usr.bin/diff/diff.1

.\" $OpenBSD: diff.1,v 1.47 2015/11/24 19:35:41 jmc Exp $
.\"
.\" Copyright (c) 1980, 1990, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)diff.1	8.1 (Berkeley) 6/30/93
.\" $FreeBSD$
.\"
.Dd April 20, 2017
.Dt DIFF 1
.Os
.Sh NAME
.Nm diff
.Nd differential file and directory comparator
.Sh SYNOPSIS
.Nm diff
.Op Fl abdipTtw
.Oo
.Fl c | e | f |
.Fl n | q | u
.Oc
.Op Fl -brief
.Op Fl -changed-group-format Ar GFMT
.Op Fl -ed
.Op Fl -expand-tabs
.Op Fl -forward-ed
.Op Fl -ignore-all-space
.Op Fl -ignore-case
.Op Fl -ignore-space-change
.Op Fl -initial-tab
.Op Fl -minimal
.Op Fl -no-ignore-file-name-case
.Op Fl -normal
.Op Fl -rcs
.Op Fl -show-c-function
.Op Fl -starting-file
.Op Fl -speed-large-files
.Op Fl -strip-trailing-cr
.Op Fl -tabsize
.Op Fl -text
.Op Fl -unified
.Op Fl I Ar pattern | Fl -ignore-matching-lines Ar pattern
.Op Fl L Ar label | Fl -label Ar label
.Ar file1 file2
.Nm diff
.Op Fl abdilpTtw
.Op Fl I Ar pattern | Fl -ignore-matching-lines Ar pattern
.Op Fl L Ar label | Fl -label Ar label
.Op Fl -brief
.Op Fl -changed-group-format Ar GFMT
.Op Fl -ed
.Op Fl -expand-tabs
.Op Fl -forward-ed
.Op Fl -ignore-all-space
.Op Fl -ignore-case
.Op Fl -ignore-space-change
.Op Fl -initial-tab
.Op Fl -minimal
.Op Fl -no-ignore-file-name-case
.Op Fl -normal
.Op Fl -paginate
.Op Fl -rcs
.Op Fl -show-c-function
.Op Fl -speed-large-files
.Op Fl -starting-file
.Op Fl -strip-trailing-cr
.Op Fl -tabsize
.Op Fl -text
.Fl C Ar number | -context Ar number
.Ar file1 file2
.Nm diff
.Op Fl abdiltw
.Op Fl I Ar pattern | Fl -ignore-matching-lines Ar pattern
.Op Fl -brief
.Op Fl -changed-group-format Ar GFMT
.Op Fl -ed
.Op Fl -expand-tabs
.Op Fl -forward-ed
.Op Fl -ignore-all-space
.Op Fl -ignore-case
.Op Fl -ignore-space-change
.Op Fl -initial-tab
.Op Fl -minimal
.Op Fl -no-ignore-file-name-case
.Op Fl -normal
.Op Fl -paginate
.Op Fl -rcs
.Op Fl -show-c-function
.Op Fl -speed-large-files
.Op Fl -starting-file
.Op Fl -strip-trailing-cr
.Op Fl -tabsize
.Op Fl -text
.Fl D Ar string | Fl -ifdef Ar string
.Ar file1 file2
.Nm diff
.Op Fl abdilpTtw
.Op Fl I Ar pattern | Fl -ignore-matching-lines Ar pattern
.Op Fl L Ar label | Fl -label Ar label
.Op Fl -brief
.Op Fl -changed-group-format Ar GFMT
.Op Fl -ed
.Op Fl -expand-tabs
.Op Fl -forward-ed
.Op Fl -ignore-all-space
.Op Fl -ignore-case
.Op Fl -ignore-space-change
.Op Fl -initial-tab
.Op Fl -minimal
.Op Fl -no-ignore-file-name-case
.Op Fl -normal
.Op Fl -paginate
.Op Fl -rcs
.Op Fl -show-c-function
.Op Fl -speed-large-files
.Op Fl -starting-file
.Op Fl -strip-trailing-cr
.Op Fl -tabsize
.Op Fl -text
.Fl U Ar number | Fl -unified Ar number
.Ar file1 file2
.Nm diff
.Op Fl abdilNPprsTtw
.Oo
.Fl c | e | f |
.Fl n | q | u
.Oc
.Op Fl -brief
.Op Fl -changed-group-format Ar GFMT
.Op Fl -context
.Op Fl -ed
.Op Fl -expand-tabs
.Op Fl -forward-ed
.Op Fl -ignore-all-space
.Op Fl -ignore-case
.Op Fl -ignore-space-change
.Op Fl -initial-tab
.Op Fl -minimal
