1.\" Copyright (c) 1980, 1990, 1993 2.\" The Regents of the University of California. All rights reserved. 3.\" Copyright (c) 1976 Board of Trustees of the University of Illinois. 4.\" All rights reserved. 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following conditions 8.\" are met: 9.\" 1. Redistributions of source code must retain the above copyright 10.\" notice, this list of conditions and the following disclaimer. 11.\" 2. Redistributions in binary form must reproduce the above copyright 12.\" notice, this list of conditions and the following disclaimer in the 13.\" documentation and/or other materials provided with the distribution. 14.\" 3. All advertising materials mentioning features or use of this software 15.\" must display the following acknowledgement: 16.\" This product includes software developed by the University of 17.\" California, Berkeley and its contributors. 18.\" 4. Neither the name of the University nor the names of its contributors 19.\" may be used to endorse or promote products derived from this software 20.\" without specific prior written permission. 21.\" 22.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32.\" SUCH DAMAGE. 33.\" 34.\" @(#)indent.1 8.1 (Berkeley) 7/1/93 35.\" 36.Dd July 1, 1993 37.Dt INDENT 1 38.Os BSD 4.2 39.Sh NAME 40.Nm indent 41.Nd indent and format C program source 42.Sh SYNOPSIS 43.Nm indent 44.Op Ar input-file Op Ar output-file 45.Op Fl bad | Fl nbad 46.Op Fl bap | Fl nbap 47.Bk -words 48.Op Fl bbb | Fl nbbb 49.Ek 50.Op Fl \&bc | Fl nbc 51.Op Fl \&bl 52.Op Fl \&br 53.Op Fl c Ns Ar n 54.Op Fl \&cd Ns Ar n 55.Bk -words 56.Op Fl cdb | Fl ncdb 57.Ek 58.Op Fl \&ce | Fl nce 59.Op Fl \&ci Ns Ar n 60.Op Fl cli Ns Ar n 61.Op Fl d Ns Ar n 62.Op Fl \&di Ns Ar n 63.Bk -words 64.Op Fl fc1 | Fl nfc1 65.Ek 66.Op Fl i Ns Ar n 67.Op Fl \&ip | Fl nip 68.Op Fl l Ns Ar n 69.Op Fl \&lc Ns Ar n 70.Op Fl \&lp | Fl nlp 71.Op Fl npro 72.Op Fl pcs | Fl npcs 73.Op Fl psl | Fl npsl 74.Op Fl \&sc | Fl nsc 75.Bk -words 76.Op Fl sob | Fl nsob 77.Ek 78.Op Fl \&st 79.Op Fl troff 80.Op Fl v | Fl \&nv 81.Sh DESCRIPTION 82.Nm Indent 83is a 84.Ar C 85program formatter. It reformats the 86.Ar C 87program in the 88.Ar input-file 89according to the switches. The switches which can be 90specified are described below. They may appear before or after the file 91names. 92.Pp 93.Sy NOTE : 94If you only specify an 95.Ar input-file , 96the formatting is 97done `in-place', that is, the formatted file is written back into 98.Ar input-file 99and a backup copy of 100.Ar input-file 101is written in the current directory. If 102.Ar input-file 103is named 104.Sq Pa /blah/blah/file , 105the backup file is named 106.Pa file.BAK . 107.Pp 108If 109.Ar output-file 110is specified, 111.Nm indent 112checks to make sure it is different from 113.Ar input-file . 114.Pp 115The options listed below control the formatting style imposed by 116.Nm indent . 117.Bl -tag -width Op 118.It Fl bad , nbad 119If 120.Fl bad 121is specified, a blank line is forced after every block of 122declarations. Default: 123.Fl nbad . 124.It Fl bap , nbap 125If 126.Fl bap 127is specified, a blank line is forced after every procedure body. Default: 128.Fl nbap . 129.It Fl bbb , nbbb 130If 131.Fl bbb 132is specified, a blank line is forced before every block comment. Default: 133.Fl nbbb . 134.It Fl \&bc , nbc 135If 136.Fl \&bc 137is specified, then a newline is forced after each comma in a declaration. 138.Fl nbc 139turns off this option. The default is 140.Fl \&bc . 141.It Fl \&br , \&bl 142Specifying 143.Fl \&bl 144lines up compound statements like this: 145.ne 4 146.Bd -literal -offset indent 147if (...) 148{ 149 code 150} 151.Ed 152.Pp 153Specifying 154.Fl \&br 155(the default) makes them look like this: 156.ne 3 157.Bd -literal -offset indent 158if (...) { 159 code 160} 161.Ed 162.Pp 163.It Fl c n 164The column in which comments on code start. The default is 33. 165.It Fl cd n 166The column in which comments on declarations start. The default 167is for these comments to start in the same column as those on code. 168.It Fl cdb , ncdb 169Enables (disables) the placement of comment delimiters on blank lines. With 170this option enabled, comments look like this: 171.Bd -literal -offset indent 172.ne 3 173 /* 174 * this is a comment 175 */ 176.Ed 177.Pp 178Rather than like this: 179.Bd -literal -offset indent 180 /* this is a comment */ 181.Ed 182.Pp 183This only affects block comments, not comments to the right of 184code. The default is 185.Fl cdb . 