:\
123#	:welcome=/etc/motd:\
124#	:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
125#	:path=~/bin /bin /usr/bin /usr/local/bin:\
126#	:manpath=/usr/share/man /usr/local/man:\
127#	:nologin=/var/run/nologin:\
128#	:cputime=1h30m:\
129#	:datasize=8M:\
130#	:vmemoryuse=100M:\
131#	:stacksize=2M:\
132#	:memorylocked=4M:\
133#	:memoryuse=8M:\
134#	:filesize=8M:\
135#	:coredumpsize=8M:\
136#	:openfiles=24:\
137#	:maxproc=32:\
138#	:priority=0:\
139#	:requirehome:\
140#	:passwordtime=90d:\
141#	:umask=002:\
142#	:ignoretime@:\
143#	:tc=default:
144#
145#
146##
147## users of X (needs more resources!)
148##
149#xuser:\
150#	:manpath=/usr/share/man /usr/local/man:\
151#	:cputime=4h:\
152#	:datasize=12M:\
153#	:vmemoryuse=infinity:\
154#	:stacksize=4M:\
155#	:filesize=8M:\
156#	:memoryuse=16M:\
157#	:openfiles=32:\
158#	:maxproc=48:\
159#	:tc=standard:
160#
161#
162##
163## Staff users - few restrictions and allow login anytime
164##
165#staff:\
166#	:ignorenologin:\
167#	:ignoretime:\
168#	:requirehome@:\
169#	:accounted@:\
170#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
171#	:umask=022:\
172#	:tc=standard:
173#
174#
175##
176## root - fallback for root logins
177##
178#root:\
179#	:path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
180#	:cputime=infinity:\
181#	:datasize=infinity:\
182#	:stacksize=infinity:\
183#	:memorylocked=infinity:\
184#	:memoryuse=infinity:\
185#	:filesize=infinity:\
186#	:coredumpsize=infinity:\
187#	:openfiles=infinity:\
188#	:maxproc=infinity:\
189#	:memoryuse-cur=32M:\
190#	:maxproc-cur=64:\
191#	:openfiles-cur=1024:\
192#	:priority=0:\
193#	:requirehome@:\
194#	:umask=022:\
195#	:tc=auth-root-defaults:
196#
197#
198##
199## Settings used by /etc/rc
200##
201#daemon:\
202#	:coredumpsize@:\
203#	:coredumpsize-cur=0:\
204#	:datasize=infinity:\
205#	:datasize-cur@:\
206#	:maxproc=512:\
207#	:maxproc-cur@:\
208#	:memoryuse-cur=64M:\
209#	:memorylocked-cur=64M:\
210#	:openfiles=1024:\
211#	:openfiles-cur@:\
212#	:stacksize=16M:\
213#	:stacksize-cur@:\
214#	:tc=default:
215#
216#
217##
218## Settings used by news subsystem
219##
220#news:\
221#	:path=/usr/local/news/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
222#	:cputime=infinity:\
223#	:filesize=128M:\
224#	:datasize-cur=64M:\
225#	:stacksize-cur=32M:\
226#	:coredumpsize-cur=0:\
227#	:maxmemorysize-cur=128M:\
228#	:memorylocked=32M:\
229#	:maxproc=128:\
230#	:openfiles=256:\
231#	:tc=default:
232#
233#
234##
235## The dialer class should be used for a dialup PPP account
236## Welcome messages/news suppressed
237##
238#dialer:\
239#	:hushlogin:\
240#	:requirehome@:\
241#	:cputime=unlimited:\
242#	:filesize=2M:\
243#	:datasize=2M:\
244#	:stacksize=4M:\
245#	:coredumpsize=0:\
246#	:memoryuse=4M:\
247#	:memorylocked=1M:\
248#	:maxproc=16:\
249#	:openfiles=32:\
250#	:tc=standard:
251#
252#
253##
254## Site full-time 24/7 PPP connection
255## - no time accounting, restricted to access via dialin lines
256##
257#site:\
258#	:ignoretime:\
259#	:passwordtime@:\
260#	:refreshtime@:\
261#	:refreshperiod@:\
262#	:sessionlimit@:\
263#	:autodelete@:\
264#	:expireperiod@:\
265#	:graceexpire@:\
266#	:gracetime@:\
267#	:warnexpire@:\
268#	:warnpassword@:\
269#	:idletime@:\
270#	:sessiontime@:\
271#	:daytime@:\
272#	:weektime@:\
273#	:monthtime@:\
274#	:warntime@:\
275#	:accounted@:\
276#	:tc=dialer:\
277#	:tc=staff:
278#
279#
280##
281## Example standard accounting entries for subscriber levels
282##
283#
284#subscriber|Subscribers:\
285#	:accounted:\
286#	:refreshtime=180d:\
287#	:refreshperiod@:\
288#	:sessionlimit@:\
289#	:autodelete=30d:\
290#	:expireperiod=180d:\
291#	:graceexpire=7d:\
292#	:gracetime=10m:\
293#	:warnexpire=7d:\
294#	:warnpassword=7d:\
295#	:idletime=30m:\
296#	:sessiontime=4h:\
297#	:daytime=6h:\
298#	:weektime=40h:\
299#	:monthtime=120h:\
300#	:warntime=4h:\
301#	:tc=standard:
302#
303#
304##
305## Subscriber accounts. These accounts have their login times
306## accounted and have access limits applied.
307##
308#subppp|PPP Subscriber Accounts:\
309#	:tc=dialer:\
310#	:tc=subscriber:
311#
312#
313#subshell|Shell Subscriber Accounts:\
314#	:tc=subscriber:
315#
316##
317## If you want some of the accounts to use traditional UNIX DES based
318## password hashes.
319##
320#des_users:\
321#	:passwd_format=des:\
322#	:tc=default:
323