1# $FreeBSD$ 2# 3# SPDX-License-Identifier: BSD-2-Clause-FreeBSD 4# 5# Copyright (c) 2018 Kristof Provost <kp@FreeBSD.org> 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions 9# are met: 10# 1. Redistributions of source code must retain the above copyright 11# notice, this list of conditions and the following disclaimer. 12# 2. Redistributions in binary form must reproduce the above copyright 13# notice, this list of conditions and the following disclaimer in the 14# documentation and/or other materials provided with the distribution. 15# 16# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26# SUCH DAMAGE. 27 28. $(atf_get_srcdir)/utils.subr 29 30common_dir=$(atf_get_srcdir)/../common 31 32atf_test_case "v4" "cleanup" 33v4_head() 34{ 35 atf_set descr 'Basic route-to test' 36 atf_set require.user root 37} 38 39v4_body() 40{ 41 pft_init 42 43 epair_send=$(vnet_mkepair) 44 ifconfig ${epair_send}a 192.0.2.1/24 up 45 epair_route=$(vnet_mkepair) 46 ifconfig ${epair_route}a 203.0.113.1/24 up 47 48 vnet_mkjail alcatraz ${epair_send}b ${epair_route}b 49 jexec alcatraz ifconfig ${epair_send}b 192.0.2.2/24 up 50 jexec alcatraz ifconfig ${epair_route}b 203.0.113.2/24 up 51 jexec alcatraz route add -net 198.51.100.0/24 192.0.2.1 52 jexec alcatraz pfctl -e 53 54 # Attempt to provoke PR 228782 55 pft_set_rules alcatraz "block all" "pass user 2" \ 56 "pass out route-to (${epair_route}b 203.0.113.1) from 192.0.2.2 to 198.51.100.1 no state" 57 jexec alcatraz nc -w 3 -s 192.0.2.2 198.51.100.1 22 58 59 # atf wants us to not return an error, but our netcat will fail 60 true 61} 62 63v4_cleanup() 64{ 65 pft_cleanup 66} 67 68atf_test_case "v6" "cleanup" 69v6_head() 70{ 71 atf_set descr 'Basic route-to test (IPv6)' 72 atf_set require.user root 73} 74 75v6_body() 76{ 77 pft_init 78 79 epair_send=$(vnet_mkepair) 80 ifconfig ${epair_send}a inet6 2001:db8:42::1/64 up no_dad -ifdisabled 81 epair_route=$(vnet_mkepair) 82 ifconfig ${epair_route}a inet6 2001:db8:43::1/64 up no_dad -ifdisabled 83 84 vnet_mkjail alcatraz ${epair_send}b ${epair_route}b 85 jexec alcatraz ifconfig ${epair_send}b inet6 2001:db8:42::2/64 up no_dad 86 jexec alcatraz ifconfig ${epair_route}b inet6 2001:db8:43::2/64 up no_dad 87 jexec alcatraz route add -6 2001:db8:666::/64 2001:db8:42::2 88 jexec alcatraz pfctl -e 89 90 # Attempt to provoke PR 228782 91 pft_set_rules alcatraz "block all" "pass user 2" \ 92 "pass out route-to (${epair_route}b 2001:db8:43::1) from 2001:db8:42::2 to 2001:db8:666::1 no state" 93 jexec alcatraz nc -6 -w 3 -s 2001:db8:42::2 2001:db8:666::1 22 94 95 # atf wants us to not return an error, but our netcat will fail 96 true 97} 98 99v6_cleanup() 100{ 101 pft_cleanup 102} 103 104atf_test_case "multiwan" "cleanup" 105multiwan_head() 106{ 107 atf_set descr 'Multi-WAN redirection / reply-to test' 108 atf_set require.user root 109} 110 111multiwan_body() 112{ 113 pft_init 114 115 epair_one=$(vnet_mkepair) 116 epair_two=$(vnet_mkepair) 117 epair_cl_one=$(vnet_mkepair) 118 epair_cl_two=$(vnet_mkepair) 119 120 vnet_mkjail srv ${epair_one}b ${epair_two}b 121 vnet_mkjail wan_one ${epair_one}a ${epair_cl_one}b 122 vnet_mkjail wan_two ${epair_two}a ${epair_cl_two}b 123 vnet_mkjail client ${epair_cl_one}a ${epair_cl_two}a 124 125 jexec client ifconfig ${epair_cl_one}a 203.0.113.1/25 126 jexec wan_one ifconfig ${epair_cl_one}b 203.0.113.2/25 127 