1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1997, Stefan Esser <se@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice unmodified, this list of conditions, and the following 12 * disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include "opt_cpu.h" 33 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/bus.h> 37 #include <sys/kernel.h> 38 #include <sys/malloc.h> 39 #include <sys/module.h> 40 #include <sys/rman.h> 41 #include <sys/sysctl.h> 42 43 #include <dev/pci/pcivar.h> 44 #include <dev/pci/pcireg.h> 45 #include <dev/pci/pcib_private.h> 46 #include <isa/isavar.h> 47 #ifdef CPU_ELAN 48 #include <machine/md_var.h> 49 #endif 50 #include <x86/legacyvar.h> 51 #include <machine/pci_cfgreg.h> 52 #include <machine/resource.h> 53 54 #include "pcib_if.h" 55 56 int 57 legacy_pcib_maxslots(device_t dev) 58 { 59 return 31; 60 } 61 62 /* read configuration space register */ 63 64 uint32_t 65 legacy_pcib_read_config(device_t dev, u_int bus, u_int slot, u_int func, 66 u_int reg, int bytes) 67 { 68 return(pci_cfgregread(bus, slot, func, reg, bytes)); 69 } 70 71 /* write configuration space register */ 72 73 void 74 legacy_pcib_write_config(device_t dev, u_int bus, u_int slot, u_int func, 75 u_int reg, uint32_t data, int bytes) 76 { 77 pci_cfgregwrite(bus, slot, func, reg, data, bytes); 78 } 79 80 /* route interrupt */ 81 82 static int 83 legacy_pcib_route_interrupt(device_t pcib, device_t dev, int pin) 84 { 85 86 #ifdef __HAVE_PIR 87 return (pci_pir_route_interrupt(pci_get_bus(dev), pci_get_slot(dev), 88 pci_get_function(dev), pin)); 89 #else 90 /* No routing possible */ 91 return (PCI_INVALID_IRQ); 92 #endif 93 } 94 95 /* Pass MSI requests up to the nexus. */ 96 97 int 98 legacy_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, 99 int *irqs) 100 { 101 device_t bus; 102 103 bus = device_get_parent(pcib); 104 return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount, 105 irqs)); 106 } 107 108 int 109 legacy_pcib_alloc_msix(device_t pcib, device_t dev, int *irq) 110 { 111 device_t bus; 112 113 bus = device_get_parent(pcib); 114 return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq)); 115 } 116 117 int 118 legacy_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, 119 uint32_t *data) 120 { 121 device_t bus, hostb; 122 int error, func, slot; 123 124 bus = device_get_parent(pcib); 125 error = PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data); 126 if (error) 127 return (error); 128 129 slot = legacy_get_pcislot(pcib); 130 func = legacy_get_pcifunc(pcib); 131 if (slot == -1 || func == -1) 132 return (0); 133 hostb = pci_find_bsf(0, slot, func); 134 KASSERT(hostb != NULL, ("%s: missing hostb for 0:%d:%d", __func__, 135 slot, func)); 136 pci_ht_map_msi(hostb, *addr); 137 return (0); 138 } 139 140 static const char * 141 legacy_pcib_is_host_bridge(int bus, int slot, int func, 142 uint32_t id, uint8_t class, uint8_t subclass, 143 uint8_t *busnum) 144 { 145 #ifdef __i386__ 146 const char *s = NULL; 147 static uint8_t pxb[4]; /* hack for 450nx */ 148 149 *busnum = 0; 150 151 switch (id) { 152 case 0x12258086: 153 s = "Intel 824?? host to PCI bridge"; 154 /* XXX This is a guess */ 155 /* *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x41, 1); */ 156 *busnum = bus; 157 break; 158 case 0x71208086: 159 s = "Intel 82810 (i810 GMCH) Host To Hub bridge"; 160 break; 161 case 0x71228086: 162 s = "Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge"; 