1 /*- 2 * Copyright (c) 1990 The Regents of the University of California. 3 * Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org> 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * William Jolitz and Don Ahn. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * from: @(#)clock.c 7.2 (Berkeley) 5/12/91 34 */ 35 36 #include <sys/cdefs.h> 37 __FBSDID("$FreeBSD$"); 38 39 /* 40 * Routines to handle clock hardware. 41 */ 42 43 #include "opt_clock.h" 44 #include "opt_isa.h" 45 #include "opt_mca.h" 46 47 #include <sys/param.h> 48 #include <sys/systm.h> 49 #include <sys/bus.h> 50 #include <sys/lock.h> 51 #include <sys/kdb.h> 52 #include <sys/mutex.h> 53 #include <sys/proc.h> 54 #include <sys/kernel.h> 55 #include <sys/module.h> 56 #include <sys/rman.h> 57 #include <sys/sched.h> 58 #include <sys/smp.h> 59 #include <sys/sysctl.h> 60 #include <sys/timeet.h> 61 #include <sys/timetc.h> 62 63 #include <machine/clock.h> 64 #include <machine/cpu.h> 65 #include <machine/intr_machdep.h> 66 #include <machine/ppireg.h> 67 #include <machine/timerreg.h> 68 #include <x86/init.h> 69 70 #ifdef PC98 71 #include <pc98/pc98/pc98_machdep.h> 72 #else 73 #include <isa/rtc.h> 74 #endif 75 #ifdef DEV_ISA 76 #ifdef PC98 77 #include <pc98/cbus/cbus.h> 78 #else 79 #include <isa/isareg.h> 80 #endif 81 #include <isa/isavar.h> 82 #endif 83 84 #ifdef DEV_MCA 85 #include <i386/bios/mca_machdep.h> 86 #endif 87 88 int clkintr_pending; 89 #ifndef TIMER_FREQ 90 #ifdef PC98 91 #define TIMER_FREQ 2457600 92 #else 93 #define TIMER_FREQ 1193182 94 #endif 95 #endif 96 u_int i8254_freq = TIMER_FREQ; 97 TUNABLE_INT("hw.i8254.freq", &i8254_freq); 98 int i8254_max_count; 99 static int i8254_timecounter = 1; 100 101 struct mtx clock_lock; 102 static struct intsrc *i8254_intsrc; 103 static uint16_t i8254_lastcount; 104 static uint16_t i8254_offset; 105 static int (*i8254_pending)(struct intsrc *); 106 static int i8254_ticked; 107 108 struct attimer_softc { 109 int intr_en; 110 int port_rid, intr_rid; 111 struct resource *port_res; 112 struct resource *intr_res; 113 #ifdef PC98 114 int port_rid2; 115 struct resource *port_res2; 116 #endif 117 void *intr_handler; 118 struct timecounter tc; 119 struct eventtimer et; 120 int mode; 121 #define MODE_STOP 0 122 #define MODE_PERIODIC 1 123 #define MODE_ONESHOT 2 124 uint32_t period; 125 }; 126 static struct attimer_softc *attimer_sc = NULL; 127 128 static int timer0_period = -2; 129 static int timer0_mode = 0xffff; 130 static int timer0_last = 0xffff; 131 132 /* Values for timerX_state: */ 133 #define RELEASED 0 134 #define RELEASE_PENDING 1 135 #define ACQUIRED 2 136 #define ACQUIRE_PENDING 3 137 138 static u_char timer2_state; 139 140 static unsigned i8254_get_timecount(struct timecounter *tc); 141 static void set_i8254_freq(int mode, uint32_t period); 142 143 void 144 clock_init(void) 145 { 146 /* Init the clock lock */ 147 mtx_init(&clock_lock, "clk", NULL, MTX_SPIN | MTX_NOPROFILE); 148 /* Init the clock in order to use DELAY */ 149 init_ops.early_clock_source_init(); 150 } 151 152 static int 153 clkintr(void *arg) 154 { 155 struct attimer_softc *sc = (struct attimer_softc *)arg; 156 157 if (i8254_timecounter && sc->period != 0) { 158 mtx_lock_spin(&clock_lock); 