jexec wan_one ifconfig ${epair_one}a 192.0.2.1/24 up 128 jexec wan_one sysctl net.inet.ip.forwarding=1 129 jexec srv ifconfig ${epair_one}b 192.0.2.2/24 up 130 jexec client route add 192.0.2.0/24 203.0.113.2 131 132 jexec client ifconfig ${epair_cl_two}a 203.0.113.128/25 133 jexec wan_two ifconfig ${epair_cl_two}b 203.0.113.129/25 134 jexec wan_two ifconfig ${epair_two}a 198.51.100.1/24 up 135 jexec wan_two sysctl net.inet.ip.forwarding=1 136 jexec srv ifconfig ${epair_two}b 198.51.100.2/24 up 137 jexec client route add 198.51.100.0/24 203.0.113.129 138 139 jexec srv ifconfig lo0 127.0.0.1/8 up 140 jexec srv route add default 192.0.2.1 141 jexec srv sysctl net.inet.ip.forwarding=1 142 143 # Run echo server in srv jail 144 jexec srv /usr/sbin/inetd -p multiwan.pid $(atf_get_srcdir)/echo_inetd.conf 145 146 jexec srv pfctl -e 147 pft_set_rules srv \ 148 "nat on ${epair_one}b inet from 127.0.0.0/8 to any -> (${epair_one}b)" \ 149 "nat on ${epair_two}b inet from 127.0.0.0/8 to any -> (${epair_two}b)" \ 150 "rdr on ${epair_one}b inet proto tcp from any to 192.0.2.2 port 7 -> 127.0.0.1 port 7" \ 151 "rdr on ${epair_two}b inet proto tcp from any to 198.51.100.2 port 7 -> 127.0.0.1 port 7" \ 152 "block in" \ 153 "block out" \ 154 "pass in quick on ${epair_one}b reply-to (${epair_one}b 192.0.2.1) inet proto tcp from any to 127.0.0.1 port 7" \ 155 "pass in quick on ${epair_two}b reply-to (${epair_two}b 198.51.100.1) inet proto tcp from any to 127.0.0.1 port 7" 156 157 # These will always succeed, because we don't change interface to route 158 # correctly here. 159 result=$(echo "one" | jexec wan_one nc -N -w 3 192.0.2.2 7) 160 if [ "${result}" != "one" ]; then 161 atf_fail "Redirect on one failed" 162 fi 163 result=$(echo "two" | jexec wan_two nc -N -w 3 198.51.100.2 7) 164 if [ "${result}" != "two" ]; then 165 atf_fail "Redirect on two failed" 166 fi 167 168 result=$(echo "one" | jexec client nc -N -w 3 192.0.2.2 7) 169 if [ "${result}" != "one" ]; then 170 atf_fail "Redirect from client on one failed" 171 fi 172 173 # This should trigger the issue fixed in 829a69db855b48ff7e8242b95e193a0783c489d9 174 result=$(echo "two" | jexec client nc -N -w 3 198.51.100.2 7) 175 if [ "${result}" != "two" ]; then 176 atf_fail "Redirect from client on two failed" 177 fi 178} 179 180multiwan_cleanup() 181{ 182 rm -f multiwan.pid 183 pft_cleanup 184} 185 186atf_test_case "multiwanlocal" "cleanup" 187multiwanlocal_head() 188{ 189 atf_set descr 'Multi-WAN local origin source-based redirection / route-to test' 190 atf_set require.user root 191} 192 193multiwanlocal_body() 194{ 195 pft_init 196 197 epair_one=$(vnet_mkepair) 198 epair_two=$(vnet_mkepair) 199 epair_cl_one=$(vnet_mkepair) 200 epair_cl_two=$(vnet_mkepair) 201 202 vnet_mkjail srv1 ${epair_one}b 203 vnet_mkjail srv2 ${epair_two}b 204 vnet_mkjail wan_one ${epair_one}a ${epair_cl_one}b 205 vnet_mkjail wan_two ${epair_two}a ${epair_cl_two}b 206 vnet_mkjail client ${epair_cl_one}a ${epair_cl_two}a 207 208 jexec client ifconfig ${epair_cl_one}a 203.0.113.1/25 209 jexec wan_one ifconfig ${epair_cl_one}b 203.0.113.2/25 210 jexec wan_one ifconfig ${epair_one}a 192.0.2.1/24 up 211 jexec wan_one sysctl net.inet.ip.forwarding=1 212 jexec srv1 ifconfig ${epair_one}b 192.0.2.2/24 up 213 214 jexec client ifconfig ${epair_cl_two}a 203.0.113.128/25 215 jexec wan_two ifconfig ${epair_cl_two}b 