16b8c8deeSWill Andrews#!/bin/sh 26b8c8deeSWill Andrews# 36b8c8deeSWill Andrews# Copyright (c) 2005 Poul-Henning Kamp. 46b8c8deeSWill Andrews# All rights reserved. 56b8c8deeSWill Andrews# 66b8c8deeSWill Andrews# Redistribution and use in source and binary forms, with or without 76b8c8deeSWill Andrews# modification, are permitted provided that the following conditions 86b8c8deeSWill Andrews# are met: 96b8c8deeSWill Andrews# 1. Redistributions of source code must retain the above copyright 106b8c8deeSWill Andrews# notice, this list of conditions and the following disclaimer. 116b8c8deeSWill Andrews# 2. Redistributions in binary form must reproduce the above copyright 126b8c8deeSWill Andrews# notice, this list of conditions and the following disclaimer in the 136b8c8deeSWill Andrews# documentation and/or other materials provided with the distribution. 146b8c8deeSWill Andrews# 156b8c8deeSWill Andrews# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 166b8c8deeSWill Andrews# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 176b8c8deeSWill Andrews# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 186b8c8deeSWill Andrews# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 196b8c8deeSWill Andrews# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 206b8c8deeSWill Andrews# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 216b8c8deeSWill Andrews# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 226b8c8deeSWill Andrews# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 236b8c8deeSWill Andrews# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 246b8c8deeSWill Andrews# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 256b8c8deeSWill Andrews# SUCH DAMAGE. 266b8c8deeSWill Andrews# 276b8c8deeSWill Andrews# $FreeBSD$ 286b8c8deeSWill Andrews# 296b8c8deeSWill Andrews 306b8c8deeSWill Andrewsset -e 316b8c8deeSWill Andrews 326b8c8deeSWill Andrews####################################################################### 336b8c8deeSWill Andrews# 346b8c8deeSWill Andrews# Setup default values for all controlling variables. 356b8c8deeSWill Andrews# These values can be overridden from the config file(s) 366b8c8deeSWill Andrews# 376b8c8deeSWill Andrews####################################################################### 386b8c8deeSWill Andrews 396b8c8deeSWill Andrews# Name of this NanoBSD build. (Used to construct workdir names) 406b8c8deeSWill AndrewsNANO_NAME=full 416b8c8deeSWill Andrews 426b8c8deeSWill Andrews# Source tree directory 436b8c8deeSWill AndrewsNANO_SRC=/usr/src 446b8c8deeSWill Andrews 456b8c8deeSWill Andrews# Where nanobsd additional files live under the source tree 466b8c8deeSWill AndrewsNANO_TOOLS=tools/tools/nanobsd 476b8c8deeSWill Andrews 4818803951SWarner Losh# Where cust_pkgng() finds packages to install 496b8c8deeSWill AndrewsNANO_PACKAGE_DIR=${NANO_SRC}/${NANO_TOOLS}/Pkg 506b8c8deeSWill AndrewsNANO_PACKAGE_LIST="*" 516b8c8deeSWill Andrews 526b8c8deeSWill Andrews# where package metadata gets placed 536b8c8deeSWill AndrewsNANO_PKG_META_BASE=/var/db 546b8c8deeSWill Andrews 556b8c8deeSWill Andrews# Object tree directory 566b8c8deeSWill Andrews# default is subdir of /usr/obj 576b8c8deeSWill Andrews#NANO_OBJ="" 586b8c8deeSWill Andrews 596b8c8deeSWill Andrews# The directory to put the final images 606b8c8deeSWill Andrews# default is ${NANO_OBJ} 616b8c8deeSWill Andrews#NANO_DISKIMGDIR="" 626b8c8deeSWill Andrews 636b8c8deeSWill Andrews# Make & parallel Make 646b8c8deeSWill AndrewsNANO_MAKE="make" 656b8c8deeSWill AndrewsNANO_PMAKE="make -j 3" 666b8c8deeSWill Andrews 676b8c8deeSWill Andrews# The default name for any image we create. 686b8c8deeSWill AndrewsNANO_IMGNAME="_.disk.full" 696b8c8deeSWill Andrews 706b8c8deeSWill Andrews# Options to put in make.conf during buildworld only 716b8c8deeSWill AndrewsCONF_BUILD=' ' 726b8c8deeSWill Andrews 736b8c8deeSWill Andrews# Options to put in make.conf during installworld only 746b8c8deeSWill AndrewsCONF_INSTALL=' ' 756b8c8deeSWill Andrews 766b8c8deeSWill Andrews# Options to put in make.conf during both build- & installworld. 776b8c8deeSWill AndrewsCONF_WORLD=' ' 786b8c8deeSWill Andrews 796b8c8deeSWill Andrews# Kernel config file to use 806b8c8deeSWill AndrewsNANO_KERNEL=GENERIC 816b8c8deeSWill Andrews 826b8c8deeSWill Andrews# Kernel modules to install. If empty, no modules are installed. 836b8c8deeSWill Andrews# Use "default" to install all built modules. 846b8c8deeSWill AndrewsNANO_MODULES= 856b8c8deeSWill Andrews 866b8c8deeSWill Andrews# Customize commands. 876b8c8deeSWill AndrewsNANO_CUSTOMIZE="" 886b8c8deeSWill Andrews 896b8c8deeSWill Andrews# Late customize commands. 906b8c8deeSWill AndrewsNANO_LATE_CUSTOMIZE="" 916b8c8deeSWill Andrews 926b8c8deeSWill Andrews# Newfs paramters to use 936b8c8deeSWill AndrewsNANO_NEWFS="-b 4096 -f 512 -i 8192 -U" 946b8c8deeSWill Andrews 956b8c8deeSWill Andrews# The drive name of the media at runtime 96*4c1ca03bSWarner LoshNANO_DRIVE=ada0 976b8c8deeSWill Andrews 986b8c8deeSWill Andrews# Target media size in 512 bytes sectors 996b8c8deeSWill AndrewsNANO_MEDIASIZE=2000000 1006b8c8deeSWill Andrews 1016b8c8deeSWill Andrews# Number of code images on media (1 or 2) 1026b8c8deeSWill AndrewsNANO_IMAGES=2 1036b8c8deeSWill Andrews 1046b8c8deeSWill Andrews# 0 -> Leave second image all zeroes so it compresses better. 1056b8c8deeSWill Andrews# 1 -> Initialize second image with a copy of the first 1066b8c8deeSWill AndrewsNANO_INIT_IMG2=1 1076b8c8deeSWill Andrews 1086b8c8deeSWill Andrews# Size of code file system in 512 bytes sectors 1096b8c8deeSWill Andrews# If zero, size will be as large as possible. 1106b8c8deeSWill AndrewsNANO_CODESIZE=0 1116b8c8deeSWill Andrews 1126b8c8deeSWill Andrews# Size of configuration file system in 512 bytes sectors 1136b8c8deeSWill Andrews# Cannot be zero. 1146b8c8deeSWill AndrewsNANO_CONFSIZE=2048 1156b8c8deeSWill Andrews 1166b8c8deeSWill Andrews# Size of data file system in 512 bytes sectors 1176b8c8deeSWill Andrews# If zero: no partition configured. 