186.It Fl ce , nce 187Enables (disables) forcing `else's to cuddle up to the immediately preceding 188`}'. The default is 189.Fl \&ce . 190.It Fl \&ci Ns Ar n 191Sets the continuation indent to be 192.Ar n . 193Continuation 194lines will be indented that far from the beginning of the first line of the 195statement. Parenthesized expressions have extra indentation added to 196indicate the nesting, unless 197.Fl \&lp 198is in effect. 199.Fl \&ci 200defaults to the same value as 201.Fl i . 202.It Fl cli Ns Ar n 203Causes case labels to be indented 204.Ar n 205tab stops to the right of the containing 206.Ic switch 207statement. 208.Fl cli0 .5 209causes case labels to be indented half a tab stop. The 210default is 211.Fl cli0 . 212.It Fl d Ns Ar n 213Controls the placement of comments which are not to the 214right of code. The default 215.Fl \&d\&1 216means that such comments are placed one indentation level to the 217left of code. Specifying 218.Fl \&d\&0 219lines up these comments with the code. See the section on comment 220indentation below. 221.It Fl \&di Ns Ar n 222Specifies the indentation, in character positions, from a declaration keyword 223to the following identifier. The default is 224.Fl di16 . 225.It Fl dj , ndj 226.Fl \&dj 227left justifies declarations. 228.Fl ndj 229indents declarations the same as code. The default is 230.Fl ndj . 231.It Fl \&ei , nei 232Enables (disables) special 233.Ic else-if 234processing. If it's enabled, an 235.Ic if 236following an 237.Ic else 238will have the same indentation as the preceding 239.Ic \&if 240statement. 241.It Fl fc1 , nfc1 242Enables (disables) the formatting of comments that start in column 1. 243Often, comments whose leading `/' is in column 1 have been carefully 244hand formatted by the programmer. In such cases, 245.Fl nfc1 246should be 247used. The default is 248.Fl fc1 . 249.It Fl i Ns Ar n 250The number of spaces for one indentation level. The default is 4. 251.It Fl \&ip , nip 252Enables (disables) the indentation of parameter declarations from the left 253margin. The default is 254.Fl \&ip . 255.It Fl l Ns Ar n 256Maximum length of an output line. The default is 75. 257.It Fl \&lp , nlp 258Lines up code surrounded by parenthesis in continuation lines. If a line 259has a left paren which is not closed on that line, then continuation lines 260will be lined up to start at the character position just after the left 261paren. For example, here is how a piece of continued code looks with 262.Fl nlp 263in effect: 264.ne 2 265.Bd -literal -offset indent 266p1 = first_procedure(second_procedure(p2, p3), 267\ \ third_procedure(p4,p5)); 268.Ed 269.Pp 270.ne 5 271With 272.Fl lp 273in effect (the default) the code looks somewhat clearer: 274.Bd -literal -offset indent 275p1\ =\ first_procedure(second_procedure(p2,\ p3), 276\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ third_procedure(p4,p5)); 277.Ed 278.Pp 279.ne 5 280Inserting two more newlines we get: 281.Bd -literal -offset indent 282p1\ =\ first_procedure(second_procedure(p2, 283\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ p3), 284\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ third_procedure(p4 285\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ p5)); 286.Ed 287.It Fl npro 288Causes the profile files, 289.Sq Pa ./.indent.pro 290and 291.Sq Pa ~/.indent.pro , 292to be ignored. 293.It Fl pcs , npcs 294If true 295.Pq Fl pcs 296all procedure calls will have a space inserted between 297the name and the `('. The default is 298.Fl npcs . 299.It Fl psl , npsl 300If true 301.Pq Fl psl 302the names of procedures being defined are placed in 303column 1 \- their types, if any, will be left on the previous lines. The 304default is 305.Fl psl . 306.It Fl \&sc , nsc 307Enables (disables) the placement of asterisks (`*'s) at the left edge of all 308comments. 309.It Fl sob , nsob 310If 311.Fl sob 312is specified, indent will swallow optional blank lines. You can use this to 313get rid of blank lines after declarations. Default: 314.Fl nsob . 