163 break; 164 case 0x71248086: 165 s = "Intel 82810E (i810E GMCH) Host To Hub bridge"; 166 break; 167 case 0x11308086: 168 s = "Intel 82815 (i815 GMCH) Host To Hub bridge"; 169 break; 170 case 0x71808086: 171 s = "Intel 82443LX (440 LX) host to PCI bridge"; 172 break; 173 case 0x71908086: 174 s = "Intel 82443BX (440 BX) host to PCI bridge"; 175 break; 176 case 0x71928086: 177 s = "Intel 82443BX host to PCI bridge (AGP disabled)"; 178 break; 179 case 0x71948086: 180 s = "Intel 82443MX host to PCI bridge"; 181 break; 182 case 0x71a08086: 183 s = "Intel 82443GX host to PCI bridge"; 184 break; 185 case 0x71a18086: 186 s = "Intel 82443GX host to AGP bridge"; 187 break; 188 case 0x71a28086: 189 s = "Intel 82443GX host to PCI bridge (AGP disabled)"; 190 break; 191 case 0x84c48086: 192 s = "Intel 82454KX/GX (Orion) host to PCI bridge"; 193 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x4a, 1); 194 break; 195 case 0x84ca8086: 196 /* 197 * For the 450nx chipset, there is a whole bundle of 198 * things pretending to be host bridges. The MIOC will 199 * be seen first and isn't really a pci bridge (the 200 * actual buses are attached to the PXB's). We need to 201 * read the registers of the MIOC to figure out the 202 * bus numbers for the PXB channels. 203 * 204 * Since the MIOC doesn't have a pci bus attached, we 205 * pretend it wasn't there. 206 */ 207 pxb[0] = legacy_pcib_read_config(0, bus, slot, func, 208 0xd0, 1); /* BUSNO[0] */ 209 pxb[1] = legacy_pcib_read_config(0, bus, slot, func, 210 0xd1, 1) + 1; /* SUBA[0]+1 */ 211 pxb[2] = legacy_pcib_read_config(0, bus, slot, func, 212 0xd3, 1); /* BUSNO[1] */ 213 pxb[3] = legacy_pcib_read_config(0, bus, slot, func, 214 0xd4, 1) + 1; /* SUBA[1]+1 */ 215 return NULL; 216 case 0x84cb8086: 217 switch (slot) { 218 case 0x12: 219 s = "Intel 82454NX PXB#0, Bus#A"; 220 *busnum = pxb[0]; 221 break; 222 case 0x13: 223 s = "Intel 82454NX PXB#0, Bus#B"; 224 *busnum = pxb[1]; 225 break; 226 case 0x14: 227 s = "Intel 82454NX PXB#1, Bus#A"; 228 *busnum = pxb[2]; 229 break; 230 case 0x15: 231 s = "Intel 82454NX PXB#1, Bus#B"; 232 *busnum = pxb[3]; 233 break; 234 } 235 break; 236 case 0x1A308086: 237 s = "Intel 82845 Host to PCI bridge"; 238 break; 239 240 /* AMD -- vendor 0x1022 */ 241 case 0x30001022: 242 s = "AMD Elan SC520 host to PCI bridge"; 243 #ifdef CPU_ELAN 244 init_AMD_Elan_sc520(); 245 #else 246 printf( 247 "*** WARNING: missing CPU_ELAN -- timekeeping may be wrong\n"); 248 #endif 249 break; 250 case 0x70061022: 251 s = "AMD-751 host to PCI bridge"; 252 break; 253 case 0x700e1022: 254 s = "AMD-761 host to PCI bridge"; 255 break; 256 257 /* SiS -- vendor 0x1039 */ 258 case 0x04961039: 259 s = "SiS 85c496"; 260 break; 261 case 0x04061039: 262 s = "SiS 85c501"; 263 break; 264 case 0x06011039: 265 s = "SiS 85c601"; 266 break; 267 case 0x55911039: 268 s = "SiS 5591 host to PCI bridge"; 269 break; 270 case 0x00011039: 271 s = "SiS 5591 host to AGP bridge"; 272 break; 273 274 /* VLSI -- vendor 0x1004 */ 275 case 0x00051004: 276 s = "VLSI 82C592 Host to PCI bridge"; 277 break; 278 279 /* XXX Here is MVP3, I got the datasheet but NO M/B to test it */ 280 /* totally. Please let me know if anything wrong. -F */ 281 /* XXX need info on the MVP3 -- any takers? */ 282 case 0x05981106: 283 s = "VIA 82C598MVP (Apollo MVP3) host bridge"; 284 break; 285 286 /* AcerLabs -- vendor 0x10b9 */ 287 /* Funny : The datasheet told me vendor id is "10b8",sub-vendor */ 288 /* id is '10b9" but the register always shows "10b9". -Foxfair */ 289 case 0x154110b9: 290 s = "AcerLabs M1541 (Aladdin-V) PCI host bridge"; 291 break; 292 293 /* OPTi -- vendor 0x1045 */ 294 case 0xc7011045: 295 s = "OPTi 82C700 host to PCI bridge"; 296 break; 297 case 0xc8221045: 298 s = "OPTi 82C822 host to PCI Bridge"; 299 break; 300 301 /* ServerWorks -- vendor 0x1166 */ 302 case 0x00051166: 303 s = "ServerWorks NB6536 2.0HE host to PCI bridge"; 304 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 305 break; 306 307 case 0x00061166: 308 /* FALLTHROUGH */ 309 case 0x00081166: 310 /* FALLTHROUGH */ 311 case 0x02011166: 312 /* FALLTHROUGH */ 313 case 0x010f1014: /* IBM re-badged ServerWorks chipset */ 314 s = "ServerWorks host to PCI bridge"; 315 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 316 break; 317 318 case 0x00091166: 319 s = "ServerWorks NB6635 3.0LE host to PCI bridge"; 320 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 321 break; 322 323 case 0x00101166: 324 s = "ServerWorks CIOB30 host to PCI bridge"; 325 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 326 break; 327 328 case 0x00111166: 329 /* FALLTHROUGH */ 330 case 0x03021014: /* IBM re-badged ServerWorks chipset */ 331 s = "ServerWorks CMIC-HE host to PCI-X bridge"; 332 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 333 break; 334 335 /* XXX unknown chipset, but working */ 336 case 0x00171166: 337 /* FALLTHROUGH */ 338 case 0x01011166: 339 case 0x01101166: 340 case 0x02251166: 341 s = "ServerWorks host to PCI bridge(unknown chipset)"; 342 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); 343 break; 344 345 /* Compaq/HP -- vendor 0x0e11 */ 346 case 0x60100e11: 347 s = "Compaq/HP Model 6010 HotPlug PCI Bridge"; 348 *busnum = legacy_pcib_read_config(0, bus, slot, func, 0xc8, 1); 349 break; 350 351 /* Integrated Micro Solutions -- vendor 0x10e0 */ 352 case 0x884910e0: 353 s = "Integrated Micro Solutions VL Bridge"; 354 break; 355 356 default: 357 if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST) 358 s = "Host to PCI bridge"; 359 break; 360 } 361 362 return s; 363 #else 364 const char *s = NULL; 365 366 *busnum = 0; 367 if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST) 368 s = "Host to PCI bridge"; 369 return s; 370 #endif 371 } 372 373 /* 374 * Scan the first pci bus for host-pci bridges and add pcib instances 375 * to the nexus for each bridge. 376 */ 377 static void 378 legacy_pcib_identify(driver_t *driver, device_t parent) 379 { 380 int bus, slot, func; 381 uint8_t hdrtype; 382 int found = 0; 383 int pcifunchigh; 384 int found824xx = 0; 385 int found_orion = 0; 386 device_t child; 387 devclass_t pci_devclass; 388 389 if (pci_cfgregopen() == 0) 390 return; 391 /* 392 * Check to see if we haven't already had a PCI bus added 393 * via some other means. If we have, bail since otherwise 394 * we're going to end up duplicating it. 395 */ 396 if ((pci_devclass = devclass_find("pci")) && 397 devclass_get_device(pci_devclass, 0)) 398 return; 399 400 bus = 0; 401 retry: 402 for (slot = 0; slot <= PCI_SLOTMAX; slot++) { 403 func = 0; 404 hdrtype = legacy_pcib_read_config(0, bus, slot, func, 405 PCIR_HDRTYPE, 1); 406 /* 407 * When enumerating bus devices, the standard says that 408 * one should check the header type and ignore the slots whose 409 * header types that the software doesn't know about. We use 410 * this to filter out devices. 