xref: /freebsd/tests/sys/netpfil/common/dummynet.sh (revision a03411e84728e9b267056fd31c7d1d9d1dc1b01e)
1#
2# SPDX-License-Identifier: BSD-2-Clause
3#
4# Copyright (c) 2021 Rubicon Communications, LLC (Netgate)
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions
8# are met:
9# 1. Redistributions of source code must retain the above copyright
10#    notice, this list of conditions and the following disclaimer.
11# 2. Redistributions in binary form must reproduce the above copyright
12#    notice, this list of conditions and the following disclaimer in the
13#    documentation and/or other materials provided with the distribution.
14#
15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25# SUCH DAMAGE.
26
27. $(atf_get_srcdir)/utils.subr
28. $(atf_get_srcdir)/runner.subr
29
30interface_removal_head()
31{
32	atf_set descr 'Test removing interfaces with dummynet delayed traffic'
33	atf_set require.user root
34}
35
36interface_removal_body()
37{
38	fw=$1
39	firewall_init $fw
40	dummynet_init $fw
41
42	epair=$(vnet_mkepair)
43	vnet_mkjail alcatraz ${epair}b
44
45	ifconfig ${epair}a 192.0.2.1/24 up
46	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
47
48	# Sanity check
49	atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
50
51	jexec alcatraz dnctl pipe 1 config delay 1500
52
53	firewall_config alcatraz ${fw} \
54		"ipfw"	\
55			"ipfw add 1000 pipe 1 ip from any to any" \
56		"pf"	\
57			"pass on ${epair}b dnpipe 1"
58
59	# single ping succeeds just fine
60	atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
61
62	# Send traffic that'll still be pending when we remove the interface
63	ping -c 5 -s 1200 192.0.2.2 &
64	sleep 1 # Give ping the chance to start.
65
66	# Remove the interface, but keep the jail around for a bit
67	ifconfig ${epair}a destroy
68
69	sleep 3
70}
71
72interface_removal_cleanup()
73{
74	firewall_cleanup $1
75}
76
77pipe_head()
78{
79	atf_set descr 'Basic pipe test'
80	atf_set require.user root
81}
82
83pipe_body()
84{
85	fw=$1
86	firewall_init $fw
87	dummynet_init $fw
88
89	epair=$(vnet_mkepair)
90	vnet_mkjail alcatraz ${epair}b
91
92	ifconfig ${epair}a 192.0.2.1/24 up
93	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
94
95	# Sanity check
96	atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
97
98	jexec alcatraz dnctl pipe 1 config bw 30Byte/s
99
100	firewall_config alcatraz ${fw} \
101		"ipfw"	\
102			"ipfw add 1000 pipe 1 ip from any to any" \
103		"pf"	\
104			"pass on ${epair}b dnpipe 1"
105
106	# single ping succeeds just fine
107	atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
108
109	# Saturate the link
110	ping -i .1 -c 5 -s 1200 192.0.2.2
111
112	# We should now be hitting the limits and get this packet dropped.
113	atf_check -s exit:2 -o ignore ping -c 1 -s 1200 192.0.2.2
114}
115
116pipe_cleanup()
117{
118	firewall_cleanup $1
119}
120
121pipe_v6_head()
122{
123	atf_set descr 'Basic IPv6 pipe test'
124	atf_set require.user root
125}
126
127pipe_v6_body()
128{
129	fw=$1
130	firewall_init $fw
131	dummynet_init $fw
132
133	epair=$(vnet_mkepair)
134	vnet_mkjail alcatraz ${epair}b
135
136	ifconfig ${epair}a inet6 2001:db8:42::1/64 up no_dad
137	jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2/64 up no_dad
138
139	# Sanity check
140	atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2
141
142	jexec alcatraz dnctl pipe 1 config bw 100Byte/s
143
144	firewall_config alcatraz ${fw} \
145		"ipfw"	\
146			"ipfw add 1000 pipe 1 ip6 from any to any" \
147		"pf"	\
148			"pass on ${epair}b dnpipe 1"
149
150	# Single ping succeeds
151	atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2
152
153	# Saturate the link
154	ping6 -i .1 -c 5 -s 1200 2001:db8:42::2
155
156	# We should now be hitting the limit and get this packet dropped.