159 if (i8254_ticked) 160 i8254_ticked = 0; 161 else { 162 i8254_offset += i8254_max_count; 163 i8254_lastcount = 0; 164 } 165 clkintr_pending = 0; 166 mtx_unlock_spin(&clock_lock); 167 } 168 169 if (sc && sc->et.et_active && sc->mode != MODE_STOP) 170 sc->et.et_event_cb(&sc->et, sc->et.et_arg); 171 172 #ifdef DEV_MCA 173 /* Reset clock interrupt by asserting bit 7 of port 0x61 */ 174 if (MCA_system) 175 outb(0x61, inb(0x61) | 0x80); 176 #endif 177 return (FILTER_HANDLED); 178 } 179 180 int 181 timer_spkr_acquire(void) 182 { 183 int mode; 184 185 #ifdef PC98 186 mode = TIMER_SEL1 | TIMER_SQWAVE | TIMER_16BIT; 187 #else 188 mode = TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT; 189 #endif 190 191 if (timer2_state != RELEASED) 192 return (-1); 193 timer2_state = ACQUIRED; 194 195 /* 196 * This access to the timer registers is as atomic as possible 197 * because it is a single instruction. We could do better if we 198 * knew the rate. Use of splclock() limits glitches to 10-100us, 199 * and this is probably good enough for timer2, so we aren't as 200 * careful with it as with timer0. 201 */ 202 #ifdef PC98 203 outb(TIMER_MODE, TIMER_SEL1 | (mode & 0x3f)); 204 #else 205 outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f)); 206 #endif 207 ppi_spkr_on(); /* enable counter2 output to speaker */ 208 return (0); 209 } 210 211 int 212 timer_spkr_release(void) 213 { 214 215 if (timer2_state != ACQUIRED) 216 return (-1); 217 timer2_state = RELEASED; 218 #ifdef PC98 219 outb(TIMER_MODE, TIMER_SEL1 | TIMER_SQWAVE | TIMER_16BIT); 220 #else 221 outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT); 222 #endif 223 ppi_spkr_off(); /* disable counter2 output to speaker */ 224 return (0); 225 } 226 227 void 228 timer_spkr_setfreq(int freq) 229 { 230 231 freq = i8254_freq / freq; 232 mtx_lock_spin(&clock_lock); 233 #ifdef PC98 234 outb(TIMER_CNTR1, freq & 0xff); 235 outb(TIMER_CNTR1, freq >> 8); 236 #else 237 outb(TIMER_CNTR2, freq & 0xff); 238 outb(TIMER_CNTR2, freq >> 8); 239 #endif 240 mtx_unlock_spin(&clock_lock); 241 } 242 243 static int 244 getit(void) 245 { 246 int high, low; 247 248 mtx_lock_spin(&clock_lock); 249 250 /* Select timer0 and latch counter value. */ 251 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); 252 253 low = inb(TIMER_CNTR0); 254 high = inb(TIMER_CNTR0); 255 256 mtx_unlock_spin(&clock_lock); 257 return ((high << 8) | low); 258 } 259 260 /* 261 * Wait "n" microseconds. 262 * Relies on timer 1 counting down from (i8254_freq / hz) 263 * Note: timer had better have been programmed before this is first used! 264 */ 265 void 266 i8254_delay(int n) 267 { 268 int delta, prev_tick, tick, ticks_left; 269 #ifdef DELAYDEBUG 270 int getit_calls = 1; 271 int n1; 272 static int state = 0; 273 274 if (state == 0) { 275 state = 1; 276 for (n1 = 1; n1 <= 10000000; n1 *= 10) 277 DELAY(n1); 278 state = 2; 279 } 280 if (state == 1) 281 printf("DELAY(%d)...", n); 282 #endif 283 /* 284 * Read the counter first, so that the rest of the setup overhead is 285 * counted. Guess the initial overhead is 20 usec (on most systems it 286 * takes about 1.5 usec for each of the i/o's in getit(). The loop 287 * takes about 6 usec on a 486/33 and 13 usec on a 386/20. The 288 * multiplications and divisions to scale the count take a while). 