411 */ 412 if ((hdrtype & PCIM_HDRTYPE) > PCI_MAXHDRTYPE) 413 continue; 414 if ((hdrtype & PCIM_MFDEV) && 415 (!found_orion || hdrtype != 0xff)) 416 pcifunchigh = PCI_FUNCMAX; 417 else 418 pcifunchigh = 0; 419 for (func = 0; func <= pcifunchigh; func++) { 420 /* 421 * Read the IDs and class from the device. 422 */ 423 uint32_t id; 424 uint8_t class, subclass, busnum; 425 const char *s; 426 device_t *devs; 427 int ndevs, i; 428 429 id = legacy_pcib_read_config(0, bus, slot, func, 430 PCIR_DEVVENDOR, 4); 431 if (id == -1) 432 continue; 433 class = legacy_pcib_read_config(0, bus, slot, func, 434 PCIR_CLASS, 1); 435 subclass = legacy_pcib_read_config(0, bus, slot, func, 436 PCIR_SUBCLASS, 1); 437 438 s = legacy_pcib_is_host_bridge(bus, slot, func, 439 id, class, subclass, 440 &busnum); 441 if (s == NULL) 442 continue; 443 444 /* 445 * Check to see if the physical bus has already 446 * been seen. Eg: hybrid 32 and 64 bit host 447 * bridges to the same logical bus. 448 */ 449 if (device_get_children(parent, &devs, &ndevs) == 0) { 450 for (i = 0; s != NULL && i < ndevs; i++) { 451 if (strcmp(device_get_name(devs[i]), 452 "pcib") != 0) 453 continue; 454 if (legacy_get_pcibus(devs[i]) == busnum) 455 s = NULL; 456 } 457 free(devs, M_TEMP); 458 } 459 460 if (s == NULL) 461 continue; 462 /* 463 * Add at priority 100 to make sure we 464 * go after any motherboard resources 465 */ 466 child = BUS_ADD_CHILD(parent, 100, 467 "pcib", busnum); 468 device_set_desc(child, s); 469 legacy_set_pcibus(child, busnum); 470 legacy_set_pcislot(child, slot); 471 legacy_set_pcifunc(child, func); 472 473 found = 1; 474 if (id == 0x12258086) 475 found824xx = 1; 476 if (id == 0x84c48086) 477 found_orion = 1; 478 } 479 } 480 if (found824xx && bus == 0) { 481 bus++; 482 goto retry; 483 } 484 485 /* 486 * Make sure we add at least one bridge since some old 487 * hardware doesn't actually have a host-pci bridge device. 488 * Note that pci_cfgregopen() thinks we have PCI devices.. 489 */ 490 if (!found) { 491 #ifndef NO_LEGACY_PCIB 492 if (bootverbose) 493 printf( 494 "legacy_pcib_identify: no bridge found, adding pcib0 anyway\n"); 495 child = BUS_ADD_CHILD(parent, 100, "pcib", 0); 496 legacy_set_pcibus(child, 0); 497 #endif 498 } 499 } 500 501 static int 502 legacy_pcib_probe(device_t dev) 503 { 504 505 if (pci_cfgregopen() == 0) 506 return ENXIO; 507 return -100; 508 } 509 510 static int 511 legacy_pcib_attach(device_t dev) 512 { 513 #ifdef __HAVE_PIR 514 device_t pir; 515 int bus; 516 517 bus = pcib_get_bus(dev); 518 /* 519 * Look for a PCI BIOS interrupt routing table as that will be 520 * our method of routing interrupts if we have one. 521 */ 522 if (pci_pir_probe(bus, 0)) { 523 pir = BUS_ADD_CHILD(device_get_parent(dev), 0, "pir", 0); 524 if (pir != NULL) 525 device_probe_and_attach(pir); 526 } 527 #endif 528 device_add_child(dev, "pci", -1); 529 return bus_generic_attach(dev); 530 } 531 532 int 533 legacy_pcib_read_ivar(device_t dev, device_t child, int which, 534 uintptr_t *result) 535 { 536 537 switch (which) { 538 case PCIB_IVAR_DOMAIN: 539 *result = 0; 540 return 0; 541 case PCIB_IVAR_BUS: 542 *result = legacy_get_pcibus(dev); 543 return 0; 544 } 545 return ENOENT; 546 } 547 548 int 549 legacy_pcib_write_ivar(device_t dev, device_t child, int which, 550 uintptr_t value) 551 { 552 553 switch (which) { 554 case PCIB_IVAR_DOMAIN: 555 return EINVAL; 556 case PCIB_IVAR_BUS: 557 legacy_set_pcibus(dev, value); 558 return 0; 559 } 560 return ENOENT; 561 } 562 563 /* 564 * Helper routine for x86 Host-PCI bridge driver resource allocation. 