xref: /freebsd/usr.bin/compress/compress.1 (revision f5463265955b829775bbb32e1fd0bc11dafc36ce)
1.\" Copyright (c) 1986, 1990, 1993
2.\"	The Regents of the University of California.  All rights reserved.
3.\"
4.\" This code is derived from software contributed to Berkeley by
5.\" James A. Woods, derived from original work by Spencer Thomas
6.\" and Joseph Orost.
7.\"
8.\" Redistribution and use in source and binary forms, with or without
9.\" modification, are permitted provided that the following conditions
10.\" are met:
11.\" 1. Redistributions of source code must retain the above copyright
12.\"    notice, this list of conditions and the following disclaimer.
13.\" 2. Redistributions in binary form must reproduce the above copyright
14.\"    notice, this list of conditions and the following disclaimer in the
15.\"    documentation and/or other materials provided with the distribution.
16.\" 3. Neither the name of the University nor the names of its contributors
17.\"    may be used to endorse or promote products derived from this software
18.\"    without specific prior written permission.
19.\"
20.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30.\" SUCH DAMAGE.
31.\"
32.Dd March 4, 2021
33.Dt COMPRESS 1
34.Os
35.Sh NAME
36.Nm compress ,
37.Nm uncompress
38.Nd compress and expand data
39.Sh SYNOPSIS
40.Nm
41.Op Fl fv
42.Op Fl b Ar bits
43.Op Ar
44.Nm
45.Fl c
46.Op Fl b Ar bits
47.Op Ar file
48.Nm uncompress
49.Op Fl f
50.Op Ar
51.Nm uncompress
52.Fl c
53.Op Ar file
54.Sh DESCRIPTION
55The
56.Nm
57utility reduces the size of files using adaptive Lempel-Ziv coding.
58Each
59.Ar file
60is renamed to the same name plus the extension
61.Pa .Z .
62A
63.Ar file
64argument with a
65.Pa .Z
66extension will be ignored except it will cause an
67error exit after other arguments are processed.
68If compression would not reduce the size of a
69.Ar file ,
70the file is ignored.
71.Pp
72The
73.Nm uncompress
74utility restores compressed files to their original form, renaming the
75files by deleting the
76.Pa .Z
77extensions.
78A file specification need not include the file's
79.Pa .Z
80extension.
81If a file's name in its file system does not have a
82.Pa .Z
83extension, it will not be uncompressed and it will cause
84an error exit after other arguments are processed.
85.Pp
86If renaming the files would cause files to be overwritten and the standard
87input device is a terminal, the user is prompted (on the standard error
88output) for confirmation.
89If prompting is not possible or confirmation is not received, the files
90are not overwritten.
91.Pp
92As many of the modification time, access time, file flags, file mode,
93user ID, and group ID as allowed by permissions are retained in the
94new file.
95.Pp
96If no files are specified or a
97.Ar file
98argument is a single dash
99.Pq Sq Fl ,
100the standard input is compressed or uncompressed to the standard output.
101If either the input and output files are not regular files, the checks for
102reduction in size and file overwriting are not performed, the input file is
103not removed, and the attributes of the input file are not retained
104in the output file.
105.Pp
106The options are as follows:
107.Bl -tag -width ".Fl b Ar bits"
108.It Fl b Ar bits
109The code size (see below) is limited to
110.Ar bits ,
111which must be in the range 9..16.
112The default is 16.
113.It Fl c
114Compressed or uncompressed output is written to the standard output.
115No files are modified.
116The
117.Fl v
118option is ignored.
119Compression is attempted even if the results will be larger than the
120original.
121.It Fl f
122Files are overwritten without prompting for confirmation.
123Also, for
124.Nm compress ,
125files are compressed even if they are not actually reduced in size.
126.It Fl v
127Print the percentage reduction of each file.
128Ignored by
129.Nm uncompress
130or if the
131.Fl c
132option is also used.
133.El
134.Pp
135The
136.Nm
137utility uses a modified Lempel-Ziv algorithm.
138Common substrings in the file are first replaced by 9-bit codes 257 and up.
139When code 512 is reached, the algorithm switches to 10-bit codes and
140continues to use more bits until the
141limit specified by the
142.Fl b
143option or its default is reached.