289 * 290 * However, if ddb is active then use a fake counter since reading 291 * the i8254 counter involves acquiring a lock. ddb must not do 292 * locking for many reasons, but it calls here for at least atkbd 293 * input. 294 */ 295 #ifdef KDB 296 if (kdb_active) 297 prev_tick = 1; 298 else 299 #endif 300 prev_tick = getit(); 301 n -= 0; /* XXX actually guess no initial overhead */ 302 /* 303 * Calculate (n * (i8254_freq / 1e6)) without using floating point 304 * and without any avoidable overflows. 305 */ 306 if (n <= 0) 307 ticks_left = 0; 308 else if (n < 256) 309 /* 310 * Use fixed point to avoid a slow division by 1000000. 311 * 39099 = 1193182 * 2^15 / 10^6 rounded to nearest. 312 * 2^15 is the first power of 2 that gives exact results 313 * for n between 0 and 256. 314 */ 315 ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15; 316 else 317 /* 318 * Don't bother using fixed point, although gcc-2.7.2 319 * generates particularly poor code for the long long 320 * division, since even the slow way will complete long 321 * before the delay is up (unless we're interrupted). 322 */ 323 ticks_left = ((u_int)n * (long long)i8254_freq + 999999) 324 / 1000000; 325 326 while (ticks_left > 0) { 327 #ifdef KDB 328 if (kdb_active) { 329 #ifdef PC98 330 outb(0x5f, 0); 331 #else 332 inb(0x84); 333 #endif 334 tick = prev_tick - 1; 335 if (tick <= 0) 336 tick = i8254_max_count; 337 } else 338 #endif 339 tick = getit(); 340 #ifdef DELAYDEBUG 341 ++getit_calls; 342 #endif 343 delta = prev_tick - tick; 344 prev_tick = tick; 345 if (delta < 0) { 346 delta += i8254_max_count; 347 /* 348 * Guard against i8254_max_count being wrong. 349 * This shouldn't happen in normal operation, 350 * but it may happen if set_i8254_freq() is 351 * traced. 352 */ 353 if (delta < 0) 354 delta = 0; 355 } 356 ticks_left -= delta; 357 } 358 #ifdef DELAYDEBUG 359 if (state == 1) 360 printf(" %d calls to getit() at %d usec each\n", 361 getit_calls, (n + 5) / getit_calls); 362 #endif 363 } 364 365 static void 366 set_i8254_freq(int mode, uint32_t period) 367 { 368 int new_count, new_mode; 369 370 mtx_lock_spin(&clock_lock); 371 if (mode == MODE_STOP) { 372 if (i8254_timecounter) { 373 mode = MODE_PERIODIC; 374 new_count = 0x10000; 375 } else 376 new_count = -1; 377 } else { 378 new_count = min(((uint64_t)i8254_freq * period + 379 0x80000000LLU) >> 32, 0x10000); 380 } 381 if (new_count == timer0_period) 382 goto out; 383 i8254_max_count = ((new_count & ~0xffff) != 0) ? 0xffff : new_count; 384 timer0_period = (mode == MODE_PERIODIC) ? new_count : -1; 385 switch (mode) { 386 case MODE_STOP: 387 new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_16BIT; 388 outb(TIMER_MODE, new_mode); 389 outb(TIMER_CNTR0, 0); 390 outb(TIMER_CNTR0, 0); 391 break; 392 case MODE_PERIODIC: 393 new_mode = TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT; 394 outb(TIMER_MODE, new_mode); 395 outb(TIMER_CNTR0, new_count & 0xff); 396 outb(TIMER_CNTR0, new_count >> 8); 397 break; 398 case MODE_ONESHOT: 399 if (new_count < 256 && timer0_last < 256) { 400 new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_LSB; 401 if (new_mode != timer0_mode) 402 outb(TIMER_MODE, new_mode); 403 outb(TIMER_CNTR0, new_count & 0xff); 404 break; 405 } 406 new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_16BIT; 407 if (new_mode != timer0_mode) 408 outb(TIMER_MODE, new_mode); 409 outb(TIMER_CNTR0, new_count & 0xff); 410 outb(TIMER_CNTR0, new_count >> 8); 411 break; 412 default: 413 panic("set_i8254_freq: unknown operational mode"); 414 } 415 timer0_mode = new_mode; 416 timer0_last = new_count; 417 out: 418 mtx_unlock_spin(&clock_lock); 419 } 420 421 static void 422 i8254_restore(void) 423 { 424 425 timer0_period = -2; 426 timer0_mode = 0xffff; 427 timer0_last = 0xffff; 428 if (attimer_sc != NULL) 429 set_i8254_freq(attimer_sc->mode, attimer_sc->period); 430 else 431 set_i8254_freq(MODE_STOP, 0); 432 } 433 434 #ifndef __amd64__ 435 /* 436 * Restore all the timers non-atomically (XXX: should be atomically). 437 * 438 * This function is called from pmtimer_resume() to restore all the timers. 439 * This should not be necessary, but there are broken laptops that do not 440 * restore all the timers on resume. The APM spec was at best vague on the 441 * subject. 442 * pmtimer is used only with the old APM power management, and not with 443 * acpi, which is required for amd64, so skip it in that case. 444 */ 445 void 446 timer_restore(void) 447 { 448 449 i8254_restore(); /* restore i8254_freq and hz */ 450 #ifndef PC98 451 atrtc_restore(); /* reenable RTC interrupts */ 452 #endif 453 } 454 #endif 455 456 /* This is separate from startrtclock() so that it can be called early. */ 457 void 458 i8254_init(void) 459 { 460 461 #ifdef PC98 462 if (pc98_machine_type & M_8M) 463 i8254_freq = 1996800L; /* 1.9968 MHz */ 464 #endif 465 set_i8254_freq(MODE_STOP, 0); 466 } 467 468 void 469 startrtclock() 470 { 471 472 init_TSC(); 473 } 474 475 void 476 cpu_initclocks(void) 477 { 478 479 cpu_initclocks_bsp(); 480 } 481 482 static int 483 sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS) 484 { 485 int error; 486 u_int freq; 487 488 /* 489 * Use `i8254' instead of `timer' in external names because `timer' 490 * is too generic. Should use it everywhere. 491 */ 492 freq = i8254_freq; 493 error = sysctl_handle_int(oidp, &freq, 0, req); 494 if (error == 0 && req->newptr != NULL) { 495 i8254_freq = freq; 496 if (attimer_sc != NULL) { 497 set_i8254_freq(attimer_sc->mode, attimer_sc->period); 498 attimer_sc->tc.tc_frequency = freq; 499 } else { 500 set_i8254_freq(MODE_STOP, 0); 501 } 502 } 503 return (error); 504 } 505 506 SYSCTL_PROC(_machdep, OID_AUTO, i8254_freq, CTLTYPE_INT | CTLFLAG_RW, 507 0, sizeof(u_int), sysctl_machdep_i8254_freq, "IU", 508 "i8254 timer frequency"); 509 510 static unsigned 511 i8254_get_timecount(struct timecounter *tc) 512 { 513 device_t dev = (device_t)tc->tc_priv; 514 struct attimer_softc *sc = device_get_softc(dev); 515 register_t flags; 516 uint16_t count; 517 u_int high, low; 518 519 if (sc->period == 0) 520 return (i8254_max_count - getit()); 521 522 #ifdef __amd64__ 523 flags = read_rflags(); 524 #else 525 flags = read_eflags(); 526 #endif 527 mtx_lock_spin(&clock_lock); 528 529 /* Select timer0 and latch counter value. */ 530 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); 531 532 low = inb(TIMER_CNTR0); 533 high = inb(TIMER_CNTR0); 534 count = i8254_max_count - ((high << 8) | low); 535 if (count < i8254_lastcount || 536 (!i8254_ticked && (clkintr_pending || 537 ((count < 20 || (!