1186b8c8deeSWill Andrews# If negative: max size possible 1196b8c8deeSWill AndrewsNANO_DATASIZE=0 1206b8c8deeSWill Andrews 1216b8c8deeSWill Andrews# Size of the /etc ramdisk in 512 bytes sectors 1226b8c8deeSWill AndrewsNANO_RAM_ETCSIZE=10240 1236b8c8deeSWill Andrews 1246b8c8deeSWill Andrews# Size of the /tmp+/var ramdisk in 512 bytes sectors 1256b8c8deeSWill AndrewsNANO_RAM_TMPVARSIZE=10240 1266b8c8deeSWill Andrews 1276b8c8deeSWill Andrews# Media geometry, only relevant if bios doesn't understand LBA. 1286b8c8deeSWill AndrewsNANO_SECTS=63 1296b8c8deeSWill AndrewsNANO_HEADS=16 1306b8c8deeSWill Andrews 1316b8c8deeSWill Andrews# boot0 flags/options and configuration 1326b8c8deeSWill AndrewsNANO_BOOT0CFG="-o packet -s 1 -m 3" 1336b8c8deeSWill AndrewsNANO_BOOTLOADER="boot/boot0sio" 1346b8c8deeSWill Andrews 1356b8c8deeSWill Andrews# boot2 flags/options 1366b8c8deeSWill Andrews# default force serial console 137a9598aaeSWarner LoshNANO_BOOT2CFG="-h -S115200" 1386b8c8deeSWill Andrews 1396b8c8deeSWill Andrews# Backing type of md(4) device 1406b8c8deeSWill Andrews# Can be "file" or "swap" 1416b8c8deeSWill AndrewsNANO_MD_BACKING="file" 1426b8c8deeSWill Andrews 1436b8c8deeSWill Andrews# for swap type md(4) backing, write out the mbr only 1446b8c8deeSWill AndrewsNANO_IMAGE_MBRONLY=true 1456b8c8deeSWill Andrews 1466b8c8deeSWill Andrews# Progress Print level 1476b8c8deeSWill AndrewsPPLEVEL=3 1486b8c8deeSWill Andrews 1496b8c8deeSWill Andrews# Set NANO_LABEL to non-blank to form the basis for using /dev/ufs/label 1506b8c8deeSWill Andrews# in preference to /dev/${NANO_DRIVE} 1516b8c8deeSWill Andrews# Root partition will be ${NANO_LABEL}s{1,2} 1526b8c8deeSWill Andrews# /cfg partition will be ${NANO_LABEL}s3 1536b8c8deeSWill Andrews# /data partition will be ${NANO_LABEL}s4 1546b8c8deeSWill AndrewsNANO_LABEL="" 1557b77d3eaSWarner LoshNANO_SLICE_ROOT=s1 1567b77d3eaSWarner LoshNANO_SLICE_ALTROOT=s2 1577b77d3eaSWarner LoshNANO_SLICE_CFG=s3 1587b77d3eaSWarner LoshNANO_SLICE_DATA=s4 1597b77d3eaSWarner Losh 16019edffefSWarner Losh# Default ownwership for nopriv build 16119edffefSWarner LoshNANO_DEF_UNAME=root 16219edffefSWarner LoshNANO_DEF_GNAME=wheel 1636b8c8deeSWill Andrews 1646b8c8deeSWill Andrews####################################################################### 1656b8c8deeSWill Andrews# Architecture to build. Corresponds to TARGET_ARCH in a buildworld. 1666b8c8deeSWill Andrews# Unfortunately, there's no way to set TARGET at this time, and it 167d07833f9SWarner Losh# conflates the two, so architectures where TARGET != TARGET_ARCH and 168d07833f9SWarner Losh# TARGET can't be guessed from TARGET_ARCH do not work. This defaults 169d07833f9SWarner Losh# to the arch of the current machine. 1706b8c8deeSWill AndrewsNANO_ARCH=`uname -p` 1716b8c8deeSWill Andrews 172d07833f9SWarner Losh# CPUTYPE defaults to "" which is the default when CPUTYPE isn't 173d07833f9SWarner Losh# defined. 174d07833f9SWarner LoshNANO_CPUTYPE="" 175d07833f9SWarner Losh 1766b8c8deeSWill Andrews# Directory to populate /cfg from 1776b8c8deeSWill AndrewsNANO_CFGDIR="" 1786b8c8deeSWill Andrews 1796b8c8deeSWill Andrews# Directory to populate /data from 1806b8c8deeSWill AndrewsNANO_DATADIR="" 1816b8c8deeSWill Andrews 182a9d9c49fSWarner Losh# We don't need SRCCONF or SRC_ENV_CONF. NanoBSD puts everything we 183a9d9c49fSWarner Losh# need for the build in files included with __MAKE_CONF. Override in your 184a9d9c49fSWarner Losh# config file if you really must. We set them unconditionally here, though 185a9d9c49fSWarner Losh# in case they are stray in the build environment 186a9d9c49fSWarner LoshSRCCONF=/dev/null 187a9d9c49fSWarner LoshSRC_ENV_CONF=/dev/null 1886b8c8deeSWill Andrews 1896b8c8deeSWill Andrews####################################################################### 1906b8c8deeSWill Andrews# 1916b8c8deeSWill Andrews# The functions which do the real work. 1926b8c8deeSWill Andrews# Can be overridden from the config file(s) 1936b8c8deeSWill Andrews# 1946b8c8deeSWill Andrews####################################################################### 1956b8c8deeSWill Andrews 1961934c7aaSWarner Losh# Export values into the shell. Must use { } instead of ( ) like 1971934c7aaSWarner Losh# other functions to avoid a subshell. 1981934c7aaSWarner Losh# We set __MAKE_CONF as a global since it is easier to get quoting 1991934c7aaSWarner Losh# right for paths with spaces in them. 2001934c7aaSWarner Loshmake_export ( ) { 2011934c7aaSWarner Losh # Similar to export_var, except puts the data out to stdout 2021934c7aaSWarner Losh var=$1 2031934c7aaSWarner Losh eval val=\$$var 2041934c7aaSWarner Losh echo "Setting variable: $var=\"$val\"" 2051934c7aaSWarner Losh export $1 2061934c7aaSWarner Losh} 2071934c7aaSWarner Losh 2081934c7aaSWarner Loshnano_make_build_env ( ) { 2091934c7aaSWarner Losh __MAKE_CONF="${NANO_MAKE_CONF_BUILD}" 2101934c7aaSWarner Losh make_export __MAKE_CONF 2111934c7aaSWarner Losh} 2121934c7aaSWarner Losh 2131934c7aaSWarner Loshnano_make_install_env ( ) { 2141934c7aaSWarner Losh __MAKE_CONF="${NANO_MAKE_CONF_INSTALL}" 2151934c7aaSWarner Losh make_export __MAKE_CONF 2161934c7aaSWarner Losh} 2171934c7aaSWarner Losh 2181934c7aaSWarner Losh# Extra environment variables for kernel builds 2191934c7aaSWarner Loshnano_make_kernel_env ( ) { 2201934c7aaSWarner Losh if [ -f ${NANO_KERNEL} ] ; then 2211934c7aaSWarner Losh KERNCONFDIR="$(realpath $(dirname ${NANO_KERNEL}))" 2221934c7aaSWarner Losh KERNCONF="$(basename ${NANO_KERNEL})" 2231934c7aaSWarner Losh make_export KERNCONFDIR 2241934c7aaSWarner Losh make_export KERNCONF 2251934c7aaSWarner Losh else 2261934c7aaSWarner Losh export KERNCONF="${NANO_KERNEL}" 2271934c7aaSWarner Losh make_export KERNCONF 2281934c7aaSWarner Losh fi 2291934c7aaSWarner Losh} 2301934c7aaSWarner Losh 2311934c7aaSWarner Loshnano_global_make_env ( ) ( 232849f5467SWarner Losh # global settings for the make.conf file, if set 233849f5467SWarner Losh [ -z "${NANO_ARCH}" ] || echo TARGET_ARCH="${NANO_ARCH}" 234849f5467SWarner Losh [ -z "${NANO_CPUTYPE}" ] || echo TARGET_CPUTYPE="${NANO_CPUTYPE}" 2351934c7aaSWarner Losh) 2361934c7aaSWarner Losh 2376b8c8deeSWill Andrews# rm doesn't know -x prior to FreeBSD 10, so cope with a variety of build 238849f5467SWarner Losh# hosts for now. This will go away when support in the base goes away. 239849f5467SWarner Loshrm ( ) { 240849f5467SWarner Losh echo "NANO RM $*" 2416b8c8deeSWill Andrews case $(uname -r) in 242849f5467SWarner Losh 7*|8*|9*) command rm $* ;; 243849f5467SWarner Losh *) command rm -x $* ;; 2446b8c8deeSWill Andrews esac 2456b8c8deeSWill Andrews} 2466b8c8deeSWill Andrews 24719edffefSWarner Losh# 24819edffefSWarner Losh# Create empty files in the target tree, and record the fact. All paths 24919edffefSWarner Losh# are relative to NANO_WORLDDIR. 