157	atf_check -s exit:2 -o ignore ping6 -c 1 -s 1200 2001:db8:42::2
158}
159
160pipe_v6_cleanup()
161{
162	firewall_cleanup $1
163}
164
165codel_head()
166{
167	atf_set descr 'FQ_CODEL basic test'
168	atf_set require.user root
169}
170
171codel_body()
172{
173	fw=$1
174	firewall_init $fw
175	dummynet_init $fw
176
177	epair=$(vnet_mkepair)
178	vnet_mkjail alcatraz ${epair}b
179
180	ifconfig ${epair}a 192.0.2.1/24 up
181	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
182
183	# Sanity check
184	atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
185
186	jexec alcatraz dnctl pipe 1 config  bw 10Mb queue 100 droptail
187	jexec alcatraz dnctl sched 1 config pipe 1 type fq_codel target 0ms interval 0ms quantum 1514 limit 10240 flows 1024 ecn
188	jexec alcatraz dnctl queue 1 config pipe 1 droptail
189
190	firewall_config alcatraz ${fw} \
191		"ipfw"	\
192			"ipfw add 1000 queue 1 ip from any to any" \
193		"pf"	\
194			"pass dnqueue 1"
195
196	# single ping succeeds just fine
197	atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
198}
199
200codel_cleanup()
201{
202	firewall_cleanup $1
203}
204
205wf2q_heap_head()
206{
207	atf_set descr 'Test WF2Q+, attempting to provoke use-after-free'
208	atf_set require.user root
209}
210
211wf2q_heap_body()
212{
213	fw=$1
214	firewall_init $fw
215	dummynet_init $fw
216
217       j=dummynet_wf2q_heap_${fw}_
218
219       epair=$(vnet_mkepair)
220       epair_other=$(vnet_mkepair)
221       vnet_mkjail ${j}a ${epair}a
222       vnet_mkjail ${j}b ${epair}b ${epair_other}b
223
224       jexec ${j}a ifconfig ${epair}a up mtu 9000
225       va=$(jexec ${j}a ifconfig vlan create vlan 42 vlandev ${epair}a)
226       jexec ${j}a ifconfig ${va} 192.0.2.1/24 up #mtu 8000
227
228       jexec ${j}b ifconfig ${epair}b up mtu 9000
229       vb=$(jexec ${j}b ifconfig vlan create vlan 42 vlandev ${epair}b)
230       jexec ${j}b ifconfig ${vb} 192.0.2.2/24 up #mtu 8000
231       jexec ${j}b ifconfig ${epair_other}b up
232
233       # Sanity check
234       atf_check -s exit:0 -o ignore \
235           jexec ${j}b ping -c 1 192.0.2.1
236
237       jexec ${j}b dnctl pipe 1 config bw 10Mb queue 100 delay 500 droptail
238       jexec ${j}b dnctl sched 1 config pipe 1 type wf2q+
239       jexec ${j}b dnctl queue 1 config pipe 1 droptail
240
241       firewall_config ${j}b ${fw} \
242               "pf"    \
243                       "pass dnqueue 1"
244
245       jexec ${j}a ping -f 192.0.2.2 &
246       sleep 1
247
248       jexec ${j}b ifconfig ${vb} destroy
249
250       sleep 2
251}
252
253wf2q_heap_cleanup()
254{
255	firewall_cleanup $1
256}
257
258queue_head()
259{
260	atf_set descr 'Basic queue test'
261	atf_set require.user root
262}
263
264queue_body()
265{
266	fw=$1
267
268	if [ $fw = "ipfw" ] && [ "$(atf_config_get ci false)" = "true" ]; then