(flags & PSL_I) && 538 count < i8254_max_count / 2u)) && 539 i8254_pending != NULL && i8254_pending(i8254_intsrc))))) { 540 i8254_ticked = 1; 541 i8254_offset += i8254_max_count; 542 } 543 i8254_lastcount = count; 544 count += i8254_offset; 545 mtx_unlock_spin(&clock_lock); 546 return (count); 547 } 548 549 static int 550 attimer_start(struct eventtimer *et, sbintime_t first, sbintime_t period) 551 { 552 device_t dev = (device_t)et->et_priv; 553 struct attimer_softc *sc = device_get_softc(dev); 554 555 if (period != 0) { 556 sc->mode = MODE_PERIODIC; 557 sc->period = period; 558 } else { 559 sc->mode = MODE_ONESHOT; 560 sc->period = first; 561 } 562 if (!sc->intr_en) { 563 i8254_intsrc->is_pic->pic_enable_source(i8254_intsrc); 564 sc->intr_en = 1; 565 } 566 set_i8254_freq(sc->mode, sc->period); 567 return (0); 568 } 569 570 static int 571 attimer_stop(struct eventtimer *et) 572 { 573 device_t dev = (device_t)et->et_priv; 574 struct attimer_softc *sc = device_get_softc(dev); 575 576 sc->mode = MODE_STOP; 577 sc->period = 0; 578 set_i8254_freq(sc->mode, sc->period); 579 return (0); 580 } 581 582 #ifdef DEV_ISA 583 /* 584 * Attach to the ISA PnP descriptors for the timer 585 */ 586 static struct isa_pnp_id attimer_ids[] = { 587 { 0x0001d041 /* PNP0100 */, "AT timer" }, 588 { 0 } 589 }; 590 591 #ifdef PC98 592 static void 593 pc98_alloc_resource(device_t dev) 594 { 595 static bus_addr_t iat1[] = {0, 2, 4, 6}; 596 static bus_addr_t iat2[] = {0, 4}; 597 struct attimer_softc *sc; 598 599 sc = device_get_softc(dev); 600 601 sc->port_rid = 0; 602 bus_set_resource(dev, SYS_RES_IOPORT, sc->port_rid, IO_TIMER1, 1); 603 sc->port_res = isa_alloc_resourcev(dev, SYS_RES_IOPORT, 604 &sc->port_rid, iat1, 4, RF_ACTIVE); 605 if (sc->port_res == NULL) 606 device_printf(dev, "Warning: Couldn't map I/O.\n"); 607 else 608 isa_load_resourcev(sc->port_res, iat1, 4); 609 610 sc->port_rid2 = 4; 611 bus_set_resource(dev, SYS_RES_IOPORT, sc->port_rid2, TIMER_CNTR1, 1); 612 sc->port_res2 = isa_alloc_resourcev(dev, SYS_RES_IOPORT, 613 &sc->port_rid2, iat2, 2, RF_ACTIVE); 614 if (sc->port_res2 == NULL) 615 device_printf(dev, "Warning: Couldn't map I/O.\n"); 616 else 617 isa_load_resourcev(sc->port_res2, iat2, 2); 618 } 619 620 static void 621 pc98_release_resource(device_t dev) 622 { 623 struct attimer_softc *sc; 624 625 sc = device_get_softc(dev); 626 627 if (sc->port_res) 628 bus_release_resource(dev, SYS_RES_IOPORT, sc->port_rid, 629 sc->port_res); 630 if (sc->port_res2) 631 bus_release_resource(dev, SYS_RES_IOPORT, sc->port_rid2, 632 sc->port_res2); 633 } 634 #endif 635 636 static int 637 attimer_probe(device_t dev) 638 { 639 int result; 640 641 result = ISA_PNP_PROBE(device_get_parent(dev), dev, attimer_ids); 642 /* ENOENT means no PnP-ID, device is hinted. */ 643 if (result == ENOENT) { 644 device_set_desc(dev, "AT timer"); 645 #ifdef PC98 646 /* To print resources correctly. */ 647 pc98_alloc_resource(dev); 648 pc98_release_resource(dev); 649 #endif 650 return (BUS_PROBE_LOW_PRIORITY); 651 } 652 return (result); 653 } 654 655 static int 656 attimer_attach(device_t dev) 657 { 658 struct attimer_softc *sc; 659 rman_res_t s; 660 int i; 661 662 attimer_sc = sc = device_get_softc(dev); 663 bzero(sc, sizeof(struct attimer_softc)); 664 #ifdef PC98 665 pc98_alloc_resource(dev); 666 #else 667 if (!