25019edffefSWarner Losh# 25119edffefSWarner Loshtgt_touch ( ) ( 25219edffefSWarner Losh 25319edffefSWarner Losh cd "${NANO_WORLDDIR}" 25419edffefSWarner Losh for i; do 25519edffefSWarner Losh touch $i 25619edffefSWarner Losh echo "./${i} type=file" >> ${NANO_METALOG} 25719edffefSWarner Losh done 25819edffefSWarner Losh) 25919edffefSWarner Losh 26019edffefSWarner Losh# 26119edffefSWarner Losh# Convert a directory into a symlink. Takes two arguments, the 26219edffefSWarner Losh# current directory and what it should become a symlink to. The 26319edffefSWarner Losh# directory is removed and a symlink is created. If we're doing 26419edffefSWarner Losh# a nopriv build, then append this fact to the metalog 26519edffefSWarner Losh# 26619edffefSWarner Loshtgt_dir2symlink () ( 26719edffefSWarner Losh dir=$1 26819edffefSWarner Losh symlink=$2 26919edffefSWarner Losh 27019edffefSWarner Losh cd "${NANO_WORLDDIR}" 27119edffefSWarner Losh rm -rf "$dir" 27219edffefSWarner Losh ln -s "$symlink" "$dir" 2730a852830SWarner Losh if [ -n "$NANO_METALOG" ]; then 27419edffefSWarner Losh echo "./${dir} type=link mode=0777 link=${symlink}" >> ${NANO_METALOG} 27519edffefSWarner Losh fi 27619edffefSWarner Losh) 27719edffefSWarner Losh 2786b8c8deeSWill Andrews# run in the world chroot, errors fatal 2791934c7aaSWarner LoshCR ( ) { 2801934c7aaSWarner Losh chroot "${NANO_WORLDDIR}" /bin/sh -exc "$*" 2816b8c8deeSWill Andrews} 2826b8c8deeSWill Andrews 2836b8c8deeSWill Andrews# run in the world chroot, errors not fatal 2841934c7aaSWarner LoshCR0 ( ) { 2851934c7aaSWarner Losh chroot "${NANO_WORLDDIR}" /bin/sh -c "$*" || true 2866b8c8deeSWill Andrews} 2876b8c8deeSWill Andrews 2886b8c8deeSWill Andrewsnano_cleanup ( ) ( 289849f5467SWarner Losh [ $? -eq 0 ] || echo "Error encountered. Check for errors in last log file." 1>&2 2906b8c8deeSWill Andrews exit $? 2916b8c8deeSWill Andrews) 2926b8c8deeSWill Andrews 2936b8c8deeSWill Andrewsclean_build ( ) ( 2946b8c8deeSWill Andrews pprint 2 "Clean and create object directory (${MAKEOBJDIRPREFIX})" 2956b8c8deeSWill Andrews 296849f5467SWarner Losh if ! rm -rf ${MAKEOBJDIRPREFIX}/ > /dev/null 2>&1 ; then 2976b8c8deeSWill Andrews chflags -R noschg ${MAKEOBJDIRPREFIX}/ 298849f5467SWarner Losh rm -r ${MAKEOBJDIRPREFIX}/ 2996b8c8deeSWill Andrews fi 3006b8c8deeSWill Andrews) 3016b8c8deeSWill Andrews 3026b8c8deeSWill Andrewsmake_conf_build ( ) ( 3036b8c8deeSWill Andrews pprint 2 "Construct build make.conf ($NANO_MAKE_CONF_BUILD)" 3046b8c8deeSWill Andrews 3056b8c8deeSWill Andrews mkdir -p ${MAKEOBJDIRPREFIX} 3066b8c8deeSWill Andrews printenv > ${MAKEOBJDIRPREFIX}/_.env 3076b8c8deeSWill Andrews 3081934c7aaSWarner Losh # Make sure we get all the global settings that NanoBSD wants 3091934c7aaSWarner Losh # in addition to the user's global settings 3101934c7aaSWarner Losh ( 3111934c7aaSWarner Losh nano_global_make_env 3121934c7aaSWarner Losh echo "${CONF_WORLD}" 3131934c7aaSWarner Losh echo "${CONF_BUILD}" 3141934c7aaSWarner Losh ) > ${NANO_MAKE_CONF_BUILD} 3156b8c8deeSWill Andrews) 3166b8c8deeSWill Andrews 3176b8c8deeSWill Andrewsbuild_world ( ) ( 3186b8c8deeSWill Andrews pprint 2 "run buildworld" 3196b8c8deeSWill Andrews pprint 3 "log: ${MAKEOBJDIRPREFIX}/_.bw" 3206b8c8deeSWill Andrews 3211934c7aaSWarner Losh ( 3221934c7aaSWarner Losh nano_make_build_env 3231934c7aaSWarner Losh set -o xtrace 3241934c7aaSWarner Losh cd "${NANO_SRC}" 3251934c7aaSWarner Losh ${NANO_PMAKE} buildworld 3261934c7aaSWarner Losh ) > ${MAKEOBJDIRPREFIX}/_.bw 2>&1 3276b8c8deeSWill Andrews) 3286b8c8deeSWill Andrews 3296b8c8deeSWill Andrewsbuild_kernel ( ) ( 3306b8c8deeSWill Andrews local extra 3316b8c8deeSWill Andrews 3326b8c8deeSWill Andrews pprint 2 "build kernel ($NANO_KERNEL)" 3336b8c8deeSWill Andrews pprint 3 "log: ${MAKEOBJDIRPREFIX}/_.bk" 3346b8c8deeSWill Andrews 3356b8c8deeSWill Andrews ( 3361934c7aaSWarner Losh nano_make_build_env 3371934c7aaSWarner Losh nano_make_kernel_env 3386b8c8deeSWill Andrews 3396b8c8deeSWill Andrews # Note: We intentionally build all modules, not only the ones in 3406b8c8deeSWill Andrews # NANO_MODULES so the built world can be reused by multiple images. 3411934c7aaSWarner Losh # Although MODULES_OVERRIDE can be defined in the kenrel config 3421934c7aaSWarner Losh # file to override this behavior. Just set NANO_MODULES=default. 3431934c7aaSWarner Losh set -o xtrace 3441934c7aaSWarner Losh cd "${NANO_SRC}" 3451934c7aaSWarner Losh ${NANO_PMAKE} buildkernel 3466b8c8deeSWill Andrews ) > ${MAKEOBJDIRPREFIX}/_.bk 2>&1 3476b8c8deeSWill Andrews) 3486b8c8deeSWill Andrews 3496b8c8deeSWill Andrewsclean_world ( ) ( 3506b8c8deeSWill Andrews if [ "${NANO_OBJ}" != "${MAKEOBJDIRPREFIX}" ]; then 3516b8c8deeSWill Andrews pprint 2 "Clean and create object directory (${NANO_OBJ})" 352849f5467SWarner Losh if ! rm -rf ${NANO_OBJ}/ > /dev/null 2>&1 ; then 3536b8c8deeSWill Andrews chflags -R noschg ${NANO_OBJ} 354849f5467SWarner Losh rm -r ${NANO_OBJ}/ 3556b8c8deeSWill Andrews fi 3561934c7aaSWarner Losh mkdir -p "${NANO_OBJ}" "${NANO_WORLDDIR}" 3576b8c8deeSWill Andrews printenv > ${NANO_OBJ}/_.env 3586b8c8deeSWill Andrews else 3596b8c8deeSWill Andrews pprint 2 "Clean and create world directory (${NANO_WORLDDIR})" 360849f5467SWarner Losh if ! rm -rf "${NANO_WORLDDIR}/" > /dev/null 2>&1 ; then 3611934c7aaSWarner Losh chflags -R noschg "${NANO_WORLDDIR}" 362849f5467SWarner Losh rm -rf "${NANO_WORLDDIR}/" 3636b8c8deeSWill Andrews fi 3641934c7aaSWarner Losh mkdir -p "${NANO_WORLDDIR}" 3656b8c8deeSWill Andrews fi 3666b8c8deeSWill Andrews) 3676b8c8deeSWill Andrews 3686b8c8deeSWill Andrewsmake_conf_install ( ) ( 3696b8c8deeSWill Andrews pprint 2 "Construct install make.conf ($NANO_MAKE_CONF_INSTALL)" 3706b8c8deeSWill Andrews 3711934c7aaSWarner Losh # Make sure we get all the global settings that NanoBSD wants 3721934c7aaSWarner Losh # in addition to the user's global settings 3731934c7aaSWarner Losh ( 3741934c7aaSWarner Losh nano_global_make_env 3751934c7aaSWarner Losh echo "${CONF_WORLD}" 3761934c7aaSWarner Losh echo "${CONF_INSTALL}" 377849f5467SWarner Losh if [ -n "${NANO_NOPRIV_BUILD}" ]; then 378c275d9ecSWarner Losh echo NO_ROOT=t 379c275d9ecSWarner Losh echo METALOG=${NANO_METALOG} 380c275d9ecSWarner Losh fi 3811934c7aaSWarner Losh ) > ${NANO_MAKE_CONF_INSTALL} 3826b8c8deeSWill Andrews) 3836b8c8deeSWill Andrews 3846b8c8deeSWill Andrewsinstall_world ( ) ( 3856b8c8deeSWill Andrews pprint 2 "installworld" 3866b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.iw" 3876b8c8deeSWill Andrews 3881934c7aaSWarner Losh ( 3891934c7aaSWarner Losh nano_make_install_env 3901934c7aaSWarner Losh set -o xtrace 3911934c7aaSWarner Losh cd "${NANO_SRC}" 3921934c7aaSWarner Losh ${NANO_MAKE} installworld DESTDIR="${NANO_WORLDDIR}" 3931934c7aaSWarner Losh chflags -R noschg "${NANO_WORLDDIR}" 3941934c7aaSWarner Losh ) > ${NANO_OBJ}/_.iw 2>&1 3956b8c8deeSWill Andrews) 3966b8c8deeSWill Andrews 3976b8c8deeSWill Andrewsinstall_etc ( ) ( 3986b8c8deeSWill Andrews 3996b8c8deeSWill Andrews pprint 2 "install /etc" 4006b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.etc" 4016b8c8deeSWill Andrews 4021934c7aaSWarner Losh ( 4031934c7aaSWarner Losh nano_make_install_env 4041934c7aaSWarner Losh set -o xtrace 4051934c7aaSWarner Losh cd "${NANO_SRC}" 4061934c7aaSWarner Losh ${NANO_MAKE} distribution DESTDIR="${NANO_WORLDDIR}" 4076b8c8deeSWill Andrews # make.conf doesn't get created by default, but some ports need it 4086b8c8deeSWill Andrews # so they can spam it. 4091934c7aaSWarner Losh cp /dev/null "${NANO_WORLDDIR}"/etc/make.conf 4101934c7aaSWarner Losh ) > ${NANO_OBJ}/_.etc 