.Op Fl -new-file
.Op Fl -no-ignore-file-name-case
.Op Fl -normal
.Op Fl -paginate
.Op Fl -rcs
.Op Fl -recursive
.Op Fl -report-identical-files
.Op Fl -show-c-function
.Op Fl -speed-large-files
.Op Fl -strip-trailing-cr
.Op Fl -tabsize
.Op Fl -text
.Op Fl -unidirectional-new-file
.Op Fl -unified
.Op Fl I Ar pattern | Fl -ignore-matching-lines Ar pattern
.Bk -words
.Op Fl L Ar label | Fl -label Ar label
.Op Fl S Ar name | Fl -starting-file Ar name
.Op Fl X Ar file | Fl -exclude-from Ar file
.Op Fl x Ar pattern | Fl -exclude Ar pattern
.Ek
.Ar dir1 dir2
.Sh DESCRIPTION
The
.Nm
utility compares the contents of
.Ar file1
and
.Ar file2
and writes to the standard output the list of changes necessary to
convert one file into the other.
No output is produced if the files are identical.
.Pp
Output options (mutually exclusive):
.Bl -tag -width Ds
.It Fl C Ar number Fl -context Ar number
Like
.Fl c
but produces a diff with
.Ar number
lines of context.
.It Fl c
Produces a diff with 3 lines of context.
With
.Fl c
the output format is modified slightly:
the output begins with identification of the files involved and
their creation dates and then each change is separated
by a line with fifteen
.Li * Ns 's .
The lines removed from
.Ar file1
are marked with
.Sq \&-\ \& ;
those added to
.Ar file2
are marked
.Sq \+\ \& .
Lines which are changed from one file to the other are marked in
both files with
.Sq !\ \& .
Changes which lie within 3 lines of each other are grouped together on
output.
.It Fl D Ar string Fl -ifdef Ar string
Creates a merged version of
.Ar file1
and
.Ar file2
on the standard output, with C preprocessor controls included so that
a compilation of the result without defining
.Ar string
is equivalent to compiling
.Ar file1 ,
while defining
.Ar string
will yield
.Ar file2 .
.It Fl e -ed
Produces output in a form suitable as input for the editor utility,
.Xr ed 1 ,
which can then be used to convert file1 into file2.
.Pp
Extra commands are added to the output when comparing directories with
.Fl e ,
so that the result is a
.Xr sh 1
script for converting text files which are common to the two directories
from their state in
.Ar dir1
to their state in
.Ar dir2 .
.It Fl f -forward-ed
Identical output to that of the
.Fl e
flag, but in reverse order.
It cannot be digested by
.Xr ed 1 .
.It Fl n
Produces a script similar to that of
.Fl e ,
but in the opposite order and with a count of changed lines on each
insert or delete command.
This is the form used by
.Xr rcsdiff 1 .
.It Fl q -brief
Just print a line when the files differ.
Does not output a list of changes.
.It Fl U Ar number Fl -unified Ar number
Like
.Fl u
but produces a diff with
.Ar number
lines of context.
.It Fl u
Produces a
.Em unified
diff with 3 lines of context.
A unified diff is similar to the context diff produced by the
.Fl c
option.
However, unlike with
.Fl c ,
all lines to be changed (added and/or removed) are present in
a single section.