144.Pp
145After the limit is reached,
146.Nm
147periodically checks the compression ratio.
148If it is increasing,
149.Nm
150continues to use the existing code dictionary.
151However, if the compression ratio decreases,
152.Nm
153discards the table of substrings and rebuilds it from scratch.
154This allows
155the algorithm to adapt to the next "block" of the file.
156.Pp
157The
158.Fl b
159option is unavailable for
160.Nm uncompress
161since the
162.Ar bits
163parameter specified during compression
164is encoded within the output, along with
165a magic number to ensure that neither decompression of random data nor
166recompression of compressed data is attempted.
167.Pp
168The amount of compression obtained depends on the size of the
169input, the number of
170.Ar bits
171per code, and the distribution of common substrings.
172Typically, text such as source code or English is reduced by 50\-60%.
173Compression is generally much better than that achieved by Huffman
174coding (as used in the historical command pack), or adaptive Huffman
175coding (as used in the historical command compact), and takes less
176time to compute.
177.Pp
178If
179.Ar file
180is a soft or hard link
181.Nm
182will replace it with a compressed copy of the file pointed to by the link.
183The link's target file is left uncompressed.
184.Sh EXIT STATUS
185.Ex -std compress uncompress
186.Pp
187The
188.Nm compress
189utility exits 2 if attempting to compress a file would not reduce its size
190and the
191.Fl f
192option was not specified and if no other error occurs.
193.Sh EXAMPLES
194Create a file
195.Pa test_file
196with a single line of text:
197.Bd -literal -offset indent
198echo "This is a test" > test_file
199.Ed
200.Pp
201Try to reduce the size of the file using a 10-bit code and show the exit status:
202.Bd -literal -offset indent
203$ compress -b 10 test_file
204$ echo $?
2052
206.Ed
207.Pp
208Try to compress the file and show compression percentage:
209.Bd -literal -offset indent
210$ compress -v test_file
211test_file: file would grow; left unmodified
212.Ed
213.Pp
214Same as above but forcing compression:
215.Bd -literal -offset indent
216$ compress -f -v test_file
217test_file.Z: 79% expansion
218.Ed
219.Pp
220Compress and uncompress the string
221.Ql hello
222on the fly:
223.Bd -literal -offset indent
224$ echo "hello" | compress | uncompress
225hello
226.Ed
227.Sh SEE ALSO
228.Xr gunzip 1 ,
229.Xr gzexe 1 ,
230.Xr gzip 1 ,
231.Xr zcat 1 ,
232.Xr zmore 1 ,
233.Xr znew 1
234.Rs
235.%A Welch, Terry A.
236.%D June, 1984
237.%T "A Technique for High Performance Data Compression"
238.%J "IEEE Computer"
239.%V 17:6
240.%P pp. 8-19
241.Re
242.Sh STANDARDS
243The
244.Nm compress
245and
246.Nm uncompress
247utilities conform to
248.St -p1003.1-2001 .
249.Sh HISTORY
250The
251.Nm
252command appeared in
253.Bx 4.3 .
254.Sh BUGS
255The program does not handle links well and has no link-handling options.
256.Pp
257Some of these might be considered otherwise-undocumented features.
258.Pp
259.Nm compress :
260If the utility does not compress a file because doing so would not
261reduce its size, and a file of the same name except with an
262.Pa .Z
263extension exists, the named file is not really ignored as stated above;
264it causes a prompt to confirm the overwriting of the file with the extension.
265If the operation is confirmed, that file is deleted.
266.Pp
267.Nm uncompress :
268If an empty file is compressed (using
269.Fl f ) ,
270the resulting
271.Pa .Z
272file is also empty.
273That seems right, but if
274.Nm uncompress
275is then used on that file, an error will occur.
276.Pp
277Both utilities: If a
278.Sq Fl
279argument is used and the utility prompts the user, the standard input
280is taken as the user's reply to the prompt.
281.Pp
282Both utilities:
283If the specified file does not exist, but a similarly-named one with (for
284.Nm compress )
285or without (for
286.Nm uncompress )
287a
288.Pa .Z
289extension does exist, the utility will waste the user's time by not
290immediately emitting an error message about the missing file and
291continuing.
292Instead, it first asks for confirmation to overwrite
293the existing file and then does not overwrite it.
294