2>&1 4116b8c8deeSWill Andrews) 4126b8c8deeSWill Andrews 4136b8c8deeSWill Andrewsinstall_kernel ( ) ( 4146b8c8deeSWill Andrews local extra 4156b8c8deeSWill Andrews 4166b8c8deeSWill Andrews pprint 2 "install kernel ($NANO_KERNEL)" 4176b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.ik" 4186b8c8deeSWill Andrews 4196b8c8deeSWill Andrews ( 4206b8c8deeSWill Andrews 4211934c7aaSWarner Losh nano_make_install_env 4221934c7aaSWarner Losh nano_make_kernel_env 4231934c7aaSWarner Losh 4246b8c8deeSWill Andrews if [ "${NANO_MODULES}" != "default" ]; then 4251934c7aaSWarner Losh MODULES_OVERRIDE="${NANO_MODULES}" 4261934c7aaSWarner Losh make_export MODULES_OVERRIDE 4276b8c8deeSWill Andrews fi 4286b8c8deeSWill Andrews 4291934c7aaSWarner Losh set -o xtrace 4301934c7aaSWarner Losh cd "${NANO_SRC}" 4311934c7aaSWarner Losh ${NANO_MAKE} installkernel DESTDIR="${NANO_WORLDDIR}" 4321934c7aaSWarner Losh 4336b8c8deeSWill Andrews ) > ${NANO_OBJ}/_.ik 2>&1 4346b8c8deeSWill Andrews) 4356b8c8deeSWill Andrews 4366b8c8deeSWill Andrewsnative_xtools ( ) ( 4376b8c8deeSWill Andrews print 2 "Installing the optimized native build tools for cross env" 4386b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.native_xtools" 4396b8c8deeSWill Andrews 4401934c7aaSWarner Losh ( 4411934c7aaSWarner Losh 4421934c7aaSWarner Losh nano_make_install_env 4431934c7aaSWarner Losh set -o xtrace 4441934c7aaSWarner Losh cd "${NANO_SRC}" 4451934c7aaSWarner Losh ${NANO_MAKE} native-xtools DESTDIR="${NANO_WORLDDIR}" 4461934c7aaSWarner Losh 4471934c7aaSWarner Losh ) > ${NANO_OBJ}/_.native_xtools 2>&1 4486b8c8deeSWill Andrews) 4496b8c8deeSWill Andrews 45019edffefSWarner Losh# 45119edffefSWarner Losh# Run the requested set of customization scripts, run after we've 45219edffefSWarner Losh# done an installworld, installed the etc files, installed the kernel 45319edffefSWarner Losh# and tweaked them in the standard way. 45419edffefSWarner Losh# 4556b8c8deeSWill Andrewsrun_customize ( ) ( 4566b8c8deeSWill Andrews 4576b8c8deeSWill Andrews pprint 2 "run customize scripts" 4586b8c8deeSWill Andrews for c in $NANO_CUSTOMIZE 4596b8c8deeSWill Andrews do 4606b8c8deeSWill Andrews pprint 2 "customize \"$c\"" 4616b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.cust.$c" 4626b8c8deeSWill Andrews pprint 4 "`type $c`" 4636b8c8deeSWill Andrews ( set -x ; $c ) > ${NANO_OBJ}/_.cust.$c 2>&1 4646b8c8deeSWill Andrews done 4656b8c8deeSWill Andrews) 4666b8c8deeSWill Andrews 46719edffefSWarner Losh# 46819edffefSWarner Losh# Run any last-minute customization commands after we've had a chance to 46919edffefSWarner Losh# setup nanobsd, prune empty dirs from /usr, etc 47019edffefSWarner Losh# 4716b8c8deeSWill Andrewsrun_late_customize ( ) ( 4726b8c8deeSWill Andrews 4736b8c8deeSWill Andrews pprint 2 "run late customize scripts" 4746b8c8deeSWill Andrews for c in $NANO_LATE_CUSTOMIZE 4756b8c8deeSWill Andrews do 4766b8c8deeSWill Andrews pprint 2 "late customize \"$c\"" 4776b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.late_cust.$c" 4786b8c8deeSWill Andrews pprint 4 "`type $c`" 4796b8c8deeSWill Andrews ( set -x ; $c ) > ${NANO_OBJ}/_.late_cust.$c 2>&1 4806b8c8deeSWill Andrews done 4816b8c8deeSWill Andrews) 4826b8c8deeSWill Andrews 48319edffefSWarner Losh# 48419edffefSWarner Losh# Hook called after we run all the late customize commands, but 48519edffefSWarner Losh# before we invoke the disk imager. The nopriv build uses it to 48619edffefSWarner Losh# read in the meta log, apply the changes other parts of nanobsd 48719edffefSWarner Losh# have been recording their actions. It's not anticipated that 48819edffefSWarner Losh# a user's cfg file would override this. 48919edffefSWarner Losh# 49019edffefSWarner Loshfixup_before_diskimage ( ) ( 49119edffefSWarner Losh 49219edffefSWarner Losh # Run the deduplication script that takes the matalog journal and 49319edffefSWarner Losh # combines multiple entries for the same file (see source for 49419edffefSWarner Losh # details). We take the extra step of removing the size keywords. This 49519edffefSWarner Losh # script, and many of the user scripts, copies, appeneds and otherwise 49619edffefSWarner Losh # modifies files in the build, changing their sizes. These actions are 49719edffefSWarner Losh # impossible to trap, so go ahead remove the size= keyword. For this 49819edffefSWarner Losh # narrow use, it doesn't buy us any protection and just gets in the way. 49919edffefSWarner Losh # The dedup tool's output must be sorted due to limitations in awk. 5000a852830SWarner Losh if [ -n "${NANO_METALOG}" ]; then 50119edffefSWarner Losh pprint 2 "Fixing metalog" 50219edffefSWarner Losh cp ${NANO_METALOG} ${NANO_METALOG}.pre 50345b2ffd0SWarner Losh echo "/set uname=${NANO_DEF_UNAME} gname=${NANO_DEF_GNAME}" > ${NANO_METALOG} 50445b2ffd0SWarner Losh cat ${NANO_METALOG}.pre | ${NANO_TOOLS}/mtree-dedup.awk | \ 50545b2ffd0SWarner Losh sed -e 's/ size=[0-9][0-9]*//' | sort >> ${NANO_METALOG} 50619edffefSWarner Losh fi 50719edffefSWarner Losh) 50819edffefSWarner Losh 5096b8c8deeSWill Andrewssetup_nanobsd ( ) ( 5106b8c8deeSWill Andrews pprint 2 "configure nanobsd setup" 5116b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.dl" 5126b8c8deeSWill Andrews 5136b8c8deeSWill Andrews ( 5141934c7aaSWarner Losh cd "${NANO_WORLDDIR}" 5156b8c8deeSWill Andrews 5166b8c8deeSWill Andrews # Move /usr/local/etc to /etc/local so that the /cfg stuff 5176b8c8deeSWill Andrews # can stomp on it. Otherwise packages like ipsec-tools which 5186b8c8deeSWill Andrews # have hardcoded paths under ${prefix}/etc are not tweakable. 5196b8c8deeSWill Andrews if [ -d usr/local/etc ] ; then 5206b8c8deeSWill Andrews ( 5216b8c8deeSWill Andrews mkdir -p etc/local 5226b8c8deeSWill Andrews cd usr/local/etc 5236b8c8deeSWill Andrews find . -print | cpio -dumpl ../../../etc/local 5246b8c8deeSWill Andrews cd .. 525849f5467SWarner Losh rm -rf etc 5266b8c8deeSWill Andrews ln -s ../../etc/local etc 5276b8c8deeSWill Andrews ) 5286b8c8deeSWill Andrews fi 5296b8c8deeSWill Andrews 5306b8c8deeSWill Andrews for d in var etc 5316b8c8deeSWill Andrews do 5326b8c8deeSWill Andrews # link /$d under /conf 5336b8c8deeSWill Andrews # we use hard links so we have them both places. 5346b8c8deeSWill Andrews # the files in /$d will be hidden by the mount. 