.El
.Pp
Comparison options:
.Bl -tag -width Ds
.It Fl a -text
Treat all files as
.Tn ASCII
text.
Normally
.Nm
will simply print
.Dq Binary files ... differ
if files contain binary characters.
Use of this option forces
.Nm
to produce a diff.
.It Fl b
Causes trailing blanks (spaces and tabs) to be ignored, and other
strings of blanks to compare equal.
.It Fl d -minimal
Try very hard to produce a diff as small as possible.
This may consume a lot of processing power and memory when processing
large files with many changes.
.It Fl I Ar pattern Fl -ignore-matching-lines Ar pattern
Ignores changes, insertions, and deletions whose lines match the
extended regular expression
.Ar pattern .
Multiple
.Fl I
patterns may be specified.
All lines in the change must match some pattern for the change to be
ignored.
See
.Xr re_format 7
for more information on regular expression patterns.
.It Fl i -ignore-case
Ignores the case of letters.
E.g.,
.Dq A
will compare equal to
.Dq a .
.It Fl l -paginate
Pass the output through
.Xr pr 1
to paginate it.
.It Fl L Ar label Fl -label Ar label
Print
.Ar label
instead of the first (and second, if this option is specified twice)
file name and time in the context or unified diff header.
.It Fl p -show-c-function
With unified and context diffs, show with each change
the first 40 characters of the last line before the context beginning
with a letter, an underscore or a dollar sign.
For C source code following standard layout conventions, this will
show the prototype of the function the change applies to.
.It Fl T -initial-tab
Print a tab rather than a space before the rest of the line for the
normal, context or unified output formats.
This makes the alignment of tabs in the line consistent.
.It Fl t -expand-tabs
Will expand tabs in output lines.
Normal or
.Fl c
output adds character(s) to the front of each line which may screw up
the indentation of the original source lines and make the output listing
difficult to interpret.
This option will preserve the original source's indentation.
.It Fl w -ignore-all-blanks
Is similar to
.Fl b -ignore-space-change
but causes whitespace (blanks and tabs) to be totally ignored.
E.g.,
.Dq if (\ \&a == b \&)
will compare equal to
.Dq if(a==b) .
.It Fl -changed-group-format Ar GFMT
Format input groups in the provided
.Pp
the format is a string with special keywords:
.Bl -tag -width %<
.It %<
lines from FILE1
.It %<
lines from FILE2
.El
.It Fl -ignore-file-name-case
ignore case when comparing file names
.It Fl -no-ignore-file-name-case
do not ignore case wen comparing file names (default)
.It Fl -normal
default diff output
.It Fl -speed-large-files
stub option for compatibility with GNU diff
.It Fl -strip-trailing-cr
strip carriage return on input files
.It Fl tabsize Ar number
Number of spaces representing a tab (default 8)
.El
.Pp
Directory comparison options:
.Bl -tag -width Ds
.It Fl N -new-file
If a file is found in only one directory, act as if it was found in the
other directory too but was of zero size.
.It Fl P -unidirectional-new-file
If a file is found only in
.Ar dir2 ,
act as if it was found in
.Ar dir1
too but was of zero size.
.It Fl r -recursive
Causes application of
.Nm
recursively to common subdirectories encountered.
.It Fl S Ar name Fl -starting-file Ar name
Re-starts a directory
.Nm
in the middle, beginning with file
.Ar name .
.It Fl s -report-identical-files
Causes
.Nm
to report files which are the same, which are otherwise not mentioned.
.It Fl X Ar file Fl -exclude-from Ar file
Exclude files and subdirectories from comparison whose basenames match
lines in
.Ar file .
Multiple
.Fl X
options may be specified.
.It Fl x Ar pattern Fl -exclude Ar pattern
Exclude files and subdirectories from comparison whose basenames match
.Ar pattern .
Patterns are matched using shell-style globbing via
.Xr fnmatch 3 .
Multiple
.Fl x
options may be specified.