(sc->port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, 668 &sc->port_rid, IO_TIMER1, IO_TIMER1 + 3, 4, RF_ACTIVE))) 669 device_printf(dev,"Warning: Couldn't map I/O.\n"); 670 #endif 671 i8254_intsrc = intr_lookup_source(0); 672 if (i8254_intsrc != NULL) 673 i8254_pending = i8254_intsrc->is_pic->pic_source_pending; 674 resource_int_value(device_get_name(dev), device_get_unit(dev), 675 "timecounter", &i8254_timecounter); 676 set_i8254_freq(MODE_STOP, 0); 677 if (i8254_timecounter) { 678 sc->tc.tc_get_timecount = i8254_get_timecount; 679 sc->tc.tc_counter_mask = 0xffff; 680 sc->tc.tc_frequency = i8254_freq; 681 sc->tc.tc_name = "i8254"; 682 sc->tc.tc_quality = 0; 683 sc->tc.tc_priv = dev; 684 tc_init(&sc->tc); 685 } 686 if (resource_int_value(device_get_name(dev), device_get_unit(dev), 687 "clock", &i) != 0 || i != 0) { 688 sc->intr_rid = 0; 689 while (bus_get_resource(dev, SYS_RES_IRQ, sc->intr_rid, 690 &s, NULL) == 0 && s != 0) 691 sc->intr_rid++; 692 if (!(sc->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ, 693 &sc->intr_rid, 0, 0, 1, RF_ACTIVE))) { 694 device_printf(dev,"Can't map interrupt.\n"); 695 return (0); 696 } 697 /* Dirty hack, to make bus_setup_intr to not enable source. */ 698 i8254_intsrc->is_handlers++; 699 if ((bus_setup_intr(dev, sc->intr_res, 700 INTR_MPSAFE | INTR_TYPE_CLK, 701 (driver_filter_t *)clkintr, NULL, 702 sc, &sc->intr_handler))) { 703 device_printf(dev, "Can't setup interrupt.\n"); 704 i8254_intsrc->is_handlers--; 705 return (0); 706 } 707 i8254_intsrc->is_handlers--; 708 i8254_intsrc->is_pic->pic_enable_intr(i8254_intsrc); 709 sc->et.et_name = "i8254"; 710 sc->et.et_flags = ET_FLAGS_PERIODIC; 711 if (!i8254_timecounter) 712 sc->et.et_flags |= ET_FLAGS_ONESHOT; 713 sc->et.et_quality = 100; 714 sc->et.et_frequency = i8254_freq; 715 sc->et.et_min_period = (0x0002LLU << 32) / i8254_freq; 716 sc->et.et_max_period = (0xfffeLLU << 32) / i8254_freq; 717 sc->et.et_start = attimer_start; 718 sc->et.et_stop = attimer_stop; 719 sc->et.et_priv = dev; 720 et_register(&sc->et); 721 } 722 return(0); 723 } 724 725 static int 726 attimer_resume(device_t dev) 727 { 728 729 i8254_restore(); 730 return (0); 731 } 732 733 static device_method_t attimer_methods[] = { 734 /* Device interface */ 735 DEVMETHOD(device_probe, attimer_probe), 736 DEVMETHOD(device_attach, attimer_attach), 737 DEVMETHOD(device_detach, bus_generic_detach), 738 DEVMETHOD(device_shutdown, bus_generic_shutdown), 739 DEVMETHOD(device_suspend, bus_generic_suspend), 740 DEVMETHOD(device_resume, attimer_resume), 741 { 0, 0 } 742 }; 743 744 static driver_t attimer_driver = { 745 "attimer", 746 attimer_methods, 747 sizeof(struct attimer_softc), 748 }; 749 750 static devclass_t attimer_devclass; 751 752 DRIVER_MODULE(attimer, isa, attimer_driver, attimer_devclass, 0, 0); 753 DRIVER_MODULE(attimer, acpi, attimer_driver, attimer_devclass, 0, 0); 754 755 #endif /* DEV_ISA */ 756