5356b8c8deeSWill Andrews mkdir -p conf/base/$d conf/default/$d 5366b8c8deeSWill Andrews find $d -print | cpio -dumpl conf/base/ 5376b8c8deeSWill Andrews done 5386b8c8deeSWill Andrews 5396b8c8deeSWill Andrews echo "$NANO_RAM_ETCSIZE" > conf/base/etc/md_size 5406b8c8deeSWill Andrews echo "$NANO_RAM_TMPVARSIZE" > conf/base/var/md_size 5416b8c8deeSWill Andrews 5426b8c8deeSWill Andrews # pick up config files from the special partition 5437b77d3eaSWarner Losh echo "mount -o ro /dev/${NANO_DRIVE}${NANO_SLICE_CFG}" > conf/default/etc/remount 5446b8c8deeSWill Andrews 5456b8c8deeSWill Andrews # Put /tmp on the /var ramdisk (could be symlink already) 54619edffefSWarner Losh tgt_dir2symlink tmp var/tmp 5476b8c8deeSWill Andrews 5486b8c8deeSWill Andrews ) > ${NANO_OBJ}/_.dl 2>&1 5496b8c8deeSWill Andrews) 5506b8c8deeSWill Andrews 5516b8c8deeSWill Andrewssetup_nanobsd_etc ( ) ( 5526b8c8deeSWill Andrews pprint 2 "configure nanobsd /etc" 5536b8c8deeSWill Andrews 5546b8c8deeSWill Andrews ( 5551934c7aaSWarner Losh cd "${NANO_WORLDDIR}" 5566b8c8deeSWill Andrews 5576b8c8deeSWill Andrews # create diskless marker file 5586b8c8deeSWill Andrews touch etc/diskless 5596b8c8deeSWill Andrews 560849f5467SWarner Losh [ -n "${NANO_NOPRIV_BUILD}" ] && chmod 666 etc/defaults/rc.conf 5619e144f35SWarner Losh 5629e144f35SWarner Losh # Make root filesystem R/O by default 5636b8c8deeSWill Andrews echo "root_rw_mount=NO" >> etc/defaults/rc.conf 5649e144f35SWarner Losh # Disable entropy file, since / is read-only /var/db/entropy should be enough? 5659e144f35SWarner Losh echo "entropy_file=NO" >> etc/defaults/rc.conf 5669e144f35SWarner Losh 567849f5467SWarner Losh [ -n "${NANO_NOPRIV_BUILD}" ] && chmod 444 etc/defaults/rc.conf 5686b8c8deeSWill Andrews 5696b8c8deeSWill Andrews # save config file for scripts 5706b8c8deeSWill Andrews echo "NANO_DRIVE=${NANO_DRIVE}" > etc/nanobsd.conf 5716b8c8deeSWill Andrews 5727b77d3eaSWarner Losh echo "/dev/${NANO_DRIVE}${NANO_SLICE_ROOT}a / ufs ro 1 1" > etc/fstab 5737b77d3eaSWarner Losh echo "/dev/${NANO_DRIVE}${NANO_SLICE_CFG} /cfg ufs rw,noauto 2 2" >> etc/fstab 5746b8c8deeSWill Andrews mkdir -p cfg 5756b8c8deeSWill Andrews ) 5766b8c8deeSWill Andrews) 5776b8c8deeSWill Andrews 5786b8c8deeSWill Andrewsprune_usr ( ) ( 5796b8c8deeSWill Andrews 5806b8c8deeSWill Andrews # Remove all empty directories in /usr 5811934c7aaSWarner Losh find "${NANO_WORLDDIR}"/usr -type d -depth -print | 5826b8c8deeSWill Andrews while read d 5836b8c8deeSWill Andrews do 5846b8c8deeSWill Andrews rmdir $d > /dev/null 2>&1 || true 5856b8c8deeSWill Andrews done 5866b8c8deeSWill Andrews) 5876b8c8deeSWill Andrews 5886b8c8deeSWill Andrewsnewfs_part ( ) ( 5896b8c8deeSWill Andrews local dev mnt lbl 5906b8c8deeSWill Andrews dev=$1 5916b8c8deeSWill Andrews mnt=$2 5926b8c8deeSWill Andrews lbl=$3 5936b8c8deeSWill Andrews echo newfs ${NANO_NEWFS} ${NANO_LABEL:+-L${NANO_LABEL}${lbl}} ${dev} 5946b8c8deeSWill Andrews newfs ${NANO_NEWFS} ${NANO_LABEL:+-L${NANO_LABEL}${lbl}} ${dev} 5956b8c8deeSWill Andrews mount -o async ${dev} ${mnt} 5966b8c8deeSWill Andrews) 5976b8c8deeSWill Andrews 5986b8c8deeSWill Andrews# Convenient spot to work around any umount issues that your build environment 5996b8c8deeSWill Andrews# hits by overriding this method. 6006b8c8deeSWill Andrewsnano_umount ( ) ( 6016b8c8deeSWill Andrews umount ${1} 6026b8c8deeSWill Andrews) 6036b8c8deeSWill Andrews 6046b8c8deeSWill Andrewspopulate_slice ( ) ( 6056b8c8deeSWill Andrews local dev dir mnt lbl 6066b8c8deeSWill Andrews dev=$1 6076b8c8deeSWill Andrews dir=$2 6086b8c8deeSWill Andrews mnt=$3 6096b8c8deeSWill Andrews lbl=$4 6106b8c8deeSWill Andrews echo "Creating ${dev} (mounting on ${mnt})" 6116b8c8deeSWill Andrews newfs_part ${dev} ${mnt} ${lbl} 6126b8c8deeSWill Andrews if [ -n "${dir}" -a -d "${dir}" ]; then 6136b8c8deeSWill Andrews echo "Populating ${lbl} from ${dir}" 6141934c7aaSWarner Losh cd "${dir}" 6156b8c8deeSWill Andrews find . -print | grep -Ev '/(CVS|\.svn|\.hg|\.git)' | cpio -dumpv ${mnt} 6166b8c8deeSWill Andrews fi 6176b8c8deeSWill Andrews df -i ${mnt} 6186b8c8deeSWill Andrews nano_umount ${mnt} 6196b8c8deeSWill Andrews) 6206b8c8deeSWill Andrews 6216b8c8deeSWill Andrewspopulate_cfg_slice ( ) ( 6226b8c8deeSWill Andrews populate_slice "$1" "$2" "$3" "$4" 6236b8c8deeSWill Andrews) 6246b8c8deeSWill Andrews 6256b8c8deeSWill Andrewspopulate_data_slice ( ) ( 6266b8c8deeSWill Andrews populate_slice "$1" "$2" "$3" "$4" 6276b8c8deeSWill Andrews) 6286b8c8deeSWill Andrews 6296b8c8deeSWill Andrewscreate_diskimage ( ) ( 6306b8c8deeSWill Andrews pprint 2 "build diskimage" 6316b8c8deeSWill Andrews pprint 3 "log: ${NANO_OBJ}/_.di" 6326b8c8deeSWill Andrews 6336b8c8deeSWill Andrews ( 6346b8c8deeSWill Andrews echo $NANO_MEDIASIZE $NANO_IMAGES \ 6356b8c8deeSWill Andrews $NANO_SECTS $NANO_HEADS \ 6366b8c8deeSWill Andrews $NANO_CODESIZE $NANO_CONFSIZE $NANO_DATASIZE | 6376b8c8deeSWill Andrews awk ' 6386b8c8deeSWill Andrews { 6396b8c8deeSWill Andrews printf "# %s\n", $0 6406b8c8deeSWill Andrews 6416b8c8deeSWill Andrews # size of cylinder in sectors 6426b8c8deeSWill Andrews cs = $3 * $4 6436b8c8deeSWill Andrews 6446b8c8deeSWill Andrews # number of full cylinders on media 6456b8c8deeSWill Andrews cyl = int ($1 / cs) 6466b8c8deeSWill Andrews 6476b8c8deeSWill Andrews # output fdisk geometry spec, truncate cyls to 1023 6486b8c8deeSWill Andrews if (cyl <= 1023) 6496b8c8deeSWill Andrews print "g c" cyl " h" $4 " s" $3 6506b8c8deeSWill Andrews else 6516b8c8deeSWill Andrews print "g c" 1023 " h" $4 " s" $3 6526b8c8deeSWill Andrews 6536b8c8deeSWill Andrews if ($7 > 0) { 6546b8c8deeSWill Andrews # size of data partition in full cylinders 6556b8c8deeSWill Andrews dsl = int (($7 + cs - 1) / cs) 6566b8c8deeSWill Andrews } else { 6576b8c8deeSWill Andrews dsl = 0; 6586b8c8deeSWill Andrews } 6596b8c8deeSWill Andrews 6606b8c8deeSWill Andrews # size of config partition in full cylinders 6616b8c8deeSWill Andrews csl = int (($6 + cs - 1) / cs) 6626b8c8deeSWill Andrews 6636b8c8deeSWill Andrews if ($5 == 0) { 6646b8c8deeSWill Andrews # size of image partition(s) in full cylinders 6656b8c8deeSWill Andrews isl = int ((cyl - dsl - csl) / $2) 6666b8c8deeSWill Andrews } else { 6676b8c8deeSWill Andrews isl = int (($5 + cs - 1) / cs) 6686b8c8deeSWill Andrews } 6696b8c8deeSWill Andrews 6706b8c8deeSWill Andrews # First image partition start at second track 6716b8c8deeSWill Andrews print "p 1 165 " $3, isl * cs - $3 6726b8c8deeSWill Andrews c = isl * cs; 6736b8c8deeSWill Andrews 6746b8c8deeSWill Andrews # Second image partition (if any) also starts offset one 6756b8c8deeSWill Andrews # track to keep them identical. 6766b8c8deeSWill Andrews if ($2 > 1) { 6776b8c8deeSWill Andrews print "p 2 165 " $3 + c, isl * cs - $3 6786b8c8deeSWill Andrews c += isl * cs; 6796b8c8deeSWill Andrews } 6806b8c8deeSWill Andrews 6816b8c8deeSWill Andrews # Config partition starts at cylinder boundary. 6826b8c8deeSWill Andrews print "p 3 165 " c, csl * cs 6836b8c8deeSWill Andrews c += csl * cs 6846b8c8deeSWill Andrews 6856b8c8deeSWill Andrews # Data partition (if any) starts at cylinder boundary. 