.El
.Pp
If both arguments are directories,
.Nm
sorts the contents of the directories by name, and then runs the
regular file
.Nm
algorithm, producing a change list,
on text files which are different.
Binary files which differ,
common subdirectories, and files which appear in only one directory
are described as such.
In directory mode only regular files and directories are compared.
If a non-regular file such as a device special file or
.Tn FIFO
is encountered, a diagnostic message is printed.
.Pp
If only one of
.Ar file1
and
.Ar file2
is a directory,
.Nm
is applied to the non-directory file and the file contained in
the directory file with a filename that is the same as the
last component of the non-directory file.
.Pp
If either
.Ar file1
or
.Ar file2
is
.Sq - ,
the standard input is
used in its place.
.Ss Output Style
The default (without
.Fl e ,
.Fl c ,
or
.Fl n -rcs
.\" -C
options)
output contains lines of these forms, where
.Va XX , YY , ZZ , QQ
are line numbers respective of file order.
.Pp
.Bl -tag -width "XX,YYcZZ,QQ" -compact
.It Li XX Ns Ic a Ns Li YY
At (the end of) line
.Va XX
of
.Ar file1 ,
append the contents
of line
.Va YY
of
.Ar file2
to make them equal.
.It Li XX Ns Ic a Ns Li YY,ZZ
Same as above, but append the range of lines,
.Va YY
through
.Va ZZ
of
.Ar file2
to line
.Va XX
of file1.
.It Li XX Ns Ic d Ns Li YY
At line
.Va XX
delete
the line.
The value
.Va YY
tells to which line the change would bring
.Ar file1
in line with
.Ar file2 .
.It Li XX,YY Ns Ic d Ns Li ZZ
Delete the range of lines
.Va XX
through
.Va YY
in
.Ar file1 .
.It Li XX Ns Ic c Ns Li YY
Change the line
.Va XX
in
.Ar file1
to the line
.Va YY
in
.Ar file2 .
.It Li XX,YY Ns Ic c Ns Li ZZ
Replace the range of specified lines with the line
.Va ZZ .
.It Li XX,YY Ns Ic c Ns Li ZZ,QQ
Replace the range
.Va XX , Ns Va YY
from
.Ar file1
with the range
.Va ZZ , Ns Va QQ
from
.Ar file2 .
.El
.Pp
These lines resemble
.Xr ed 1
subcommands to convert
.Ar file1
into
.Ar file2 .
The line numbers before the action letters pertain to
.Ar file1 ;
those after pertain to
.Ar file2 .
Thus, by exchanging
.Ic a
for
.Ic d
and reading the line in reverse order, one can also
determine how to convert
.Ar file2
into
.Ar file1 .
As in
.Xr ed 1 ,
identical
pairs (where num1 = num2) are abbreviated as a single
number.
.Sh FILES
.Bl -tag -width /tmp/diff.XXXXXXXX -compact
.It Pa /tmp/diff. Ns Ar XXXXXXXX
Temporary file used when comparing a device or the standard input.
Note that the temporary file is unlinked as soon as it is created
so it will not show up in a directory listing.
.El
.Sh EXIT STATUS
The
.Nm
utility exits with one of the following values:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 0
No differences were found.
.It 1
Differences were found.
.It >1
An error occurred.
.El
.Sh SEE ALSO
.Xr cmp 1 ,
.Xr comm 1 ,
.Xr diff3 1 ,
.Xr ed 1 ,
.Xr patch 1 ,
.Xr pr 1 ,
.Xr sdiff 1
.Rs
.%A James W. Hunt
.%A M. Douglas McIlroy
.%T "An Algorithm for Differential File Comparison"
.%J Computing Science Technical Report
.%Q Bell Laboratories 41
.%D June 1976
.Re
.Sh STANDARDS
The
.Nm
utility is compliant with the
.St -p1003.1-2008
specification.
.Pp
The flags
.Op Fl aDdIiLlNnPpqSsTtwXx
are extensions to that specification.
.Sh HISTORY
A
.Nm
command appeared in
.At v6 .