269		atf_skip "https://bugs.freebsd.org/264805"
270	fi
271
272	firewall_init $fw
273	dummynet_init $fw
274
275	epair=$(vnet_mkepair)
276	vnet_mkjail alcatraz ${epair}b
277
278	ifconfig ${epair}a 192.0.2.1/24 up
279	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
280	jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \
281	    $(atf_get_srcdir)/../pf/echo_inetd.conf
282
283	# Sanity check
284	atf_check -s exit:0 -o ignore ping -i .1 -c 3 -s 1200 192.0.2.2
285	reply=$(echo "foo" | nc -N 192.0.2.2 7)
286	if [ "$reply" != "foo" ];
287	then
288		atf_fail "Echo sanity check failed"
289	fi
290
291	jexec alcatraz dnctl pipe 1 config bw 1MByte/s
292	jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+
293	jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all
294	jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all
295
296	firewall_config alcatraz ${fw} \
297		"ipfw"	\
298			"ipfw add 1000 queue 100 tcp from 192.0.2.2 to any out" \
299			"ipfw add 1001 queue 200 icmp from 192.0.2.2 to any out" \
300			"ipfw add 1002 allow ip from any to any" \
301		"pf"	\
302			"pass in proto tcp dnqueue (0, 100)" \
303			"pass in proto icmp dnqueue (0, 200)"
304
305	# Single ping succeeds
306	atf_check -s exit:0 -o ignore ping -c 1 192.0.2.2
307
308	# Unsaturated TCP succeeds
309	reply=$(echo "foo" | nc -w 5 -N 192.0.2.2 7)
310	if [ "$reply" != "foo" ];
311	then
312		atf_fail "Unsaturated echo failed"
313	fi
314
315	# Saturate the link
316	ping -f -s 1300 192.0.2.2 &
317
318	# Allow this to fill the queue
319	sleep 1
320
321	# TCP should still just pass
322	fails=0
323	for i in `seq 1 3`
324	do
325		result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c)
326		if [ $result -ne 2048000 ];
327		then
328			echo "Failed to prioritise TCP traffic. Got only $result bytes"
329			fails=$(( ${fails} + 1 ))
330		fi
331	done
332	if [ ${fails} -gt 0 ];
333	then
334		atf_fail "We failed prioritisation ${fails} times"
335	fi
336
337	# This will fail if we reverse the pola^W priority
338	firewall_config alcatraz ${fw} \
339		"ipfw"	\
340			"ipfw add 1000 queue 200 tcp from 192.0.2.2 to any out" \
341			"ipfw add 1001 queue 100 icmp from 192.0.2.2 to any out" \
342			"ipfw add 1002 allow ip from any to any" \
343		"pf"	\
344			"pass in proto tcp dnqueue (0, 200)" \
345			"pass in proto icmp dnqueue (0, 100)"
346
347	jexec alcatraz ping -f -s 1300 192.0.2.1 &
348	sleep 1
349
350	fails=0
351	for i in `seq 1 3`
352	do
353		result=$(dd if=/dev/zero bs=1024 count=2000 | timeout 3 nc -w 5 -N 192.0.2.2 7 | wc -c)
354		if [ $result -ne 2048000 ];
355		then
356			echo "Failed to prioritise TCP traffic. Got only $result bytes"
357			fails=$(( ${fails} + 1 ))
358		fi
359	done
360	if [ ${fails} -lt 3 ];
361	then
362		atf_fail "We failed reversed prioritisation only ${fails} times."