6866b8c8deeSWill Andrews if ($7 > 0) { 6876b8c8deeSWill Andrews print "p 4 165 " c, dsl * cs 6886b8c8deeSWill Andrews } else if ($7 < 0 && $1 > c) { 6896b8c8deeSWill Andrews print "p 4 165 " c, $1 - c 6906b8c8deeSWill Andrews } else if ($1 < c) { 6916b8c8deeSWill Andrews print "Disk space overcommitted by", \ 6926b8c8deeSWill Andrews c - $1, "sectors" > "/dev/stderr" 6936b8c8deeSWill Andrews exit 2 6946b8c8deeSWill Andrews } 6956b8c8deeSWill Andrews 6966b8c8deeSWill Andrews # Force slice 1 to be marked active. This is necessary 6976b8c8deeSWill Andrews # for booting the image from a USB device to work. 6986b8c8deeSWill Andrews print "a 1" 6996b8c8deeSWill Andrews } 7006b8c8deeSWill Andrews ' > ${NANO_OBJ}/_.fdisk 7016b8c8deeSWill Andrews 7026b8c8deeSWill Andrews IMG=${NANO_DISKIMGDIR}/${NANO_IMGNAME} 7036b8c8deeSWill Andrews MNT=${NANO_OBJ}/_.mnt 7046b8c8deeSWill Andrews mkdir -p ${MNT} 7056b8c8deeSWill Andrews 7066b8c8deeSWill Andrews if [ "${NANO_MD_BACKING}" = "swap" ] ; then 7076b8c8deeSWill Andrews MD=`mdconfig -a -t swap -s ${NANO_MEDIASIZE} -x ${NANO_SECTS} \ 7086b8c8deeSWill Andrews -y ${NANO_HEADS}` 7096b8c8deeSWill Andrews else 7106b8c8deeSWill Andrews echo "Creating md backing file..." 711849f5467SWarner Losh rm -f ${IMG} 7126b8c8deeSWill Andrews dd if=/dev/zero of=${IMG} seek=${NANO_MEDIASIZE} count=0 7136b8c8deeSWill Andrews MD=`mdconfig -a -t vnode -f ${IMG} -x ${NANO_SECTS} \ 7146b8c8deeSWill Andrews -y ${NANO_HEADS}` 7156b8c8deeSWill Andrews fi 7166b8c8deeSWill Andrews 7176b8c8deeSWill Andrews trap "echo 'Running exit trap code' ; df -i ${MNT} ; nano_umount ${MNT} || true ; mdconfig -d -u $MD" 1 2 15 EXIT 7186b8c8deeSWill Andrews 7196b8c8deeSWill Andrews fdisk -i -f ${NANO_OBJ}/_.fdisk ${MD} 7206b8c8deeSWill Andrews fdisk ${MD} 7216b8c8deeSWill Andrews # XXX: params 7226b8c8deeSWill Andrews # XXX: pick up cached boot* files, they may not be in image anymore. 7236b8c8deeSWill Andrews if [ -f ${NANO_WORLDDIR}/${NANO_BOOTLOADER} ]; then 7246b8c8deeSWill Andrews boot0cfg -B -b ${NANO_WORLDDIR}/${NANO_BOOTLOADER} ${NANO_BOOT0CFG} ${MD} 7256b8c8deeSWill Andrews fi 7266b8c8deeSWill Andrews if [ -f ${NANO_WORLDDIR}/boot/boot ]; then 7277b77d3eaSWarner Losh bsdlabel -w -B -b ${NANO_WORLDDIR}/boot/boot ${MD}${NANO_SLICE_ROOT} 7286b8c8deeSWill Andrews else 7297b77d3eaSWarner Losh bsdlabel -w ${MD}${NANO_SLICE_ROOT} 7306b8c8deeSWill Andrews fi 7317b77d3eaSWarner Losh bsdlabel ${MD}${NANO_SLICE_ROOT} 7326b8c8deeSWill Andrews 7336b8c8deeSWill Andrews # Create first image 7347b77d3eaSWarner Losh populate_slice /dev/${MD}${NANO_SLICE_ROOT}a ${NANO_WORLDDIR} ${MNT} "${NANO_SLICE_ROOT}a" 7357b77d3eaSWarner Losh mount /dev/${MD}${NANO_SLICE_ROOT}a ${MNT} 7366b8c8deeSWill Andrews echo "Generating mtree..." 7371934c7aaSWarner Losh ( cd "${MNT}" && mtree -c ) > ${NANO_OBJ}/_.mtree 7381934c7aaSWarner Losh ( cd "${MNT}" && du -k ) > ${NANO_OBJ}/_.du 7391934c7aaSWarner Losh nano_umount "${MNT}" 7406b8c8deeSWill Andrews 7416b8c8deeSWill Andrews if [ $NANO_IMAGES -gt 1 -a $NANO_INIT_IMG2 -gt 0 ] ; then 7426b8c8deeSWill Andrews # Duplicate to second image (if present) 7436b8c8deeSWill Andrews echo "Duplicating to second image..." 7447b77d3eaSWarner Losh dd conv=sparse if=/dev/${MD}${NANO_SLICE_ROOT} of=/dev/${MD}${NANO_SLICE_ALTROOT} bs=64k 7457b77d3eaSWarner Losh mount /dev/${MD}${NANO_SLICE_ALTROOT}a ${MNT} 7466b8c8deeSWill Andrews for f in ${MNT}/etc/fstab ${MNT}/conf/base/etc/fstab 7476b8c8deeSWill Andrews do 7487b77d3eaSWarner Losh sed -i "" "s=${NANO_DRIVE}${NANO_SLICE_ROOT}=${NANO_DRIVE}${NANO_SLICE_ALTROOT}=g" $f 7496b8c8deeSWill Andrews done 7506b8c8deeSWill Andrews nano_umount ${MNT} 7516b8c8deeSWill Andrews # Override the label from the first partition so we 7526b8c8deeSWill Andrews # don't confuse glabel with duplicates. 7530a852830SWarner Losh if [ -n "${NANO_LABEL}" ]; then 7547b77d3eaSWarner Losh tunefs -L ${NANO_LABEL}"${NANO_SLICE_ALTROOT}a" /dev/${MD}${NANO_SLICE_ALTROOT}a 7556b8c8deeSWill Andrews fi 7566b8c8deeSWill Andrews fi 7576b8c8deeSWill Andrews 7586b8c8deeSWill Andrews # Create Config slice 7597b77d3eaSWarner Losh populate_cfg_slice /dev/${MD}${NANO_SLICE_CFG} "${NANO_CFGDIR}" ${MNT} "${NANO_SLICE_CFG}" 7606b8c8deeSWill Andrews 7616b8c8deeSWill Andrews # Create Data slice, if any. 7620a852830SWarner Losh if [ -n "$NANO_SLICE_DATA" -a "$NANO_SLICE_CFG" = "$NANO_SLICE_DATA" -a \ 7630a852830SWarner Losh "$NANO_DATASIZE" -ne 0 ]; then 7647b77d3eaSWarner Losh pprint 2 "NANO_SLICE_DATA is the same as NANO_SLICE_CFG, fix." 7657b77d3eaSWarner Losh exit 2 7667b77d3eaSWarner Losh fi 7670a852830SWarner Losh if [ $NANO_DATASIZE -ne 0 -a -n "$NANO_SLICE_DATA" ] ; then 7687b77d3eaSWarner Losh populate_data_slice /dev/${MD}${NANO_SLICE_DATA} "${NANO_DATADIR}" ${MNT} "${NANO_SLICE_DATA}" 7696b8c8deeSWill Andrews fi 7706b8c8deeSWill Andrews 7716b8c8deeSWill Andrews if [ "${NANO_MD_BACKING}" = "swap" ] ; then 7726b8c8deeSWill Andrews if [ ${NANO_IMAGE_MBRONLY} ]; then 7736b8c8deeSWill Andrews echo "Writing out _.disk.mbr..." 7746b8c8deeSWill Andrews dd if=/dev/${MD} of=${NANO_DISKIMGDIR}/_.disk.mbr bs=512 count=1 7756b8c8deeSWill Andrews else 7766b8c8deeSWill Andrews echo "Writing out ${NANO_IMGNAME}..." 7776b8c8deeSWill Andrews dd if=/dev/${MD} of=${IMG} bs=64k 7786b8c8deeSWill Andrews fi 7796b8c8deeSWill Andrews 7806b8c8deeSWill Andrews echo "Writing out ${NANO_IMGNAME}..." 7816b8c8deeSWill Andrews dd conv=sparse if=/dev/${MD} of=${IMG} bs=64k 7826b8c8deeSWill Andrews fi 7836b8c8deeSWill Andrews 7846b8c8deeSWill Andrews if ${do_copyout_partition} ; then 7856b8c8deeSWill Andrews echo "Writing out _.disk.image..." 7867b77d3eaSWarner Losh dd conv=sparse if=/dev/${MD}${NANO_SLICE_ROOT} of=${NANO_DISKIMGDIR}/_.disk.image bs=64k 7876b8c8deeSWill Andrews fi 7886b8c8deeSWill Andrews mdconfig -d -u $MD 7896b8c8deeSWill Andrews 7906b8c8deeSWill Andrews trap - 1 2 15 7916b8c8deeSWill Andrews trap nano_cleanup EXIT 7926b8c8deeSWill Andrews 7936b8c8deeSWill Andrews ) > ${NANO_OBJ}/_.di 2>&1 7946b8c8deeSWill Andrews) 7956b8c8deeSWill Andrews 7966b8c8deeSWill Andrewslast_orders ( ) ( 7976b8c8deeSWill Andrews # Redefine this function with any last orders you may have 7986b8c8deeSWill Andrews # after the build completed, for instance to copy the finished 7996b8c8deeSWill Andrews # image to a more convenient place: 8006b8c8deeSWill Andrews # cp ${NANO_DISKIMGDIR}/_.disk.image /home/ftp/pub/nanobsd.disk 8016b8c8deeSWill Andrews true 8026b8c8deeSWill Andrews) 8036b8c8deeSWill Andrews 8046b8c8deeSWill Andrews####################################################################### 8056b8c8deeSWill Andrews# 8066b8c8deeSWill Andrews# Optional convenience functions. 