565 * This is used to adjust the start address of wildcard allocation 566 * requests to avoid low addresses that are known to be problematic. 567 * 568 * If no memory preference is given, use upper 32MB slot most BIOSes 569 * use for their memory window. This is typically only used on older 570 * laptops that don't have PCI buses behind a PCI bridge, so assuming 571 * > 32MB is likely OK. 572 * 573 * However, this can cause problems for other chipsets, so we make 574 * this tunable by hw.pci.host_mem_start. 575 */ 576 SYSCTL_DECL(_hw_pci); 577 578 static unsigned long host_mem_start = 0x80000000; 579 SYSCTL_ULONG(_hw_pci, OID_AUTO, host_mem_start, CTLFLAG_RDTUN, &host_mem_start, 580 0, "Limit the host bridge memory to being above this address."); 581 582 rman_res_t 583 hostb_alloc_start(int type, rman_res_t start, rman_res_t end, rman_res_t count) 584 { 585 586 if (start + count - 1 != end) { 587 if (type == SYS_RES_MEMORY && start < host_mem_start) 588 start = host_mem_start; 589 if (type == SYS_RES_IOPORT && start < 0x1000) 590 start = 0x1000; 591 } 592 return (start); 593 } 594 595 struct resource * 596 legacy_pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, 597 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 598 { 599 600 #if defined(NEW_PCIB) && defined(PCI_RES_BUS) 601 if (type == PCI_RES_BUS) 602 return (pci_domain_alloc_bus(0, child, rid, start, end, count, 603 flags)); 604 #endif 605 start = hostb_alloc_start(type, start, end, count); 606 return (bus_generic_alloc_resource(dev, child, type, rid, start, end, 607 count, flags)); 608 } 609 610 #if defined(NEW_PCIB) && defined(PCI_RES_BUS) 611 int 612 legacy_pcib_adjust_resource(device_t dev, device_t child, int type, 613 struct resource *r, rman_res_t start, rman_res_t end) 614 { 615 616 if (type == PCI_RES_BUS) 617 return (pci_domain_adjust_bus(0, child, r, start, end)); 618 return (bus_generic_adjust_resource(dev, child, type, r, start, end)); 619 } 620 621 int 622 legacy_pcib_release_resource(device_t dev, device_t child, int type, int rid, 623 struct resource *r) 624 { 625 626 if (type == PCI_RES_BUS) 627 return (pci_domain_release_bus(0, child, rid, r)); 628 return (bus_generic_release_resource(dev, child, type, rid, r)); 629 } 630 #endif 631 632 static device_method_t legacy_pcib_methods[] = { 633 /* Device interface */ 634 DEVMETHOD(device_identify, legacy_pcib_identify), 635 DEVMETHOD(device_probe, legacy_pcib_probe), 636 DEVMETHOD(device_attach, legacy_pcib_attach), 637 DEVMETHOD(device_shutdown, bus_generic_shutdown), 638 DEVMETHOD(device_suspend, bus_generic_suspend), 639 DEVMETHOD(device_resume, bus_generic_resume), 640 641 /* Bus interface */ 642 DEVMETHOD(bus_read_ivar, legacy_pcib_read_ivar), 643 DEVMETHOD(bus_write_ivar, legacy_pcib_write_ivar), 644 DEVMETHOD(bus_alloc_resource, legacy_pcib_alloc_resource), 645 #if defined(NEW_PCIB) && defined(PCI_RES_BUS) 646 DEVMETHOD(bus_adjust_resource, legacy_pcib_adjust_resource), 647 DEVMETHOD(bus_release_resource, legacy_pcib_release_resource), 648 #else 649 DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource), 650 DEVMETHOD(bus_release_resource, bus_generic_release_resource), 651 #endif 652 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 653 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 