363	fi
364}
365
366queue_cleanup()
367{
368	firewall_cleanup $1
369}
370
371queue_v6_head()
372{
373	atf_set descr 'Basic queue test'
374	atf_set require.user root
375}
376
377queue_v6_body()
378{
379	fw=$1
380	firewall_init $fw
381	dummynet_init $fw
382
383	epair=$(vnet_mkepair)
384	vnet_mkjail alcatraz ${epair}b
385
386	ifconfig ${epair}a inet6 2001:db8:42::1/64 no_dad up
387	jexec alcatraz ifconfig ${epair}b inet6 2001:db8:42::2 no_dad up
388	jexec alcatraz /usr/sbin/inetd -p inetd-alcatraz.pid \
389	    $(atf_get_srcdir)/../pf/echo_inetd.conf
390
391	# Sanity check
392	atf_check -s exit:0 -o ignore ping6 -i .1 -c 3 -s 1200 2001:db8:42::2
393	reply=$(echo "foo" | nc -N 2001:db8:42::2 7)
394	if [ "$reply" != "foo" ];
395	then
396		atf_fail "Echo sanity check failed"
397	fi
398
399	jexec alcatraz dnctl pipe 1 config bw 1MByte/s
400	jexec alcatraz dnctl sched 1 config pipe 1 type wf2q+
401	jexec alcatraz dnctl queue 100 config sched 1 weight 99 mask all
402	jexec alcatraz dnctl queue 200 config sched 1 weight 1 mask all
403
404	firewall_config alcatraz ${fw} \
405		"ipfw"	\
406			"ipfw add 1001 queue 100 tcp from 2001:db8:42::2 to any out" \
407			"ipfw add 1000 queue 200 ipv6-icmp from 2001:db8:42::2 to any out" \
408			"ipfw add 1002 allow ip6 from any to any" \
409		"pf" \
410			"pass in proto tcp dnqueue (0, 100)"	\
411			"pass in proto icmp6 dnqueue (0, 200)"
412
413	# Single ping succeeds
414	atf_check -s exit:0 -o ignore ping6 -c 1 2001:db8:42::2
415
416	# Unsaturated TCP succeeds
417	reply=$(echo "foo" | nc -w 5 -N 2001:db8:42::2 7)
418	if [ "$reply" != "foo" ];
419	then
420		atf_fail "Unsaturated echo failed"
421	fi
422
423	# Saturate the link
424	ping6 -f -s 1200 2001:db8:42::2 &
425
426	# Allow this to fill the queue
427	sleep 1
428
429	# TCP should still just pass
430	fails=0
431	for i in `seq 1 3`
432	do
433		result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c)
434		if [ $result -ne 1024000 ];
435		then
436			echo "Failed to prioritise TCP traffic. Got only $result bytes"
437			fails=$(( ${fails} + 1 ))
438		fi
439	done
440	if [ ${fails} -gt 0 ];
441	then
442		atf_fail "We failed prioritisation ${fails} times"
443	fi
444
445	# What happens if we prioritise ICMP over TCP?
446	firewall_config alcatraz ${fw} \
447		"ipfw"	\
448			"ipfw add 1001 queue 200 tcp from 2001:db8:42::2 to any out" \
449			"ipfw add 1000 queue 100 ipv6-icmp from 2001:db8:42::2 to any out" \
450			"ipfw add 1002 allow ip6 from any to any" \
451		"pf" \
452			"pass in proto tcp dnqueue (0, 200)"	\
453			"pass in proto icmp6 dnqueue (0, 100)"
454
455	fails=0
456	for i in `seq 1 3`
457	do
458		result=$(dd if=/dev/zero bs=1024 count=1000 | timeout 3 nc -w 5 -N 2001:db8:42::2 7 | wc -c)
459		if [ $result -ne 1024000 ];
460		then
461			echo "Failed to prioritise TCP traffic. Got only $result bytes"
462			fails=$(( ${fails} + 1 ))
463		fi
464	done
465	if [ ${fails} -lt 3 ];
466	then
467		atf_fail "We failed reversed prioritisation only ${fails} times."
468	fi
469}
470
471queue_v6_cleanup()
472{
473	firewall_cleanup $1
474}
475
476nat_head()
477{
478	atf_set descr 'Basic dummynet + NAT test'
479	atf_set require.user root
480}
481
482nat_body()
483{
484	fw=$1
485	firewall_init $fw
486	dummynet_init $fw
487	nat_init $fw
488
489	epair=$(vnet_mkepair)
490	epair_two=$(vnet_mkepair)
491
492	ifconfig ${epair}a 192.0.2.2/24 up
493	route add -net 198.51.100.0/24 192.0.2.1
494
495	vnet_mkjail gw ${epair}b ${epair_two}a
496	jexec gw ifconfig ${epair}b 192.0.2.1/24 up
497	jexec gw ifconfig ${epair_two}a 198.51.100.1/24 up
498	jexec gw sysctl net.inet.ip.forwarding=1
499
500	vnet_mkjail srv ${epair_two}b
501	jexec srv ifconfig ${epair_two}b 198.51.100.2/24 up
502
503	jexec gw dnctl pipe 1 config bw 300Byte/s
504
505	firewall_config gw $fw \
506		"pf"	\
507			"nat on ${epair_two}a inet from 192.0.2.0/24 to any -> (${epair_two}a)" \
508			"pass dnpipe 1"
509
510	# We've deliberately not set a route to 192.0.2.0/24 on srv, so the
511	# only way it can respond to this is if NAT is applied correctly.