8076b8c8deeSWill Andrews# 8086b8c8deeSWill Andrews####################################################################### 8096b8c8deeSWill Andrews 8106b8c8deeSWill Andrews####################################################################### 8116b8c8deeSWill Andrews# Common Flash device geometries 8126b8c8deeSWill Andrews# 8136b8c8deeSWill Andrews 8146b8c8deeSWill AndrewsFlashDevice ( ) { 8156b8c8deeSWill Andrews if [ -d ${NANO_TOOLS} ] ; then 8166b8c8deeSWill Andrews . ${NANO_TOOLS}/FlashDevice.sub 8176b8c8deeSWill Andrews else 8186b8c8deeSWill Andrews . ${NANO_SRC}/${NANO_TOOLS}/FlashDevice.sub 8196b8c8deeSWill Andrews fi 8206b8c8deeSWill Andrews sub_FlashDevice $1 $2 8216b8c8deeSWill Andrews} 8226b8c8deeSWill Andrews 8236b8c8deeSWill Andrews####################################################################### 8246b8c8deeSWill Andrews# USB device geometries 8256b8c8deeSWill Andrews# 8266b8c8deeSWill Andrews# Usage: 8276b8c8deeSWill Andrews# UsbDevice Generic 1000 # a generic flash key sold as having 1GB 8286b8c8deeSWill Andrews# 8296b8c8deeSWill Andrews# This function will set NANO_MEDIASIZE, NANO_HEADS and NANO_SECTS for you. 8306b8c8deeSWill Andrews# 8316b8c8deeSWill Andrews# Note that the capacity of a flash key is usually advertised in MB or 8326b8c8deeSWill Andrews# GB, *not* MiB/GiB. As such, the precise number of cylinders available 8336b8c8deeSWill Andrews# for C/H/S geometry may vary depending on the actual flash geometry. 8346b8c8deeSWill Andrews# 8356b8c8deeSWill Andrews# The following generic device layouts are understood: 8366b8c8deeSWill Andrews# generic An alias for generic-hdd. 8376b8c8deeSWill Andrews# generic-hdd 255H 63S/T xxxxC with no MBR restrictions. 8386b8c8deeSWill Andrews# generic-fdd 64H 32S/T xxxxC with no MBR restrictions. 8396b8c8deeSWill Andrews# 8406b8c8deeSWill Andrews# The generic-hdd device is preferred for flash devices larger than 1GB. 8416b8c8deeSWill Andrews# 8426b8c8deeSWill Andrews 8436b8c8deeSWill AndrewsUsbDevice ( ) { 8446b8c8deeSWill Andrews a1=`echo $1 | tr '[:upper:]' '[:lower:]'` 8456b8c8deeSWill Andrews case $a1 in 8466b8c8deeSWill Andrews generic-fdd) 8476b8c8deeSWill Andrews NANO_HEADS=64 8486b8c8deeSWill Andrews NANO_SECTS=32 8496b8c8deeSWill Andrews NANO_MEDIASIZE=$(( $2 * 1000 * 1000 / 512 )) 8506b8c8deeSWill Andrews ;; 8516b8c8deeSWill Andrews generic|generic-hdd) 8526b8c8deeSWill Andrews NANO_HEADS=255 8536b8c8deeSWill Andrews NANO_SECTS=63 8546b8c8deeSWill Andrews NANO_MEDIASIZE=$(( $2 * 1000 * 1000 / 512 )) 8556b8c8deeSWill Andrews ;; 8566b8c8deeSWill Andrews *) 8576b8c8deeSWill Andrews echo "Unknown USB flash device" 8586b8c8deeSWill Andrews exit 2 8596b8c8deeSWill Andrews ;; 8606b8c8deeSWill Andrews esac 8616b8c8deeSWill Andrews} 8626b8c8deeSWill Andrews 8636b8c8deeSWill Andrews####################################################################### 8646b8c8deeSWill Andrews# Setup serial console 8656b8c8deeSWill Andrews 8666b8c8deeSWill Andrewscust_comconsole ( ) ( 8676b8c8deeSWill Andrews # Enable getty on console 8686b8c8deeSWill Andrews sed -i "" -e /tty[du]0/s/off/on/ ${NANO_WORLDDIR}/etc/ttys 8696b8c8deeSWill Andrews 8706b8c8deeSWill Andrews # Disable getty on syscons devices 8716b8c8deeSWill Andrews sed -i "" -e '/^ttyv[0-8]/s/ on/ off/' ${NANO_WORLDDIR}/etc/ttys 8726b8c8deeSWill Andrews 8736b8c8deeSWill Andrews # Tell loader to use serial console early. 8746b8c8deeSWill Andrews echo "${NANO_BOOT2CFG}" > ${NANO_WORLDDIR}/boot.config 8756b8c8deeSWill Andrews) 8766b8c8deeSWill Andrews 8776b8c8deeSWill Andrews####################################################################### 8786b8c8deeSWill Andrews# Allow root login via ssh 8796b8c8deeSWill Andrews 8806b8c8deeSWill Andrewscust_allow_ssh_root ( ) ( 8816b8c8deeSWill Andrews sed -i "" -e '/PermitRootLogin/s/.*/PermitRootLogin yes/' \ 8826b8c8deeSWill Andrews ${NANO_WORLDDIR}/etc/ssh/sshd_config 8836b8c8deeSWill Andrews) 8846b8c8deeSWill Andrews 8856b8c8deeSWill Andrews####################################################################### 8866b8c8deeSWill Andrews# Install the stuff under ./Files 8876b8c8deeSWill Andrews 8886b8c8deeSWill Andrewscust_install_files ( ) ( 8891934c7aaSWarner Losh cd "${NANO_TOOLS}/Files" 8906b8c8deeSWill Andrews find . -print | grep -Ev '/(CVS|\.svn|\.hg|\.git)' | cpio -Ldumpv ${NANO_WORLDDIR} 8916b8c8deeSWill Andrews) 8926b8c8deeSWill Andrews 8936b8c8deeSWill Andrews####################################################################### 8946b8c8deeSWill Andrews# Install packages from ${NANO_PACKAGE_DIR} 8956b8c8deeSWill Andrews 8966b8c8deeSWill Andrewscust_pkgng ( ) ( 8976b8c8deeSWill Andrews 8986b8c8deeSWill Andrews # If the package directory doesn't exist, we're done. 8996b8c8deeSWill Andrews if [ ! -d ${NANO_PACKAGE_DIR} ]; then 9006b8c8deeSWill Andrews echo "DONE 0 packages" 9016b8c8deeSWill Andrews return 0 9026b8c8deeSWill Andrews fi 9036b8c8deeSWill Andrews 9046b8c8deeSWill Andrews # Find a pkg-* package 9056b8c8deeSWill Andrews for x in `find -s ${NANO_PACKAGE_DIR} -iname 'pkg-*'`; do 9066b8c8deeSWill Andrews _NANO_PKG_PACKAGE=`basename "$x"` 9076b8c8deeSWill Andrews done 9086b8c8deeSWill Andrews if [ -z "${_NANO_PKG_PACKAGE}" -o ! -f "${NANO_PACKAGE_DIR}/${_NANO_PKG_PACKAGE}" ]; then 9096b8c8deeSWill Andrews echo "FAILED: need a pkg/ package for bootstrapping" 9106b8c8deeSWill Andrews exit 2 9116b8c8deeSWill Andrews fi 9126b8c8deeSWill Andrews 9136b8c8deeSWill Andrews # Copy packages into chroot 9146b8c8deeSWill Andrews mkdir -p ${NANO_WORLDDIR}/Pkg 9156b8c8deeSWill Andrews ( 9161934c7aaSWarner Losh cd "${NANO_PACKAGE_DIR}" 9171934c7aaSWarner Losh find "${NANO_PACKAGE_LIST}" -print | 9186b8c8deeSWill Andrews cpio -Ldumpv ${NANO_WORLDDIR}/Pkg 9196b8c8deeSWill Andrews ) 9206b8c8deeSWill Andrews 9216b8c8deeSWill Andrews #Bootstrap pkg 9226b8c8deeSWill Andrews CR env ASSUME_ALWAYS_YES=YES SIGNATURE_TYPE=none /usr/sbin/pkg add /Pkg/${_NANO_PKG_PACKAGE} 9236b8c8deeSWill Andrews CR pkg -N >/dev/null 2>&1 9246b8c8deeSWill Andrews if [ "$?" -ne "0" ]; then 9256b8c8deeSWill Andrews echo "FAILED: pkg bootstrapping faied" 9266b8c8deeSWill Andrews exit 2 9276b8c8deeSWill Andrews fi 928849f5467SWarner Losh rm -f ${NANO_WORLDDIR}/Pkg/pkg-* 9296b8c8deeSWill Andrews 9306b8c8deeSWill Andrews # Count & report how many we have to install 9316b8c8deeSWill Andrews todo=`ls ${NANO_WORLDDIR}/Pkg | /usr/bin/wc -l` 9326b8c8deeSWill Andrews todo=$(expr $todo + 1) # add one for pkg since it is installed already 9336b8c8deeSWill Andrews echo "=== TODO: $todo" 9346b8c8deeSWill Andrews ls ${NANO_WORLDDIR}/Pkg 9356b8c8deeSWill Andrews echo "===" 9366b8c8deeSWill Andrews while true 9376b8c8deeSWill Andrews do 9386b8c8deeSWill Andrews # Record how many we have now 9396b8c8deeSWill Andrews have=$(CR env ASSUME_ALWAYS_YES=YES /usr/sbin/pkg info | /usr/bin/wc -l) 9406b8c8deeSWill Andrews 9416b8c8deeSWill Andrews # Attempt to install more packages 9426b8c8deeSWill Andrews CR0 'ls 'Pkg/*txz' | xargs env ASSUME_ALWAYS_YES=YES /usr/sbin/pkg add' 9436b8c8deeSWill Andrews 9446b8c8deeSWill Andrews # See what that got us 9456b8c8deeSWill Andrews now=$(CR env ASSUME_ALWAYS_YES=YES /usr/sbin/pkg info | /usr/bin/wc -l) 9466b8c8deeSWill Andrews echo "=== NOW $now" 9476b8c8deeSWill Andrews CR env ASSUME_ALWAYS_YES=YES /usr/sbin/pkg info 9486b8c8deeSWill Andrews echo "===" 9496b8c8deeSWill Andrews if [ $now -eq $todo ] ; then 9506b8c8deeSWill Andrews echo "DONE $now packages" 9516b8c8deeSWill Andrews break 9526b8c8deeSWill Andrews elif [ $now -eq $have ] ; then 9536b8c8deeSWill Andrews echo "FAILED: Nothing happened on this pass" 9546b8c8deeSWill Andrews exit 2 9556b8c8deeSWill Andrews fi 9566b8c8deeSWill Andrews done 957849f5467SWarner Losh rm -rf ${NANO_WORLDDIR}/Pkg 9586b8c8deeSWill Andrews) 9596b8c8deeSWill Andrews 9606b8c8deeSWill Andrews####################################################################### 9616b8c8deeSWill Andrews# Convenience function: 9626b8c8deeSWill Andrews# Register all args as customize function. 