203.0.113.129/25 216 jexec wan_two ifconfig ${epair_two}a 198.51.100.1/24 up 217 jexec wan_two sysctl net.inet.ip.forwarding=1 218 jexec srv2 ifconfig ${epair_two}b 198.51.100.2/24 up 219 220 jexec client route add default 203.0.113.2 221 jexec srv1 route add default 192.0.2.1 222 jexec srv2 route add default 198.51.100.1 223 224 # Run data source in srv1 and srv2 225 jexec srv1 sh -c 'dd if=/dev/zero bs=1024 count=100 | nc -l 7 -w 2 -N &' 226 jexec srv2 sh -c 'dd if=/dev/zero bs=1024 count=100 | nc -l 7 -w 2 -N &' 227 228 jexec client pfctl -e 229 pft_set_rules client \ 230 "block in" \ 231 "block out" \ 232 "pass out quick route-to (${epair_cl_two}a 203.0.113.129) inet proto tcp from 203.0.113.128 to any port 7" \ 233 "pass out on ${epair_cl_one}a inet proto tcp from any to any port 7" 234 235 # This should work 236 result=$(jexec client nc -N -w 1 192.0.2.2 7 | wc -c) 237 if [ ${result} -ne 102400 ]; then 238 jexec client pfctl -ss 239 atf_fail "Redirect from client on one failed: ${result}" 240 fi 241 242 # This should trigger the issue 243 result=$(jexec client nc -N -w 1 -s 203.0.113.128 198.51.100.2 7 | wc -c) 244 jexec client pfctl -ss 245 if [ ${result} -ne 102400 ]; then 246 atf_fail "Redirect from client on two failed: ${result}" 247 fi 248} 249 250multiwanlocal_cleanup() 251{ 252 pft_cleanup 253} 254 255atf_test_case "icmp_nat" "cleanup" 256icmp_nat_head() 257{ 258 atf_set descr 'Test that ICMP packets are correct for route-to + NAT' 259 atf_set require.user root 260 atf_set require.progs scapy 261} 262 263icmp_nat_body() 264{ 265 pft_init 266 267 epair_one=$(vnet_mkepair) 268 epair_two=$(vnet_mkepair) 269 epair_three=$(vnet_mkepair) 270 271 vnet_mkjail gw ${epair_one}b ${epair_two}a ${epair_three}a 272 vnet_mkjail srv ${epair_two}b 273 vnet_mkjail srv2 ${epair_three}b 274 275 ifconfig ${epair_one}a 192.0.2.2/24 up 276 route add -net 198.51.100.0/24 192.0.2.1 277 jexec gw sysctl net.inet.ip.forwarding=1 278 jexec gw ifconfig ${epair_one}b 192.0.2.1/24 up 279 jexec gw ifconfig ${epair_two}a 198.51.100.1/24 up 280 jexec gw ifconfig ${epair_three}a 203.0.113.1/24 up mtu 500 281 jexec srv ifconfig ${epair_two}b 198.51.100.2/24 up 282 jexec srv route add default 198.51.100.1 283 jexec srv2 ifconfig ${epair_three}b 203.0.113.2/24 up mtu 500 284 jexec srv2 route add default 203.0.113.1 285 286 # Sanity check 287 atf_check -s exit:0 -o ignore ping -c 1 198.51.100.2 288 289 jexec gw pfctl -e 290 pft_set_rules gw \ 291 "nat on ${epair_two}a inet from 192.0.2.0/24 to any -> (${epair_two}a)" \ 292 "nat on ${epair_three}a inet from 192.0.2.0/24 to any -> (${epair_three}a)" \ 293 "pass out route-to (${epair_three}a 203.0.113.2) proto icmp icmp-type echoreq" 294 295 # Now ensure that we get an ICMP error with the correct IP addresses in it. 296 atf_check -s exit:0 ${common_dir}/pft_icmp_check.py \ 297 --to 198.51.100.2 \ 298 --fromaddr 192.0.2.2 \ 299 --recvif ${epair_one}a \ 300 --sendif ${epair_one}a 301 302 # ping reports the ICMP error, so check of that too. 303 atf_check -s exit:2 -o match:'frag needed and DF set' \ 304 ping -D -c 1 -s 1000 198.51.100.2 305} 306 307icmp_nat_cleanup() 308{ 309 pft_cleanup 310} 311 312atf_init_test_cases() 313{ 314 atf_add_test_case "v4" 315 atf_add_test_case "v6" 316 atf_add_test_case "multiwan" 317 atf_add_test_case "multiwanlocal" 318 atf_add_test_case "icmp_nat" 319} 320