512	atf_check -s exit:0 -o ignore ping -c 1 198.51.100.2
513}
514
515nat_cleanup()
516{
517	firewall_cleanup $1
518}
519
520pls_basic_head()
521{
522	atf_set descr 'Basic dummynet packet loss rate test'
523	atf_set require.user root
524}
525
526pls_basic_body()
527{
528	fw=$1
529	firewall_init $fw
530	dummynet_init $fw
531
532	epair=$(vnet_mkepair)
533	vnet_mkjail alcatraz ${epair}b
534
535	ifconfig ${epair}a 192.0.2.1/24 up
536	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
537
538	firewall_config alcatraz ${fw} \
539		"ipfw"	\
540			"ipfw add 65432 ip from any to any" \
541		"pf"	\
542			"pass on ${epair}b"
543
544	# Sanity check
545	atf_check -s exit:0 -o match:'100 packets transmitted, 100 packets received' ping -i .1 -c 100 192.0.2.2
546
547	jexec alcatraz dnctl pipe 1 config plr 0.1
548
549	firewall_config alcatraz ${fw} \
550		"ipfw"	\
551			"ipfw add 1000 pipe 1 ip from 192.0.2.1 to 192.0.2.2" \
552		"pf"	\
553			"pass on ${epair}b dnpipe 1"
554
555	# check if the expected number of pings
556	# are dropped (84 - 96 responses).
557	# repeat up to 6 times if the initial
558	# checks fail
559	atf_check -s exit:0 -o match:'100 packets transmitted, (8[4-9]|9[0-6]) packets received' -r 6:10 ping -i 0.010 -c 100 192.0.2.2
560}
561
562pls_basic_cleanup()
563{
564	firewall_cleanup $1
565}
566
567pls_gilbert_head()
568{
569	atf_set descr 'dummynet Gilbert-Elliott packet loss model test'
570	atf_set require.user root
571}
572
573pls_gilbert_body()
574{
575	fw=$1
576	firewall_init $fw
577	dummynet_init $fw
578
579	epair=$(vnet_mkepair)
580	vnet_mkjail alcatraz ${epair}b
581
582	ifconfig ${epair}a 192.0.2.1/24 up
583	jexec alcatraz ifconfig ${epair}b 192.0.2.2/24 up
584
585	firewall_config alcatraz ${fw} \
586		"ipfw"	\
587			"ipfw add 65432 ip from any to any" \
588		"pf"	\
589			"pass on ${epair}b"
590
591	# Sanity check
592	atf_check -s exit:0 -o match:'100 packets transmitted, 100 packets received' ping -i .1 -c 100 192.0.2.2
593
594	jexec alcatraz dnctl pipe 1 config plr 0.01,0.1,0.8,0.2
595
596	firewall_config alcatraz ${fw} \
597		"ipfw"	\
598			"ipfw add 1000 pipe 1 ip from 192.0.2.1 to 192.0.2.2" \
599		"pf"	\
600			"pass on ${epair}b dnpipe 1"
601
602	# check if the expected number of pings
603	# are dropped (70 - 85 responses).
604	# repeat up to 6 times if the initial
605	# checks fail
606	atf_check -s exit:0 -o match:'100 packets transmitted, (7[0-9]|8[0-5]) packets received' -r 6:10 ping -i 0.010 -c 100 192.0.2.2
607}
608
609pls_gilbert_cleanup()
610{
611	firewall_cleanup $1
612}
613
614
615
616setup_tests		\
617	interface_removal	\
618		ipfw	\
619		pf	\
620	pipe		\
621		ipfw	\
622		pf	\
623	pipe_v6		\
624		ipfw	\
625		pf	\
626	codel		\
627		ipfw	\
628		pf	\
629	wf2q_heap	\
630		pf	\
631	queue		\
632		ipfw	\
633		pf	\
634	queue_v6	\
635		ipfw	\
636		pf	\
637	nat		\
638		pf	\
639	pls_basic	\
640		ipfw	\
641		pf	\
642	pls_gilbert	\
643		ipfw	\
644		pf
645