xref: /freebsd/usr.bin/cksum/cksum.1 (revision a0b9e2e854027e6ff61fb075a1309dbc71c42b54)
1.\" Copyright (c) 1991, 1993
2.\"	The Regents of the University of California.  All rights reserved.
3.\"
4.\" This code is derived from software contributed to Berkeley by
5.\" the Institute of Electrical and Electronics Engineers, Inc.
6.\"
7.\" Redistribution and use in source and binary forms, with or without
8.\" modification, are permitted provided that the following conditions
9.\" are met:
10.\" 1. Redistributions of source code must retain the above copyright
11.\"    notice, this list of conditions and the following disclaimer.
12.\" 2. Redistributions in binary form must reproduce the above copyright
13.\"    notice, this list of conditions and the following disclaimer in the
14.\"    documentation and/or other materials provided with the distribution.
15.\" 3. Neither the name of the University nor the names of its contributors
16.\"    may be used to endorse or promote products derived from this software
17.\"    without specific prior written permission.
18.\"
19.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29.\" SUCH DAMAGE.
30.\"
31.\"	@(#)cksum.1	8.2 (Berkeley) 4/28/95
32.\" $FreeBSD$
33.\"
34.Dd April 28, 1995
35.Dt CKSUM 1
36.Os
37.Sh NAME
38.Nm cksum ,
39.Nm sum
40.Nd display file checksums and block counts
41.Sh SYNOPSIS
42.Nm
43.Op Fl o Ar 1 | 2 | 3
44.Op Ar
45.Nm sum
46.Op Ar
47.Sh DESCRIPTION
48The
49.Nm
50utility writes to the standard output three whitespace separated
51fields for each input file.
52These fields are a checksum
53.Tn CRC ,
54the total number of octets in the file and the file name.
55If no file name is specified, the standard input is used and no file name
56is written.
57.Pp
58The
59.Nm sum
60utility is identical to the
61.Nm
62utility, except that it defaults to using historic algorithm 1, as
63described below.
64It is provided for compatibility only.
65.Pp
66The options are as follows:
67.Bl -tag -width indent
68.It Fl o
69Use historic algorithms instead of the (superior) default one.
70.Pp
71Algorithm 1 is the algorithm used by historic
72.Bx
73systems as the
74.Xr sum 1
75algorithm and by historic
76.At V
77systems as the
78.Xr sum 1
79algorithm when using the
80.Fl r
81option.
82This is a 16-bit checksum, with a right rotation before each addition;
83overflow is discarded.
84.Pp
85Algorithm 2 is the algorithm used by historic
86.At V
87systems as the
88default
89.Xr sum 1
90algorithm.
91This is a 32-bit checksum, and is defined as follows:
92.Bd -unfilled -offset indent
93s = sum of all bytes;
94r = s % 2^16 + (s % 2^32) / 2^16;
95cksum = (r % 2^16) + r / 2^16;
96.Ed
97.Pp
98Algorithm 3 is what is commonly called the
99.Ql 32bit CRC
100algorithm.
101This is a 32-bit checksum.
102.Pp
103Both algorithm 1 and 2 write to the standard output the same fields as
104the default algorithm except that the size of the file in bytes is
105replaced with the size of the file in blocks.
106For historic reasons, the block size is 1024 for algorithm 1 and 512
107for algorithm 2.
108Partial blocks are rounded up.
109.El
110.Pp
111The default
112.Tn CRC
113used is based on the polynomial used for
114.Tn CRC
115error checking
116in the networking standard
117.St -iso8802-3 .
118The
119.Tn CRC
120checksum encoding is defined by the generating polynomial:
121.Bd -unfilled -offset indent
122G(x) = x^32 + x^26 + x^23 + x^22 + x^16 + x^12 +
123     x^11 + x^10 + x^8 + x^7 + x^5 + x^4 + x^2 + x + 1
124.Ed
125.Pp
126Mathematically, the
127.Tn CRC
128value corresponding to a given file is defined by
129the following procedure:
130.Bd -ragged -offset indent
131The
132.Ar n
133bits to be evaluated are considered to be the coefficients of a mod 2
134polynomial M(x) of degree
135.Ar n Ns \-1 .
136These
137.Ar n
138bits are the bits from the file, with the most significant bit being the most
139significant bit of the first octet of the file and the last bit being the least
140significant bit of the last octet, padded with zero bits (if necessary) to
141achieve an integral number of octets, followed by one or more octets
142representing the length of the file as a binary value, least significant octet
143first.
144The smallest number of octets capable of representing this integer are used.
145.Pp
146M(x) is multiplied by x^32 (i.e., shifted left 32 bits) and divided by
147G(x) using mod 2 division, producing a remainder R(x) of degree <= 31.
148.Pp
149The coefficients of R(x) are considered to be a 32-bit sequence.
150.Pp
151The bit sequence is complemented and the result is the CRC.
152.Ed
153.Sh EXIT STATUS
154.Ex -std cksum sum
155.Sh SEE ALSO
156.Xr md5 1
157.Pp
158The default calculation is identical to that given in pseudo-code
159in the following
160.Tn ACM
161article.
162.Rs
163.%T "Computation of Cyclic Redundancy Checks Via Table Lookup"
164.%A Dilip V. Sarwate
165.%J "Communications of the" Tn ACM
166.%D "August 1988"
167.Re
168.Sh STANDARDS
169The
170.Nm
171utility is expected to conform to
172.St -p1003.2-92 .
173.Sh HISTORY
174The
175.Nm
176utility appeared in
177.Bx 4.4 .
178