315.It Fl \&st 316Causes 317.Nm indent 318to take its input from stdin, and put its output to stdout. 319.It Fl T Ns Ar typename 320Adds 321.Ar typename 322to the list of type keywords. Names accumulate: 323.Fl T 324can be specified more than once. You need to specify all the typenames that 325appear in your program that are defined by 326.Ic typedef 327\- nothing will be 328harmed if you miss a few, but the program won't be formatted as nicely as 329it should. This sounds like a painful thing to have to do, but it's really 330a symptom of a problem in C: 331.Ic typedef 332causes a syntactic change in the 333language and 334.Nm indent 335can't find all 336instances of 337.Ic typedef . 338.It Fl troff 339Causes 340.Nm indent 341to format the program for processing by 342.Xr troff 1 . 343It will produce a fancy 344listing in much the same spirit as 345.Xr vgrind 1 . 346If the output file is not specified, the default is standard output, 347rather than formatting in place. 348.It Fl v , \&nv 349.Fl v 350turns on `verbose' mode; 351.Fl \&nv 352turns it off. When in verbose mode, 353.Nm indent 354reports when it splits one line of input into two or more lines of output, 355and gives some size statistics at completion. The default is 356.Fl \&nv . 357.El 358.Pp 359You may set up your own `profile' of defaults to 360.Nm indent 361by creating a file called 362.Pa .indent.pro 363in your login directory and/or the current directory and including 364whatever switches you like. A `.indent.pro' in the current directory takes 365precedence over the one in your login directory. If 366.Nm indent 367is run and a profile file exists, then it is read to set up the program's 368defaults. Switches on the command line, though, always override profile 369switches. The switches should be separated by spaces, tabs or newlines. 370.Pp 371.Ss Comments 372.Sq Em Box 373.Em comments . 374.Nm Indent 375assumes that any comment with a dash or star immediately after the start of 376comment (that is, `/*\-' or `/**') is a comment surrounded by a box of stars. 377Each line of such a comment is left unchanged, except that its indentation 378may be adjusted to account for the change in indentation of the first line 379of the comment. 380.Pp 381.Em Straight text . 382All other comments are treated as straight text. 383.Nm Indent 384fits as many words (separated by blanks, tabs, or newlines) on a 385line as possible. Blank lines break paragraphs. 386.Pp 387.Ss Comment indentation 388If a comment is on a line with code it is started in the `comment column', 389which is set by the 390.Fl c Ns Ns Ar n 391command line parameter. Otherwise, the comment is started at 392.Ar n 393indentation levels less than where code is currently being placed, where 394.Ar n 395is specified by the 396.Fl d Ns Ns Ar n 397command line parameter. If the code on a line extends past the comment 398column, the comment starts further to the right, and the right margin may be 399automatically extended in extreme cases. 400.Pp 401.Ss Preprocessor lines 402In general, 403.Nm indent 404leaves preprocessor lines alone. The only 405reformatting that it will do is to straighten up trailing comments. It 406leaves embedded comments alone. Conditional compilation 407.Pq Ic #ifdef...#endif 408is recognized and 409.Nm indent 410attempts to correctly 411compensate for the syntactic peculiarities introduced. 412.Pp 413.Ss C syntax 414.Nm Indent 415understands a substantial amount about the syntax of C, but it 416has a `forgiving' parser. It attempts to cope with the usual sorts of 417incomplete and misformed syntax. In particular, the use of macros like: 418.Pp 419.Dl #define forever for(;;) 420.Pp 421is handled properly. 422.Sh ENVIRONMENT 423.Nm Indent 424uses the 425.Ev HOME 426environment variable. 427.Sh FILES 428.Bl -tag -width "./.indent.pro" -compact 429.It Pa ./.indent.pro 430profile file 431.It Pa ~/.indent.pro 432profile file 433.El 434.Sh HISTORY 435The 436.Nm indent 437command appeared in 438.Bx 4.2 . 439.Sh BUGS 440.Nm Indent 441has even more switches than 442.Xr ls 1 . 443.Pp 444.ne 5 445A common mistake that often causes grief is typing: 446.Pp 447.Dl indent *.c 448.Pp 449to the shell in an attempt to indent all the 450.Nm C 451programs in a directory. 452This is probably a bug, not a feature. 453