654 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 655 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 656 657 /* pcib interface */ 658 DEVMETHOD(pcib_maxslots, legacy_pcib_maxslots), 659 DEVMETHOD(pcib_read_config, legacy_pcib_read_config), 660 DEVMETHOD(pcib_write_config, legacy_pcib_write_config), 661 DEVMETHOD(pcib_route_interrupt, legacy_pcib_route_interrupt), 662 DEVMETHOD(pcib_alloc_msi, legacy_pcib_alloc_msi), 663 DEVMETHOD(pcib_release_msi, pcib_release_msi), 664 DEVMETHOD(pcib_alloc_msix, legacy_pcib_alloc_msix), 665 DEVMETHOD(pcib_release_msix, pcib_release_msix), 666 DEVMETHOD(pcib_map_msi, legacy_pcib_map_msi), 667 DEVMETHOD(pcib_request_feature, pcib_request_feature_allow), 668 669 DEVMETHOD_END 670 }; 671 672 DEFINE_CLASS_0(pcib, legacy_pcib_driver, legacy_pcib_methods, 1); 673 DRIVER_MODULE(pcib, legacy, legacy_pcib_driver, 0, 0); 674 675 /* 676 * Install placeholder to claim the resources owned by the 677 * PCI bus interface. This could be used to extract the 678 * config space registers in the extreme case where the PnP 679 * ID is available and the PCI BIOS isn't, but for now we just 680 * eat the PnP ID and do nothing else. 681 * 682 * we silence this probe, as it will generally confuse people. 683 */ 684 static struct isa_pnp_id pcibus_pnp_ids[] = { 685 { 0x030ad041 /* PNP0A03 */, "PCI Bus" }, 686 { 0x080ad041 /* PNP0A08 */, "PCIe Bus" }, 687 { 0 } 688 }; 689 690 static int 691 pcibus_pnp_probe(device_t dev) 692 { 693 int result; 694 695 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, pcibus_pnp_ids)) <= 0) 696 device_quiet(dev); 697 return(result); 698 } 699 700 static int 701 pcibus_pnp_attach(device_t dev) 702 { 703 return(0); 704 } 705 706 static device_method_t pcibus_pnp_methods[] = { 707 /* Device interface */ 708 DEVMETHOD(device_probe, pcibus_pnp_probe), 709 DEVMETHOD(device_attach, pcibus_pnp_attach), 710 DEVMETHOD(device_detach, bus_generic_detach), 711 DEVMETHOD(device_shutdown, bus_generic_shutdown), 712 DEVMETHOD(device_suspend, bus_generic_suspend), 713 DEVMETHOD(device_resume, bus_generic_resume), 714 { 0, 0 } 715 }; 716 717 DEFINE_CLASS_0(pcibus_pnp, pcibus_pnp_driver, pcibus_pnp_methods, 1); 718 DRIVER_MODULE(pcibus_pnp, isa, pcibus_pnp_driver, 0, 0); 719 720 #ifdef __HAVE_PIR 721 /* 722 * Provide a PCI-PCI bridge driver for PCI buses behind PCI-PCI bridges 723 * that appear in the PCIBIOS Interrupt Routing Table to use the routing 724 * table for interrupt routing when possible. 725 */ 726 static int pcibios_pcib_probe(device_t bus); 727 728 static device_method_t pcibios_pcib_pci_methods[] = { 729 /* Device interface */ 730 DEVMETHOD(device_probe, pcibios_pcib_probe), 731 732 /* pcib interface */ 733 DEVMETHOD(pcib_route_interrupt, legacy_pcib_route_interrupt), 734 {0, 0} 735 }; 736 737 DEFINE_CLASS_1(pcib, pcibios_pcib_driver, pcibios_pcib_pci_methods, 738 sizeof(struct pcib_softc), pcib_driver); 739 DRIVER_MODULE(pcibios_pcib, pci, pcibios_pcib_driver, 0, 0); 740 ISA_PNP_INFO(pcibus_pnp_ids); 741 742 static int 743 pcibios_pcib_probe(device_t dev) 744 { 745 int bus; 746 747 if ((pci_get_class(dev) != PCIC_BRIDGE) || 748 (pci_get_subclass(dev) != PCIS_BRIDGE_PCI)) 749 return (ENXIO); 750 bus = pci_read_config(dev, PCIR_SECBUS_1, 1); 751 if (bus == 0) 752 return (ENXIO); 753 if (!pci_pir_probe(bus, 1)) 754 return (ENXIO); 755 device_set_desc(dev, "PCIBIOS PCI-PCI bridge"); 756 return (-2000); 757 } 758 #endif 759