9636b8c8deeSWill Andrews 9646b8c8deeSWill Andrewscustomize_cmd ( ) { 9656b8c8deeSWill Andrews NANO_CUSTOMIZE="$NANO_CUSTOMIZE $*" 9666b8c8deeSWill Andrews} 9676b8c8deeSWill Andrews 9686b8c8deeSWill Andrews####################################################################### 9696b8c8deeSWill Andrews# Convenience function: 9706b8c8deeSWill Andrews# Register all args as late customize function to run just before 9716b8c8deeSWill Andrews# image creation. 9726b8c8deeSWill Andrews 9736b8c8deeSWill Andrewslate_customize_cmd ( ) { 9746b8c8deeSWill Andrews NANO_LATE_CUSTOMIZE="$NANO_LATE_CUSTOMIZE $*" 9756b8c8deeSWill Andrews} 9766b8c8deeSWill Andrews 9776b8c8deeSWill Andrews####################################################################### 9786b8c8deeSWill Andrews# 9796b8c8deeSWill Andrews# All set up to go... 9806b8c8deeSWill Andrews# 9816b8c8deeSWill Andrews####################################################################### 9826b8c8deeSWill Andrews 9836b8c8deeSWill Andrews# Progress Print 9846b8c8deeSWill Andrews# Print $2 at level $1. 9856b8c8deeSWill Andrewspprint ( ) ( 9866b8c8deeSWill Andrews if [ "$1" -le $PPLEVEL ]; then 9876b8c8deeSWill Andrews runtime=$(( `date +%s` - $NANO_STARTTIME )) 9886b8c8deeSWill Andrews printf "%s %.${1}s %s\n" "`date -u -r $runtime +%H:%M:%S`" "#####" "$2" 1>&3 9896b8c8deeSWill Andrews fi 9906b8c8deeSWill Andrews) 9916b8c8deeSWill Andrews 9926b8c8deeSWill Andrewsusage ( ) { 9936b8c8deeSWill Andrews ( 9946b8c8deeSWill Andrews echo "Usage: $0 [-bfiKknqvw] [-c config_file]" 9956b8c8deeSWill Andrews echo " -b suppress builds (both kernel and world)" 9966b8c8deeSWill Andrews echo " -c specify config file" 9976b8c8deeSWill Andrews echo " -f suppress code slice extraction" 9986b8c8deeSWill Andrews echo " -i suppress disk image build" 9996b8c8deeSWill Andrews echo " -K suppress installkernel" 10006b8c8deeSWill Andrews echo " -k suppress buildkernel" 10016b8c8deeSWill Andrews echo " -n add -DNO_CLEAN to buildworld, buildkernel, etc" 10026b8c8deeSWill Andrews echo " -q make output more quiet" 10036b8c8deeSWill Andrews echo " -v make output more verbose" 10046b8c8deeSWill Andrews echo " -w suppress buildworld" 10056b8c8deeSWill Andrews ) 1>&2 10066b8c8deeSWill Andrews exit 2 10076b8c8deeSWill Andrews} 10086b8c8deeSWill Andrews 10096b8c8deeSWill Andrews####################################################################### 10106b8c8deeSWill Andrews# Setup and Export Internal variables 10116b8c8deeSWill Andrews# 10126b8c8deeSWill Andrews 10131934c7aaSWarner Loshexport_var ( ) { # Don't wawnt a subshell 10146b8c8deeSWill Andrews var=$1 10156b8c8deeSWill Andrews # Lookup value of the variable. 10166b8c8deeSWill Andrews eval val=\$$var 10176b8c8deeSWill Andrews pprint 3 "Setting variable: $var=\"$val\"" 10186b8c8deeSWill Andrews export $1 10196b8c8deeSWill Andrews} 10206b8c8deeSWill Andrews 10216b8c8deeSWill Andrews# Call this function to set defaults _after_ parsing options. 10221934c7aaSWarner Losh# dont want a subshell otherwise variable setting is thrown away. 10236b8c8deeSWill Andrewsset_defaults_and_export ( ) { 1024849f5467SWarner Losh : ${NANO_OBJ:=/usr/obj/nanobsd.${NANO_NAME}} 1025849f5467SWarner Losh : ${MAKEOBJDIRPREFIX:=${NANO_OBJ}} 10263a757adfSWarner Losh : ${NANO_DISKIMGDIR:=${NANO_OBJ}} 10276b8c8deeSWill Andrews NANO_WORLDDIR=${NANO_OBJ}/_.w 10286b8c8deeSWill Andrews NANO_MAKE_CONF_BUILD=${MAKEOBJDIRPREFIX}/make.conf.build 10296b8c8deeSWill Andrews NANO_MAKE_CONF_INSTALL=${NANO_OBJ}/make.conf.install 10306b8c8deeSWill Andrews 10316b8c8deeSWill Andrews # Override user's NANO_DRIVE if they specified a NANO_LABEL 1032849f5467SWarner Losh [ -n "${NANO_LABEL}" ] && NANO_DRIVE="ufs/${NANO_LABEL}" || true 10336b8c8deeSWill Andrews 10346b8c8deeSWill Andrews # Set a default NANO_TOOLS to NANO_SRC/NANO_TOOLS if it exists. 10356b8c8deeSWill Andrews [ ! -d "${NANO_TOOLS}" ] && [ -d "${NANO_SRC}/${NANO_TOOLS}" ] && \ 1036c275d9ecSWarner Losh NANO_TOOLS="${NANO_SRC}/${NANO_TOOLS}" || true 1037c275d9ecSWarner Losh 1038849f5467SWarner Losh [ -n "${NANO_NOPRIV_BUILD}" ] && [ -z "${NANO_METALOG}" ] && \ 1039c275d9ecSWarner Losh NANO_METALOG=${NANO_OBJ}/_.metalog || true 10406b8c8deeSWill Andrews 10416b8c8deeSWill Andrews NANO_STARTTIME=`date +%s` 10426b8c8deeSWill Andrews pprint 3 "Exporting NanoBSD variables" 10436b8c8deeSWill Andrews export_var MAKEOBJDIRPREFIX 10446b8c8deeSWill Andrews export_var NANO_ARCH 10456b8c8deeSWill Andrews export_var NANO_CODESIZE 10466b8c8deeSWill Andrews export_var NANO_CONFSIZE 10476b8c8deeSWill Andrews export_var NANO_CUSTOMIZE 10486b8c8deeSWill Andrews export_var NANO_DATASIZE 10496b8c8deeSWill Andrews export_var NANO_DRIVE 10506b8c8deeSWill Andrews export_var NANO_HEADS 10516b8c8deeSWill Andrews export_var NANO_IMAGES 10526b8c8deeSWill Andrews export_var NANO_IMGNAME 10536b8c8deeSWill Andrews export_var NANO_MAKE 10546b8c8deeSWill Andrews export_var NANO_MAKE_CONF_BUILD 10556b8c8deeSWill Andrews export_var NANO_MAKE_CONF_INSTALL 10566b8c8deeSWill Andrews export_var NANO_MEDIASIZE 10576b8c8deeSWill Andrews export_var NANO_NAME 10586b8c8deeSWill Andrews export_var NANO_NEWFS 10596b8c8deeSWill Andrews export_var NANO_OBJ 10606b8c8deeSWill Andrews export_var NANO_PMAKE 10616b8c8deeSWill Andrews export_var NANO_SECTS 10626b8c8deeSWill Andrews export_var NANO_SRC 10636b8c8deeSWill Andrews export_var NANO_TOOLS 10646b8c8deeSWill Andrews export_var NANO_WORLDDIR 10656b8c8deeSWill Andrews export_var NANO_BOOT0CFG 10666b8c8deeSWill Andrews export_var NANO_BOOTLOADER 10676b8c8deeSWill Andrews export_var NANO_LABEL 10686b8c8deeSWill Andrews export_var NANO_MODULES 1069c275d9ecSWarner Losh export_var NANO_NOPRIV_BUILD 1070c275d9ecSWarner Losh export_var NANO_METALOG 10711934c7aaSWarner Losh export_var SRCCONF 1072a9d9c49fSWarner Losh export_var SRC_ENV_CONF 10736b8c8deeSWill Andrews} 1074